2 # I2C Sensor device configuration
5 menu "Hardware Sensors Chip support"
12 config SENSORS_ADM1021
13 tristate "Analog Devices ADM1021 and compatibles"
14 depends on I2C && EXPERIMENTAL
17 If you say yes here you get support for Analog Devices ADM1021
18 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
19 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
20 and the XEON processor built-in sensor.
22 This driver can also be built as a module. If so, the module
23 will be called adm1021.
25 config SENSORS_ADM1025
26 tristate "Analog Devices ADM1025 and compatibles"
27 depends on I2C && EXPERIMENTAL
30 If you say yes here you get support for Analog Devices ADM1025
31 and Philips NE1619 sensor chips.
32 This driver can also be built as a module. If so, the module
33 will be called adm1025.
35 config SENSORS_ADM1026
36 tristate "Analog Devices ADM1026 and compatibles"
37 depends on I2C && EXPERIMENTAL
40 If you say yes here you get support for Analog Devices ADM1026
41 This driver can also be built as a module. If so, the module
42 will be called adm1026.
44 config SENSORS_ADM1031
45 tristate "Analog Devices ADM1031 and compatibles"
46 depends on I2C && EXPERIMENTAL
49 If you say yes here you get support for Analog Devices ADM1031
50 and ADM1030 sensor chips.
51 This driver can also be built as a module. If so, the module
52 will be called adm1031.
55 tristate "Asus ASB100 Bach"
56 depends on I2C && EXPERIMENTAL
59 If you say yes here you get support for the ASB100 Bach sensor
60 chip found on some Asus mainboards.
62 This driver can also be built as a module. If so, the module
63 will be called asb100.
66 tristate "Attansic ATXP1 VID controller"
67 depends on I2C && EXPERIMENTAL
69 If you say yes here you get support for the Attansic ATXP1 VID
72 If your board have such a chip, you are able to control your CPU
73 core and other voltages.
75 This driver can also be built as a module. If so, the module
79 tristate "Dallas Semiconductor DS1621 and DS1625"
80 depends on I2C && EXPERIMENTAL
83 If you say yes here you get support for Dallas Semiconductor
84 DS1621 and DS1625 sensor chips.
86 This driver can also be built as a module. If so, the module
87 will be called ds1621.
91 depends on I2C && EXPERIMENTAL
94 If you say yes here you get support for Fujitsu Siemens
95 Computers Hermes sensor chips.
97 This driver can also be built as a module. If so, the module
98 will be called fscher.
100 config SENSORS_FSCPOS
101 tristate "FSC Poseidon"
102 depends on I2C && EXPERIMENTAL
105 If you say yes here you get support for Fujitsu Siemens
106 Computers Poseidon sensor chips.
108 This driver can also be built as a module. If so, the module
109 will be called fscpos.
111 config SENSORS_GL518SM
112 tristate "Genesys Logic GL518SM"
113 depends on I2C && EXPERIMENTAL
116 If you say yes here you get support for Genesys Logic GL518SM
119 This driver can also be built as a module. If so, the module
120 will be called gl518sm.
122 config SENSORS_GL520SM
123 tristate "Genesys Logic GL520SM"
124 depends on I2C && EXPERIMENTAL
127 If you say yes here you get support for Genesys Logic GL520SM
130 This driver can also be built as a module. If so, the module
131 will be called gl520sm.
134 tristate "ITE IT87xx and compatibles"
135 depends on I2C && EXPERIMENTAL
138 If you say yes here you get support for ITE IT87xx sensor chips
141 This driver can also be built as a module. If so, the module
145 tristate "National Semiconductor LM63"
146 depends on I2C && EXPERIMENTAL
149 If you say yes here you get support for the National Semiconductor
150 LM63 remote diode digital temperature sensor with integrated fan
151 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
152 motherboard, among others.
154 This driver can also be built as a module. If so, the module
158 tristate "National Semiconductor LM75 and compatibles"
159 depends on I2C && EXPERIMENTAL
162 If you say yes here you get support for National Semiconductor LM75
163 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
164 9-bit precision mode), and TelCom (now Microchip) TCN75.
166 The DS75 and DS1775 in 10- to 12-bit precision modes will require
167 a force module parameter. The driver will not handle the extra
170 This driver can also be built as a module. If so, the module
174 tristate "National Semiconductor LM77"
175 depends on I2C && EXPERIMENTAL
178 If you say yes here you get support for National Semiconductor LM77
181 This driver can also be built as a module. If so, the module
185 tristate "National Semiconductor LM78 and compatibles"
186 depends on I2C && EXPERIMENTAL
189 If you say yes here you get support for National Semiconductor LM78,
190 LM78-J and LM79. This can also be built as a module which can be
191 inserted and removed while the kernel is running.
193 This driver can also be built as a module. If so, the module
197 tristate "National Semiconductor LM80"
198 depends on I2C && EXPERIMENTAL
201 If you say yes here you get support for National Semiconductor
204 This driver can also be built as a module. If so, the module
208 tristate "National Semiconductor LM83"
212 If you say yes here you get support for National Semiconductor
215 This driver can also be built as a module. If so, the module
219 tristate "National Semiconductor LM85 and compatibles"
220 depends on I2C && EXPERIMENTAL
223 If you say yes here you get support for National Semiconductor LM85
224 sensor chips and clones: ADT7463 and ADM1027.
226 This driver can also be built as a module. If so, the module
230 tristate "National Semiconductor LM87"
231 depends on I2C && EXPERIMENTAL
234 If you say yes here you get support for National Semiconductor LM87
237 This driver can also be built as a module. If so, the module
241 tristate "National Semiconductor LM90 and compatibles"
245 If you say yes here you get support for National Semiconductor LM90,
246 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
247 MAX6658 sensor chips.
249 The Analog Devices ADT7461 sensor chip is also supported, but only
250 if found in ADM1032 compatibility mode.
252 This driver can also be built as a module. If so, the module
256 tristate "National Semiconductor LM92 and compatibles"
257 depends on I2C && EXPERIMENTAL
260 If you say yes here you get support for National Semiconductor LM92
261 and Maxim MAX6635 sensor chips.
263 This driver can also be built as a module. If so, the module
266 config SENSORS_MAX1619
267 tristate "Maxim MAX1619 sensor chip"
268 depends on I2C && EXPERIMENTAL
271 If you say yes here you get support for MAX1619 sensor chip.
273 This driver can also be built as a module. If so, the module
274 will be called max1619.
276 config SENSORS_PC87360
277 tristate "National Semiconductor PC87360 family"
278 depends on I2C && EXPERIMENTAL
282 If you say yes here you get access to the hardware monitoring
283 functions of the National Semiconductor PC8736x Super-I/O chips.
284 The PC87360, PC87363 and PC87364 only have fan monitoring and
285 control. The PC87365 and PC87366 additionally have voltage and
286 temperature monitoring.
288 This driver can also be built as a module. If so, the module
289 will be called pc87360.
291 config SENSORS_SMSC47B397
292 tristate "SMSC LPC47B397-NC"
293 depends on I2C && EXPERIMENTAL
297 If you say yes here you get support for the SMSC LPC47B397-NC
300 This driver can also be built as a module. If so, the module
301 will be called smsc47b397.
303 config SENSORS_SIS5595
304 tristate "Silicon Integrated Systems Corp. SiS5595"
305 depends on I2C && PCI && EXPERIMENTAL
309 If you say yes here you get support for the integrated sensors in
310 SiS5595 South Bridges.
312 This driver can also be built as a module. If so, the module
313 will be called sis5595.
315 config SENSORS_SMSC47M1
316 tristate "SMSC LPC47M10x and compatibles"
317 depends on I2C && EXPERIMENTAL
321 If you say yes here you get support for the integrated fan
322 monitoring and control capabilities of the SMSC LPC47B27x,
323 LPC47M10x, LPC47M13x and LPC47M14x chips.
325 This driver can also be built as a module. If so, the module
326 will be called smsc47m1.
328 config SENSORS_VIA686A
330 depends on I2C && PCI && EXPERIMENTAL
334 If you say yes here you get support for the integrated sensors in
335 Via 686A/B South Bridges.
337 This driver can also be built as a module. If so, the module
338 will be called via686a.
340 config SENSORS_W83781D
341 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
342 depends on I2C && EXPERIMENTAL
345 If you say yes here you get support for the Winbond W8378x series
346 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
347 and the similar Asus AS99127F.
349 This driver can also be built as a module. If so, the module
350 will be called w83781d.
352 config SENSORS_W83L785TS
353 tristate "Winbond W83L785TS-S"
354 depends on I2C && EXPERIMENTAL
357 If you say yes here you get support for the Winbond W83L785TS-S
358 sensor chip, which is used on the Asus A7N8X, among other
361 This driver can also be built as a module. If so, the module
362 will be called w83l785ts.
364 config SENSORS_W83627HF
365 tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
366 depends on I2C && EXPERIMENTAL
370 If you say yes here you get support for the Winbond W836X7 series
371 of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
373 This driver can also be built as a module. If so, the module
374 will be called w83627hf.
378 menu "Other I2C Chip support"
381 config SENSORS_DS1337
382 tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
383 depends on I2C && EXPERIMENTAL
386 If you say yes here you get support for Dallas Semiconductor
387 DS1337 and DS1339 real-time clock chips.
389 This driver can also be built as a module. If so, the module
390 will be called ds1337.
392 config SENSORS_EEPROM
393 tristate "EEPROM reader"
394 depends on I2C && EXPERIMENTAL
397 If you say yes here you get read-only access to the EEPROM data
398 available on modern memory DIMMs and Sony Vaio laptops. Such
399 EEPROMs could theoretically be available on other devices as well.
401 This driver can also be built as a module. If so, the module
402 will be called eeprom.
404 config SENSORS_PCF8574
405 tristate "Philips PCF8574 and PCF8574A"
406 depends on I2C && EXPERIMENTAL
409 If you say yes here you get support for Philips PCF8574 and
412 This driver can also be built as a module. If so, the module
413 will be called pcf8574.
415 config SENSORS_PCF8591
416 tristate "Philips PCF8591"
417 depends on I2C && EXPERIMENTAL
420 If you say yes here you get support for Philips PCF8591 chips.
422 This driver can also be built as a module. If so, the module
423 will be called pcf8591.
425 config SENSORS_RTC8564
426 tristate "Epson 8564 RTC chip"
427 depends on I2C && EXPERIMENTAL
430 If you say yes here you get support for the Epson 8564 RTC chip.
432 This driver can also be built as a module. If so, the module
433 will be called i2c-rtc8564.
436 tristate "Philips ISP1301 with OMAP OTG"
437 depends on I2C && ARCH_OMAP_OTG
439 If you say yes here you get support for the Philips ISP1301
440 USB-On-The-Go transceiver working with the OMAP OTG controller.
441 The ISP1301 is used in products including H2 and H3 development
442 boards for Texas Instruments OMAP processors.
444 This driver can also be built as a module. If so, the module
445 will be called isp1301_omap.
447 config SENSORS_M41T00
448 tristate "ST M41T00 RTC chip"
449 depends on I2C && PPC32
451 If you say yes here you get support for the ST M41T00 RTC chip.
453 This driver can also be built as a module. If so, the module
454 will be called m41t00.