5 tristate "Intel Wireless Wifi Core"
6 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
8 select MAC80211_LEDS if IWLWIFI_LEDS
9 select LEDS_CLASS if IWLWIFI_LEDS
10 select RFKILL if IWLWIFI_RFKILL
11 select RFKILL_INPUT if IWLWIFI_RFKILL
17 config IWLWIFI_RUN_TIME_CALIB
22 This option will enable run time calibration for the iwlwifi driver.
23 These calibrations are Sensitivity and Chain Noise.
27 boolean "IWLWIFI RF kill support"
31 tristate "Intel Wireless WiFi 4965AGN"
32 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
36 Select to build the driver supporting the:
38 Intel Wireless WiFi Link 4965AGN
40 This driver uses the kernel's mac80211 subsystem.
42 In order to use this driver, you will need a microcode (uCode)
43 image for it. You can obtain the microcode from:
45 <http://intellinuxwireless.org/>.
47 The microcode is typically installed in /lib/firmware. You can
48 look in the hotplug script /etc/hotplug/firmware.agent to
49 determine which directory FIRMWARE_DIR is set to when the script
52 If you want to compile the driver as a module ( = code which can be
53 inserted in and removed from the running kernel whenever you want),
54 say M here and read <file:Documentation/kbuild/modules.txt>. The
55 module will be called iwl4965.ko.
58 bool "Enable 802.11n HT features in iwl4965 driver"
59 depends on EXPERIMENTAL
62 This option enables IEEE 802.11n High Throughput features
63 for the iwl4965 driver.
66 bool "Enable LEDS features in iwl4965 driver"
70 This option enables LEDS for the iwlwifi drivers
73 config IWL4965_SPECTRUM_MEASUREMENT
74 bool "Enable Spectrum Measurement in iwl4965 driver"
77 This option will enable spectrum measurement for the iwl4965 driver.
79 config IWL4965_RUN_TIME_CALIB
80 bool "Enable run time Calibration for 4965 NIC"
81 select IWLWIFI_RUN_TIME_CALIB
85 This option will enable run time calibration for the iwl4965 driver.
86 These calibrations are Sensitivity and Chain Noise. If unsure, say yes
89 bool "Enable full debugging output in iwl4965 driver"
92 This option will enable debug tracing output for the iwl4965
95 This will result in the kernel module being ~100k larger. You can
96 control which debug output is sent to the kernel log by setting the
99 /sys/class/net/wlan0/device/debug_level
101 This entry will only exist if this option is enabled.
103 To set a value, simply echo an 8-byte hex value to the same file:
105 % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
107 You can find the list of debug mask values in:
108 drivers/net/wireless/iwlwifi/iwl-4965-debug.h
110 If this is your first time using this driver, you should say Y here
111 as the debug information can assist others in helping you resolve
112 any problems you may encounter.
115 bool "Intel Wireless WiFi 5000AGN"
118 This option enables support for Intel Wireless WiFi Link 5000AGN Family
119 Dependency on 4965 is temporary
121 config IWL5000_RUN_TIME_CALIB
122 bool "Enable run time Calibration for 5000 NIC"
123 select IWLWIFI_RUN_TIME_CALIB
127 This option will enable run time calibration for the iwl5000 driver.
128 These calibrations are Sensitivity and Chain Noise. If unsure, say yes
131 config IWLWIFI_DEBUGFS
132 bool "Iwlwifi debugfs support"
133 depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
135 Enable creation of debugfs files for the iwlwifi drivers.
138 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
139 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
142 select MAC80211_LEDS if IWL3945_LEDS
143 select LEDS_CLASS if IWL3945_LEDS
145 Select to build the driver supporting the:
147 Intel PRO/Wireless 3945ABG/BG Network Connection
149 This driver uses the kernel's mac80211 subsystem.
151 In order to use this driver, you will need a microcode (uCode)
152 image for it. You can obtain the microcode from:
154 <http://intellinuxwireless.org/>.
156 The microcode is typically installed in /lib/firmware. You can
157 look in the hotplug script /etc/hotplug/firmware.agent to
158 determine which directory FIRMWARE_DIR is set to when the script
161 If you want to compile the driver as a module ( = code which can be
162 inserted in and removed from the running kernel whenever you want),
163 say M here and read <file:Documentation/kbuild/modules.txt>. The
164 module will be called iwl3945.ko.
166 config IWL3945_SPECTRUM_MEASUREMENT
167 bool "Enable Spectrum Measurement in iwl3945 drivers"
170 This option will enable spectrum measurement for the iwl3945 driver.
173 bool "Enable LEDS features in iwl3945 driver"
176 This option enables LEDS for the iwl3945 driver.
179 bool "Enable full debugging output in iwl3945 driver"
182 This option will enable debug tracing output for the iwl3945
185 This will result in the kernel module being ~100k larger. You can
186 control which debug output is sent to the kernel log by setting the
189 /sys/bus/pci/drivers/${DRIVER}/debug_level
191 This entry will only exist if this option is enabled.
193 To set a value, simply echo an 8-byte hex value to the same file:
195 % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
197 You can find the list of debug mask values in:
198 drivers/net/wireless/iwlwifi/iwl-3945-debug.h
200 If this is your first time using this driver, you should say Y here
201 as the debug information can assist others in helping you resolve
202 any problems you may encounter.