2 * programming the msp34* sound processor family
4 * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org>
6 * what works and what doesn't:
9 * Support for Hauppauge cards added (decoding handled by tuner) added by
10 * Frederic Crozat <fcrozat@mail.dotcom.fr>
13 * should work. The stereo modes are backward compatible to FM-mono,
14 * therefore FM-Mono should be allways available.
16 * FM-Stereo (B/G, used in germany)
17 * should work, with autodetect
19 * FM-Stereo (satellite)
20 * should work, no autodetect (i.e. default is mono, but you can
21 * switch to stereo -- untested)
23 * NICAM (B/G, L , used in UK, Scandinavia, Spain and France)
24 * should work, with autodetect. Support for NICAM was added by
25 * Pekka Pietikainen <pp@netppl.fi>
29 * - better SAT support
32 * 980623 Thomas Sailer (sailer@ife.ee.ethz.ch)
33 * using soundcore instead of OSS
37 #include <linux/config.h>
38 #include <linux/module.h>
39 #include <linux/moduleparam.h>
40 #include <linux/kernel.h>
41 #include <linux/sched.h>
42 #include <linux/string.h>
43 #include <linux/timer.h>
44 #include <linux/delay.h>
45 #include <linux/errno.h>
46 #include <linux/slab.h>
47 #include <linux/i2c.h>
48 #include <linux/videodev.h>
49 #include <linux/init.h>
50 #include <linux/smp_lock.h>
51 #include <linux/kthread.h>
52 #include <linux/suspend.h>
53 #include <asm/semaphore.h>
54 #include <asm/pgtable.h>
56 #include <media/audiochip.h>
60 #define OPMODE_AUTO -1
61 #define OPMODE_MANUAL 0
62 #define OPMODE_SIMPLE 1 /* use short programming (>= msp3410 only) */
63 #define OPMODE_SIMPLER 2 /* use shorter programming (>= msp34xxG) */
65 /* insmod parameters */
66 static int opmode = OPMODE_AUTO;
67 static int debug = 0; /* debug output */
68 static int once = 0; /* no continous stereo monitoring */
69 static int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
70 the autoscan seems work well only with FM... */
71 static int standard = 1; /* Override auto detect of audio standard, if needed. */
74 static int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
75 (msp34xxg only) 0x00a0-0x03c0 */
85 int main, second; /* sound carrier */
87 int source; /* see msp34xxg_set_source */
98 struct task_struct *kthread;
104 #define HAVE_NICAM(msp) (((msp->rev2>>8) & 0xff) != 00)
105 #define HAVE_SIMPLE(msp) ((msp->rev1 & 0xff) >= 'D'-'@')
106 #define HAVE_SIMPLER(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
107 #define HAVE_RADIO(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
109 #define VIDEO_MODE_RADIO 16 /* norm magic for radio mode */
111 /* ---------------------------------------------------------------------- */
113 #define dprintk if (debug >= 1) printk
114 #define d2printk if (debug >= 2) printk
117 module_param(opmode, int, 0444);
120 module_param(once, int, 0644);
121 module_param(debug, int, 0644);
122 module_param(stereo_threshold, int, 0644);
123 module_param(standard, int, 0644);
124 module_param(amsound, int, 0644);
125 module_param(dolby, int, 0644);
127 MODULE_PARM_DESC(once, "No continuous stereo monitoring");
128 MODULE_PARM_DESC(debug, "Enable debug messages");
129 MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
130 MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
132 MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
133 MODULE_AUTHOR("Gerd Knorr");
134 MODULE_LICENSE("Dual BSD/GPL"); /* FreeBSD uses this too */
136 /* ---------------------------------------------------------------------- */
138 #define I2C_MSP3400C 0x80
139 #define I2C_MSP3400C_ALT 0x88
141 #define I2C_MSP3400C_DEM 0x10
142 #define I2C_MSP3400C_DFP 0x12
144 /* Addresses to scan */
145 static unsigned short normal_i2c[] = {
147 I2C_MSP3400C_ALT >> 1,
152 /* ----------------------------------------------------------------------- */
153 /* functions for talking to the MSP3400C Sound processor */
155 static int msp3400c_reset(struct i2c_client *client)
157 /* reset and read revision code */
158 static char reset_off[3] = { 0x00, 0x80, 0x00 };
159 static char reset_on[3] = { 0x00, 0x00, 0x00 };
160 static char write[3] = { I2C_MSP3400C_DFP + 1, 0x00, 0x1e };
162 struct i2c_msg reset[2] = {
163 { client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
164 { client->addr, I2C_M_IGNORE_NAK, 3, reset_on },
166 struct i2c_msg test[2] = {
167 { client->addr, 0, 3, write },
168 { client->addr, I2C_M_RD, 2, read },
171 if ( (1 != i2c_transfer(client->adapter,&reset[0],1)) ||
172 (1 != i2c_transfer(client->adapter,&reset[1],1)) ||
173 (2 != i2c_transfer(client->adapter,test,2)) ) {
174 printk(KERN_ERR "msp3400: chip reset failed\n");
181 msp3400c_read(struct i2c_client *client, int dev, int addr)
185 unsigned char write[3];
186 unsigned char read[2];
187 struct i2c_msg msgs[2] = {
188 { client->addr, 0, 3, write },
189 { client->addr, I2C_M_RD, 2, read }
192 write[1] = addr >> 8;
193 write[2] = addr & 0xff;
195 for (err = 0; err < 3;) {
196 if (2 == i2c_transfer(client->adapter,msgs,2))
199 printk(KERN_WARNING "msp34xx: I/O error #%d (read 0x%02x/0x%02x)\n",
204 printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n");
205 msp3400c_reset(client);
208 return read[0] << 8 | read[1];
212 msp3400c_write(struct i2c_client *client, int dev, int addr, int val)
215 unsigned char buffer[5];
218 buffer[1] = addr >> 8;
219 buffer[2] = addr & 0xff;
220 buffer[3] = val >> 8;
221 buffer[4] = val & 0xff;
223 for (err = 0; err < 3;) {
224 if (5 == i2c_master_send(client, buffer, 5))
227 printk(KERN_WARNING "msp34xx: I/O error #%d (write 0x%02x/0x%02x)\n",
232 printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n");
233 msp3400c_reset(client);
239 /* ------------------------------------------------------------------------ */
241 /* This macro is allowed for *constants* only, gcc must calculate it
242 at compile time. Remember -- no floats in kernel mode */
243 #define MSP_CARRIER(freq) ((int)((float)(freq/18.432)*(1<<24)))
245 #define MSP_MODE_AM_DETECT 0
246 #define MSP_MODE_FM_RADIO 2
247 #define MSP_MODE_FM_TERRA 3
248 #define MSP_MODE_FM_SAT 4
249 #define MSP_MODE_FM_NICAM1 5
250 #define MSP_MODE_FM_NICAM2 6
251 #define MSP_MODE_AM_NICAM 7
252 #define MSP_MODE_BTSC 8
253 #define MSP_MODE_EXTERN 9
255 static struct MSP_INIT_DATA_DEM {
264 } msp_init_data[] = {
265 /* AM (for carrier detect / msp3400) */
266 { { 75, 19, 36, 35, 39, 40 }, { 75, 19, 36, 35, 39, 40 },
267 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
268 0x00d0, 0x0500, 0x0020, 0x3000},
270 /* AM (for carrier detect / msp3410) */
271 { { -1, -1, -8, 2, 59, 126 }, { -1, -1, -8, 2, 59, 126 },
272 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
273 0x00d0, 0x0100, 0x0020, 0x3000},
276 { { -8, -8, 4, 6, 78, 107 }, { -8, -8, 4, 6, 78, 107 },
277 MSP_CARRIER(10.7), MSP_CARRIER(10.7),
278 0x00d0, 0x0480, 0x0020, 0x3000 },
280 /* Terrestial FM-mono + FM-stereo */
281 { { 3, 18, 27, 48, 66, 72 }, { 3, 18, 27, 48, 66, 72 },
282 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
283 0x00d0, 0x0480, 0x0030, 0x3000},
286 { { 1, 9, 14, 24, 33, 37 }, { 3, 18, 27, 48, 66, 72 },
287 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
288 0x00c6, 0x0480, 0x0000, 0x3000},
290 /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */
291 { { -2, -8, -10, 10, 50, 86 }, { 3, 18, 27, 48, 66, 72 },
292 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
293 0x00d0, 0x0040, 0x0120, 0x3000},
295 /* NICAM/FM -- I (6.0/6.552) */
296 { { 2, 4, -6, -4, 40, 94 }, { 3, 18, 27, 48, 66, 72 },
297 MSP_CARRIER(6.0), MSP_CARRIER(6.0),
298 0x00d0, 0x0040, 0x0120, 0x3000},
300 /* NICAM/AM -- L (6.5/5.85) */
301 { { -2, -8, -10, 10, 50, 86 }, { -4, -12, -9, 23, 79, 126 },
302 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
303 0x00c6, 0x0140, 0x0120, 0x7c03},
306 struct CARRIER_DETECT {
311 static struct CARRIER_DETECT carrier_detect_main[] = {
313 { MSP_CARRIER(4.5), "4.5 NTSC" },
314 { MSP_CARRIER(5.5), "5.5 PAL B/G" },
315 { MSP_CARRIER(6.0), "6.0 PAL I" },
316 { MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" }
319 static struct CARRIER_DETECT carrier_detect_55[] = {
321 { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" },
322 { MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" }
325 static struct CARRIER_DETECT carrier_detect_65[] = {
326 /* PAL SAT / SECAM */
327 { MSP_CARRIER(5.85), "5.85 PAL D/K + SECAM NICAM" },
328 { MSP_CARRIER(6.2578125), "6.25 PAL D/K1 FM-stereo" },
329 { MSP_CARRIER(6.7421875), "6.74 PAL D/K2 FM-stereo" },
330 { MSP_CARRIER(7.02), "7.02 PAL SAT FM-stereo s/b" },
331 { MSP_CARRIER(7.20), "7.20 PAL SAT FM-stereo s" },
332 { MSP_CARRIER(7.38), "7.38 PAL SAT FM-stereo b" },
335 #define CARRIER_COUNT(x) (sizeof(x)/sizeof(struct CARRIER_DETECT))
337 /* ----------------------------------------------------------------------- */
339 static int scarts[3][9] = {
340 /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */
341 { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 },
342 { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 },
343 { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 },
346 static char *scart_names[] = {
347 "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute"
351 msp3400c_set_scart(struct i2c_client *client, int in, int out)
353 struct msp3400c *msp = i2c_get_clientdata(client);
355 if (-1 == scarts[out][in])
359 "msp34xx: scart switch: %s => %d\n",scart_names[in],out);
360 msp->acb &= ~scarts[out][SCART_MASK];
361 msp->acb |= scarts[out][in];
362 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0013, msp->acb);
365 /* ------------------------------------------------------------------------ */
367 static void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2)
369 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0093, cdo1 & 0xfff);
370 msp3400c_write(client,I2C_MSP3400C_DEM, 0x009b, cdo1 >> 12);
371 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00a3, cdo2 & 0xfff);
372 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00ab, cdo2 >> 12);
373 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0056, 0); /*LOAD_REG_1/2*/
376 static void msp3400c_setvolume(struct i2c_client *client,
377 int muted, int volume, int balance)
379 int val = 0, bal = 0;
382 /* 0x7f instead if 0x73 here has sound quality issues,
383 * probably due to overmodulation + clipping ... */
384 val = (volume * 0x73 / 65535) << 8;
387 bal = (balance / 256) - 128;
390 "msp34xx: setvolume: mute=%s %d:%d v=0x%02x b=0x%02x\n",
391 muted ? "on" : "off", volume, balance, val>>8, bal);
392 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0000, val); /* loudspeaker */
393 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0006, val); /* headphones */
394 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0007,
395 muted ? 0x01 : (val | 0x01));
396 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0001, bal << 8);
399 static void msp3400c_setbass(struct i2c_client *client, int bass)
401 int val = ((bass-32768) * 0x60 / 65535) << 8;
403 dprintk(KERN_DEBUG "msp34xx: setbass: %d 0x%02x\n",bass, val>>8);
404 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0002, val); /* loudspeaker */
407 static void msp3400c_settreble(struct i2c_client *client, int treble)
409 int val = ((treble-32768) * 0x60 / 65535) << 8;
411 dprintk(KERN_DEBUG "msp34xx: settreble: %d 0x%02x\n",treble, val>>8);
412 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0003, val); /* loudspeaker */
415 static void msp3400c_setmode(struct i2c_client *client, int type)
417 struct msp3400c *msp = i2c_get_clientdata(client);
420 dprintk(KERN_DEBUG "msp3400: setmode: %d\n",type);
422 msp->audmode = V4L2_TUNER_MODE_MONO;
423 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
425 msp3400c_write(client,I2C_MSP3400C_DEM, 0x00bb, /* ad_cv */
426 msp_init_data[type].ad_cv);
428 for (i = 5; i >= 0; i--) /* fir 1 */
429 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0001,
430 msp_init_data[type].fir1[i]);
432 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0004); /* fir 2 */
433 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0040);
434 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0000);
435 for (i = 5; i >= 0; i--)
436 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005,
437 msp_init_data[type].fir2[i]);
439 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0083, /* MODE_REG */
440 msp_init_data[type].mode_reg);
442 msp3400c_setcarrier(client, msp_init_data[type].cdo1,
443 msp_init_data[type].cdo2);
445 msp3400c_write(client,I2C_MSP3400C_DEM, 0x0056, 0); /*LOAD_REG_1/2*/
448 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,
450 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,
452 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,
453 msp_init_data[type].dfp_src);
455 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,
456 msp_init_data[type].dfp_src);
457 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,
458 msp_init_data[type].dfp_src);
459 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,
460 msp_init_data[type].dfp_src);
462 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,
463 msp_init_data[type].dfp_src);
464 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e,
465 msp_init_data[type].dfp_matrix);
467 if (HAVE_NICAM(msp)) {
469 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0010, 0x5a00); /* was: 0x3000 */
473 static int best_audio_mode(int rxsubchans)
475 if (rxsubchans & V4L2_TUNER_SUB_STEREO)
476 return V4L2_TUNER_MODE_STEREO;
477 if (rxsubchans & V4L2_TUNER_SUB_LANG1)
478 return V4L2_TUNER_MODE_LANG1;
479 if (rxsubchans & V4L2_TUNER_SUB_LANG2)
480 return V4L2_TUNER_MODE_LANG2;
481 return V4L2_TUNER_MODE_MONO;
484 /* turn on/off nicam + stereo */
485 static void msp3400c_set_audmode(struct i2c_client *client, int audmode)
487 static char *strmode[16] = {
489 [ 0 ... 15 ] = "invalid",
491 [ V4L2_TUNER_MODE_MONO ] = "mono",
492 [ V4L2_TUNER_MODE_STEREO ] = "stereo",
493 [ V4L2_TUNER_MODE_LANG1 ] = "lang1",
494 [ V4L2_TUNER_MODE_LANG2 ] = "lang2",
496 struct msp3400c *msp = i2c_get_clientdata(client);
497 int nicam=0; /* channel source: FM/AM or nicam */
500 BUG_ON(msp->opmode == OPMODE_SIMPLER);
501 msp->audmode = audmode;
503 /* switch demodulator */
505 case MSP_MODE_FM_TERRA:
506 dprintk(KERN_DEBUG "msp3400: FM setstereo: %s\n",
508 msp3400c_setcarrier(client,msp->second,msp->main);
510 case V4L2_TUNER_MODE_STEREO:
511 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3001);
513 case V4L2_TUNER_MODE_MONO:
514 case V4L2_TUNER_MODE_LANG1:
515 case V4L2_TUNER_MODE_LANG2:
516 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3000);
520 case MSP_MODE_FM_SAT:
521 dprintk(KERN_DEBUG "msp3400: SAT setstereo: %s\n",
524 case V4L2_TUNER_MODE_MONO:
525 msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
527 case V4L2_TUNER_MODE_STEREO:
528 msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
530 case V4L2_TUNER_MODE_LANG1:
531 msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
533 case V4L2_TUNER_MODE_LANG2:
534 msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
538 case MSP_MODE_FM_NICAM1:
539 case MSP_MODE_FM_NICAM2:
540 case MSP_MODE_AM_NICAM:
541 dprintk(KERN_DEBUG "msp3400: NICAM setstereo: %s\n",
543 msp3400c_setcarrier(client,msp->second,msp->main);
548 dprintk(KERN_DEBUG "msp3400: BTSC setstereo: %s\n",
552 case MSP_MODE_EXTERN:
553 dprintk(KERN_DEBUG "msp3400: extern setstereo: %s\n",
557 case MSP_MODE_FM_RADIO:
558 dprintk(KERN_DEBUG "msp3400: FM-Radio setstereo: %s\n",
562 dprintk(KERN_DEBUG "msp3400: mono setstereo\n");
568 case V4L2_TUNER_MODE_STEREO:
569 src = 0x0020 | nicam;
571 case V4L2_TUNER_MODE_MONO:
572 if (msp->mode == MSP_MODE_AM_NICAM) {
573 dprintk("msp3400: switching to AM mono\n");
574 /* AM mono decoding is handled by tuner, not MSP chip */
575 /* SCART switching control register */
576 msp3400c_set_scart(client,SCART_MONO,0);
580 case V4L2_TUNER_MODE_LANG1:
581 src = 0x0000 | nicam;
583 case V4L2_TUNER_MODE_LANG2:
584 src = 0x0010 | nicam;
588 "msp3400: setstereo final source/matrix = 0x%x\n", src);
591 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,0x0520);
592 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,0x0620);
593 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,src);
594 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,src);
596 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,src);
597 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0009,src);
598 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000a,src);
599 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000b,src);
604 msp3400c_print_mode(struct msp3400c *msp)
606 if (msp->main == msp->second) {
607 printk(KERN_DEBUG "msp3400: mono sound carrier: %d.%03d MHz\n",
608 msp->main/910000,(msp->main/910)%1000);
610 printk(KERN_DEBUG "msp3400: main sound carrier: %d.%03d MHz\n",
611 msp->main/910000,(msp->main/910)%1000);
613 if (msp->mode == MSP_MODE_FM_NICAM1 ||
614 msp->mode == MSP_MODE_FM_NICAM2)
615 printk(KERN_DEBUG "msp3400: NICAM/FM carrier : %d.%03d MHz\n",
616 msp->second/910000,(msp->second/910)%1000);
617 if (msp->mode == MSP_MODE_AM_NICAM)
618 printk(KERN_DEBUG "msp3400: NICAM/AM carrier : %d.%03d MHz\n",
619 msp->second/910000,(msp->second/910)%1000);
620 if (msp->mode == MSP_MODE_FM_TERRA &&
621 msp->main != msp->second) {
622 printk(KERN_DEBUG "msp3400: FM-stereo carrier : %d.%03d MHz\n",
623 msp->second/910000,(msp->second/910)%1000);
627 /* ----------------------------------------------------------------------- */
629 struct REGISTER_DUMP {
635 autodetect_stereo(struct i2c_client *client)
637 struct msp3400c *msp = i2c_get_clientdata(client);
639 int rxsubchans = msp->rxsubchans;
640 int newnicam = msp->nicam_on;
644 case MSP_MODE_FM_TERRA:
645 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x18);
649 "msp34xx: stereo detect register: %d\n",val);
651 rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
652 } else if (val < -4096) {
653 rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
655 rxsubchans = V4L2_TUNER_SUB_MONO;
659 case MSP_MODE_FM_NICAM1:
660 case MSP_MODE_FM_NICAM2:
661 case MSP_MODE_AM_NICAM:
662 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x23);
664 "msp34xx: nicam sync=%d, mode=%d\n",
665 val & 1, (val & 0x1e) >> 1);
669 switch ((val & 0x1e) >> 1) {
672 rxsubchans = V4L2_TUNER_SUB_STEREO;
676 rxsubchans = V4L2_TUNER_SUB_MONO
677 | V4L2_TUNER_SUB_LANG1;
681 rxsubchans = V4L2_TUNER_SUB_MONO
682 | V4L2_TUNER_SUB_LANG1
683 | V4L2_TUNER_SUB_LANG2;
686 rxsubchans = V4L2_TUNER_SUB_MONO;
692 rxsubchans = V4L2_TUNER_SUB_MONO;
696 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x200);
698 "msp3410: status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
700 (val & 0x0002) ? "no" : "yes",
701 (val & 0x0004) ? "no" : "yes",
702 (val & 0x0040) ? "stereo" : "mono",
703 (val & 0x0080) ? ", nicam 2nd mono" : "",
704 (val & 0x0100) ? ", bilingual/SAP" : "");
705 rxsubchans = V4L2_TUNER_SUB_MONO;
706 if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO;
707 if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1;
710 if (rxsubchans != msp->rxsubchans) {
712 dprintk(KERN_DEBUG "msp34xx: watch: rxsubchans %d => %d\n",
713 msp->rxsubchans,rxsubchans);
714 msp->rxsubchans = rxsubchans;
716 if (newnicam != msp->nicam_on) {
718 dprintk(KERN_DEBUG "msp34xx: watch: nicam %d => %d\n",
719 msp->nicam_on,newnicam);
720 msp->nicam_on = newnicam;
726 * A kernel thread for msp3400 control -- we don't want to block the
727 * in the ioctl while doing the sound carrier & stereo detect
730 static int msp34xx_sleep(struct msp3400c *msp, int timeout)
732 DECLARE_WAITQUEUE(wait, current);
734 add_wait_queue(&msp->wq, &wait);
735 if (!kthread_should_stop()) {
737 set_current_state(TASK_INTERRUPTIBLE);
740 set_current_state(TASK_INTERRUPTIBLE);
741 schedule_timeout(msecs_to_jiffies(timeout));
744 if (current->flags & PF_FREEZE) {
748 remove_wait_queue(&msp->wq, &wait);
752 /* stereo/multilang monitoring */
753 static void watch_stereo(struct i2c_client *client)
755 struct msp3400c *msp = i2c_get_clientdata(client);
757 if (autodetect_stereo(client))
758 msp3400c_set_audmode(client,best_audio_mode(msp->rxsubchans));
760 msp->watch_stereo = 0;
763 static int msp3400c_thread(void *data)
765 struct i2c_client *client = data;
766 struct msp3400c *msp = i2c_get_clientdata(client);
767 struct CARRIER_DETECT *cd;
768 int count, max1,max2,val1,val2, val,this;
770 printk("msp3400: kthread started\n");
772 d2printk("msp3400: thread: sleep\n");
773 msp34xx_sleep(msp,-1);
774 d2printk("msp3400: thread: wakeup\n");
777 dprintk("msp3410: thread: restart scan\n");
779 if (kthread_should_stop())
782 if (VIDEO_MODE_RADIO == msp->norm ||
783 MSP_MODE_EXTERN == msp->mode) {
784 /* no carrier scan, just unmute */
785 printk("msp3400: thread: no carrier scan\n");
786 msp3400c_setvolume(client, msp->muted,
787 msp->volume, msp->balance);
792 msp3400c_setvolume(client, msp->muted, 0, 0);
793 msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ );
796 msp->watch_stereo = 0;
798 /* some time for the tuner to sync */
799 if (msp34xx_sleep(msp,200))
802 /* carrier detect pass #1 -- main carrier */
803 cd = carrier_detect_main; count = CARRIER_COUNT(carrier_detect_main);
805 if (amsound && (msp->norm == VIDEO_MODE_SECAM)) {
806 /* autodetect doesn't work well with AM ... */
809 dprintk("msp3400: AM sound override\n");
812 for (this = 0; this < count; this++) {
813 msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
814 if (msp34xx_sleep(msp,100))
816 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
820 val1 = val, max1 = this;
821 dprintk("msp3400: carrier1 val: %5d / %s\n", val,cd[this].name);
824 /* carrier detect pass #2 -- second (stereo) carrier */
827 cd = carrier_detect_55;
828 count = CARRIER_COUNT(carrier_detect_55);
831 cd = carrier_detect_65;
832 count = CARRIER_COUNT(carrier_detect_65);
837 cd = NULL; count = 0;
841 if (amsound && (msp->norm == VIDEO_MODE_SECAM)) {
842 /* autodetect doesn't work well with AM ... */
843 cd = NULL; count = 0; max2 = 0;
845 for (this = 0; this < count; this++) {
846 msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
847 if (msp34xx_sleep(msp,100))
849 val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
853 val2 = val, max2 = this;
854 dprintk("msp3400: carrier2 val: %5d / %s\n", val,cd[this].name);
857 /* programm the msp3400 according to the results */
858 msp->main = carrier_detect_main[max1].cdo;
863 msp->second = carrier_detect_55[max2].cdo;
864 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
866 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
867 msp->watch_stereo = 1;
868 } else if (max2 == 1 && HAVE_NICAM(msp)) {
870 msp->second = carrier_detect_55[max2].cdo;
871 msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
873 msp3400c_setcarrier(client, msp->second, msp->main);
874 msp->watch_stereo = 1;
881 msp->second = MSP_CARRIER(6.552);
882 msp3400c_setmode(client, MSP_MODE_FM_NICAM2);
884 msp3400c_setcarrier(client, msp->second, msp->main);
885 msp->watch_stereo = 1;
888 if (max2 == 1 || max2 == 2) {
890 msp->second = carrier_detect_65[max2].cdo;
891 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
893 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
894 msp->watch_stereo = 1;
895 } else if (max2 == 0 &&
896 msp->norm == VIDEO_MODE_SECAM) {
897 /* L NICAM or AM-mono */
898 msp->second = carrier_detect_65[max2].cdo;
899 msp3400c_setmode(client, MSP_MODE_AM_NICAM);
901 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
902 msp3400c_setcarrier(client, msp->second, msp->main);
903 /* volume prescale for SCART (AM mono input) */
904 msp3400c_write(client,I2C_MSP3400C_DFP, 0x000d, 0x1900);
905 msp->watch_stereo = 1;
906 } else if (max2 == 0 && HAVE_NICAM(msp)) {
908 msp->second = carrier_detect_65[max2].cdo;
909 msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
911 msp3400c_setcarrier(client, msp->second, msp->main);
912 msp->watch_stereo = 1;
920 msp->second = carrier_detect_main[max1].cdo;
921 msp3400c_setmode(client, MSP_MODE_FM_TERRA);
923 msp3400c_setcarrier(client, msp->second, msp->main);
924 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
925 msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
930 msp3400c_setvolume(client, msp->muted,
931 msp->volume, msp->balance);
933 msp3400c_print_mode(msp);
935 /* monitor tv audio mode */
936 while (msp->watch_stereo) {
937 if (msp34xx_sleep(msp,5000))
939 watch_stereo(client);
942 dprintk(KERN_DEBUG "msp3400: thread: exit\n");
946 /* ----------------------------------------------------------------------- */
947 /* this one uses the automatic sound standard detection of newer */
948 /* msp34xx chip versions */
950 static struct MODES {
955 { 0x0000, 0, 0, "ERROR" },
956 { 0x0001, 0, 0, "autodetect start" },
957 { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), "4.5/4.72 M Dual FM-Stereo" },
958 { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), "5.5/5.74 B/G Dual FM-Stereo" },
959 { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
960 { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
961 { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
962 { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
963 { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
964 { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
965 { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
966 { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
967 { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
968 { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
969 { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
970 { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), "10.7 FM-Stereo Radio" },
971 { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 SAT-Mono" },
972 { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), "7.02/7.20 SAT-Stereo" },
973 { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), "7.2 SAT ADR" },
974 { -1, 0, 0, NULL }, /* EOF */
977 static inline const char *msp34xx_standard_mode_name(int mode)
980 for (i = 0; modelist[i].name != NULL; i++)
981 if (modelist[i].retval == mode)
982 return modelist[i].name;
986 static int msp34xx_modus(int norm)
991 /* experimental: not sure this works with all chip versions */
994 /* previous value, try this if it breaks ... */
997 case VIDEO_MODE_NTSC: /* BTSC */
999 case VIDEO_MODE_SECAM:
1001 case VIDEO_MODE_RADIO:
1003 case VIDEO_MODE_AUTO:
1010 static int msp34xx_standard(int norm)
1013 case VIDEO_MODE_PAL:
1015 case VIDEO_MODE_NTSC: /* BTSC */
1017 case VIDEO_MODE_SECAM:
1019 case VIDEO_MODE_RADIO:
1026 static int msp3410d_thread(void *data)
1028 struct i2c_client *client = data;
1029 struct msp3400c *msp = i2c_get_clientdata(client);
1032 printk("msp3410: daemon started\n");
1034 d2printk(KERN_DEBUG "msp3410: thread: sleep\n");
1035 msp34xx_sleep(msp,-1);
1036 d2printk(KERN_DEBUG "msp3410: thread: wakeup\n");
1039 dprintk("msp3410: thread: restart scan\n");
1041 if (kthread_should_stop())
1044 if (msp->mode == MSP_MODE_EXTERN) {
1045 /* no carrier scan needed, just unmute */
1046 dprintk(KERN_DEBUG "msp3410: thread: no carrier scan\n");
1047 msp3400c_setvolume(client, msp->muted,
1048 msp->volume, msp->balance);
1052 /* put into sane state (and mute) */
1053 msp3400c_reset(client);
1055 /* some time for the tuner to sync */
1056 if (msp34xx_sleep(msp,200))
1059 /* start autodetect */
1060 mode = msp34xx_modus(msp->norm);
1061 std = msp34xx_standard(msp->norm);
1062 msp3400c_write(client, I2C_MSP3400C_DEM, 0x30, mode);
1063 msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, std);
1064 msp->watch_stereo = 0;
1067 printk(KERN_DEBUG "msp3410: setting mode: %s (0x%04x)\n",
1068 msp34xx_standard_mode_name(std) ,std);
1071 /* programmed some specific mode */
1074 /* triggered autodetect */
1076 if (msp34xx_sleep(msp,100))
1080 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e);
1083 dprintk(KERN_DEBUG "msp3410: detection still in progress\n");
1086 for (i = 0; modelist[i].name != NULL; i++)
1087 if (modelist[i].retval == val)
1089 dprintk(KERN_DEBUG "msp3410: current mode: %s (0x%04x)\n",
1090 modelist[i].name ? modelist[i].name : "unknown",
1092 msp->main = modelist[i].main;
1093 msp->second = modelist[i].second;
1095 if (amsound && (msp->norm == VIDEO_MODE_SECAM) && (val != 0x0009)) {
1096 /* autodetection has failed, let backup */
1097 dprintk(KERN_DEBUG "msp3410: autodetection failed,"
1098 " switching to backup mode: %s (0x%04x)\n",
1099 modelist[8].name ? modelist[8].name : "unknown",val);
1101 msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, val);
1104 /* set various prescales */
1105 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0d, 0x1900); /* scart */
1106 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0e, 0x2403); /* FM */
1107 msp3400c_write(client, I2C_MSP3400C_DFP, 0x10, 0x5a00); /* nicam */
1111 case 0x0008: /* B/G NICAM */
1112 case 0x000a: /* I NICAM */
1114 msp->mode = MSP_MODE_FM_NICAM1;
1116 msp->mode = MSP_MODE_FM_NICAM2;
1117 /* just turn on stereo */
1118 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1120 msp->watch_stereo = 1;
1121 msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
1124 msp->mode = MSP_MODE_AM_NICAM;
1125 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
1127 msp3400c_set_audmode(client,V4L2_TUNER_MODE_MONO);
1128 msp->watch_stereo = 1;
1130 case 0x0020: /* BTSC */
1131 /* just turn on stereo */
1132 msp->mode = MSP_MODE_BTSC;
1133 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1135 msp->watch_stereo = 1;
1136 msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
1138 case 0x0040: /* FM radio */
1139 msp->mode = MSP_MODE_FM_RADIO;
1140 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1141 msp->audmode = V4L2_TUNER_MODE_STEREO;
1143 msp->watch_stereo = 0;
1144 /* not needed in theory if HAVE_RADIO(), but
1145 short programming enables carrier mute */
1146 msp3400c_setmode(client,MSP_MODE_FM_RADIO);
1147 msp3400c_setcarrier(client, MSP_CARRIER(10.7),
1150 msp3400c_set_scart(client,SCART_IN2,0);
1151 /* msp34xx does radio decoding */
1152 msp3400c_write(client,I2C_MSP3400C_DFP, 0x08, 0x0020);
1153 msp3400c_write(client,I2C_MSP3400C_DFP, 0x09, 0x0020);
1154 msp3400c_write(client,I2C_MSP3400C_DFP, 0x0b, 0x0020);
1159 msp->mode = MSP_MODE_FM_TERRA;
1160 msp->rxsubchans = V4L2_TUNER_SUB_MONO;
1161 msp->audmode = V4L2_TUNER_MODE_MONO;
1163 msp->watch_stereo = 1;
1167 /* unmute, restore misc registers */
1168 msp3400c_setbass(client, msp->bass);
1169 msp3400c_settreble(client, msp->treble);
1170 msp3400c_setvolume(client, msp->muted,
1171 msp->volume, msp->balance);
1172 msp3400c_write(client, I2C_MSP3400C_DFP, 0x0013, msp->acb);
1174 /* monitor tv audio mode */
1175 while (msp->watch_stereo) {
1176 if (msp34xx_sleep(msp,5000))
1178 watch_stereo(client);
1181 dprintk(KERN_DEBUG "msp3410: thread: exit\n");
1185 /* ----------------------------------------------------------------------- */
1186 /* msp34xxG + (simpler no-thread) */
1187 /* this one uses both automatic standard detection and automatic sound */
1188 /* select which are available in the newer G versions */
1189 /* struct msp: only norm, acb and source are really used in this mode */
1191 static void msp34xxg_set_source(struct i2c_client *client, int source);
1193 /* (re-)initialize the msp34xxg, according to the current norm in msp->norm
1194 * return 0 if it worked, -1 if it failed
1196 static int msp34xxg_init(struct i2c_client *client)
1198 struct msp3400c *msp = i2c_get_clientdata(client);
1201 if (msp3400c_reset(client))
1204 /* make sure that input/output is muted (paranoid mode) */
1205 if (msp3400c_write(client,
1208 0x0f20 /* mute DSP input, mute SCART 1 */))
1211 /* step-by-step initialisation, as described in the manual */
1212 modus = msp34xx_modus(msp->norm);
1213 std = msp34xx_standard(msp->norm);
1214 modus &= ~0x03; /* STATUS_CHANGE=0 */
1215 modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION=1 */
1216 if (msp3400c_write(client,
1221 if (msp3400c_write(client,
1227 /* write the dfps that may have an influence on
1228 standard/audio autodetection right now */
1229 msp34xxg_set_source(client, msp->source);
1231 if (msp3400c_write(client, I2C_MSP3400C_DFP,
1232 0x0e, /* AM/FM Prescale */
1233 0x3000 /* default: [15:8] 75khz deviation */))
1236 if (msp3400c_write(client, I2C_MSP3400C_DFP,
1237 0x10, /* NICAM Prescale */
1238 0x5a00 /* default: 9db gain (as recommended) */))
1241 if (msp3400c_write(client,
1243 0x20, /* STANDARD SELECT */
1244 standard /* default: 0x01 for automatic standard select*/))
1249 static int msp34xxg_thread(void *data)
1251 struct i2c_client *client = data;
1252 struct msp3400c *msp = i2c_get_clientdata(client);
1255 printk("msp34xxg: daemon started\n");
1256 msp->source = 1; /* default */
1258 d2printk(KERN_DEBUG "msp34xxg: thread: sleep\n");
1259 msp34xx_sleep(msp,-1);
1260 d2printk(KERN_DEBUG "msp34xxg: thread: wakeup\n");
1263 dprintk("msp34xxg: thread: restart scan\n");
1265 if (kthread_should_stop())
1269 msp34xxg_init(client);
1274 /* watch autodetect */
1275 dprintk("msp34xxg: triggered autodetect, waiting for result\n");
1276 for (i = 0; i < 10; i++) {
1277 if (msp34xx_sleep(msp,100))
1281 val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e);
1286 dprintk("msp34xxg: detection still in progress\n");
1289 dprintk("msp34xxg: detection still in progress after 10 tries. giving up.\n");
1294 dprintk("msp34xxg: current mode: %s (0x%04x)\n",
1295 msp34xx_standard_mode_name(std), std);
1297 /* unmute: dispatch sound to scart output, set scart volume */
1298 dprintk("msp34xxg: unmute\n");
1300 msp3400c_setbass(client, msp->bass);
1301 msp3400c_settreble(client, msp->treble);
1302 msp3400c_setvolume(client, msp->muted, msp->volume, msp->balance);
1305 if (msp3400c_write(client,
1311 dprintk(KERN_DEBUG "msp34xxg: thread: exit\n");
1315 /* set the same 'source' for the loudspeaker, scart and quasi-peak detector
1316 * the value for source is the same as bit 15:8 of DFP registers 0x08,
1317 * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
1319 * this function replaces msp3400c_setstereo
1321 static void msp34xxg_set_source(struct i2c_client *client, int source)
1323 struct msp3400c *msp = i2c_get_clientdata(client);
1325 /* fix matrix mode to stereo and let the msp choose what
1326 * to output according to 'source', as recommended
1327 * for MONO (source==0) downmixing set bit[7:0] to 0x30
1329 int value = (source&0x07)<<8|(source==0 ? 0x30:0x20);
1330 dprintk("msp34xxg: set source to %d (0x%x)\n", source, value);
1331 msp3400c_write(client,
1333 0x08, /* Loudspeaker Output */
1335 msp3400c_write(client,
1337 0x0a, /* SCART1 DA Output */
1339 msp3400c_write(client,
1341 0x0c, /* Quasi-peak detector */
1344 * set identification threshold. Personally, I
1345 * I set it to a higher value that the default
1346 * of 0x190 to ignore noisy stereo signals.
1347 * this needs tuning. (recommended range 0x00a0-0x03c0)
1348 * 0x7f0 = forced mono mode
1350 msp3400c_write(client,
1352 0x22, /* a2 threshold for stereo/bilingual */
1357 static void msp34xxg_detect_stereo(struct i2c_client *client)
1359 struct msp3400c *msp = i2c_get_clientdata(client);
1361 int status = msp3400c_read(client,
1363 0x0200 /* STATUS */);
1364 int is_bilingual = status&0x100;
1365 int is_stereo = status&0x40;
1367 msp->rxsubchans = 0;
1369 msp->rxsubchans |= V4L2_TUNER_SUB_STEREO;
1371 msp->rxsubchans |= V4L2_TUNER_SUB_MONO;
1373 msp->rxsubchans |= V4L2_TUNER_SUB_LANG1|V4L2_TUNER_SUB_LANG2;
1374 /* I'm supposed to check whether it's SAP or not
1375 * and set only LANG2/SAP in this case. Yet, the MSP
1376 * does a lot of work to hide this and handle everything
1377 * the same way. I don't want to work around it so unless
1378 * this is a problem, I'll handle SAP just like lang1/lang2.
1381 dprintk("msp34xxg: status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
1382 status, is_stereo, is_bilingual, msp->rxsubchans);
1385 static void msp34xxg_set_audmode(struct i2c_client *client, int audmode)
1387 struct msp3400c *msp = i2c_get_clientdata(client);
1391 case V4L2_TUNER_MODE_MONO:
1392 source=0; /* mono only */
1394 case V4L2_TUNER_MODE_STEREO:
1395 source=1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */
1396 /* problem: that could also mean 2 (scart input) */
1398 case V4L2_TUNER_MODE_LANG1:
1399 source=3; /* stereo or A */
1401 case V4L2_TUNER_MODE_LANG2:
1402 source=4; /* stereo or B */
1409 msp->audmode = audmode;
1410 msp34xxg_set_source(client, source);
1414 /* ----------------------------------------------------------------------- */
1416 static int msp_attach(struct i2c_adapter *adap, int addr, int kind);
1417 static int msp_detach(struct i2c_client *client);
1418 static int msp_probe(struct i2c_adapter *adap);
1419 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
1421 static int msp_suspend(struct device * dev, u32 state, u32 level);
1422 static int msp_resume(struct device * dev, u32 level);
1424 static void msp_wake_thread(struct i2c_client *client);
1426 static struct i2c_driver driver = {
1427 .owner = THIS_MODULE,
1428 .name = "i2c msp3400 driver",
1429 .id = I2C_DRIVERID_MSP3400,
1430 .flags = I2C_DF_NOTIFY,
1431 .attach_adapter = msp_probe,
1432 .detach_client = msp_detach,
1433 .command = msp_command,
1435 .suspend = msp_suspend,
1436 .resume = msp_resume,
1440 static struct i2c_client client_template =
1442 I2C_DEVNAME("(unset)"),
1443 .flags = I2C_CLIENT_ALLOW_USE,
1447 static int msp_attach(struct i2c_adapter *adap, int addr, int kind)
1449 struct msp3400c *msp;
1450 struct i2c_client *c;
1451 int (*thread_func)(void *data) = NULL;
1453 client_template.adapter = adap;
1454 client_template.addr = addr;
1456 if (-1 == msp3400c_reset(&client_template)) {
1457 dprintk("msp3400: no chip found\n");
1461 if (NULL == (c = kmalloc(sizeof(struct i2c_client),GFP_KERNEL)))
1463 memcpy(c,&client_template,sizeof(struct i2c_client));
1464 if (NULL == (msp = kmalloc(sizeof(struct msp3400c),GFP_KERNEL))) {
1469 memset(msp,0,sizeof(struct msp3400c));
1470 msp->volume = 58880; /* 0db gain */
1471 msp->balance = 32768;
1473 msp->treble = 32768;
1477 i2c_set_clientdata(c, msp);
1478 init_waitqueue_head(&msp->wq);
1480 if (-1 == msp3400c_reset(c)) {
1483 dprintk("msp3400: no chip found\n");
1487 msp->rev1 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1e);
1488 if (-1 != msp->rev1)
1489 msp->rev2 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1f);
1490 if ((-1 == msp->rev1) || (0 == msp->rev1 && 0 == msp->rev2)) {
1493 printk("msp3400: error while reading chip version\n");
1497 msp3400c_setvolume(c, msp->muted, msp->volume, msp->balance);
1499 snprintf(c->name, sizeof(c->name), "MSP34%02d%c-%c%d",
1500 (msp->rev2>>8)&0xff, (msp->rev1&0xff)+'@',
1501 ((msp->rev1>>8)&0xff)+'@', msp->rev2&0x1f);
1503 msp->opmode = opmode;
1504 if (OPMODE_AUTO == msp->opmode) {
1505 if (HAVE_SIMPLER(msp))
1506 msp->opmode = OPMODE_SIMPLER;
1507 else if (HAVE_SIMPLE(msp))
1508 msp->opmode = OPMODE_SIMPLE;
1510 msp->opmode = OPMODE_MANUAL;
1513 /* hello world :-) */
1514 printk(KERN_INFO "msp34xx: init: chip=%s",i2c_clientname(c));
1515 if (HAVE_NICAM(msp))
1517 if (HAVE_SIMPLE(msp))
1519 if (HAVE_SIMPLER(msp))
1520 printk(" +simpler");
1521 if (HAVE_RADIO(msp))
1524 /* version-specific initialization */
1525 switch (msp->opmode) {
1527 printk(" mode=manual");
1528 thread_func = msp3400c_thread;
1531 printk(" mode=simple");
1532 thread_func = msp3410d_thread;
1534 case OPMODE_SIMPLER:
1535 printk(" mode=simpler");
1536 thread_func = msp34xxg_thread;
1541 /* startup control thread if needed */
1543 msp->kthread = kthread_run(thread_func, c, "msp34xx");
1544 if (NULL == msp->kthread)
1545 printk(KERN_WARNING "msp34xx: kernel_thread() failed\n");
1550 i2c_attach_client(c);
1554 static int msp_detach(struct i2c_client *client)
1556 struct msp3400c *msp = i2c_get_clientdata(client);
1558 /* shutdown control thread */
1559 if (msp->kthread >= 0) {
1561 kthread_stop(msp->kthread);
1563 msp3400c_reset(client);
1565 i2c_detach_client(client);
1571 static int msp_probe(struct i2c_adapter *adap)
1573 if (adap->class & I2C_CLASS_TV_ANALOG)
1574 return i2c_probe(adap, &addr_data, msp_attach);
1578 static void msp_wake_thread(struct i2c_client *client)
1580 struct msp3400c *msp = i2c_get_clientdata(client);
1582 if (NULL == msp->kthread)
1584 msp3400c_setvolume(client,msp->muted,0,0);
1585 msp->watch_stereo = 0;
1587 wake_up_interruptible(&msp->wq);
1590 /* ----------------------------------------------------------------------- */
1592 static int mode_v4l2_to_v4l1(int rxsubchans)
1596 if (rxsubchans & V4L2_TUNER_SUB_STEREO)
1597 mode |= VIDEO_SOUND_STEREO;
1598 if (rxsubchans & V4L2_TUNER_SUB_LANG2)
1599 mode |= VIDEO_SOUND_LANG2;
1600 if (rxsubchans & V4L2_TUNER_SUB_LANG1)
1601 mode |= VIDEO_SOUND_LANG1;
1603 mode |= VIDEO_SOUND_MONO;
1607 static int mode_v4l1_to_v4l2(int mode)
1609 if (mode & VIDEO_SOUND_STEREO)
1610 return V4L2_TUNER_MODE_STEREO;
1611 if (mode & VIDEO_SOUND_LANG2)
1612 return V4L2_TUNER_MODE_LANG2;
1613 if (mode & VIDEO_SOUND_LANG1)
1614 return V4L2_TUNER_MODE_LANG1;
1615 return V4L2_TUNER_MODE_MONO;
1618 static void msp_any_detect_stereo(struct i2c_client *client)
1620 struct msp3400c *msp = i2c_get_clientdata(client);
1622 switch (msp->opmode) {
1625 autodetect_stereo(client);
1627 case OPMODE_SIMPLER:
1628 msp34xxg_detect_stereo(client);
1633 static void msp_any_set_audmode(struct i2c_client *client, int audmode)
1635 struct msp3400c *msp = i2c_get_clientdata(client);
1637 switch (msp->opmode) {
1640 msp->watch_stereo = 0;
1641 msp3400c_set_audmode(client, audmode);
1643 case OPMODE_SIMPLER:
1644 msp34xxg_set_audmode(client, audmode);
1649 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
1651 struct msp3400c *msp = i2c_get_clientdata(client);
1657 case AUDC_SET_INPUT:
1658 dprintk(KERN_DEBUG "msp34xx: AUDC_SET_INPUT(%d)\n",*sarg);
1659 if (*sarg == msp->input)
1664 /* Hauppauge uses IN2 for the radio */
1665 msp->mode = MSP_MODE_FM_RADIO;
1668 case AUDIO_EXTERN_1:
1669 /* IN1 is often used for external input ... */
1670 msp->mode = MSP_MODE_EXTERN;
1673 case AUDIO_EXTERN_2:
1674 /* ... sometimes it is IN2 through ;) */
1675 msp->mode = MSP_MODE_EXTERN;
1682 if (*sarg & AUDIO_MUTE)
1683 msp3400c_set_scart(client,SCART_MUTE,0);
1687 msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
1688 msp->audmode = V4L2_TUNER_MODE_STEREO;
1689 msp3400c_set_scart(client,scart,0);
1690 msp3400c_write(client,I2C_MSP3400C_DFP,0x000d,0x1900);
1691 if (msp->opmode != OPMODE_SIMPLER)
1692 msp3400c_set_audmode(client, msp->audmode);
1694 msp_wake_thread(client);
1697 case AUDC_SET_RADIO:
1698 dprintk(KERN_DEBUG "msp34xx: AUDC_SET_RADIO\n");
1699 msp->norm = VIDEO_MODE_RADIO;
1700 dprintk(KERN_DEBUG "msp34xx: switching to radio mode\n");
1701 msp->watch_stereo = 0;
1702 switch (msp->opmode) {
1704 /* set msp3400 to FM radio mode */
1705 msp3400c_setmode(client,MSP_MODE_FM_RADIO);
1706 msp3400c_setcarrier(client, MSP_CARRIER(10.7),
1708 msp3400c_setvolume(client, msp->muted,
1709 msp->volume, msp->balance);
1712 case OPMODE_SIMPLER:
1713 /* the thread will do for us */
1714 msp_wake_thread(client);
1719 /* --- v4l ioctls --- */
1720 /* take care: bttv does userspace copying, we'll get a
1721 kernel pointer here... */
1724 struct video_audio *va = arg;
1726 dprintk(KERN_DEBUG "msp34xx: VIDIOCGAUDIO\n");
1727 va->flags |= VIDEO_AUDIO_VOLUME |
1729 VIDEO_AUDIO_TREBLE |
1730 VIDEO_AUDIO_MUTABLE;
1732 va->flags |= VIDEO_AUDIO_MUTE;
1734 va->volume = msp->volume;
1735 va->balance = (va->volume) ? msp->balance : 32768;
1736 va->bass = msp->bass;
1737 va->treble = msp->treble;
1739 msp_any_detect_stereo(client);
1740 va->mode = mode_v4l2_to_v4l1(msp->rxsubchans);
1745 struct video_audio *va = arg;
1747 dprintk(KERN_DEBUG "msp34xx: VIDIOCSAUDIO\n");
1748 msp->muted = (va->flags & VIDEO_AUDIO_MUTE);
1749 msp->volume = va->volume;
1750 msp->balance = va->balance;
1751 msp->bass = va->bass;
1752 msp->treble = va->treble;
1754 msp3400c_setvolume(client, msp->muted,
1755 msp->volume, msp->balance);
1756 msp3400c_setbass(client,msp->bass);
1757 msp3400c_settreble(client,msp->treble);
1759 if (va->mode != 0 && msp->norm != VIDEO_MODE_RADIO)
1760 msp_any_set_audmode(client,mode_v4l1_to_v4l2(va->mode));
1765 struct video_channel *vc = arg;
1767 dprintk(KERN_DEBUG "msp34xx: VIDIOCSCHAN (norm=%d)\n",vc->norm);
1768 msp->norm = vc->norm;
1769 msp_wake_thread(client);
1774 case VIDIOC_S_FREQUENCY:
1776 /* new channel -- kick audio carrier scan */
1777 dprintk(KERN_DEBUG "msp34xx: VIDIOCSFREQ\n");
1778 msp_wake_thread(client);
1782 /* --- v4l2 ioctls --- */
1783 case VIDIOC_G_TUNER:
1785 struct v4l2_tuner *vt = arg;
1787 msp_any_detect_stereo(client);
1788 vt->audmode = msp->audmode;
1789 vt->rxsubchans = msp->rxsubchans;
1790 vt->capability = V4L2_TUNER_CAP_STEREO |
1791 V4L2_TUNER_CAP_LANG1|
1792 V4L2_TUNER_CAP_LANG2;
1795 case VIDIOC_S_TUNER:
1797 struct v4l2_tuner *vt=(struct v4l2_tuner *)arg;
1799 /* only set audmode */
1800 if (vt->audmode != -1 && vt->audmode != 0)
1801 msp_any_set_audmode(client, vt->audmode);
1805 /* msp34xx specific */
1806 case MSP_SET_MATRIX:
1808 struct msp_matrix *mspm = arg;
1810 dprintk(KERN_DEBUG "msp34xx: MSP_SET_MATRIX\n");
1811 msp3400c_set_scart(client, mspm->input, mspm->output);
1822 static int msp_suspend(struct device * dev, u32 state, u32 level)
1824 struct i2c_client *c = container_of(dev, struct i2c_client, dev);
1826 dprintk("msp34xx: suspend\n");
1831 static int msp_resume(struct device * dev, u32 level)
1833 struct i2c_client *c = container_of(dev, struct i2c_client, dev);
1835 dprintk("msp34xx: resume\n");
1840 /* ----------------------------------------------------------------------- */
1842 static int __init msp3400_init_module(void)
1844 return i2c_add_driver(&driver);
1847 static void __exit msp3400_cleanup_module(void)
1849 i2c_del_driver(&driver);
1852 module_init(msp3400_init_module);
1853 module_exit(msp3400_cleanup_module);
1856 * Overrides for Emacs so that we follow Linus's tabbing style.
1857 * ---------------------------------------------------------------------------