2 * adm9240.c Part of lm_sensors, Linux kernel modules for hardware
5 * Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl>
6 * Philip Edelbrock <phil@netroedge.com>
7 * Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl>
8 * Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable
9 * guidance from Jean Delvare
11 * Driver supports Analog Devices ADM9240
12 * Dallas Semiconductor DS1780
13 * National Semiconductor LM81
15 * ADM9240 is the reference, DS1780 and LM81 are register compatibles
17 * Voltage Six inputs are scaled by chip, VID also reported
18 * Temperature Chip temperature to 0.5'C, maximum and max_hysteris
19 * Fans 2 fans, low speed alarm, automatic fan clock divider
20 * Alarms 16-bit map of active alarms
21 * Analog Out 0..1250 mV output
23 * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
25 * Test hardware: Intel SE440BX-2 desktop motherboard --Grant
27 * LM81 extended temp reading not implemented
29 * This program is free software; you can redistribute it and/or modify
30 * it under the terms of the GNU General Public License as published by
31 * the Free Software Foundation; either version 2 of the License, or
32 * (at your option) any later version.
34 * This program is distributed in the hope that it will be useful,
35 * but WITHOUT ANY WARRANTY; without even the implied warranty of
36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
37 * GNU General Public License for more details.
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
44 #include <linux/init.h>
45 #include <linux/module.h>
46 #include <linux/slab.h>
47 #include <linux/i2c.h>
48 #include <linux/i2c-sensor.h>
49 #include <linux/i2c-vid.h>
50 #include <linux/hwmon.h>
51 #include <linux/err.h>
53 /* Addresses to scan */
54 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
57 /* Insmod parameters */
58 SENSORS_INSMOD_3(adm9240, ds1780, lm81);
60 /* ADM9240 registers */
61 #define ADM9240_REG_MAN_ID 0x3e
62 #define ADM9240_REG_DIE_REV 0x3f
63 #define ADM9240_REG_CONFIG 0x40
65 #define ADM9240_REG_IN(nr) (0x20 + (nr)) /* 0..5 */
66 #define ADM9240_REG_IN_MAX(nr) (0x2b + (nr) * 2)
67 #define ADM9240_REG_IN_MIN(nr) (0x2c + (nr) * 2)
68 #define ADM9240_REG_FAN(nr) (0x28 + (nr)) /* 0..1 */
69 #define ADM9240_REG_FAN_MIN(nr) (0x3b + (nr))
70 #define ADM9240_REG_INT(nr) (0x41 + (nr))
71 #define ADM9240_REG_INT_MASK(nr) (0x43 + (nr))
72 #define ADM9240_REG_TEMP 0x27
73 #define ADM9240_REG_TEMP_HIGH 0x39
74 #define ADM9240_REG_TEMP_HYST 0x3a
75 #define ADM9240_REG_ANALOG_OUT 0x19
76 #define ADM9240_REG_CHASSIS_CLEAR 0x46
77 #define ADM9240_REG_VID_FAN_DIV 0x47
78 #define ADM9240_REG_I2C_ADDR 0x48
79 #define ADM9240_REG_VID4 0x49
80 #define ADM9240_REG_TEMP_CONF 0x4b
82 /* generalised scaling with integer rounding */
83 static inline int SCALE(long val, int mul, int div)
86 return (val * mul - div / 2) / div;
88 return (val * mul + div / 2) / div;
91 /* adm9240 internally scales voltage measurements */
92 static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 };
94 static inline unsigned int IN_FROM_REG(u8 reg, int n)
96 return SCALE(reg, nom_mv[n], 192);
99 static inline u8 IN_TO_REG(unsigned long val, int n)
101 return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255);
104 /* temperature range: -40..125, 127 disables temperature alarm */
105 static inline s8 TEMP_TO_REG(long val)
107 return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127);
110 /* two fans, each with low fan speed limit */
111 static inline unsigned int FAN_FROM_REG(u8 reg, u8 div)
113 if (!reg) /* error */
119 return SCALE(1350000, 1, reg * div);
122 /* analog out 0..1250mV */
123 static inline u8 AOUT_TO_REG(unsigned long val)
125 return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255);
128 static inline unsigned int AOUT_FROM_REG(u8 reg)
130 return SCALE(reg, 1250, 255);
133 static int adm9240_attach_adapter(struct i2c_adapter *adapter);
134 static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind);
135 static void adm9240_init_client(struct i2c_client *client);
136 static int adm9240_detach_client(struct i2c_client *client);
137 static struct adm9240_data *adm9240_update_device(struct device *dev);
140 static struct i2c_driver adm9240_driver = {
141 .owner = THIS_MODULE,
143 .id = I2C_DRIVERID_ADM9240,
144 .flags = I2C_DF_NOTIFY,
145 .attach_adapter = adm9240_attach_adapter,
146 .detach_client = adm9240_detach_client,
149 /* per client data */
150 struct adm9240_data {
152 struct i2c_client client;
153 struct class_device *class_dev;
154 struct semaphore update_lock;
156 unsigned long last_updated_measure;
157 unsigned long last_updated_config;
159 u8 in[6]; /* ro in0_input */
160 u8 in_max[6]; /* rw in0_max */
161 u8 in_min[6]; /* rw in0_min */
162 u8 fan[2]; /* ro fan1_input */
163 u8 fan_min[2]; /* rw fan1_min */
164 u8 fan_div[2]; /* rw fan1_div, read-only accessor */
165 s16 temp; /* ro temp1_input, 9-bit sign-extended */
166 s8 temp_high; /* rw temp1_max */
167 s8 temp_hyst; /* rw temp1_max_hyst */
168 u16 alarms; /* ro alarms */
169 u8 aout; /* rw aout_output */
171 u8 vrm; /* -- vrm set on startup, no accessor */
174 /* i2c byte read/write interface */
175 static int adm9240_read_value(struct i2c_client *client, u8 reg)
177 return i2c_smbus_read_byte_data(client, reg);
180 static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value)
182 return i2c_smbus_write_byte_data(client, reg, value);
185 /*** sysfs accessors ***/
188 #define show_temp(value, scale) \
189 static ssize_t show_##value(struct device *dev, \
190 struct device_attribute *attr, \
193 struct adm9240_data *data = adm9240_update_device(dev); \
194 return sprintf(buf, "%d\n", data->value * scale); \
196 show_temp(temp_high, 1000);
197 show_temp(temp_hyst, 1000);
198 show_temp(temp, 500); /* 0.5'C per bit */
200 #define set_temp(value, reg) \
201 static ssize_t set_##value(struct device *dev, \
202 struct device_attribute *attr, \
203 const char *buf, size_t count) \
205 struct i2c_client *client = to_i2c_client(dev); \
206 struct adm9240_data *data = adm9240_update_device(dev); \
207 long temp = simple_strtoul(buf, NULL, 10); \
209 down(&data->update_lock); \
210 data->value = TEMP_TO_REG(temp); \
211 adm9240_write_value(client, reg, data->value); \
212 up(&data->update_lock); \
216 set_temp(temp_high, ADM9240_REG_TEMP_HIGH);
217 set_temp(temp_hyst, ADM9240_REG_TEMP_HYST);
219 static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
220 show_temp_high, set_temp_high);
221 static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
222 show_temp_hyst, set_temp_hyst);
223 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
226 static ssize_t show_in(struct device *dev, char *buf, int nr)
228 struct adm9240_data *data = adm9240_update_device(dev);
229 return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr));
232 static ssize_t show_in_min(struct device *dev, char *buf, int nr)
234 struct adm9240_data *data = adm9240_update_device(dev);
235 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr));
238 static ssize_t show_in_max(struct device *dev, char *buf, int nr)
240 struct adm9240_data *data = adm9240_update_device(dev);
241 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr));
244 static ssize_t set_in_min(struct device *dev, const char *buf,
245 size_t count, int nr)
247 struct i2c_client *client = to_i2c_client(dev);
248 struct adm9240_data *data = i2c_get_clientdata(client);
249 unsigned long val = simple_strtoul(buf, NULL, 10);
251 down(&data->update_lock);
252 data->in_min[nr] = IN_TO_REG(val, nr);
253 adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]);
254 up(&data->update_lock);
258 static ssize_t set_in_max(struct device *dev, const char *buf,
259 size_t count, int nr)
261 struct i2c_client *client = to_i2c_client(dev);
262 struct adm9240_data *data = i2c_get_clientdata(client);
263 unsigned long val = simple_strtoul(buf, NULL, 10);
265 down(&data->update_lock);
266 data->in_max[nr] = IN_TO_REG(val, nr);
267 adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]);
268 up(&data->update_lock);
272 #define show_in_offset(offset) \
273 static ssize_t show_in##offset(struct device *dev, \
274 struct device_attribute *attr, \
277 return show_in(dev, buf, offset); \
279 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \
280 static ssize_t show_in##offset##_min(struct device *dev, \
281 struct device_attribute *attr, \
284 return show_in_min(dev, buf, offset); \
286 static ssize_t show_in##offset##_max(struct device *dev, \
287 struct device_attribute *attr, \
290 return show_in_max(dev, buf, offset); \
293 set_in##offset##_min(struct device *dev, \
294 struct device_attribute *attr, const char *buf, \
297 return set_in_min(dev, buf, count, offset); \
300 set_in##offset##_max(struct device *dev, \
301 struct device_attribute *attr, const char *buf, \
304 return set_in_max(dev, buf, count, offset); \
306 static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
307 show_in##offset##_min, set_in##offset##_min); \
308 static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
309 show_in##offset##_max, set_in##offset##_max);
319 static ssize_t show_fan(struct device *dev, char *buf, int nr)
321 struct adm9240_data *data = adm9240_update_device(dev);
322 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
323 1 << data->fan_div[nr]));
326 static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
328 struct adm9240_data *data = adm9240_update_device(dev);
329 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
330 1 << data->fan_div[nr]));
333 static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
335 struct adm9240_data *data = adm9240_update_device(dev);
336 return sprintf(buf, "%d\n", 1 << data->fan_div[nr]);
339 /* write new fan div, callers must hold data->update_lock */
340 static void adm9240_write_fan_div(struct i2c_client *client, int nr,
343 u8 reg, old, shift = (nr + 2) * 2;
345 reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
346 old = (reg >> shift) & 3;
347 reg &= ~(3 << shift);
348 reg |= (fan_div << shift);
349 adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg);
350 dev_dbg(&client->dev, "fan%d clock divider changed from %u "
351 "to %u\n", nr + 1, 1 << old, 1 << fan_div);
355 * set fan speed low limit:
357 * - value is zero: disable fan speed low limit alarm
359 * - value is below fan speed measurement range: enable fan speed low
360 * limit alarm to be asserted while fan speed too slow to measure
362 * - otherwise: select fan clock divider to suit fan speed low limit,
363 * measurement code may adjust registers to ensure fan speed reading
365 static ssize_t set_fan_min(struct device *dev, const char *buf,
366 size_t count, int nr)
368 struct i2c_client *client = to_i2c_client(dev);
369 struct adm9240_data *data = i2c_get_clientdata(client);
370 unsigned long val = simple_strtoul(buf, NULL, 10);
373 down(&data->update_lock);
376 data->fan_min[nr] = 255;
377 new_div = data->fan_div[nr];
379 dev_dbg(&client->dev, "fan%u low limit set disabled\n",
382 } else if (val < 1350000 / (8 * 254)) {
384 data->fan_min[nr] = 254;
386 dev_dbg(&client->dev, "fan%u low limit set minimum %u\n",
387 nr + 1, FAN_FROM_REG(254, 1 << new_div));
390 unsigned int new_min = 1350000 / val;
393 while (new_min > 192 && new_div < 3) {
397 if (!new_min) /* keep > 0 */
400 data->fan_min[nr] = new_min;
402 dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n",
403 nr + 1, FAN_FROM_REG(new_min, 1 << new_div));
406 if (new_div != data->fan_div[nr]) {
407 data->fan_div[nr] = new_div;
408 adm9240_write_fan_div(client, nr, new_div);
410 adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr),
413 up(&data->update_lock);
417 #define show_fan_offset(offset) \
418 static ssize_t show_fan_##offset (struct device *dev, \
419 struct device_attribute *attr, \
422 return show_fan(dev, buf, offset - 1); \
424 static ssize_t show_fan_##offset##_div (struct device *dev, \
425 struct device_attribute *attr, \
428 return show_fan_div(dev, buf, offset - 1); \
430 static ssize_t show_fan_##offset##_min (struct device *dev, \
431 struct device_attribute *attr, \
434 return show_fan_min(dev, buf, offset - 1); \
436 static ssize_t set_fan_##offset##_min (struct device *dev, \
437 struct device_attribute *attr, \
438 const char *buf, size_t count) \
440 return set_fan_min(dev, buf, count, offset - 1); \
442 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
443 show_fan_##offset, NULL); \
444 static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
445 show_fan_##offset##_div, NULL); \
446 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
447 show_fan_##offset##_min, set_fan_##offset##_min);
453 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
455 struct adm9240_data *data = adm9240_update_device(dev);
456 return sprintf(buf, "%u\n", data->alarms);
458 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
461 static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
463 struct adm9240_data *data = adm9240_update_device(dev);
464 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
466 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
469 static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
471 struct adm9240_data *data = adm9240_update_device(dev);
472 return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
475 static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
477 struct i2c_client *client = to_i2c_client(dev);
478 struct adm9240_data *data = i2c_get_clientdata(client);
479 unsigned long val = simple_strtol(buf, NULL, 10);
481 down(&data->update_lock);
482 data->aout = AOUT_TO_REG(val);
483 adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout);
484 up(&data->update_lock);
487 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
490 static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
492 struct i2c_client *client = to_i2c_client(dev);
493 unsigned long val = simple_strtol(buf, NULL, 10);
496 adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
497 dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
501 static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
504 /*** sensor chip detect and driver install ***/
506 static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind)
508 struct i2c_client *new_client;
509 struct adm9240_data *data;
511 const char *name = "";
514 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
517 if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) {
521 memset(data, 0, sizeof(struct adm9240_data));
523 new_client = &data->client;
524 i2c_set_clientdata(new_client, data);
525 new_client->addr = address;
526 new_client->adapter = adapter;
527 new_client->driver = &adm9240_driver;
528 new_client->flags = 0;
536 /* verify chip: reg address should match i2c address */
537 if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR)
539 dev_err(&adapter->dev, "detect fail: address match, "
540 "0x%02x\n", address);
544 /* check known chip manufacturer */
545 man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID);
547 if (man_id == 0x23) {
549 } else if (man_id == 0xda) {
551 } else if (man_id == 0x01) {
554 dev_err(&adapter->dev, "detect fail: unknown manuf, "
559 /* successful detect, print chip info */
560 die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV);
561 dev_info(&adapter->dev, "found %s revision %u\n",
562 man_id == 0x23 ? "ADM9240" :
563 man_id == 0xda ? "DS1780" : "LM81", die_rev);
566 /* either forced or detected chip kind */
567 if (kind == adm9240) {
569 } else if (kind == ds1780) {
571 } else if (kind == lm81) {
575 /* fill in the remaining client fields and attach */
576 strlcpy(new_client->name, name, I2C_NAME_SIZE);
578 init_MUTEX(&data->update_lock);
580 if ((err = i2c_attach_client(new_client)))
583 adm9240_init_client(new_client);
585 /* populate sysfs filesystem */
586 data->class_dev = hwmon_device_register(&new_client->dev);
587 if (IS_ERR(data->class_dev)) {
588 err = PTR_ERR(data->class_dev);
592 device_create_file(&new_client->dev, &dev_attr_in0_input);
593 device_create_file(&new_client->dev, &dev_attr_in0_min);
594 device_create_file(&new_client->dev, &dev_attr_in0_max);
595 device_create_file(&new_client->dev, &dev_attr_in1_input);
596 device_create_file(&new_client->dev, &dev_attr_in1_min);
597 device_create_file(&new_client->dev, &dev_attr_in1_max);
598 device_create_file(&new_client->dev, &dev_attr_in2_input);
599 device_create_file(&new_client->dev, &dev_attr_in2_min);
600 device_create_file(&new_client->dev, &dev_attr_in2_max);
601 device_create_file(&new_client->dev, &dev_attr_in3_input);
602 device_create_file(&new_client->dev, &dev_attr_in3_min);
603 device_create_file(&new_client->dev, &dev_attr_in3_max);
604 device_create_file(&new_client->dev, &dev_attr_in4_input);
605 device_create_file(&new_client->dev, &dev_attr_in4_min);
606 device_create_file(&new_client->dev, &dev_attr_in4_max);
607 device_create_file(&new_client->dev, &dev_attr_in5_input);
608 device_create_file(&new_client->dev, &dev_attr_in5_min);
609 device_create_file(&new_client->dev, &dev_attr_in5_max);
610 device_create_file(&new_client->dev, &dev_attr_temp1_max);
611 device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
612 device_create_file(&new_client->dev, &dev_attr_temp1_input);
613 device_create_file(&new_client->dev, &dev_attr_fan1_input);
614 device_create_file(&new_client->dev, &dev_attr_fan1_div);
615 device_create_file(&new_client->dev, &dev_attr_fan1_min);
616 device_create_file(&new_client->dev, &dev_attr_fan2_input);
617 device_create_file(&new_client->dev, &dev_attr_fan2_div);
618 device_create_file(&new_client->dev, &dev_attr_fan2_min);
619 device_create_file(&new_client->dev, &dev_attr_alarms);
620 device_create_file(&new_client->dev, &dev_attr_aout_output);
621 device_create_file(&new_client->dev, &dev_attr_chassis_clear);
622 device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
627 i2c_detach_client(new_client);
634 static int adm9240_attach_adapter(struct i2c_adapter *adapter)
636 if (!(adapter->class & I2C_CLASS_HWMON))
638 return i2c_detect(adapter, &addr_data, adm9240_detect);
641 static int adm9240_detach_client(struct i2c_client *client)
643 struct adm9240_data *data = i2c_get_clientdata(client);
646 hwmon_device_unregister(data->class_dev);
648 if ((err = i2c_detach_client(client)))
655 static void adm9240_init_client(struct i2c_client *client)
657 struct adm9240_data *data = i2c_get_clientdata(client);
658 u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
659 u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
661 data->vrm = i2c_which_vrm(); /* need this to report vid as mV */
663 dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
666 if (conf & 1) { /* measurement cycle running: report state */
668 dev_info(&client->dev, "status: config 0x%02x mode %u\n",
671 } else { /* cold start: open limits before starting chip */
674 for (i = 0; i < 6; i++)
676 adm9240_write_value(client,
677 ADM9240_REG_IN_MIN(i), 0);
678 adm9240_write_value(client,
679 ADM9240_REG_IN_MAX(i), 255);
681 adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255);
682 adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255);
683 adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127);
684 adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127);
686 /* start measurement cycle */
687 adm9240_write_value(client, ADM9240_REG_CONFIG, 1);
689 dev_info(&client->dev, "cold start: config was 0x%02x "
690 "mode %u\n", conf, mode);
694 static struct adm9240_data *adm9240_update_device(struct device *dev)
696 struct i2c_client *client = to_i2c_client(dev);
697 struct adm9240_data *data = i2c_get_clientdata(client);
700 down(&data->update_lock);
702 /* minimum measurement cycle: 1.75 seconds */
703 if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
706 for (i = 0; i < 6; i++) /* read voltages */
708 data->in[i] = adm9240_read_value(client,
711 data->alarms = adm9240_read_value(client,
712 ADM9240_REG_INT(0)) |
713 adm9240_read_value(client,
714 ADM9240_REG_INT(1)) << 8;
716 /* read temperature: assume temperature changes less than
717 * 0.5'C per two measurement cycles thus ignore possible
718 * but unlikely aliasing error on lsb reading. --Grant */
719 data->temp = ((adm9240_read_value(client,
720 ADM9240_REG_TEMP) << 8) |
721 adm9240_read_value(client,
722 ADM9240_REG_TEMP_CONF)) / 128;
724 for (i = 0; i < 2; i++) /* read fans */
726 data->fan[i] = adm9240_read_value(client,
729 /* adjust fan clock divider on overflow */
730 if (data->valid && data->fan[i] == 255 &&
731 data->fan_div[i] < 3) {
733 adm9240_write_fan_div(client, i,
736 /* adjust fan_min if active, but not to 0 */
737 if (data->fan_min[i] < 255 &&
738 data->fan_min[i] >= 2)
739 data->fan_min[i] /= 2;
742 data->last_updated_measure = jiffies;
745 /* minimum config reading cycle: 300 seconds */
746 if (time_after(jiffies, data->last_updated_config + (HZ * 300))
749 for (i = 0; i < 6; i++)
751 data->in_min[i] = adm9240_read_value(client,
752 ADM9240_REG_IN_MIN(i));
753 data->in_max[i] = adm9240_read_value(client,
754 ADM9240_REG_IN_MAX(i));
756 for (i = 0; i < 2; i++)
758 data->fan_min[i] = adm9240_read_value(client,
759 ADM9240_REG_FAN_MIN(i));
761 data->temp_high = adm9240_read_value(client,
762 ADM9240_REG_TEMP_HIGH);
763 data->temp_hyst = adm9240_read_value(client,
764 ADM9240_REG_TEMP_HYST);
766 /* read fan divs and 5-bit VID */
767 i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
768 data->fan_div[0] = (i >> 4) & 3;
769 data->fan_div[1] = (i >> 6) & 3;
770 data->vid = i & 0x0f;
771 data->vid |= (adm9240_read_value(client,
772 ADM9240_REG_VID4) & 1) << 4;
773 /* read analog out */
774 data->aout = adm9240_read_value(client,
775 ADM9240_REG_ANALOG_OUT);
777 data->last_updated_config = jiffies;
780 up(&data->update_lock);
784 static int __init sensors_adm9240_init(void)
786 return i2c_add_driver(&adm9240_driver);
789 static void __exit sensors_adm9240_exit(void)
791 i2c_del_driver(&adm9240_driver);
794 MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, "
795 "Grant Coady <gcoady@gmail.com> and others");
796 MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver");
797 MODULE_LICENSE("GPL");
799 module_init(sensors_adm9240_init);
800 module_exit(sensors_adm9240_exit);