2 # Hardware monitoring chip drivers configuration
5 menu "Hardware Monitoring support"
8 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 To find out which specific driver(s) you need, use the
20 sensors-detect script from the lm_sensors package. Read
21 <file:Documentation/hwmon/userspace-tools> for details.
23 This support can also be built as a module. If so, the module
30 config SENSORS_ABITUGURU
32 depends on HWMON && EXPERIMENTAL
34 If you say yes here you get support for the Abit uGuru chips
35 sensor part. The voltage and frequency control parts of the Abit
36 uGuru are not supported. The Abit uGuru chip can be found on Abit
37 uGuru featuring motherboards (most modern Abit motherboards).
39 This driver can also be built as a module. If so, the module
40 will be called abituguru.
42 config SENSORS_ADM1021
43 tristate "Analog Devices ADM1021 and compatibles"
44 depends on HWMON && I2C
46 If you say yes here you get support for Analog Devices ADM1021
47 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
48 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
49 and the XEON processor built-in sensor.
51 This driver can also be built as a module. If so, the module
52 will be called adm1021.
54 config SENSORS_ADM1025
55 tristate "Analog Devices ADM1025 and compatibles"
56 depends on HWMON && I2C
59 If you say yes here you get support for Analog Devices ADM1025
60 and Philips NE1619 sensor chips.
62 This driver can also be built as a module. If so, the module
63 will be called adm1025.
65 config SENSORS_ADM1026
66 tristate "Analog Devices ADM1026 and compatibles"
67 depends on HWMON && I2C && EXPERIMENTAL
70 If you say yes here you get support for Analog Devices ADM1026
73 This driver can also be built as a module. If so, the module
74 will be called adm1026.
76 config SENSORS_ADM1029
77 tristate "Analog Devices ADM1029"
78 depends on HWMON && I2C && EXPERIMENTAL
80 If you say yes here you get support for Analog Devices ADM1029
82 Very rare chip, please let us know you use it.
84 This driver can also be built as a module. If so, the module
85 will be called adm1029.
87 config SENSORS_ADM1031
88 tristate "Analog Devices ADM1031 and compatibles"
89 depends on HWMON && I2C && EXPERIMENTAL
91 If you say yes here you get support for Analog Devices ADM1031
92 and ADM1030 sensor chips.
94 This driver can also be built as a module. If so, the module
95 will be called adm1031.
97 config SENSORS_ADM9240
98 tristate "Analog Devices ADM9240 and compatibles"
99 depends on HWMON && I2C && EXPERIMENTAL
102 If you say yes here you get support for Analog Devices ADM9240,
103 Dallas DS1780, National Semiconductor LM81 sensor chips.
105 This driver can also be built as a module. If so, the module
106 will be called adm9240.
108 config SENSORS_K8TEMP
109 tristate "AMD Athlon64/FX or Opteron temperature sensor"
110 depends on HWMON && X86 && PCI && EXPERIMENTAL
112 If you say yes here you get support for the temperature
113 sensor(s) inside your CPU. Supported is whole AMD K8
114 microarchitecture. Please note that you will need at least
115 lm-sensors 2.10.1 for proper userspace support.
117 This driver can also be built as a module. If so, the module
118 will be called k8temp.
121 tristate "Apple Motion Sensor driver"
122 depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
124 Support for the motion sensor included in PowerBooks. Includes
125 implementations for PMU and I2C.
127 This driver can also be built as a module. If so, the module
130 config SENSORS_AMS_PMU
132 depends on SENSORS_AMS && ADB_PMU
135 PMU variant of motion sensor, found in late 2005 PowerBooks.
137 config SENSORS_AMS_I2C
139 depends on SENSORS_AMS && I2C
142 I2C variant of motion sensor, found in early 2005 PowerBooks and
145 config SENSORS_ASB100
146 tristate "Asus ASB100 Bach"
147 depends on HWMON && I2C && EXPERIMENTAL
150 If you say yes here you get support for the ASB100 Bach sensor
151 chip found on some Asus mainboards.
153 This driver can also be built as a module. If so, the module
154 will be called asb100.
157 tristate "Attansic ATXP1 VID controller"
158 depends on HWMON && I2C && EXPERIMENTAL
161 If you say yes here you get support for the Attansic ATXP1 VID
164 If your board have such a chip, you are able to control your CPU
165 core and other voltages.
167 This driver can also be built as a module. If so, the module
168 will be called atxp1.
170 config SENSORS_DS1621
171 tristate "Dallas Semiconductor DS1621 and DS1625"
172 depends on HWMON && I2C
174 If you say yes here you get support for Dallas Semiconductor
175 DS1621 and DS1625 sensor chips.
177 This driver can also be built as a module. If so, the module
178 will be called ds1621.
180 config SENSORS_F71805F
181 tristate "Fintek F71805F/FG and F71872F/FG"
182 depends on HWMON && EXPERIMENTAL
184 If you say yes here you get support for hardware monitoring
185 features of the Fintek F71805F/FG and F71872F/FG Super-I/O
188 This driver can also be built as a module. If so, the module
189 will be called f71805f.
191 config SENSORS_FSCHER
192 tristate "FSC Hermes"
193 depends on HWMON && I2C
195 If you say yes here you get support for Fujitsu Siemens
196 Computers Hermes sensor chips.
198 This driver can also be built as a module. If so, the module
199 will be called fscher.
201 config SENSORS_FSCPOS
202 tristate "FSC Poseidon"
203 depends on HWMON && I2C
205 If you say yes here you get support for Fujitsu Siemens
206 Computers Poseidon sensor chips.
208 This driver can also be built as a module. If so, the module
209 will be called fscpos.
211 config SENSORS_GL518SM
212 tristate "Genesys Logic GL518SM"
213 depends on HWMON && I2C
215 If you say yes here you get support for Genesys Logic GL518SM
218 This driver can also be built as a module. If so, the module
219 will be called gl518sm.
221 config SENSORS_GL520SM
222 tristate "Genesys Logic GL520SM"
223 depends on HWMON && I2C
226 If you say yes here you get support for Genesys Logic GL520SM
229 This driver can also be built as a module. If so, the module
230 will be called gl520sm.
232 config SENSORS_CORETEMP
233 tristate "Intel Core (2) Duo/Solo temperature sensor"
234 depends on HWMON && X86 && EXPERIMENTAL
236 If you say yes here you get support for the temperature
237 sensor inside your CPU. Supported all are all known variants
238 of Intel Core family.
241 tristate "ITE IT87xx and compatibles"
242 depends on HWMON && I2C
246 If you say yes here you get support for ITE IT8705F, IT8712F,
247 IT8716F and IT8718F sensor chips, and the SiS960 clone.
249 This driver can also be built as a module. If so, the module
253 tristate "National Semiconductor LM63"
254 depends on HWMON && I2C
256 If you say yes here you get support for the National Semiconductor
257 LM63 remote diode digital temperature sensor with integrated fan
258 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
259 motherboard, among others.
261 This driver can also be built as a module. If so, the module
265 tristate "National Semiconductor LM70"
266 depends on HWMON && SPI_MASTER && EXPERIMENTAL
268 If you say yes here you get support for the National Semiconductor
269 LM70 digital temperature sensor chip.
271 This driver can also be built as a module. If so, the module
275 tristate "National Semiconductor LM75 and compatibles"
276 depends on HWMON && I2C
278 If you say yes here you get support for National Semiconductor LM75
279 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
280 9-bit precision mode), and TelCom (now Microchip) TCN75.
282 The DS75 and DS1775 in 10- to 12-bit precision modes will require
283 a force module parameter. The driver will not handle the extra
286 This driver can also be built as a module. If so, the module
290 tristate "National Semiconductor LM77"
291 depends on HWMON && I2C
293 If you say yes here you get support for National Semiconductor LM77
296 This driver can also be built as a module. If so, the module
300 tristate "National Semiconductor LM78 and compatibles"
301 depends on HWMON && I2C
304 If you say yes here you get support for National Semiconductor LM78,
307 This driver can also be built as a module. If so, the module
311 tristate "National Semiconductor LM80"
312 depends on HWMON && I2C && EXPERIMENTAL
314 If you say yes here you get support for National Semiconductor
317 This driver can also be built as a module. If so, the module
321 tristate "National Semiconductor LM83 and compatibles"
322 depends on HWMON && I2C
324 If you say yes here you get support for National Semiconductor
325 LM82 and LM83 sensor chips.
327 This driver can also be built as a module. If so, the module
331 tristate "National Semiconductor LM85 and compatibles"
332 depends on HWMON && I2C && EXPERIMENTAL
335 If you say yes here you get support for National Semiconductor LM85
336 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
338 This driver can also be built as a module. If so, the module
342 tristate "National Semiconductor LM87"
343 depends on HWMON && I2C
346 If you say yes here you get support for National Semiconductor LM87
349 This driver can also be built as a module. If so, the module
353 tristate "National Semiconductor LM90 and compatibles"
354 depends on HWMON && I2C
356 If you say yes here you get support for National Semiconductor LM90,
357 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
358 MAX6658 sensor chips.
360 The Analog Devices ADT7461 sensor chip is also supported, but only
361 if found in ADM1032 compatibility mode.
363 This driver can also be built as a module. If so, the module
367 tristate "National Semiconductor LM92 and compatibles"
368 depends on HWMON && I2C
370 If you say yes here you get support for National Semiconductor LM92
371 and Maxim MAX6635 sensor chips.
373 This driver can also be built as a module. If so, the module
376 config SENSORS_MAX1619
377 tristate "Maxim MAX1619 sensor chip"
378 depends on HWMON && I2C
380 If you say yes here you get support for MAX1619 sensor chip.
382 This driver can also be built as a module. If so, the module
383 will be called max1619.
385 config SENSORS_MAX6650
386 tristate "Maxim MAX6650 sensor chip"
387 depends on HWMON && I2C && EXPERIMENTAL
389 If you say yes here you get support for the MAX6650 / MAX6651
392 This driver can also be built as a module. If so, the module
393 will be called max6650.
395 config SENSORS_PC87360
396 tristate "National Semiconductor PC87360 family"
397 depends on HWMON && I2C && EXPERIMENTAL
401 If you say yes here you get access to the hardware monitoring
402 functions of the National Semiconductor PC8736x Super-I/O chips.
403 The PC87360, PC87363 and PC87364 only have fan monitoring and
404 control. The PC87365 and PC87366 additionally have voltage and
405 temperature monitoring.
407 This driver can also be built as a module. If so, the module
408 will be called pc87360.
410 config SENSORS_PC87427
411 tristate "National Semiconductor PC87427"
412 depends on HWMON && EXPERIMENTAL
414 If you say yes here you get access to the hardware monitoring
415 functions of the National Semiconductor PC87427 Super-I/O chip.
416 The chip has two distinct logical devices, one for fan speed
417 monitoring and control, and one for voltage and temperature
418 monitoring. Only fan speed monitoring is supported right now.
420 This driver can also be built as a module. If so, the module
421 will be called pc87427.
423 config SENSORS_SIS5595
424 tristate "Silicon Integrated Systems Corp. SiS5595"
425 depends on HWMON && I2C && PCI && EXPERIMENTAL
428 If you say yes here you get support for the integrated sensors in
429 SiS5595 South Bridges.
431 This driver can also be built as a module. If so, the module
432 will be called sis5595.
434 config SENSORS_SMSC47M1
435 tristate "SMSC LPC47M10x and compatibles"
438 If you say yes here you get support for the integrated fan
439 monitoring and control capabilities of the SMSC LPC47B27x,
440 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
441 LPC47M192, LPC47M292 and LPC47M997 chips.
443 The temperature and voltage sensor features of the LPC47M15x,
444 LPC47M192, LPC47M292 and LPC47M997 are supported by another
445 driver, select also "SMSC LPC47M192 and compatibles" below for
448 This driver can also be built as a module. If so, the module
449 will be called smsc47m1.
451 config SENSORS_SMSC47M192
452 tristate "SMSC LPC47M192 and compatibles"
453 depends on HWMON && I2C && EXPERIMENTAL
456 If you say yes here you get support for the temperature and
457 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
460 The fan monitoring and control capabilities of these chips
461 are supported by another driver, select
462 "SMSC LPC47M10x and compatibles" above. You need both drivers
463 if you want fan control and voltage/temperature sensor support.
465 This driver can also be built as a module. If so, the module
466 will be called smsc47m192.
468 config SENSORS_SMSC47B397
469 tristate "SMSC LPC47B397-NC"
470 depends on HWMON && I2C && EXPERIMENTAL
473 If you say yes here you get support for the SMSC LPC47B397-NC
476 This driver can also be built as a module. If so, the module
477 will be called smsc47b397.
479 config SENSORS_VIA686A
481 depends on HWMON && I2C && PCI
484 If you say yes here you get support for the integrated sensors in
485 Via 686A/B South Bridges.
487 This driver can also be built as a module. If so, the module
488 will be called via686a.
490 config SENSORS_VT1211
491 tristate "VIA VT1211"
492 depends on HWMON && EXPERIMENTAL
495 If you say yes here then you get support for hardware monitoring
496 features of the VIA VT1211 Super-I/O chip.
498 This driver can also be built as a module. If so, the module
499 will be called vt1211.
501 config SENSORS_VT8231
502 tristate "VIA VT8231"
503 depends on HWMON && I2C && PCI && EXPERIMENTAL
507 If you say yes here then you get support for the integrated sensors
508 in the VIA VT8231 device.
510 This driver can also be built as a module. If so, the module
511 will be called vt8231.
513 config SENSORS_W83781D
514 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
515 depends on HWMON && I2C
519 If you say yes here you get support for the Winbond W8378x series
520 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
521 and the similar Asus AS99127F.
523 This driver can also be built as a module. If so, the module
524 will be called w83781d.
526 config SENSORS_W83791D
527 tristate "Winbond W83791D"
528 depends on HWMON && I2C && EXPERIMENTAL
531 If you say yes here you get support for the Winbond W83791D chip.
533 This driver can also be built as a module. If so, the module
534 will be called w83791d.
536 config SENSORS_W83792D
537 tristate "Winbond W83792D"
538 depends on HWMON && I2C && EXPERIMENTAL
540 If you say yes here you get support for the Winbond W83792D chip.
542 This driver can also be built as a module. If so, the module
543 will be called w83792d.
545 config SENSORS_W83793
546 tristate "Winbond W83793"
547 depends on HWMON && I2C && EXPERIMENTAL
550 If you say yes here you get support for the Winbond W83793
551 hardware monitoring chip.
553 This driver can also be built as a module. If so, the module
554 will be called w83793.
556 config SENSORS_W83L785TS
557 tristate "Winbond W83L785TS-S"
558 depends on HWMON && I2C && EXPERIMENTAL
560 If you say yes here you get support for the Winbond W83L785TS-S
561 sensor chip, which is used on the Asus A7N8X, among other
564 This driver can also be built as a module. If so, the module
565 will be called w83l785ts.
567 config SENSORS_W83627HF
568 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
572 If you say yes here you get support for the Winbond W836X7 series
573 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
576 This driver can also be built as a module. If so, the module
577 will be called w83627hf.
579 config SENSORS_W83627EHF
580 tristate "Winbond W83627EHF"
581 depends on HWMON && I2C && EXPERIMENTAL
584 If you say yes here you get preliminary support for the hardware
585 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
586 Only fan and temperature inputs are supported at the moment, while
587 the chip does much more than that.
589 This driver also supports the W83627EHG, which is the lead-free
590 version of the W83627EHF.
592 This driver can also be built as a module. If so, the module
593 will be called w83627ehf.
596 tristate "IBM Hard Drive Active Protection System (hdaps)"
597 depends on HWMON && INPUT && X86
600 This driver provides support for the IBM Hard Drive Active Protection
601 System (hdaps), which provides an accelerometer and other misc. data.
602 ThinkPads starting with the R50, T41, and X40 are supported. The
603 accelerometer data is readable via sysfs.
605 This driver also provides an absolute input class device, allowing
606 the laptop to act as a pinball machine-esque joystick.
608 If your ThinkPad is not recognized by the driver, please update to latest
609 BIOS. This is especially the case for some R52 ThinkPads.
611 Say Y here if you have an applicable laptop and want to experience
612 the awesome power of hdaps.
614 config HWMON_DEBUG_CHIP
615 bool "Hardware Monitoring Chip debugging messages"
619 Say Y here if you want the I2C chip drivers to produce a bunch of
620 debug messages to the system log. Select this if you are having
621 a problem with I2C support and want to see more of what is going