6 tristate "Intel Wireless Wifi Core"
7 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
9 select MAC80211_LEDS if IWLWIFI_LEDS
10 select LEDS_CLASS if IWLWIFI_LEDS
11 select RFKILL if IWLWIFI_RFKILL
12 select RFKILL_INPUT if IWLWIFI_RFKILL
19 boolean "IWLWIFI RF kill support"
23 tristate "Intel Wireless WiFi 4965AGN"
24 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
28 Select to build the driver supporting the:
30 Intel Wireless WiFi Link 4965AGN
32 This driver uses the kernel's mac80211 subsystem.
34 In order to use this driver, you will need a microcode (uCode)
35 image for it. You can obtain the microcode from:
37 <http://intellinuxwireless.org/>.
39 The microcode is typically installed in /lib/firmware. You can
40 look in the hotplug script /etc/hotplug/firmware.agent to
41 determine which directory FIRMWARE_DIR is set to when the script
44 If you want to compile the driver as a module ( = code which can be
45 inserted in and removed from the running kernel whenever you want),
46 say M here and read <file:Documentation/kbuild/modules.txt>. The
47 module will be called iwl4965.ko.
50 bool "Enable 802.11n HT features in iwl4965 driver"
51 depends on EXPERIMENTAL
54 This option enables IEEE 802.11n High Throughput features
55 for the iwl4965 driver.
58 bool "Enable LEDS features in iwl4965 driver"
62 This option enables LEDS for the iwlwifi drivers
65 config IWL4965_SPECTRUM_MEASUREMENT
66 bool "Enable Spectrum Measurement in iwl4965 driver"
69 This option will enable spectrum measurement for the iwl4965 driver.
71 config IWL4965_SENSITIVITY
72 bool "Enable Sensitivity Calibration in iwl4965 driver"
75 This option will enable sensitivity calibration for the iwl4965
79 bool "Enable full debugging output in iwl4965 driver"
82 This option will enable debug tracing output for the iwl4965
85 This will result in the kernel module being ~100k larger. You can
86 control which debug output is sent to the kernel log by setting the
89 /sys/bus/pci/drivers/${DRIVER}/debug_level
91 This entry will only exist if this option is enabled.
93 To set a value, simply echo an 8-byte hex value to the same file:
95 % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
97 You can find the list of debug mask values in:
98 drivers/net/wireless/iwlwifi/iwl-4965-debug.h
100 If this is your first time using this driver, you should say Y here
101 as the debug information can assist others in helping you resolve
102 any problems you may encounter.
104 config IWLWIFI_DEBUGFS
105 bool "Iwlwifi debugfs support"
106 depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
108 Enable creation of debugfs files for the iwlwifi drivers.
111 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
112 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
115 select MAC80211_LEDS if IWL3945_LEDS
116 select LEDS_CLASS if IWL3945_LEDS
118 Select to build the driver supporting the:
120 Intel PRO/Wireless 3945ABG/BG Network Connection
122 This driver uses the kernel's mac80211 subsystem.
124 In order to use this driver, you will need a microcode (uCode)
125 image for it. You can obtain the microcode from:
127 <http://intellinuxwireless.org/>.
129 The microcode is typically installed in /lib/firmware. You can
130 look in the hotplug script /etc/hotplug/firmware.agent to
131 determine which directory FIRMWARE_DIR is set to when the script
134 If you want to compile the driver as a module ( = code which can be
135 inserted in and removed from the running kernel whenever you want),
136 say M here and read <file:Documentation/kbuild/modules.txt>. The
137 module will be called iwl3945.ko.
139 config IWL3945_SPECTRUM_MEASUREMENT
140 bool "Enable Spectrum Measurement in iwl3945 drivers"
143 This option will enable spectrum measurement for the iwl3945 driver.
146 bool "Enable LEDS features in iwl3945 driver"
149 This option enables LEDS for the iwl3945 driver.
152 bool "Enable full debugging output in iwl3945 driver"
155 This option will enable debug tracing output for the iwl3945
158 This will result in the kernel module being ~100k larger. You can
159 control which debug output is sent to the kernel log by setting the
162 /sys/bus/pci/drivers/${DRIVER}/debug_level
164 This entry will only exist if this option is enabled.
166 To set a value, simply echo an 8-byte hex value to the same file:
168 % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
170 You can find the list of debug mask values in:
171 drivers/net/wireless/iwlwifi/iwl-3945-debug.h
173 If this is your first time using this driver, you should say Y here
174 as the debug information can assist others in helping you resolve
175 any problems you may encounter.