err.no Git - linux-2.6/blob - drivers/media/video/cx88/cx88-tvaudio.c

   1 /*
   2
   3     cx88x-audio.c - Conexant CX23880/23881 audio downstream driver driver
   4
   5      (c) 2001 Michael Eskin, Tom Zakrajsek [Windows version]
   6      (c) 2002 Yurij Sysoev <yurij@naturesoft.net>
   7      (c) 2003 Gerd Knorr <kraxel@bytesex.org>
   8
   9     -----------------------------------------------------------------------
  10
  11     Lot of voodoo here.  Even the data sheet doesn't help to
  12     understand what is going on here, the documentation for the audio
  13     part of the cx2388x chip is *very* bad.
  14
  15     Some of this comes from party done linux driver sources I got from
  16     [undocumented].
  17
  18     Some comes from the dscaler sources, one of the dscaler driver guy works
  19     for Conexant ...
  20
  21     -----------------------------------------------------------------------
  22
  23     This program is free software; you can redistribute it and/or modify
  24     it under the terms of the GNU General Public License as published by
  25     the Free Software Foundation; either version 2 of the License, or
  26     (at your option) any later version.
  27
  28     This program is distributed in the hope that it will be useful,
  29     but WITHOUT ANY WARRANTY; without even the implied warranty of
  30     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  31     GNU General Public License for more details.
  32
  33     You should have received a copy of the GNU General Public License
  34     along with this program; if not, write to the Free Software
  35     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  36 */
  37
  38 #include <linux/module.h>
  39 #include <linux/moduleparam.h>
  40 #include <linux/errno.h>
  41 #include <linux/freezer.h>
  42 #include <linux/kernel.h>
  43 #include <linux/slab.h>
  44 #include <linux/mm.h>
  45 #include <linux/poll.h>
  46 #include <linux/signal.h>
  47 #include <linux/ioport.h>
  48 #include <linux/types.h>
  49 #include <linux/interrupt.h>
  50 #include <linux/vmalloc.h>
  51 #include <linux/init.h>
  52 #include <linux/delay.h>
  53 #include <linux/kthread.h>
  54
  55 #include "cx88.h"
  56
  57 static unsigned int audio_debug = 0;
  58 module_param(audio_debug, int, 0644);
  59 MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
  60
  61 static unsigned int always_analog = 0;
  62 module_param(always_analog,int,0644);
  63 MODULE_PARM_DESC(always_analog,"force analog audio out");
  64
  65 static unsigned int radio_deemphasis = 0;
  66 module_param(radio_deemphasis,int,0644);
  67 MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
  68                  "0=None, 1=50us (elsewhere), 2=75us (USA)");
  69
  70 #define dprintk(fmt, arg...)    if (audio_debug) \
  71         printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
  72
  73 /* ----------------------------------------------------------- */
  74
  75 static char *aud_ctl_names[64] = {
  76         [EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO",
  77         [EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO",
  78         [EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP",
  79         [EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO",
  80         [EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP",
  81         [EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1",
  82         [EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2",
  83         [EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO",
  84         [EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2",
  85         [EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO",
  86         [EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1",
  87         [EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2",
  88         [EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO",
  89         [EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2",
  90         [EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO",
  91         [EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1",
  92         [EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2",
  93         [EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO",
  94         [EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2",
  95         [EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO",
  96         [EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO",
  97         [EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO",
  98         [EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO",
  99 };
 100
 101 struct rlist {
 102         u32 reg;
 103         u32 val;
 104 };
 105
 106 static void set_audio_registers(struct cx88_core *core, const struct rlist *l)
 107 {
 108         int i;
 109
 110         for (i = 0; l[i].reg; i++) {
 111                 switch (l[i].reg) {
 112                 case AUD_PDF_DDS_CNST_BYTE2:
 113                 case AUD_PDF_DDS_CNST_BYTE1:
 114                 case AUD_PDF_DDS_CNST_BYTE0:
 115                 case AUD_QAM_MODE:
 116                 case AUD_PHACC_FREQ_8MSB:
 117                 case AUD_PHACC_FREQ_8LSB:
 118                         cx_writeb(l[i].reg, l[i].val);
 119                         break;
 120                 default:
 121                         cx_write(l[i].reg, l[i].val);
 122                         break;
 123                 }
 124         }
 125 }
 126
 127 static void set_audio_start(struct cx88_core *core, u32 mode)
 128 {
 129         /* mute */
 130         cx_write(AUD_VOL_CTL, (1 << 6));
 131
 132         /* start programming */
 133         cx_write(AUD_INIT, mode);
 134         cx_write(AUD_INIT_LD, 0x0001);
 135         cx_write(AUD_SOFT_RESET, 0x0001);
 136 }
 137
 138 static void set_audio_finish(struct cx88_core *core, u32 ctl)
 139 {
 140         u32 volume;
 141
 142         /* restart dma; This avoids buzz in NICAM and is good in others  */
 143         cx88_stop_audio_dma(core);
 144         cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
 145         cx88_start_audio_dma(core);
 146
 147         if (core->board.mpeg & CX88_MPEG_BLACKBIRD) {
 148                 cx_write(AUD_I2SINPUTCNTL, 4);
 149                 cx_write(AUD_BAUDRATE, 1);
 150                 /* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
 151                 cx_set(AUD_CTL, EN_I2SOUT_ENABLE);
 152                 cx_write(AUD_I2SOUTPUTCNTL, 1);
 153                 cx_write(AUD_I2SCNTL, 0);
 154                 /* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
 155         }
 156         if ((always_analog) || (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))) {
 157                 ctl |= EN_DAC_ENABLE;
 158                 cx_write(AUD_CTL, ctl);
 159         }
 160
 161         /* finish programming */
 162         cx_write(AUD_SOFT_RESET, 0x0000);
 163
 164         /* unmute */
 165         volume = cx_sread(SHADOW_AUD_VOL_CTL);
 166         cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume);
 167 }
 168
 169 /* ----------------------------------------------------------- */
 170
 171 static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap,
 172                                     u32 mode)
 173 {
 174         static const struct rlist btsc[] = {
 175                 {AUD_AFE_12DB_EN, 0x00000001},
 176                 {AUD_OUT1_SEL, 0x00000013},
 177                 {AUD_OUT1_SHIFT, 0x00000000},
 178                 {AUD_POLY0_DDS_CONSTANT, 0x0012010c},
 179                 {AUD_DMD_RA_DDS, 0x00c3e7aa},
 180                 {AUD_DBX_IN_GAIN, 0x00004734},
 181                 {AUD_DBX_WBE_GAIN, 0x00004640},
 182                 {AUD_DBX_SE_GAIN, 0x00008d31},
 183                 {AUD_DCOC_0_SRC, 0x0000001a},
 184                 {AUD_IIR1_4_SEL, 0x00000021},
 185                 {AUD_DCOC_PASS_IN, 0x00000003},
 186                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 187                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 188                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 189                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 190                 {AUD_DN0_FREQ, 0x0000283b},
 191                 {AUD_DN2_SRC_SEL, 0x00000008},
 192                 {AUD_DN2_FREQ, 0x00003000},
 193                 {AUD_DN2_AFC, 0x00000002},
 194                 {AUD_DN2_SHFT, 0x00000000},
 195                 {AUD_IIR2_2_SEL, 0x00000020},
 196                 {AUD_IIR2_2_SHIFT, 0x00000000},
 197                 {AUD_IIR2_3_SEL, 0x0000001f},
 198                 {AUD_IIR2_3_SHIFT, 0x00000000},
 199                 {AUD_CRDC1_SRC_SEL, 0x000003ce},
 200                 {AUD_CRDC1_SHIFT, 0x00000000},
 201                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 202                 {AUD_DCOC_1_SRC, 0x0000001b},
 203                 {AUD_DCOC1_SHIFT, 0x00000000},
 204                 {AUD_RDSI_SEL, 0x00000008},
 205                 {AUD_RDSQ_SEL, 0x00000008},
 206                 {AUD_RDSI_SHIFT, 0x00000000},
 207                 {AUD_RDSQ_SHIFT, 0x00000000},
 208                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 209                 { /* end of list */ },
 210         };
 211         static const struct rlist btsc_sap[] = {
 212                 {AUD_AFE_12DB_EN, 0x00000001},
 213                 {AUD_DBX_IN_GAIN, 0x00007200},
 214                 {AUD_DBX_WBE_GAIN, 0x00006200},
 215                 {AUD_DBX_SE_GAIN, 0x00006200},
 216                 {AUD_IIR1_1_SEL, 0x00000000},
 217                 {AUD_IIR1_3_SEL, 0x00000001},
 218                 {AUD_DN1_SRC_SEL, 0x00000007},
 219                 {AUD_IIR1_4_SHIFT, 0x00000006},
 220                 {AUD_IIR2_1_SHIFT, 0x00000000},
 221                 {AUD_IIR2_2_SHIFT, 0x00000000},
 222                 {AUD_IIR3_0_SHIFT, 0x00000000},
 223                 {AUD_IIR3_1_SHIFT, 0x00000000},
 224                 {AUD_IIR3_0_SEL, 0x0000000d},
 225                 {AUD_IIR3_1_SEL, 0x0000000e},
 226                 {AUD_DEEMPH1_SRC_SEL, 0x00000014},
 227                 {AUD_DEEMPH1_SHIFT, 0x00000000},
 228                 {AUD_DEEMPH1_G0, 0x00004000},
 229                 {AUD_DEEMPH1_A0, 0x00000000},
 230                 {AUD_DEEMPH1_B0, 0x00000000},
 231                 {AUD_DEEMPH1_A1, 0x00000000},
 232                 {AUD_DEEMPH1_B1, 0x00000000},
 233                 {AUD_OUT0_SEL, 0x0000003f},
 234                 {AUD_OUT1_SEL, 0x0000003f},
 235                 {AUD_DN1_AFC, 0x00000002},
 236                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 237                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 238                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 239                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 240                 {AUD_IIR1_0_SEL, 0x0000001d},
 241                 {AUD_IIR1_2_SEL, 0x0000001e},
 242                 {AUD_IIR2_1_SEL, 0x00000002},
 243                 {AUD_IIR2_2_SEL, 0x00000004},
 244                 {AUD_IIR3_2_SEL, 0x0000000f},
 245                 {AUD_DCOC2_SHIFT, 0x00000001},
 246                 {AUD_IIR3_2_SHIFT, 0x00000001},
 247                 {AUD_DEEMPH0_SRC_SEL, 0x00000014},
 248                 {AUD_CORDIC_SHIFT_1, 0x00000006},
 249                 {AUD_POLY0_DDS_CONSTANT, 0x000e4db2},
 250                 {AUD_DMD_RA_DDS, 0x00f696e6},
 251                 {AUD_IIR2_3_SEL, 0x00000025},
 252                 {AUD_IIR1_4_SEL, 0x00000021},
 253                 {AUD_DN1_FREQ, 0x0000c965},
 254                 {AUD_DCOC_PASS_IN, 0x00000003},
 255                 {AUD_DCOC_0_SRC, 0x0000001a},
 256                 {AUD_DCOC_1_SRC, 0x0000001b},
 257                 {AUD_DCOC1_SHIFT, 0x00000000},
 258                 {AUD_RDSI_SEL, 0x00000009},
 259                 {AUD_RDSQ_SEL, 0x00000009},
 260                 {AUD_RDSI_SHIFT, 0x00000000},
 261                 {AUD_RDSQ_SHIFT, 0x00000000},
 262                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 263                 { /* end of list */ },
 264         };
 265
 266         mode |= EN_FMRADIO_EN_RDS;
 267
 268         if (sap) {
 269                 dprintk("%s SAP (status: unknown)\n", __FUNCTION__);
 270                 set_audio_start(core, SEL_SAP);
 271                 set_audio_registers(core, btsc_sap);
 272                 set_audio_finish(core, mode);
 273         } else {
 274                 dprintk("%s (status: known-good)\n", __FUNCTION__);
 275                 set_audio_start(core, SEL_BTSC);
 276                 set_audio_registers(core, btsc);
 277                 set_audio_finish(core, mode);
 278         }
 279 }
 280
 281 static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode)
 282 {
 283         static const struct rlist nicam_l[] = {
 284                 {AUD_AFE_12DB_EN, 0x00000001},
 285                 {AUD_RATE_ADJ1, 0x00000060},
 286                 {AUD_RATE_ADJ2, 0x000000F9},
 287                 {AUD_RATE_ADJ3, 0x000001CC},
 288                 {AUD_RATE_ADJ4, 0x000002B3},
 289                 {AUD_RATE_ADJ5, 0x00000726},
 290                 {AUD_DEEMPHDENOM1_R, 0x0000F3D0},
 291                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 292                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 293                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
 294                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
 295                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
 296                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 297                 {AUD_DMD_RA_DDS, 0x00C00000},
 298                 {AUD_PLL_INT, 0x0000001E},
 299                 {AUD_PLL_DDS, 0x00000000},
 300                 {AUD_PLL_FRAC, 0x0000E542},
 301                 {AUD_START_TIMER, 0x00000000},
 302                 {AUD_DEEMPHNUMER1_R, 0x000353DE},
 303                 {AUD_DEEMPHNUMER2_R, 0x000001B1},
 304                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 305                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 306                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 307                 {AUD_QAM_MODE, 0x05},
 308                 {AUD_PHACC_FREQ_8MSB, 0x34},
 309                 {AUD_PHACC_FREQ_8LSB, 0x4C},
 310                 {AUD_DEEMPHGAIN_R, 0x00006680},
 311                 {AUD_RATE_THRES_DMD, 0x000000C0},
 312                 { /* end of list */ },
 313         };
 314
 315         static const struct rlist nicam_bgdki_common[] = {
 316                 {AUD_AFE_12DB_EN, 0x00000001},
 317                 {AUD_RATE_ADJ1, 0x00000010},
 318                 {AUD_RATE_ADJ2, 0x00000040},
 319                 {AUD_RATE_ADJ3, 0x00000100},
 320                 {AUD_RATE_ADJ4, 0x00000400},
 321                 {AUD_RATE_ADJ5, 0x00001000},
 322                 {AUD_ERRLOGPERIOD_R, 0x00000fff},
 323                 {AUD_ERRINTRPTTHSHLD1_R, 0x000003ff},
 324                 {AUD_ERRINTRPTTHSHLD2_R, 0x000000ff},
 325                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000003f},
 326                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 327                 {AUD_DEEMPHGAIN_R, 0x000023c2},
 328                 {AUD_DEEMPHNUMER1_R, 0x0002a7bc},
 329                 {AUD_DEEMPHNUMER2_R, 0x0003023e},
 330                 {AUD_DEEMPHDENOM1_R, 0x0000f3d0},
 331                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 332                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 333                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 334                 {AUD_QAM_MODE, 0x05},
 335                 { /* end of list */ },
 336         };
 337
 338         static const struct rlist nicam_i[] = {
 339                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 340                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 341                 {AUD_PHACC_FREQ_8LSB, 0x93},
 342                 { /* end of list */ },
 343         };
 344
 345         static const struct rlist nicam_default[] = {
 346                 {AUD_PDF_DDS_CNST_BYTE0, 0x16},
 347                 {AUD_PHACC_FREQ_8MSB, 0x34},
 348                 {AUD_PHACC_FREQ_8LSB, 0x4c},
 349                 { /* end of list */ },
 350         };
 351
 352         set_audio_start(core,SEL_NICAM);
 353         switch (core->tvaudio) {
 354         case WW_L:
 355                 dprintk("%s SECAM-L NICAM (status: devel)\n", __FUNCTION__);
 356                 set_audio_registers(core, nicam_l);
 357                 break;
 358         case WW_I:
 359                 dprintk("%s PAL-I NICAM (status: known-good)\n", __FUNCTION__);
 360                 set_audio_registers(core, nicam_bgdki_common);
 361                 set_audio_registers(core, nicam_i);
 362                 break;
 363         default:
 364                 dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __FUNCTION__);
 365                 set_audio_registers(core, nicam_bgdki_common);
 366                 set_audio_registers(core, nicam_default);
 367                 break;
 368         };
 369
 370         mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS;
 371         set_audio_finish(core, mode);
 372 }
 373
 374 static void set_audio_standard_A2(struct cx88_core *core, u32 mode)
 375 {
 376         static const struct rlist a2_bgdk_common[] = {
 377                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 378                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
 379                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
 380                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
 381                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 382                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 383                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 384                 {AUD_QAM_MODE, 0x05},
 385                 {AUD_PHACC_FREQ_8MSB, 0x34},
 386                 {AUD_PHACC_FREQ_8LSB, 0x4c},
 387                 {AUD_RATE_ADJ1, 0x00000100},
 388                 {AUD_RATE_ADJ2, 0x00000200},
 389                 {AUD_RATE_ADJ3, 0x00000300},
 390                 {AUD_RATE_ADJ4, 0x00000400},
 391                 {AUD_RATE_ADJ5, 0x00000500},
 392                 {AUD_THR_FR, 0x00000000},
 393                 {AAGC_HYST, 0x0000001a},
 394                 {AUD_PILOT_BQD_1_K0, 0x0000755b},
 395                 {AUD_PILOT_BQD_1_K1, 0x00551340},
 396                 {AUD_PILOT_BQD_1_K2, 0x006d30be},
 397                 {AUD_PILOT_BQD_1_K3, 0xffd394af},
 398                 {AUD_PILOT_BQD_1_K4, 0x00400000},
 399                 {AUD_PILOT_BQD_2_K0, 0x00040000},
 400                 {AUD_PILOT_BQD_2_K1, 0x002a4841},
 401                 {AUD_PILOT_BQD_2_K2, 0x00400000},
 402                 {AUD_PILOT_BQD_2_K3, 0x00000000},
 403                 {AUD_PILOT_BQD_2_K4, 0x00000000},
 404                 {AUD_MODE_CHG_TIMER, 0x00000040},
 405                 {AUD_AFE_12DB_EN, 0x00000001},
 406                 {AUD_CORDIC_SHIFT_0, 0x00000007},
 407                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 408                 {AUD_DEEMPH0_G0, 0x00000380},
 409                 {AUD_DEEMPH1_G0, 0x00000380},
 410                 {AUD_DCOC_0_SRC, 0x0000001a},
 411                 {AUD_DCOC0_SHIFT, 0x00000000},
 412                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 413                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 414                 {AUD_DCOC_PASS_IN, 0x00000003},
 415                 {AUD_IIR3_0_SEL, 0x00000021},
 416                 {AUD_DN2_AFC, 0x00000002},
 417                 {AUD_DCOC_1_SRC, 0x0000001b},
 418                 {AUD_DCOC1_SHIFT, 0x00000000},
 419                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 420                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 421                 {AUD_IIR3_1_SEL, 0x00000023},
 422                 {AUD_RDSI_SEL, 0x00000017},
 423                 {AUD_RDSI_SHIFT, 0x00000000},
 424                 {AUD_RDSQ_SEL, 0x00000017},
 425                 {AUD_RDSQ_SHIFT, 0x00000000},
 426                 {AUD_PLL_INT, 0x0000001e},
 427                 {AUD_PLL_DDS, 0x00000000},
 428                 {AUD_PLL_FRAC, 0x0000e542},
 429                 {AUD_POLYPH80SCALEFAC, 0x00000001},
 430                 {AUD_START_TIMER, 0x00000000},
 431                 { /* end of list */ },
 432         };
 433
 434         static const struct rlist a2_bg[] = {
 435                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 436                 {AUD_C1_UP_THR, 0x00007000},
 437                 {AUD_C1_LO_THR, 0x00005400},
 438                 {AUD_C2_UP_THR, 0x00005400},
 439                 {AUD_C2_LO_THR, 0x00003000},
 440                 { /* end of list */ },
 441         };
 442
 443         static const struct rlist a2_dk[] = {
 444                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 445                 {AUD_C1_UP_THR, 0x00007000},
 446                 {AUD_C1_LO_THR, 0x00005400},
 447                 {AUD_C2_UP_THR, 0x00005400},
 448                 {AUD_C2_LO_THR, 0x00003000},
 449                 {AUD_DN0_FREQ, 0x00003a1c},
 450                 {AUD_DN2_FREQ, 0x0000d2e0},
 451                 { /* end of list */ },
 452         };
 453
 454         static const struct rlist a1_i[] = {
 455                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 456                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
 457                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
 458                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
 459                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 460                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 461                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 462                 {AUD_QAM_MODE, 0x05},
 463                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 464                 {AUD_PHACC_FREQ_8LSB, 0x93},
 465                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 466                 {AUD_PLL_INT, 0x0000001e},
 467                 {AUD_PLL_DDS, 0x00000004},
 468                 {AUD_PLL_FRAC, 0x0000e542},
 469                 {AUD_RATE_ADJ1, 0x00000100},
 470                 {AUD_RATE_ADJ2, 0x00000200},
 471                 {AUD_RATE_ADJ3, 0x00000300},
 472                 {AUD_RATE_ADJ4, 0x00000400},
 473                 {AUD_RATE_ADJ5, 0x00000500},
 474                 {AUD_THR_FR, 0x00000000},
 475                 {AUD_PILOT_BQD_1_K0, 0x0000755b},
 476                 {AUD_PILOT_BQD_1_K1, 0x00551340},
 477                 {AUD_PILOT_BQD_1_K2, 0x006d30be},
 478                 {AUD_PILOT_BQD_1_K3, 0xffd394af},
 479                 {AUD_PILOT_BQD_1_K4, 0x00400000},
 480                 {AUD_PILOT_BQD_2_K0, 0x00040000},
 481                 {AUD_PILOT_BQD_2_K1, 0x002a4841},
 482                 {AUD_PILOT_BQD_2_K2, 0x00400000},
 483                 {AUD_PILOT_BQD_2_K3, 0x00000000},
 484                 {AUD_PILOT_BQD_2_K4, 0x00000000},
 485                 {AUD_MODE_CHG_TIMER, 0x00000060},
 486                 {AUD_AFE_12DB_EN, 0x00000001},
 487                 {AAGC_HYST, 0x0000000a},
 488                 {AUD_CORDIC_SHIFT_0, 0x00000007},
 489                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 490                 {AUD_C1_UP_THR, 0x00007000},
 491                 {AUD_C1_LO_THR, 0x00005400},
 492                 {AUD_C2_UP_THR, 0x00005400},
 493                 {AUD_C2_LO_THR, 0x00003000},
 494                 {AUD_DCOC_0_SRC, 0x0000001a},
 495                 {AUD_DCOC0_SHIFT, 0x00000000},
 496                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 497                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 498                 {AUD_DCOC_PASS_IN, 0x00000003},
 499                 {AUD_IIR3_0_SEL, 0x00000021},
 500                 {AUD_DN2_AFC, 0x00000002},
 501                 {AUD_DCOC_1_SRC, 0x0000001b},
 502                 {AUD_DCOC1_SHIFT, 0x00000000},
 503                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 504                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 505                 {AUD_IIR3_1_SEL, 0x00000023},
 506                 {AUD_DN0_FREQ, 0x000035a3},
 507                 {AUD_DN2_FREQ, 0x000029c7},
 508                 {AUD_CRDC0_SRC_SEL, 0x00000511},
 509                 {AUD_IIR1_0_SEL, 0x00000001},
 510                 {AUD_IIR1_1_SEL, 0x00000000},
 511                 {AUD_IIR3_2_SEL, 0x00000003},
 512                 {AUD_IIR3_2_SHIFT, 0x00000000},
 513                 {AUD_IIR3_0_SEL, 0x00000002},
 514                 {AUD_IIR2_0_SEL, 0x00000021},
 515                 {AUD_IIR2_0_SHIFT, 0x00000002},
 516                 {AUD_DEEMPH0_SRC_SEL, 0x0000000b},
 517                 {AUD_DEEMPH1_SRC_SEL, 0x0000000b},
 518                 {AUD_POLYPH80SCALEFAC, 0x00000001},
 519                 {AUD_START_TIMER, 0x00000000},
 520                 { /* end of list */ },
 521         };
 522
 523         static const struct rlist am_l[] = {
 524                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 525                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
 526                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
 527                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
 528                 {AUD_PDF_DDS_CNST_BYTE2, 0x48},
 529                 {AUD_PDF_DDS_CNST_BYTE1, 0x3D},
 530                 {AUD_QAM_MODE, 0x00},
 531                 {AUD_PDF_DDS_CNST_BYTE0, 0xf5},
 532                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 533                 {AUD_PHACC_FREQ_8LSB, 0x4a},
 534                 {AUD_DEEMPHGAIN_R, 0x00006680},
 535                 {AUD_DEEMPHNUMER1_R, 0x000353DE},
 536                 {AUD_DEEMPHNUMER2_R, 0x000001B1},
 537                 {AUD_DEEMPHDENOM1_R, 0x0000F3D0},
 538                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 539                 {AUD_FM_MODE_ENABLE, 0x00000007},
 540                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 541                 {AUD_AFE_12DB_EN, 0x00000001},
 542                 {AAGC_GAIN, 0x00000000},
 543                 {AAGC_HYST, 0x00000018},
 544                 {AAGC_DEF, 0x00000020},
 545                 {AUD_DN0_FREQ, 0x00000000},
 546                 {AUD_POLY0_DDS_CONSTANT, 0x000E4DB2},
 547                 {AUD_DCOC_0_SRC, 0x00000021},
 548                 {AUD_IIR1_0_SEL, 0x00000000},
 549                 {AUD_IIR1_0_SHIFT, 0x00000007},
 550                 {AUD_IIR1_1_SEL, 0x00000002},
 551                 {AUD_IIR1_1_SHIFT, 0x00000000},
 552                 {AUD_DCOC_1_SRC, 0x00000003},
 553                 {AUD_DCOC1_SHIFT, 0x00000000},
 554                 {AUD_DCOC_PASS_IN, 0x00000000},
 555                 {AUD_IIR1_2_SEL, 0x00000023},
 556                 {AUD_IIR1_2_SHIFT, 0x00000000},
 557                 {AUD_IIR1_3_SEL, 0x00000004},
 558                 {AUD_IIR1_3_SHIFT, 0x00000007},
 559                 {AUD_IIR1_4_SEL, 0x00000005},
 560                 {AUD_IIR1_4_SHIFT, 0x00000007},
 561                 {AUD_IIR3_0_SEL, 0x00000007},
 562                 {AUD_IIR3_0_SHIFT, 0x00000000},
 563                 {AUD_DEEMPH0_SRC_SEL, 0x00000011},
 564                 {AUD_DEEMPH0_SHIFT, 0x00000000},
 565                 {AUD_DEEMPH0_G0, 0x00007000},
 566                 {AUD_DEEMPH0_A0, 0x00000000},
 567                 {AUD_DEEMPH0_B0, 0x00000000},
 568                 {AUD_DEEMPH0_A1, 0x00000000},
 569                 {AUD_DEEMPH0_B1, 0x00000000},
 570                 {AUD_DEEMPH1_SRC_SEL, 0x00000011},
 571                 {AUD_DEEMPH1_SHIFT, 0x00000000},
 572                 {AUD_DEEMPH1_G0, 0x00007000},
 573                 {AUD_DEEMPH1_A0, 0x00000000},
 574                 {AUD_DEEMPH1_B0, 0x00000000},
 575                 {AUD_DEEMPH1_A1, 0x00000000},
 576                 {AUD_DEEMPH1_B1, 0x00000000},
 577                 {AUD_OUT0_SEL, 0x0000003F},
 578                 {AUD_OUT1_SEL, 0x0000003F},
 579                 {AUD_DMD_RA_DDS, 0x00F5C285},
 580                 {AUD_PLL_INT, 0x0000001E},
 581                 {AUD_PLL_DDS, 0x00000000},
 582                 {AUD_PLL_FRAC, 0x0000E542},
 583                 {AUD_RATE_ADJ1, 0x00000100},
 584                 {AUD_RATE_ADJ2, 0x00000200},
 585                 {AUD_RATE_ADJ3, 0x00000300},
 586                 {AUD_RATE_ADJ4, 0x00000400},
 587                 {AUD_RATE_ADJ5, 0x00000500},
 588                 {AUD_RATE_THRES_DMD, 0x000000C0},
 589                 { /* end of list */ },
 590         };
 591
 592         static const struct rlist a2_deemph50[] = {
 593                 {AUD_DEEMPH0_G0, 0x00000380},
 594                 {AUD_DEEMPH1_G0, 0x00000380},
 595                 {AUD_DEEMPHGAIN_R, 0x000011e1},
 596                 {AUD_DEEMPHNUMER1_R, 0x0002a7bc},
 597                 {AUD_DEEMPHNUMER2_R, 0x0003023c},
 598                 { /* end of list */ },
 599         };
 600
 601         set_audio_start(core, SEL_A2);
 602         switch (core->tvaudio) {
 603         case WW_BG:
 604                 dprintk("%s PAL-BG A1/2 (status: known-good)\n", __FUNCTION__);
 605                 set_audio_registers(core, a2_bgdk_common);
 606                 set_audio_registers(core, a2_bg);
 607                 set_audio_registers(core, a2_deemph50);
 608                 break;
 609         case WW_DK:
 610                 dprintk("%s PAL-DK A1/2 (status: known-good)\n", __FUNCTION__);
 611                 set_audio_registers(core, a2_bgdk_common);
 612                 set_audio_registers(core, a2_dk);
 613                 set_audio_registers(core, a2_deemph50);
 614                 break;
 615         case WW_I:
 616                 dprintk("%s PAL-I A1 (status: known-good)\n", __FUNCTION__);
 617                 set_audio_registers(core, a1_i);
 618                 set_audio_registers(core, a2_deemph50);
 619                 break;
 620         case WW_L:
 621                 dprintk("%s AM-L (status: devel)\n", __FUNCTION__);
 622                 set_audio_registers(core, am_l);
 623                 break;
 624         default:
 625                 dprintk("%s Warning: wrong value\n", __FUNCTION__);
 626                 return;
 627                 break;
 628         };
 629
 630         mode |= EN_FMRADIO_EN_RDS | EN_DMTRX_SUMDIFF;
 631         set_audio_finish(core, mode);
 632 }
 633
 634 static void set_audio_standard_EIAJ(struct cx88_core *core)
 635 {
 636         static const struct rlist eiaj[] = {
 637                 /* TODO: eiaj register settings are not there yet ... */
 638
 639                 { /* end of list */ },
 640         };
 641         dprintk("%s (status: unknown)\n", __FUNCTION__);
 642
 643         set_audio_start(core, SEL_EIAJ);
 644         set_audio_registers(core, eiaj);
 645         set_audio_finish(core, EN_EIAJ_AUTO_STEREO);
 646 }
 647
 648 static void set_audio_standard_FM(struct cx88_core *core,
 649                                   enum cx88_deemph_type deemph)
 650 {
 651         static const struct rlist fm_deemph_50[] = {
 652                 {AUD_DEEMPH0_G0, 0x0C45},
 653                 {AUD_DEEMPH0_A0, 0x6262},
 654                 {AUD_DEEMPH0_B0, 0x1C29},
 655                 {AUD_DEEMPH0_A1, 0x3FC66},
 656                 {AUD_DEEMPH0_B1, 0x399A},
 657
 658                 {AUD_DEEMPH1_G0, 0x0D80},
 659                 {AUD_DEEMPH1_A0, 0x6262},
 660                 {AUD_DEEMPH1_B0, 0x1C29},
 661                 {AUD_DEEMPH1_A1, 0x3FC66},
 662                 {AUD_DEEMPH1_B1, 0x399A},
 663
 664                 {AUD_POLYPH80SCALEFAC, 0x0003},
 665                 { /* end of list */ },
 666         };
 667         static const struct rlist fm_deemph_75[] = {
 668                 {AUD_DEEMPH0_G0, 0x091B},
 669                 {AUD_DEEMPH0_A0, 0x6B68},
 670                 {AUD_DEEMPH0_B0, 0x11EC},
 671                 {AUD_DEEMPH0_A1, 0x3FC66},
 672                 {AUD_DEEMPH0_B1, 0x399A},
 673
 674                 {AUD_DEEMPH1_G0, 0x0AA0},
 675                 {AUD_DEEMPH1_A0, 0x6B68},
 676                 {AUD_DEEMPH1_B0, 0x11EC},
 677                 {AUD_DEEMPH1_A1, 0x3FC66},
 678                 {AUD_DEEMPH1_B1, 0x399A},
 679
 680                 {AUD_POLYPH80SCALEFAC, 0x0003},
 681                 { /* end of list */ },
 682         };
 683
 684         /* It is enough to leave default values? */
 685         /* No, it's not!  The deemphasis registers are reset to the 75us
 686          * values by default.  Analyzing the spectrum of the decoded audio
 687          * reveals that "no deemphasis" is the same as 75 us, while the 50 us
 688          * setting results in less deemphasis.  */
 689         static const struct rlist fm_no_deemph[] = {
 690
 691                 {AUD_POLYPH80SCALEFAC, 0x0003},
 692                 { /* end of list */ },
 693         };
 694
 695         dprintk("%s (status: unknown)\n", __FUNCTION__);
 696         set_audio_start(core, SEL_FMRADIO);
 697
 698         switch (deemph) {
 699         default:
 700         case FM_NO_DEEMPH:
 701                 set_audio_registers(core, fm_no_deemph);
 702                 break;
 703
 704         case FM_DEEMPH_50:
 705                 set_audio_registers(core, fm_deemph_50);
 706                 break;
 707
 708         case FM_DEEMPH_75:
 709                 set_audio_registers(core, fm_deemph_75);
 710                 break;
 711         }
 712
 713         set_audio_finish(core, EN_FMRADIO_AUTO_STEREO);
 714 }
 715
 716 /* ----------------------------------------------------------- */
 717
 718 static int cx88_detect_nicam(struct cx88_core *core)
 719 {
 720         int i, j = 0;
 721
 722         dprintk("start nicam autodetect.\n");
 723
 724         for (i = 0; i < 6; i++) {
 725                 /* if bit1=1 then nicam is detected */
 726                 j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1);
 727
 728                 if (j == 1) {
 729                         dprintk("nicam is detected.\n");
 730                         return 1;
 731                 }
 732
 733                 /* wait a little bit for next reading status */
 734                 msleep(10);
 735         }
 736
 737         dprintk("nicam is not detected.\n");
 738         return 0;
 739 }
 740
 741 void cx88_set_tvaudio(struct cx88_core *core)
 742 {
 743         switch (core->tvaudio) {
 744         case WW_BTSC:
 745                 set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
 746                 break;
 747         case WW_BG:
 748         case WW_DK:
 749         case WW_I:
 750         case WW_L:
 751                 /* prepare all dsp registers */
 752                 set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 753
 754                 /* set nicam mode - otherwise
 755                    AUD_NICAM_STATUS2 contains wrong values */
 756                 set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO);
 757                 if (0 == cx88_detect_nicam(core)) {
 758                         /* fall back to fm / am mono */
 759                         set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 760                         core->use_nicam = 0;
 761                 } else {
 762                         core->use_nicam = 1;
 763                 }
 764                 break;
 765         case WW_EIAJ:
 766                 set_audio_standard_EIAJ(core);
 767                 break;
 768         case WW_FM:
 769                 set_audio_standard_FM(core, radio_deemphasis);
 770                 break;
 771         case WW_NONE:
 772         default:
 773                 printk("%s/0: unknown tv audio mode [%d]\n",
 774                        core->name, core->tvaudio);
 775                 break;
 776         }
 777         return;
 778 }
 779
 780 void cx88_newstation(struct cx88_core *core)
 781 {
 782         core->audiomode_manual = UNSET;
 783 }
 784
 785 void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
 786 {
 787         static char *m[] = { "stereo", "dual mono", "mono", "sap" };
 788         static char *p[] = { "no pilot", "pilot c1", "pilot c2", "?" };
 789         u32 reg, mode, pilot;
 790
 791         reg = cx_read(AUD_STATUS);
 792         mode = reg & 0x03;
 793         pilot = (reg >> 2) & 0x03;
 794
 795         if (core->astat != reg)
 796                 dprintk("AUD_STATUS: 0x%x [%s/%s] ctl=%s\n",
 797                         reg, m[mode], p[pilot],
 798                         aud_ctl_names[cx_read(AUD_CTL) & 63]);
 799         core->astat = reg;
 800
 801 /* TODO
 802        Reading from AUD_STATUS is not enough
 803        for auto-detecting sap/dual-fm/nicam.
 804        Add some code here later.
 805 */
 806
 807         return;
 808 }
 809
 810 void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 811 {
 812         u32 ctl = UNSET;
 813         u32 mask = UNSET;
 814
 815         if (manual) {
 816                 core->audiomode_manual = mode;
 817         } else {
 818                 if (UNSET != core->audiomode_manual)
 819                         return;
 820         }
 821         core->audiomode_current = mode;
 822
 823         switch (core->tvaudio) {
 824         case WW_BTSC:
 825                 switch (mode) {
 826                 case V4L2_TUNER_MODE_MONO:
 827                         set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_MONO);
 828                         break;
 829                 case V4L2_TUNER_MODE_LANG1:
 830                         set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
 831                         break;
 832                 case V4L2_TUNER_MODE_LANG2:
 833                         set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
 834                         break;
 835                 case V4L2_TUNER_MODE_STEREO:
 836                 case V4L2_TUNER_MODE_LANG1_LANG2:
 837                         set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
 838                         break;
 839                 }
 840                 break;
 841         case WW_BG:
 842         case WW_DK:
 843         case WW_I:
 844         case WW_L:
 845                 if (1 == core->use_nicam) {
 846                         switch (mode) {
 847                         case V4L2_TUNER_MODE_MONO:
 848                         case V4L2_TUNER_MODE_LANG1:
 849                                 set_audio_standard_NICAM(core,
 850                                                          EN_NICAM_FORCE_MONO1);
 851                                 break;
 852                         case V4L2_TUNER_MODE_LANG2:
 853                                 set_audio_standard_NICAM(core,
 854                                                          EN_NICAM_FORCE_MONO2);
 855                                 break;
 856                         case V4L2_TUNER_MODE_STEREO:
 857                         case V4L2_TUNER_MODE_LANG1_LANG2:
 858                                 set_audio_standard_NICAM(core,
 859                                                          EN_NICAM_FORCE_STEREO);
 860                                 break;
 861                         }
 862                 } else {
 863                         if ((core->tvaudio == WW_I) || (core->tvaudio == WW_L)) {
 864                                 /* fall back to fm / am mono */
 865                                 set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 866                         } else {
 867                                 /* TODO: Add A2 autodection */
 868                                 switch (mode) {
 869                                 case V4L2_TUNER_MODE_MONO:
 870                                 case V4L2_TUNER_MODE_LANG1:
 871                                         set_audio_standard_A2(core,
 872                                                               EN_A2_FORCE_MONO1);
 873                                         break;
 874                                 case V4L2_TUNER_MODE_LANG2:
 875                                         set_audio_standard_A2(core,
 876                                                               EN_A2_FORCE_MONO2);
 877                                         break;
 878                                 case V4L2_TUNER_MODE_STEREO:
 879                                 case V4L2_TUNER_MODE_LANG1_LANG2:
 880                                         set_audio_standard_A2(core,
 881                                                               EN_A2_FORCE_STEREO);
 882                                         break;
 883                                 }
 884                         }
 885                 }
 886                 break;
 887         case WW_FM:
 888                 switch (mode) {
 889                 case V4L2_TUNER_MODE_MONO:
 890                         ctl = EN_FMRADIO_FORCE_MONO;
 891                         mask = 0x3f;
 892                         break;
 893                 case V4L2_TUNER_MODE_STEREO:
 894                         ctl = EN_FMRADIO_AUTO_STEREO;
 895                         mask = 0x3f;
 896                         break;
 897                 }
 898                 break;
 899         }
 900
 901         if (UNSET != ctl) {
 902                 dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
 903                         "[status=0x%x,ctl=0x%x,vol=0x%x]\n",
 904                         mask, ctl, cx_read(AUD_STATUS),
 905                         cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
 906                 cx_andor(AUD_CTL, mask, ctl);
 907         }
 908         return;
 909 }
 910
 911 int cx88_audio_thread(void *data)
 912 {
 913         struct cx88_core *core = data;
 914         struct v4l2_tuner t;
 915         u32 mode = 0;
 916
 917         dprintk("cx88: tvaudio thread started\n");
 918         set_freezable();
 919         for (;;) {
 920                 msleep_interruptible(1000);
 921                 if (kthread_should_stop())
 922                         break;
 923                 try_to_freeze();
 924
 925                 /* just monitor the audio status for now ... */
 926                 memset(&t, 0, sizeof(t));
 927                 cx88_get_stereo(core, &t);
 928
 929                 if (UNSET != core->audiomode_manual)
 930                         /* manually set, don't do anything. */
 931                         continue;
 932
 933                 /* monitor signal */
 934                 if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
 935                         mode = V4L2_TUNER_MODE_STEREO;
 936                 else
 937                         mode = V4L2_TUNER_MODE_MONO;
 938                 if (mode == core->audiomode_current)
 939                         continue;
 940
 941                 /* automatically switch to best available mode */
 942                 cx88_set_stereo(core, mode, 0);
 943         }
 944
 945         dprintk("cx88: tvaudio thread exiting\n");
 946         return 0;
 947 }
 948
 949 /* ----------------------------------------------------------- */
 950
 951 EXPORT_SYMBOL(cx88_set_tvaudio);
 952 EXPORT_SYMBOL(cx88_newstation);
 953 EXPORT_SYMBOL(cx88_set_stereo);
 954 EXPORT_SYMBOL(cx88_get_stereo);
 955 EXPORT_SYMBOL(cx88_audio_thread);
 956
 957 /*
 958  * Local variables:
 959  * c-basic-offset: 8
 960  * End:
 961  * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
 962  */