2 * Touch Screen driver for Renesas MIGO-R Platform
4 * Copyright (c) 2008 Magnus Damm
5 * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
6 * Kenati Technologies Pvt Ltd.
8 * This file is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public
10 * License as published by the Free Software Foundation; either
11 * version 2 of the License, or (at your option) any later version.
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public
19 * License along with this library; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/input.h>
25 #include <linux/interrupt.h>
27 #include <linux/i2c.h>
28 #include <linux/timer.h>
30 #define EVENT_PENDOWN 1
31 #define EVENT_REPEAT 2
34 struct migor_ts_priv {
35 struct i2c_client *client;
36 struct input_dev *input;
37 struct delayed_work work;
41 static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
43 static const u_int8_t migor_ts_dis_seq[17] = { };
45 static void migor_ts_poscheck(struct work_struct *work)
47 struct migor_ts_priv *priv = container_of(work,
50 unsigned short xpos, ypos;
54 memset(buf, 0, sizeof(buf));
58 if (i2c_master_send(priv->client, buf, 1) != 1) {
59 dev_err(&priv->client->dev, "Unable to write i2c index\n");
63 /* Now do Page Read */
64 if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) {
65 dev_err(&priv->client->dev, "Unable to read i2c page\n");
69 ypos = ((buf[9] & 0x03) << 8 | buf[8]);
70 xpos = ((buf[11] & 0x03) << 8 | buf[10]);
73 if (event == EVENT_PENDOWN || event == EVENT_REPEAT) {
74 input_report_key(priv->input, BTN_TOUCH, 1);
75 input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
76 input_report_abs(priv->input, ABS_Y, xpos);
77 input_sync(priv->input);
78 } else if (event == EVENT_PENUP) {
79 input_report_key(priv->input, BTN_TOUCH, 0);
80 input_sync(priv->input);
83 enable_irq(priv->irq);
86 static irqreturn_t migor_ts_isr(int irq, void *dev_id)
88 struct migor_ts_priv *priv = dev_id;
90 /* the touch screen controller chip is hooked up to the cpu
91 * using i2c and a single interrupt line. the interrupt line
92 * is pulled low whenever someone taps the screen. to deassert
93 * the interrupt line we need to acknowledge the interrupt by
94 * communicating with the controller over the slow i2c bus.
96 * we can't acknowledge from interrupt context since the i2c
97 * bus controller may sleep, so we just disable the interrupt
98 * here and handle the acknowledge using delayed work.
101 disable_irq_nosync(irq);
102 schedule_delayed_work(&priv->work, HZ / 20);
108 static int migor_ts_open(struct input_dev *dev)
110 struct migor_ts_priv *priv = input_get_drvdata(dev);
111 struct i2c_client *client = priv->client;
114 /* enable controller */
115 count = i2c_master_send(client, migor_ts_ena_seq,
116 sizeof(migor_ts_ena_seq));
117 if (count != sizeof(migor_ts_ena_seq)) {
118 dev_err(&client->dev, "Unable to enable touchscreen.\n");
125 static void migor_ts_close(struct input_dev *dev)
127 struct migor_ts_priv *priv = input_get_drvdata(dev);
128 struct i2c_client *client = priv->client;
130 disable_irq(priv->irq);
132 /* cancel pending work and wait for migor_ts_poscheck() to finish */
133 if (cancel_delayed_work_sync(&priv->work)) {
135 * if migor_ts_poscheck was canceled we need to enable IRQ
136 * here to balance disable done in migor_ts_isr.
138 enable_irq(priv->irq);
141 /* disable controller */
142 i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
144 enable_irq(priv->irq);
147 static int migor_ts_probe(struct i2c_client *client,
148 const struct i2c_device_id *idp)
150 struct migor_ts_priv *priv;
151 struct input_dev *input;
154 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
156 dev_err(&client->dev, "failed to allocate driver data\n");
161 dev_set_drvdata(&client->dev, priv);
163 input = input_allocate_device();
165 dev_err(&client->dev, "Failed to allocate input device.\n");
170 input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
171 input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
173 input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
174 input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
176 input->name = client->driver_name;
177 input->id.bustype = BUS_I2C;
178 input->dev.parent = &client->dev;
180 input->open = migor_ts_open;
181 input->close = migor_ts_close;
183 input_set_drvdata(input, priv);
185 priv->client = client;
187 INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck);
188 priv->irq = client->irq;
190 error = input_register_device(input);
194 error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
195 client->driver_name, priv);
197 dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
204 input_unregister_device(input);
205 input = NULL; /* so we dont try to free it below */
207 input_free_device(input);
210 dev_set_drvdata(&client->dev, NULL);
214 static int migor_ts_remove(struct i2c_client *client)
216 struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
218 free_irq(priv->irq, priv);
219 input_unregister_device(priv->input);
222 dev_set_drvdata(&client->dev, NULL);
227 static struct i2c_driver migor_ts_driver = {
231 .probe = migor_ts_probe,
232 .remove = migor_ts_remove,
235 static int __init migor_ts_init(void)
237 return i2c_add_driver(&migor_ts_driver);
240 static void __exit migor_ts_exit(void)
242 i2c_del_driver(&migor_ts_driver);
245 MODULE_DESCRIPTION("MigoR Touchscreen driver");
246 MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
247 MODULE_LICENSE("GPL");
249 module_init(migor_ts_init);
250 module_exit(migor_ts_exit);