2 # Multimedia Video device configuration
5 menu "Video Capture Adapters"
8 comment "Video Capture Adapters"
10 config VIDEO_ADV_DEBUG
11 bool "Enable advanced debug functionality"
15 Say Y here to enable advanced debugging functionality on some
20 tristate "Virtual Video Driver"
21 depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
25 Enables a virtual video driver. This device shows a color bar
26 and a timestamp, as a real device would generate by using V4L2
28 Say Y here if you want to test video apps or debug V4L devices.
31 source "drivers/media/video/bt8xx/Kconfig"
34 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
35 depends on I2C && VIDEO_BT848
38 Support for Radio Data System (RDS) decoder. This allows seeing
39 radio station identification transmitted using this standard.
40 Currentlly, it works only with bt8x8 chips.
42 To compile this driver as a module, choose M here: the
43 module will be called saa6588.
46 tristate "Mediavision Pro Movie Studio Video For Linux"
47 depends on ISA && VIDEO_V4L1
49 Say Y if you have such a thing.
51 To compile this driver as a module, choose M here: the
52 module will be called pms.
55 tristate "PlanB Video-In on PowerMac"
56 depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
58 PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
59 input hardware. If you want to experiment with this, say Y.
60 Otherwise, or if you don't understand a word, say N. See
61 <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
63 Saying M will compile this driver as a module (planb).
66 tristate "Quickcam BW Video For Linux"
67 depends on PARPORT && VIDEO_V4L1
69 Say Y have if you the black and white version of the QuickCam
70 camera. See the next option for the color version.
72 To compile this driver as a module, choose M here: the
73 module will be called bw-qcam.
76 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
77 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
79 This is the video4linux driver for the colour version of the
80 Connectix QuickCam. If you have one of these cameras, say Y here,
81 otherwise say N. This driver does not work with the original
82 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
84 Read <file:Documentation/video4linux/CQcam.txt> for more information.
87 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
88 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
90 Video4linux driver for Winbond's w9966 based Webcams.
91 Currently tested with the LifeView FlyCam Supra.
92 If you have one of these cameras, say Y here
94 This driver is also available as a module (w9966).
96 Check out <file:Documentation/video4linux/w9966.txt> for more
100 tristate "CPiA Video For Linux"
101 depends on VIDEO_V4L1
103 This is the video4linux driver for cameras based on Vision's CPiA
104 (Colour Processor Interface ASIC), such as the Creative Labs Video
105 Blaster Webcam II. If you have one of these cameras, say Y here
106 and select parallel port and/or USB lowlevel support below,
107 otherwise say N. This will not work with the Creative Webcam III.
109 Please read <file:Documentation/video4linux/README.cpia> for more
112 This driver is also available as a module (cpia).
115 tristate "CPiA Parallel Port Lowlevel Support"
116 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
118 This is the lowlevel parallel port support for cameras based on
119 Vision's CPiA (Colour Processor Interface ASIC), such as the
120 Creative Webcam II. If you have the parallel port version of one
121 of these cameras, say Y here, otherwise say N. It is also available
122 as a module (cpia_pp).
124 config VIDEO_CPIA_USB
125 tristate "CPiA USB Lowlevel Support"
126 depends on VIDEO_CPIA && USB
128 This is the lowlevel USB support for cameras based on Vision's CPiA
129 (Colour Processor Interface ASIC), such as the Creative Webcam II.
130 If you have the USB version of one of these cameras, say Y here,
131 otherwise say N. This will not work with the Creative Webcam III.
132 It is also available as a module (cpia_usb).
134 source "drivers/media/video/cpia2/Kconfig"
136 config VIDEO_SAA5246A
137 tristate "SAA5246A, SAA5281 Teletext processor"
138 depends on I2C && VIDEO_V4L1
140 Support for I2C bus based teletext using the SAA5246A or SAA5281
141 chip. Useful only if you live in Europe.
143 To compile this driver as a module, choose M here: the
144 module will be called saa5246a.
147 tristate "SAA5249 Teletext processor"
148 depends on VIDEO_DEV && I2C && VIDEO_V4L1
150 Support for I2C bus based teletext using the SAA5249 chip. At the
151 moment this is only useful on some European WinTV cards.
153 To compile this driver as a module, choose M here: the
154 module will be called saa5249.
157 tristate "SAB3036 tuner"
158 depends on VIDEO_DEV && I2C && VIDEO_V4L1
160 Say Y here to include support for Philips SAB3036 compatible tuners.
164 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
165 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
168 Say Y here to build in support for the Vino video input system found
169 on SGI Indy machines.
172 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
173 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
175 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
176 driver for PCI. There is a product page at
177 <http://www.stradis.com/>.
180 tristate "Zoran ZR36057/36067 Video For Linux"
181 depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
183 Say Y for support for MJPEG capture cards based on the Zoran
184 36057/36067 PCI controller chipset. This includes the Iomega
185 Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
186 a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
187 more information, check <file:Documentation/video4linux/Zoran>.
189 To compile this driver as a module, choose M here: the
190 module will be called zr36067.
192 config VIDEO_ZORAN_BUZ
193 tristate "Iomega Buz support"
194 depends on VIDEO_ZORAN
196 Support for the Iomega Buz MJPEG capture/playback card.
198 config VIDEO_ZORAN_DC10
199 tristate "Pinnacle/Miro DC10(+) support"
200 depends on VIDEO_ZORAN
202 Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
205 config VIDEO_ZORAN_DC30
206 tristate "Pinnacle/Miro DC30(+) support"
207 depends on VIDEO_ZORAN
209 Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
210 card. This also supports really old DC10 cards based on the
211 zr36050 MJPEG codec and zr36016 VFE.
213 config VIDEO_ZORAN_LML33
214 tristate "Linux Media Labs LML33 support"
215 depends on VIDEO_ZORAN
217 Support for the Linux Media Labs LML33 MJPEG capture/playback
220 config VIDEO_ZORAN_LML33R10
221 tristate "Linux Media Labs LML33R10 support"
222 depends on VIDEO_ZORAN
224 support for the Linux Media Labs LML33R10 MJPEG capture/playback
227 config VIDEO_ZORAN_AVS6EYES
228 tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
229 depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
231 Support for the AverMedia 6 Eyes video surveillance card.
234 tristate "Zoran ZR36120/36125 Video For Linux"
235 depends on PCI && I2C && VIDEO_V4L1 && BROKEN
237 Support for ZR36120/ZR36125 based frame grabber/overlay boards.
238 This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
239 and Buster boards. Please read the material in
240 <file:Documentation/video4linux/zr36120.txt> for more information.
242 To compile this driver as a module, choose M here: the
243 module will be called zr36120.
246 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
247 depends on PCI && SONYPI && VIDEO_V4L1
249 This is the video4linux driver for the Motion Eye camera found
250 in the Vaio Picturebook laptops. Please read the material in
251 <file:Documentation/video4linux/meye.txt> for more information.
253 If you say Y or M here, you need to say Y or M to "Sony Programmable
254 I/O Control Device" in the character device section.
256 To compile this driver as a module, choose M here: the
257 module will be called meye.
259 source "drivers/media/video/saa7134/Kconfig"
262 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
263 depends on PCI && VIDEO_V4L1 && I2C
264 select VIDEO_SAA7146_VV
267 This is a video4linux driver for the 'Multimedia eXtension Board'
268 TV card by Siemens-Nixdorf.
270 To compile this driver as a module, choose M here: the
271 module will be called mxb.
274 tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
275 depends on PCI && VIDEO_V4L1 && I2C
276 select VIDEO_SAA7146_VV
279 This is a video4linux driver for the 'dpc7146 demonstration
280 board' by Philips-Semiconductors. It's the reference design
281 for SAA7146 bases boards, so if you have some unsupported
282 saa7146 based, analog video card, chances are good that it
283 will work with this skeleton driver.
285 To compile this driver as a module, choose M here: the
286 module will be called dpc7146.
288 config VIDEO_HEXIUM_ORION
289 tristate "Hexium HV-PCI6 and Orion frame grabber"
290 depends on PCI && VIDEO_V4L1 && I2C
291 select VIDEO_SAA7146_VV
294 This is a video4linux driver for the Hexium HV-PCI6 and
295 Orion frame grabber cards by Hexium.
297 To compile this driver as a module, choose M here: the
298 module will be called hexium_orion.
300 config VIDEO_HEXIUM_GEMINI
301 tristate "Hexium Gemini frame grabber"
302 depends on PCI && VIDEO_V4L1 && I2C
303 select VIDEO_SAA7146_VV
306 This is a video4linux driver for the Hexium Gemini frame
307 grabber card by Hexium. Please note that the Gemini Dual
308 card is *not* fully supported.
310 To compile this driver as a module, choose M here: the
311 module will be called hexium_gemini.
313 source "drivers/media/video/cx88/Kconfig"
316 tristate "AR devices"
317 depends on M32R && VIDEO_V4L1
319 This is a video4linux driver for the Renesas AR (Artificial Retina)
322 config VIDEO_M32R_AR_M64278
323 tristate "AR device with color module M64278(VGA)"
324 depends on PLAT_M32700UT
327 This is a video4linux driver for the Renesas AR (Artificial
328 Retina) with M64278E-800 camera module.
329 This module supports VGA(640x480 pixels) resolutions.
331 To compile this driver as a module, choose M here: the
332 module will be called arv.
335 # Encoder / Decoder module configuration
338 menu "Encoders and Decoders"
342 tristate "Micronas MSP34xx audio decoders"
343 depends on VIDEO_DEV && I2C
345 Support for the Micronas MSP34xx series of audio decoders.
347 To compile this driver as a module, choose M here: the
348 module will be called msp3400.
350 config VIDEO_CS53L32A
351 tristate "Cirrus Logic CS53L32A audio ADC"
352 depends on VIDEO_DEV && I2C && EXPERIMENTAL
354 Support for the Cirrus Logic CS53L32A low voltage
355 stereo A/D converter.
357 To compile this driver as a module, choose M here: the
358 module will be called cs53l32a.
360 config VIDEO_TLV320AIC23B
361 tristate "Texas Instruments TLV320AIC23B audio codec"
362 depends on VIDEO_DEV && I2C && EXPERIMENTAL
364 Support for the Texas Instruments TLV320AIC23B audio codec.
366 To compile this driver as a module, choose M here: the
367 module will be called tlv320aic23b.
370 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
371 depends on VIDEO_DEV && I2C && EXPERIMENTAL
373 Support for the Wolfson Microelectronics WM8775 high
374 performance stereo A/D Converter with a 4 channel input mixer.
376 To compile this driver as a module, choose M here: the
377 module will be called wm8775.
380 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
381 depends on VIDEO_DEV && I2C && EXPERIMENTAL
383 Support for the Wolfson Microelectronics WM8739
384 stereo A/D Converter.
386 To compile this driver as a module, choose M here: the
387 module will be called wm8739.
390 tristate "Conexant CX2341x MPEG encoders"
391 depends on VIDEO_V4L2 && EXPERIMENTAL
393 Support for the Conexant CX23416 MPEG encoders
394 and CX23415 MPEG encoder/decoders.
396 This module currently supports the encoding functions only.
398 To compile this driver as a module, choose M here: the
399 module will be called cx2341x.
401 source "drivers/media/video/cx25840/Kconfig"
404 tristate "Philips SAA7113/4/5 video decoders"
405 depends on VIDEO_DEV && I2C && EXPERIMENTAL
407 Support for the Philips SAA7113/4/5 video decoders.
409 To compile this driver as a module, choose M here: the
410 module will be called saa7115.
413 tristate "Texas Instruments TVP5150 video decoder"
414 depends on VIDEO_DEV && I2C
416 Support for the Texas Instruments TVP5150 video decoder.
418 To compile this driver as a module, choose M here: the
419 module will be called tvp5150.
422 tristate "Philips SAA7127/9 digital video encoders"
423 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
425 Support for the Philips SAA7127/9 digital video encoders.
427 To compile this driver as a module, choose M here: the
428 module will be called saa7127.
430 config VIDEO_UPD64031A
431 tristate "NEC Electronics uPD64031A Ghost Reduction"
432 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
434 Support for the NEC Electronics uPD64031A Ghost Reduction
435 video chip. It is most often found in NTSC TV cards made for
436 Japan and is used to reduce the 'ghosting' effect that can
437 be present in analog TV broadcasts.
439 To compile this driver as a module, choose M here: the
440 module will be called upd64031a.
442 config VIDEO_UPD64083
443 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
444 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
446 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
447 separation video chip. It is used to improve the quality of
448 the colors of a composite signal.
450 To compile this driver as a module, choose M here: the
451 module will be called upd64083.
453 endmenu # encoder / decoder chips
456 # USB Multimedia device configuration
459 menu "V4L USB devices"
460 depends on USB && VIDEO_DEV
462 source "drivers/media/video/pvrusb2/Kconfig"
464 source "drivers/media/video/em28xx/Kconfig"
466 source "drivers/media/video/usbvideo/Kconfig"
468 source "drivers/media/video/et61x251/Kconfig"
470 config VIDEO_OVCAMCHIP
471 tristate "OmniVision Camera Chip support"
472 depends on I2C && VIDEO_V4L1
474 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
475 This driver is intended to be used with the ov511 and w9968cf USB
478 To compile this driver as a module, choose M here: the
479 module will be called ovcamchip.
482 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
483 depends on USB && VIDEO_V4L1 && I2C
484 select VIDEO_OVCAMCHIP
486 Say Y here if you want support for cameras based on OV681 or
487 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
489 This driver has an optional plugin, which is distributed as a
490 separate module only (released under GPL). It allows to use higher
491 resolutions and framerates, but cannot be included in the official
492 Linux kernel for performance purposes.
494 See <file:Documentation/video4linux/w9968cf.txt> for more info.
496 To compile this driver as a module, choose M here: the
497 module will be called w9968cf.
500 tristate "USB OV511 Camera support"
501 depends on USB && VIDEO_V4L1
503 Say Y here if you want to connect this type of camera to your
504 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
505 for more information and for a list of supported cameras.
507 To compile this driver as a module, choose M here: the
508 module will be called ov511.
511 tristate "USB SE401 Camera support"
512 depends on USB && VIDEO_V4L1
514 Say Y here if you want to connect this type of camera to your
515 computer's USB port. See <file:Documentation/video4linux/se401.txt>
516 for more information and for a list of supported cameras.
518 To compile this driver as a module, choose M here: the
519 module will be called se401.
521 source "drivers/media/video/sn9c102/Kconfig"
524 tristate "USB STV680 (Pencam) Camera support"
525 depends on USB && VIDEO_V4L1
527 Say Y here if you want to connect this type of camera to your
528 computer's USB port. This includes the Pencam line of cameras.
529 See <file:Documentation/video4linux/stv680.txt> for more information
530 and for a list of supported cameras.
532 To compile this driver as a module, choose M here: the
533 module will be called stv680.
535 source "drivers/media/video/zc0301/Kconfig"
537 source "drivers/media/video/pwc/Kconfig"
539 endmenu # V4L USB devices