err.no Git - linux-2.6/blob - drivers/isdn/hysdn/hysdn_procconf.c

   1 /* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
   2  *
   3  * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
   4  *
   5  * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
   6  *
   7  * Copyright 1999  by Werner Cornelius (werner@titro.de)
   8  *
   9  * This software may be used and distributed according to the terms
  10  * of the GNU General Public License, incorporated herein by reference.
  11  *
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/poll.h>
  16 #include <linux/proc_fs.h>
  17 #include <linux/pci.h>
  18 #include <linux/smp_lock.h>
  19 #include <net/net_namespace.h>
  20
  21 #include "hysdn_defs.h"
  22
  23 static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
  24
  25 #define INFO_OUT_LEN 80         /* length of info line including lf */
  26
  27 /********************************************************/
  28 /* defines and data structure for conf write operations */
  29 /********************************************************/
  30 #define CONF_STATE_DETECT 0     /* waiting for detect */
  31 #define CONF_STATE_CONF   1     /* writing config data */
  32 #define CONF_STATE_POF    2     /* writing pof data */
  33 #define CONF_LINE_LEN   255     /* 255 chars max */
  34
  35 struct conf_writedata {
  36         hysdn_card *card;       /* card the device is connected to */
  37         int buf_size;           /* actual number of bytes in the buffer */
  38         int needed_size;        /* needed size when reading pof */
  39         int state;              /* actual interface states from above constants */
  40         unsigned char conf_line[CONF_LINE_LEN]; /* buffered conf line */
  41         unsigned short channel;         /* active channel number */
  42         unsigned char *pof_buffer;      /* buffer when writing pof */
  43 };
  44
  45 /***********************************************************************/
  46 /* process_line parses one config line and transfers it to the card if */
  47 /* necessary.                                                          */
  48 /* if the return value is negative an error occurred.                   */
  49 /***********************************************************************/
  50 static int
  51 process_line(struct conf_writedata *cnf)
  52 {
  53         unsigned char *cp = cnf->conf_line;
  54         int i;
  55
  56         if (cnf->card->debug_flags & LOG_CNF_LINE)
  57                 hysdn_addlog(cnf->card, "conf line: %s", cp);
  58
  59         if (*cp == '-') {       /* option */
  60                 cp++;           /* point to option char */
  61
  62                 if (*cp++ != 'c')
  63                         return (0);     /* option unknown or used */
  64                 i = 0;          /* start value for channel */
  65                 while ((*cp <= '9') && (*cp >= '0'))
  66                         i = i * 10 + *cp++ - '0';       /* get decimal number */
  67                 if (i > 65535) {
  68                         if (cnf->card->debug_flags & LOG_CNF_MISC)
  69                                 hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
  70                         return (-ERR_INV_CHAN);         /* invalid channel */
  71                 }
  72                 cnf->channel = i & 0xFFFF;      /* set new channel number */
  73                 return (0);     /* success */
  74         }                       /* option */
  75         if (*cp == '*') {       /* line to send */
  76                 if (cnf->card->debug_flags & LOG_CNF_DATA)
  77                         hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
  78                 return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
  79                                          cnf->channel));        /* send the line without * */
  80         }                       /* line to send */
  81         return (0);
  82 }                               /* process_line */
  83
  84 /***********************************/
  85 /* conf file operations and tables */
  86 /***********************************/
  87
  88 /****************************************************/
  89 /* write conf file -> boot or send cfg line to card */
  90 /****************************************************/
  91 static ssize_t
  92 hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
  93 {
  94         struct conf_writedata *cnf;
  95         int i;
  96         unsigned char ch, *cp;
  97
  98         if (!count)
  99                 return (0);     /* nothing to handle */
 100
 101         if (!(cnf = file->private_data))
 102                 return (-EFAULT);       /* should never happen */
 103
 104         if (cnf->state == CONF_STATE_DETECT) {  /* auto detect cnf or pof data */
 105                 if (copy_from_user(&ch, buf, 1))        /* get first char for detect */
 106                         return (-EFAULT);
 107
 108                 if (ch == 0x1A) {
 109                         /* we detected a pof file */
 110                         if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
 111                                 return (cnf->needed_size);      /* an error occurred -> exit */
 112                         cnf->buf_size = 0;      /* buffer is empty */
 113                         cnf->state = CONF_STATE_POF;    /* new state */
 114                 } else {
 115                         /* conf data has been detected */
 116                         cnf->buf_size = 0;      /* buffer is empty */
 117                         cnf->state = CONF_STATE_CONF;   /* requested conf data write */
 118                         if (cnf->card->state != CARD_STATE_RUN)
 119                                 return (-ERR_NOT_BOOTED);
 120                         cnf->conf_line[CONF_LINE_LEN - 1] = 0;  /* limit string length */
 121                         cnf->channel = 4098;    /* default channel for output */
 122                 }
 123         }                       /* state was auto detect */
 124         if (cnf->state == CONF_STATE_POF) {     /* pof write active */
 125                 i = cnf->needed_size - cnf->buf_size;   /* bytes still missing for write */
 126                 if (i <= 0)
 127                         return (-EINVAL);       /* size error handling pof */
 128
 129                 if (i < count)
 130                         count = i;      /* limit requested number of bytes */
 131                 if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
 132                         return (-EFAULT);       /* error while copying */
 133                 cnf->buf_size += count;
 134
 135                 if (cnf->needed_size == cnf->buf_size) {
 136                         cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);  /* write data */
 137                         if (cnf->needed_size <= 0) {
 138                                 cnf->card->state = CARD_STATE_BOOTERR;  /* show boot error */
 139                                 return (cnf->needed_size);      /* an error occurred */
 140                         }
 141                         cnf->buf_size = 0;      /* buffer is empty again */
 142                 }
 143         }
 144         /* pof write active */
 145         else {                  /* conf write active */
 146
 147                 if (cnf->card->state != CARD_STATE_RUN) {
 148                         if (cnf->card->debug_flags & LOG_CNF_MISC)
 149                                 hysdn_addlog(cnf->card, "cnf write denied -> not booted");
 150                         return (-ERR_NOT_BOOTED);
 151                 }
 152                 i = (CONF_LINE_LEN - 1) - cnf->buf_size;        /* bytes available in buffer */
 153                 if (i > 0) {
 154                         /* copy remaining bytes into buffer */
 155
 156                         if (count > i)
 157                                 count = i;      /* limit transfer */
 158                         if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
 159                                 return (-EFAULT);       /* error while copying */
 160
 161                         i = count;      /* number of chars in buffer */
 162                         cp = cnf->conf_line + cnf->buf_size;
 163                         while (i) {
 164                                 /* search for end of line */
 165                                 if ((*cp < ' ') && (*cp != 9))
 166                                         break;  /* end of line found */
 167                                 cp++;
 168                                 i--;
 169                         }       /* search for end of line */
 170
 171                         if (i) {
 172                                 /* delimiter found */
 173                                 *cp++ = 0;      /* string termination */
 174                                 count -= (i - 1);       /* subtract remaining bytes from count */
 175                                 while ((i) && (*cp < ' ') && (*cp != 9)) {
 176                                         i--;    /* discard next char */
 177                                         count++;        /* mark as read */
 178                                         cp++;   /* next char */
 179                                 }
 180                                 cnf->buf_size = 0;      /* buffer is empty after transfer */
 181                                 if ((i = process_line(cnf)) < 0)        /* handle the line */
 182                                         count = i;      /* return the error */
 183                         }
 184                         /* delimiter found */
 185                         else {
 186                                 cnf->buf_size += count;         /* add chars to string */
 187                                 if (cnf->buf_size >= CONF_LINE_LEN - 1) {
 188                                         if (cnf->card->debug_flags & LOG_CNF_MISC)
 189                                                 hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
 190                                         return (-ERR_CONF_LONG);
 191                                 }
 192                         }       /* not delimited */
 193
 194                 }
 195                 /* copy remaining bytes into buffer */
 196                 else {
 197                         if (cnf->card->debug_flags & LOG_CNF_MISC)
 198                                 hysdn_addlog(cnf->card, "cnf line too long");
 199                         return (-ERR_CONF_LONG);
 200                 }
 201         }                       /* conf write active */
 202
 203         return (count);
 204 }                               /* hysdn_conf_write */
 205
 206 /*******************************************/
 207 /* read conf file -> output card info data */
 208 /*******************************************/
 209 static ssize_t
 210 hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
 211 {
 212         char *cp;
 213         int i;
 214
 215         if (file->f_mode & FMODE_READ) {
 216                 if (!(cp = file->private_data))
 217                         return (-EFAULT);       /* should never happen */
 218                 i = strlen(cp); /* get total string length */
 219                 if (*off < i) {
 220                         /* still bytes to transfer */
 221                         cp += *off;     /* point to desired data offset */
 222                         i -= *off;      /* remaining length */
 223                         if (i > count)
 224                                 i = count;      /* limit length to transfer */
 225                         if (copy_to_user(buf, cp, i))
 226                                 return (-EFAULT);       /* copy error */
 227                         *off += i;      /* adjust offset */
 228                 } else
 229                         return (0);
 230         } else
 231                 return (-EPERM);        /* no permission to read */
 232
 233         return (i);
 234 }                               /* hysdn_conf_read */
 235
 236 /******************/
 237 /* open conf file */
 238 /******************/
 239 static int
 240 hysdn_conf_open(struct inode *ino, struct file *filep)
 241 {
 242         hysdn_card *card;
 243         struct proc_dir_entry *pd;
 244         struct conf_writedata *cnf;
 245         char *cp, *tmp;
 246
 247         /* now search the addressed card */
 248         lock_kernel();
 249         card = card_root;
 250         while (card) {
 251                 pd = card->procconf;
 252                 if (pd == PDE(ino))
 253                         break;
 254                 card = card->next;      /* search next entry */
 255         }
 256         if (!card) {
 257                 unlock_kernel();
 258                 return (-ENODEV);       /* device is unknown/invalid */
 259         }
 260         if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
 261                 hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
 262                              filep->f_uid, filep->f_gid, filep->f_mode);
 263
 264         if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
 265                 /* write only access -> write boot file or conf line */
 266
 267                 if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
 268                         unlock_kernel();
 269                         return (-EFAULT);
 270                 }
 271                 cnf->card = card;
 272                 cnf->buf_size = 0;      /* nothing buffered */
 273                 cnf->state = CONF_STATE_DETECT;         /* start auto detect */
 274                 filep->private_data = cnf;
 275
 276         } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
 277                 /* read access -> output card info data */
 278
 279                 if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
 280                         unlock_kernel();
 281                         return (-EFAULT);       /* out of memory */
 282                 }
 283                 filep->private_data = tmp;      /* start of string */
 284
 285                 /* first output a headline */
 286                 sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
 287                 cp = tmp;       /* start of string */
 288                 while (*cp)
 289                         cp++;
 290                 while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
 291                         *cp++ = ' ';
 292                 *cp++ = '\n';
 293
 294                 /* and now the data */
 295                 sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d   %s",
 296                         card->myid,
 297                         card->bus,
 298                         PCI_SLOT(card->devfn),
 299                         card->brdtype,
 300                         card->irq,
 301                         card->iobase,
 302                         card->membase,
 303                         card->bchans,
 304                         card->faxchans,
 305                         card->state,
 306                         hysdn_net_getname(card));
 307                 while (*cp)
 308                         cp++;
 309                 while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
 310                         *cp++ = ' ';
 311                 *cp++ = '\n';
 312                 *cp = 0;        /* end of string */
 313         } else {                /* simultaneous read/write access forbidden ! */
 314                 unlock_kernel();
 315                 return (-EPERM);        /* no permission this time */
 316         }
 317         unlock_kernel();
 318         return nonseekable_open(ino, filep);
 319 }                               /* hysdn_conf_open */
 320
 321 /***************************/
 322 /* close a config file.    */
 323 /***************************/
 324 static int
 325 hysdn_conf_close(struct inode *ino, struct file *filep)
 326 {
 327         hysdn_card *card;
 328         struct conf_writedata *cnf;
 329         int retval = 0;
 330         struct proc_dir_entry *pd;
 331
 332         lock_kernel();
 333         /* search the addressed card */
 334         card = card_root;
 335         while (card) {
 336                 pd = card->procconf;
 337                 if (pd == PDE(ino))
 338                         break;
 339                 card = card->next;      /* search next entry */
 340         }
 341         if (!card) {
 342                 unlock_kernel();
 343                 return (-ENODEV);       /* device is unknown/invalid */
 344         }
 345         if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
 346                 hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
 347                              filep->f_uid, filep->f_gid, filep->f_mode);
 348
 349         if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
 350                 /* write only access -> write boot file or conf line */
 351                 if (filep->private_data) {
 352                         cnf = filep->private_data;
 353
 354                         if (cnf->state == CONF_STATE_POF)
 355                                 retval = pof_write_close(cnf->card);    /* close the pof write */
 356                         kfree(filep->private_data);     /* free allocated memory for buffer */
 357
 358                 }               /* handle write private data */
 359         } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
 360                 /* read access -> output card info data */
 361
 362                 kfree(filep->private_data);     /* release memory */
 363         }
 364         unlock_kernel();
 365         return (retval);
 366 }                               /* hysdn_conf_close */
 367
 368 /******************************************************/
 369 /* table for conf filesystem functions defined above. */
 370 /******************************************************/
 371 static const struct file_operations conf_fops =
 372 {
 373         .owner          = THIS_MODULE,
 374         .llseek         = no_llseek,
 375         .read           = hysdn_conf_read,
 376         .write          = hysdn_conf_write,
 377         .open           = hysdn_conf_open,
 378         .release        = hysdn_conf_close,
 379 };
 380
 381 /*****************************/
 382 /* hysdn subdir in /proc/net */
 383 /*****************************/
 384 struct proc_dir_entry *hysdn_proc_entry = NULL;
 385
 386 /*******************************************************************************/
 387 /* hysdn_procconf_init is called when the module is loaded and after the cards */
 388 /* have been detected. The needed proc dir and card config files are created.  */
 389 /* The log init is called at last.                                             */
 390 /*******************************************************************************/
 391 int
 392 hysdn_procconf_init(void)
 393 {
 394         hysdn_card *card;
 395         unsigned char conf_name[20];
 396
 397         hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net);
 398         if (!hysdn_proc_entry) {
 399                 printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
 400                 return (-1);
 401         }
 402         card = card_root;       /* point to first card */
 403         while (card) {
 404
 405                 sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
 406                 if ((card->procconf = (void *) proc_create(conf_name,
 407                                                 S_IFREG | S_IRUGO | S_IWUSR,
 408                                                 hysdn_proc_entry)) != NULL) {
 409                         hysdn_proclog_init(card);       /* init the log file entry */
 410                 }
 411                 card = card->next;      /* next entry */
 412         }
 413
 414         printk(KERN_NOTICE "HYSDN: procfs Rev. %s initialised\n", hysdn_getrev(hysdn_procconf_revision));
 415         return (0);
 416 }                               /* hysdn_procconf_init */
 417
 418 /*************************************************************************************/
 419 /* hysdn_procconf_release is called when the module is unloaded and before the cards */
 420 /* resources are released. The module counter is assumed to be 0 !                   */
 421 /*************************************************************************************/
 422 void
 423 hysdn_procconf_release(void)
 424 {
 425         hysdn_card *card;
 426         unsigned char conf_name[20];
 427
 428         card = card_root;       /* start with first card */
 429         while (card) {
 430
 431                 sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
 432                 if (card->procconf)
 433                         remove_proc_entry(conf_name, hysdn_proc_entry);
 434
 435                 hysdn_proclog_release(card);    /* init the log file entry */
 436
 437                 card = card->next;      /* point to next card */
 438         }
 439
 440         remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net);
 441 }