err.no Git - linux-2.6/blob - drivers/media/video/saa7111.c

   1 /*
   2  * saa7111 - Philips SAA7111A video decoder driver version 0.0.3
   3  *
   4  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
   5  *
   6  * Slight changes for video timing and attachment output by
   7  * Wolfgang Scherr <scherr@net4you.net>
   8  *
   9  * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
  10  *    - moved over to linux>=2.4.x i2c protocol (1/1/2003)
  11  *
  12  * Changes by Michael Hunold <michael@mihu.de>
  13  *    - implemented DECODER_SET_GPIO, DECODER_INIT, DECODER_SET_VBI_BYPASS
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  28  */
  29
  30 #include <linux/module.h>
  31 #include <linux/init.h>
  32 #include <linux/delay.h>
  33 #include <linux/errno.h>
  34 #include <linux/fs.h>
  35 #include <linux/kernel.h>
  36 #include <linux/major.h>
  37 #include <linux/slab.h>
  38 #include <linux/mm.h>
  39 #include <linux/pci.h>
  40 #include <linux/signal.h>
  41 #include <asm/io.h>
  42 #include <asm/pgtable.h>
  43 #include <asm/page.h>
  44 #include <linux/sched.h>
  45 #include <asm/segment.h>
  46 #include <linux/types.h>
  47
  48 #include <linux/videodev.h>
  49 #include <asm/uaccess.h>
  50
  51 MODULE_DESCRIPTION("Philips SAA7111 video decoder driver");
  52 MODULE_AUTHOR("Dave Perks");
  53 MODULE_LICENSE("GPL");
  54
  55 #include <linux/i2c.h>
  56 #include <linux/i2c-dev.h>
  57
  58 #define I2C_NAME(s) (s)->name
  59
  60 #include <linux/video_decoder.h>
  61
  62 static int debug = 0;
  63 module_param(debug, int, 0644);
  64 MODULE_PARM_DESC(debug, "Debug level (0-1)");
  65
  66 #define dprintk(num, format, args...) \
  67         do { \
  68                 if (debug >= num) \
  69                         printk(format, ##args); \
  70         } while (0)
  71
  72 /* ----------------------------------------------------------------------- */
  73
  74 struct saa7111 {
  75         unsigned char reg[32];
  76
  77         int norm;
  78         int input;
  79         int enable;
  80         int bright;
  81         int contrast;
  82         int hue;
  83         int sat;
  84 };
  85
  86 #define   I2C_SAA7111        0x48
  87
  88 /* ----------------------------------------------------------------------- */
  89
  90 static inline int
  91 saa7111_write (struct i2c_client *client,
  92                u8                 reg,
  93                u8                 value)
  94 {
  95         struct saa7111 *decoder = i2c_get_clientdata(client);
  96
  97         decoder->reg[reg] = value;
  98         return i2c_smbus_write_byte_data(client, reg, value);
  99 }
 100
 101 static int
 102 saa7111_write_block (struct i2c_client *client,
 103                      const u8          *data,
 104                      unsigned int       len)
 105 {
 106         int ret = -1;
 107         u8 reg;
 108
 109         /* the saa7111 has an autoincrement function, use it if
 110          * the adapter understands raw I2C */
 111         if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 112                 /* do raw I2C, not smbus compatible */
 113                 struct saa7111 *decoder = i2c_get_clientdata(client);
 114                 struct i2c_msg msg;
 115                 u8 block_data[32];
 116
 117                 msg.addr = client->addr;
 118                 msg.flags = 0;
 119                 while (len >= 2) {
 120                         msg.buf = (char *) block_data;
 121                         msg.len = 0;
 122                         block_data[msg.len++] = reg = data[0];
 123                         do {
 124                                 block_data[msg.len++] =
 125                                     decoder->reg[reg++] = data[1];
 126                                 len -= 2;
 127                                 data += 2;
 128                         } while (len >= 2 && data[0] == reg &&
 129                                  msg.len < 32);
 130                         if ((ret = i2c_transfer(client->adapter,
 131                                                 &msg, 1)) < 0)
 132                                 break;
 133                 }
 134         } else {
 135                 /* do some slow I2C emulation kind of thing */
 136                 while (len >= 2) {
 137                         reg = *data++;
 138                         if ((ret = saa7111_write(client, reg,
 139                                                  *data++)) < 0)
 140                                 break;
 141                         len -= 2;
 142                 }
 143         }
 144
 145         return ret;
 146 }
 147
 148 static int
 149 saa7111_init_decoder (struct i2c_client *client,
 150               struct video_decoder_init *init)
 151 {
 152         return saa7111_write_block(client, init->data, init->len);
 153 }
 154
 155 static inline int
 156 saa7111_read (struct i2c_client *client,
 157               u8                 reg)
 158 {
 159         return i2c_smbus_read_byte_data(client, reg);
 160 }
 161
 162 /* ----------------------------------------------------------------------- */
 163
 164 static const unsigned char saa7111_i2c_init[] = {
 165         0x00, 0x00,             /* 00 - ID byte */
 166         0x01, 0x00,             /* 01 - reserved */
 167
 168         /*front end */
 169         0x02, 0xd0,             /* 02 - FUSE=3, GUDL=2, MODE=0 */
 170         0x03, 0x23,             /* 03 - HLNRS=0, VBSL=1, WPOFF=0,
 171                                  * HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
 172         0x04, 0x00,             /* 04 - GAI1=256 */
 173         0x05, 0x00,             /* 05 - GAI2=256 */
 174
 175         /* decoder */
 176         0x06, 0xf3,             /* 06 - HSB at  13(50Hz) /  17(60Hz)
 177                                  * pixels after end of last line */
 178         /*0x07, 0x13,     * 07 - HSS at 113(50Hz) / 117(60Hz) pixels
 179                                  * after end of last line */
 180         0x07, 0xe8,             /* 07 - HSS seems to be needed to
 181                                  * work with NTSC, too */
 182         0x08, 0xc8,             /* 08 - AUFD=1, FSEL=1, EXFIL=0,
 183                                  * VTRC=1, HPLL=0, VNOI=0 */
 184         0x09, 0x01,             /* 09 - BYPS=0, PREF=0, BPSS=0,
 185                                  * VBLB=0, UPTCV=0, APER=1 */
 186         0x0a, 0x80,             /* 0a - BRIG=128 */
 187         0x0b, 0x47,             /* 0b - CONT=1.109 */
 188         0x0c, 0x40,             /* 0c - SATN=1.0 */
 189         0x0d, 0x00,             /* 0d - HUE=0 */
 190         0x0e, 0x01,             /* 0e - CDTO=0, CSTD=0, DCCF=0,
 191                                  * FCTC=0, CHBW=1 */
 192         0x0f, 0x00,             /* 0f - reserved */
 193         0x10, 0x48,             /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
 194         0x11, 0x1c,             /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
 195                                  * OEYC=1, OEHV=1, VIPB=0, COLO=0 */
 196         0x12, 0x00,             /* 12 - output control 2 */
 197         0x13, 0x00,             /* 13 - output control 3 */
 198         0x14, 0x00,             /* 14 - reserved */
 199         0x15, 0x00,             /* 15 - VBI */
 200         0x16, 0x00,             /* 16 - VBI */
 201         0x17, 0x00,             /* 17 - VBI */
 202 };
 203
 204 static int
 205 saa7111_command (struct i2c_client *client,
 206                  unsigned int       cmd,
 207                  void              *arg)
 208 {
 209         struct saa7111 *decoder = i2c_get_clientdata(client);
 210
 211         switch (cmd) {
 212
 213         case 0:
 214         case DECODER_INIT:
 215         {
 216                 struct video_decoder_init *init = arg;
 217                 if (NULL != init)
 218                         return saa7111_init_decoder(client, init);
 219                 else {
 220                         struct video_decoder_init vdi;
 221                         vdi.data = saa7111_i2c_init;
 222                         vdi.len = sizeof(saa7111_i2c_init);
 223                         return saa7111_init_decoder(client, &vdi);
 224                 }
 225         }
 226
 227         case DECODER_DUMP:
 228         {
 229                 int i;
 230
 231                 for (i = 0; i < 32; i += 16) {
 232                         int j;
 233
 234                         printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i);
 235                         for (j = 0; j < 16; ++j) {
 236                                 printk(" %02x",
 237                                        saa7111_read(client, i + j));
 238                         }
 239                         printk("\n");
 240                 }
 241         }
 242                 break;
 243
 244         case DECODER_GET_CAPABILITIES:
 245         {
 246                 struct video_decoder_capability *cap = arg;
 247
 248                 cap->flags = VIDEO_DECODER_PAL |
 249                              VIDEO_DECODER_NTSC |
 250                              VIDEO_DECODER_SECAM |
 251                              VIDEO_DECODER_AUTO |
 252                              VIDEO_DECODER_CCIR;
 253                 cap->inputs = 8;
 254                 cap->outputs = 1;
 255         }
 256                 break;
 257
 258         case DECODER_GET_STATUS:
 259         {
 260                 int *iarg = arg;
 261                 int status;
 262                 int res;
 263
 264                 status = saa7111_read(client, 0x1f);
 265                 dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client),
 266                         status);
 267                 res = 0;
 268                 if ((status & (1 << 6)) == 0) {
 269                         res |= DECODER_STATUS_GOOD;
 270                 }
 271                 switch (decoder->norm) {
 272                 case VIDEO_MODE_NTSC:
 273                         res |= DECODER_STATUS_NTSC;
 274                         break;
 275                 case VIDEO_MODE_PAL:
 276                         res |= DECODER_STATUS_PAL;
 277                         break;
 278                 case VIDEO_MODE_SECAM:
 279                         res |= DECODER_STATUS_SECAM;
 280                         break;
 281                 default:
 282                 case VIDEO_MODE_AUTO:
 283                         if ((status & (1 << 5)) != 0) {
 284                                 res |= DECODER_STATUS_NTSC;
 285                         } else {
 286                                 res |= DECODER_STATUS_PAL;
 287                         }
 288                         break;
 289                 }
 290                 if ((status & (1 << 0)) != 0) {
 291                         res |= DECODER_STATUS_COLOR;
 292                 }
 293                 *iarg = res;
 294         }
 295                 break;
 296
 297         case DECODER_SET_GPIO:
 298         {
 299                 int *iarg = arg;
 300                 if (0 != *iarg) {
 301                         saa7111_write(client, 0x11,
 302                                 (decoder->reg[0x11] | 0x80));
 303                 } else {
 304                         saa7111_write(client, 0x11,
 305                                 (decoder->reg[0x11] & 0x7f));
 306                 }
 307                 break;
 308         }
 309
 310         case DECODER_SET_VBI_BYPASS:
 311         {
 312                 int *iarg = arg;
 313                 if (0 != *iarg) {
 314                         saa7111_write(client, 0x13,
 315                                 (decoder->reg[0x13] & 0xf0) | 0x0a);
 316                 } else {
 317                         saa7111_write(client, 0x13,
 318                                 (decoder->reg[0x13] & 0xf0));
 319                 }
 320                 break;
 321         }
 322
 323         case DECODER_SET_NORM:
 324         {
 325                 int *iarg = arg;
 326
 327                 switch (*iarg) {
 328
 329                 case VIDEO_MODE_NTSC:
 330                         saa7111_write(client, 0x08,
 331                                       (decoder->reg[0x08] & 0x3f) | 0x40);
 332                         saa7111_write(client, 0x0e,
 333                                       (decoder->reg[0x0e] & 0x8f));
 334                         break;
 335
 336                 case VIDEO_MODE_PAL:
 337                         saa7111_write(client, 0x08,
 338                                       (decoder->reg[0x08] & 0x3f) | 0x00);
 339                         saa7111_write(client, 0x0e,
 340                                       (decoder->reg[0x0e] & 0x8f));
 341                         break;
 342
 343                 case VIDEO_MODE_SECAM:
 344                         saa7111_write(client, 0x08,
 345                                       (decoder->reg[0x08] & 0x3f) | 0x00);
 346                         saa7111_write(client, 0x0e,
 347                                       (decoder->reg[0x0e] & 0x8f) | 0x50);
 348                         break;
 349
 350                 case VIDEO_MODE_AUTO:
 351                         saa7111_write(client, 0x08,
 352                                       (decoder->reg[0x08] & 0x3f) | 0x80);
 353                         saa7111_write(client, 0x0e,
 354                                       (decoder->reg[0x0e] & 0x8f));
 355                         break;
 356
 357                 default:
 358                         return -EINVAL;
 359
 360                 }
 361                 decoder->norm = *iarg;
 362         }
 363                 break;
 364
 365         case DECODER_SET_INPUT:
 366         {
 367                 int *iarg = arg;
 368
 369                 if (*iarg < 0 || *iarg > 7) {
 370                         return -EINVAL;
 371                 }
 372
 373                 if (decoder->input != *iarg) {
 374                         decoder->input = *iarg;
 375                         /* select mode */
 376                         saa7111_write(client, 0x02,
 377                                       (decoder->
 378                                        reg[0x02] & 0xf8) | decoder->input);
 379                         /* bypass chrominance trap for modes 4..7 */
 380                         saa7111_write(client, 0x09,
 381                                       (decoder->
 382                                        reg[0x09] & 0x7f) | ((decoder->
 383                                                              input >
 384                                                              3) ? 0x80 :
 385                                                             0));
 386                 }
 387         }
 388                 break;
 389
 390         case DECODER_SET_OUTPUT:
 391         {
 392                 int *iarg = arg;
 393
 394                 /* not much choice of outputs */
 395                 if (*iarg != 0) {
 396                         return -EINVAL;
 397                 }
 398         }
 399                 break;
 400
 401         case DECODER_ENABLE_OUTPUT:
 402         {
 403                 int *iarg = arg;
 404                 int enable = (*iarg != 0);
 405
 406                 if (decoder->enable != enable) {
 407                         decoder->enable = enable;
 408
 409                         /* RJ: If output should be disabled (for
 410                          * playing videos), we also need a open PLL.
 411                          * The input is set to 0 (where no input
 412                          * source is connected), although this
 413                          * is not necessary.
 414                          *
 415                          * If output should be enabled, we have to
 416                          * reverse the above.
 417                          */
 418
 419                         if (decoder->enable) {
 420                                 saa7111_write(client, 0x02,
 421                                               (decoder->
 422                                                reg[0x02] & 0xf8) |
 423                                               decoder->input);
 424                                 saa7111_write(client, 0x08,
 425                                               (decoder->reg[0x08] & 0xfb));
 426                                 saa7111_write(client, 0x11,
 427                                               (decoder->
 428                                                reg[0x11] & 0xf3) | 0x0c);
 429                         } else {
 430                                 saa7111_write(client, 0x02,
 431                                               (decoder->reg[0x02] & 0xf8));
 432                                 saa7111_write(client, 0x08,
 433                                               (decoder->
 434                                                reg[0x08] & 0xfb) | 0x04);
 435                                 saa7111_write(client, 0x11,
 436                                               (decoder->reg[0x11] & 0xf3));
 437                         }
 438                 }
 439         }
 440                 break;
 441
 442         case DECODER_SET_PICTURE:
 443         {
 444                 struct video_picture *pic = arg;
 445
 446                 if (decoder->bright != pic->brightness) {
 447                         /* We want 0 to 255 we get 0-65535 */
 448                         decoder->bright = pic->brightness;
 449                         saa7111_write(client, 0x0a, decoder->bright >> 8);
 450                 }
 451                 if (decoder->contrast != pic->contrast) {
 452                         /* We want 0 to 127 we get 0-65535 */
 453                         decoder->contrast = pic->contrast;
 454                         saa7111_write(client, 0x0b,
 455                                       decoder->contrast >> 9);
 456                 }
 457                 if (decoder->sat != pic->colour) {
 458                         /* We want 0 to 127 we get 0-65535 */
 459                         decoder->sat = pic->colour;
 460                         saa7111_write(client, 0x0c, decoder->sat >> 9);
 461                 }
 462                 if (decoder->hue != pic->hue) {
 463                         /* We want -128 to 127 we get 0-65535 */
 464                         decoder->hue = pic->hue;
 465                         saa7111_write(client, 0x0d,
 466                                       (decoder->hue - 32768) >> 8);
 467                 }
 468         }
 469                 break;
 470
 471         default:
 472                 return -EINVAL;
 473         }
 474
 475         return 0;
 476 }
 477
 478 /* ----------------------------------------------------------------------- */
 479
 480 /*
 481  * Generic i2c probe
 482  * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
 483  */
 484 static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END };
 485
 486 static unsigned short ignore = I2C_CLIENT_END;
 487
 488 static struct i2c_client_address_data addr_data = {
 489         .normal_i2c             = normal_i2c,
 490         .probe                  = &ignore,
 491         .ignore                 = &ignore,
 492         .force                  = &ignore,
 493 };
 494
 495 static struct i2c_driver i2c_driver_saa7111;
 496
 497 static int
 498 saa7111_detect_client (struct i2c_adapter *adapter,
 499                        int                 address,
 500                        int                 kind)
 501 {
 502         int i;
 503         struct i2c_client *client;
 504         struct saa7111 *decoder;
 505         struct video_decoder_init vdi;
 506
 507         dprintk(1,
 508                 KERN_INFO
 509                 "saa7111.c: detecting saa7111 client on address 0x%x\n",
 510                 address << 1);
 511
 512         /* Check if the adapter supports the needed features */
 513         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 514                 return 0;
 515
 516         client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
 517         if (client == 0)
 518                 return -ENOMEM;
 519         memset(client, 0, sizeof(struct i2c_client));
 520         client->addr = address;
 521         client->adapter = adapter;
 522         client->driver = &i2c_driver_saa7111;
 523         client->flags = I2C_CLIENT_ALLOW_USE;
 524         strlcpy(I2C_NAME(client), "saa7111", sizeof(I2C_NAME(client)));
 525
 526         decoder = kmalloc(sizeof(struct saa7111), GFP_KERNEL);
 527         if (decoder == NULL) {
 528                 kfree(client);
 529                 return -ENOMEM;
 530         }
 531         memset(decoder, 0, sizeof(struct saa7111));
 532         decoder->norm = VIDEO_MODE_NTSC;
 533         decoder->input = 0;
 534         decoder->enable = 1;
 535         decoder->bright = 32768;
 536         decoder->contrast = 32768;
 537         decoder->hue = 32768;
 538         decoder->sat = 32768;
 539         i2c_set_clientdata(client, decoder);
 540
 541         i = i2c_attach_client(client);
 542         if (i) {
 543                 kfree(client);
 544                 kfree(decoder);
 545                 return i;
 546         }
 547
 548         vdi.data = saa7111_i2c_init;
 549         vdi.len = sizeof(saa7111_i2c_init);
 550         i = saa7111_init_decoder(client, &vdi);
 551         if (i < 0) {
 552                 dprintk(1, KERN_ERR "%s_attach error: init status %d\n",
 553                         I2C_NAME(client), i);
 554         } else {
 555                 dprintk(1,
 556                         KERN_INFO
 557                         "%s_attach: chip version %x at address 0x%x\n",
 558                         I2C_NAME(client), saa7111_read(client, 0x00) >> 4,
 559                         client->addr << 1);
 560         }
 561
 562         return 0;
 563 }
 564
 565 static int
 566 saa7111_attach_adapter (struct i2c_adapter *adapter)
 567 {
 568         dprintk(1,
 569                 KERN_INFO
 570                 "saa7111.c: starting probe for adapter %s (0x%x)\n",
 571                 I2C_NAME(adapter), adapter->id);
 572         return i2c_probe(adapter, &addr_data, &saa7111_detect_client);
 573 }
 574
 575 static int
 576 saa7111_detach_client (struct i2c_client *client)
 577 {
 578         struct saa7111 *decoder = i2c_get_clientdata(client);
 579         int err;
 580
 581         err = i2c_detach_client(client);
 582         if (err) {
 583                 return err;
 584         }
 585
 586         kfree(decoder);
 587         kfree(client);
 588
 589         return 0;
 590 }
 591
 592 /* ----------------------------------------------------------------------- */
 593
 594 static struct i2c_driver i2c_driver_saa7111 = {
 595         .owner = THIS_MODULE,
 596         .name = "saa7111",
 597
 598         .id = I2C_DRIVERID_SAA7111A,
 599         .flags = I2C_DF_NOTIFY,
 600
 601         .attach_adapter = saa7111_attach_adapter,
 602         .detach_client = saa7111_detach_client,
 603         .command = saa7111_command,
 604 };
 605
 606 static int __init
 607 saa7111_init (void)
 608 {
 609         return i2c_add_driver(&i2c_driver_saa7111);
 610 }
 611
 612 static void __exit
 613 saa7111_exit (void)
 614 {
 615         i2c_del_driver(&i2c_driver_saa7111);
 616 }
 617
 618 module_init(saa7111_init);
 619 module_exit(saa7111_exit);