2 menu "Macintosh device drivers"
6 bool "Apple Desktop Bus (ADB) support"
7 depends on MAC || (PPC_PMAC && PPC32)
9 Apple Desktop Bus (ADB) support is for support of devices which
10 are connected to an ADB port. ADB devices tend to have 4 pins.
11 If you have an Apple Macintosh prior to the iMac, an iBook or
12 PowerBook, or a "Blue and White G3", you probably want to say Y
13 here. Otherwise say N.
16 bool "Include Mac II ADB driver"
19 Say Y here if want your kernel to support Macintosh systems that use
20 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
21 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
25 bool "Include Mac IIsi ADB driver"
28 Say Y here if want your kernel to support Macintosh systems that use
29 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
30 II, LC, LC II, LC III, Performa 460, and the Performa 600.
33 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
36 The I/O Processor (IOP) is an Apple custom IC designed to provide
37 intelligent support for I/O controllers. It is described at
38 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
39 support for it, say 'Y' here.
42 bool "Include PMU (Powerbook) ADB driver"
45 Say Y here if want your kernel to support the m68k based Powerbooks.
46 This includes the PowerBook 140, PowerBook 145, PowerBook 150,
47 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
48 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
49 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
50 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
54 bool "Support for CUDA based Macs and PowerMacs"
55 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
57 This provides support for CUDA based Macintosh and Power Macintosh
58 systems. This includes many m68k based Macs (Color Classic, Mac TV,
59 Performa 475, Performa 520, Performa 550, Performa 575,
60 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
61 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
62 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
63 models should use CONFIG_ADB_PMU instead. It is safe to say Y here
64 even if your machine doesn't have a CUDA.
69 bool "Support for PMU based PowerMacs"
72 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
73 PMU is an embedded microprocessor whose primary function is to
74 control system power, and battery charging on the portable models.
75 The PMU also controls the ADB (Apple Desktop Bus) which connects to
76 the keyboard and mouse on some machines, as well as the non-volatile
77 RAM and the RTC (real time clock) chip. Say Y to enable support for
78 this device; you should do so if your machine is one of those
82 bool "Support for SMU based PowerMacs"
85 This option adds support for the newer G5 iMacs and PowerMacs based
86 on the "SMU" system control chip which replaces the old PMU.
87 If you don't know, say Y.
90 tristate "APM emulation"
91 depends on PPC_PMAC && PPC32 && PM
94 bool "Support PowerBook hotswap media bay"
95 depends on PPC_PMAC && PPC32
97 This option adds support for older PowerBook's hotswap media bay
98 that can contains batteries, floppy drives, or IDE devices. PCI
99 devices are not fully supported in the bay as I never had one to
102 config PMAC_BACKLIGHT
103 bool "Backlight control for LCD screens"
104 depends on ADB_PMU && (BROKEN || !PPC64)
106 Say Y here to enable Macintosh specific extensions of the generic
107 backlight code. With this enabled, the brightness keys on older
108 PowerBooks will be enabled so you can change the screen brightness.
109 Newer models should use an userspace daemon like pbbuttonsd.
111 config PMAC_BACKLIGHT_LEGACY
112 bool "Provide legacy ioctl's on /dev/pmu for the backlight"
113 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
115 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
116 programs which use this old interface. New and updated programs
117 should use the backlight classes in sysfs.
120 bool "Include MacIO (CHRP) ADB driver"
121 depends on ADB && PPC_CHRP && !PPC_PMAC64
123 Say Y here to include direct support for the ADB controller in the
124 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
125 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
126 OpenPIC controller and two RS422/Geoports.)
129 bool "Support for ADB input devices (keyboard, mice, ...)"
130 depends on ADB && INPUT=y
132 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
133 such as keyboards, mice, joysticks, trackpads or graphic tablets
134 handled by the input layer. If you say Y here, make sure to say Y to
135 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
136 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
137 support" (CONFIG_INPUT_EVDEV) as well.
141 config MAC_EMUMOUSEBTN
142 bool "Support for mouse button 2+3 emulation"
143 depends on INPUT_ADBHID
145 This provides generic support for emulating the 2nd and 3rd mouse
146 button with keypresses. If you say Y here, the emulation is still
147 disabled by default. The emulation is controlled by these sysctl
149 /proc/sys/dev/mac_hid/mouse_button_emulation
150 /proc/sys/dev/mac_hid/mouse_button2_keycode
151 /proc/sys/dev/mac_hid/mouse_button3_keycode
153 If you have an Apple machine with a 1-button mouse, say Y here.
155 config THERM_WINDTUNNEL
156 tristate "Support for thermal management on Windtunnel G4s"
157 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
159 This driver provides some thermostat and fan control for the desktop
163 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
164 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
166 This driver provides some thermostat and fan control for the
167 iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
168 better fan behaviour by default, and some manual control.
171 tristate "Support for thermal management on PowerMac G5"
172 depends on I2C && I2C_POWERMAC && PPC_PMAC64
174 This driver provides thermostat and fan control for the desktop
178 tristate "New PowerMac thermal control infrastructure"
182 tristate "Support for thermal management on iMac G5"
183 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
186 This driver provides thermal control for the iMacG5
189 tristate "Support for thermal management on PowerMac9,1"
190 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
193 This driver provides thermal control for the PowerMac9,1
194 which is the recent (SMU based) single CPU desktop G5
196 config WINDFARM_PM112
197 tristate "Support for thermal management on PowerMac11,2"
198 depends on WINDFARM && I2C && PMAC_SMU
201 This driver provides thermal control for the PowerMac11,2
202 which are the recent dual and quad G5 machines using the
203 970MP dual-core processor.
206 tristate "Support for ANS LCD display"
207 depends on ADB_CUDA && PPC_PMAC