2 * ohci1394.c - driver for OHCI 1394 boards
3 * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>
4 * Gord Peters <GordPeters@smarttech.com>
5 * 2001 Ben Collins <bcollins@debian.org>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software Foundation,
19 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 * Things known to be working:
24 * . Async Request Transmit
25 * . Async Response Receive
26 * . Async Request Receive
27 * . Async Response Transmit
29 * . DMA mmap for iso receive
30 * . Config ROM generation
32 * Things implemented, but still in test phase:
34 * . Async Stream Packets Transmit (Receive done via Iso interface)
36 * Things not implemented:
37 * . DMA error recovery
40 * . devctl BUS_RESET arg confusion (reset type or root holdoff?)
41 * added LONG_RESET_ROOT and SHORT_RESET_ROOT for root holdoff --kk
47 * Adam J Richter <adam@yggdrasil.com>
48 * . Use of pci_class to find device
50 * Emilie Chung <emilie.chung@axis.com>
51 * . Tip on Async Request Filter
53 * Pascal Drolet <pascal.drolet@informission.ca>
54 * . Various tips for optimization and functionnalities
56 * Robert Ficklin <rficklin@westengineering.com>
57 * . Loop in irq_handler
59 * James Goodwin <jamesg@Filanet.com>
60 * . Various tips on initialization, self-id reception, etc.
62 * Albrecht Dress <ad@mpifr-bonn.mpg.de>
63 * . Apple PowerBook detection
65 * Daniel Kobras <daniel.kobras@student.uni-tuebingen.de>
66 * . Reset the board properly before leaving + misc cleanups
68 * Leon van Stuivenberg <leonvs@iae.nl>
71 * Ben Collins <bcollins@debian.org>
72 * . Working big-endian support
73 * . Updated to 2.4.x module scheme (PCI aswell)
74 * . Config ROM generation
76 * Manfred Weihs <weihs@ict.tuwien.ac.at>
77 * . Reworked code for initiating bus resets
78 * (long, short, with or without hold-off)
80 * Nandu Santhi <contactnandu@users.sourceforge.net>
81 * . Added support for nVidia nForce2 onboard Firewire chipset
85 #include <linux/kernel.h>
86 #include <linux/list.h>
87 #include <linux/slab.h>
88 #include <linux/interrupt.h>
89 #include <linux/wait.h>
90 #include <linux/errno.h>
91 #include <linux/module.h>
92 #include <linux/moduleparam.h>
93 #include <linux/pci.h>
95 #include <linux/poll.h>
96 #include <asm/byteorder.h>
97 #include <asm/atomic.h>
98 #include <asm/uaccess.h>
99 #include <linux/delay.h>
100 #include <linux/spinlock.h>
102 #include <asm/pgtable.h>
103 #include <asm/page.h>
105 #include <linux/types.h>
106 #include <linux/vmalloc.h>
107 #include <linux/init.h>
109 #ifdef CONFIG_PPC_PMAC
110 #include <asm/machdep.h>
111 #include <asm/pmac_feature.h>
112 #include <asm/prom.h>
113 #include <asm/pci-bridge.h>
117 #include "ieee1394.h"
118 #include "ieee1394_types.h"
122 #include "ieee1394_core.h"
123 #include "highlevel.h"
124 #include "ohci1394.h"
126 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
127 #define OHCI1394_DEBUG
134 #ifdef OHCI1394_DEBUG
135 #define DBGMSG(fmt, args...) \
136 printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
138 #define DBGMSG(fmt, args...) do {} while (0)
141 /* print general (card independent) information */
142 #define PRINT_G(level, fmt, args...) \
143 printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args)
145 /* print card specific information */
146 #define PRINT(level, fmt, args...) \
147 printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
149 /* Module Parameters */
150 static int phys_dma = 1;
151 module_param(phys_dma, int, 0444);
152 MODULE_PARM_DESC(phys_dma, "Enable physical DMA (default = 1).");
154 static void dma_trm_tasklet(unsigned long data);
155 static void dma_trm_reset(struct dma_trm_ctx *d);
157 static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
158 enum context_type type, int ctx, int num_desc,
159 int buf_size, int split_buf_size, int context_base);
160 static void free_dma_rcv_ctx(struct dma_rcv_ctx *d);
162 static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
163 enum context_type type, int ctx, int num_desc,
166 static void ohci1394_pci_remove(struct pci_dev *pdev);
168 #ifndef __LITTLE_ENDIAN
169 static const size_t hdr_sizes[] = {
170 3, /* TCODE_WRITEQ */
171 4, /* TCODE_WRITEB */
172 3, /* TCODE_WRITE_RESPONSE */
176 3, /* TCODE_READQ_RESPONSE */
177 4, /* TCODE_READB_RESPONSE */
178 1, /* TCODE_CYCLE_START */
179 4, /* TCODE_LOCK_REQUEST */
180 2, /* TCODE_ISO_DATA */
181 4, /* TCODE_LOCK_RESPONSE */
182 /* rest is reserved or link-internal */
185 static inline void header_le32_to_cpu(quadlet_t *data, unsigned char tcode)
189 if (unlikely(tcode >= ARRAY_SIZE(hdr_sizes)))
192 size = hdr_sizes[tcode];
194 data[size] = le32_to_cpu(data[size]);
197 #define header_le32_to_cpu(w,x) do {} while (0)
198 #endif /* !LITTLE_ENDIAN */
200 /***********************************
201 * IEEE-1394 functionality section *
202 ***********************************/
204 static u8 get_phy_reg(struct ti_ohci *ohci, u8 addr)
210 spin_lock_irqsave (&ohci->phy_reg_lock, flags);
212 reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
214 for (i = 0; i < OHCI_LOOP_COUNT; i++) {
215 if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000)
221 r = reg_read(ohci, OHCI1394_PhyControl);
223 if (i >= OHCI_LOOP_COUNT)
224 PRINT (KERN_ERR, "Get PHY Reg timeout [0x%08x/0x%08x/%d]",
225 r, r & 0x80000000, i);
227 spin_unlock_irqrestore (&ohci->phy_reg_lock, flags);
229 return (r & 0x00ff0000) >> 16;
232 static void set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
238 spin_lock_irqsave (&ohci->phy_reg_lock, flags);
240 reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
242 for (i = 0; i < OHCI_LOOP_COUNT; i++) {
243 r = reg_read(ohci, OHCI1394_PhyControl);
244 if (!(r & 0x00004000))
250 if (i == OHCI_LOOP_COUNT)
251 PRINT (KERN_ERR, "Set PHY Reg timeout [0x%08x/0x%08x/%d]",
252 r, r & 0x00004000, i);
254 spin_unlock_irqrestore (&ohci->phy_reg_lock, flags);
259 /* Or's our value into the current value */
260 static void set_phy_reg_mask(struct ti_ohci *ohci, u8 addr, u8 data)
264 old = get_phy_reg (ohci, addr);
266 set_phy_reg (ohci, addr, old);
271 static void handle_selfid(struct ti_ohci *ohci, struct hpsb_host *host,
272 int phyid, int isroot)
274 quadlet_t *q = ohci->selfid_buf_cpu;
275 quadlet_t self_id_count=reg_read(ohci, OHCI1394_SelfIDCount);
279 /* Check status of self-id reception */
281 if (ohci->selfid_swap)
282 q0 = le32_to_cpu(q[0]);
286 if ((self_id_count & 0x80000000) ||
287 ((self_id_count & 0x00FF0000) != (q0 & 0x00FF0000))) {
289 "Error in reception of SelfID packets [0x%08x/0x%08x] (count: %d)",
290 self_id_count, q0, ohci->self_id_errors);
292 /* Tip by James Goodwin <jamesg@Filanet.com>:
293 * We had an error, generate another bus reset in response. */
294 if (ohci->self_id_errors<OHCI1394_MAX_SELF_ID_ERRORS) {
295 set_phy_reg_mask (ohci, 1, 0x40);
296 ohci->self_id_errors++;
299 "Too many errors on SelfID error reception, giving up!");
304 /* SelfID Ok, reset error counter. */
305 ohci->self_id_errors = 0;
307 size = ((self_id_count & 0x00001FFC) >> 2) - 1;
311 if (ohci->selfid_swap) {
312 q0 = le32_to_cpu(q[0]);
313 q1 = le32_to_cpu(q[1]);
320 DBGMSG ("SelfID packet 0x%x received", q0);
321 hpsb_selfid_received(host, cpu_to_be32(q0));
322 if (((q0 & 0x3f000000) >> 24) == phyid)
323 DBGMSG ("SelfID for this node is 0x%08x", q0);
326 "SelfID is inconsistent [0x%08x/0x%08x]", q0, q1);
332 DBGMSG("SelfID complete");
337 static void ohci_soft_reset(struct ti_ohci *ohci) {
340 reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
342 for (i = 0; i < OHCI_LOOP_COUNT; i++) {
343 if (!(reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_softReset))
347 DBGMSG ("Soft reset finished");
351 /* Generate the dma receive prgs and start the context */
352 static void initialize_dma_rcv_ctx(struct dma_rcv_ctx *d, int generate_irq)
354 struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
357 ohci1394_stop_context(ohci, d->ctrlClear, NULL);
359 for (i=0; i<d->num_desc; i++) {
362 c = DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | DMA_CTL_BRANCH;
366 d->prg_cpu[i]->control = cpu_to_le32(c | d->buf_size);
368 /* End of descriptor list? */
369 if (i + 1 < d->num_desc) {
370 d->prg_cpu[i]->branchAddress =
371 cpu_to_le32((d->prg_bus[i+1] & 0xfffffff0) | 0x1);
373 d->prg_cpu[i]->branchAddress =
374 cpu_to_le32((d->prg_bus[0] & 0xfffffff0));
377 d->prg_cpu[i]->address = cpu_to_le32(d->buf_bus[i]);
378 d->prg_cpu[i]->status = cpu_to_le32(d->buf_size);
384 if (d->type == DMA_CTX_ISO) {
385 /* Clear contextControl */
386 reg_write(ohci, d->ctrlClear, 0xffffffff);
388 /* Set bufferFill, isochHeader, multichannel for IR context */
389 reg_write(ohci, d->ctrlSet, 0xd0000000);
391 /* Set the context match register to match on all tags */
392 reg_write(ohci, d->ctxtMatch, 0xf0000000);
394 /* Clear the multi channel mask high and low registers */
395 reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, 0xffffffff);
396 reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, 0xffffffff);
398 /* Set up isoRecvIntMask to generate interrupts */
399 reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << d->ctx);
402 /* Tell the controller where the first AR program is */
403 reg_write(ohci, d->cmdPtr, d->prg_bus[0] | 0x1);
406 reg_write(ohci, d->ctrlSet, 0x00008000);
408 DBGMSG("Receive DMA ctx=%d initialized", d->ctx);
411 /* Initialize the dma transmit context */
412 static void initialize_dma_trm_ctx(struct dma_trm_ctx *d)
414 struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
416 /* Stop the context */
417 ohci1394_stop_context(ohci, d->ctrlClear, NULL);
421 d->free_prgs = d->num_desc;
422 d->branchAddrPtr = NULL;
423 INIT_LIST_HEAD(&d->fifo_list);
424 INIT_LIST_HEAD(&d->pending_list);
426 if (d->type == DMA_CTX_ISO) {
427 /* enable interrupts */
428 reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << d->ctx);
431 DBGMSG("Transmit DMA ctx=%d initialized", d->ctx);
434 /* Count the number of available iso contexts */
435 static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg)
440 reg_write(ohci, reg, 0xffffffff);
441 tmp = reg_read(ohci, reg);
443 DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp);
445 /* Count the number of contexts */
446 for (i=0; i<32; i++) {
453 /* Global initialization */
454 static void ohci_initialize(struct ti_ohci *ohci)
459 spin_lock_init(&ohci->phy_reg_lock);
461 /* Put some defaults to these undefined bus options */
462 buf = reg_read(ohci, OHCI1394_BusOptions);
463 buf |= 0x60000000; /* Enable CMC and ISC */
464 if (hpsb_disable_irm)
467 buf |= 0x80000000; /* Enable IRMC */
468 buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */
469 buf &= ~0x18000000; /* Disable PMC and BMC */
470 reg_write(ohci, OHCI1394_BusOptions, buf);
472 /* Set the bus number */
473 reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0);
475 /* Enable posted writes */
476 reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_postedWriteEnable);
478 /* Clear link control register */
479 reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
481 /* Enable cycle timer and cycle master and set the IRM
482 * contender bit in our self ID packets if appropriate. */
483 reg_write(ohci, OHCI1394_LinkControlSet,
484 OHCI1394_LinkControl_CycleTimerEnable |
485 OHCI1394_LinkControl_CycleMaster);
486 i = get_phy_reg(ohci, 4) | PHY_04_LCTRL;
487 if (hpsb_disable_irm)
488 i &= ~PHY_04_CONTENDER;
490 i |= PHY_04_CONTENDER;
491 set_phy_reg(ohci, 4, i);
493 /* Set up self-id dma buffer */
494 reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus);
497 reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID);
499 /* Set the Config ROM mapping register */
500 reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus);
502 /* Now get our max packet size */
503 ohci->max_packet_size =
504 1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1);
506 /* Clear the interrupt mask */
507 reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
508 reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
510 /* Clear the interrupt mask */
511 reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
512 reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
514 /* Initialize AR dma */
515 initialize_dma_rcv_ctx(&ohci->ar_req_context, 0);
516 initialize_dma_rcv_ctx(&ohci->ar_resp_context, 0);
518 /* Initialize AT dma */
519 initialize_dma_trm_ctx(&ohci->at_req_context);
520 initialize_dma_trm_ctx(&ohci->at_resp_context);
522 /* Accept AR requests from all nodes */
523 reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
525 /* Set the address range of the physical response unit.
526 * Most controllers do not implement it as a writable register though.
527 * They will keep a hardwired offset of 0x00010000 and show 0x0 as
529 * To actually enable physical responses is the job of our interrupt
530 * handler which programs the physical request filter. */
531 reg_write(ohci, OHCI1394_PhyUpperBound,
532 OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16);
534 DBGMSG("physUpperBoundOffset=%08x",
535 reg_read(ohci, OHCI1394_PhyUpperBound));
537 /* Specify AT retries */
538 reg_write(ohci, OHCI1394_ATRetries,
539 OHCI1394_MAX_AT_REQ_RETRIES |
540 (OHCI1394_MAX_AT_RESP_RETRIES<<4) |
541 (OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
543 /* We don't want hardware swapping */
544 reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
546 /* Enable interrupts */
547 reg_write(ohci, OHCI1394_IntMaskSet,
548 OHCI1394_unrecoverableError |
549 OHCI1394_masterIntEnable |
551 OHCI1394_selfIDComplete |
554 OHCI1394_respTxComplete |
555 OHCI1394_reqTxComplete |
558 OHCI1394_postedWriteErr |
559 OHCI1394_cycleTooLong |
560 OHCI1394_cycleInconsistent);
563 reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
565 buf = reg_read(ohci, OHCI1394_Version);
566 PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%d] "
567 "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
568 ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
569 ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), ohci->dev->irq,
570 (unsigned long long)pci_resource_start(ohci->dev, 0),
571 (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
572 ohci->max_packet_size,
573 ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx);
575 /* Check all of our ports to make sure that if anything is
576 * connected, we enable that port. */
577 num_ports = get_phy_reg(ohci, 2) & 0xf;
578 for (i = 0; i < num_ports; i++) {
581 set_phy_reg(ohci, 7, i);
582 status = get_phy_reg(ohci, 8);
585 set_phy_reg(ohci, 8, status & ~1);
588 /* Serial EEPROM Sanity check. */
589 if ((ohci->max_packet_size < 512) ||
590 (ohci->max_packet_size > 4096)) {
591 /* Serial EEPROM contents are suspect, set a sane max packet
592 * size and print the raw contents for bug reports if verbose
593 * debug is enabled. */
594 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
598 PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, "
599 "attempting to set max_packet_size to 512 bytes");
600 reg_write(ohci, OHCI1394_BusOptions,
601 (reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002);
602 ohci->max_packet_size = 512;
603 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
604 PRINT(KERN_DEBUG, " EEPROM Present: %d",
605 (reg_read(ohci, OHCI1394_Version) >> 24) & 0x1);
606 reg_write(ohci, OHCI1394_GUID_ROM, 0x80000000);
610 (reg_read(ohci, OHCI1394_GUID_ROM) & 0x80000000)); i++)
613 for (i = 0; i < 0x20; i++) {
614 reg_write(ohci, OHCI1394_GUID_ROM, 0x02000000);
615 PRINT(KERN_DEBUG, " EEPROM %02x: %02x", i,
616 (reg_read(ohci, OHCI1394_GUID_ROM) >> 16) & 0xff);
623 * Insert a packet in the DMA fifo and generate the DMA prg
624 * FIXME: rewrite the program in order to accept packets crossing
626 * check also that a single dma descriptor doesn't cross a
629 static void insert_packet(struct ti_ohci *ohci,
630 struct dma_trm_ctx *d, struct hpsb_packet *packet)
633 int idx = d->prg_ind;
635 DBGMSG("Inserting packet for node " NODE_BUS_FMT
636 ", tlabel=%d, tcode=0x%x, speed=%d",
637 NODE_BUS_ARGS(ohci->host, packet->node_id), packet->tlabel,
638 packet->tcode, packet->speed_code);
640 d->prg_cpu[idx]->begin.address = 0;
641 d->prg_cpu[idx]->begin.branchAddress = 0;
643 if (d->type == DMA_CTX_ASYNC_RESP) {
645 * For response packets, we need to put a timeout value in
646 * the 16 lower bits of the status... let's try 1 sec timeout
648 cycleTimer = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
649 d->prg_cpu[idx]->begin.status = cpu_to_le32(
650 (((((cycleTimer>>25)&0x7)+1)&0x7)<<13) |
651 ((cycleTimer&0x01fff000)>>12));
653 DBGMSG("cycleTimer: %08x timeStamp: %08x",
654 cycleTimer, d->prg_cpu[idx]->begin.status);
656 d->prg_cpu[idx]->begin.status = 0;
658 if ( (packet->type == hpsb_async) || (packet->type == hpsb_raw) ) {
660 if (packet->type == hpsb_raw) {
661 d->prg_cpu[idx]->data[0] = cpu_to_le32(OHCI1394_TCODE_PHY<<4);
662 d->prg_cpu[idx]->data[1] = cpu_to_le32(packet->header[0]);
663 d->prg_cpu[idx]->data[2] = cpu_to_le32(packet->header[1]);
665 d->prg_cpu[idx]->data[0] = packet->speed_code<<16 |
666 (packet->header[0] & 0xFFFF);
668 if (packet->tcode == TCODE_ISO_DATA) {
669 /* Sending an async stream packet */
670 d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000;
672 /* Sending a normal async request or response */
673 d->prg_cpu[idx]->data[1] =
674 (packet->header[1] & 0xFFFF) |
675 (packet->header[0] & 0xFFFF0000);
676 d->prg_cpu[idx]->data[2] = packet->header[2];
677 d->prg_cpu[idx]->data[3] = packet->header[3];
679 header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
682 if (packet->data_size) { /* block transmit */
683 if (packet->tcode == TCODE_STREAM_DATA){
684 d->prg_cpu[idx]->begin.control =
685 cpu_to_le32(DMA_CTL_OUTPUT_MORE |
686 DMA_CTL_IMMEDIATE | 0x8);
688 d->prg_cpu[idx]->begin.control =
689 cpu_to_le32(DMA_CTL_OUTPUT_MORE |
690 DMA_CTL_IMMEDIATE | 0x10);
692 d->prg_cpu[idx]->end.control =
693 cpu_to_le32(DMA_CTL_OUTPUT_LAST |
698 * Check that the packet data buffer
699 * does not cross a page boundary.
701 * XXX Fix this some day. eth1394 seems to trigger
702 * it, but ignoring it doesn't seem to cause a
706 if (cross_bound((unsigned long)packet->data,
707 packet->data_size)>0) {
708 /* FIXME: do something about it */
710 "%s: packet data addr: %p size %Zd bytes "
711 "cross page boundary", __func__,
712 packet->data, packet->data_size);
715 d->prg_cpu[idx]->end.address = cpu_to_le32(
716 pci_map_single(ohci->dev, packet->data,
720 d->prg_cpu[idx]->end.branchAddress = 0;
721 d->prg_cpu[idx]->end.status = 0;
722 if (d->branchAddrPtr)
723 *(d->branchAddrPtr) =
724 cpu_to_le32(d->prg_bus[idx] | 0x3);
726 &(d->prg_cpu[idx]->end.branchAddress);
727 } else { /* quadlet transmit */
728 if (packet->type == hpsb_raw)
729 d->prg_cpu[idx]->begin.control =
730 cpu_to_le32(DMA_CTL_OUTPUT_LAST |
734 (packet->header_size + 4));
736 d->prg_cpu[idx]->begin.control =
737 cpu_to_le32(DMA_CTL_OUTPUT_LAST |
741 packet->header_size);
743 if (d->branchAddrPtr)
744 *(d->branchAddrPtr) =
745 cpu_to_le32(d->prg_bus[idx] | 0x2);
747 &(d->prg_cpu[idx]->begin.branchAddress);
750 } else { /* iso packet */
751 d->prg_cpu[idx]->data[0] = packet->speed_code<<16 |
752 (packet->header[0] & 0xFFFF);
753 d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000;
754 header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode);
756 d->prg_cpu[idx]->begin.control =
757 cpu_to_le32(DMA_CTL_OUTPUT_MORE |
758 DMA_CTL_IMMEDIATE | 0x8);
759 d->prg_cpu[idx]->end.control =
760 cpu_to_le32(DMA_CTL_OUTPUT_LAST |
765 d->prg_cpu[idx]->end.address = cpu_to_le32(
766 pci_map_single(ohci->dev, packet->data,
767 packet->data_size, PCI_DMA_TODEVICE));
769 d->prg_cpu[idx]->end.branchAddress = 0;
770 d->prg_cpu[idx]->end.status = 0;
771 DBGMSG("Iso xmit context info: header[%08x %08x]\n"
772 " begin=%08x %08x %08x %08x\n"
773 " %08x %08x %08x %08x\n"
774 " end =%08x %08x %08x %08x",
775 d->prg_cpu[idx]->data[0], d->prg_cpu[idx]->data[1],
776 d->prg_cpu[idx]->begin.control,
777 d->prg_cpu[idx]->begin.address,
778 d->prg_cpu[idx]->begin.branchAddress,
779 d->prg_cpu[idx]->begin.status,
780 d->prg_cpu[idx]->data[0],
781 d->prg_cpu[idx]->data[1],
782 d->prg_cpu[idx]->data[2],
783 d->prg_cpu[idx]->data[3],
784 d->prg_cpu[idx]->end.control,
785 d->prg_cpu[idx]->end.address,
786 d->prg_cpu[idx]->end.branchAddress,
787 d->prg_cpu[idx]->end.status);
788 if (d->branchAddrPtr)
789 *(d->branchAddrPtr) = cpu_to_le32(d->prg_bus[idx] | 0x3);
790 d->branchAddrPtr = &(d->prg_cpu[idx]->end.branchAddress);
794 /* queue the packet in the appropriate context queue */
795 list_add_tail(&packet->driver_list, &d->fifo_list);
796 d->prg_ind = (d->prg_ind + 1) % d->num_desc;
800 * This function fills the FIFO with the (eventual) pending packets
801 * and runs or wakes up the DMA prg if necessary.
803 * The function MUST be called with the d->lock held.
805 static void dma_trm_flush(struct ti_ohci *ohci, struct dma_trm_ctx *d)
807 struct hpsb_packet *packet, *ptmp;
808 int idx = d->prg_ind;
811 /* insert the packets into the dma fifo */
812 list_for_each_entry_safe(packet, ptmp, &d->pending_list, driver_list) {
816 /* For the first packet only */
818 z = (packet->data_size) ? 3 : 2;
820 /* Insert the packet */
821 list_del_init(&packet->driver_list);
822 insert_packet(ohci, d, packet);
825 /* Nothing must have been done, either no free_prgs or no packets */
829 /* Is the context running ? (should be unless it is
830 the first packet to be sent in this context) */
831 if (!(reg_read(ohci, d->ctrlSet) & 0x8000)) {
832 u32 nodeId = reg_read(ohci, OHCI1394_NodeID);
834 DBGMSG("Starting transmit DMA ctx=%d",d->ctx);
835 reg_write(ohci, d->cmdPtr, d->prg_bus[idx] | z);
837 /* Check that the node id is valid, and not 63 */
838 if (!(nodeId & 0x80000000) || (nodeId & 0x3f) == 63)
839 PRINT(KERN_ERR, "Running dma failed because Node ID is not valid");
841 reg_write(ohci, d->ctrlSet, 0x8000);
843 /* Wake up the dma context if necessary */
844 if (!(reg_read(ohci, d->ctrlSet) & 0x400))
845 DBGMSG("Waking transmit DMA ctx=%d",d->ctx);
847 /* do this always, to avoid race condition */
848 reg_write(ohci, d->ctrlSet, 0x1000);
854 /* Transmission of an async or iso packet */
855 static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
857 struct ti_ohci *ohci = host->hostdata;
858 struct dma_trm_ctx *d;
861 if (packet->data_size > ohci->max_packet_size) {
863 "Transmit packet size %Zd is too big",
868 if (packet->type == hpsb_raw)
869 d = &ohci->at_req_context;
870 else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA))
871 d = &ohci->at_resp_context;
873 d = &ohci->at_req_context;
875 spin_lock_irqsave(&d->lock,flags);
877 list_add_tail(&packet->driver_list, &d->pending_list);
879 dma_trm_flush(ohci, d);
881 spin_unlock_irqrestore(&d->lock,flags);
886 static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
888 struct ti_ohci *ohci = host->hostdata;
889 int retval = 0, phy_reg;
895 phy_reg = get_phy_reg(ohci, 5);
897 set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
900 phy_reg = get_phy_reg(ohci, 1);
902 set_phy_reg(ohci, 1, phy_reg); /* set IBR */
904 case SHORT_RESET_NO_FORCE_ROOT:
905 phy_reg = get_phy_reg(ohci, 1);
906 if (phy_reg & 0x80) {
908 set_phy_reg(ohci, 1, phy_reg); /* clear RHB */
911 phy_reg = get_phy_reg(ohci, 5);
913 set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
915 case LONG_RESET_NO_FORCE_ROOT:
916 phy_reg = get_phy_reg(ohci, 1);
919 set_phy_reg(ohci, 1, phy_reg); /* clear RHB, set IBR */
921 case SHORT_RESET_FORCE_ROOT:
922 phy_reg = get_phy_reg(ohci, 1);
923 if (!(phy_reg & 0x80)) {
925 set_phy_reg(ohci, 1, phy_reg); /* set RHB */
928 phy_reg = get_phy_reg(ohci, 5);
930 set_phy_reg(ohci, 5, phy_reg); /* set ISBR */
932 case LONG_RESET_FORCE_ROOT:
933 phy_reg = get_phy_reg(ohci, 1);
935 set_phy_reg(ohci, 1, phy_reg); /* set RHB and IBR */
942 case GET_CYCLE_COUNTER:
943 retval = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
946 case SET_CYCLE_COUNTER:
947 reg_write(ohci, OHCI1394_IsochronousCycleTimer, arg);
951 PRINT(KERN_ERR, "devctl command SET_BUS_ID err");
954 case ACT_CYCLE_MASTER:
956 /* check if we are root and other nodes are present */
957 u32 nodeId = reg_read(ohci, OHCI1394_NodeID);
958 if ((nodeId & (1<<30)) && (nodeId & 0x3f)) {
960 * enable cycleTimer, cycleMaster
962 DBGMSG("Cycle master enabled");
963 reg_write(ohci, OHCI1394_LinkControlSet,
964 OHCI1394_LinkControl_CycleTimerEnable |
965 OHCI1394_LinkControl_CycleMaster);
968 /* disable cycleTimer, cycleMaster, cycleSource */
969 reg_write(ohci, OHCI1394_LinkControlClear,
970 OHCI1394_LinkControl_CycleTimerEnable |
971 OHCI1394_LinkControl_CycleMaster |
972 OHCI1394_LinkControl_CycleSource);
976 case CANCEL_REQUESTS:
977 DBGMSG("Cancel request received");
978 dma_trm_reset(&ohci->at_req_context);
979 dma_trm_reset(&ohci->at_resp_context);
983 PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet",
990 /***********************************
991 * rawiso ISO reception *
992 ***********************************/
995 We use either buffer-fill or packet-per-buffer DMA mode. The DMA
996 buffer is split into "blocks" (regions described by one DMA
997 descriptor). Each block must be one page or less in size, and
998 must not cross a page boundary.
1000 There is one little wrinkle with buffer-fill mode: a packet that
1001 starts in the final block may wrap around into the first block. But
1002 the user API expects all packets to be contiguous. Our solution is
1003 to keep the very last page of the DMA buffer in reserve - if a
1004 packet spans the gap, we copy its tail into this page.
1007 struct ohci_iso_recv {
1008 struct ti_ohci *ohci;
1010 struct ohci1394_iso_tasklet task;
1013 enum { BUFFER_FILL_MODE = 0,
1014 PACKET_PER_BUFFER_MODE = 1 } dma_mode;
1016 /* memory and PCI mapping for the DMA descriptors */
1017 struct dma_prog_region prog;
1018 struct dma_cmd *block; /* = (struct dma_cmd*) prog.virt */
1020 /* how many DMA blocks fit in the buffer */
1021 unsigned int nblocks;
1023 /* stride of DMA blocks */
1024 unsigned int buf_stride;
1026 /* number of blocks to batch between interrupts */
1027 int block_irq_interval;
1029 /* block that DMA will finish next */
1032 /* (buffer-fill only) block that the reader will release next */
1035 /* (buffer-fill only) bytes of buffer the reader has released,
1036 less than one block */
1039 /* (buffer-fill only) buffer offset at which the next packet will appear */
1042 /* OHCI DMA context control registers */
1043 u32 ContextControlSet;
1044 u32 ContextControlClear;
1049 static void ohci_iso_recv_task(unsigned long data);
1050 static void ohci_iso_recv_stop(struct hpsb_iso *iso);
1051 static void ohci_iso_recv_shutdown(struct hpsb_iso *iso);
1052 static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync);
1053 static void ohci_iso_recv_program(struct hpsb_iso *iso);
1055 static int ohci_iso_recv_init(struct hpsb_iso *iso)
1057 struct ti_ohci *ohci = iso->host->hostdata;
1058 struct ohci_iso_recv *recv;
1062 recv = kmalloc(sizeof(*recv), GFP_KERNEL);
1066 iso->hostdata = recv;
1068 recv->task_active = 0;
1069 dma_prog_region_init(&recv->prog);
1072 /* use buffer-fill mode, unless irq_interval is 1
1073 (note: multichannel requires buffer-fill) */
1075 if (((iso->irq_interval == 1 && iso->dma_mode == HPSB_ISO_DMA_OLD_ABI) ||
1076 iso->dma_mode == HPSB_ISO_DMA_PACKET_PER_BUFFER) && iso->channel != -1) {
1077 recv->dma_mode = PACKET_PER_BUFFER_MODE;
1079 recv->dma_mode = BUFFER_FILL_MODE;
1082 /* set nblocks, buf_stride, block_irq_interval */
1084 if (recv->dma_mode == BUFFER_FILL_MODE) {
1085 recv->buf_stride = PAGE_SIZE;
1087 /* one block per page of data in the DMA buffer, minus the final guard page */
1088 recv->nblocks = iso->buf_size/PAGE_SIZE - 1;
1089 if (recv->nblocks < 3) {
1090 DBGMSG("ohci_iso_recv_init: DMA buffer too small");
1094 /* iso->irq_interval is in packets - translate that to blocks */
1095 if (iso->irq_interval == 1)
1096 recv->block_irq_interval = 1;
1098 recv->block_irq_interval = iso->irq_interval *
1099 ((recv->nblocks+1)/iso->buf_packets);
1100 if (recv->block_irq_interval*4 > recv->nblocks)
1101 recv->block_irq_interval = recv->nblocks/4;
1102 if (recv->block_irq_interval < 1)
1103 recv->block_irq_interval = 1;
1106 int max_packet_size;
1108 recv->nblocks = iso->buf_packets;
1109 recv->block_irq_interval = iso->irq_interval;
1110 if (recv->block_irq_interval * 4 > iso->buf_packets)
1111 recv->block_irq_interval = iso->buf_packets / 4;
1112 if (recv->block_irq_interval < 1)
1113 recv->block_irq_interval = 1;
1115 /* choose a buffer stride */
1116 /* must be a power of 2, and <= PAGE_SIZE */
1118 max_packet_size = iso->buf_size / iso->buf_packets;
1120 for (recv->buf_stride = 8; recv->buf_stride < max_packet_size;
1121 recv->buf_stride *= 2);
1123 if (recv->buf_stride*iso->buf_packets > iso->buf_size ||
1124 recv->buf_stride > PAGE_SIZE) {
1125 /* this shouldn't happen, but anyway... */
1126 DBGMSG("ohci_iso_recv_init: problem choosing a buffer stride");
1131 recv->block_reader = 0;
1132 recv->released_bytes = 0;
1133 recv->block_dma = 0;
1134 recv->dma_offset = 0;
1136 /* size of DMA program = one descriptor per block */
1137 if (dma_prog_region_alloc(&recv->prog,
1138 sizeof(struct dma_cmd) * recv->nblocks,
1142 recv->block = (struct dma_cmd*) recv->prog.kvirt;
1144 ohci1394_init_iso_tasklet(&recv->task,
1145 iso->channel == -1 ? OHCI_ISO_MULTICHANNEL_RECEIVE :
1147 ohci_iso_recv_task, (unsigned long) iso);
1149 if (ohci1394_register_iso_tasklet(recv->ohci, &recv->task) < 0) {
1154 recv->task_active = 1;
1156 /* recv context registers are spaced 32 bytes apart */
1157 ctx = recv->task.context;
1158 recv->ContextControlSet = OHCI1394_IsoRcvContextControlSet + 32 * ctx;
1159 recv->ContextControlClear = OHCI1394_IsoRcvContextControlClear + 32 * ctx;
1160 recv->CommandPtr = OHCI1394_IsoRcvCommandPtr + 32 * ctx;
1161 recv->ContextMatch = OHCI1394_IsoRcvContextMatch + 32 * ctx;
1163 if (iso->channel == -1) {
1164 /* clear multi-channel selection mask */
1165 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, 0xFFFFFFFF);
1166 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, 0xFFFFFFFF);
1169 /* write the DMA program */
1170 ohci_iso_recv_program(iso);
1172 DBGMSG("ohci_iso_recv_init: %s mode, DMA buffer is %lu pages"
1173 " (%u bytes), using %u blocks, buf_stride %u, block_irq_interval %d",
1174 recv->dma_mode == BUFFER_FILL_MODE ?
1175 "buffer-fill" : "packet-per-buffer",
1176 iso->buf_size/PAGE_SIZE, iso->buf_size,
1177 recv->nblocks, recv->buf_stride, recv->block_irq_interval);
1182 ohci_iso_recv_shutdown(iso);
1186 static void ohci_iso_recv_stop(struct hpsb_iso *iso)
1188 struct ohci_iso_recv *recv = iso->hostdata;
1190 /* disable interrupts */
1191 reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << recv->task.context);
1194 ohci1394_stop_context(recv->ohci, recv->ContextControlClear, NULL);
1197 static void ohci_iso_recv_shutdown(struct hpsb_iso *iso)
1199 struct ohci_iso_recv *recv = iso->hostdata;
1201 if (recv->task_active) {
1202 ohci_iso_recv_stop(iso);
1203 ohci1394_unregister_iso_tasklet(recv->ohci, &recv->task);
1204 recv->task_active = 0;
1207 dma_prog_region_free(&recv->prog);
1209 iso->hostdata = NULL;
1212 /* set up a "gapped" ring buffer DMA program */
1213 static void ohci_iso_recv_program(struct hpsb_iso *iso)
1215 struct ohci_iso_recv *recv = iso->hostdata;
1218 /* address of 'branch' field in previous DMA descriptor */
1219 u32 *prev_branch = NULL;
1221 for (blk = 0; blk < recv->nblocks; blk++) {
1224 /* the DMA descriptor */
1225 struct dma_cmd *cmd = &recv->block[blk];
1227 /* offset of the DMA descriptor relative to the DMA prog buffer */
1228 unsigned long prog_offset = blk * sizeof(struct dma_cmd);
1230 /* offset of this packet's data within the DMA buffer */
1231 unsigned long buf_offset = blk * recv->buf_stride;
1233 if (recv->dma_mode == BUFFER_FILL_MODE) {
1234 control = 2 << 28; /* INPUT_MORE */
1236 control = 3 << 28; /* INPUT_LAST */
1239 control |= 8 << 24; /* s = 1, update xferStatus and resCount */
1241 /* interrupt on last block, and at intervals */
1242 if (blk == recv->nblocks-1 || (blk % recv->block_irq_interval) == 0) {
1243 control |= 3 << 20; /* want interrupt */
1246 control |= 3 << 18; /* enable branch to address */
1247 control |= recv->buf_stride;
1249 cmd->control = cpu_to_le32(control);
1250 cmd->address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, buf_offset));
1251 cmd->branchAddress = 0; /* filled in on next loop */
1252 cmd->status = cpu_to_le32(recv->buf_stride);
1254 /* link the previous descriptor to this one */
1256 *prev_branch = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, prog_offset) | 1);
1259 prev_branch = &cmd->branchAddress;
1262 /* the final descriptor's branch address and Z should be left at 0 */
1265 /* listen or unlisten to a specific channel (multi-channel mode only) */
1266 static void ohci_iso_recv_change_channel(struct hpsb_iso *iso, unsigned char channel, int listen)
1268 struct ohci_iso_recv *recv = iso->hostdata;
1272 reg = listen ? OHCI1394_IRMultiChanMaskLoSet : OHCI1394_IRMultiChanMaskLoClear;
1275 reg = listen ? OHCI1394_IRMultiChanMaskHiSet : OHCI1394_IRMultiChanMaskHiClear;
1279 reg_write(recv->ohci, reg, (1 << i));
1281 /* issue a dummy read to force all PCI writes to be posted immediately */
1283 reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
1286 static void ohci_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask)
1288 struct ohci_iso_recv *recv = iso->hostdata;
1291 for (i = 0; i < 64; i++) {
1292 if (mask & (1ULL << i)) {
1294 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoSet, (1 << i));
1296 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiSet, (1 << (i-32)));
1299 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, (1 << i));
1301 reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, (1 << (i-32)));
1305 /* issue a dummy read to force all PCI writes to be posted immediately */
1307 reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
1310 static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync)
1312 struct ohci_iso_recv *recv = iso->hostdata;
1313 struct ti_ohci *ohci = recv->ohci;
1314 u32 command, contextMatch;
1316 reg_write(recv->ohci, recv->ContextControlClear, 0xFFFFFFFF);
1319 /* always keep ISO headers */
1320 command = (1 << 30);
1322 if (recv->dma_mode == BUFFER_FILL_MODE)
1323 command |= (1 << 31);
1325 reg_write(recv->ohci, recv->ContextControlSet, command);
1327 /* match on specified tags */
1328 contextMatch = tag_mask << 28;
1330 if (iso->channel == -1) {
1331 /* enable multichannel reception */
1332 reg_write(recv->ohci, recv->ContextControlSet, (1 << 28));
1334 /* listen on channel */
1335 contextMatch |= iso->channel;
1341 /* enable cycleMatch */
1342 reg_write(recv->ohci, recv->ContextControlSet, (1 << 29));
1344 /* set starting cycle */
1347 /* 'cycle' is only mod 8000, but we also need two 'seconds' bits -
1348 just snarf them from the current time */
1349 seconds = reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer) >> 25;
1351 /* advance one second to give some extra time for DMA to start */
1354 cycle |= (seconds & 3) << 13;
1356 contextMatch |= cycle << 12;
1360 /* set sync flag on first DMA descriptor */
1361 struct dma_cmd *cmd = &recv->block[recv->block_dma];
1362 cmd->control |= cpu_to_le32(DMA_CTL_WAIT);
1364 /* match sync field */
1365 contextMatch |= (sync&0xf)<<8;
1368 reg_write(recv->ohci, recv->ContextMatch, contextMatch);
1370 /* address of first descriptor block */
1371 command = dma_prog_region_offset_to_bus(&recv->prog,
1372 recv->block_dma * sizeof(struct dma_cmd));
1373 command |= 1; /* Z=1 */
1375 reg_write(recv->ohci, recv->CommandPtr, command);
1377 /* enable interrupts */
1378 reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskSet, 1 << recv->task.context);
1383 reg_write(recv->ohci, recv->ContextControlSet, 0x8000);
1385 /* issue a dummy read of the cycle timer register to force
1386 all PCI writes to be posted immediately */
1388 reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer);
1391 if (!(reg_read(recv->ohci, recv->ContextControlSet) & 0x8000)) {
1393 "Error starting IR DMA (ContextControl 0x%08x)\n",
1394 reg_read(recv->ohci, recv->ContextControlSet));
1401 static void ohci_iso_recv_release_block(struct ohci_iso_recv *recv, int block)
1403 /* re-use the DMA descriptor for the block */
1404 /* by linking the previous descriptor to it */
1407 int prev_i = (next_i == 0) ? (recv->nblocks - 1) : (next_i - 1);
1409 struct dma_cmd *next = &recv->block[next_i];
1410 struct dma_cmd *prev = &recv->block[prev_i];
1412 /* ignore out-of-range requests */
1413 if ((block < 0) || (block > recv->nblocks))
1416 /* 'next' becomes the new end of the DMA chain,
1417 so disable branch and enable interrupt */
1418 next->branchAddress = 0;
1419 next->control |= cpu_to_le32(3 << 20);
1420 next->status = cpu_to_le32(recv->buf_stride);
1422 /* link prev to next */
1423 prev->branchAddress = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog,
1424 sizeof(struct dma_cmd) * next_i)
1427 /* disable interrupt on previous DMA descriptor, except at intervals */
1428 if ((prev_i % recv->block_irq_interval) == 0) {
1429 prev->control |= cpu_to_le32(3 << 20); /* enable interrupt */
1431 prev->control &= cpu_to_le32(~(3<<20)); /* disable interrupt */
1435 /* wake up DMA in case it fell asleep */
1436 reg_write(recv->ohci, recv->ContextControlSet, (1 << 12));
1439 static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv,
1440 struct hpsb_iso_packet_info *info)
1442 /* release the memory where the packet was */
1443 recv->released_bytes += info->total_len;
1445 /* have we released enough memory for one block? */
1446 while (recv->released_bytes > recv->buf_stride) {
1447 ohci_iso_recv_release_block(recv, recv->block_reader);
1448 recv->block_reader = (recv->block_reader + 1) % recv->nblocks;
1449 recv->released_bytes -= recv->buf_stride;
1453 static inline void ohci_iso_recv_release(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info)
1455 struct ohci_iso_recv *recv = iso->hostdata;
1456 if (recv->dma_mode == BUFFER_FILL_MODE) {
1457 ohci_iso_recv_bufferfill_release(recv, info);
1459 ohci_iso_recv_release_block(recv, info - iso->infos);
1463 /* parse all packets from blocks that have been fully received */
1464 static void ohci_iso_recv_bufferfill_parse(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
1468 struct ti_ohci *ohci = recv->ohci;
1471 /* we expect the next parsable packet to begin at recv->dma_offset */
1472 /* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */
1474 unsigned int offset;
1475 unsigned short len, cycle, total_len;
1476 unsigned char channel, tag, sy;
1478 unsigned char *p = iso->data_buf.kvirt;
1480 unsigned int this_block = recv->dma_offset/recv->buf_stride;
1482 /* don't loop indefinitely */
1483 if (runaway++ > 100000) {
1484 atomic_inc(&iso->overflows);
1486 "IR DMA error - Runaway during buffer parsing!\n");
1490 /* stop parsing once we arrive at block_dma (i.e. don't get ahead of DMA) */
1491 if (this_block == recv->block_dma)
1496 /* parse data length, tag, channel, and sy */
1498 /* note: we keep our own local copies of 'len' and 'offset'
1499 so the user can't mess with them by poking in the mmap area */
1501 len = p[recv->dma_offset+2] | (p[recv->dma_offset+3] << 8);
1505 "IR DMA error - bogus 'len' value %u\n", len);
1508 channel = p[recv->dma_offset+1] & 0x3F;
1509 tag = p[recv->dma_offset+1] >> 6;
1510 sy = p[recv->dma_offset+0] & 0xF;
1512 /* advance to data payload */
1513 recv->dma_offset += 4;
1515 /* check for wrap-around */
1516 if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
1517 recv->dma_offset -= recv->buf_stride*recv->nblocks;
1520 /* dma_offset now points to the first byte of the data payload */
1521 offset = recv->dma_offset;
1523 /* advance to xferStatus/timeStamp */
1524 recv->dma_offset += len;
1526 total_len = len + 8; /* 8 bytes header+trailer in OHCI packet */
1527 /* payload is padded to 4 bytes */
1529 recv->dma_offset += 4 - (len%4);
1530 total_len += 4 - (len%4);
1533 /* check for wrap-around */
1534 if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
1535 /* uh oh, the packet data wraps from the last
1536 to the first DMA block - make the packet
1537 contiguous by copying its "tail" into the
1540 int guard_off = recv->buf_stride*recv->nblocks;
1541 int tail_len = len - (guard_off - offset);
1543 if (tail_len > 0 && tail_len < recv->buf_stride) {
1544 memcpy(iso->data_buf.kvirt + guard_off,
1545 iso->data_buf.kvirt,
1549 recv->dma_offset -= recv->buf_stride*recv->nblocks;
1552 /* parse timestamp */
1553 cycle = p[recv->dma_offset+0] | (p[recv->dma_offset+1]<<8);
1556 /* advance to next packet */
1557 recv->dma_offset += 4;
1559 /* check for wrap-around */
1560 if (recv->dma_offset >= recv->buf_stride*recv->nblocks) {
1561 recv->dma_offset -= recv->buf_stride*recv->nblocks;
1564 hpsb_iso_packet_received(iso, offset, len, total_len, cycle, channel, tag, sy);
1571 static void ohci_iso_recv_bufferfill_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
1574 struct ti_ohci *ohci = recv->ohci;
1576 /* loop over all blocks */
1577 for (loop = 0; loop < recv->nblocks; loop++) {
1579 /* check block_dma to see if it's done */
1580 struct dma_cmd *im = &recv->block[recv->block_dma];
1582 /* check the DMA descriptor for new writes to xferStatus */
1583 u16 xferstatus = le32_to_cpu(im->status) >> 16;
1585 /* rescount is the number of bytes *remaining to be written* in the block */
1586 u16 rescount = le32_to_cpu(im->status) & 0xFFFF;
1588 unsigned char event = xferstatus & 0x1F;
1591 /* nothing has happened to this block yet */
1595 if (event != 0x11) {
1596 atomic_inc(&iso->overflows);
1598 "IR DMA error - OHCI error code 0x%02x\n", event);
1601 if (rescount != 0) {
1602 /* the card is still writing to this block;
1603 we can't touch it until it's done */
1607 /* OK, the block is finished... */
1609 /* sync our view of the block */
1610 dma_region_sync_for_cpu(&iso->data_buf, recv->block_dma*recv->buf_stride, recv->buf_stride);
1612 /* reset the DMA descriptor */
1613 im->status = recv->buf_stride;
1615 /* advance block_dma */
1616 recv->block_dma = (recv->block_dma + 1) % recv->nblocks;
1618 if ((recv->block_dma+1) % recv->nblocks == recv->block_reader) {
1619 atomic_inc(&iso->overflows);
1620 DBGMSG("ISO reception overflow - "
1621 "ran out of DMA blocks");
1625 /* parse any packets that have arrived */
1626 ohci_iso_recv_bufferfill_parse(iso, recv);
1629 static void ohci_iso_recv_packetperbuf_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv)
1633 struct ti_ohci *ohci = recv->ohci;
1635 /* loop over the entire buffer */
1636 for (count = 0; count < recv->nblocks; count++) {
1639 /* pointer to the DMA descriptor */
1640 struct dma_cmd *il = ((struct dma_cmd*) recv->prog.kvirt) + iso->pkt_dma;
1642 /* check the DMA descriptor for new writes to xferStatus */
1643 u16 xferstatus = le32_to_cpu(il->status) >> 16;
1644 u16 rescount = le32_to_cpu(il->status) & 0xFFFF;
1646 unsigned char event = xferstatus & 0x1F;
1649 /* this packet hasn't come in yet; we are done for now */
1653 if (event == 0x11) {
1654 /* packet received successfully! */
1656 /* rescount is the number of bytes *remaining* in the packet buffer,
1657 after the packet was written */
1658 packet_len = recv->buf_stride - rescount;
1660 } else if (event == 0x02) {
1661 PRINT(KERN_ERR, "IR DMA error - packet too long for buffer\n");
1663 PRINT(KERN_ERR, "IR DMA error - OHCI error code 0x%02x\n", event);
1666 /* sync our view of the buffer */
1667 dma_region_sync_for_cpu(&iso->data_buf, iso->pkt_dma * recv->buf_stride, recv->buf_stride);
1669 /* record the per-packet info */
1671 /* iso header is 8 bytes ahead of the data payload */
1674 unsigned int offset;
1675 unsigned short cycle;
1676 unsigned char channel, tag, sy;
1678 offset = iso->pkt_dma * recv->buf_stride;
1679 hdr = iso->data_buf.kvirt + offset;
1681 /* skip iso header */
1685 cycle = (hdr[0] | (hdr[1] << 8)) & 0x1FFF;
1686 channel = hdr[5] & 0x3F;
1690 hpsb_iso_packet_received(iso, offset, packet_len,
1691 recv->buf_stride, cycle, channel, tag, sy);
1694 /* reset the DMA descriptor */
1695 il->status = recv->buf_stride;
1698 recv->block_dma = iso->pkt_dma;
1706 static void ohci_iso_recv_task(unsigned long data)
1708 struct hpsb_iso *iso = (struct hpsb_iso*) data;
1709 struct ohci_iso_recv *recv = iso->hostdata;
1711 if (recv->dma_mode == BUFFER_FILL_MODE)
1712 ohci_iso_recv_bufferfill_task(iso, recv);
1714 ohci_iso_recv_packetperbuf_task(iso, recv);
1717 /***********************************
1718 * rawiso ISO transmission *
1719 ***********************************/
1721 struct ohci_iso_xmit {
1722 struct ti_ohci *ohci;
1723 struct dma_prog_region prog;
1724 struct ohci1394_iso_tasklet task;
1729 u32 ContextControlSet;
1730 u32 ContextControlClear;
1734 /* transmission DMA program:
1735 one OUTPUT_MORE_IMMEDIATE for the IT header
1736 one OUTPUT_LAST for the buffer data */
1738 struct iso_xmit_cmd {
1739 struct dma_cmd output_more_immediate;
1742 struct dma_cmd output_last;
1745 static int ohci_iso_xmit_init(struct hpsb_iso *iso);
1746 static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle);
1747 static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso);
1748 static void ohci_iso_xmit_task(unsigned long data);
1750 static int ohci_iso_xmit_init(struct hpsb_iso *iso)
1752 struct ohci_iso_xmit *xmit;
1753 unsigned int prog_size;
1757 xmit = kmalloc(sizeof(*xmit), GFP_KERNEL);
1761 iso->hostdata = xmit;
1762 xmit->ohci = iso->host->hostdata;
1763 xmit->task_active = 0;
1764 xmit->last_cycle = -1;
1765 atomic_set(&iso->skips, 0);
1767 dma_prog_region_init(&xmit->prog);
1769 prog_size = sizeof(struct iso_xmit_cmd) * iso->buf_packets;
1771 if (dma_prog_region_alloc(&xmit->prog, prog_size, xmit->ohci->dev))
1774 ohci1394_init_iso_tasklet(&xmit->task, OHCI_ISO_TRANSMIT,
1775 ohci_iso_xmit_task, (unsigned long) iso);
1777 if (ohci1394_register_iso_tasklet(xmit->ohci, &xmit->task) < 0) {
1782 xmit->task_active = 1;
1784 /* xmit context registers are spaced 16 bytes apart */
1785 ctx = xmit->task.context;
1786 xmit->ContextControlSet = OHCI1394_IsoXmitContextControlSet + 16 * ctx;
1787 xmit->ContextControlClear = OHCI1394_IsoXmitContextControlClear + 16 * ctx;
1788 xmit->CommandPtr = OHCI1394_IsoXmitCommandPtr + 16 * ctx;
1793 ohci_iso_xmit_shutdown(iso);
1797 static void ohci_iso_xmit_stop(struct hpsb_iso *iso)
1799 struct ohci_iso_xmit *xmit = iso->hostdata;
1800 struct ti_ohci *ohci = xmit->ohci;
1802 /* disable interrupts */
1803 reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskClear, 1 << xmit->task.context);
1806 if (ohci1394_stop_context(xmit->ohci, xmit->ContextControlClear, NULL)) {
1807 /* XXX the DMA context will lock up if you try to send too much data! */
1809 "you probably exceeded the OHCI card's bandwidth limit - "
1810 "reload the module and reduce xmit bandwidth");
1814 static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso)
1816 struct ohci_iso_xmit *xmit = iso->hostdata;
1818 if (xmit->task_active) {
1819 ohci_iso_xmit_stop(iso);
1820 ohci1394_unregister_iso_tasklet(xmit->ohci, &xmit->task);
1821 xmit->task_active = 0;
1824 dma_prog_region_free(&xmit->prog);
1826 iso->hostdata = NULL;
1829 static void ohci_iso_xmit_task(unsigned long data)
1831 struct hpsb_iso *iso = (struct hpsb_iso*) data;
1832 struct ohci_iso_xmit *xmit = iso->hostdata;
1833 struct ti_ohci *ohci = xmit->ohci;
1837 /* check the whole buffer if necessary, starting at pkt_dma */
1838 for (count = 0; count < iso->buf_packets; count++) {
1841 /* DMA descriptor */
1842 struct iso_xmit_cmd *cmd = dma_region_i(&xmit->prog, struct iso_xmit_cmd, iso->pkt_dma);
1844 /* check for new writes to xferStatus */
1845 u16 xferstatus = le32_to_cpu(cmd->output_last.status) >> 16;
1846 u8 event = xferstatus & 0x1F;
1849 /* packet hasn't been sent yet; we are done for now */
1855 "IT DMA error - OHCI error code 0x%02x\n", event);
1857 /* at least one packet went out, so wake up the writer */
1861 cycle = le32_to_cpu(cmd->output_last.status) & 0x1FFF;
1863 if (xmit->last_cycle > -1) {
1864 int cycle_diff = cycle - xmit->last_cycle;
1868 if (cycle_diff < 0) {
1871 PRINT(KERN_ERR, "bogus cycle diff %d\n",
1875 skip = cycle_diff - 1;
1877 DBGMSG("skipped %d cycles without packet loss", skip);
1878 atomic_add(skip, &iso->skips);
1881 xmit->last_cycle = cycle;
1883 /* tell the subsystem the packet has gone out */
1884 hpsb_iso_packet_sent(iso, cycle, event != 0x11);
1886 /* reset the DMA descriptor for next time */
1887 cmd->output_last.status = 0;
1894 static int ohci_iso_xmit_queue(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info)
1896 struct ohci_iso_xmit *xmit = iso->hostdata;
1897 struct ti_ohci *ohci = xmit->ohci;
1900 struct iso_xmit_cmd *next, *prev;
1902 unsigned int offset;
1904 unsigned char tag, sy;
1906 /* check that the packet doesn't cross a page boundary
1907 (we could allow this if we added OUTPUT_MORE descriptor support) */
1908 if (cross_bound(info->offset, info->len)) {
1910 "rawiso xmit: packet %u crosses a page boundary",
1915 offset = info->offset;
1920 /* sync up the card's view of the buffer */
1921 dma_region_sync_for_device(&iso->data_buf, offset, len);
1923 /* append first_packet to the DMA chain */
1924 /* by linking the previous descriptor to it */
1925 /* (next will become the new end of the DMA chain) */
1927 next_i = iso->first_packet;
1928 prev_i = (next_i == 0) ? (iso->buf_packets - 1) : (next_i - 1);
1930 next = dma_region_i(&xmit->prog, struct iso_xmit_cmd, next_i);
1931 prev = dma_region_i(&xmit->prog, struct iso_xmit_cmd, prev_i);
1933 /* set up the OUTPUT_MORE_IMMEDIATE descriptor */
1934 memset(next, 0, sizeof(struct iso_xmit_cmd));
1935 next->output_more_immediate.control = cpu_to_le32(0x02000008);
1937 /* ISO packet header is embedded in the OUTPUT_MORE_IMMEDIATE */
1939 /* tcode = 0xA, and sy */
1940 next->iso_hdr[0] = 0xA0 | (sy & 0xF);
1942 /* tag and channel number */
1943 next->iso_hdr[1] = (tag << 6) | (iso->channel & 0x3F);
1945 /* transmission speed */
1946 next->iso_hdr[2] = iso->speed & 0x7;
1949 next->iso_hdr[6] = len & 0xFF;
1950 next->iso_hdr[7] = len >> 8;
1952 /* set up the OUTPUT_LAST */
1953 next->output_last.control = cpu_to_le32(1 << 28);
1954 next->output_last.control |= cpu_to_le32(1 << 27); /* update timeStamp */
1955 next->output_last.control |= cpu_to_le32(3 << 20); /* want interrupt */
1956 next->output_last.control |= cpu_to_le32(3 << 18); /* enable branch */
1957 next->output_last.control |= cpu_to_le32(len);
1959 /* payload bus address */
1960 next->output_last.address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, offset));
1962 /* leave branchAddress at zero for now */
1964 /* re-write the previous DMA descriptor to chain to this one */
1966 /* set prev branch address to point to next (Z=3) */
1967 prev->output_last.branchAddress = cpu_to_le32(
1968 dma_prog_region_offset_to_bus(&xmit->prog, sizeof(struct iso_xmit_cmd) * next_i) | 3);
1971 * Link the skip address to this descriptor itself. This causes a
1972 * context to skip a cycle whenever lost cycles or FIFO overruns occur,
1973 * without dropping the data at that point the application should then
1974 * decide whether this is an error condition or not. Some protocols
1975 * can deal with this by dropping some rate-matching padding packets.
1977 next->output_more_immediate.branchAddress =
1978 prev->output_last.branchAddress;
1980 /* disable interrupt, unless required by the IRQ interval */
1981 if (prev_i % iso->irq_interval) {
1982 prev->output_last.control &= cpu_to_le32(~(3 << 20)); /* no interrupt */
1984 prev->output_last.control |= cpu_to_le32(3 << 20); /* enable interrupt */
1989 /* wake DMA in case it is sleeping */
1990 reg_write(xmit->ohci, xmit->ContextControlSet, 1 << 12);
1992 /* issue a dummy read of the cycle timer to force all PCI
1993 writes to be posted immediately */
1995 reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer);
2000 static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle)
2002 struct ohci_iso_xmit *xmit = iso->hostdata;
2003 struct ti_ohci *ohci = xmit->ohci;
2005 /* clear out the control register */
2006 reg_write(xmit->ohci, xmit->ContextControlClear, 0xFFFFFFFF);
2009 /* address and length of first descriptor block (Z=3) */
2010 reg_write(xmit->ohci, xmit->CommandPtr,
2011 dma_prog_region_offset_to_bus(&xmit->prog, iso->pkt_dma * sizeof(struct iso_xmit_cmd)) | 3);
2015 u32 start = cycle & 0x1FFF;
2017 /* 'cycle' is only mod 8000, but we also need two 'seconds' bits -
2018 just snarf them from the current time */
2019 u32 seconds = reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer) >> 25;
2021 /* advance one second to give some extra time for DMA to start */
2024 start |= (seconds & 3) << 13;
2026 reg_write(xmit->ohci, xmit->ContextControlSet, 0x80000000 | (start << 16));
2029 /* enable interrupts */
2030 reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskSet, 1 << xmit->task.context);
2033 reg_write(xmit->ohci, xmit->ContextControlSet, 0x8000);
2036 /* wait 100 usec to give the card time to go active */
2039 /* check the RUN bit */
2040 if (!(reg_read(xmit->ohci, xmit->ContextControlSet) & 0x8000)) {
2041 PRINT(KERN_ERR, "Error starting IT DMA (ContextControl 0x%08x)\n",
2042 reg_read(xmit->ohci, xmit->ContextControlSet));
2049 static int ohci_isoctl(struct hpsb_iso *iso, enum isoctl_cmd cmd, unsigned long arg)
2054 return ohci_iso_xmit_init(iso);
2056 return ohci_iso_xmit_start(iso, arg);
2058 ohci_iso_xmit_stop(iso);
2061 return ohci_iso_xmit_queue(iso, (struct hpsb_iso_packet_info*) arg);
2063 ohci_iso_xmit_shutdown(iso);
2067 return ohci_iso_recv_init(iso);
2069 int *args = (int*) arg;
2070 return ohci_iso_recv_start(iso, args[0], args[1], args[2]);
2073 ohci_iso_recv_stop(iso);
2076 ohci_iso_recv_release(iso, (struct hpsb_iso_packet_info*) arg);
2079 ohci_iso_recv_task((unsigned long) iso);
2082 ohci_iso_recv_shutdown(iso);
2084 case RECV_LISTEN_CHANNEL:
2085 ohci_iso_recv_change_channel(iso, arg, 1);
2087 case RECV_UNLISTEN_CHANNEL:
2088 ohci_iso_recv_change_channel(iso, arg, 0);
2090 case RECV_SET_CHANNEL_MASK:
2091 ohci_iso_recv_set_channel_mask(iso, *((u64*) arg));
2095 PRINT_G(KERN_ERR, "ohci_isoctl cmd %d not implemented yet",
2102 /***************************************
2103 * IEEE-1394 functionality section END *
2104 ***************************************/
2107 /********************************************************
2108 * Global stuff (interrupt handler, init/shutdown code) *
2109 ********************************************************/
2111 static void dma_trm_reset(struct dma_trm_ctx *d)
2113 unsigned long flags;
2114 LIST_HEAD(packet_list);
2115 struct ti_ohci *ohci = d->ohci;
2116 struct hpsb_packet *packet, *ptmp;
2118 ohci1394_stop_context(ohci, d->ctrlClear, NULL);
2120 /* Lock the context, reset it and release it. Move the packets
2121 * that were pending in the context to packet_list and free
2122 * them after releasing the lock. */
2124 spin_lock_irqsave(&d->lock, flags);
2126 list_splice_init(&d->fifo_list, &packet_list);
2127 list_splice_init(&d->pending_list, &packet_list);
2129 d->branchAddrPtr = NULL;
2130 d->sent_ind = d->prg_ind;
2131 d->free_prgs = d->num_desc;
2133 spin_unlock_irqrestore(&d->lock, flags);
2135 if (list_empty(&packet_list))
2138 PRINT(KERN_INFO, "AT dma reset ctx=%d, aborting transmission", d->ctx);
2140 /* Now process subsystem callbacks for the packets from this
2142 list_for_each_entry_safe(packet, ptmp, &packet_list, driver_list) {
2143 list_del_init(&packet->driver_list);
2144 hpsb_packet_sent(ohci->host, packet, ACKX_ABORTED);
2148 static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci,
2152 struct ohci1394_iso_tasklet *t;
2154 unsigned long flags;
2156 spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
2158 list_for_each_entry(t, &ohci->iso_tasklet_list, link) {
2159 mask = 1 << t->context;
2161 if (t->type == OHCI_ISO_TRANSMIT) {
2162 if (tx_event & mask)
2163 tasklet_schedule(&t->tasklet);
2165 /* OHCI_ISO_RECEIVE or OHCI_ISO_MULTICHANNEL_RECEIVE */
2166 if (rx_event & mask)
2167 tasklet_schedule(&t->tasklet);
2171 spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
2174 static irqreturn_t ohci_irq_handler(int irq, void *dev_id)
2176 quadlet_t event, node_id;
2177 struct ti_ohci *ohci = (struct ti_ohci *)dev_id;
2178 struct hpsb_host *host = ohci->host;
2179 int phyid = -1, isroot = 0;
2180 unsigned long flags;
2182 /* Read and clear the interrupt event register. Don't clear
2183 * the busReset event, though. This is done when we get the
2184 * selfIDComplete interrupt. */
2185 spin_lock_irqsave(&ohci->event_lock, flags);
2186 event = reg_read(ohci, OHCI1394_IntEventClear);
2187 reg_write(ohci, OHCI1394_IntEventClear, event & ~OHCI1394_busReset);
2188 spin_unlock_irqrestore(&ohci->event_lock, flags);
2193 /* If event is ~(u32)0 cardbus card was ejected. In this case
2194 * we just return, and clean up in the ohci1394_pci_remove
2196 if (event == ~(u32) 0) {
2197 DBGMSG("Device removed.");
2201 DBGMSG("IntEvent: %08x", event);
2203 if (event & OHCI1394_unrecoverableError) {
2205 PRINT(KERN_ERR, "Unrecoverable error!");
2207 if (reg_read(ohci, OHCI1394_AsReqTrContextControlSet) & 0x800)
2208 PRINT(KERN_ERR, "Async Req Tx Context died: "
2209 "ctrl[%08x] cmdptr[%08x]",
2210 reg_read(ohci, OHCI1394_AsReqTrContextControlSet),
2211 reg_read(ohci, OHCI1394_AsReqTrCommandPtr));
2213 if (reg_read(ohci, OHCI1394_AsRspTrContextControlSet) & 0x800)
2214 PRINT(KERN_ERR, "Async Rsp Tx Context died: "
2215 "ctrl[%08x] cmdptr[%08x]",
2216 reg_read(ohci, OHCI1394_AsRspTrContextControlSet),
2217 reg_read(ohci, OHCI1394_AsRspTrCommandPtr));
2219 if (reg_read(ohci, OHCI1394_AsReqRcvContextControlSet) & 0x800)
2220 PRINT(KERN_ERR, "Async Req Rcv Context died: "
2221 "ctrl[%08x] cmdptr[%08x]",
2222 reg_read(ohci, OHCI1394_AsReqRcvContextControlSet),
2223 reg_read(ohci, OHCI1394_AsReqRcvCommandPtr));
2225 if (reg_read(ohci, OHCI1394_AsRspRcvContextControlSet) & 0x800)
2226 PRINT(KERN_ERR, "Async Rsp Rcv Context died: "
2227 "ctrl[%08x] cmdptr[%08x]",
2228 reg_read(ohci, OHCI1394_AsRspRcvContextControlSet),
2229 reg_read(ohci, OHCI1394_AsRspRcvCommandPtr));
2231 for (ctx = 0; ctx < ohci->nb_iso_xmit_ctx; ctx++) {
2232 if (reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)) & 0x800)
2233 PRINT(KERN_ERR, "Iso Xmit %d Context died: "
2234 "ctrl[%08x] cmdptr[%08x]", ctx,
2235 reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)),
2236 reg_read(ohci, OHCI1394_IsoXmitCommandPtr + (16 * ctx)));
2239 for (ctx = 0; ctx < ohci->nb_iso_rcv_ctx; ctx++) {
2240 if (reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)) & 0x800)
2241 PRINT(KERN_ERR, "Iso Recv %d Context died: "
2242 "ctrl[%08x] cmdptr[%08x] match[%08x]", ctx,
2243 reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)),
2244 reg_read(ohci, OHCI1394_IsoRcvCommandPtr + (32 * ctx)),
2245 reg_read(ohci, OHCI1394_IsoRcvContextMatch + (32 * ctx)));
2248 event &= ~OHCI1394_unrecoverableError;
2250 if (event & OHCI1394_postedWriteErr) {
2251 PRINT(KERN_ERR, "physical posted write error");
2252 /* no recovery strategy yet, had to involve protocol drivers */
2253 event &= ~OHCI1394_postedWriteErr;
2255 if (event & OHCI1394_cycleTooLong) {
2256 if(printk_ratelimit())
2257 PRINT(KERN_WARNING, "isochronous cycle too long");
2259 DBGMSG("OHCI1394_cycleTooLong");
2260 reg_write(ohci, OHCI1394_LinkControlSet,
2261 OHCI1394_LinkControl_CycleMaster);
2262 event &= ~OHCI1394_cycleTooLong;
2264 if (event & OHCI1394_cycleInconsistent) {
2265 /* We subscribe to the cycleInconsistent event only to
2266 * clear the corresponding event bit... otherwise,
2267 * isochronous cycleMatch DMA won't work. */
2268 DBGMSG("OHCI1394_cycleInconsistent");
2269 event &= ~OHCI1394_cycleInconsistent;
2271 if (event & OHCI1394_busReset) {
2272 /* The busReset event bit can't be cleared during the
2273 * selfID phase, so we disable busReset interrupts, to
2274 * avoid burying the cpu in interrupt requests. */
2275 spin_lock_irqsave(&ohci->event_lock, flags);
2276 reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset);
2278 if (ohci->check_busreset) {
2283 while (reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) {
2284 reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
2286 spin_unlock_irqrestore(&ohci->event_lock, flags);
2288 spin_lock_irqsave(&ohci->event_lock, flags);
2290 /* The loop counter check is to prevent the driver
2291 * from remaining in this state forever. For the
2292 * initial bus reset, the loop continues for ever
2293 * and the system hangs, until some device is plugged-in
2294 * or out manually into a port! The forced reset seems
2295 * to solve this problem. This mainly effects nForce2. */
2296 if (loop_count > 10000) {
2297 ohci_devctl(host, RESET_BUS, LONG_RESET);
2298 DBGMSG("Detected bus-reset loop. Forced a bus reset!");
2305 spin_unlock_irqrestore(&ohci->event_lock, flags);
2306 if (!host->in_bus_reset) {
2307 DBGMSG("irq_handler: Bus reset requested");
2309 /* Subsystem call */
2310 hpsb_bus_reset(ohci->host);
2312 event &= ~OHCI1394_busReset;
2314 if (event & OHCI1394_reqTxComplete) {
2315 struct dma_trm_ctx *d = &ohci->at_req_context;
2316 DBGMSG("Got reqTxComplete interrupt "
2317 "status=0x%08X", reg_read(ohci, d->ctrlSet));
2318 if (reg_read(ohci, d->ctrlSet) & 0x800)
2319 ohci1394_stop_context(ohci, d->ctrlClear,
2322 dma_trm_tasklet((unsigned long)d);
2323 //tasklet_schedule(&d->task);
2324 event &= ~OHCI1394_reqTxComplete;
2326 if (event & OHCI1394_respTxComplete) {
2327 struct dma_trm_ctx *d = &ohci->at_resp_context;
2328 DBGMSG("Got respTxComplete interrupt "
2329 "status=0x%08X", reg_read(ohci, d->ctrlSet));
2330 if (reg_read(ohci, d->ctrlSet) & 0x800)
2331 ohci1394_stop_context(ohci, d->ctrlClear,
2334 tasklet_schedule(&d->task);
2335 event &= ~OHCI1394_respTxComplete;
2337 if (event & OHCI1394_RQPkt) {
2338 struct dma_rcv_ctx *d = &ohci->ar_req_context;
2339 DBGMSG("Got RQPkt interrupt status=0x%08X",
2340 reg_read(ohci, d->ctrlSet));
2341 if (reg_read(ohci, d->ctrlSet) & 0x800)
2342 ohci1394_stop_context(ohci, d->ctrlClear, "RQPkt");
2344 tasklet_schedule(&d->task);
2345 event &= ~OHCI1394_RQPkt;
2347 if (event & OHCI1394_RSPkt) {
2348 struct dma_rcv_ctx *d = &ohci->ar_resp_context;
2349 DBGMSG("Got RSPkt interrupt status=0x%08X",
2350 reg_read(ohci, d->ctrlSet));
2351 if (reg_read(ohci, d->ctrlSet) & 0x800)
2352 ohci1394_stop_context(ohci, d->ctrlClear, "RSPkt");
2354 tasklet_schedule(&d->task);
2355 event &= ~OHCI1394_RSPkt;
2357 if (event & OHCI1394_isochRx) {
2360 rx_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet);
2361 reg_write(ohci, OHCI1394_IsoRecvIntEventClear, rx_event);
2362 ohci_schedule_iso_tasklets(ohci, rx_event, 0);
2363 event &= ~OHCI1394_isochRx;
2365 if (event & OHCI1394_isochTx) {
2368 tx_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet);
2369 reg_write(ohci, OHCI1394_IsoXmitIntEventClear, tx_event);
2370 ohci_schedule_iso_tasklets(ohci, 0, tx_event);
2371 event &= ~OHCI1394_isochTx;
2373 if (event & OHCI1394_selfIDComplete) {
2374 if (host->in_bus_reset) {
2375 node_id = reg_read(ohci, OHCI1394_NodeID);
2377 if (!(node_id & 0x80000000)) {
2379 "SelfID received, but NodeID invalid "
2380 "(probably new bus reset occurred): %08X",
2382 goto selfid_not_valid;
2385 phyid = node_id & 0x0000003f;
2386 isroot = (node_id & 0x40000000) != 0;
2388 DBGMSG("SelfID interrupt received "
2389 "(phyid %d, %s)", phyid,
2390 (isroot ? "root" : "not root"));
2392 handle_selfid(ohci, host, phyid, isroot);
2394 /* Clear the bus reset event and re-enable the
2395 * busReset interrupt. */
2396 spin_lock_irqsave(&ohci->event_lock, flags);
2397 reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
2398 reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
2399 spin_unlock_irqrestore(&ohci->event_lock, flags);
2401 /* Turn on phys dma reception.
2403 * TODO: Enable some sort of filtering management.
2406 reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
2408 reg_write(ohci, OHCI1394_PhyReqFilterLoSet,
2412 DBGMSG("PhyReqFilter=%08x%08x",
2413 reg_read(ohci, OHCI1394_PhyReqFilterHiSet),
2414 reg_read(ohci, OHCI1394_PhyReqFilterLoSet));
2416 hpsb_selfid_complete(host, phyid, isroot);
2419 "SelfID received outside of bus reset sequence");
2422 event &= ~OHCI1394_selfIDComplete;
2425 /* Make sure we handle everything, just in case we accidentally
2426 * enabled an interrupt that we didn't write a handler for. */
2428 PRINT(KERN_ERR, "Unhandled interrupt(s) 0x%08x",
2434 /* Put the buffer back into the dma context */
2435 static void insert_dma_buffer(struct dma_rcv_ctx *d, int idx)
2437 struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
2438 DBGMSG("Inserting dma buf ctx=%d idx=%d", d->ctx, idx);
2440 d->prg_cpu[idx]->status = cpu_to_le32(d->buf_size);
2441 d->prg_cpu[idx]->branchAddress &= le32_to_cpu(0xfffffff0);
2442 idx = (idx + d->num_desc - 1 ) % d->num_desc;
2443 d->prg_cpu[idx]->branchAddress |= le32_to_cpu(0x00000001);
2445 /* To avoid a race, ensure 1394 interface hardware sees the inserted
2446 * context program descriptors before it sees the wakeup bit set. */
2449 /* wake up the dma context if necessary */
2450 if (!(reg_read(ohci, d->ctrlSet) & 0x400)) {
2452 "Waking dma ctx=%d ... processing is probably too slow",
2456 /* do this always, to avoid race condition */
2457 reg_write(ohci, d->ctrlSet, 0x1000);
2460 #define cond_le32_to_cpu(data, noswap) \
2461 (noswap ? data : le32_to_cpu(data))
2463 static const int TCODE_SIZE[16] = {20, 0, 16, -1, 16, 20, 20, 0,
2464 -1, 0, -1, 0, -1, -1, 16, -1};
2467 * Determine the length of a packet in the buffer
2468 * Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca>
2470 static inline int packet_length(struct dma_rcv_ctx *d, int idx,
2471 quadlet_t *buf_ptr, int offset,
2472 unsigned char tcode, int noswap)
2476 if (d->type == DMA_CTX_ASYNC_REQ || d->type == DMA_CTX_ASYNC_RESP) {
2477 length = TCODE_SIZE[tcode];
2479 if (offset + 12 >= d->buf_size) {
2480 length = (cond_le32_to_cpu(d->buf_cpu[(idx + 1) % d->num_desc]
2481 [3 - ((d->buf_size - offset) >> 2)], noswap) >> 16);
2483 length = (cond_le32_to_cpu(buf_ptr[3], noswap) >> 16);
2487 } else if (d->type == DMA_CTX_ISO) {
2488 /* Assumption: buffer fill mode with header/trailer */
2489 length = (cond_le32_to_cpu(buf_ptr[0], noswap) >> 16) + 8;
2492 if (length > 0 && length % 4)
2493 length += 4 - (length % 4);
2498 /* Tasklet that processes dma receive buffers */
2499 static void dma_rcv_tasklet (unsigned long data)
2501 struct dma_rcv_ctx *d = (struct dma_rcv_ctx*)data;
2502 struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
2503 unsigned int split_left, idx, offset, rescount;
2504 unsigned char tcode;
2505 int length, bytes_left, ack;
2506 unsigned long flags;
2511 spin_lock_irqsave(&d->lock, flags);
2514 offset = d->buf_offset;
2515 buf_ptr = d->buf_cpu[idx] + offset/4;
2517 rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff;
2518 bytes_left = d->buf_size - rescount - offset;
2520 while (bytes_left > 0) {
2521 tcode = (cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming) >> 4) & 0xf;
2523 /* packet_length() will return < 4 for an error */
2524 length = packet_length(d, idx, buf_ptr, offset, tcode, ohci->no_swap_incoming);
2526 if (length < 4) { /* something is wrong */
2527 sprintf(msg,"Unexpected tcode 0x%x(0x%08x) in AR ctx=%d, length=%d",
2528 tcode, cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming),
2530 ohci1394_stop_context(ohci, d->ctrlClear, msg);
2531 spin_unlock_irqrestore(&d->lock, flags);
2535 /* The first case is where we have a packet that crosses
2536 * over more than one descriptor. The next case is where
2537 * it's all in the first descriptor. */
2538 if ((offset + length) > d->buf_size) {
2539 DBGMSG("Split packet rcv'd");
2540 if (length > d->split_buf_size) {
2541 ohci1394_stop_context(ohci, d->ctrlClear,
2542 "Split packet size exceeded");
2544 d->buf_offset = offset;
2545 spin_unlock_irqrestore(&d->lock, flags);
2549 if (le32_to_cpu(d->prg_cpu[(idx+1)%d->num_desc]->status)
2551 /* Other part of packet not written yet.
2552 * this should never happen I think
2553 * anyway we'll get it on the next call. */
2555 "Got only half a packet!");
2557 d->buf_offset = offset;
2558 spin_unlock_irqrestore(&d->lock, flags);
2562 split_left = length;
2563 split_ptr = (char *)d->spb;
2564 memcpy(split_ptr,buf_ptr,d->buf_size-offset);
2565 split_left -= d->buf_size-offset;
2566 split_ptr += d->buf_size-offset;
2567 insert_dma_buffer(d, idx);
2568 idx = (idx+1) % d->num_desc;
2569 buf_ptr = d->buf_cpu[idx];
2572 while (split_left >= d->buf_size) {
2573 memcpy(split_ptr,buf_ptr,d->buf_size);
2574 split_ptr += d->buf_size;
2575 split_left -= d->buf_size;
2576 insert_dma_buffer(d, idx);
2577 idx = (idx+1) % d->num_desc;
2578 buf_ptr = d->buf_cpu[idx];
2581 if (split_left > 0) {
2582 memcpy(split_ptr, buf_ptr, split_left);
2583 offset = split_left;
2584 buf_ptr += offset/4;
2587 DBGMSG("Single packet rcv'd");
2588 memcpy(d->spb, buf_ptr, length);
2590 buf_ptr += length/4;
2591 if (offset==d->buf_size) {
2592 insert_dma_buffer(d, idx);
2593 idx = (idx+1) % d->num_desc;
2594 buf_ptr = d->buf_cpu[idx];
2599 /* We get one phy packet to the async descriptor for each
2600 * bus reset. We always ignore it. */
2601 if (tcode != OHCI1394_TCODE_PHY) {
2602 if (!ohci->no_swap_incoming)
2603 header_le32_to_cpu(d->spb, tcode);
2604 DBGMSG("Packet received from node"
2605 " %d ack=0x%02X spd=%d tcode=0x%X"
2606 " length=%d ctx=%d tlabel=%d",
2607 (d->spb[1]>>16)&0x3f,
2608 (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f,
2609 (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3,
2610 tcode, length, d->ctx,
2611 (d->spb[0]>>10)&0x3f);
2613 ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f)
2616 hpsb_packet_received(ohci->host, d->spb,
2619 #ifdef OHCI1394_DEBUG
2621 PRINT (KERN_DEBUG, "Got phy packet ctx=%d ... discarded",
2625 rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff;
2627 bytes_left = d->buf_size - rescount - offset;
2632 d->buf_offset = offset;
2634 spin_unlock_irqrestore(&d->lock, flags);
2637 /* Bottom half that processes sent packets */
2638 static void dma_trm_tasklet (unsigned long data)
2640 struct dma_trm_ctx *d = (struct dma_trm_ctx*)data;
2641 struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci);
2642 struct hpsb_packet *packet, *ptmp;
2643 unsigned long flags;
2647 spin_lock_irqsave(&d->lock, flags);
2649 list_for_each_entry_safe(packet, ptmp, &d->fifo_list, driver_list) {
2650 datasize = packet->data_size;
2651 if (datasize && packet->type != hpsb_raw)
2652 status = le32_to_cpu(
2653 d->prg_cpu[d->sent_ind]->end.status) >> 16;
2655 status = le32_to_cpu(
2656 d->prg_cpu[d->sent_ind]->begin.status) >> 16;
2659 /* this packet hasn't been sent yet*/
2662 #ifdef OHCI1394_DEBUG
2664 if (((le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf) == 0xa)
2665 DBGMSG("Stream packet sent to channel %d tcode=0x%X "
2666 "ack=0x%X spd=%d dataLength=%d ctx=%d",
2667 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>8)&0x3f,
2668 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf,
2669 status&0x1f, (status>>5)&0x3,
2670 le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16,
2673 DBGMSG("Packet sent to node %d tcode=0x%X tLabel="
2674 "%d ack=0x%X spd=%d dataLength=%d ctx=%d",
2675 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16)&0x3f,
2676 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf,
2677 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>10)&0x3f,
2678 status&0x1f, (status>>5)&0x3,
2679 le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3])>>16,
2682 DBGMSG("Packet sent to node %d tcode=0x%X tLabel="
2683 "%d ack=0x%X spd=%d data=0x%08X ctx=%d",
2684 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])
2686 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])
2688 (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])
2690 status&0x1f, (status>>5)&0x3,
2691 le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3]),
2695 if (status & 0x10) {
2698 switch (status & 0x1f) {
2699 case EVT_NO_STATUS: /* that should never happen */
2700 case EVT_RESERVED_A: /* that should never happen */
2701 case EVT_LONG_PACKET: /* that should never happen */
2702 PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
2703 ack = ACKX_SEND_ERROR;
2705 case EVT_MISSING_ACK:
2709 ack = ACKX_SEND_ERROR;
2711 case EVT_OVERRUN: /* that should never happen */
2712 PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
2713 ack = ACKX_SEND_ERROR;
2715 case EVT_DESCRIPTOR_READ:
2717 case EVT_DATA_WRITE:
2718 ack = ACKX_SEND_ERROR;
2720 case EVT_BUS_RESET: /* that should never happen */
2721 PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
2722 ack = ACKX_SEND_ERROR;
2728 ack = ACKX_SEND_ERROR;
2730 case EVT_RESERVED_B: /* that should never happen */
2731 case EVT_RESERVED_C: /* that should never happen */
2732 PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f);
2733 ack = ACKX_SEND_ERROR;
2737 ack = ACKX_SEND_ERROR;
2740 PRINT(KERN_ERR, "Unhandled OHCI evt_* error 0x%x", status & 0x1f);
2741 ack = ACKX_SEND_ERROR;
2746 list_del_init(&packet->driver_list);
2747 hpsb_packet_sent(ohci->host, packet, ack);
2750 pci_unmap_single(ohci->dev,
2751 cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address),
2752 datasize, PCI_DMA_TODEVICE);
2754 d->sent_ind = (d->sent_ind+1)%d->num_desc;
2758 dma_trm_flush(ohci, d);
2760 spin_unlock_irqrestore(&d->lock, flags);
2763 static void free_dma_rcv_ctx(struct dma_rcv_ctx *d)
2766 struct ti_ohci *ohci = d->ohci;
2771 DBGMSG("Freeing dma_rcv_ctx %d", d->ctx);
2774 for (i=0; i<d->num_desc; i++)
2775 if (d->buf_cpu[i] && d->buf_bus[i])
2776 pci_free_consistent(
2777 ohci->dev, d->buf_size,
2778 d->buf_cpu[i], d->buf_bus[i]);
2783 for (i=0; i<d->num_desc; i++)
2784 if (d->prg_cpu[i] && d->prg_bus[i])
2785 pci_pool_free(d->prg_pool, d->prg_cpu[i],
2787 pci_pool_destroy(d->prg_pool);
2793 /* Mark this context as freed. */
2798 alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
2799 enum context_type type, int ctx, int num_desc,
2800 int buf_size, int split_buf_size, int context_base)
2803 static int num_allocs;
2804 static char pool_name[20];
2810 d->num_desc = num_desc;
2811 d->buf_size = buf_size;
2812 d->split_buf_size = split_buf_size;
2818 d->buf_cpu = kzalloc(d->num_desc * sizeof(*d->buf_cpu), GFP_ATOMIC);
2819 d->buf_bus = kzalloc(d->num_desc * sizeof(*d->buf_bus), GFP_ATOMIC);
2821 if (d->buf_cpu == NULL || d->buf_bus == NULL) {
2822 PRINT(KERN_ERR, "Failed to allocate %s", "DMA buffer");
2823 free_dma_rcv_ctx(d);
2827 d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_ATOMIC);
2828 d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_ATOMIC);
2830 if (d->prg_cpu == NULL || d->prg_bus == NULL) {
2831 PRINT(KERN_ERR, "Failed to allocate %s", "DMA prg");
2832 free_dma_rcv_ctx(d);
2836 d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC);
2838 if (d->spb == NULL) {
2839 PRINT(KERN_ERR, "Failed to allocate %s", "split buffer");
2840 free_dma_rcv_ctx(d);
2844 len = sprintf(pool_name, "ohci1394_rcv_prg");
2845 sprintf(pool_name+len, "%d", num_allocs);
2846 d->prg_pool = pci_pool_create(pool_name, ohci->dev,
2847 sizeof(struct dma_cmd), 4, 0);
2848 if(d->prg_pool == NULL)
2850 PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name);
2851 free_dma_rcv_ctx(d);
2856 for (i=0; i<d->num_desc; i++) {
2857 d->buf_cpu[i] = pci_alloc_consistent(ohci->dev,
2861 if (d->buf_cpu[i] != NULL) {
2862 memset(d->buf_cpu[i], 0, d->buf_size);
2865 "Failed to allocate %s", "DMA buffer");
2866 free_dma_rcv_ctx(d);
2870 d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
2872 if (d->prg_cpu[i] != NULL) {
2873 memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd));
2876 "Failed to allocate %s", "DMA prg");
2877 free_dma_rcv_ctx(d);
2882 spin_lock_init(&d->lock);
2884 d->ctrlSet = context_base + OHCI1394_ContextControlSet;
2885 d->ctrlClear = context_base + OHCI1394_ContextControlClear;
2886 d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
2888 tasklet_init(&d->task, dma_rcv_tasklet, (unsigned long) d);
2892 static void free_dma_trm_ctx(struct dma_trm_ctx *d)
2895 struct ti_ohci *ohci = d->ohci;
2900 DBGMSG("Freeing dma_trm_ctx %d", d->ctx);
2903 for (i=0; i<d->num_desc; i++)
2904 if (d->prg_cpu[i] && d->prg_bus[i])
2905 pci_pool_free(d->prg_pool, d->prg_cpu[i],
2907 pci_pool_destroy(d->prg_pool);
2912 /* Mark this context as freed. */
2917 alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
2918 enum context_type type, int ctx, int num_desc,
2922 static char pool_name[20];
2923 static int num_allocs=0;
2928 d->num_desc = num_desc;
2933 d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_KERNEL);
2934 d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_KERNEL);
2936 if (d->prg_cpu == NULL || d->prg_bus == NULL) {
2937 PRINT(KERN_ERR, "Failed to allocate %s", "AT DMA prg");
2938 free_dma_trm_ctx(d);
2942 len = sprintf(pool_name, "ohci1394_trm_prg");
2943 sprintf(pool_name+len, "%d", num_allocs);
2944 d->prg_pool = pci_pool_create(pool_name, ohci->dev,
2945 sizeof(struct at_dma_prg), 4, 0);
2946 if (d->prg_pool == NULL) {
2947 PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name);
2948 free_dma_trm_ctx(d);
2953 for (i = 0; i < d->num_desc; i++) {
2954 d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
2956 if (d->prg_cpu[i] != NULL) {
2957 memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg));
2960 "Failed to allocate %s", "AT DMA prg");
2961 free_dma_trm_ctx(d);
2966 spin_lock_init(&d->lock);
2968 /* initialize tasklet */
2969 d->ctrlSet = context_base + OHCI1394_ContextControlSet;
2970 d->ctrlClear = context_base + OHCI1394_ContextControlClear;
2971 d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
2972 tasklet_init(&d->task, dma_trm_tasklet, (unsigned long)d);
2976 static void ohci_set_hw_config_rom(struct hpsb_host *host, quadlet_t *config_rom)
2978 struct ti_ohci *ohci = host->hostdata;
2980 reg_write(ohci, OHCI1394_ConfigROMhdr, be32_to_cpu(config_rom[0]));
2981 reg_write(ohci, OHCI1394_BusOptions, be32_to_cpu(config_rom[2]));
2983 memcpy(ohci->csr_config_rom_cpu, config_rom, OHCI_CONFIG_ROM_LEN);
2987 static quadlet_t ohci_hw_csr_reg(struct hpsb_host *host, int reg,
2988 quadlet_t data, quadlet_t compare)
2990 struct ti_ohci *ohci = host->hostdata;
2993 reg_write(ohci, OHCI1394_CSRData, data);
2994 reg_write(ohci, OHCI1394_CSRCompareData, compare);
2995 reg_write(ohci, OHCI1394_CSRControl, reg & 0x3);
2997 for (i = 0; i < OHCI_LOOP_COUNT; i++) {
2998 if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000)
3004 return reg_read(ohci, OHCI1394_CSRData);
3007 static struct hpsb_host_driver ohci1394_driver = {
3008 .owner = THIS_MODULE,
3009 .name = OHCI1394_DRIVER_NAME,
3010 .set_hw_config_rom = ohci_set_hw_config_rom,
3011 .transmit_packet = ohci_transmit,
3012 .devctl = ohci_devctl,
3013 .isoctl = ohci_isoctl,
3014 .hw_csr_reg = ohci_hw_csr_reg,
3017 /***********************************
3018 * PCI Driver Interface functions *
3019 ***********************************/
3021 #ifdef CONFIG_PPC_PMAC
3022 static void ohci1394_pmac_on(struct pci_dev *dev)
3024 if (machine_is(powermac)) {
3025 struct device_node *ofn = pci_device_to_OF_node(dev);
3028 pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
3029 pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
3034 static void ohci1394_pmac_off(struct pci_dev *dev)
3036 if (machine_is(powermac)) {
3037 struct device_node *ofn = pci_device_to_OF_node(dev);
3040 pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
3041 pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
3046 #define ohci1394_pmac_on(dev)
3047 #define ohci1394_pmac_off(dev)
3048 #endif /* CONFIG_PPC_PMAC */
3050 static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
3051 const struct pci_device_id *ent)
3053 struct hpsb_host *host;
3054 struct ti_ohci *ohci; /* shortcut to currently handled device */
3055 resource_size_t ohci_base;
3058 ohci1394_pmac_on(dev);
3059 if (pci_enable_device(dev)) {
3060 PRINT_G(KERN_ERR, "Failed to enable OHCI hardware");
3064 pci_set_master(dev);
3066 host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev);
3068 PRINT_G(KERN_ERR, "Failed to allocate %s", "host structure");
3071 ohci = host->hostdata;
3074 ohci->init_state = OHCI_INIT_ALLOC_HOST;
3076 pci_set_drvdata(dev, ohci);
3078 /* We don't want hardware swapping */
3079 pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
3081 /* Some oddball Apple controllers do not order the selfid
3082 * properly, so we make up for it here. */
3083 #ifndef __LITTLE_ENDIAN
3084 /* XXX: Need a better way to check this. I'm wondering if we can
3085 * read the values of the OHCI1394_PCI_HCI_Control and the
3086 * noByteSwapData registers to see if they were not cleared to
3087 * zero. Should this work? Obviously it's not defined what these
3088 * registers will read when they aren't supported. Bleh! */
3089 if (dev->vendor == PCI_VENDOR_ID_APPLE &&
3090 dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) {
3091 ohci->no_swap_incoming = 1;
3092 ohci->selfid_swap = 0;
3094 ohci->selfid_swap = 1;
3098 #ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_FW
3099 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_FW 0x006e
3102 /* These chipsets require a bit of extra care when checking after
3104 if ((dev->vendor == PCI_VENDOR_ID_APPLE &&
3105 dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) ||
3106 (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
3107 dev->device == PCI_DEVICE_ID_NVIDIA_NFORCE2_FW))
3108 ohci->check_busreset = 1;
3110 /* We hardwire the MMIO length, since some CardBus adaptors
3111 * fail to report the right length. Anyway, the ohci spec
3112 * clearly says it's 2kb, so this shouldn't be a problem. */
3113 ohci_base = pci_resource_start(dev, 0);
3114 if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
3115 PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!",
3116 (unsigned long long)pci_resource_len(dev, 0));
3118 if (!request_mem_region(ohci_base, OHCI1394_REGISTER_SIZE,
3119 OHCI1394_DRIVER_NAME)) {
3120 PRINT_G(KERN_ERR, "MMIO resource (0x%llx - 0x%llx) unavailable",
3121 (unsigned long long)ohci_base,
3122 (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE);
3125 ohci->init_state = OHCI_INIT_HAVE_MEM_REGION;
3127 ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE);
3128 if (ohci->registers == NULL) {
3129 PRINT_G(KERN_ERR, "Failed to remap registers");
3133 ohci->init_state = OHCI_INIT_HAVE_IOMAPPING;
3134 DBGMSG("Remapped memory spaces reg 0x%p", ohci->registers);
3136 /* csr_config rom allocation */
3137 ohci->csr_config_rom_cpu =
3138 pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN,
3139 &ohci->csr_config_rom_bus);
3140 if (ohci->csr_config_rom_cpu == NULL) {
3141 PRINT_G(KERN_ERR, "Failed to allocate %s", "buffer config rom");
3144 ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER;
3146 /* self-id dma buffer allocation */
3147 ohci->selfid_buf_cpu =
3148 pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
3149 &ohci->selfid_buf_bus);
3150 if (ohci->selfid_buf_cpu == NULL) {
3151 PRINT_G(KERN_ERR, "Failed to allocate %s", "self-ID buffer");
3154 ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER;
3156 if ((unsigned long)ohci->selfid_buf_cpu & 0x1fff)
3157 PRINT(KERN_INFO, "SelfID buffer %p is not aligned on "
3158 "8Kb boundary... may cause problems on some CXD3222 chip",
3159 ohci->selfid_buf_cpu);
3161 /* No self-id errors at startup */
3162 ohci->self_id_errors = 0;
3164 ohci->init_state = OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE;
3165 /* AR DMA request context allocation */
3166 if (alloc_dma_rcv_ctx(ohci, &ohci->ar_req_context,
3167 DMA_CTX_ASYNC_REQ, 0, AR_REQ_NUM_DESC,
3168 AR_REQ_BUF_SIZE, AR_REQ_SPLIT_BUF_SIZE,
3169 OHCI1394_AsReqRcvContextBase) < 0) {
3170 PRINT_G(KERN_ERR, "Failed to allocate %s", "AR Req context");
3173 /* AR DMA response context allocation */
3174 if (alloc_dma_rcv_ctx(ohci, &ohci->ar_resp_context,
3175 DMA_CTX_ASYNC_RESP, 0, AR_RESP_NUM_DESC,
3176 AR_RESP_BUF_SIZE, AR_RESP_SPLIT_BUF_SIZE,
3177 OHCI1394_AsRspRcvContextBase) < 0) {
3178 PRINT_G(KERN_ERR, "Failed to allocate %s", "AR Resp context");
3181 /* AT DMA request context */
3182 if (alloc_dma_trm_ctx(ohci, &ohci->at_req_context,
3183 DMA_CTX_ASYNC_REQ, 0, AT_REQ_NUM_DESC,
3184 OHCI1394_AsReqTrContextBase) < 0) {
3185 PRINT_G(KERN_ERR, "Failed to allocate %s", "AT Req context");
3188 /* AT DMA response context */
3189 if (alloc_dma_trm_ctx(ohci, &ohci->at_resp_context,
3190 DMA_CTX_ASYNC_RESP, 1, AT_RESP_NUM_DESC,
3191 OHCI1394_AsRspTrContextBase) < 0) {
3192 PRINT_G(KERN_ERR, "Failed to allocate %s", "AT Resp context");
3195 /* Start off with a soft reset, to clear everything to a sane
3197 ohci_soft_reset(ohci);
3199 /* Now enable LPS, which we need in order to start accessing
3200 * most of the registers. In fact, on some cards (ALI M5251),
3201 * accessing registers in the SClk domain without LPS enabled
3202 * will lock up the machine. Wait 50msec to make sure we have
3203 * full link enabled. */
3204 reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
3206 /* Disable and clear interrupts */
3207 reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
3208 reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
3212 /* Determine the number of available IR and IT contexts. */
3213 ohci->nb_iso_rcv_ctx =
3214 get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet);
3215 ohci->nb_iso_xmit_ctx =
3216 get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet);
3218 /* Set the usage bits for non-existent contexts so they can't
3220 ohci->ir_ctx_usage = ~0 << ohci->nb_iso_rcv_ctx;
3221 ohci->it_ctx_usage = ~0 << ohci->nb_iso_xmit_ctx;
3223 INIT_LIST_HEAD(&ohci->iso_tasklet_list);
3224 spin_lock_init(&ohci->iso_tasklet_list_lock);
3225 ohci->ISO_channel_usage = 0;
3226 spin_lock_init(&ohci->IR_channel_lock);
3228 spin_lock_init(&ohci->event_lock);
3231 * interrupts are disabled, all right, but... due to IRQF_SHARED we
3232 * might get called anyway. We'll see no event, of course, but
3233 * we need to get to that "no event", so enough should be initialized
3236 if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED,
3237 OHCI1394_DRIVER_NAME, ohci)) {
3238 PRINT_G(KERN_ERR, "Failed to allocate interrupt %d", dev->irq);
3241 ohci->init_state = OHCI_INIT_HAVE_IRQ;
3242 ohci_initialize(ohci);
3244 /* Set certain csr values */
3245 host->csr.guid_hi = reg_read(ohci, OHCI1394_GUIDHi);
3246 host->csr.guid_lo = reg_read(ohci, OHCI1394_GUIDLo);
3247 host->csr.cyc_clk_acc = 100; /* how do we determine clk accuracy? */
3248 host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf;
3249 host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7;
3252 host->low_addr_space =
3253 (u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16;
3254 if (!host->low_addr_space)
3255 host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED;
3257 host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE;
3259 /* Tell the highlevel this host is ready */
3260 if (hpsb_add_host(host)) {
3261 PRINT_G(KERN_ERR, "Failed to register host with highlevel");
3264 ohci->init_state = OHCI_INIT_DONE;
3268 ohci1394_pci_remove(dev);
3272 static void ohci1394_pci_remove(struct pci_dev *dev)
3274 struct ti_ohci *ohci;
3275 struct device *device;
3277 ohci = pci_get_drvdata(dev);
3281 device = get_device(&ohci->host->device);
3283 switch (ohci->init_state) {
3284 case OHCI_INIT_DONE:
3285 hpsb_remove_host(ohci->host);
3287 /* Clear out BUS Options */
3288 reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
3289 reg_write(ohci, OHCI1394_BusOptions,
3290 (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
3292 memset(ohci->csr_config_rom_cpu, 0, OHCI_CONFIG_ROM_LEN);
3294 case OHCI_INIT_HAVE_IRQ:
3295 /* Clear interrupt registers */
3296 reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
3297 reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
3298 reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
3299 reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
3300 reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
3301 reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
3303 /* Disable IRM Contender */
3304 set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
3306 /* Clear link control register */
3307 reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
3309 /* Let all other nodes know to ignore us */
3310 ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
3312 /* Soft reset before we start - this disables
3313 * interrupts and clears linkEnable and LPS. */
3314 ohci_soft_reset(ohci);
3315 free_irq(dev->irq, ohci);
3317 case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE:
3318 /* The ohci_soft_reset() stops all DMA contexts, so we
3319 * dont need to do this. */
3320 free_dma_rcv_ctx(&ohci->ar_req_context);
3321 free_dma_rcv_ctx(&ohci->ar_resp_context);
3322 free_dma_trm_ctx(&ohci->at_req_context);
3323 free_dma_trm_ctx(&ohci->at_resp_context);
3325 case OHCI_INIT_HAVE_SELFID_BUFFER:
3326 pci_free_consistent(dev, OHCI1394_SI_DMA_BUF_SIZE,
3327 ohci->selfid_buf_cpu,
3328 ohci->selfid_buf_bus);
3330 case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER:
3331 pci_free_consistent(dev, OHCI_CONFIG_ROM_LEN,
3332 ohci->csr_config_rom_cpu,
3333 ohci->csr_config_rom_bus);
3335 case OHCI_INIT_HAVE_IOMAPPING:
3336 iounmap(ohci->registers);
3338 case OHCI_INIT_HAVE_MEM_REGION:
3339 release_mem_region(pci_resource_start(dev, 0),
3340 OHCI1394_REGISTER_SIZE);
3342 case OHCI_INIT_ALLOC_HOST:
3343 pci_set_drvdata(dev, NULL);
3349 ohci1394_pmac_off(dev);
3353 static int ohci1394_pci_suspend(struct pci_dev *dev, pm_message_t state)
3356 struct ti_ohci *ohci = pci_get_drvdata(dev);
3359 printk(KERN_ERR "%s: tried to suspend nonexisting host\n",
3360 OHCI1394_DRIVER_NAME);
3363 DBGMSG("suspend called");
3365 /* Clear the async DMA contexts and stop using the controller */
3366 hpsb_bus_reset(ohci->host);
3368 /* See ohci1394_pci_remove() for comments on this sequence */
3369 reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
3370 reg_write(ohci, OHCI1394_BusOptions,
3371 (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
3373 reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
3374 reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
3375 reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
3376 reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
3377 reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
3378 reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
3379 set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
3380 reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
3381 ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
3382 ohci_soft_reset(ohci);
3384 err = pci_save_state(dev);
3386 PRINT(KERN_ERR, "pci_save_state failed with %d", err);
3389 err = pci_set_power_state(dev, pci_choose_state(dev, state));
3391 DBGMSG("pci_set_power_state failed with %d", err);
3392 ohci1394_pmac_off(dev);
3397 static int ohci1394_pci_resume(struct pci_dev *dev)
3400 struct ti_ohci *ohci = pci_get_drvdata(dev);
3403 printk(KERN_ERR "%s: tried to resume nonexisting host\n",
3404 OHCI1394_DRIVER_NAME);
3407 DBGMSG("resume called");
3409 ohci1394_pmac_on(dev);
3410 pci_set_power_state(dev, PCI_D0);
3411 pci_restore_state(dev);
3412 err = pci_enable_device(dev);
3414 PRINT(KERN_ERR, "pci_enable_device failed with %d", err);
3418 /* See ohci1394_pci_probe() for comments on this sequence */
3419 ohci_soft_reset(ohci);
3420 reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
3421 reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
3422 reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
3424 ohci_initialize(ohci);
3426 hpsb_resume_host(ohci->host);
3429 #endif /* CONFIG_PM */
3431 static struct pci_device_id ohci1394_pci_tbl[] = {
3433 .class = PCI_CLASS_SERIAL_FIREWIRE_OHCI,
3434 .class_mask = PCI_ANY_ID,
3435 .vendor = PCI_ANY_ID,
3436 .device = PCI_ANY_ID,
3437 .subvendor = PCI_ANY_ID,
3438 .subdevice = PCI_ANY_ID,
3443 MODULE_DEVICE_TABLE(pci, ohci1394_pci_tbl);
3445 static struct pci_driver ohci1394_pci_driver = {
3446 .name = OHCI1394_DRIVER_NAME,
3447 .id_table = ohci1394_pci_tbl,
3448 .probe = ohci1394_pci_probe,
3449 .remove = ohci1394_pci_remove,
3451 .resume = ohci1394_pci_resume,
3452 .suspend = ohci1394_pci_suspend,
3456 /***********************************
3457 * OHCI1394 Video Interface *
3458 ***********************************/
3460 /* essentially the only purpose of this code is to allow another
3461 module to hook into ohci's interrupt handler */
3463 /* returns zero if successful, one if DMA context is locked up */
3464 int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg)
3468 /* stop the channel program if it's still running */
3469 reg_write(ohci, reg, 0x8000);
3471 /* Wait until it effectively stops */
3472 while (reg_read(ohci, reg) & 0x400) {
3476 "Runaway loop while stopping context: %s...", msg ? msg : "");
3483 if (msg) PRINT(KERN_ERR, "%s: dma prg stopped", msg);
3487 void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet, int type,
3488 void (*func)(unsigned long), unsigned long data)
3490 tasklet_init(&tasklet->tasklet, func, data);
3491 tasklet->type = type;
3492 /* We init the tasklet->link field, so we can list_del() it
3493 * without worrying whether it was added to the list or not. */
3494 INIT_LIST_HEAD(&tasklet->link);
3497 int ohci1394_register_iso_tasklet(struct ti_ohci *ohci,
3498 struct ohci1394_iso_tasklet *tasklet)
3500 unsigned long flags, *usage;
3501 int n, i, r = -EBUSY;
3503 if (tasklet->type == OHCI_ISO_TRANSMIT) {
3504 n = ohci->nb_iso_xmit_ctx;
3505 usage = &ohci->it_ctx_usage;
3508 n = ohci->nb_iso_rcv_ctx;
3509 usage = &ohci->ir_ctx_usage;
3511 /* only one receive context can be multichannel (OHCI sec 10.4.1) */
3512 if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) {
3513 if (test_and_set_bit(0, &ohci->ir_multichannel_used)) {
3519 spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
3521 for (i = 0; i < n; i++)
3522 if (!test_and_set_bit(i, usage)) {
3523 tasklet->context = i;
3524 list_add_tail(&tasklet->link, &ohci->iso_tasklet_list);
3529 spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
3534 void ohci1394_unregister_iso_tasklet(struct ti_ohci *ohci,
3535 struct ohci1394_iso_tasklet *tasklet)
3537 unsigned long flags;
3539 tasklet_kill(&tasklet->tasklet);
3541 spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
3543 if (tasklet->type == OHCI_ISO_TRANSMIT)
3544 clear_bit(tasklet->context, &ohci->it_ctx_usage);
3546 clear_bit(tasklet->context, &ohci->ir_ctx_usage);
3548 if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) {
3549 clear_bit(0, &ohci->ir_multichannel_used);
3553 list_del(&tasklet->link);
3555 spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
3558 EXPORT_SYMBOL(ohci1394_stop_context);
3559 EXPORT_SYMBOL(ohci1394_init_iso_tasklet);
3560 EXPORT_SYMBOL(ohci1394_register_iso_tasklet);
3561 EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet);
3563 /***********************************
3564 * General module initialization *
3565 ***********************************/
3567 MODULE_AUTHOR("Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>");
3568 MODULE_DESCRIPTION("Driver for PCI OHCI IEEE-1394 controllers");
3569 MODULE_LICENSE("GPL");
3571 static void __exit ohci1394_cleanup (void)
3573 pci_unregister_driver(&ohci1394_pci_driver);
3576 static int __init ohci1394_init(void)
3578 return pci_register_driver(&ohci1394_pci_driver);
3581 module_init(ohci1394_init);
3582 module_exit(ohci1394_cleanup);