err.no Git - linux-2.6/blob - drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10
  11   Some parts of the code in this file are derived from the ipw2200
  12   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  13
  14   This program is free software; you can redistribute it and/or modify
  15   it under the terms of the GNU General Public License as published by
  16   the Free Software Foundation; either version 2 of the License, or
  17   (at your option) any later version.
  18
  19   This program is distributed in the hope that it will be useful,
  20   but WITHOUT ANY WARRANTY; without even the implied warranty of
  21   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22   GNU General Public License for more details.
  23
  24   You should have received a copy of the GNU General Public License
  25   along with this program; see the file COPYING.  If not, write to
  26   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  27   Boston, MA 02110-1301, USA.
  28
  29 */
  30
  31 #include <linux/delay.h>
  32 #include <linux/init.h>
  33 #include <linux/moduleparam.h>
  34 #include <linux/if_arp.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/version.h>
  37 #include <linux/firmware.h>
  38 #include <linux/wireless.h>
  39 #include <linux/workqueue.h>
  40 #include <linux/skbuff.h>
  41 #include <linux/io.h>
  42 #include <linux/dma-mapping.h>
  43 #include <asm/unaligned.h>
  44
  45 #include "b43.h"
  46 #include "main.h"
  47 #include "debugfs.h"
  48 #include "phy.h"
  49 #include "nphy.h"
  50 #include "dma.h"
  51 #include "pio.h"
  52 #include "sysfs.h"
  53 #include "xmit.h"
  54 #include "lo.h"
  55 #include "pcmcia.h"
  56
  57 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  58 MODULE_AUTHOR("Martin Langer");
  59 MODULE_AUTHOR("Stefano Brivio");
  60 MODULE_AUTHOR("Michael Buesch");
  61 MODULE_LICENSE("GPL");
  62
  63 MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
  64
  65
  66 static int modparam_bad_frames_preempt;
  67 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  68 MODULE_PARM_DESC(bad_frames_preempt,
  69                  "enable(1) / disable(0) Bad Frames Preemption");
  70
  71 static char modparam_fwpostfix[16];
  72 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  73 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  74
  75 static int modparam_hwpctl;
  76 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  77 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  78
  79 static int modparam_nohwcrypt;
  80 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  81 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  82
  83 int b43_modparam_qos = 1;
  84 module_param_named(qos, b43_modparam_qos, int, 0444);
  85 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
  86
  87
  88 static const struct ssb_device_id b43_ssb_tbl[] = {
  89         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
  90         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
  91         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
  92         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
  93         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
  94         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
  95         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
  96         SSB_DEVTABLE_END
  97 };
  98
  99 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
 100
 101 /* Channel and ratetables are shared for all devices.
 102  * They can't be const, because ieee80211 puts some precalculated
 103  * data in there. This data is the same for all devices, so we don't
 104  * get concurrency issues */
 105 #define RATETAB_ENT(_rateid, _flags) \
 106         {                                                               \
 107                 .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
 108                 .hw_value       = (_rateid),                            \
 109                 .flags          = (_flags),                             \
 110         }
 111
 112 /*
 113  * NOTE: When changing this, sync with xmit.c's
 114  *       b43_plcp_get_bitrate_idx_* functions!
 115  */
 116 static struct ieee80211_rate __b43_ratetable[] = {
 117         RATETAB_ENT(B43_CCK_RATE_1MB, 0),
 118         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
 119         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
 120         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
 121         RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
 122         RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
 123         RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
 124         RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
 125         RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
 126         RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
 127         RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
 128         RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 129 };
 130
 131 #define b43_a_ratetable         (__b43_ratetable + 4)
 132 #define b43_a_ratetable_size    8
 133 #define b43_b_ratetable         (__b43_ratetable + 0)
 134 #define b43_b_ratetable_size    4
 135 #define b43_g_ratetable         (__b43_ratetable + 0)
 136 #define b43_g_ratetable_size    12
 137
 138 #define CHAN4G(_channel, _freq, _flags) {                       \
 139         .band                   = IEEE80211_BAND_2GHZ,          \
 140         .center_freq            = (_freq),                      \
 141         .hw_value               = (_channel),                   \
 142         .flags                  = (_flags),                     \
 143         .max_antenna_gain       = 0,                            \
 144         .max_power              = 30,                           \
 145 }
 146 static struct ieee80211_channel b43_2ghz_chantable[] = {
 147         CHAN4G(1, 2412, 0),
 148         CHAN4G(2, 2417, 0),
 149         CHAN4G(3, 2422, 0),
 150         CHAN4G(4, 2427, 0),
 151         CHAN4G(5, 2432, 0),
 152         CHAN4G(6, 2437, 0),
 153         CHAN4G(7, 2442, 0),
 154         CHAN4G(8, 2447, 0),
 155         CHAN4G(9, 2452, 0),
 156         CHAN4G(10, 2457, 0),
 157         CHAN4G(11, 2462, 0),
 158         CHAN4G(12, 2467, 0),
 159         CHAN4G(13, 2472, 0),
 160         CHAN4G(14, 2484, 0),
 161 };
 162 #undef CHAN4G
 163
 164 #define CHAN5G(_channel, _flags) {                              \
 165         .band                   = IEEE80211_BAND_5GHZ,          \
 166         .center_freq            = 5000 + (5 * (_channel)),      \
 167         .hw_value               = (_channel),                   \
 168         .flags                  = (_flags),                     \
 169         .max_antenna_gain       = 0,                            \
 170         .max_power              = 30,                           \
 171 }
 172 static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 173         CHAN5G(32, 0),          CHAN5G(34, 0),
 174         CHAN5G(36, 0),          CHAN5G(38, 0),
 175         CHAN5G(40, 0),          CHAN5G(42, 0),
 176         CHAN5G(44, 0),          CHAN5G(46, 0),
 177         CHAN5G(48, 0),          CHAN5G(50, 0),
 178         CHAN5G(52, 0),          CHAN5G(54, 0),
 179         CHAN5G(56, 0),          CHAN5G(58, 0),
 180         CHAN5G(60, 0),          CHAN5G(62, 0),
 181         CHAN5G(64, 0),          CHAN5G(66, 0),
 182         CHAN5G(68, 0),          CHAN5G(70, 0),
 183         CHAN5G(72, 0),          CHAN5G(74, 0),
 184         CHAN5G(76, 0),          CHAN5G(78, 0),
 185         CHAN5G(80, 0),          CHAN5G(82, 0),
 186         CHAN5G(84, 0),          CHAN5G(86, 0),
 187         CHAN5G(88, 0),          CHAN5G(90, 0),
 188         CHAN5G(92, 0),          CHAN5G(94, 0),
 189         CHAN5G(96, 0),          CHAN5G(98, 0),
 190         CHAN5G(100, 0),         CHAN5G(102, 0),
 191         CHAN5G(104, 0),         CHAN5G(106, 0),
 192         CHAN5G(108, 0),         CHAN5G(110, 0),
 193         CHAN5G(112, 0),         CHAN5G(114, 0),
 194         CHAN5G(116, 0),         CHAN5G(118, 0),
 195         CHAN5G(120, 0),         CHAN5G(122, 0),
 196         CHAN5G(124, 0),         CHAN5G(126, 0),
 197         CHAN5G(128, 0),         CHAN5G(130, 0),
 198         CHAN5G(132, 0),         CHAN5G(134, 0),
 199         CHAN5G(136, 0),         CHAN5G(138, 0),
 200         CHAN5G(140, 0),         CHAN5G(142, 0),
 201         CHAN5G(144, 0),         CHAN5G(145, 0),
 202         CHAN5G(146, 0),         CHAN5G(147, 0),
 203         CHAN5G(148, 0),         CHAN5G(149, 0),
 204         CHAN5G(150, 0),         CHAN5G(151, 0),
 205         CHAN5G(152, 0),         CHAN5G(153, 0),
 206         CHAN5G(154, 0),         CHAN5G(155, 0),
 207         CHAN5G(156, 0),         CHAN5G(157, 0),
 208         CHAN5G(158, 0),         CHAN5G(159, 0),
 209         CHAN5G(160, 0),         CHAN5G(161, 0),
 210         CHAN5G(162, 0),         CHAN5G(163, 0),
 211         CHAN5G(164, 0),         CHAN5G(165, 0),
 212         CHAN5G(166, 0),         CHAN5G(168, 0),
 213         CHAN5G(170, 0),         CHAN5G(172, 0),
 214         CHAN5G(174, 0),         CHAN5G(176, 0),
 215         CHAN5G(178, 0),         CHAN5G(180, 0),
 216         CHAN5G(182, 0),         CHAN5G(184, 0),
 217         CHAN5G(186, 0),         CHAN5G(188, 0),
 218         CHAN5G(190, 0),         CHAN5G(192, 0),
 219         CHAN5G(194, 0),         CHAN5G(196, 0),
 220         CHAN5G(198, 0),         CHAN5G(200, 0),
 221         CHAN5G(202, 0),         CHAN5G(204, 0),
 222         CHAN5G(206, 0),         CHAN5G(208, 0),
 223         CHAN5G(210, 0),         CHAN5G(212, 0),
 224         CHAN5G(214, 0),         CHAN5G(216, 0),
 225         CHAN5G(218, 0),         CHAN5G(220, 0),
 226         CHAN5G(222, 0),         CHAN5G(224, 0),
 227         CHAN5G(226, 0),         CHAN5G(228, 0),
 228 };
 229
 230 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 231         CHAN5G(34, 0),          CHAN5G(36, 0),
 232         CHAN5G(38, 0),          CHAN5G(40, 0),
 233         CHAN5G(42, 0),          CHAN5G(44, 0),
 234         CHAN5G(46, 0),          CHAN5G(48, 0),
 235         CHAN5G(52, 0),          CHAN5G(56, 0),
 236         CHAN5G(60, 0),          CHAN5G(64, 0),
 237         CHAN5G(100, 0),         CHAN5G(104, 0),
 238         CHAN5G(108, 0),         CHAN5G(112, 0),
 239         CHAN5G(116, 0),         CHAN5G(120, 0),
 240         CHAN5G(124, 0),         CHAN5G(128, 0),
 241         CHAN5G(132, 0),         CHAN5G(136, 0),
 242         CHAN5G(140, 0),         CHAN5G(149, 0),
 243         CHAN5G(153, 0),         CHAN5G(157, 0),
 244         CHAN5G(161, 0),         CHAN5G(165, 0),
 245         CHAN5G(184, 0),         CHAN5G(188, 0),
 246         CHAN5G(192, 0),         CHAN5G(196, 0),
 247         CHAN5G(200, 0),         CHAN5G(204, 0),
 248         CHAN5G(208, 0),         CHAN5G(212, 0),
 249         CHAN5G(216, 0),
 250 };
 251 #undef CHAN5G
 252
 253 static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 254         .band           = IEEE80211_BAND_5GHZ,
 255         .channels       = b43_5ghz_nphy_chantable,
 256         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
 257         .bitrates       = b43_a_ratetable,
 258         .n_bitrates     = b43_a_ratetable_size,
 259 };
 260
 261 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 262         .band           = IEEE80211_BAND_5GHZ,
 263         .channels       = b43_5ghz_aphy_chantable,
 264         .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
 265         .bitrates       = b43_a_ratetable,
 266         .n_bitrates     = b43_a_ratetable_size,
 267 };
 268
 269 static struct ieee80211_supported_band b43_band_2GHz = {
 270         .band           = IEEE80211_BAND_2GHZ,
 271         .channels       = b43_2ghz_chantable,
 272         .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
 273         .bitrates       = b43_g_ratetable,
 274         .n_bitrates     = b43_g_ratetable_size,
 275 };
 276
 277 static void b43_wireless_core_exit(struct b43_wldev *dev);
 278 static int b43_wireless_core_init(struct b43_wldev *dev);
 279 static void b43_wireless_core_stop(struct b43_wldev *dev);
 280 static int b43_wireless_core_start(struct b43_wldev *dev);
 281
 282 static int b43_ratelimit(struct b43_wl *wl)
 283 {
 284         if (!wl || !wl->current_dev)
 285                 return 1;
 286         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 287                 return 1;
 288         /* We are up and running.
 289          * Ratelimit the messages to avoid DoS over the net. */
 290         return net_ratelimit();
 291 }
 292
 293 void b43info(struct b43_wl *wl, const char *fmt, ...)
 294 {
 295         va_list args;
 296
 297         if (!b43_ratelimit(wl))
 298                 return;
 299         va_start(args, fmt);
 300         printk(KERN_INFO "b43-%s: ",
 301                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 302         vprintk(fmt, args);
 303         va_end(args);
 304 }
 305
 306 void b43err(struct b43_wl *wl, const char *fmt, ...)
 307 {
 308         va_list args;
 309
 310         if (!b43_ratelimit(wl))
 311                 return;
 312         va_start(args, fmt);
 313         printk(KERN_ERR "b43-%s ERROR: ",
 314                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 315         vprintk(fmt, args);
 316         va_end(args);
 317 }
 318
 319 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 320 {
 321         va_list args;
 322
 323         if (!b43_ratelimit(wl))
 324                 return;
 325         va_start(args, fmt);
 326         printk(KERN_WARNING "b43-%s warning: ",
 327                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 328         vprintk(fmt, args);
 329         va_end(args);
 330 }
 331
 332 #if B43_DEBUG
 333 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 334 {
 335         va_list args;
 336
 337         va_start(args, fmt);
 338         printk(KERN_DEBUG "b43-%s debug: ",
 339                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
 340         vprintk(fmt, args);
 341         va_end(args);
 342 }
 343 #endif /* DEBUG */
 344
 345 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 346 {
 347         u32 macctl;
 348
 349         B43_WARN_ON(offset % 4 != 0);
 350
 351         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 352         if (macctl & B43_MACCTL_BE)
 353                 val = swab32(val);
 354
 355         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 356         mmiowb();
 357         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 358 }
 359
 360 static inline void b43_shm_control_word(struct b43_wldev *dev,
 361                                         u16 routing, u16 offset)
 362 {
 363         u32 control;
 364
 365         /* "offset" is the WORD offset. */
 366         control = routing;
 367         control <<= 16;
 368         control |= offset;
 369         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 370 }
 371
 372 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 373 {
 374         struct b43_wl *wl = dev->wl;
 375         unsigned long flags;
 376         u32 ret;
 377
 378         spin_lock_irqsave(&wl->shm_lock, flags);
 379         if (routing == B43_SHM_SHARED) {
 380                 B43_WARN_ON(offset & 0x0001);
 381                 if (offset & 0x0003) {
 382                         /* Unaligned access */
 383                         b43_shm_control_word(dev, routing, offset >> 2);
 384                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 385                         ret <<= 16;
 386                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 387                         ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
 388
 389                         goto out;
 390                 }
 391                 offset >>= 2;
 392         }
 393         b43_shm_control_word(dev, routing, offset);
 394         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 395 out:
 396         spin_unlock_irqrestore(&wl->shm_lock, flags);
 397
 398         return ret;
 399 }
 400
 401 u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
 402 {
 403         struct b43_wl *wl = dev->wl;
 404         unsigned long flags;
 405         u16 ret;
 406
 407         spin_lock_irqsave(&wl->shm_lock, flags);
 408         if (routing == B43_SHM_SHARED) {
 409                 B43_WARN_ON(offset & 0x0001);
 410                 if (offset & 0x0003) {
 411                         /* Unaligned access */
 412                         b43_shm_control_word(dev, routing, offset >> 2);
 413                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 414
 415                         goto out;
 416                 }
 417                 offset >>= 2;
 418         }
 419         b43_shm_control_word(dev, routing, offset);
 420         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 421 out:
 422         spin_unlock_irqrestore(&wl->shm_lock, flags);
 423
 424         return ret;
 425 }
 426
 427 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 428 {
 429         struct b43_wl *wl = dev->wl;
 430         unsigned long flags;
 431
 432         spin_lock_irqsave(&wl->shm_lock, flags);
 433         if (routing == B43_SHM_SHARED) {
 434                 B43_WARN_ON(offset & 0x0001);
 435                 if (offset & 0x0003) {
 436                         /* Unaligned access */
 437                         b43_shm_control_word(dev, routing, offset >> 2);
 438                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 439                                     (value >> 16) & 0xffff);
 440                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 441                         b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
 442                         goto out;
 443                 }
 444                 offset >>= 2;
 445         }
 446         b43_shm_control_word(dev, routing, offset);
 447         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 448 out:
 449         spin_unlock_irqrestore(&wl->shm_lock, flags);
 450 }
 451
 452 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 453 {
 454         struct b43_wl *wl = dev->wl;
 455         unsigned long flags;
 456
 457         spin_lock_irqsave(&wl->shm_lock, flags);
 458         if (routing == B43_SHM_SHARED) {
 459                 B43_WARN_ON(offset & 0x0001);
 460                 if (offset & 0x0003) {
 461                         /* Unaligned access */
 462                         b43_shm_control_word(dev, routing, offset >> 2);
 463                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 464                         goto out;
 465                 }
 466                 offset >>= 2;
 467         }
 468         b43_shm_control_word(dev, routing, offset);
 469         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 470 out:
 471         spin_unlock_irqrestore(&wl->shm_lock, flags);
 472 }
 473
 474 /* Read HostFlags */
 475 u64 b43_hf_read(struct b43_wldev * dev)
 476 {
 477         u64 ret;
 478
 479         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 480         ret <<= 16;
 481         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI);
 482         ret <<= 16;
 483         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 484
 485         return ret;
 486 }
 487
 488 /* Write HostFlags */
 489 void b43_hf_write(struct b43_wldev *dev, u64 value)
 490 {
 491         u16 lo, mi, hi;
 492
 493         lo = (value & 0x00000000FFFFULL);
 494         mi = (value & 0x0000FFFF0000ULL) >> 16;
 495         hi = (value & 0xFFFF00000000ULL) >> 32;
 496         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo);
 497         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi);
 498         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 499 }
 500
 501 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
 502 {
 503         /* We need to be careful. As we read the TSF from multiple
 504          * registers, we should take care of register overflows.
 505          * In theory, the whole tsf read process should be atomic.
 506          * We try to be atomic here, by restaring the read process,
 507          * if any of the high registers changed (overflew).
 508          */
 509         if (dev->dev->id.revision >= 3) {
 510                 u32 low, high, high2;
 511
 512                 do {
 513                         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 514                         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 515                         high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 516                 } while (unlikely(high != high2));
 517
 518                 *tsf = high;
 519                 *tsf <<= 32;
 520                 *tsf |= low;
 521         } else {
 522                 u64 tmp;
 523                 u16 v0, v1, v2, v3;
 524                 u16 test1, test2, test3;
 525
 526                 do {
 527                         v3 = b43_read16(dev, B43_MMIO_TSF_3);
 528                         v2 = b43_read16(dev, B43_MMIO_TSF_2);
 529                         v1 = b43_read16(dev, B43_MMIO_TSF_1);
 530                         v0 = b43_read16(dev, B43_MMIO_TSF_0);
 531
 532                         test3 = b43_read16(dev, B43_MMIO_TSF_3);
 533                         test2 = b43_read16(dev, B43_MMIO_TSF_2);
 534                         test1 = b43_read16(dev, B43_MMIO_TSF_1);
 535                 } while (v3 != test3 || v2 != test2 || v1 != test1);
 536
 537                 *tsf = v3;
 538                 *tsf <<= 48;
 539                 tmp = v2;
 540                 tmp <<= 32;
 541                 *tsf |= tmp;
 542                 tmp = v1;
 543                 tmp <<= 16;
 544                 *tsf |= tmp;
 545                 *tsf |= v0;
 546         }
 547 }
 548
 549 static void b43_time_lock(struct b43_wldev *dev)
 550 {
 551         u32 macctl;
 552
 553         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 554         macctl |= B43_MACCTL_TBTTHOLD;
 555         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 556         /* Commit the write */
 557         b43_read32(dev, B43_MMIO_MACCTL);
 558 }
 559
 560 static void b43_time_unlock(struct b43_wldev *dev)
 561 {
 562         u32 macctl;
 563
 564         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 565         macctl &= ~B43_MACCTL_TBTTHOLD;
 566         b43_write32(dev, B43_MMIO_MACCTL, macctl);
 567         /* Commit the write */
 568         b43_read32(dev, B43_MMIO_MACCTL);
 569 }
 570
 571 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 572 {
 573         /* Be careful with the in-progress timer.
 574          * First zero out the low register, so we have a full
 575          * register-overflow duration to complete the operation.
 576          */
 577         if (dev->dev->id.revision >= 3) {
 578                 u32 lo = (tsf & 0x00000000FFFFFFFFULL);
 579                 u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
 580
 581                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0);
 582                 mmiowb();
 583                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi);
 584                 mmiowb();
 585                 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo);
 586         } else {
 587                 u16 v0 = (tsf & 0x000000000000FFFFULL);
 588                 u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
 589                 u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
 590                 u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
 591
 592                 b43_write16(dev, B43_MMIO_TSF_0, 0);
 593                 mmiowb();
 594                 b43_write16(dev, B43_MMIO_TSF_3, v3);
 595                 mmiowb();
 596                 b43_write16(dev, B43_MMIO_TSF_2, v2);
 597                 mmiowb();
 598                 b43_write16(dev, B43_MMIO_TSF_1, v1);
 599                 mmiowb();
 600                 b43_write16(dev, B43_MMIO_TSF_0, v0);
 601         }
 602 }
 603
 604 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 605 {
 606         b43_time_lock(dev);
 607         b43_tsf_write_locked(dev, tsf);
 608         b43_time_unlock(dev);
 609 }
 610
 611 static
 612 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
 613 {
 614         static const u8 zero_addr[ETH_ALEN] = { 0 };
 615         u16 data;
 616
 617         if (!mac)
 618                 mac = zero_addr;
 619
 620         offset |= 0x0020;
 621         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 622
 623         data = mac[0];
 624         data |= mac[1] << 8;
 625         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 626         data = mac[2];
 627         data |= mac[3] << 8;
 628         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 629         data = mac[4];
 630         data |= mac[5] << 8;
 631         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 632 }
 633
 634 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 635 {
 636         const u8 *mac;
 637         const u8 *bssid;
 638         u8 mac_bssid[ETH_ALEN * 2];
 639         int i;
 640         u32 tmp;
 641
 642         bssid = dev->wl->bssid;
 643         mac = dev->wl->mac_addr;
 644
 645         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 646
 647         memcpy(mac_bssid, mac, ETH_ALEN);
 648         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 649
 650         /* Write our MAC address and BSSID to template ram */
 651         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 652                 tmp = (u32) (mac_bssid[i + 0]);
 653                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 654                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 655                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 656                 b43_ram_write(dev, 0x20 + i, tmp);
 657         }
 658 }
 659
 660 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 661 {
 662         b43_write_mac_bssid_templates(dev);
 663         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 664 }
 665
 666 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 667 {
 668         /* slot_time is in usec. */
 669         if (dev->phy.type != B43_PHYTYPE_G)
 670                 return;
 671         b43_write16(dev, 0x684, 510 + slot_time);
 672         b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 673 }
 674
 675 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 676 {
 677         b43_set_slot_time(dev, 9);
 678         dev->short_slot = 1;
 679 }
 680
 681 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 682 {
 683         b43_set_slot_time(dev, 20);
 684         dev->short_slot = 0;
 685 }
 686
 687 /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
 688  * Returns the _previously_ enabled IRQ mask.
 689  */
 690 static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
 691 {
 692         u32 old_mask;
 693
 694         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 695         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
 696
 697         return old_mask;
 698 }
 699
 700 /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
 701  * Returns the _previously_ enabled IRQ mask.
 702  */
 703 static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
 704 {
 705         u32 old_mask;
 706
 707         old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 708         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
 709
 710         return old_mask;
 711 }
 712
 713 /* Synchronize IRQ top- and bottom-half.
 714  * IRQs must be masked before calling this.
 715  * This must not be called with the irq_lock held.
 716  */
 717 static void b43_synchronize_irq(struct b43_wldev *dev)
 718 {
 719         synchronize_irq(dev->dev->irq);
 720         tasklet_kill(&dev->isr_tasklet);
 721 }
 722
 723 /* DummyTransmission function, as documented on
 724  * http://bcm-specs.sipsolutions.net/DummyTransmission
 725  */
 726 void b43_dummy_transmission(struct b43_wldev *dev)
 727 {
 728         struct b43_phy *phy = &dev->phy;
 729         unsigned int i, max_loop;
 730         u16 value;
 731         u32 buffer[5] = {
 732                 0x00000000,
 733                 0x00D40000,
 734                 0x00000000,
 735                 0x01000000,
 736                 0x00000000,
 737         };
 738
 739         switch (phy->type) {
 740         case B43_PHYTYPE_A:
 741                 max_loop = 0x1E;
 742                 buffer[0] = 0x000201CC;
 743                 break;
 744         case B43_PHYTYPE_B:
 745         case B43_PHYTYPE_G:
 746                 max_loop = 0xFA;
 747                 buffer[0] = 0x000B846E;
 748                 break;
 749         default:
 750                 B43_WARN_ON(1);
 751                 return;
 752         }
 753
 754         for (i = 0; i < 5; i++)
 755                 b43_ram_write(dev, i * 4, buffer[i]);
 756
 757         /* Commit writes */
 758         b43_read32(dev, B43_MMIO_MACCTL);
 759
 760         b43_write16(dev, 0x0568, 0x0000);
 761         b43_write16(dev, 0x07C0, 0x0000);
 762         value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
 763         b43_write16(dev, 0x050C, value);
 764         b43_write16(dev, 0x0508, 0x0000);
 765         b43_write16(dev, 0x050A, 0x0000);
 766         b43_write16(dev, 0x054C, 0x0000);
 767         b43_write16(dev, 0x056A, 0x0014);
 768         b43_write16(dev, 0x0568, 0x0826);
 769         b43_write16(dev, 0x0500, 0x0000);
 770         b43_write16(dev, 0x0502, 0x0030);
 771
 772         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 773                 b43_radio_write16(dev, 0x0051, 0x0017);
 774         for (i = 0x00; i < max_loop; i++) {
 775                 value = b43_read16(dev, 0x050E);
 776                 if (value & 0x0080)
 777                         break;
 778                 udelay(10);
 779         }
 780         for (i = 0x00; i < 0x0A; i++) {
 781                 value = b43_read16(dev, 0x050E);
 782                 if (value & 0x0400)
 783                         break;
 784                 udelay(10);
 785         }
 786         for (i = 0x00; i < 0x0A; i++) {
 787                 value = b43_read16(dev, 0x0690);
 788                 if (!(value & 0x0100))
 789                         break;
 790                 udelay(10);
 791         }
 792         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 793                 b43_radio_write16(dev, 0x0051, 0x0037);
 794 }
 795
 796 static void key_write(struct b43_wldev *dev,
 797                       u8 index, u8 algorithm, const u8 * key)
 798 {
 799         unsigned int i;
 800         u32 offset;
 801         u16 value;
 802         u16 kidx;
 803
 804         /* Key index/algo block */
 805         kidx = b43_kidx_to_fw(dev, index);
 806         value = ((kidx << 4) | algorithm);
 807         b43_shm_write16(dev, B43_SHM_SHARED,
 808                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 809
 810         /* Write the key to the Key Table Pointer offset */
 811         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 812         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 813                 value = key[i];
 814                 value |= (u16) (key[i + 1]) << 8;
 815                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 816         }
 817 }
 818
 819 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
 820 {
 821         u32 addrtmp[2] = { 0, 0, };
 822         u8 per_sta_keys_start = 8;
 823
 824         if (b43_new_kidx_api(dev))
 825                 per_sta_keys_start = 4;
 826
 827         B43_WARN_ON(index < per_sta_keys_start);
 828         /* We have two default TX keys and possibly two default RX keys.
 829          * Physical mac 0 is mapped to physical key 4 or 8, depending
 830          * on the firmware version.
 831          * So we must adjust the index here.
 832          */
 833         index -= per_sta_keys_start;
 834
 835         if (addr) {
 836                 addrtmp[0] = addr[0];
 837                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 838                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 839                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 840                 addrtmp[1] = addr[4];
 841                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 842         }
 843
 844         if (dev->dev->id.revision >= 5) {
 845                 /* Receive match transmitter address mechanism */
 846                 b43_shm_write32(dev, B43_SHM_RCMTA,
 847                                 (index * 2) + 0, addrtmp[0]);
 848                 b43_shm_write16(dev, B43_SHM_RCMTA,
 849                                 (index * 2) + 1, addrtmp[1]);
 850         } else {
 851                 /* RXE (Receive Engine) and
 852                  * PSM (Programmable State Machine) mechanism
 853                  */
 854                 if (index < 8) {
 855                         /* TODO write to RCM 16, 19, 22 and 25 */
 856                 } else {
 857                         b43_shm_write32(dev, B43_SHM_SHARED,
 858                                         B43_SHM_SH_PSM + (index * 6) + 0,
 859                                         addrtmp[0]);
 860                         b43_shm_write16(dev, B43_SHM_SHARED,
 861                                         B43_SHM_SH_PSM + (index * 6) + 4,
 862                                         addrtmp[1]);
 863                 }
 864         }
 865 }
 866
 867 static void do_key_write(struct b43_wldev *dev,
 868                          u8 index, u8 algorithm,
 869                          const u8 * key, size_t key_len, const u8 * mac_addr)
 870 {
 871         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 872         u8 per_sta_keys_start = 8;
 873
 874         if (b43_new_kidx_api(dev))
 875                 per_sta_keys_start = 4;
 876
 877         B43_WARN_ON(index >= dev->max_nr_keys);
 878         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 879
 880         if (index >= per_sta_keys_start)
 881                 keymac_write(dev, index, NULL); /* First zero out mac. */
 882         if (key)
 883                 memcpy(buf, key, key_len);
 884         key_write(dev, index, algorithm, buf);
 885         if (index >= per_sta_keys_start)
 886                 keymac_write(dev, index, mac_addr);
 887
 888         dev->key[index].algorithm = algorithm;
 889 }
 890
 891 static int b43_key_write(struct b43_wldev *dev,
 892                          int index, u8 algorithm,
 893                          const u8 * key, size_t key_len,
 894                          const u8 * mac_addr,
 895                          struct ieee80211_key_conf *keyconf)
 896 {
 897         int i;
 898         int sta_keys_start;
 899
 900         if (key_len > B43_SEC_KEYSIZE)
 901                 return -EINVAL;
 902         for (i = 0; i < dev->max_nr_keys; i++) {
 903                 /* Check that we don't already have this key. */
 904                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 905         }
 906         if (index < 0) {
 907                 /* Either pairwise key or address is 00:00:00:00:00:00
 908                  * for transmit-only keys. Search the index. */
 909                 if (b43_new_kidx_api(dev))
 910                         sta_keys_start = 4;
 911                 else
 912                         sta_keys_start = 8;
 913                 for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
 914                         if (!dev->key[i].keyconf) {
 915                                 /* found empty */
 916                                 index = i;
 917                                 break;
 918                         }
 919                 }
 920                 if (index < 0) {
 921                         b43err(dev->wl, "Out of hardware key memory\n");
 922                         return -ENOSPC;
 923                 }
 924         } else
 925                 B43_WARN_ON(index > 3);
 926
 927         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
 928         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 929                 /* Default RX key */
 930                 B43_WARN_ON(mac_addr);
 931                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
 932         }
 933         keyconf->hw_key_idx = index;
 934         dev->key[index].keyconf = keyconf;
 935
 936         return 0;
 937 }
 938
 939 static int b43_key_clear(struct b43_wldev *dev, int index)
 940 {
 941         if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
 942                 return -EINVAL;
 943         do_key_write(dev, index, B43_SEC_ALGO_NONE,
 944                      NULL, B43_SEC_KEYSIZE, NULL);
 945         if ((index <= 3) && !b43_new_kidx_api(dev)) {
 946                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
 947                              NULL, B43_SEC_KEYSIZE, NULL);
 948         }
 949         dev->key[index].keyconf = NULL;
 950
 951         return 0;
 952 }
 953
 954 static void b43_clear_keys(struct b43_wldev *dev)
 955 {
 956         int i;
 957
 958         for (i = 0; i < dev->max_nr_keys; i++)
 959                 b43_key_clear(dev, i);
 960 }
 961
 962 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 963 {
 964         u32 macctl;
 965         u16 ucstat;
 966         bool hwps;
 967         bool awake;
 968         int i;
 969
 970         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
 971                     (ps_flags & B43_PS_DISABLED));
 972         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
 973
 974         if (ps_flags & B43_PS_ENABLED) {
 975                 hwps = 1;
 976         } else if (ps_flags & B43_PS_DISABLED) {
 977                 hwps = 0;
 978         } else {
 979                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
 980                 //      and thus is not an AP and we are associated, set bit 25
 981         }
 982         if (ps_flags & B43_PS_AWAKE) {
 983                 awake = 1;
 984         } else if (ps_flags & B43_PS_ASLEEP) {
 985                 awake = 0;
 986         } else {
 987                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
 988                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
 989                 //      successful, set bit26
 990         }
 991
 992 /* FIXME: For now we force awake-on and hwps-off */
 993         hwps = 0;
 994         awake = 1;
 995
 996         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 997         if (hwps)
 998                 macctl |= B43_MACCTL_HWPS;
 999         else
1000                 macctl &= ~B43_MACCTL_HWPS;
1001         if (awake)
1002                 macctl |= B43_MACCTL_AWAKE;
1003         else
1004                 macctl &= ~B43_MACCTL_AWAKE;
1005         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1006         /* Commit write */
1007         b43_read32(dev, B43_MMIO_MACCTL);
1008         if (awake && dev->dev->id.revision >= 5) {
1009                 /* Wait for the microcode to wake up. */
1010                 for (i = 0; i < 100; i++) {
1011                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
1012                                                 B43_SHM_SH_UCODESTAT);
1013                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
1014                                 break;
1015                         udelay(10);
1016                 }
1017         }
1018 }
1019
1020 /* Turn the Analog ON/OFF */
1021 static void b43_switch_analog(struct b43_wldev *dev, int on)
1022 {
1023         switch (dev->phy.type) {
1024         case B43_PHYTYPE_A:
1025         case B43_PHYTYPE_G:
1026                 b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
1027                 break;
1028         case B43_PHYTYPE_N:
1029                 b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
1030                               on ? 0 : 0x7FFF);
1031                 break;
1032         default:
1033                 B43_WARN_ON(1);
1034         }
1035 }
1036
1037 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
1038 {
1039         u32 tmslow;
1040         u32 macctl;
1041
1042         flags |= B43_TMSLOW_PHYCLKEN;
1043         flags |= B43_TMSLOW_PHYRESET;
1044         ssb_device_enable(dev->dev, flags);
1045         msleep(2);              /* Wait for the PLL to turn on. */
1046
1047         /* Now take the PHY out of Reset again */
1048         tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
1049         tmslow |= SSB_TMSLOW_FGC;
1050         tmslow &= ~B43_TMSLOW_PHYRESET;
1051         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1052         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1053         msleep(1);
1054         tmslow &= ~SSB_TMSLOW_FGC;
1055         ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
1056         ssb_read32(dev->dev, SSB_TMSLOW);       /* flush */
1057         msleep(1);
1058
1059         /* Turn Analog ON */
1060         b43_switch_analog(dev, 1);
1061
1062         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1063         macctl &= ~B43_MACCTL_GMODE;
1064         if (flags & B43_TMSLOW_GMODE)
1065                 macctl |= B43_MACCTL_GMODE;
1066         macctl |= B43_MACCTL_IHR_ENABLED;
1067         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1068 }
1069
1070 static void handle_irq_transmit_status(struct b43_wldev *dev)
1071 {
1072         u32 v0, v1;
1073         u16 tmp;
1074         struct b43_txstatus stat;
1075
1076         while (1) {
1077                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1078                 if (!(v0 & 0x00000001))
1079                         break;
1080                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1081
1082                 stat.cookie = (v0 >> 16);
1083                 stat.seq = (v1 & 0x0000FFFF);
1084                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
1085                 tmp = (v0 & 0x0000FFFF);
1086                 stat.frame_count = ((tmp & 0xF000) >> 12);
1087                 stat.rts_count = ((tmp & 0x0F00) >> 8);
1088                 stat.supp_reason = ((tmp & 0x001C) >> 2);
1089                 stat.pm_indicated = !!(tmp & 0x0080);
1090                 stat.intermediate = !!(tmp & 0x0040);
1091                 stat.for_ampdu = !!(tmp & 0x0020);
1092                 stat.acked = !!(tmp & 0x0002);
1093
1094                 b43_handle_txstatus(dev, &stat);
1095         }
1096 }
1097
1098 static void drain_txstatus_queue(struct b43_wldev *dev)
1099 {
1100         u32 dummy;
1101
1102         if (dev->dev->id.revision < 5)
1103                 return;
1104         /* Read all entries from the microcode TXstatus FIFO
1105          * and throw them away.
1106          */
1107         while (1) {
1108                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1109                 if (!(dummy & 0x00000001))
1110                         break;
1111                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1112         }
1113 }
1114
1115 static u32 b43_jssi_read(struct b43_wldev *dev)
1116 {
1117         u32 val = 0;
1118
1119         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
1120         val <<= 16;
1121         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1122
1123         return val;
1124 }
1125
1126 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1127 {
1128         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1129         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1130 }
1131
1132 static void b43_generate_noise_sample(struct b43_wldev *dev)
1133 {
1134         b43_jssi_write(dev, 0x7F7F7F7F);
1135         b43_write32(dev, B43_MMIO_MACCMD,
1136                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1137         B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
1138 }
1139
1140 static void b43_calculate_link_quality(struct b43_wldev *dev)
1141 {
1142         /* Top half of Link Quality calculation. */
1143
1144         if (dev->noisecalc.calculation_running)
1145                 return;
1146         dev->noisecalc.channel_at_start = dev->phy.channel;
1147         dev->noisecalc.calculation_running = 1;
1148         dev->noisecalc.nr_samples = 0;
1149
1150         b43_generate_noise_sample(dev);
1151 }
1152
1153 static void handle_irq_noise(struct b43_wldev *dev)
1154 {
1155         struct b43_phy *phy = &dev->phy;
1156         u16 tmp;
1157         u8 noise[4];
1158         u8 i, j;
1159         s32 average;
1160
1161         /* Bottom half of Link Quality calculation. */
1162
1163         B43_WARN_ON(!dev->noisecalc.calculation_running);
1164         if (dev->noisecalc.channel_at_start != phy->channel)
1165                 goto drop_calculation;
1166         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1167         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1168             noise[2] == 0x7F || noise[3] == 0x7F)
1169                 goto generate_new;
1170
1171         /* Get the noise samples. */
1172         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1173         i = dev->noisecalc.nr_samples;
1174         noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1175         noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1176         noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1177         noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1178         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1179         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1180         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1181         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1182         dev->noisecalc.nr_samples++;
1183         if (dev->noisecalc.nr_samples == 8) {
1184                 /* Calculate the Link Quality by the noise samples. */
1185                 average = 0;
1186                 for (i = 0; i < 8; i++) {
1187                         for (j = 0; j < 4; j++)
1188                                 average += dev->noisecalc.samples[i][j];
1189                 }
1190                 average /= (8 * 4);
1191                 average *= 125;
1192                 average += 64;
1193                 average /= 128;
1194                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1195                 tmp = (tmp / 128) & 0x1F;
1196                 if (tmp >= 8)
1197                         average += 2;
1198                 else
1199                         average -= 25;
1200                 if (tmp == 8)
1201                         average -= 72;
1202                 else
1203                         average -= 48;
1204
1205                 dev->stats.link_noise = average;
1206               drop_calculation:
1207                 dev->noisecalc.calculation_running = 0;
1208                 return;
1209         }
1210       generate_new:
1211         b43_generate_noise_sample(dev);
1212 }
1213
1214 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1215 {
1216         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
1217                 ///TODO: PS TBTT
1218         } else {
1219                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1220                         b43_power_saving_ctl_bits(dev, 0);
1221         }
1222         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
1223                 dev->dfq_valid = 1;
1224 }
1225
1226 static void handle_irq_atim_end(struct b43_wldev *dev)
1227 {
1228         if (dev->dfq_valid) {
1229                 b43_write32(dev, B43_MMIO_MACCMD,
1230                             b43_read32(dev, B43_MMIO_MACCMD)
1231                             | B43_MACCMD_DFQ_VALID);
1232                 dev->dfq_valid = 0;
1233         }
1234 }
1235
1236 static void handle_irq_pmq(struct b43_wldev *dev)
1237 {
1238         u32 tmp;
1239
1240         //TODO: AP mode.
1241
1242         while (1) {
1243                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1244                 if (!(tmp & 0x00000008))
1245                         break;
1246         }
1247         /* 16bit write is odd, but correct. */
1248         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1249 }
1250
1251 static void b43_write_template_common(struct b43_wldev *dev,
1252                                       const u8 * data, u16 size,
1253                                       u16 ram_offset,
1254                                       u16 shm_size_offset, u8 rate)
1255 {
1256         u32 i, tmp;
1257         struct b43_plcp_hdr4 plcp;
1258
1259         plcp.data = 0;
1260         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1261         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1262         ram_offset += sizeof(u32);
1263         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1264          * So leave the first two bytes of the next write blank.
1265          */
1266         tmp = (u32) (data[0]) << 16;
1267         tmp |= (u32) (data[1]) << 24;
1268         b43_ram_write(dev, ram_offset, tmp);
1269         ram_offset += sizeof(u32);
1270         for (i = 2; i < size; i += sizeof(u32)) {
1271                 tmp = (u32) (data[i + 0]);
1272                 if (i + 1 < size)
1273                         tmp |= (u32) (data[i + 1]) << 8;
1274                 if (i + 2 < size)
1275                         tmp |= (u32) (data[i + 2]) << 16;
1276                 if (i + 3 < size)
1277                         tmp |= (u32) (data[i + 3]) << 24;
1278                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1279         }
1280         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1281                         size + sizeof(struct b43_plcp_hdr6));
1282 }
1283
1284 /* Check if the use of the antenna that ieee80211 told us to
1285  * use is possible. This will fall back to DEFAULT.
1286  * "antenna_nr" is the antenna identifier we got from ieee80211. */
1287 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
1288                                   u8 antenna_nr)
1289 {
1290         u8 antenna_mask;
1291
1292         if (antenna_nr == 0) {
1293                 /* Zero means "use default antenna". That's always OK. */
1294                 return 0;
1295         }
1296
1297         /* Get the mask of available antennas. */
1298         if (dev->phy.gmode)
1299                 antenna_mask = dev->dev->bus->sprom.ant_available_bg;
1300         else
1301                 antenna_mask = dev->dev->bus->sprom.ant_available_a;
1302
1303         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
1304                 /* This antenna is not available. Fall back to default. */
1305                 return 0;
1306         }
1307
1308         return antenna_nr;
1309 }
1310
1311 static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
1312 {
1313         antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
1314         switch (antenna) {
1315         case 0:         /* default/diversity */
1316                 return B43_ANTENNA_DEFAULT;
1317         case 1:         /* Antenna 0 */
1318                 return B43_ANTENNA0;
1319         case 2:         /* Antenna 1 */
1320                 return B43_ANTENNA1;
1321         case 3:         /* Antenna 2 */
1322                 return B43_ANTENNA2;
1323         case 4:         /* Antenna 3 */
1324                 return B43_ANTENNA3;
1325         default:
1326                 return B43_ANTENNA_DEFAULT;
1327         }
1328 }
1329
1330 /* Convert a b43 antenna number value to the PHY TX control value. */
1331 static u16 b43_antenna_to_phyctl(int antenna)
1332 {
1333         switch (antenna) {
1334         case B43_ANTENNA0:
1335                 return B43_TXH_PHY_ANT0;
1336         case B43_ANTENNA1:
1337                 return B43_TXH_PHY_ANT1;
1338         case B43_ANTENNA2:
1339                 return B43_TXH_PHY_ANT2;
1340         case B43_ANTENNA3:
1341                 return B43_TXH_PHY_ANT3;
1342         case B43_ANTENNA_AUTO:
1343                 return B43_TXH_PHY_ANT01AUTO;
1344         }
1345         B43_WARN_ON(1);
1346         return 0;
1347 }
1348
1349 static void b43_write_beacon_template(struct b43_wldev *dev,
1350                                       u16 ram_offset,
1351                                       u16 shm_size_offset)
1352 {
1353         unsigned int i, len, variable_len;
1354         const struct ieee80211_mgmt *bcn;
1355         const u8 *ie;
1356         bool tim_found = 0;
1357         unsigned int rate;
1358         u16 ctl;
1359         int antenna;
1360
1361         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1362         len = min((size_t) dev->wl->current_beacon->len,
1363                   0x200 - sizeof(struct b43_plcp_hdr6));
1364         rate = dev->wl->beacon_txctl.tx_rate->hw_value;
1365
1366         b43_write_template_common(dev, (const u8 *)bcn,
1367                                   len, ram_offset, shm_size_offset, rate);
1368
1369         /* Write the PHY TX control parameters. */
1370         antenna = b43_antenna_from_ieee80211(dev,
1371                         dev->wl->beacon_txctl.antenna_sel_tx);
1372         antenna = b43_antenna_to_phyctl(antenna);
1373         ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
1374         /* We can't send beacons with short preamble. Would get PHY errors. */
1375         ctl &= ~B43_TXH_PHY_SHORTPRMBL;
1376         ctl &= ~B43_TXH_PHY_ANT;
1377         ctl &= ~B43_TXH_PHY_ENC;
1378         ctl |= antenna;
1379         if (b43_is_cck_rate(rate))
1380                 ctl |= B43_TXH_PHY_ENC_CCK;
1381         else
1382                 ctl |= B43_TXH_PHY_ENC_OFDM;
1383         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
1384
1385         /* Find the position of the TIM and the DTIM_period value
1386          * and write them to SHM. */
1387         ie = bcn->u.beacon.variable;
1388         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1389         for (i = 0; i < variable_len - 2; ) {
1390                 uint8_t ie_id, ie_len;
1391
1392                 ie_id = ie[i];
1393                 ie_len = ie[i + 1];
1394                 if (ie_id == 5) {
1395                         u16 tim_position;
1396                         u16 dtim_period;
1397                         /* This is the TIM Information Element */
1398
1399                         /* Check whether the ie_len is in the beacon data range. */
1400                         if (variable_len < ie_len + 2 + i)
1401                                 break;
1402                         /* A valid TIM is at least 4 bytes long. */
1403                         if (ie_len < 4)
1404                                 break;
1405                         tim_found = 1;
1406
1407                         tim_position = sizeof(struct b43_plcp_hdr6);
1408                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1409                         tim_position += i;
1410
1411                         dtim_period = ie[i + 3];
1412
1413                         b43_shm_write16(dev, B43_SHM_SHARED,
1414                                         B43_SHM_SH_TIMBPOS, tim_position);
1415                         b43_shm_write16(dev, B43_SHM_SHARED,
1416                                         B43_SHM_SH_DTIMPER, dtim_period);
1417                         break;
1418                 }
1419                 i += ie_len + 2;
1420         }
1421         if (!tim_found) {
1422                 b43warn(dev->wl, "Did not find a valid TIM IE in "
1423                         "the beacon template packet. AP or IBSS operation "
1424                         "may be broken.\n");
1425         } else
1426                 b43dbg(dev->wl, "Updated beacon template\n");
1427 }
1428
1429 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
1430                                       u16 shm_offset, u16 size,
1431                                       struct ieee80211_rate *rate)
1432 {
1433         struct b43_plcp_hdr4 plcp;
1434         u32 tmp;
1435         __le16 dur;
1436
1437         plcp.data = 0;
1438         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
1439         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1440                                                dev->wl->vif, size,
1441                                                rate);
1442         /* Write PLCP in two parts and timing for packet transfer */
1443         tmp = le32_to_cpu(plcp.data);
1444         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
1445         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
1446         b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
1447 }
1448
1449 /* Instead of using custom probe response template, this function
1450  * just patches custom beacon template by:
1451  * 1) Changing packet type
1452  * 2) Patching duration field
1453  * 3) Stripping TIM
1454  */
1455 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
1456                                           u16 *dest_size,
1457                                           struct ieee80211_rate *rate)
1458 {
1459         const u8 *src_data;
1460         u8 *dest_data;
1461         u16 src_size, elem_size, src_pos, dest_pos;
1462         __le16 dur;
1463         struct ieee80211_hdr *hdr;
1464         size_t ie_start;
1465
1466         src_size = dev->wl->current_beacon->len;
1467         src_data = (const u8 *)dev->wl->current_beacon->data;
1468
1469         /* Get the start offset of the variable IEs in the packet. */
1470         ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
1471         B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
1472
1473         if (B43_WARN_ON(src_size < ie_start))
1474                 return NULL;
1475
1476         dest_data = kmalloc(src_size, GFP_ATOMIC);
1477         if (unlikely(!dest_data))
1478                 return NULL;
1479
1480         /* Copy the static data and all Information Elements, except the TIM. */
1481         memcpy(dest_data, src_data, ie_start);
1482         src_pos = ie_start;
1483         dest_pos = ie_start;
1484         for ( ; src_pos < src_size - 2; src_pos += elem_size) {
1485                 elem_size = src_data[src_pos + 1] + 2;
1486                 if (src_data[src_pos] == 5) {
1487                         /* This is the TIM. */
1488                         continue;
1489                 }
1490                 memcpy(dest_data + dest_pos, src_data + src_pos,
1491                        elem_size);
1492                 dest_pos += elem_size;
1493         }
1494         *dest_size = dest_pos;
1495         hdr = (struct ieee80211_hdr *)dest_data;
1496
1497         /* Set the frame control. */
1498         hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1499                                          IEEE80211_STYPE_PROBE_RESP);
1500         dur = ieee80211_generic_frame_duration(dev->wl->hw,
1501                                                dev->wl->vif, *dest_size,
1502                                                rate);
1503         hdr->duration_id = dur;
1504
1505         return dest_data;
1506 }
1507
1508 static void b43_write_probe_resp_template(struct b43_wldev *dev,
1509                                           u16 ram_offset,
1510                                           u16 shm_size_offset,
1511                                           struct ieee80211_rate *rate)
1512 {
1513         const u8 *probe_resp_data;
1514         u16 size;
1515
1516         size = dev->wl->current_beacon->len;
1517         probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
1518         if (unlikely(!probe_resp_data))
1519                 return;
1520
1521         /* Looks like PLCP headers plus packet timings are stored for
1522          * all possible basic rates
1523          */
1524         b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
1525         b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
1526         b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
1527         b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
1528
1529         size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
1530         b43_write_template_common(dev, probe_resp_data,
1531                                   size, ram_offset, shm_size_offset,
1532                                   rate->hw_value);
1533         kfree(probe_resp_data);
1534 }
1535
1536 static void handle_irq_beacon(struct b43_wldev *dev)
1537 {
1538         struct b43_wl *wl = dev->wl;
1539         u32 cmd, beacon0_valid, beacon1_valid;
1540
1541         if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
1542                 return;
1543
1544         /* This is the bottom half of the asynchronous beacon update. */
1545
1546         /* Ignore interrupt in the future. */
1547         dev->irq_savedstate &= ~B43_IRQ_BEACON;
1548
1549         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1550         beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
1551         beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
1552
1553         /* Schedule interrupt manually, if busy. */
1554         if (beacon0_valid && beacon1_valid) {
1555                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
1556                 dev->irq_savedstate |= B43_IRQ_BEACON;
1557                 return;
1558         }
1559
1560         if (!beacon0_valid) {
1561                 if (!wl->beacon0_uploaded) {
1562                         b43_write_beacon_template(dev, 0x68, 0x18);
1563                         b43_write_probe_resp_template(dev, 0x268, 0x4A,
1564                                                       &__b43_ratetable[3]);
1565                         wl->beacon0_uploaded = 1;
1566                 }
1567                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1568                 cmd |= B43_MACCMD_BEACON0_VALID;
1569                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1570         } else if (!beacon1_valid) {
1571                 if (!wl->beacon1_uploaded) {
1572                         b43_write_beacon_template(dev, 0x468, 0x1A);
1573                         wl->beacon1_uploaded = 1;
1574                 }
1575                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1576                 cmd |= B43_MACCMD_BEACON1_VALID;
1577                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1578         }
1579 }
1580
1581 static void b43_beacon_update_trigger_work(struct work_struct *work)
1582 {
1583         struct b43_wl *wl = container_of(work, struct b43_wl,
1584                                          beacon_update_trigger);
1585         struct b43_wldev *dev;
1586
1587         mutex_lock(&wl->mutex);
1588         dev = wl->current_dev;
1589         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
1590                 spin_lock_irq(&wl->irq_lock);
1591                 /* update beacon right away or defer to irq */
1592                 dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1593                 handle_irq_beacon(dev);
1594                 /* The handler might have updated the IRQ mask. */
1595                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
1596                             dev->irq_savedstate);
1597                 mmiowb();
1598                 spin_unlock_irq(&wl->irq_lock);
1599         }
1600         mutex_unlock(&wl->mutex);
1601 }
1602
1603 /* Asynchronously update the packet templates in template RAM.
1604  * Locking: Requires wl->irq_lock to be locked. */
1605 static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon,
1606                                  const struct ieee80211_tx_control *txctl)
1607 {
1608         /* This is the top half of the ansynchronous beacon update.
1609          * The bottom half is the beacon IRQ.
1610          * Beacon update must be asynchronous to avoid sending an
1611          * invalid beacon. This can happen for example, if the firmware
1612          * transmits a beacon while we are updating it. */
1613
1614         if (wl->current_beacon)
1615                 dev_kfree_skb_any(wl->current_beacon);
1616         wl->current_beacon = beacon;
1617         memcpy(&wl->beacon_txctl, txctl, sizeof(wl->beacon_txctl));
1618         wl->beacon0_uploaded = 0;
1619         wl->beacon1_uploaded = 0;
1620         queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
1621 }
1622
1623 static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
1624 {
1625         u32 tmp;
1626         u16 i, len;
1627
1628         len = min((u16) ssid_len, (u16) 0x100);
1629         for (i = 0; i < len; i += sizeof(u32)) {
1630                 tmp = (u32) (ssid[i + 0]);
1631                 if (i + 1 < len)
1632                         tmp |= (u32) (ssid[i + 1]) << 8;
1633                 if (i + 2 < len)
1634                         tmp |= (u32) (ssid[i + 2]) << 16;
1635                 if (i + 3 < len)
1636                         tmp |= (u32) (ssid[i + 3]) << 24;
1637                 b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp);
1638         }
1639         b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len);
1640 }
1641
1642 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1643 {
1644         b43_time_lock(dev);
1645         if (dev->dev->id.revision >= 3) {
1646                 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
1647                 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
1648         } else {
1649                 b43_write16(dev, 0x606, (beacon_int >> 6));
1650                 b43_write16(dev, 0x610, beacon_int);
1651         }
1652         b43_time_unlock(dev);
1653         b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
1654 }
1655
1656 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1657 {
1658         //TODO
1659 }
1660
1661 /* Interrupt handler bottom-half */
1662 static void b43_interrupt_tasklet(struct b43_wldev *dev)
1663 {
1664         u32 reason;
1665         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1666         u32 merged_dma_reason = 0;
1667         int i;
1668         unsigned long flags;
1669
1670         spin_lock_irqsave(&dev->wl->irq_lock, flags);
1671
1672         B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
1673
1674         reason = dev->irq_reason;
1675         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1676                 dma_reason[i] = dev->dma_reason[i];
1677                 merged_dma_reason |= dma_reason[i];
1678         }
1679
1680         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1681                 b43err(dev->wl, "MAC transmission error\n");
1682
1683         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1684                 b43err(dev->wl, "PHY transmission error\n");
1685                 rmb();
1686                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1687                         atomic_set(&dev->phy.txerr_cnt,
1688                                    B43_PHY_TX_BADNESS_LIMIT);
1689                         b43err(dev->wl, "Too many PHY TX errors, "
1690                                         "restarting the controller\n");
1691                         b43_controller_restart(dev, "PHY TX errors");
1692                 }
1693         }
1694
1695         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1696                                           B43_DMAIRQ_NONFATALMASK))) {
1697                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1698                         b43err(dev->wl, "Fatal DMA error: "
1699                                "0x%08X, 0x%08X, 0x%08X, "
1700                                "0x%08X, 0x%08X, 0x%08X\n",
1701                                dma_reason[0], dma_reason[1],
1702                                dma_reason[2], dma_reason[3],
1703                                dma_reason[4], dma_reason[5]);
1704                         b43_controller_restart(dev, "DMA error");
1705                         mmiowb();
1706                         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1707                         return;
1708                 }
1709                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1710                         b43err(dev->wl, "DMA error: "
1711                                "0x%08X, 0x%08X, 0x%08X, "
1712                                "0x%08X, 0x%08X, 0x%08X\n",
1713                                dma_reason[0], dma_reason[1],
1714                                dma_reason[2], dma_reason[3],
1715                                dma_reason[4], dma_reason[5]);
1716                 }
1717         }
1718
1719         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1720                 handle_irq_ucode_debug(dev);
1721         if (reason & B43_IRQ_TBTT_INDI)
1722                 handle_irq_tbtt_indication(dev);
1723         if (reason & B43_IRQ_ATIM_END)
1724                 handle_irq_atim_end(dev);
1725         if (reason & B43_IRQ_BEACON)
1726                 handle_irq_beacon(dev);
1727         if (reason & B43_IRQ_PMQ)
1728                 handle_irq_pmq(dev);
1729         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1730                 ;/* TODO */
1731         if (reason & B43_IRQ_NOISESAMPLE_OK)
1732                 handle_irq_noise(dev);
1733
1734         /* Check the DMA reason registers for received data. */
1735         if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
1736                 if (b43_using_pio_transfers(dev))
1737                         b43_pio_rx(dev->pio.rx_queue);
1738                 else
1739                         b43_dma_rx(dev->dma.rx_ring);
1740         }
1741         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1742         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1743         B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
1744         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1745         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1746
1747         if (reason & B43_IRQ_TX_OK)
1748                 handle_irq_transmit_status(dev);
1749
1750         b43_interrupt_enable(dev, dev->irq_savedstate);
1751         mmiowb();
1752         spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
1753 }
1754
1755 static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
1756 {
1757         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
1758
1759         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
1760         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
1761         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
1762         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
1763         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
1764         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
1765 }
1766
1767 /* Interrupt handler top-half */
1768 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
1769 {
1770         irqreturn_t ret = IRQ_NONE;
1771         struct b43_wldev *dev = dev_id;
1772         u32 reason;
1773
1774         if (!dev)
1775                 return IRQ_NONE;
1776
1777         spin_lock(&dev->wl->irq_lock);
1778
1779         if (b43_status(dev) < B43_STAT_STARTED)
1780                 goto out;
1781         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1782         if (reason == 0xffffffff)       /* shared IRQ */
1783                 goto out;
1784         ret = IRQ_HANDLED;
1785         reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
1786         if (!reason)
1787                 goto out;
1788
1789         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1790             & 0x0001DC00;
1791         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1792             & 0x0000DC00;
1793         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
1794             & 0x0000DC00;
1795         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
1796             & 0x0001DC00;
1797         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
1798             & 0x0000DC00;
1799         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
1800             & 0x0000DC00;
1801
1802         b43_interrupt_ack(dev, reason);
1803         /* disable all IRQs. They are enabled again in the bottom half. */
1804         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
1805         /* save the reason code and call our bottom half. */
1806         dev->irq_reason = reason;
1807         tasklet_schedule(&dev->isr_tasklet);
1808       out:
1809         mmiowb();
1810         spin_unlock(&dev->wl->irq_lock);
1811
1812         return ret;
1813 }
1814
1815 static void do_release_fw(struct b43_firmware_file *fw)
1816 {
1817         release_firmware(fw->data);
1818         fw->data = NULL;
1819         fw->filename = NULL;
1820 }
1821
1822 static void b43_release_firmware(struct b43_wldev *dev)
1823 {
1824         do_release_fw(&dev->fw.ucode);
1825         do_release_fw(&dev->fw.pcm);
1826         do_release_fw(&dev->fw.initvals);
1827         do_release_fw(&dev->fw.initvals_band);
1828 }
1829
1830 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
1831 {
1832         const char *text;
1833
1834         text = "You must go to "
1835                "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware "
1836                "and download the latest firmware (version 4).\n";
1837         if (error)
1838                 b43err(wl, text);
1839         else
1840                 b43warn(wl, text);
1841 }
1842
1843 static int do_request_fw(struct b43_wldev *dev,
1844                          const char *name,
1845                          struct b43_firmware_file *fw)
1846 {
1847         char path[sizeof(modparam_fwpostfix) + 32];
1848         const struct firmware *blob;
1849         struct b43_fw_header *hdr;
1850         u32 size;
1851         int err;
1852
1853         if (!name) {
1854                 /* Don't fetch anything. Free possibly cached firmware. */
1855                 do_release_fw(fw);
1856                 return 0;
1857         }
1858         if (fw->filename) {
1859                 if (strcmp(fw->filename, name) == 0)
1860                         return 0; /* Already have this fw. */
1861                 /* Free the cached firmware first. */
1862                 do_release_fw(fw);
1863         }
1864
1865         snprintf(path, ARRAY_SIZE(path),
1866                  "b43%s/%s.fw",
1867                  modparam_fwpostfix, name);
1868         err = request_firmware(&blob, path, dev->dev->dev);
1869         if (err) {
1870                 b43err(dev->wl, "Firmware file \"%s\" not found "
1871                        "or load failed.\n", path);
1872                 return err;
1873         }
1874         if (blob->size < sizeof(struct b43_fw_header))
1875                 goto err_format;
1876         hdr = (struct b43_fw_header *)(blob->data);
1877         switch (hdr->type) {
1878         case B43_FW_TYPE_UCODE:
1879         case B43_FW_TYPE_PCM:
1880                 size = be32_to_cpu(hdr->size);
1881                 if (size != blob->size - sizeof(struct b43_fw_header))
1882                         goto err_format;
1883                 /* fallthrough */
1884         case B43_FW_TYPE_IV:
1885                 if (hdr->ver != 1)
1886                         goto err_format;
1887                 break;
1888         default:
1889                 goto err_format;
1890         }
1891
1892         fw->data = blob;
1893         fw->filename = name;
1894
1895         return 0;
1896
1897 err_format:
1898         b43err(dev->wl, "Firmware file \"%s\" format error.\n", path);
1899         release_firmware(blob);
1900
1901         return -EPROTO;
1902 }
1903
1904 static int b43_request_firmware(struct b43_wldev *dev)
1905 {
1906         struct b43_firmware *fw = &dev->fw;
1907         const u8 rev = dev->dev->id.revision;
1908         const char *filename;
1909         u32 tmshigh;
1910         int err;
1911
1912         /* Get microcode */
1913         tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
1914         if ((rev >= 5) && (rev <= 10))
1915                 filename = "ucode5";
1916         else if ((rev >= 11) && (rev <= 12))
1917                 filename = "ucode11";
1918         else if (rev >= 13)
1919                 filename = "ucode13";
1920         else
1921                 goto err_no_ucode;
1922         err = do_request_fw(dev, filename, &fw->ucode);
1923         if (err)
1924                 goto err_load;
1925
1926         /* Get PCM code */
1927         if ((rev >= 5) && (rev <= 10))
1928                 filename = "pcm5";
1929         else if (rev >= 11)
1930                 filename = NULL;
1931         else
1932                 goto err_no_pcm;
1933         err = do_request_fw(dev, filename, &fw->pcm);
1934         if (err)
1935                 goto err_load;
1936
1937         /* Get initvals */
1938         switch (dev->phy.type) {
1939         case B43_PHYTYPE_A:
1940                 if ((rev >= 5) && (rev <= 10)) {
1941                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1942                                 filename = "a0g1initvals5";
1943                         else
1944                                 filename = "a0g0initvals5";
1945                 } else
1946                         goto err_no_initvals;
1947                 break;
1948         case B43_PHYTYPE_G:
1949                 if ((rev >= 5) && (rev <= 10))
1950                         filename = "b0g0initvals5";
1951                 else if (rev >= 13)
1952                         filename = "lp0initvals13";
1953                 else
1954                         goto err_no_initvals;
1955                 break;
1956         case B43_PHYTYPE_N:
1957                 if ((rev >= 11) && (rev <= 12))
1958                         filename = "n0initvals11";
1959                 else
1960                         goto err_no_initvals;
1961                 break;
1962         default:
1963                 goto err_no_initvals;
1964         }
1965         err = do_request_fw(dev, filename, &fw->initvals);
1966         if (err)
1967                 goto err_load;
1968
1969         /* Get bandswitch initvals */
1970         switch (dev->phy.type) {
1971         case B43_PHYTYPE_A:
1972                 if ((rev >= 5) && (rev <= 10)) {
1973                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
1974                                 filename = "a0g1bsinitvals5";
1975                         else
1976                                 filename = "a0g0bsinitvals5";
1977                 } else if (rev >= 11)
1978                         filename = NULL;
1979                 else
1980                         goto err_no_initvals;
1981                 break;
1982         case B43_PHYTYPE_G:
1983                 if ((rev >= 5) && (rev <= 10))
1984                         filename = "b0g0bsinitvals5";
1985                 else if (rev >= 11)
1986                         filename = NULL;
1987                 else
1988                         goto err_no_initvals;
1989                 break;
1990         case B43_PHYTYPE_N:
1991                 if ((rev >= 11) && (rev <= 12))
1992                         filename = "n0bsinitvals11";
1993                 else
1994                         goto err_no_initvals;
1995                 break;
1996         default:
1997                 goto err_no_initvals;
1998         }
1999         err = do_request_fw(dev, filename, &fw->initvals_band);
2000         if (err)
2001                 goto err_load;
2002
2003         return 0;
2004
2005 err_load:
2006         b43_print_fw_helptext(dev->wl, 1);
2007         goto error;
2008
2009 err_no_ucode:
2010         err = -ENODEV;
2011         b43err(dev->wl, "No microcode available for core rev %u\n", rev);
2012         goto error;
2013
2014 err_no_pcm:
2015         err = -ENODEV;
2016         b43err(dev->wl, "No PCM available for core rev %u\n", rev);
2017         goto error;
2018
2019 err_no_initvals:
2020         err = -ENODEV;
2021         b43err(dev->wl, "No Initial Values firmware file for PHY %u, "
2022                "core rev %u\n", dev->phy.type, rev);
2023         goto error;
2024
2025 error:
2026         b43_release_firmware(dev);
2027         return err;
2028 }
2029
2030 static int b43_upload_microcode(struct b43_wldev *dev)
2031 {
2032         const size_t hdr_len = sizeof(struct b43_fw_header);
2033         const __be32 *data;
2034         unsigned int i, len;
2035         u16 fwrev, fwpatch, fwdate, fwtime;
2036         u32 tmp, macctl;
2037         int err = 0;
2038
2039         /* Jump the microcode PSM to offset 0 */
2040         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2041         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
2042         macctl |= B43_MACCTL_PSM_JMP0;
2043         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2044         /* Zero out all microcode PSM registers and shared memory. */
2045         for (i = 0; i < 64; i++)
2046                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
2047         for (i = 0; i < 4096; i += 2)
2048                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
2049
2050         /* Upload Microcode. */
2051         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
2052         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
2053         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
2054         for (i = 0; i < len; i++) {
2055                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2056                 udelay(10);
2057         }
2058
2059         if (dev->fw.pcm.data) {
2060                 /* Upload PCM data. */
2061                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
2062                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
2063                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
2064                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
2065                 /* No need for autoinc bit in SHM_HW */
2066                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
2067                 for (i = 0; i < len; i++) {
2068                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2069                         udelay(10);
2070                 }
2071         }
2072
2073         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
2074
2075         /* Start the microcode PSM */
2076         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2077         macctl &= ~B43_MACCTL_PSM_JMP0;
2078         macctl |= B43_MACCTL_PSM_RUN;
2079         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2080
2081         /* Wait for the microcode to load and respond */
2082         i = 0;
2083         while (1) {
2084                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2085                 if (tmp == B43_IRQ_MAC_SUSPENDED)
2086                         break;
2087                 i++;
2088                 if (i >= 20) {
2089                         b43err(dev->wl, "Microcode not responding\n");
2090                         b43_print_fw_helptext(dev->wl, 1);
2091                         err = -ENODEV;
2092                         goto error;
2093                 }
2094                 msleep_interruptible(50);
2095                 if (signal_pending(current)) {
2096                         err = -EINTR;
2097                         goto error;
2098                 }
2099         }
2100         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
2101
2102         /* Get and check the revisions. */
2103         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
2104         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
2105         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
2106         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
2107
2108         if (fwrev <= 0x128) {
2109                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
2110                        "binary drivers older than version 4.x is unsupported. "
2111                        "You must upgrade your firmware files.\n");
2112                 b43_print_fw_helptext(dev->wl, 1);
2113                 err = -EOPNOTSUPP;
2114                 goto error;
2115         }
2116         b43info(dev->wl, "Loading firmware version %u.%u "
2117                 "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
2118                 fwrev, fwpatch,
2119                 (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
2120                 (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
2121
2122         dev->fw.rev = fwrev;
2123         dev->fw.patch = fwpatch;
2124
2125         if (b43_is_old_txhdr_format(dev)) {
2126                 b43warn(dev->wl, "You are using an old firmware image. "
2127                         "Support for old firmware will be removed in July 2008.\n");
2128                 b43_print_fw_helptext(dev->wl, 0);
2129         }
2130
2131         return 0;
2132
2133 error:
2134         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2135         macctl &= ~B43_MACCTL_PSM_RUN;
2136         macctl |= B43_MACCTL_PSM_JMP0;
2137         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2138
2139         return err;
2140 }
2141
2142 static int b43_write_initvals(struct b43_wldev *dev,
2143                               const struct b43_iv *ivals,
2144                               size_t count,
2145                               size_t array_size)
2146 {
2147         const struct b43_iv *iv;
2148         u16 offset;
2149         size_t i;
2150         bool bit32;
2151
2152         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
2153         iv = ivals;
2154         for (i = 0; i < count; i++) {
2155                 if (array_size < sizeof(iv->offset_size))
2156                         goto err_format;
2157                 array_size -= sizeof(iv->offset_size);
2158                 offset = be16_to_cpu(iv->offset_size);
2159                 bit32 = !!(offset & B43_IV_32BIT);
2160                 offset &= B43_IV_OFFSET_MASK;
2161                 if (offset >= 0x1000)
2162                         goto err_format;
2163                 if (bit32) {
2164                         u32 value;
2165
2166                         if (array_size < sizeof(iv->data.d32))
2167                                 goto err_format;
2168                         array_size -= sizeof(iv->data.d32);
2169
2170                         value = be32_to_cpu(get_unaligned(&iv->data.d32));
2171                         b43_write32(dev, offset, value);
2172
2173                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2174                                                         sizeof(__be16) +
2175                                                         sizeof(__be32));
2176                 } else {
2177                         u16 value;
2178
2179                         if (array_size < sizeof(iv->data.d16))
2180                                 goto err_format;
2181                         array_size -= sizeof(iv->data.d16);
2182
2183                         value = be16_to_cpu(iv->data.d16);
2184                         b43_write16(dev, offset, value);
2185
2186                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2187                                                         sizeof(__be16) +
2188                                                         sizeof(__be16));
2189                 }
2190         }
2191         if (array_size)
2192                 goto err_format;
2193
2194         return 0;
2195
2196 err_format:
2197         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
2198         b43_print_fw_helptext(dev->wl, 1);
2199
2200         return -EPROTO;
2201 }
2202
2203 static int b43_upload_initvals(struct b43_wldev *dev)
2204 {
2205         const size_t hdr_len = sizeof(struct b43_fw_header);
2206         const struct b43_fw_header *hdr;
2207         struct b43_firmware *fw = &dev->fw;
2208         const struct b43_iv *ivals;
2209         size_t count;
2210         int err;
2211
2212         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
2213         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
2214         count = be32_to_cpu(hdr->size);
2215         err = b43_write_initvals(dev, ivals, count,
2216                                  fw->initvals.data->size - hdr_len);
2217         if (err)
2218                 goto out;
2219         if (fw->initvals_band.data) {
2220                 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
2221                 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
2222                 count = be32_to_cpu(hdr->size);
2223                 err = b43_write_initvals(dev, ivals, count,
2224                                          fw->initvals_band.data->size - hdr_len);
2225                 if (err)
2226                         goto out;
2227         }
2228 out:
2229
2230         return err;
2231 }
2232
2233 /* Initialize the GPIOs
2234  * http://bcm-specs.sipsolutions.net/GPIO
2235  */
2236 static int b43_gpio_init(struct b43_wldev *dev)
2237 {
2238         struct ssb_bus *bus = dev->dev->bus;
2239         struct ssb_device *gpiodev, *pcidev = NULL;
2240         u32 mask, set;
2241
2242         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2243                     & ~B43_MACCTL_GPOUTSMSK);
2244
2245         b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK)
2246                     | 0x000F);
2247
2248         mask = 0x0000001F;
2249         set = 0x0000000F;
2250         if (dev->dev->bus->chip_id == 0x4301) {
2251                 mask |= 0x0060;
2252                 set |= 0x0060;
2253         }
2254         if (0 /* FIXME: conditional unknown */ ) {
2255                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2256                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2257                             | 0x0100);
2258                 mask |= 0x0180;
2259                 set |= 0x0180;
2260         }
2261         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
2262                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2263                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2264                             | 0x0200);
2265                 mask |= 0x0200;
2266                 set |= 0x0200;
2267         }
2268         if (dev->dev->id.revision >= 2)
2269                 mask |= 0x0010; /* FIXME: This is redundant. */
2270
2271 #ifdef CONFIG_SSB_DRIVER_PCICORE
2272         pcidev = bus->pcicore.dev;
2273 #endif
2274         gpiodev = bus->chipco.dev ? : pcidev;
2275         if (!gpiodev)
2276                 return 0;
2277         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2278                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2279                      & mask) | set);
2280
2281         return 0;
2282 }
2283
2284 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2285 static void b43_gpio_cleanup(struct b43_wldev *dev)
2286 {
2287         struct ssb_bus *bus = dev->dev->bus;
2288         struct ssb_device *gpiodev, *pcidev = NULL;
2289
2290 #ifdef CONFIG_SSB_DRIVER_PCICORE
2291         pcidev = bus->pcicore.dev;
2292 #endif
2293         gpiodev = bus->chipco.dev ? : pcidev;
2294         if (!gpiodev)
2295                 return;
2296         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2297 }
2298
2299 /* http://bcm-specs.sipsolutions.net/EnableMac */
2300 static void b43_mac_enable(struct b43_wldev *dev)
2301 {
2302         dev->mac_suspended--;
2303         B43_WARN_ON(dev->mac_suspended < 0);
2304         if (dev->mac_suspended == 0) {
2305                 b43_write32(dev, B43_MMIO_MACCTL,
2306                             b43_read32(dev, B43_MMIO_MACCTL)
2307                             | B43_MACCTL_ENABLED);
2308                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2309                             B43_IRQ_MAC_SUSPENDED);
2310                 /* Commit writes */
2311                 b43_read32(dev, B43_MMIO_MACCTL);
2312                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2313                 b43_power_saving_ctl_bits(dev, 0);
2314
2315                 /* Re-enable IRQs. */
2316                 spin_lock_irq(&dev->wl->irq_lock);
2317                 b43_interrupt_enable(dev, dev->irq_savedstate);
2318                 spin_unlock_irq(&dev->wl->irq_lock);
2319         }
2320 }
2321
2322 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2323 static void b43_mac_suspend(struct b43_wldev *dev)
2324 {
2325         int i;
2326         u32 tmp;
2327
2328         might_sleep();
2329         B43_WARN_ON(dev->mac_suspended < 0);
2330
2331         if (dev->mac_suspended == 0) {
2332                 /* Mask IRQs before suspending MAC. Otherwise
2333                  * the MAC stays busy and won't suspend. */
2334                 spin_lock_irq(&dev->wl->irq_lock);
2335                 tmp = b43_interrupt_disable(dev, B43_IRQ_ALL);
2336                 spin_unlock_irq(&dev->wl->irq_lock);
2337                 b43_synchronize_irq(dev);
2338                 dev->irq_savedstate = tmp;
2339
2340                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2341                 b43_write32(dev, B43_MMIO_MACCTL,
2342                             b43_read32(dev, B43_MMIO_MACCTL)
2343                             & ~B43_MACCTL_ENABLED);
2344                 /* force pci to flush the write */
2345                 b43_read32(dev, B43_MMIO_MACCTL);
2346                 for (i = 35; i; i--) {
2347                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2348                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2349                                 goto out;
2350                         udelay(10);
2351                 }
2352                 /* Hm, it seems this will take some time. Use msleep(). */
2353                 for (i = 40; i; i--) {
2354                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2355                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2356                                 goto out;
2357                         msleep(1);
2358                 }
2359                 b43err(dev->wl, "MAC suspend failed\n");
2360         }
2361 out:
2362         dev->mac_suspended++;
2363 }
2364
2365 static void b43_adjust_opmode(struct b43_wldev *dev)
2366 {
2367         struct b43_wl *wl = dev->wl;
2368         u32 ctl;
2369         u16 cfp_pretbtt;
2370
2371         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2372         /* Reset status to STA infrastructure mode. */
2373         ctl &= ~B43_MACCTL_AP;
2374         ctl &= ~B43_MACCTL_KEEP_CTL;
2375         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2376         ctl &= ~B43_MACCTL_KEEP_BAD;
2377         ctl &= ~B43_MACCTL_PROMISC;
2378         ctl &= ~B43_MACCTL_BEACPROMISC;
2379         ctl |= B43_MACCTL_INFRA;
2380
2381         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
2382                 ctl |= B43_MACCTL_AP;
2383         else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
2384                 ctl &= ~B43_MACCTL_INFRA;
2385
2386         if (wl->filter_flags & FIF_CONTROL)
2387                 ctl |= B43_MACCTL_KEEP_CTL;
2388         if (wl->filter_flags & FIF_FCSFAIL)
2389                 ctl |= B43_MACCTL_KEEP_BAD;
2390         if (wl->filter_flags & FIF_PLCPFAIL)
2391                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2392         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2393                 ctl |= B43_MACCTL_PROMISC;
2394         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2395                 ctl |= B43_MACCTL_BEACPROMISC;
2396
2397         /* Workaround: On old hardware the HW-MAC-address-filter
2398          * doesn't work properly, so always run promisc in filter
2399          * it in software. */
2400         if (dev->dev->id.revision <= 4)
2401                 ctl |= B43_MACCTL_PROMISC;
2402
2403         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2404
2405         cfp_pretbtt = 2;
2406         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2407                 if (dev->dev->bus->chip_id == 0x4306 &&
2408                     dev->dev->bus->chip_rev == 3)
2409                         cfp_pretbtt = 100;
2410                 else
2411                         cfp_pretbtt = 50;
2412         }
2413         b43_write16(dev, 0x612, cfp_pretbtt);
2414 }
2415
2416 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2417 {
2418         u16 offset;
2419
2420         if (is_ofdm) {
2421                 offset = 0x480;
2422                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2423         } else {
2424                 offset = 0x4C0;
2425                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2426         }
2427         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2428                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2429 }
2430
2431 static void b43_rate_memory_init(struct b43_wldev *dev)
2432 {
2433         switch (dev->phy.type) {
2434         case B43_PHYTYPE_A:
2435         case B43_PHYTYPE_G:
2436         case B43_PHYTYPE_N:
2437                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2438                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2439                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2440                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2441                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2442                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2443                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2444                 if (dev->phy.type == B43_PHYTYPE_A)
2445                         break;
2446                 /* fallthrough */
2447         case B43_PHYTYPE_B:
2448                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2449                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2450                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2451                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2452                 break;
2453         default:
2454                 B43_WARN_ON(1);
2455         }
2456 }
2457
2458 /* Set the default values for the PHY TX Control Words. */
2459 static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
2460 {
2461         u16 ctl = 0;
2462
2463         ctl |= B43_TXH_PHY_ENC_CCK;
2464         ctl |= B43_TXH_PHY_ANT01AUTO;
2465         ctl |= B43_TXH_PHY_TXPWR;
2466
2467         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
2468         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
2469         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
2470 }
2471
2472 /* Set the TX-Antenna for management frames sent by firmware. */
2473 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
2474 {
2475         u16 ant;
2476         u16 tmp;
2477
2478         ant = b43_antenna_to_phyctl(antenna);
2479
2480         /* For ACK/CTS */
2481         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
2482         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2483         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
2484         /* For Probe Resposes */
2485         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
2486         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
2487         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
2488 }
2489
2490 /* This is the opposite of b43_chip_init() */
2491 static void b43_chip_exit(struct b43_wldev *dev)
2492 {
2493         b43_radio_turn_off(dev, 1);
2494         b43_gpio_cleanup(dev);
2495         /* firmware is released later */
2496 }
2497
2498 /* Initialize the chip
2499  * http://bcm-specs.sipsolutions.net/ChipInit
2500  */
2501 static int b43_chip_init(struct b43_wldev *dev)
2502 {
2503         struct b43_phy *phy = &dev->phy;
2504         int err, tmp;
2505         u32 value32, macctl;
2506         u16 value16;
2507
2508         /* Initialize the MAC control */
2509         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
2510         if (dev->phy.gmode)
2511                 macctl |= B43_MACCTL_GMODE;
2512         macctl |= B43_MACCTL_INFRA;
2513         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2514
2515         err = b43_request_firmware(dev);
2516         if (err)
2517                 goto out;
2518         err = b43_upload_microcode(dev);
2519         if (err)
2520                 goto out;       /* firmware is released later */
2521
2522         err = b43_gpio_init(dev);
2523         if (err)
2524                 goto out;       /* firmware is released later */
2525
2526         err = b43_upload_initvals(dev);
2527         if (err)
2528                 goto err_gpio_clean;
2529         b43_radio_turn_on(dev);
2530
2531         b43_write16(dev, 0x03E6, 0x0000);
2532         err = b43_phy_init(dev);
2533         if (err)
2534                 goto err_radio_off;
2535
2536         /* Select initial Interference Mitigation. */
2537         tmp = phy->interfmode;
2538         phy->interfmode = B43_INTERFMODE_NONE;
2539         b43_radio_set_interference_mitigation(dev, tmp);
2540
2541         b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
2542         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
2543
2544         if (phy->type == B43_PHYTYPE_B) {
2545                 value16 = b43_read16(dev, 0x005E);
2546                 value16 |= 0x0004;
2547                 b43_write16(dev, 0x005E, value16);
2548         }
2549         b43_write32(dev, 0x0100, 0x01000000);
2550         if (dev->dev->id.revision < 5)
2551                 b43_write32(dev, 0x010C, 0x01000000);
2552
2553         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2554                     & ~B43_MACCTL_INFRA);
2555         b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
2556                     | B43_MACCTL_INFRA);
2557
2558         /* Probe Response Timeout value */
2559         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
2560         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
2561
2562         /* Initially set the wireless operation mode. */
2563         b43_adjust_opmode(dev);
2564
2565         if (dev->dev->id.revision < 3) {
2566                 b43_write16(dev, 0x060E, 0x0000);
2567                 b43_write16(dev, 0x0610, 0x8000);
2568                 b43_write16(dev, 0x0604, 0x0000);
2569                 b43_write16(dev, 0x0606, 0x0200);
2570         } else {
2571                 b43_write32(dev, 0x0188, 0x80000000);
2572                 b43_write32(dev, 0x018C, 0x02000000);
2573         }
2574         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
2575         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
2576         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
2577         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
2578         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
2579         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
2580         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
2581
2582         value32 = ssb_read32(dev->dev, SSB_TMSLOW);
2583         value32 |= 0x00100000;
2584         ssb_write32(dev->dev, SSB_TMSLOW, value32);
2585
2586         b43_write16(dev, B43_MMIO_POWERUP_DELAY,
2587                     dev->dev->bus->chipco.fast_pwrup_delay);
2588
2589         err = 0;
2590         b43dbg(dev->wl, "Chip initialized\n");
2591 out:
2592         return err;
2593
2594 err_radio_off:
2595         b43_radio_turn_off(dev, 1);
2596 err_gpio_clean:
2597         b43_gpio_cleanup(dev);
2598         return err;
2599 }
2600
2601 static void b43_periodic_every120sec(struct b43_wldev *dev)
2602 {
2603         struct b43_phy *phy = &dev->phy;
2604
2605         if (phy->type != B43_PHYTYPE_G || phy->rev < 2)
2606                 return;
2607
2608         b43_mac_suspend(dev);
2609         b43_lo_g_measure(dev);
2610         b43_mac_enable(dev);
2611         if (b43_has_hardware_pctl(phy))
2612                 b43_lo_g_ctl_mark_all_unused(dev);
2613 }
2614
2615 static void b43_periodic_every60sec(struct b43_wldev *dev)
2616 {
2617         struct b43_phy *phy = &dev->phy;
2618
2619         if (phy->type != B43_PHYTYPE_G)
2620                 return;
2621         if (!b43_has_hardware_pctl(phy))
2622                 b43_lo_g_ctl_mark_all_unused(dev);
2623         if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
2624                 b43_mac_suspend(dev);
2625                 b43_calc_nrssi_slope(dev);
2626                 if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
2627                         u8 old_chan = phy->channel;
2628
2629                         /* VCO Calibration */
2630                         if (old_chan >= 8)
2631                                 b43_radio_selectchannel(dev, 1, 0);
2632                         else
2633                                 b43_radio_selectchannel(dev, 13, 0);
2634                         b43_radio_selectchannel(dev, old_chan, 0);
2635                 }
2636                 b43_mac_enable(dev);
2637         }
2638 }
2639
2640 static void b43_periodic_every30sec(struct b43_wldev *dev)
2641 {
2642         /* Update device statistics. */
2643         b43_calculate_link_quality(dev);
2644 }
2645
2646 static void b43_periodic_every15sec(struct b43_wldev *dev)
2647 {
2648         struct b43_phy *phy = &dev->phy;
2649
2650         if (phy->type == B43_PHYTYPE_G) {
2651                 //TODO: update_aci_moving_average
2652                 if (phy->aci_enable && phy->aci_wlan_automatic) {
2653                         b43_mac_suspend(dev);
2654                         if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
2655                                 if (0 /*TODO: bunch of conditions */ ) {
2656                                         b43_radio_set_interference_mitigation
2657                                             (dev, B43_INTERFMODE_MANUALWLAN);
2658                                 }
2659                         } else if (1 /*TODO*/) {
2660                                 /*
2661                                    if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
2662                                    b43_radio_set_interference_mitigation(dev,
2663                                    B43_INTERFMODE_NONE);
2664                                    }
2665                                  */
2666                         }
2667                         b43_mac_enable(dev);
2668                 } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
2669                            phy->rev == 1) {
2670                         //TODO: implement rev1 workaround
2671                 }
2672         }
2673         b43_phy_xmitpower(dev); //FIXME: unless scanning?
2674         //TODO for APHY (temperature?)
2675
2676         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
2677         wmb();
2678 }
2679
2680 static void do_periodic_work(struct b43_wldev *dev)
2681 {
2682         unsigned int state;
2683
2684         state = dev->periodic_state;
2685         if (state % 8 == 0)
2686                 b43_periodic_every120sec(dev);
2687         if (state % 4 == 0)
2688                 b43_periodic_every60sec(dev);
2689         if (state % 2 == 0)
2690                 b43_periodic_every30sec(dev);
2691         b43_periodic_every15sec(dev);
2692 }
2693
2694 /* Periodic work locking policy:
2695  *      The whole periodic work handler is protected by
2696  *      wl->mutex. If another lock is needed somewhere in the
2697  *      pwork callchain, it's aquired in-place, where it's needed.
2698  */
2699 static void b43_periodic_work_handler(struct work_struct *work)
2700 {
2701         struct b43_wldev *dev = container_of(work, struct b43_wldev,
2702                                              periodic_work.work);
2703         struct b43_wl *wl = dev->wl;
2704         unsigned long delay;
2705
2706         mutex_lock(&wl->mutex);
2707
2708         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
2709                 goto out;
2710         if (b43_debug(dev, B43_DBG_PWORK_STOP))
2711                 goto out_requeue;
2712
2713         do_periodic_work(dev);
2714
2715         dev->periodic_state++;
2716 out_requeue:
2717         if (b43_debug(dev, B43_DBG_PWORK_FAST))
2718                 delay = msecs_to_jiffies(50);
2719         else
2720                 delay = round_jiffies_relative(HZ * 15);
2721         queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
2722 out:
2723         mutex_unlock(&wl->mutex);
2724 }
2725
2726 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
2727 {
2728         struct delayed_work *work = &dev->periodic_work;
2729
2730         dev->periodic_state = 0;
2731         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
2732         queue_delayed_work(dev->wl->hw->workqueue, work, 0);
2733 }
2734
2735 /* Check if communication with the device works correctly. */
2736 static int b43_validate_chipaccess(struct b43_wldev *dev)
2737 {
2738         u32 v, backup;
2739
2740         backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
2741
2742         /* Check for read/write and endianness problems. */
2743         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
2744         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
2745                 goto error;
2746         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
2747         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
2748                 goto error;
2749
2750         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
2751
2752         if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
2753                 /* The 32bit register shadows the two 16bit registers
2754                  * with update sideeffects. Validate this. */
2755                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
2756                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
2757                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
2758                         goto error;
2759                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
2760                         goto error;
2761         }
2762         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
2763
2764         v = b43_read32(dev, B43_MMIO_MACCTL);
2765         v |= B43_MACCTL_GMODE;
2766         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
2767                 goto error;
2768
2769         return 0;
2770 error:
2771         b43err(dev->wl, "Failed to validate the chipaccess\n");
2772         return -ENODEV;
2773 }
2774
2775 static void b43_security_init(struct b43_wldev *dev)
2776 {
2777         dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
2778         B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
2779         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
2780         /* KTP is a word address, but we address SHM bytewise.
2781          * So multiply by two.
2782          */
2783         dev->ktp *= 2;
2784         if (dev->dev->id.revision >= 5) {
2785                 /* Number of RCMTA address slots */
2786                 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
2787         }
2788         b43_clear_keys(dev);
2789 }
2790
2791 static int b43_rng_read(struct hwrng *rng, u32 * data)
2792 {
2793         struct b43_wl *wl = (struct b43_wl *)rng->priv;
2794         unsigned long flags;
2795
2796         /* Don't take wl->mutex here, as it could deadlock with
2797          * hwrng internal locking. It's not needed to take
2798          * wl->mutex here, anyway. */
2799
2800         spin_lock_irqsave(&wl->irq_lock, flags);
2801         *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
2802         spin_unlock_irqrestore(&wl->irq_lock, flags);
2803
2804         return (sizeof(u16));
2805 }
2806
2807 static void b43_rng_exit(struct b43_wl *wl, bool suspended)
2808 {
2809         if (wl->rng_initialized)
2810                 __hwrng_unregister(&wl->rng, suspended);
2811 }
2812
2813 static int b43_rng_init(struct b43_wl *wl)
2814 {
2815         int err;
2816
2817         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
2818                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
2819         wl->rng.name = wl->rng_name;
2820         wl->rng.data_read = b43_rng_read;
2821         wl->rng.priv = (unsigned long)wl;
2822         wl->rng_initialized = 1;
2823         err = hwrng_register(&wl->rng);
2824         if (err) {
2825                 wl->rng_initialized = 0;
2826                 b43err(wl, "Failed to register the random "
2827                        "number generator (%d)\n", err);
2828         }
2829
2830         return err;
2831 }
2832
2833 static int b43_op_tx(struct ieee80211_hw *hw,
2834                      struct sk_buff *skb,
2835                      struct ieee80211_tx_control *ctl)
2836 {
2837         struct b43_wl *wl = hw_to_b43_wl(hw);
2838         struct b43_wldev *dev = wl->current_dev;
2839         int err = -ENODEV;
2840
2841         if (unlikely(skb->len < 2 + 2 + 6)) {
2842                 /* Too short, this can't be a valid frame. */
2843                 return -EINVAL;
2844         }
2845         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
2846
2847         if (unlikely(!dev))
2848                 goto out;
2849         if (unlikely(b43_status(dev) < B43_STAT_STARTED))
2850                 goto out;
2851         /* TX is done without a global lock. */
2852         if (b43_using_pio_transfers(dev))
2853                 err = b43_pio_tx(dev, skb, ctl);
2854         else
2855                 err = b43_dma_tx(dev, skb, ctl);
2856 out:
2857         if (unlikely(err))
2858                 return NETDEV_TX_BUSY;
2859         return NETDEV_TX_OK;
2860 }
2861
2862 /* Locking: wl->irq_lock */
2863 static void b43_qos_params_upload(struct b43_wldev *dev,
2864                                   const struct ieee80211_tx_queue_params *p,
2865                                   u16 shm_offset)
2866 {
2867         u16 params[B43_NR_QOSPARAMS];
2868         int cw_min, cw_max, aifs, bslots, tmp;
2869         unsigned int i;
2870
2871         const u16 aCWmin = 0x0001;
2872         const u16 aCWmax = 0x03FF;
2873
2874         /* Calculate the default values for the parameters, if needed. */
2875         switch (shm_offset) {
2876         case B43_QOS_VOICE:
2877                 aifs = (p->aifs == -1) ? 2 : p->aifs;
2878                 cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 4 - 1) : p->cw_min;
2879                 cw_max = (p->cw_max == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_max;
2880                 break;
2881         case B43_QOS_VIDEO:
2882                 aifs = (p->aifs == -1) ? 2 : p->aifs;
2883                 cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_min;
2884                 cw_max = (p->cw_max == 0) ? aCWmin : p->cw_max;
2885                 break;
2886         case B43_QOS_BESTEFFORT:
2887                 aifs = (p->aifs == -1) ? 3 : p->aifs;
2888                 cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
2889                 cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
2890                 break;
2891         case B43_QOS_BACKGROUND:
2892                 aifs = (p->aifs == -1) ? 7 : p->aifs;
2893                 cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
2894                 cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
2895                 break;
2896         default:
2897                 B43_WARN_ON(1);
2898                 return;
2899         }
2900         if (cw_min <= 0)
2901                 cw_min = aCWmin;
2902         if (cw_max <= 0)
2903                 cw_max = aCWmin;
2904         bslots = b43_read16(dev, B43_MMIO_RNG) % cw_min;
2905
2906         memset(&params, 0, sizeof(params));
2907
2908         params[B43_QOSPARAM_TXOP] = p->txop * 32;
2909         params[B43_QOSPARAM_CWMIN] = cw_min;
2910         params[B43_QOSPARAM_CWMAX] = cw_max;
2911         params[B43_QOSPARAM_CWCUR] = cw_min;
2912         params[B43_QOSPARAM_AIFS] = aifs;
2913         params[B43_QOSPARAM_BSLOTS] = bslots;
2914         params[B43_QOSPARAM_REGGAP] = bslots + aifs;
2915
2916         for (i = 0; i < ARRAY_SIZE(params); i++) {
2917                 if (i == B43_QOSPARAM_STATUS) {
2918                         tmp = b43_shm_read16(dev, B43_SHM_SHARED,
2919                                              shm_offset + (i * 2));
2920                         /* Mark the parameters as updated. */
2921                         tmp |= 0x100;
2922                         b43_shm_write16(dev, B43_SHM_SHARED,
2923                                         shm_offset + (i * 2),
2924                                         tmp);
2925                 } else {
2926                         b43_shm_write16(dev, B43_SHM_SHARED,
2927                                         shm_offset + (i * 2),
2928                                         params[i]);
2929                 }
2930         }
2931 }
2932
2933 /* Update the QOS parameters in hardware. */
2934 static void b43_qos_update(struct b43_wldev *dev)
2935 {
2936         struct b43_wl *wl = dev->wl;
2937         struct b43_qos_params *params;
2938         unsigned long flags;
2939         unsigned int i;
2940
2941         /* Mapping of mac80211 queues to b43 SHM offsets. */
2942         static const u16 qos_shm_offsets[] = {
2943                 [0] = B43_QOS_VOICE,
2944                 [1] = B43_QOS_VIDEO,
2945                 [2] = B43_QOS_BESTEFFORT,
2946                 [3] = B43_QOS_BACKGROUND,
2947         };
2948         BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params));
2949
2950         b43_mac_suspend(dev);
2951         spin_lock_irqsave(&wl->irq_lock, flags);
2952
2953         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
2954                 params = &(wl->qos_params[i]);
2955                 if (params->need_hw_update) {
2956                         b43_qos_params_upload(dev, &(params->p),
2957                                               qos_shm_offsets[i]);
2958                         params->need_hw_update = 0;
2959                 }
2960         }
2961
2962         spin_unlock_irqrestore(&wl->irq_lock, flags);
2963         b43_mac_enable(dev);
2964 }
2965
2966 static void b43_qos_clear(struct b43_wl *wl)
2967 {
2968         struct b43_qos_params *params;
2969         unsigned int i;
2970
2971         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
2972                 params = &(wl->qos_params[i]);
2973
2974                 memset(&(params->p), 0, sizeof(params->p));
2975                 params->p.aifs = -1;
2976                 params->need_hw_update = 1;
2977         }
2978 }
2979
2980 /* Initialize the core's QOS capabilities */
2981 static void b43_qos_init(struct b43_wldev *dev)
2982 {
2983         struct b43_wl *wl = dev->wl;
2984         unsigned int i;
2985
2986         /* Upload the current QOS parameters. */
2987         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++)
2988                 wl->qos_params[i].need_hw_update = 1;
2989         b43_qos_update(dev);
2990
2991         /* Enable QOS support. */
2992         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
2993         b43_write16(dev, B43_MMIO_IFSCTL,
2994                     b43_read16(dev, B43_MMIO_IFSCTL)
2995                     | B43_MMIO_IFSCTL_USE_EDCF);
2996 }
2997
2998 static void b43_qos_update_work(struct work_struct *work)
2999 {
3000         struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work);
3001         struct b43_wldev *dev;
3002
3003         mutex_lock(&wl->mutex);
3004         dev = wl->current_dev;
3005         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED)))
3006                 b43_qos_update(dev);
3007         mutex_unlock(&wl->mutex);
3008 }
3009
3010 static int b43_op_conf_tx(struct ieee80211_hw *hw,
3011                           int _queue,
3012                           const struct ieee80211_tx_queue_params *params)
3013 {
3014         struct b43_wl *wl = hw_to_b43_wl(hw);
3015         unsigned long flags;
3016         unsigned int queue = (unsigned int)_queue;
3017         struct b43_qos_params *p;
3018
3019         if (queue >= ARRAY_SIZE(wl->qos_params)) {
3020                 /* Queue not available or don't support setting
3021                  * params on this queue. Return success to not
3022                  * confuse mac80211. */
3023                 return 0;
3024         }
3025
3026         spin_lock_irqsave(&wl->irq_lock, flags);
3027         p = &(wl->qos_params[queue]);
3028         memcpy(&(p->p), params, sizeof(p->p));
3029         p->need_hw_update = 1;
3030         spin_unlock_irqrestore(&wl->irq_lock, flags);
3031
3032         queue_work(hw->workqueue, &wl->qos_update_work);
3033
3034         return 0;
3035 }
3036
3037 static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
3038                                struct ieee80211_tx_queue_stats *stats)
3039 {
3040         struct b43_wl *wl = hw_to_b43_wl(hw);
3041         struct b43_wldev *dev = wl->current_dev;
3042         unsigned long flags;
3043         int err = -ENODEV;
3044
3045         if (!dev)
3046                 goto out;
3047         spin_lock_irqsave(&wl->irq_lock, flags);
3048         if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
3049                 if (b43_using_pio_transfers(dev))
3050                         b43_pio_get_tx_stats(dev, stats);
3051                 else
3052                         b43_dma_get_tx_stats(dev, stats);
3053                 err = 0;
3054         }
3055         spin_unlock_irqrestore(&wl->irq_lock, flags);
3056 out:
3057         return err;
3058 }
3059
3060 static int b43_op_get_stats(struct ieee80211_hw *hw,
3061                             struct ieee80211_low_level_stats *stats)
3062 {
3063         struct b43_wl *wl = hw_to_b43_wl(hw);
3064         unsigned long flags;
3065
3066         spin_lock_irqsave(&wl->irq_lock, flags);
3067         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
3068         spin_unlock_irqrestore(&wl->irq_lock, flags);
3069
3070         return 0;
3071 }
3072
3073 static void b43_put_phy_into_reset(struct b43_wldev *dev)
3074 {
3075         struct ssb_device *sdev = dev->dev;
3076         u32 tmslow;
3077
3078         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3079         tmslow &= ~B43_TMSLOW_GMODE;
3080         tmslow |= B43_TMSLOW_PHYRESET;
3081         tmslow |= SSB_TMSLOW_FGC;
3082         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3083         msleep(1);
3084
3085         tmslow = ssb_read32(sdev, SSB_TMSLOW);
3086         tmslow &= ~SSB_TMSLOW_FGC;
3087         tmslow |= B43_TMSLOW_PHYRESET;
3088         ssb_write32(sdev, SSB_TMSLOW, tmslow);
3089         msleep(1);
3090 }
3091
3092 static const char * band_to_string(enum ieee80211_band band)
3093 {
3094         switch (band) {
3095         case IEEE80211_BAND_5GHZ:
3096                 return "5";
3097         case IEEE80211_BAND_2GHZ:
3098                 return "2.4";
3099         default:
3100                 break;
3101         }
3102         B43_WARN_ON(1);
3103         return "";
3104 }
3105
3106 /* Expects wl->mutex locked */
3107 static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
3108 {
3109         struct b43_wldev *up_dev = NULL;
3110         struct b43_wldev *down_dev;
3111         struct b43_wldev *d;
3112         int err;
3113         bool gmode;
3114         int prev_status;
3115
3116         /* Find a device and PHY which supports the band. */
3117         list_for_each_entry(d, &wl->devlist, list) {
3118                 switch (chan->band) {
3119                 case IEEE80211_BAND_5GHZ:
3120                         if (d->phy.supports_5ghz) {
3121                                 up_dev = d;
3122                                 gmode = 0;
3123                         }
3124                         break;
3125                 case IEEE80211_BAND_2GHZ:
3126                         if (d->phy.supports_2ghz) {
3127                                 up_dev = d;
3128                                 gmode = 1;
3129                         }
3130                         break;
3131                 default:
3132                         B43_WARN_ON(1);
3133                         return -EINVAL;
3134                 }
3135                 if (up_dev)
3136                         break;
3137         }
3138         if (!up_dev) {
3139                 b43err(wl, "Could not find a device for %s-GHz band operation\n",
3140                        band_to_string(chan->band));
3141                 return -ENODEV;
3142         }
3143         if ((up_dev == wl->current_dev) &&
3144             (!!wl->current_dev->phy.gmode == !!gmode)) {
3145                 /* This device is already running. */
3146                 return 0;
3147         }
3148         b43dbg(wl, "Switching to %s-GHz band\n",
3149                band_to_string(chan->band));
3150         down_dev = wl->current_dev;
3151
3152         prev_status = b43_status(down_dev);
3153         /* Shutdown the currently running core. */
3154         if (prev_status >= B43_STAT_STARTED)
3155                 b43_wireless_core_stop(down_dev);
3156         if (prev_status >= B43_STAT_INITIALIZED)
3157                 b43_wireless_core_exit(down_dev);
3158
3159         if (down_dev != up_dev) {
3160                 /* We switch to a different core, so we put PHY into
3161                  * RESET on the old core. */
3162                 b43_put_phy_into_reset(down_dev);
3163         }
3164
3165         /* Now start the new core. */
3166         up_dev->phy.gmode = gmode;
3167         if (prev_status >= B43_STAT_INITIALIZED) {
3168                 err = b43_wireless_core_init(up_dev);
3169                 if (err) {
3170                         b43err(wl, "Fatal: Could not initialize device for "
3171                                "selected %s-GHz band\n",
3172                                band_to_string(chan->band));
3173                         goto init_failure;
3174                 }
3175         }
3176         if (prev_status >= B43_STAT_STARTED) {
3177                 err = b43_wireless_core_start(up_dev);
3178                 if (err) {
3179                         b43err(wl, "Fatal: Coult not start device for "
3180                                "selected %s-GHz band\n",
3181                                band_to_string(chan->band));
3182                         b43_wireless_core_exit(up_dev);
3183                         goto init_failure;
3184                 }
3185         }
3186         B43_WARN_ON(b43_status(up_dev) != prev_status);
3187
3188         wl->current_dev = up_dev;
3189
3190         return 0;
3191 init_failure:
3192         /* Whoops, failed to init the new core. No core is operating now. */
3193         wl->current_dev = NULL;
3194         return err;
3195 }
3196
3197 static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
3198 {
3199         struct b43_wl *wl = hw_to_b43_wl(hw);
3200         struct b43_wldev *dev;
3201         struct b43_phy *phy;
3202         unsigned long flags;
3203         int antenna;
3204         int err = 0;
3205         u32 savedirqs;
3206
3207         mutex_lock(&wl->mutex);
3208
3209         /* Switch the band (if necessary). This might change the active core. */
3210         err = b43_switch_band(wl, conf->channel);
3211         if (err)
3212                 goto out_unlock_mutex;
3213         dev = wl->current_dev;
3214         phy = &dev->phy;
3215
3216         /* Disable IRQs while reconfiguring the device.
3217          * This makes it possible to drop the spinlock throughout
3218          * the reconfiguration process. */
3219         spin_lock_irqsave(&wl->irq_lock, flags);
3220         if (b43_status(dev) < B43_STAT_STARTED) {
3221                 spin_unlock_irqrestore(&wl->irq_lock, flags);
3222                 goto out_unlock_mutex;
3223         }
3224         savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL);
3225         spin_unlock_irqrestore(&wl->irq_lock, flags);
3226         b43_synchronize_irq(dev);
3227
3228         /* Switch to the requested channel.
3229          * The firmware takes care of races with the TX handler. */
3230         if (conf->channel->hw_value != phy->channel)
3231                 b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
3232
3233         /* Enable/Disable ShortSlot timing. */
3234         if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
3235             dev->short_slot) {
3236                 B43_WARN_ON(phy->type != B43_PHYTYPE_G);
3237                 if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
3238                         b43_short_slot_timing_enable(dev);
3239                 else
3240                         b43_short_slot_timing_disable(dev);
3241         }
3242
3243         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
3244
3245         /* Adjust the desired TX power level. */
3246         if (conf->power_level != 0) {
3247                 if (conf->power_level != phy->power_level) {
3248                         phy->power_level = conf->power_level;
3249                         b43_phy_xmitpower(dev);
3250                 }
3251         }
3252
3253         /* Antennas for RX and management frame TX. */
3254         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
3255         b43_mgmtframe_txantenna(dev, antenna);
3256         antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
3257         b43_set_rx_antenna(dev, antenna);
3258
3259         /* Update templates for AP mode. */
3260         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
3261                 b43_set_beacon_int(dev, conf->beacon_int);
3262
3263         if (!!conf->radio_enabled != phy->radio_on) {
3264                 if (conf->radio_enabled) {
3265                         b43_radio_turn_on(dev);
3266                         b43info(dev->wl, "Radio turned on by software\n");
3267                         if (!dev->radio_hw_enable) {
3268                                 b43info(dev->wl, "The hardware RF-kill button "
3269                                         "still turns the radio physically off. "
3270                                         "Press the button to turn it on.\n");
3271                         }
3272                 } else {
3273                         b43_radio_turn_off(dev, 0);
3274                         b43info(dev->wl, "Radio turned off by software\n");
3275                 }
3276         }
3277
3278         spin_lock_irqsave(&wl->irq_lock, flags);
3279         b43_interrupt_enable(dev, savedirqs);
3280         mmiowb();
3281         spin_unlock_irqrestore(&wl->irq_lock, flags);
3282       out_unlock_mutex:
3283         mutex_unlock(&wl->mutex);
3284
3285         return err;
3286 }
3287
3288 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3289                            const u8 *local_addr, const u8 *addr,
3290                            struct ieee80211_key_conf *key)
3291 {
3292         struct b43_wl *wl = hw_to_b43_wl(hw);
3293         struct b43_wldev *dev;
3294         unsigned long flags;
3295         u8 algorithm;
3296         u8 index;
3297         int err;
3298         DECLARE_MAC_BUF(mac);
3299
3300         if (modparam_nohwcrypt)
3301                 return -ENOSPC; /* User disabled HW-crypto */
3302
3303         mutex_lock(&wl->mutex);
3304         spin_lock_irqsave(&wl->irq_lock, flags);
3305
3306         dev = wl->current_dev;
3307         err = -ENODEV;
3308         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
3309                 goto out_unlock;
3310
3311         err = -EINVAL;
3312         switch (key->alg) {
3313         case ALG_WEP:
3314                 if (key->keylen == 5)
3315                         algorithm = B43_SEC_ALGO_WEP40;
3316                 else
3317                         algorithm = B43_SEC_ALGO_WEP104;
3318                 break;
3319         case ALG_TKIP:
3320                 algorithm = B43_SEC_ALGO_TKIP;
3321                 break;
3322         case ALG_CCMP:
3323                 algorithm = B43_SEC_ALGO_AES;
3324                 break;
3325         default:
3326                 B43_WARN_ON(1);
3327                 goto out_unlock;
3328         }
3329         index = (u8) (key->keyidx);
3330         if (index > 3)
3331                 goto out_unlock;
3332
3333         switch (cmd) {
3334         case SET_KEY:
3335                 if (algorithm == B43_SEC_ALGO_TKIP) {
3336                         /* FIXME: No TKIP hardware encryption for now. */
3337                         err = -EOPNOTSUPP;
3338                         goto out_unlock;
3339                 }
3340
3341                 if (is_broadcast_ether_addr(addr)) {
3342                         /* addr is FF:FF:FF:FF:FF:FF for default keys */
3343                         err = b43_key_write(dev, index, algorithm,
3344                                             key->key, key->keylen, NULL, key);
3345                 } else {
3346                         /*
3347                          * either pairwise key or address is 00:00:00:00:00:00
3348                          * for transmit-only keys
3349                          */
3350                         err = b43_key_write(dev, -1, algorithm,
3351                                             key->key, key->keylen, addr, key);
3352                 }
3353                 if (err)
3354                         goto out_unlock;
3355
3356                 if (algorithm == B43_SEC_ALGO_WEP40 ||
3357                     algorithm == B43_SEC_ALGO_WEP104) {
3358                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
3359                 } else {
3360                         b43_hf_write(dev,
3361                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
3362                 }
3363                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3364                 break;
3365         case DISABLE_KEY: {
3366                 err = b43_key_clear(dev, key->hw_key_idx);
3367                 if (err)
3368                         goto out_unlock;
3369                 break;
3370         }
3371         default:
3372                 B43_WARN_ON(1);
3373         }
3374 out_unlock:
3375         spin_unlock_irqrestore(&wl->irq_lock, flags);
3376         mutex_unlock(&wl->mutex);
3377         if (!err) {
3378                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
3379                        "mac: %s\n",
3380                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
3381                        print_mac(mac, addr));
3382         }
3383         return err;
3384 }
3385
3386 static void b43_op_configure_filter(struct ieee80211_hw *hw,
3387                                     unsigned int changed, unsigned int *fflags,
3388                                     int mc_count, struct dev_addr_list *mc_list)
3389 {
3390         struct b43_wl *wl = hw_to_b43_wl(hw);
3391         struct b43_wldev *dev = wl->current_dev;
3392         unsigned long flags;
3393
3394         if (!dev) {
3395                 *fflags = 0;
3396                 return;
3397         }
3398
3399         spin_lock_irqsave(&wl->irq_lock, flags);
3400         *fflags &= FIF_PROMISC_IN_BSS |
3401                   FIF_ALLMULTI |
3402                   FIF_FCSFAIL |
3403                   FIF_PLCPFAIL |
3404                   FIF_CONTROL |
3405                   FIF_OTHER_BSS |
3406                   FIF_BCN_PRBRESP_PROMISC;
3407
3408         changed &= FIF_PROMISC_IN_BSS |
3409                    FIF_ALLMULTI |
3410                    FIF_FCSFAIL |
3411                    FIF_PLCPFAIL |
3412                    FIF_CONTROL |
3413                    FIF_OTHER_BSS |
3414                    FIF_BCN_PRBRESP_PROMISC;
3415
3416         wl->filter_flags = *fflags;
3417
3418         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
3419                 b43_adjust_opmode(dev);
3420         spin_unlock_irqrestore(&wl->irq_lock, flags);
3421 }
3422
3423 static int b43_op_config_interface(struct ieee80211_hw *hw,
3424                                    struct ieee80211_vif *vif,
3425                                    struct ieee80211_if_conf *conf)
3426 {
3427         struct b43_wl *wl = hw_to_b43_wl(hw);
3428         struct b43_wldev *dev = wl->current_dev;
3429         unsigned long flags;
3430
3431         if (!dev)
3432                 return -ENODEV;
3433         mutex_lock(&wl->mutex);
3434         spin_lock_irqsave(&wl->irq_lock, flags);
3435         B43_WARN_ON(wl->vif != vif);
3436         if (conf->bssid)
3437                 memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3438         else
3439                 memset(wl->bssid, 0, ETH_ALEN);
3440         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3441                 if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
3442                         B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
3443                         b43_set_ssid(dev, conf->ssid, conf->ssid_len);
3444                         if (conf->beacon) {
3445                                 b43_update_templates(wl, conf->beacon,
3446                                                      conf->beacon_control);
3447                         }
3448                 }
3449                 b43_write_mac_bssid_templates(dev);
3450         }
3451         spin_unlock_irqrestore(&wl->irq_lock, flags);
3452         mutex_unlock(&wl->mutex);
3453
3454         return 0;
3455 }
3456
3457 /* Locking: wl->mutex */
3458 static void b43_wireless_core_stop(struct b43_wldev *dev)
3459 {
3460         struct b43_wl *wl = dev->wl;
3461         unsigned long flags;
3462
3463         if (b43_status(dev) < B43_STAT_STARTED)
3464                 return;
3465
3466         /* Disable and sync interrupts. We must do this before than
3467          * setting the status to INITIALIZED, as the interrupt handler
3468          * won't care about IRQs then. */
3469         spin_lock_irqsave(&wl->irq_lock, flags);
3470         dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
3471         b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
3472         spin_unlock_irqrestore(&wl->irq_lock, flags);
3473         b43_synchronize_irq(dev);
3474
3475         b43_set_status(dev, B43_STAT_INITIALIZED);
3476
3477         b43_pio_stop(dev);
3478         mutex_unlock(&wl->mutex);
3479         /* Must unlock as it would otherwise deadlock. No races here.
3480          * Cancel the possibly running self-rearming periodic work. */
3481         cancel_delayed_work_sync(&dev->periodic_work);
3482         mutex_lock(&wl->mutex);
3483
3484         ieee80211_stop_queues(wl->hw);  //FIXME this could cause a deadlock, as mac80211 seems buggy.
3485
3486         b43_mac_suspend(dev);
3487         free_irq(dev->dev->irq, dev);
3488         b43dbg(wl, "Wireless interface stopped\n");
3489 }
3490
3491 /* Locking: wl->mutex */
3492 static int b43_wireless_core_start(struct b43_wldev *dev)
3493 {
3494         int err;
3495
3496         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
3497
3498         drain_txstatus_queue(dev);
3499         err = request_irq(dev->dev->irq, b43_interrupt_handler,
3500                           IRQF_SHARED, KBUILD_MODNAME, dev);
3501         if (err) {
3502                 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
3503                 goto out;
3504         }
3505
3506         /* We are ready to run. */
3507         b43_set_status(dev, B43_STAT_STARTED);
3508
3509         /* Start data flow (TX/RX). */
3510         b43_mac_enable(dev);
3511         b43_interrupt_enable(dev, dev->irq_savedstate);
3512         ieee80211_start_queues(dev->wl->hw);
3513
3514         /* Start maintainance work */
3515         b43_periodic_tasks_setup(dev);
3516
3517         b43dbg(dev->wl, "Wireless interface started\n");
3518       out:
3519         return err;
3520 }
3521
3522 /* Get PHY and RADIO versioning numbers */
3523 static int b43_phy_versioning(struct b43_wldev *dev)
3524 {
3525         struct b43_phy *phy = &dev->phy;
3526         u32 tmp;
3527         u8 analog_type;
3528         u8 phy_type;
3529         u8 phy_rev;
3530         u16 radio_manuf;
3531         u16 radio_ver;
3532         u16 radio_rev;
3533         int unsupported = 0;
3534
3535         /* Get PHY versioning */
3536         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
3537         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
3538         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
3539         phy_rev = (tmp & B43_PHYVER_VERSION);
3540         switch (phy_type) {
3541         case B43_PHYTYPE_A:
3542                 if (phy_rev >= 4)
3543                         unsupported = 1;
3544                 break;
3545         case B43_PHYTYPE_B:
3546                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
3547                     && phy_rev != 7)
3548                         unsupported = 1;
3549                 break;
3550         case B43_PHYTYPE_G:
3551                 if (phy_rev > 9)
3552                         unsupported = 1;
3553                 break;
3554 #ifdef CONFIG_B43_NPHY
3555         case B43_PHYTYPE_N:
3556                 if (phy_rev > 1)
3557                         unsupported = 1;
3558                 break;
3559 #endif
3560         default:
3561                 unsupported = 1;
3562         };
3563         if (unsupported) {
3564                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
3565                        "(Analog %u, Type %u, Revision %u)\n",
3566                        analog_type, phy_type, phy_rev);
3567                 return -EOPNOTSUPP;
3568         }
3569         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
3570                analog_type, phy_type, phy_rev);
3571
3572         /* Get RADIO versioning */
3573         if (dev->dev->bus->chip_id == 0x4317) {
3574                 if (dev->dev->bus->chip_rev == 0)
3575                         tmp = 0x3205017F;
3576                 else if (dev->dev->bus->chip_rev == 1)
3577                         tmp = 0x4205017F;
3578                 else
3579                         tmp = 0x5205017F;
3580         } else {
3581                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3582                 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
3583                 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
3584                 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
3585         }
3586         radio_manuf = (tmp & 0x00000FFF);
3587         radio_ver = (tmp & 0x0FFFF000) >> 12;
3588         radio_rev = (tmp & 0xF0000000) >> 28;
3589         if (radio_manuf != 0x17F /* Broadcom */)
3590                 unsupported = 1;
3591         switch (phy_type) {
3592         case B43_PHYTYPE_A:
3593                 if (radio_ver != 0x2060)
3594                         unsupported = 1;
3595                 if (radio_rev != 1)
3596                         unsupported = 1;
3597                 if (radio_manuf != 0x17F)
3598                         unsupported = 1;
3599                 break;
3600         case B43_PHYTYPE_B:
3601                 if ((radio_ver & 0xFFF0) != 0x2050)
3602                         unsupported = 1;
3603                 break;
3604         case B43_PHYTYPE_G:
3605                 if (radio_ver != 0x2050)
3606                         unsupported = 1;
3607                 break;
3608         case B43_PHYTYPE_N:
3609                 if (radio_ver != 0x2055)
3610                         unsupported = 1;
3611                 break;
3612         default:
3613                 B43_WARN_ON(1);
3614         }
3615         if (unsupported) {
3616                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
3617                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
3618                        radio_manuf, radio_ver, radio_rev);
3619                 return -EOPNOTSUPP;
3620         }
3621         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
3622                radio_manuf, radio_ver, radio_rev);
3623
3624         phy->radio_manuf = radio_manuf;
3625         phy->radio_ver = radio_ver;
3626         phy->radio_rev = radio_rev;
3627
3628         phy->analog = analog_type;
3629         phy->type = phy_type;
3630         phy->rev = phy_rev;
3631
3632         return 0;
3633 }
3634
3635 static void setup_struct_phy_for_init(struct b43_wldev *dev,
3636                                       struct b43_phy *phy)
3637 {
3638         struct b43_txpower_lo_control *lo;
3639         int i;
3640
3641         memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
3642         memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
3643
3644         phy->aci_enable = 0;
3645         phy->aci_wlan_automatic = 0;
3646         phy->aci_hw_rssi = 0;
3647
3648         phy->radio_off_context.valid = 0;
3649
3650         lo = phy->lo_control;
3651         if (lo) {
3652                 memset(lo, 0, sizeof(*(phy->lo_control)));
3653                 lo->rebuild = 1;
3654                 lo->tx_bias = 0xFF;
3655         }
3656         phy->max_lb_gain = 0;
3657         phy->trsw_rx_gain = 0;
3658         phy->txpwr_offset = 0;
3659
3660         /* NRSSI */
3661         phy->nrssislope = 0;
3662         for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
3663                 phy->nrssi[i] = -1000;
3664         for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
3665                 phy->nrssi_lt[i] = i;
3666
3667         phy->lofcal = 0xFFFF;
3668         phy->initval = 0xFFFF;
3669
3670         phy->interfmode = B43_INTERFMODE_NONE;
3671         phy->channel = 0xFF;
3672
3673         phy->hardware_power_control = !!modparam_hwpctl;
3674
3675         /* PHY TX errors counter. */
3676         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3677
3678         /* OFDM-table address caching. */
3679         phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
3680 }
3681
3682 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
3683 {
3684         dev->dfq_valid = 0;
3685
3686         /* Assume the radio is enabled. If it's not enabled, the state will
3687          * immediately get fixed on the first periodic work run. */
3688         dev->radio_hw_enable = 1;
3689
3690         /* Stats */
3691         memset(&dev->stats, 0, sizeof(dev->stats));
3692
3693         setup_struct_phy_for_init(dev, &dev->phy);
3694
3695         /* IRQ related flags */
3696         dev->irq_reason = 0;
3697         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
3698         dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
3699
3700         dev->mac_suspended = 1;
3701
3702         /* Noise calculation context */
3703         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
3704 }
3705
3706 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
3707 {
3708         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
3709         u32 hf;
3710
3711         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
3712                 return;
3713         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
3714                 return;
3715
3716         hf = b43_hf_read(dev);
3717         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
3718                 hf |= B43_HF_BTCOEXALT;
3719         else
3720                 hf |= B43_HF_BTCOEX;
3721         b43_hf_write(dev, hf);
3722         //TODO
3723 }
3724
3725 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
3726 {                               //TODO
3727 }
3728
3729 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
3730 {
3731 #ifdef CONFIG_SSB_DRIVER_PCICORE
3732         struct ssb_bus *bus = dev->dev->bus;
3733         u32 tmp;
3734
3735         if (bus->pcicore.dev &&
3736             bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
3737             bus->pcicore.dev->id.revision <= 5) {
3738                 /* IMCFGLO timeouts workaround. */
3739                 tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
3740                 tmp &= ~SSB_IMCFGLO_REQTO;
3741                 tmp &= ~SSB_IMCFGLO_SERTO;
3742                 switch (bus->bustype) {
3743                 case SSB_BUSTYPE_PCI:
3744                 case SSB_BUSTYPE_PCMCIA:
3745                         tmp |= 0x32;
3746                         break;
3747                 case SSB_BUSTYPE_SSB:
3748                         tmp |= 0x53;
3749                         break;
3750                 }
3751                 ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
3752         }
3753 #endif /* CONFIG_SSB_DRIVER_PCICORE */
3754 }
3755
3756 /* Write the short and long frame retry limit values. */
3757 static void b43_set_retry_limits(struct b43_wldev *dev,
3758                                  unsigned int short_retry,
3759                                  unsigned int long_retry)
3760 {
3761         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3762          * the chip-internal counter. */
3763         short_retry = min(short_retry, (unsigned int)0xF);
3764         long_retry = min(long_retry, (unsigned int)0xF);
3765
3766         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3767                         short_retry);
3768         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3769                         long_retry);
3770 }
3771
3772 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
3773 {
3774         u16 pu_delay;
3775
3776         /* The time value is in microseconds. */
3777         if (dev->phy.type == B43_PHYTYPE_A)
3778                 pu_delay = 3700;
3779         else
3780                 pu_delay = 1050;
3781         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
3782                 pu_delay = 500;
3783         if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
3784                 pu_delay = max(pu_delay, (u16)2400);
3785
3786         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
3787 }
3788
3789 /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
3790 static void b43_set_pretbtt(struct b43_wldev *dev)
3791 {
3792         u16 pretbtt;
3793
3794         /* The time value is in microseconds. */
3795         if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
3796                 pretbtt = 2;
3797         } else {
3798                 if (dev->phy.type == B43_PHYTYPE_A)
3799                         pretbtt = 120;
3800                 else
3801                         pretbtt = 250;
3802         }
3803         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
3804         b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
3805 }
3806
3807 /* Shutdown a wireless core */
3808 /* Locking: wl->mutex */
3809 static void b43_wireless_core_exit(struct b43_wldev *dev)
3810 {
3811         struct b43_phy *phy = &dev->phy;
3812         u32 macctl;
3813
3814         B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
3815         if (b43_status(dev) != B43_STAT_INITIALIZED)
3816                 return;
3817         b43_set_status(dev, B43_STAT_UNINIT);
3818
3819         /* Stop the microcode PSM. */
3820         macctl = b43_read32(dev, B43_MMIO_MACCTL);
3821         macctl &= ~B43_MACCTL_PSM_RUN;
3822         macctl |= B43_MACCTL_PSM_JMP0;
3823         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3824
3825         if (!dev->suspend_in_progress) {
3826                 b43_leds_exit(dev);
3827                 b43_rng_exit(dev->wl, false);
3828         }
3829         b43_dma_free(dev);
3830         b43_pio_free(dev);
3831         b43_chip_exit(dev);
3832         b43_radio_turn_off(dev, 1);
3833         b43_switch_analog(dev, 0);
3834         if (phy->dyn_tssi_tbl)
3835                 kfree(phy->tssi2dbm);
3836         kfree(phy->lo_control);
3837         phy->lo_control = NULL;
3838         if (dev->wl->current_beacon) {
3839                 dev_kfree_skb_any(dev->wl->current_beacon);
3840                 dev->wl->current_beacon = NULL;
3841         }
3842
3843         ssb_device_disable(dev->dev, 0);
3844         ssb_bus_may_powerdown(dev->dev->bus);
3845 }
3846
3847 /* Initialize a wireless core */
3848 static int b43_wireless_core_init(struct b43_wldev *dev)
3849 {
3850         struct b43_wl *wl = dev->wl;
3851         struct ssb_bus *bus = dev->dev->bus;
3852         struct ssb_sprom *sprom = &bus->sprom;
3853         struct b43_phy *phy = &dev->phy;
3854         int err;
3855         u32 hf, tmp;
3856
3857         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3858
3859         err = ssb_bus_powerup(bus, 0);
3860         if (err)
3861                 goto out;
3862         if (!ssb_device_is_enabled(dev->dev)) {
3863                 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
3864                 b43_wireless_core_reset(dev, tmp);
3865         }
3866
3867         if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
3868                 phy->lo_control =
3869                     kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
3870                 if (!phy->lo_control) {
3871                         err = -ENOMEM;
3872                         goto err_busdown;
3873                 }
3874         }
3875         setup_struct_wldev_for_init(dev);
3876
3877         err = b43_phy_init_tssi2dbm_table(dev);
3878         if (err)
3879                 goto err_kfree_lo_control;
3880
3881         /* Enable IRQ routing to this device. */
3882         ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
3883
3884         b43_imcfglo_timeouts_workaround(dev);
3885         b43_bluetooth_coext_disable(dev);
3886         b43_phy_early_init(dev);
3887         err = b43_chip_init(dev);
3888         if (err)
3889                 goto err_kfree_tssitbl;
3890         b43_shm_write16(dev, B43_SHM_SHARED,
3891                         B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
3892         hf = b43_hf_read(dev);
3893         if (phy->type == B43_PHYTYPE_G) {
3894                 hf |= B43_HF_SYMW;
3895                 if (phy->rev == 1)
3896                         hf |= B43_HF_GDCW;
3897                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
3898                         hf |= B43_HF_OFDMPABOOST;
3899         } else if (phy->type == B43_PHYTYPE_B) {
3900                 hf |= B43_HF_SYMW;
3901                 if (phy->rev >= 2 && phy->radio_ver == 0x2050)
3902                         hf &= ~B43_HF_GDCW;
3903         }
3904         b43_hf_write(dev, hf);
3905
3906         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
3907                              B43_DEFAULT_LONG_RETRY_LIMIT);
3908         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
3909         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
3910
3911         /* Disable sending probe responses from firmware.
3912          * Setting the MaxTime to one usec will always trigger
3913          * a timeout, so we never send any probe resp.
3914          * A timeout of zero is infinite. */
3915         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
3916
3917         b43_rate_memory_init(dev);
3918         b43_set_phytxctl_defaults(dev);
3919
3920         /* Minimum Contention Window */
3921         if (phy->type == B43_PHYTYPE_B) {
3922                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
3923         } else {
3924                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
3925         }
3926         /* Maximum Contention Window */
3927         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
3928
3929         if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
3930                 dev->__using_pio_transfers = 1;
3931                 err = b43_pio_init(dev);
3932         } else {
3933                 dev->__using_pio_transfers = 0;
3934                 err = b43_dma_init(dev);
3935         }
3936         if (err)
3937                 goto err_chip_exit;
3938         b43_qos_init(dev);
3939         b43_set_synth_pu_delay(dev, 1);
3940         b43_bluetooth_coext_enable(dev);
3941
3942         ssb_bus_powerup(bus, 1);        /* Enable dynamic PCTL */
3943         b43_upload_card_macaddress(dev);
3944         b43_security_init(dev);
3945         if (!dev->suspend_in_progress)
3946                 b43_rng_init(wl);
3947
3948         b43_set_status(dev, B43_STAT_INITIALIZED);
3949
3950         if (!dev->suspend_in_progress)
3951                 b43_leds_init(dev);
3952 out:
3953         return err;
3954
3955       err_chip_exit:
3956         b43_chip_exit(dev);
3957       err_kfree_tssitbl:
3958         if (phy->dyn_tssi_tbl)
3959                 kfree(phy->tssi2dbm);
3960       err_kfree_lo_control:
3961         kfree(phy->lo_control);
3962         phy->lo_control = NULL;
3963       err_busdown:
3964         ssb_bus_may_powerdown(bus);
3965         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
3966         return err;
3967 }
3968
3969 static int b43_op_add_interface(struct ieee80211_hw *hw,
3970                                 struct ieee80211_if_init_conf *conf)
3971 {
3972         struct b43_wl *wl = hw_to_b43_wl(hw);
3973         struct b43_wldev *dev;
3974         unsigned long flags;
3975         int err = -EOPNOTSUPP;
3976
3977         /* TODO: allow WDS/AP devices to coexist */
3978
3979         if (conf->type != IEEE80211_IF_TYPE_AP &&
3980             conf->type != IEEE80211_IF_TYPE_STA &&
3981             conf->type != IEEE80211_IF_TYPE_WDS &&
3982             conf->type != IEEE80211_IF_TYPE_IBSS)
3983                 return -EOPNOTSUPP;
3984
3985         mutex_lock(&wl->mutex);
3986         if (wl->operating)
3987                 goto out_mutex_unlock;
3988
3989         b43dbg(wl, "Adding Interface type %d\n", conf->type);
3990
3991         dev = wl->current_dev;
3992         wl->operating = 1;
3993         wl->vif = conf->vif;
3994         wl->if_type = conf->type;
3995         memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
3996
3997         spin_lock_irqsave(&wl->irq_lock, flags);
3998         b43_adjust_opmode(dev);
3999         b43_set_pretbtt(dev);
4000         b43_set_synth_pu_delay(dev, 0);
4001         b43_upload_card_macaddress(dev);
4002         spin_unlock_irqrestore(&wl->irq_lock, flags);
4003
4004         err = 0;
4005  out_mutex_unlock:
4006         mutex_unlock(&wl->mutex);
4007
4008         return err;
4009 }
4010
4011 static void b43_op_remove_interface(struct ieee80211_hw *hw,
4012                                     struct ieee80211_if_init_conf *conf)
4013 {
4014         struct b43_wl *wl = hw_to_b43_wl(hw);
4015         struct b43_wldev *dev = wl->current_dev;
4016         unsigned long flags;
4017
4018         b43dbg(wl, "Removing Interface type %d\n", conf->type);
4019
4020         mutex_lock(&wl->mutex);
4021
4022         B43_WARN_ON(!wl->operating);
4023         B43_WARN_ON(wl->vif != conf->vif);
4024         wl->vif = NULL;
4025
4026         wl->operating = 0;
4027
4028         spin_lock_irqsave(&wl->irq_lock, flags);
4029         b43_adjust_opmode(dev);
4030         memset(wl->mac_addr, 0, ETH_ALEN);
4031         b43_upload_card_macaddress(dev);
4032         spin_unlock_irqrestore(&wl->irq_lock, flags);
4033
4034         mutex_unlock(&wl->mutex);
4035 }
4036
4037 static int b43_op_start(struct ieee80211_hw *hw)
4038 {
4039         struct b43_wl *wl = hw_to_b43_wl(hw);
4040         struct b43_wldev *dev = wl->current_dev;
4041         int did_init = 0;
4042         int err = 0;
4043         bool do_rfkill_exit = 0;
4044
4045         /* Kill all old instance specific information to make sure
4046          * the card won't use it in the short timeframe between start
4047          * and mac80211 reconfiguring it. */
4048         memset(wl->bssid, 0, ETH_ALEN);
4049         memset(wl->mac_addr, 0, ETH_ALEN);
4050         wl->filter_flags = 0;
4051         wl->radiotap_enabled = 0;
4052         b43_qos_clear(wl);
4053
4054         /* First register RFkill.
4055          * LEDs that are registered later depend on it. */
4056         b43_rfkill_init(dev);
4057
4058         mutex_lock(&wl->mutex);
4059
4060         if (b43_status(dev) < B43_STAT_INITIALIZED) {
4061                 err = b43_wireless_core_init(dev);
4062                 if (err) {
4063                         do_rfkill_exit = 1;
4064                         goto out_mutex_unlock;
4065                 }
4066                 did_init = 1;
4067         }
4068
4069         if (b43_status(dev) < B43_STAT_STARTED) {
4070                 err = b43_wireless_core_start(dev);
4071                 if (err) {
4072                         if (did_init)
4073                                 b43_wireless_core_exit(dev);
4074                         do_rfkill_exit = 1;
4075                         goto out_mutex_unlock;
4076                 }
4077         }
4078
4079  out_mutex_unlock:
4080         mutex_unlock(&wl->mutex);
4081
4082         if (do_rfkill_exit)
4083                 b43_rfkill_exit(dev);
4084
4085         return err;
4086 }
4087
4088 static void b43_op_stop(struct ieee80211_hw *hw)
4089 {
4090         struct b43_wl *wl = hw_to_b43_wl(hw);
4091         struct b43_wldev *dev = wl->current_dev;
4092
4093         b43_rfkill_exit(dev);
4094         cancel_work_sync(&(wl->qos_update_work));
4095         cancel_work_sync(&(wl->beacon_update_trigger));
4096
4097         mutex_lock(&wl->mutex);
4098         if (b43_status(dev) >= B43_STAT_STARTED)
4099                 b43_wireless_core_stop(dev);
4100         b43_wireless_core_exit(dev);
4101         mutex_unlock(&wl->mutex);
4102 }
4103
4104 static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
4105                                   u32 short_retry_limit, u32 long_retry_limit)
4106 {
4107         struct b43_wl *wl = hw_to_b43_wl(hw);
4108         struct b43_wldev *dev;
4109         int err = 0;
4110
4111         mutex_lock(&wl->mutex);
4112         dev = wl->current_dev;
4113         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
4114                 err = -ENODEV;
4115                 goto out_unlock;
4116         }
4117         b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
4118 out_unlock:
4119         mutex_unlock(&wl->mutex);
4120
4121         return err;
4122 }
4123
4124 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
4125 {
4126         struct b43_wl *wl = hw_to_b43_wl(hw);
4127         struct sk_buff *beacon;
4128         unsigned long flags;
4129         struct ieee80211_tx_control txctl;
4130
4131         /* We could modify the existing beacon and set the aid bit in
4132          * the TIM field, but that would probably require resizing and
4133          * moving of data within the beacon template.
4134          * Simply request a new beacon and let mac80211 do the hard work. */
4135         beacon = ieee80211_beacon_get(hw, wl->vif, &txctl);
4136         if (unlikely(!beacon))
4137                 return -ENOMEM;
4138         spin_lock_irqsave(&wl->irq_lock, flags);
4139         b43_update_templates(wl, beacon, &txctl);
4140         spin_unlock_irqrestore(&wl->irq_lock, flags);
4141
4142         return 0;
4143 }
4144
4145 static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
4146                                      struct sk_buff *beacon,
4147                                      struct ieee80211_tx_control *ctl)
4148 {
4149         struct b43_wl *wl = hw_to_b43_wl(hw);
4150         unsigned long flags;
4151
4152         spin_lock_irqsave(&wl->irq_lock, flags);
4153         b43_update_templates(wl, beacon, ctl);
4154         spin_unlock_irqrestore(&wl->irq_lock, flags);
4155
4156         return 0;
4157 }
4158
4159 static void b43_op_sta_notify(struct ieee80211_hw *hw,
4160                               struct ieee80211_vif *vif,
4161                               enum sta_notify_cmd notify_cmd,
4162                               const u8 *addr)
4163 {
4164         struct b43_wl *wl = hw_to_b43_wl(hw);
4165
4166         B43_WARN_ON(!vif || wl->vif != vif);
4167 }
4168
4169 static const struct ieee80211_ops b43_hw_ops = {
4170         .tx                     = b43_op_tx,
4171         .conf_tx                = b43_op_conf_tx,
4172         .add_interface          = b43_op_add_interface,
4173         .remove_interface       = b43_op_remove_interface,
4174         .config                 = b43_op_config,
4175         .config_interface       = b43_op_config_interface,
4176         .configure_filter       = b43_op_configure_filter,
4177         .set_key                = b43_op_set_key,
4178         .get_stats              = b43_op_get_stats,
4179         .get_tx_stats           = b43_op_get_tx_stats,
4180         .start                  = b43_op_start,
4181         .stop                   = b43_op_stop,
4182         .set_retry_limit        = b43_op_set_retry_limit,
4183         .set_tim                = b43_op_beacon_set_tim,
4184         .beacon_update          = b43_op_ibss_beacon_update,
4185         .sta_notify             = b43_op_sta_notify,
4186 };
4187
4188 /* Hard-reset the chip. Do not call this directly.
4189  * Use b43_controller_restart()
4190  */
4191 static void b43_chip_reset(struct work_struct *work)
4192 {
4193         struct b43_wldev *dev =
4194             container_of(work, struct b43_wldev, restart_work);
4195         struct b43_wl *wl = dev->wl;
4196         int err = 0;
4197         int prev_status;
4198
4199         mutex_lock(&wl->mutex);
4200
4201         prev_status = b43_status(dev);
4202         /* Bring the device down... */
4203         if (prev_status >= B43_STAT_STARTED)
4204                 b43_wireless_core_stop(dev);
4205         if (prev_status >= B43_STAT_INITIALIZED)
4206                 b43_wireless_core_exit(dev);
4207
4208         /* ...and up again. */
4209         if (prev_status >= B43_STAT_INITIALIZED) {
4210                 err = b43_wireless_core_init(dev);
4211                 if (err)
4212                         goto out;
4213         }
4214         if (prev_status >= B43_STAT_STARTED) {
4215                 err = b43_wireless_core_start(dev);
4216                 if (err) {
4217                         b43_wireless_core_exit(dev);
4218                         goto out;
4219                 }
4220         }
4221       out:
4222         mutex_unlock(&wl->mutex);
4223         if (err)
4224                 b43err(wl, "Controller restart FAILED\n");
4225         else
4226                 b43info(wl, "Controller restarted\n");
4227 }
4228
4229 static int b43_setup_bands(struct b43_wldev *dev,
4230                            bool have_2ghz_phy, bool have_5ghz_phy)
4231 {
4232         struct ieee80211_hw *hw = dev->wl->hw;
4233
4234         if (have_2ghz_phy)
4235                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
4236         if (dev->phy.type == B43_PHYTYPE_N) {
4237                 if (have_5ghz_phy)
4238                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
4239         } else {
4240                 if (have_5ghz_phy)
4241                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
4242         }
4243
4244         dev->phy.supports_2ghz = have_2ghz_phy;
4245         dev->phy.supports_5ghz = have_5ghz_phy;
4246
4247         return 0;
4248 }
4249
4250 static void b43_wireless_core_detach(struct b43_wldev *dev)
4251 {
4252         /* We release firmware that late to not be required to re-request
4253          * is all the time when we reinit the core. */
4254         b43_release_firmware(dev);
4255 }
4256
4257 static int b43_wireless_core_attach(struct b43_wldev *dev)
4258 {
4259         struct b43_wl *wl = dev->wl;
4260         struct ssb_bus *bus = dev->dev->bus;
4261         struct pci_dev *pdev = bus->host_pci;
4262         int err;
4263         bool have_2ghz_phy = 0, have_5ghz_phy = 0;
4264         u32 tmp;
4265
4266         /* Do NOT do any device initialization here.
4267          * Do it in wireless_core_init() instead.
4268          * This function is for gathering basic information about the HW, only.
4269          * Also some structs may be set up here. But most likely you want to have
4270          * that in core_init(), too.
4271          */
4272
4273         err = ssb_bus_powerup(bus, 0);
4274         if (err) {
4275                 b43err(wl, "Bus powerup failed\n");
4276                 goto out;
4277         }
4278         /* Get the PHY type. */
4279         if (dev->dev->id.revision >= 5) {
4280                 u32 tmshigh;
4281
4282                 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
4283                 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
4284                 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
4285         } else
4286                 B43_WARN_ON(1);
4287
4288         dev->phy.gmode = have_2ghz_phy;
4289         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4290         b43_wireless_core_reset(dev, tmp);
4291
4292         err = b43_phy_versioning(dev);
4293         if (err)
4294                 goto err_powerdown;
4295         /* Check if this device supports multiband. */
4296         if (!pdev ||
4297             (pdev->device != 0x4312 &&
4298              pdev->device != 0x4319 && pdev->device != 0x4324)) {
4299                 /* No multiband support. */
4300                 have_2ghz_phy = 0;
4301                 have_5ghz_phy = 0;
4302                 switch (dev->phy.type) {
4303                 case B43_PHYTYPE_A:
4304                         have_5ghz_phy = 1;
4305                         break;
4306                 case B43_PHYTYPE_G:
4307                 case B43_PHYTYPE_N:
4308                         have_2ghz_phy = 1;
4309                         break;
4310                 default:
4311                         B43_WARN_ON(1);
4312                 }
4313         }
4314         if (dev->phy.type == B43_PHYTYPE_A) {
4315                 /* FIXME */
4316                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
4317                 err = -EOPNOTSUPP;
4318                 goto err_powerdown;
4319         }
4320         dev->phy.gmode = have_2ghz_phy;
4321         tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
4322         b43_wireless_core_reset(dev, tmp);
4323
4324         err = b43_validate_chipaccess(dev);
4325         if (err)
4326                 goto err_powerdown;
4327         err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
4328         if (err)
4329                 goto err_powerdown;
4330
4331         /* Now set some default "current_dev" */
4332         if (!wl->current_dev)
4333                 wl->current_dev = dev;
4334         INIT_WORK(&dev->restart_work, b43_chip_reset);
4335
4336         b43_radio_turn_off(dev, 1);
4337         b43_switch_analog(dev, 0);
4338         ssb_device_disable(dev->dev, 0);
4339         ssb_bus_may_powerdown(bus);
4340
4341 out:
4342         return err;
4343
4344 err_powerdown:
4345         ssb_bus_may_powerdown(bus);
4346         return err;
4347 }
4348
4349 static void b43_one_core_detach(struct ssb_device *dev)
4350 {
4351         struct b43_wldev *wldev;
4352         struct b43_wl *wl;
4353
4354         wldev = ssb_get_drvdata(dev);
4355         wl = wldev->wl;
4356         cancel_work_sync(&wldev->restart_work);
4357         b43_debugfs_remove_device(wldev);
4358         b43_wireless_core_detach(wldev);
4359         list_del(&wldev->list);
4360         wl->nr_devs--;
4361         ssb_set_drvdata(dev, NULL);
4362         kfree(wldev);
4363 }
4364
4365 static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
4366 {
4367         struct b43_wldev *wldev;
4368         struct pci_dev *pdev;
4369         int err = -ENOMEM;
4370
4371         if (!list_empty(&wl->devlist)) {
4372                 /* We are not the first core on this chip. */
4373                 pdev = dev->bus->host_pci;
4374                 /* Only special chips support more than one wireless
4375                  * core, although some of the other chips have more than
4376                  * one wireless core as well. Check for this and
4377                  * bail out early.
4378                  */
4379                 if (!pdev ||
4380                     ((pdev->device != 0x4321) &&
4381                      (pdev->device != 0x4313) && (pdev->device != 0x431A))) {
4382                         b43dbg(wl, "Ignoring unconnected 802.11 core\n");
4383                         return -ENODEV;
4384                 }
4385         }
4386
4387         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
4388         if (!wldev)
4389                 goto out;
4390
4391         wldev->dev = dev;
4392         wldev->wl = wl;
4393         b43_set_status(wldev, B43_STAT_UNINIT);
4394         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
4395         tasklet_init(&wldev->isr_tasklet,
4396                      (void (*)(unsigned long))b43_interrupt_tasklet,
4397                      (unsigned long)wldev);
4398         INIT_LIST_HEAD(&wldev->list);
4399
4400         err = b43_wireless_core_attach(wldev);
4401         if (err)
4402                 goto err_kfree_wldev;
4403
4404         list_add(&wldev->list, &wl->devlist);
4405         wl->nr_devs++;
4406         ssb_set_drvdata(dev, wldev);
4407         b43_debugfs_add_device(wldev);
4408
4409       out:
4410         return err;
4411
4412       err_kfree_wldev:
4413         kfree(wldev);
4414         return err;
4415 }
4416
4417 static void b43_sprom_fixup(struct ssb_bus *bus)
4418 {
4419         /* boardflags workarounds */
4420         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
4421             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
4422                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
4423         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
4424             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
4425                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
4426 }
4427
4428 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
4429 {
4430         struct ieee80211_hw *hw = wl->hw;
4431
4432         ssb_set_devtypedata(dev, NULL);
4433         ieee80211_free_hw(hw);
4434 }
4435
4436 static int b43_wireless_init(struct ssb_device *dev)
4437 {
4438         struct ssb_sprom *sprom = &dev->bus->sprom;
4439         struct ieee80211_hw *hw;
4440         struct b43_wl *wl;
4441         int err = -ENOMEM;
4442
4443         b43_sprom_fixup(dev->bus);
4444
4445         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
4446         if (!hw) {
4447                 b43err(NULL, "Could not allocate ieee80211 device\n");
4448                 goto out;
4449         }
4450
4451         /* fill hw info */
4452         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
4453                     IEEE80211_HW_RX_INCLUDES_FCS;
4454         hw->max_signal = 100;
4455         hw->max_rssi = -110;
4456         hw->max_noise = -110;
4457         hw->queues = b43_modparam_qos ? 4 : 1;
4458         SET_IEEE80211_DEV(hw, dev->dev);
4459         if (is_valid_ether_addr(sprom->et1mac))
4460                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
4461         else
4462                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
4463
4464         /* Get and initialize struct b43_wl */
4465         wl = hw_to_b43_wl(hw);
4466         memset(wl, 0, sizeof(*wl));
4467         wl->hw = hw;
4468         spin_lock_init(&wl->irq_lock);
4469         spin_lock_init(&wl->leds_lock);
4470         spin_lock_init(&wl->shm_lock);
4471         mutex_init(&wl->mutex);
4472         INIT_LIST_HEAD(&wl->devlist);
4473         INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
4474         INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
4475
4476         ssb_set_devtypedata(dev, wl);
4477         b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
4478         err = 0;
4479       out:
4480         return err;
4481 }
4482
4483 static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
4484 {
4485         struct b43_wl *wl;
4486         int err;
4487         int first = 0;
4488
4489         wl = ssb_get_devtypedata(dev);
4490         if (!wl) {
4491                 /* Probing the first core. Must setup common struct b43_wl */
4492                 first = 1;
4493                 err = b43_wireless_init(dev);
4494                 if (err)
4495                         goto out;
4496                 wl = ssb_get_devtypedata(dev);
4497                 B43_WARN_ON(!wl);
4498         }
4499         err = b43_one_core_attach(dev, wl);
4500         if (err)
4501                 goto err_wireless_exit;
4502
4503         if (first) {
4504                 err = ieee80211_register_hw(wl->hw);
4505                 if (err)
4506                         goto err_one_core_detach;
4507         }
4508
4509       out:
4510         return err;
4511
4512       err_one_core_detach:
4513         b43_one_core_detach(dev);
4514       err_wireless_exit:
4515         if (first)
4516                 b43_wireless_exit(dev, wl);
4517         return err;
4518 }
4519
4520 static void b43_remove(struct ssb_device *dev)
4521 {
4522         struct b43_wl *wl = ssb_get_devtypedata(dev);
4523         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4524
4525         B43_WARN_ON(!wl);
4526         if (wl->current_dev == wldev)
4527                 ieee80211_unregister_hw(wl->hw);
4528
4529         b43_one_core_detach(dev);
4530
4531         if (list_empty(&wl->devlist)) {
4532                 /* Last core on the chip unregistered.
4533                  * We can destroy common struct b43_wl.
4534                  */
4535                 b43_wireless_exit(dev, wl);
4536         }
4537 }
4538
4539 /* Perform a hardware reset. This can be called from any context. */
4540 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
4541 {
4542         /* Must avoid requeueing, if we are in shutdown. */
4543         if (b43_status(dev) < B43_STAT_INITIALIZED)
4544                 return;
4545         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
4546         queue_work(dev->wl->hw->workqueue, &dev->restart_work);
4547 }
4548
4549 #ifdef CONFIG_PM
4550
4551 static int b43_suspend(struct ssb_device *dev, pm_message_t state)
4552 {
4553         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4554         struct b43_wl *wl = wldev->wl;
4555
4556         b43dbg(wl, "Suspending...\n");
4557
4558         mutex_lock(&wl->mutex);
4559         wldev->suspend_in_progress = true;
4560         wldev->suspend_init_status = b43_status(wldev);
4561         if (wldev->suspend_init_status >= B43_STAT_STARTED)
4562                 b43_wireless_core_stop(wldev);
4563         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
4564                 b43_wireless_core_exit(wldev);
4565         mutex_unlock(&wl->mutex);
4566
4567         b43dbg(wl, "Device suspended.\n");
4568
4569         return 0;
4570 }
4571
4572 static int b43_resume(struct ssb_device *dev)
4573 {
4574         struct b43_wldev *wldev = ssb_get_drvdata(dev);
4575         struct b43_wl *wl = wldev->wl;
4576         int err = 0;
4577
4578         b43dbg(wl, "Resuming...\n");
4579
4580         mutex_lock(&wl->mutex);
4581         if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
4582                 err = b43_wireless_core_init(wldev);
4583                 if (err) {
4584                         b43err(wl, "Resume failed at core init\n");
4585                         goto out;
4586                 }
4587         }
4588         if (wldev->suspend_init_status >= B43_STAT_STARTED) {
4589                 err = b43_wireless_core_start(wldev);
4590                 if (err) {
4591                         b43_leds_exit(wldev);
4592                         b43_rng_exit(wldev->wl, true);
4593                         b43_wireless_core_exit(wldev);
4594                         b43err(wl, "Resume failed at core start\n");
4595                         goto out;
4596                 }
4597         }
4598         b43dbg(wl, "Device resumed.\n");
4599  out:
4600         wldev->suspend_in_progress = false;
4601         mutex_unlock(&wl->mutex);
4602         return err;
4603 }
4604
4605 #else /* CONFIG_PM */
4606 # define b43_suspend    NULL
4607 # define b43_resume     NULL
4608 #endif /* CONFIG_PM */
4609
4610 static struct ssb_driver b43_ssb_driver = {
4611         .name           = KBUILD_MODNAME,
4612         .id_table       = b43_ssb_tbl,
4613         .probe          = b43_probe,
4614         .remove         = b43_remove,
4615         .suspend        = b43_suspend,
4616         .resume         = b43_resume,
4617 };
4618
4619 static void b43_print_driverinfo(void)
4620 {
4621         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
4622                    *feat_leds = "", *feat_rfkill = "";
4623
4624 #ifdef CONFIG_B43_PCI_AUTOSELECT
4625         feat_pci = "P";
4626 #endif
4627 #ifdef CONFIG_B43_PCMCIA
4628         feat_pcmcia = "M";
4629 #endif
4630 #ifdef CONFIG_B43_NPHY
4631         feat_nphy = "N";
4632 #endif
4633 #ifdef CONFIG_B43_LEDS
4634         feat_leds = "L";
4635 #endif
4636 #ifdef CONFIG_B43_RFKILL
4637         feat_rfkill = "R";
4638 #endif
4639         printk(KERN_INFO "Broadcom 43xx driver loaded "
4640                "[ Features: %s%s%s%s%s, Firmware-ID: "
4641                B43_SUPPORTED_FIRMWARE_ID " ]\n",
4642                feat_pci, feat_pcmcia, feat_nphy,
4643                feat_leds, feat_rfkill);
4644 }
4645
4646 static int __init b43_init(void)
4647 {
4648         int err;
4649
4650         b43_debugfs_init();
4651         err = b43_pcmcia_init();
4652         if (err)
4653                 goto err_dfs_exit;
4654         err = ssb_driver_register(&b43_ssb_driver);
4655         if (err)
4656                 goto err_pcmcia_exit;
4657         b43_print_driverinfo();
4658
4659         return err;
4660
4661 err_pcmcia_exit:
4662         b43_pcmcia_exit();
4663 err_dfs_exit:
4664         b43_debugfs_exit();
4665         return err;
4666 }
4667
4668 static void __exit b43_exit(void)
4669 {
4670         ssb_driver_unregister(&b43_ssb_driver);
4671         b43_pcmcia_exit();
4672         b43_debugfs_exit();
4673 }
4674
4675 module_init(b43_init)
4676 module_exit(b43_exit)