err.no Git - linux-2.6/blob - drivers/media/video/cx88/cx88-core.c

   1 /*
   2  *
   3  * device driver for Conexant 2388x based TV cards
   4  * driver core
   5  *
   6  * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
   7  *
   8  * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
   9  *     - Multituner support
  10  *     - video_ioctl2 conversion
  11  *     - PAL/M fixes
  12  *
  13  *  This program is free software; you can redistribute it and/or modify
  14  *  it under the terms of the GNU General Public License as published by
  15  *  the Free Software Foundation; either version 2 of the License, or
  16  *  (at your option) any later version.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License
  24  *  along with this program; if not, write to the Free Software
  25  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/init.h>
  29 #include <linux/list.h>
  30 #include <linux/module.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/kmod.h>
  34 #include <linux/sound.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/pci.h>
  37 #include <linux/delay.h>
  38 #include <linux/videodev2.h>
  39 #include <linux/mutex.h>
  40
  41 #include "cx88.h"
  42 #include <media/v4l2-common.h>
  43
  44 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
  45 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
  46 MODULE_LICENSE("GPL");
  47
  48 /* ------------------------------------------------------------------ */
  49
  50 static unsigned int core_debug = 0;
  51 module_param(core_debug,int,0644);
  52 MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
  53
  54 static unsigned int nicam = 0;
  55 module_param(nicam,int,0644);
  56 MODULE_PARM_DESC(nicam,"tv audio is nicam");
  57
  58 static unsigned int nocomb = 0;
  59 module_param(nocomb,int,0644);
  60 MODULE_PARM_DESC(nocomb,"disable comb filter");
  61
  62 #define dprintk(level,fmt, arg...)      if (core_debug >= level)        \
  63         printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
  64
  65 static unsigned int cx88_devcount;
  66 static LIST_HEAD(cx88_devlist);
  67 static DEFINE_MUTEX(devlist);
  68
  69 #define NO_SYNC_LINE (-1U)
  70
  71 /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
  72          generated _after_ lpi lines are transferred. */
  73 static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
  74                             unsigned int offset, u32 sync_line,
  75                             unsigned int bpl, unsigned int padding,
  76                             unsigned int lines, unsigned int lpi)
  77 {
  78         struct scatterlist *sg;
  79         unsigned int line,todo,sol;
  80
  81         /* sync instruction */
  82         if (sync_line != NO_SYNC_LINE)
  83                 *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
  84
  85         /* scan lines */
  86         sg = sglist;
  87         for (line = 0; line < lines; line++) {
  88                 while (offset && offset >= sg_dma_len(sg)) {
  89                         offset -= sg_dma_len(sg);
  90                         sg++;
  91                 }
  92                 if (lpi && line>0 && !(line % lpi))
  93                         sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
  94                 else
  95                         sol = RISC_SOL;
  96                 if (bpl <= sg_dma_len(sg)-offset) {
  97                         /* fits into current chunk */
  98                         *(rp++)=cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl);
  99                         *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
 100                         offset+=bpl;
 101                 } else {
 102                         /* scanline needs to be split */
 103                         todo = bpl;
 104                         *(rp++)=cpu_to_le32(RISC_WRITE|sol|
 105                                             (sg_dma_len(sg)-offset));
 106                         *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
 107                         todo -= (sg_dma_len(sg)-offset);
 108                         offset = 0;
 109                         sg++;
 110                         while (todo > sg_dma_len(sg)) {
 111                                 *(rp++)=cpu_to_le32(RISC_WRITE|
 112                                                     sg_dma_len(sg));
 113                                 *(rp++)=cpu_to_le32(sg_dma_address(sg));
 114                                 todo -= sg_dma_len(sg);
 115                                 sg++;
 116                         }
 117                         *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
 118                         *(rp++)=cpu_to_le32(sg_dma_address(sg));
 119                         offset += todo;
 120                 }
 121                 offset += padding;
 122         }
 123
 124         return rp;
 125 }
 126
 127 int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 128                      struct scatterlist *sglist,
 129                      unsigned int top_offset, unsigned int bottom_offset,
 130                      unsigned int bpl, unsigned int padding, unsigned int lines)
 131 {
 132         u32 instructions,fields;
 133         u32 *rp;
 134         int rc;
 135
 136         fields = 0;
 137         if (UNSET != top_offset)
 138                 fields++;
 139         if (UNSET != bottom_offset)
 140                 fields++;
 141
 142         /* estimate risc mem: worst case is one write per page border +
 143            one write per scan line + syncs + jump (all 2 dwords).  Padding
 144            can cause next bpl to start close to a page border.  First DMA
 145            region may be smaller than PAGE_SIZE */
 146         instructions  = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
 147         instructions += 2;
 148         if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 149                 return rc;
 150
 151         /* write risc instructions */
 152         rp = risc->cpu;
 153         if (UNSET != top_offset)
 154                 rp = cx88_risc_field(rp, sglist, top_offset, 0,
 155                                      bpl, padding, lines, 0);
 156         if (UNSET != bottom_offset)
 157                 rp = cx88_risc_field(rp, sglist, bottom_offset, 0x200,
 158                                      bpl, padding, lines, 0);
 159
 160         /* save pointer to jmp instruction address */
 161         risc->jmp = rp;
 162         BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
 163         return 0;
 164 }
 165
 166 int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 167                          struct scatterlist *sglist, unsigned int bpl,
 168                          unsigned int lines, unsigned int lpi)
 169 {
 170         u32 instructions;
 171         u32 *rp;
 172         int rc;
 173
 174         /* estimate risc mem: worst case is one write per page border +
 175            one write per scan line + syncs + jump (all 2 dwords).  Here
 176            there is no padding and no sync.  First DMA region may be smaller
 177            than PAGE_SIZE */
 178         instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
 179         instructions += 1;
 180         if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 181                 return rc;
 182
 183         /* write risc instructions */
 184         rp = risc->cpu;
 185         rp = cx88_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines, lpi);
 186
 187         /* save pointer to jmp instruction address */
 188         risc->jmp = rp;
 189         BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size);
 190         return 0;
 191 }
 192
 193 int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
 194                       u32 reg, u32 mask, u32 value)
 195 {
 196         u32 *rp;
 197         int rc;
 198
 199         if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
 200                 return rc;
 201
 202         /* write risc instructions */
 203         rp = risc->cpu;
 204         *(rp++) = cpu_to_le32(RISC_WRITECR  | RISC_IRQ2 | RISC_IMM);
 205         *(rp++) = cpu_to_le32(reg);
 206         *(rp++) = cpu_to_le32(value);
 207         *(rp++) = cpu_to_le32(mask);
 208         *(rp++) = cpu_to_le32(RISC_JUMP);
 209         *(rp++) = cpu_to_le32(risc->dma);
 210         return 0;
 211 }
 212
 213 void
 214 cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
 215 {
 216         BUG_ON(in_interrupt());
 217         videobuf_waiton(&buf->vb,0,0);
 218         videobuf_dma_unmap(q, &buf->vb.dma);
 219         videobuf_dma_free(&buf->vb.dma);
 220         btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
 221         buf->vb.state = STATE_NEEDS_INIT;
 222 }
 223
 224 /* ------------------------------------------------------------------ */
 225 /* our SRAM memory layout                                             */
 226
 227 /* we are going to put all thr risc programs into host memory, so we
 228  * can use the whole SDRAM for the DMA fifos.  To simplify things, we
 229  * use a static memory layout.  That surely will waste memory in case
 230  * we don't use all DMA channels at the same time (which will be the
 231  * case most of the time).  But that still gives us enougth FIFO space
 232  * to be able to deal with insane long pci latencies ...
 233  *
 234  * FIFO space allocations:
 235  *    channel  21    (y video)  - 10.0k
 236  *    channel  22    (u video)  -  2.0k
 237  *    channel  23    (v video)  -  2.0k
 238  *    channel  24    (vbi)      -  4.0k
 239  *    channels 25+26 (audio)    -  4.0k
 240  *    channel  28    (mpeg)     -  4.0k
 241  *    TOTAL                     = 29.0k
 242  *
 243  * Every channel has 160 bytes control data (64 bytes instruction
 244  * queue and 6 CDT entries), which is close to 2k total.
 245  *
 246  * Address layout:
 247  *    0x0000 - 0x03ff    CMDs / reserved
 248  *    0x0400 - 0x0bff    instruction queues + CDs
 249  *    0x0c00 -           FIFOs
 250  */
 251
 252 struct sram_channel cx88_sram_channels[] = {
 253         [SRAM_CH21] = {
 254                 .name       = "video y / packed",
 255                 .cmds_start = 0x180040,
 256                 .ctrl_start = 0x180400,
 257                 .cdt        = 0x180400 + 64,
 258                 .fifo_start = 0x180c00,
 259                 .fifo_size  = 0x002800,
 260                 .ptr1_reg   = MO_DMA21_PTR1,
 261                 .ptr2_reg   = MO_DMA21_PTR2,
 262                 .cnt1_reg   = MO_DMA21_CNT1,
 263                 .cnt2_reg   = MO_DMA21_CNT2,
 264         },
 265         [SRAM_CH22] = {
 266                 .name       = "video u",
 267                 .cmds_start = 0x180080,
 268                 .ctrl_start = 0x1804a0,
 269                 .cdt        = 0x1804a0 + 64,
 270                 .fifo_start = 0x183400,
 271                 .fifo_size  = 0x000800,
 272                 .ptr1_reg   = MO_DMA22_PTR1,
 273                 .ptr2_reg   = MO_DMA22_PTR2,
 274                 .cnt1_reg   = MO_DMA22_CNT1,
 275                 .cnt2_reg   = MO_DMA22_CNT2,
 276         },
 277         [SRAM_CH23] = {
 278                 .name       = "video v",
 279                 .cmds_start = 0x1800c0,
 280                 .ctrl_start = 0x180540,
 281                 .cdt        = 0x180540 + 64,
 282                 .fifo_start = 0x183c00,
 283                 .fifo_size  = 0x000800,
 284                 .ptr1_reg   = MO_DMA23_PTR1,
 285                 .ptr2_reg   = MO_DMA23_PTR2,
 286                 .cnt1_reg   = MO_DMA23_CNT1,
 287                 .cnt2_reg   = MO_DMA23_CNT2,
 288         },
 289         [SRAM_CH24] = {
 290                 .name       = "vbi",
 291                 .cmds_start = 0x180100,
 292                 .ctrl_start = 0x1805e0,
 293                 .cdt        = 0x1805e0 + 64,
 294                 .fifo_start = 0x184400,
 295                 .fifo_size  = 0x001000,
 296                 .ptr1_reg   = MO_DMA24_PTR1,
 297                 .ptr2_reg   = MO_DMA24_PTR2,
 298                 .cnt1_reg   = MO_DMA24_CNT1,
 299                 .cnt2_reg   = MO_DMA24_CNT2,
 300         },
 301         [SRAM_CH25] = {
 302                 .name       = "audio from",
 303                 .cmds_start = 0x180140,
 304                 .ctrl_start = 0x180680,
 305                 .cdt        = 0x180680 + 64,
 306                 .fifo_start = 0x185400,
 307                 .fifo_size  = 0x001000,
 308                 .ptr1_reg   = MO_DMA25_PTR1,
 309                 .ptr2_reg   = MO_DMA25_PTR2,
 310                 .cnt1_reg   = MO_DMA25_CNT1,
 311                 .cnt2_reg   = MO_DMA25_CNT2,
 312         },
 313         [SRAM_CH26] = {
 314                 .name       = "audio to",
 315                 .cmds_start = 0x180180,
 316                 .ctrl_start = 0x180720,
 317                 .cdt        = 0x180680 + 64,  /* same as audio IN */
 318                 .fifo_start = 0x185400,       /* same as audio IN */
 319                 .fifo_size  = 0x001000,       /* same as audio IN */
 320                 .ptr1_reg   = MO_DMA26_PTR1,
 321                 .ptr2_reg   = MO_DMA26_PTR2,
 322                 .cnt1_reg   = MO_DMA26_CNT1,
 323                 .cnt2_reg   = MO_DMA26_CNT2,
 324         },
 325         [SRAM_CH28] = {
 326                 .name       = "mpeg",
 327                 .cmds_start = 0x180200,
 328                 .ctrl_start = 0x1807C0,
 329                 .cdt        = 0x1807C0 + 64,
 330                 .fifo_start = 0x186400,
 331                 .fifo_size  = 0x001000,
 332                 .ptr1_reg   = MO_DMA28_PTR1,
 333                 .ptr2_reg   = MO_DMA28_PTR2,
 334                 .cnt1_reg   = MO_DMA28_CNT1,
 335                 .cnt2_reg   = MO_DMA28_CNT2,
 336         },
 337 };
 338
 339 int cx88_sram_channel_setup(struct cx88_core *core,
 340                             struct sram_channel *ch,
 341                             unsigned int bpl, u32 risc)
 342 {
 343         unsigned int i,lines;
 344         u32 cdt;
 345
 346         bpl   = (bpl + 7) & ~7; /* alignment */
 347         cdt   = ch->cdt;
 348         lines = ch->fifo_size / bpl;
 349         if (lines > 6)
 350                 lines = 6;
 351         BUG_ON(lines < 2);
 352
 353         /* write CDT */
 354         for (i = 0; i < lines; i++)
 355                 cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
 356
 357         /* write CMDS */
 358         cx_write(ch->cmds_start +  0, risc);
 359         cx_write(ch->cmds_start +  4, cdt);
 360         cx_write(ch->cmds_start +  8, (lines*16) >> 3);
 361         cx_write(ch->cmds_start + 12, ch->ctrl_start);
 362         cx_write(ch->cmds_start + 16, 64 >> 2);
 363         for (i = 20; i < 64; i += 4)
 364                 cx_write(ch->cmds_start + i, 0);
 365
 366         /* fill registers */
 367         cx_write(ch->ptr1_reg, ch->fifo_start);
 368         cx_write(ch->ptr2_reg, cdt);
 369         cx_write(ch->cnt1_reg, (bpl >> 3) -1);
 370         cx_write(ch->cnt2_reg, (lines*16) >> 3);
 371
 372         dprintk(2,"sram setup %s: bpl=%d lines=%d\n", ch->name, bpl, lines);
 373         return 0;
 374 }
 375
 376 /* ------------------------------------------------------------------ */
 377 /* debug helper code                                                  */
 378
 379 static int cx88_risc_decode(u32 risc)
 380 {
 381         static char *instr[16] = {
 382                 [ RISC_SYNC    >> 28 ] = "sync",
 383                 [ RISC_WRITE   >> 28 ] = "write",
 384                 [ RISC_WRITEC  >> 28 ] = "writec",
 385                 [ RISC_READ    >> 28 ] = "read",
 386                 [ RISC_READC   >> 28 ] = "readc",
 387                 [ RISC_JUMP    >> 28 ] = "jump",
 388                 [ RISC_SKIP    >> 28 ] = "skip",
 389                 [ RISC_WRITERM >> 28 ] = "writerm",
 390                 [ RISC_WRITECM >> 28 ] = "writecm",
 391                 [ RISC_WRITECR >> 28 ] = "writecr",
 392         };
 393         static int incr[16] = {
 394                 [ RISC_WRITE   >> 28 ] = 2,
 395                 [ RISC_JUMP    >> 28 ] = 2,
 396                 [ RISC_WRITERM >> 28 ] = 3,
 397                 [ RISC_WRITECM >> 28 ] = 3,
 398                 [ RISC_WRITECR >> 28 ] = 4,
 399         };
 400         static char *bits[] = {
 401                 "12",   "13",   "14",   "resync",
 402                 "cnt0", "cnt1", "18",   "19",
 403                 "20",   "21",   "22",   "23",
 404                 "irq1", "irq2", "eol",  "sol",
 405         };
 406         int i;
 407
 408         printk("0x%08x [ %s", risc,
 409                instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
 410         for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
 411                 if (risc & (1 << (i + 12)))
 412                         printk(" %s",bits[i]);
 413         printk(" count=%d ]\n", risc & 0xfff);
 414         return incr[risc >> 28] ? incr[risc >> 28] : 1;
 415 }
 416
 417
 418 void cx88_sram_channel_dump(struct cx88_core *core,
 419                             struct sram_channel *ch)
 420 {
 421         static char *name[] = {
 422                 "initial risc",
 423                 "cdt base",
 424                 "cdt size",
 425                 "iq base",
 426                 "iq size",
 427                 "risc pc",
 428                 "iq wr ptr",
 429                 "iq rd ptr",
 430                 "cdt current",
 431                 "pci target",
 432                 "line / byte",
 433         };
 434         u32 risc;
 435         unsigned int i,j,n;
 436
 437         printk("%s: %s - dma channel status dump\n",
 438                core->name,ch->name);
 439         for (i = 0; i < ARRAY_SIZE(name); i++)
 440                 printk("%s:   cmds: %-12s: 0x%08x\n",
 441                        core->name,name[i],
 442                        cx_read(ch->cmds_start + 4*i));
 443         for (n = 1, i = 0; i < 4; i++) {
 444                 risc = cx_read(ch->cmds_start + 4 * (i+11));
 445                 printk("%s:   risc%d: ", core->name, i);
 446                 if (--n)
 447                         printk("0x%08x [ arg #%d ]\n", risc, n);
 448                 else
 449                         n = cx88_risc_decode(risc);
 450         }
 451         for (i = 0; i < 16; i += n) {
 452                 risc = cx_read(ch->ctrl_start + 4 * i);
 453                 printk("%s:   iq %x: ", core->name, i);
 454                 n = cx88_risc_decode(risc);
 455                 for (j = 1; j < n; j++) {
 456                         risc = cx_read(ch->ctrl_start + 4 * (i+j));
 457                         printk("%s:   iq %x: 0x%08x [ arg #%d ]\n",
 458                                core->name, i+j, risc, j);
 459                 }
 460         }
 461
 462         printk("%s: fifo: 0x%08x -> 0x%x\n",
 463                core->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
 464         printk("%s: ctrl: 0x%08x -> 0x%x\n",
 465                core->name, ch->ctrl_start, ch->ctrl_start+6*16);
 466         printk("%s:   ptr1_reg: 0x%08x\n",
 467                core->name,cx_read(ch->ptr1_reg));
 468         printk("%s:   ptr2_reg: 0x%08x\n",
 469                core->name,cx_read(ch->ptr2_reg));
 470         printk("%s:   cnt1_reg: 0x%08x\n",
 471                core->name,cx_read(ch->cnt1_reg));
 472         printk("%s:   cnt2_reg: 0x%08x\n",
 473                core->name,cx_read(ch->cnt2_reg));
 474 }
 475
 476 static char *cx88_pci_irqs[32] = {
 477         "vid", "aud", "ts", "vip", "hst", "5", "6", "tm1",
 478         "src_dma", "dst_dma", "risc_rd_err", "risc_wr_err",
 479         "brdg_err", "src_dma_err", "dst_dma_err", "ipb_dma_err",
 480         "i2c", "i2c_rack", "ir_smp", "gpio0", "gpio1"
 481 };
 482
 483 void cx88_print_irqbits(char *name, char *tag, char **strings,
 484                         int len, u32 bits, u32 mask)
 485 {
 486         unsigned int i;
 487
 488         printk(KERN_DEBUG "%s: %s [0x%x]", name, tag, bits);
 489         for (i = 0; i < len; i++) {
 490                 if (!(bits & (1 << i)))
 491                         continue;
 492                 if (strings[i])
 493                         printk(" %s", strings[i]);
 494                 else
 495                         printk(" %d", i);
 496                 if (!(mask & (1 << i)))
 497                         continue;
 498                 printk("*");
 499         }
 500         printk("\n");
 501 }
 502
 503 /* ------------------------------------------------------------------ */
 504
 505 int cx88_core_irq(struct cx88_core *core, u32 status)
 506 {
 507         int handled = 0;
 508
 509         if (status & PCI_INT_IR_SMPINT) {
 510                 cx88_ir_irq(core);
 511                 handled++;
 512         }
 513         if (!handled)
 514                 cx88_print_irqbits(core->name, "irq pci",
 515                                    cx88_pci_irqs, ARRAY_SIZE(cx88_pci_irqs),
 516                                    status, core->pci_irqmask);
 517         return handled;
 518 }
 519
 520 void cx88_wakeup(struct cx88_core *core,
 521                  struct cx88_dmaqueue *q, u32 count)
 522 {
 523         struct cx88_buffer *buf;
 524         int bc;
 525
 526         for (bc = 0;; bc++) {
 527                 if (list_empty(&q->active))
 528                         break;
 529                 buf = list_entry(q->active.next,
 530                                  struct cx88_buffer, vb.queue);
 531                 /* count comes from the hw and is is 16bit wide --
 532                  * this trick handles wrap-arounds correctly for
 533                  * up to 32767 buffers in flight... */
 534                 if ((s16) (count - buf->count) < 0)
 535                         break;
 536                 do_gettimeofday(&buf->vb.ts);
 537                 dprintk(2,"[%p/%d] wakeup reg=%d buf=%d\n",buf,buf->vb.i,
 538                         count, buf->count);
 539                 buf->vb.state = STATE_DONE;
 540                 list_del(&buf->vb.queue);
 541                 wake_up(&buf->vb.done);
 542         }
 543         if (list_empty(&q->active)) {
 544                 del_timer(&q->timeout);
 545         } else {
 546                 mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
 547         }
 548         if (bc != 1)
 549                 printk("%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc);
 550 }
 551
 552 void cx88_shutdown(struct cx88_core *core)
 553 {
 554         /* disable RISC controller + IRQs */
 555         cx_write(MO_DEV_CNTRL2, 0);
 556
 557         /* stop dma transfers */
 558         cx_write(MO_VID_DMACNTRL, 0x0);
 559         cx_write(MO_AUD_DMACNTRL, 0x0);
 560         cx_write(MO_TS_DMACNTRL, 0x0);
 561         cx_write(MO_VIP_DMACNTRL, 0x0);
 562         cx_write(MO_GPHST_DMACNTRL, 0x0);
 563
 564         /* stop interrupts */
 565         cx_write(MO_PCI_INTMSK, 0x0);
 566         cx_write(MO_VID_INTMSK, 0x0);
 567         cx_write(MO_AUD_INTMSK, 0x0);
 568         cx_write(MO_TS_INTMSK, 0x0);
 569         cx_write(MO_VIP_INTMSK, 0x0);
 570         cx_write(MO_GPHST_INTMSK, 0x0);
 571
 572         /* stop capturing */
 573         cx_write(VID_CAPTURE_CONTROL, 0);
 574 }
 575
 576 int cx88_reset(struct cx88_core *core)
 577 {
 578         dprintk(1,"%s\n",__FUNCTION__);
 579         cx88_shutdown(core);
 580
 581         /* clear irq status */
 582         cx_write(MO_VID_INTSTAT, 0xFFFFFFFF); // Clear PIV int
 583         cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int
 584         cx_write(MO_INT1_STAT,   0xFFFFFFFF); // Clear RISC int
 585
 586         /* wait a bit */
 587         msleep(100);
 588
 589         /* init sram */
 590         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21], 720*4, 0);
 591         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH22], 128, 0);
 592         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH23], 128, 0);
 593         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH24], 128, 0);
 594         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
 595         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
 596         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], 188*4, 0);
 597
 598         /* misc init ... */
 599         cx_write(MO_INPUT_FORMAT, ((1 << 13) |   // agc enable
 600                                    (1 << 12) |   // agc gain
 601                                    (1 << 11) |   // adaptibe agc
 602                                    (0 << 10) |   // chroma agc
 603                                    (0 <<  9) |   // ckillen
 604                                    (7)));
 605
 606         /* setup image format */
 607         cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000);
 608
 609         /* setup FIFO Threshholds */
 610         cx_write(MO_PDMA_STHRSH,   0x0807);
 611         cx_write(MO_PDMA_DTHRSH,   0x0807);
 612
 613         /* fixes flashing of image */
 614         cx_write(MO_AGC_SYNC_TIP1, 0x0380000F);
 615         cx_write(MO_AGC_BACK_VBI,  0x00E00555);
 616
 617         cx_write(MO_VID_INTSTAT,   0xFFFFFFFF); // Clear PIV int
 618         cx_write(MO_PCI_INTSTAT,   0xFFFFFFFF); // Clear PCI int
 619         cx_write(MO_INT1_STAT,     0xFFFFFFFF); // Clear RISC int
 620
 621         /* Reset on-board parts */
 622         cx_write(MO_SRST_IO, 0);
 623         msleep(10);
 624         cx_write(MO_SRST_IO, 1);
 625
 626         return 0;
 627 }
 628
 629 /* ------------------------------------------------------------------ */
 630
 631 static unsigned int inline norm_swidth(v4l2_std_id norm)
 632 {
 633         return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922;
 634 }
 635
 636 static unsigned int inline norm_hdelay(v4l2_std_id norm)
 637 {
 638         return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 135 : 186;
 639 }
 640
 641 static unsigned int inline norm_vdelay(v4l2_std_id norm)
 642 {
 643         return (norm & V4L2_STD_625_50) ? 0x24 : 0x18;
 644 }
 645
 646 static unsigned int inline norm_fsc8(v4l2_std_id norm)
 647 {
 648         if (norm & V4L2_STD_PAL_M)
 649                 return 28604892;      // 3.575611 MHz
 650
 651         if (norm & (V4L2_STD_PAL_Nc))
 652                 return 28656448;      // 3.582056 MHz
 653
 654         if (norm & V4L2_STD_NTSC) // All NTSC/M and variants
 655                 return 28636360;      // 3.57954545 MHz +/- 10 Hz
 656
 657         /* SECAM have also different sub carrier for chroma,
 658            but step_db and step_dr, at cx88_set_tvnorm already handles that.
 659
 660            The same FSC applies to PAL/BGDKIH, PAL/60, NTSC/4.43 and PAL/N
 661          */
 662
 663         return 35468950;      // 4.43361875 MHz +/- 5 Hz
 664 }
 665
 666 static unsigned int inline norm_htotal(v4l2_std_id norm)
 667 {
 668
 669         unsigned int fsc4=norm_fsc8(norm)/2;
 670
 671         /* returns 4*FSC / vtotal / frames per seconds */
 672         return (norm & V4L2_STD_625_50) ?
 673                                 ((fsc4+312)/625+12)/25 :
 674                                 ((fsc4+262)/525*1001+15000)/30000;
 675 }
 676
 677 static unsigned int inline norm_vbipack(v4l2_std_id norm)
 678 {
 679         return (norm & V4L2_STD_625_50) ? 511 : 400;
 680 }
 681
 682 int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int height,
 683                    enum v4l2_field field)
 684 {
 685         unsigned int swidth  = norm_swidth(core->tvnorm);
 686         unsigned int sheight = norm_maxh(core->tvnorm);
 687         u32 value;
 688
 689         dprintk(1,"set_scale: %dx%d [%s%s,%s]\n", width, height,
 690                 V4L2_FIELD_HAS_TOP(field)    ? "T" : "",
 691                 V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
 692                 v4l2_norm_to_name(core->tvnorm));
 693         if (!V4L2_FIELD_HAS_BOTH(field))
 694                 height *= 2;
 695
 696         // recalc H delay and scale registers
 697         value = (width * norm_hdelay(core->tvnorm)) / swidth;
 698         value &= 0x3fe;
 699         cx_write(MO_HDELAY_EVEN,  value);
 700         cx_write(MO_HDELAY_ODD,   value);
 701         dprintk(1,"set_scale: hdelay  0x%04x (width %d)\n", value,swidth);
 702
 703         value = (swidth * 4096 / width) - 4096;
 704         cx_write(MO_HSCALE_EVEN,  value);
 705         cx_write(MO_HSCALE_ODD,   value);
 706         dprintk(1,"set_scale: hscale  0x%04x\n", value);
 707
 708         cx_write(MO_HACTIVE_EVEN, width);
 709         cx_write(MO_HACTIVE_ODD,  width);
 710         dprintk(1,"set_scale: hactive 0x%04x\n", width);
 711
 712         // recalc V scale Register (delay is constant)
 713         cx_write(MO_VDELAY_EVEN, norm_vdelay(core->tvnorm));
 714         cx_write(MO_VDELAY_ODD,  norm_vdelay(core->tvnorm));
 715         dprintk(1,"set_scale: vdelay  0x%04x\n", norm_vdelay(core->tvnorm));
 716
 717         value = (0x10000 - (sheight * 512 / height - 512)) & 0x1fff;
 718         cx_write(MO_VSCALE_EVEN,  value);
 719         cx_write(MO_VSCALE_ODD,   value);
 720         dprintk(1,"set_scale: vscale  0x%04x\n", value);
 721
 722         cx_write(MO_VACTIVE_EVEN, sheight);
 723         cx_write(MO_VACTIVE_ODD,  sheight);
 724         dprintk(1,"set_scale: vactive 0x%04x\n", sheight);
 725
 726         // setup filters
 727         value = 0;
 728         value |= (1 << 19);        // CFILT (default)
 729         if (core->tvnorm & V4L2_STD_SECAM) {
 730                 value |= (1 << 15);
 731                 value |= (1 << 16);
 732         }
 733         if (INPUT(core->input).type == CX88_VMUX_SVIDEO)
 734                 value |= (1 << 13) | (1 << 5);
 735         if (V4L2_FIELD_INTERLACED == field)
 736                 value |= (1 << 3); // VINT (interlaced vertical scaling)
 737         if (width < 385)
 738                 value |= (1 << 0); // 3-tap interpolation
 739         if (width < 193)
 740                 value |= (1 << 1); // 5-tap interpolation
 741         if (nocomb)
 742                 value |= (3 << 5); // disable comb filter
 743
 744         cx_write(MO_FILTER_EVEN,  value);
 745         cx_write(MO_FILTER_ODD,   value);
 746         dprintk(1,"set_scale: filter  0x%04x\n", value);
 747
 748         return 0;
 749 }
 750
 751 static const u32 xtal = 28636363;
 752
 753 static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
 754 {
 755         static u32 pre[] = { 0, 0, 0, 3, 2, 1 };
 756         u64 pll;
 757         u32 reg;
 758         int i;
 759
 760         if (prescale < 2)
 761                 prescale = 2;
 762         if (prescale > 5)
 763                 prescale = 5;
 764
 765         pll = ofreq * 8 * prescale * (u64)(1 << 20);
 766         do_div(pll,xtal);
 767         reg = (pll & 0x3ffffff) | (pre[prescale] << 26);
 768         if (((reg >> 20) & 0x3f) < 14) {
 769                 printk("%s/0: pll out of range\n",core->name);
 770                 return -1;
 771         }
 772
 773         dprintk(1,"set_pll:    MO_PLL_REG       0x%08x [old=0x%08x,freq=%d]\n",
 774                 reg, cx_read(MO_PLL_REG), ofreq);
 775         cx_write(MO_PLL_REG, reg);
 776         for (i = 0; i < 100; i++) {
 777                 reg = cx_read(MO_DEVICE_STATUS);
 778                 if (reg & (1<<2)) {
 779                         dprintk(1,"pll locked [pre=%d,ofreq=%d]\n",
 780                                 prescale,ofreq);
 781                         return 0;
 782                 }
 783                 dprintk(1,"pll not locked yet, waiting ...\n");
 784                 msleep(10);
 785         }
 786         dprintk(1,"pll NOT locked [pre=%d,ofreq=%d]\n",prescale,ofreq);
 787         return -1;
 788 }
 789
 790 int cx88_start_audio_dma(struct cx88_core *core)
 791 {
 792         /* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
 793         int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
 794
 795         /* If downstream RISC is enabled, bail out; ALSA is managing DMA */
 796         if (cx_read(MO_AUD_DMACNTRL) & 0x10)
 797                 return 0;
 798
 799         /* setup fifo + format */
 800         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
 801         cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
 802
 803         cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
 804         cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
 805
 806         /* start dma */
 807         cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
 808
 809         return 0;
 810 }
 811
 812 int cx88_stop_audio_dma(struct cx88_core *core)
 813 {
 814         /* If downstream RISC is enabled, bail out; ALSA is managing DMA */
 815         if (cx_read(MO_AUD_DMACNTRL) & 0x10)
 816                 return 0;
 817
 818         /* stop dma */
 819         cx_write(MO_AUD_DMACNTRL, 0x0000);
 820
 821         return 0;
 822 }
 823
 824 static int set_tvaudio(struct cx88_core *core)
 825 {
 826         v4l2_std_id norm = core->tvnorm;
 827
 828         if (CX88_VMUX_TELEVISION != INPUT(core->input).type)
 829                 return 0;
 830
 831         if (V4L2_STD_PAL_BG & norm) {
 832                 core->tvaudio = WW_BG;
 833
 834         } else if (V4L2_STD_PAL_DK & norm) {
 835                 core->tvaudio = WW_DK;
 836
 837         } else if (V4L2_STD_PAL_I & norm) {
 838                 core->tvaudio = WW_I;
 839
 840         } else if (V4L2_STD_SECAM_L & norm) {
 841                 core->tvaudio = WW_L;
 842
 843         } else if (V4L2_STD_SECAM_DK & norm) {
 844                 core->tvaudio = WW_DK;
 845
 846         } else if ((V4L2_STD_NTSC_M & norm) ||
 847                    (V4L2_STD_PAL_M  & norm)) {
 848                 core->tvaudio = WW_BTSC;
 849
 850         } else if (V4L2_STD_NTSC_M_JP & norm) {
 851                 core->tvaudio = WW_EIAJ;
 852
 853         } else {
 854                 printk("%s/0: tvaudio support needs work for this tv norm [%s], sorry\n",
 855                        core->name, v4l2_norm_to_name(core->tvnorm));
 856                 core->tvaudio = 0;
 857                 return 0;
 858         }
 859
 860         cx_andor(MO_AFECFG_IO, 0x1f, 0x0);
 861         cx88_set_tvaudio(core);
 862         /* cx88_set_stereo(dev,V4L2_TUNER_MODE_STEREO); */
 863
 864 /*
 865    This should be needed only on cx88-alsa. It seems that some cx88 chips have
 866    bugs and does require DMA enabled for it to work.
 867  */
 868         cx88_start_audio_dma(core);
 869         return 0;
 870 }
 871
 872
 873
 874 int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
 875 {
 876         u32 fsc8;
 877         u32 adc_clock;
 878         u32 vdec_clock;
 879         u32 step_db,step_dr;
 880         u64 tmp64;
 881         u32 bdelay,agcdelay,htotal;
 882         u32 cxiformat, cxoformat;
 883
 884         core->tvnorm = norm;
 885         fsc8       = norm_fsc8(norm);
 886         adc_clock  = xtal;
 887         vdec_clock = fsc8;
 888         step_db    = fsc8;
 889         step_dr    = fsc8;
 890
 891         if (norm & V4L2_STD_NTSC_M_JP) {
 892                 cxiformat = VideoFormatNTSCJapan;
 893                 cxoformat = 0x181f0008;
 894         } else if (norm & V4L2_STD_NTSC_443) {
 895                 cxiformat = VideoFormatNTSC443;
 896                 cxoformat = 0x181f0008;
 897         } else if (norm & V4L2_STD_PAL_M) {
 898                 cxiformat = VideoFormatPALM;
 899                 cxoformat = 0x1c1f0008;
 900         } else if (norm & V4L2_STD_PAL_N) {
 901                 cxiformat = VideoFormatPALN;
 902                 cxoformat = 0x1c1f0008;
 903         } else if (norm & V4L2_STD_PAL_Nc) {
 904                 cxiformat = VideoFormatPALNC;
 905                 cxoformat = 0x1c1f0008;
 906         } else if (norm & V4L2_STD_PAL_60) {
 907                 cxiformat = VideoFormatPAL60;
 908                 cxoformat = 0x181f0008;
 909         } else if (norm & V4L2_STD_NTSC) {
 910                 cxiformat = VideoFormatNTSC;
 911                 cxoformat = 0x181f0008;
 912         } else if (norm & V4L2_STD_SECAM) {
 913                 step_db = 4250000 * 8;
 914                 step_dr = 4406250 * 8;
 915
 916                 cxiformat = VideoFormatSECAM;
 917                 cxoformat = 0x181f0008;
 918         } else { /* PAL */
 919                 cxiformat = VideoFormatPAL;
 920                 cxoformat = 0x181f0008;
 921         }
 922
 923         dprintk(1,"set_tvnorm: \"%s\" fsc8=%d adc=%d vdec=%d db/dr=%d/%d\n",
 924                 v4l2_norm_to_name(core->tvnorm), fsc8, adc_clock, vdec_clock,
 925                 step_db, step_dr);
 926         set_pll(core,2,vdec_clock);
 927
 928         dprintk(1,"set_tvnorm: MO_INPUT_FORMAT  0x%08x [old=0x%08x]\n",
 929                 cxiformat, cx_read(MO_INPUT_FORMAT) & 0x0f);
 930         cx_andor(MO_INPUT_FORMAT, 0xf, cxiformat);
 931
 932         // FIXME: as-is from DScaler
 933         dprintk(1,"set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n",
 934                 cxoformat, cx_read(MO_OUTPUT_FORMAT));
 935         cx_write(MO_OUTPUT_FORMAT, cxoformat);
 936
 937         // MO_SCONV_REG = adc clock / video dec clock * 2^17
 938         tmp64  = adc_clock * (u64)(1 << 17);
 939         do_div(tmp64, vdec_clock);
 940         dprintk(1,"set_tvnorm: MO_SCONV_REG     0x%08x [old=0x%08x]\n",
 941                 (u32)tmp64, cx_read(MO_SCONV_REG));
 942         cx_write(MO_SCONV_REG, (u32)tmp64);
 943
 944         // MO_SUB_STEP = 8 * fsc / video dec clock * 2^22
 945         tmp64  = step_db * (u64)(1 << 22);
 946         do_div(tmp64, vdec_clock);
 947         dprintk(1,"set_tvnorm: MO_SUB_STEP      0x%08x [old=0x%08x]\n",
 948                 (u32)tmp64, cx_read(MO_SUB_STEP));
 949         cx_write(MO_SUB_STEP, (u32)tmp64);
 950
 951         // MO_SUB_STEP_DR = 8 * 4406250 / video dec clock * 2^22
 952         tmp64  = step_dr * (u64)(1 << 22);
 953         do_div(tmp64, vdec_clock);
 954         dprintk(1,"set_tvnorm: MO_SUB_STEP_DR   0x%08x [old=0x%08x]\n",
 955                 (u32)tmp64, cx_read(MO_SUB_STEP_DR));
 956         cx_write(MO_SUB_STEP_DR, (u32)tmp64);
 957
 958         // bdelay + agcdelay
 959         bdelay   = vdec_clock * 65 / 20000000 + 21;
 960         agcdelay = vdec_clock * 68 / 20000000 + 15;
 961         dprintk(1,"set_tvnorm: MO_AGC_BURST     0x%08x [old=0x%08x,bdelay=%d,agcdelay=%d]\n",
 962                 (bdelay << 8) | agcdelay, cx_read(MO_AGC_BURST), bdelay, agcdelay);
 963         cx_write(MO_AGC_BURST, (bdelay << 8) | agcdelay);
 964
 965         // htotal
 966         tmp64 = norm_htotal(norm) * (u64)vdec_clock;
 967         do_div(tmp64, fsc8);
 968         htotal = (u32)tmp64 | (HLNotchFilter4xFsc << 11);
 969         dprintk(1,"set_tvnorm: MO_HTOTAL        0x%08x [old=0x%08x,htotal=%d]\n",
 970                 htotal, cx_read(MO_HTOTAL), (u32)tmp64);
 971         cx_write(MO_HTOTAL, htotal);
 972
 973         // vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes
 974         // the effective vbi offset ~244 samples, the same as the Bt8x8
 975         cx_write(MO_VBI_PACKET, (10<<11) | norm_vbipack(norm));
 976
 977         // this is needed as well to set all tvnorm parameter
 978         cx88_set_scale(core, 320, 240, V4L2_FIELD_INTERLACED);
 979
 980         // audio
 981         set_tvaudio(core);
 982
 983         // tell i2c chips
 984         cx88_call_i2c_clients(core,VIDIOC_S_STD,&norm);
 985
 986         // done
 987         return 0;
 988 }
 989
 990 /* ------------------------------------------------------------------ */
 991
 992 struct video_device *cx88_vdev_init(struct cx88_core *core,
 993                                     struct pci_dev *pci,
 994                                     struct video_device *template,
 995                                     char *type)
 996 {
 997         struct video_device *vfd;
 998
 999         vfd = video_device_alloc();
1000         if (NULL == vfd)
1001                 return NULL;
1002         *vfd = *template;
1003         vfd->minor   = -1;
1004         vfd->dev     = &pci->dev;
1005         vfd->release = video_device_release;
1006         snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
1007                  core->name, type, core->board.name);
1008         return vfd;
1009 }
1010
1011 struct cx88_core* cx88_core_get(struct pci_dev *pci)
1012 {
1013         struct cx88_core *core;
1014         struct list_head *item;
1015
1016         mutex_lock(&devlist);
1017         list_for_each(item,&cx88_devlist) {
1018                 core = list_entry(item, struct cx88_core, devlist);
1019                 if (pci->bus->number != core->pci_bus)
1020                         continue;
1021                 if (PCI_SLOT(pci->devfn) != core->pci_slot)
1022                         continue;
1023
1024                 if (0 != cx88_get_resources(core, pci)) {
1025                         mutex_unlock(&devlist);
1026                         return NULL;
1027                 }
1028                 atomic_inc(&core->refcount);
1029                 mutex_unlock(&devlist);
1030                 return core;
1031         }
1032
1033         core = cx88_core_create(pci, cx88_devcount);
1034         if (NULL != core) {
1035                 cx88_devcount++;
1036                 list_add_tail(&core->devlist, &cx88_devlist);
1037         }
1038
1039         mutex_unlock(&devlist);
1040         return core;
1041 }
1042
1043 void cx88_core_put(struct cx88_core *core, struct pci_dev *pci)
1044 {
1045         release_mem_region(pci_resource_start(pci,0),
1046                            pci_resource_len(pci,0));
1047
1048         if (!atomic_dec_and_test(&core->refcount))
1049                 return;
1050
1051         mutex_lock(&devlist);
1052         cx88_ir_fini(core);
1053         if (0 == core->i2c_rc)
1054                 i2c_del_adapter(&core->i2c_adap);
1055         list_del(&core->devlist);
1056         iounmap(core->lmmio);
1057         cx88_devcount--;
1058         mutex_unlock(&devlist);
1059         kfree(core);
1060 }
1061
1062 /* ------------------------------------------------------------------ */
1063
1064 EXPORT_SYMBOL(cx88_print_irqbits);
1065
1066 EXPORT_SYMBOL(cx88_core_irq);
1067 EXPORT_SYMBOL(cx88_wakeup);
1068 EXPORT_SYMBOL(cx88_reset);
1069 EXPORT_SYMBOL(cx88_shutdown);
1070
1071 EXPORT_SYMBOL(cx88_risc_buffer);
1072 EXPORT_SYMBOL(cx88_risc_databuffer);
1073 EXPORT_SYMBOL(cx88_risc_stopper);
1074 EXPORT_SYMBOL(cx88_free_buffer);
1075
1076 EXPORT_SYMBOL(cx88_sram_channels);
1077 EXPORT_SYMBOL(cx88_sram_channel_setup);
1078 EXPORT_SYMBOL(cx88_sram_channel_dump);
1079
1080 EXPORT_SYMBOL(cx88_set_tvnorm);
1081 EXPORT_SYMBOL(cx88_set_scale);
1082
1083 EXPORT_SYMBOL(cx88_vdev_init);
1084 EXPORT_SYMBOL(cx88_core_get);
1085 EXPORT_SYMBOL(cx88_core_put);
1086
1087 EXPORT_SYMBOL(cx88_ir_start);
1088 EXPORT_SYMBOL(cx88_ir_stop);
1089
1090 /*
1091  * Local variables:
1092  * c-basic-offset: 8
1093  * End:
1094  * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
1095  */