2 # Hardware monitoring chip drivers configuration
5 menu "Hardware Monitoring support"
8 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 To find out which specific driver(s) you need, use the
20 sensors-detect script from the lm_sensors package. Read
21 <file:Documentation/hwmon/userspace-tools> for details.
23 This support can also be built as a module. If so, the module
30 config SENSORS_ABITUGURU
32 depends on HWMON && EXPERIMENTAL
34 If you say yes here you get support for the Abit uGuru chips
35 sensor part. The voltage and frequency control parts of the Abit
36 uGuru are not supported. The Abit uGuru chip can be found on Abit
37 uGuru featuring motherboards (most modern Abit motherboards).
39 This driver can also be built as a module. If so, the module
40 will be called abituguru.
42 config SENSORS_ADM1021
43 tristate "Analog Devices ADM1021 and compatibles"
44 depends on HWMON && I2C
46 If you say yes here you get support for Analog Devices ADM1021
47 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
48 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
49 and the XEON processor built-in sensor.
51 This driver can also be built as a module. If so, the module
52 will be called adm1021.
54 config SENSORS_ADM1025
55 tristate "Analog Devices ADM1025 and compatibles"
56 depends on HWMON && I2C
59 If you say yes here you get support for Analog Devices ADM1025
60 and Philips NE1619 sensor chips.
62 This driver can also be built as a module. If so, the module
63 will be called adm1025.
65 config SENSORS_ADM1026
66 tristate "Analog Devices ADM1026 and compatibles"
67 depends on HWMON && I2C && EXPERIMENTAL
70 If you say yes here you get support for Analog Devices ADM1026
73 This driver can also be built as a module. If so, the module
74 will be called adm1026.
76 config SENSORS_ADM1029
77 tristate "Analog Devices ADM1029"
78 depends on HWMON && I2C && EXPERIMENTAL
80 If you say yes here you get support for Analog Devices ADM1029
82 Very rare chip, please let us know you use it.
84 This driver can also be built as a module. If so, the module
85 will be called adm1029.
87 config SENSORS_ADM1031
88 tristate "Analog Devices ADM1031 and compatibles"
89 depends on HWMON && I2C && EXPERIMENTAL
91 If you say yes here you get support for Analog Devices ADM1031
92 and ADM1030 sensor chips.
94 This driver can also be built as a module. If so, the module
95 will be called adm1031.
97 config SENSORS_ADM9240
98 tristate "Analog Devices ADM9240 and compatibles"
99 depends on HWMON && I2C && EXPERIMENTAL
102 If you say yes here you get support for Analog Devices ADM9240,
103 Dallas DS1780, National Semiconductor LM81 sensor chips.
105 This driver can also be built as a module. If so, the module
106 will be called adm9240.
108 config SENSORS_K8TEMP
109 tristate "AMD Athlon64/FX or Opteron temperature sensor"
110 depends on HWMON && X86 && PCI && EXPERIMENTAL
112 If you say yes here you get support for the temperature
113 sensor(s) inside your CPU. Supported is whole AMD K8
114 microarchitecture. Please note that you will need at least
115 lm-sensors 2.10.1 for proper userspace support.
117 This driver can also be built as a module. If so, the module
118 will be called k8temp.
121 tristate "Apple Motion Sensor driver"
122 depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
124 Support for the motion sensor included in PowerBooks. Includes
125 implementations for PMU and I2C.
127 This driver can also be built as a module. If so, the module
130 config SENSORS_AMS_PMU
132 depends on SENSORS_AMS && ADB_PMU
135 PMU variant of motion sensor, found in late 2005 PowerBooks.
137 config SENSORS_AMS_I2C
139 depends on SENSORS_AMS && I2C
142 I2C variant of motion sensor, found in early 2005 PowerBooks and
145 config SENSORS_ASB100
146 tristate "Asus ASB100 Bach"
147 depends on HWMON && I2C && EXPERIMENTAL
150 If you say yes here you get support for the ASB100 Bach sensor
151 chip found on some Asus mainboards.
153 This driver can also be built as a module. If so, the module
154 will be called asb100.
157 tristate "Attansic ATXP1 VID controller"
158 depends on HWMON && I2C && EXPERIMENTAL
161 If you say yes here you get support for the Attansic ATXP1 VID
164 If your board have such a chip, you are able to control your CPU
165 core and other voltages.
167 This driver can also be built as a module. If so, the module
168 will be called atxp1.
170 config SENSORS_DS1621
171 tristate "Dallas Semiconductor DS1621 and DS1625"
172 depends on HWMON && I2C
174 If you say yes here you get support for Dallas Semiconductor
175 DS1621 and DS1625 sensor chips.
177 This driver can also be built as a module. If so, the module
178 will be called ds1621.
180 config SENSORS_F71805F
181 tristate "Fintek F71805F/FG and F71872F/FG"
182 depends on HWMON && EXPERIMENTAL
184 If you say yes here you get support for hardware monitoring
185 features of the Fintek F71805F/FG and F71872F/FG Super-I/O
188 This driver can also be built as a module. If so, the module
189 will be called f71805f.
191 config SENSORS_FSCHER
192 tristate "FSC Hermes"
193 depends on HWMON && I2C
195 If you say yes here you get support for Fujitsu Siemens
196 Computers Hermes sensor chips.
198 This driver can also be built as a module. If so, the module
199 will be called fscher.
201 config SENSORS_FSCPOS
202 tristate "FSC Poseidon"
203 depends on HWMON && I2C
205 If you say yes here you get support for Fujitsu Siemens
206 Computers Poseidon sensor chips.
208 This driver can also be built as a module. If so, the module
209 will be called fscpos.
211 config SENSORS_GL518SM
212 tristate "Genesys Logic GL518SM"
213 depends on HWMON && I2C
215 If you say yes here you get support for Genesys Logic GL518SM
218 This driver can also be built as a module. If so, the module
219 will be called gl518sm.
221 config SENSORS_GL520SM
222 tristate "Genesys Logic GL520SM"
223 depends on HWMON && I2C
226 If you say yes here you get support for Genesys Logic GL520SM
229 This driver can also be built as a module. If so, the module
230 will be called gl520sm.
233 tristate "ITE IT87xx and compatibles"
234 depends on HWMON && I2C
238 If you say yes here you get support for ITE IT8705F, IT8712F,
239 IT8716F and IT8718F sensor chips, and the SiS960 clone.
241 This driver can also be built as a module. If so, the module
245 tristate "National Semiconductor LM63"
246 depends on HWMON && I2C
248 If you say yes here you get support for the National Semiconductor
249 LM63 remote diode digital temperature sensor with integrated fan
250 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
251 motherboard, among others.
253 This driver can also be built as a module. If so, the module
257 tristate "National Semiconductor LM70"
258 depends on HWMON && SPI_MASTER && EXPERIMENTAL
260 If you say yes here you get support for the National Semiconductor
261 LM70 digital temperature sensor chip.
263 This driver can also be built as a module. If so, the module
267 tristate "National Semiconductor LM75 and compatibles"
268 depends on HWMON && I2C
270 If you say yes here you get support for National Semiconductor LM75
271 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
272 9-bit precision mode), and TelCom (now Microchip) TCN75.
274 The DS75 and DS1775 in 10- to 12-bit precision modes will require
275 a force module parameter. The driver will not handle the extra
278 This driver can also be built as a module. If so, the module
282 tristate "National Semiconductor LM77"
283 depends on HWMON && I2C
285 If you say yes here you get support for National Semiconductor LM77
288 This driver can also be built as a module. If so, the module
292 tristate "National Semiconductor LM78 and compatibles"
293 depends on HWMON && I2C
297 If you say yes here you get support for National Semiconductor LM78,
300 This driver can also be built as a module. If so, the module
304 tristate "National Semiconductor LM80"
305 depends on HWMON && I2C && EXPERIMENTAL
307 If you say yes here you get support for National Semiconductor
310 This driver can also be built as a module. If so, the module
314 tristate "National Semiconductor LM83 and compatibles"
315 depends on HWMON && I2C
317 If you say yes here you get support for National Semiconductor
318 LM82 and LM83 sensor chips.
320 This driver can also be built as a module. If so, the module
324 tristate "National Semiconductor LM85 and compatibles"
325 depends on HWMON && I2C && EXPERIMENTAL
328 If you say yes here you get support for National Semiconductor LM85
329 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
331 This driver can also be built as a module. If so, the module
335 tristate "National Semiconductor LM87"
336 depends on HWMON && I2C
339 If you say yes here you get support for National Semiconductor LM87
342 This driver can also be built as a module. If so, the module
346 tristate "National Semiconductor LM90 and compatibles"
347 depends on HWMON && I2C
349 If you say yes here you get support for National Semiconductor LM90,
350 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
351 MAX6658 sensor chips.
353 The Analog Devices ADT7461 sensor chip is also supported, but only
354 if found in ADM1032 compatibility mode.
356 This driver can also be built as a module. If so, the module
360 tristate "National Semiconductor LM92 and compatibles"
361 depends on HWMON && I2C
363 If you say yes here you get support for National Semiconductor LM92
364 and Maxim MAX6635 sensor chips.
366 This driver can also be built as a module. If so, the module
369 config SENSORS_MAX1619
370 tristate "Maxim MAX1619 sensor chip"
371 depends on HWMON && I2C
373 If you say yes here you get support for MAX1619 sensor chip.
375 This driver can also be built as a module. If so, the module
376 will be called max1619.
378 config SENSORS_PC87360
379 tristate "National Semiconductor PC87360 family"
380 depends on HWMON && I2C && EXPERIMENTAL
384 If you say yes here you get access to the hardware monitoring
385 functions of the National Semiconductor PC8736x Super-I/O chips.
386 The PC87360, PC87363 and PC87364 only have fan monitoring and
387 control. The PC87365 and PC87366 additionally have voltage and
388 temperature monitoring.
390 This driver can also be built as a module. If so, the module
391 will be called pc87360.
393 config SENSORS_PC87427
394 tristate "National Semiconductor PC87427"
395 depends on HWMON && EXPERIMENTAL
397 If you say yes here you get access to the hardware monitoring
398 functions of the National Semiconductor PC87427 Super-I/O chip.
399 The chip has two distinct logical devices, one for fan speed
400 monitoring and control, and one for voltage and temperature
401 monitoring. Only fan speed monitoring is supported right now.
403 This driver can also be built as a module. If so, the module
404 will be called pc87427.
406 config SENSORS_SIS5595
407 tristate "Silicon Integrated Systems Corp. SiS5595"
408 depends on HWMON && I2C && PCI && EXPERIMENTAL
411 If you say yes here you get support for the integrated sensors in
412 SiS5595 South Bridges.
414 This driver can also be built as a module. If so, the module
415 will be called sis5595.
417 config SENSORS_SMSC47M1
418 tristate "SMSC LPC47M10x and compatibles"
421 If you say yes here you get support for the integrated fan
422 monitoring and control capabilities of the SMSC LPC47B27x,
423 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
424 LPC47M192, LPC47M292 and LPC47M997 chips.
426 The temperature and voltage sensor features of the LPC47M15x,
427 LPC47M192, LPC47M292 and LPC47M997 are supported by another
428 driver, select also "SMSC LPC47M192 and compatibles" below for
431 This driver can also be built as a module. If so, the module
432 will be called smsc47m1.
434 config SENSORS_SMSC47M192
435 tristate "SMSC LPC47M192 and compatibles"
436 depends on HWMON && I2C && EXPERIMENTAL
439 If you say yes here you get support for the temperature and
440 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
443 The fan monitoring and control capabilities of these chips
444 are supported by another driver, select
445 "SMSC LPC47M10x and compatibles" above. You need both drivers
446 if you want fan control and voltage/temperature sensor support.
448 This driver can also be built as a module. If so, the module
449 will be called smsc47m192.
451 config SENSORS_SMSC47B397
452 tristate "SMSC LPC47B397-NC"
453 depends on HWMON && I2C && EXPERIMENTAL
456 If you say yes here you get support for the SMSC LPC47B397-NC
459 This driver can also be built as a module. If so, the module
460 will be called smsc47b397.
462 config SENSORS_VIA686A
464 depends on HWMON && I2C && PCI
467 If you say yes here you get support for the integrated sensors in
468 Via 686A/B South Bridges.
470 This driver can also be built as a module. If so, the module
471 will be called via686a.
473 config SENSORS_VT1211
474 tristate "VIA VT1211"
475 depends on HWMON && EXPERIMENTAL
478 If you say yes here then you get support for hardware monitoring
479 features of the VIA VT1211 Super-I/O chip.
481 This driver can also be built as a module. If so, the module
482 will be called vt1211.
484 config SENSORS_VT8231
485 tristate "VIA VT8231"
486 depends on HWMON && I2C && PCI && EXPERIMENTAL
490 If you say yes here then you get support for the integrated sensors
491 in the VIA VT8231 device.
493 This driver can also be built as a module. If so, the module
494 will be called vt8231.
496 config SENSORS_W83781D
497 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
498 depends on HWMON && I2C
502 If you say yes here you get support for the Winbond W8378x series
503 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
504 and the similar Asus AS99127F.
506 This driver can also be built as a module. If so, the module
507 will be called w83781d.
509 config SENSORS_W83791D
510 tristate "Winbond W83791D"
511 depends on HWMON && I2C && EXPERIMENTAL
514 If you say yes here you get support for the Winbond W83791D chip.
516 This driver can also be built as a module. If so, the module
517 will be called w83791d.
519 config SENSORS_W83792D
520 tristate "Winbond W83792D"
521 depends on HWMON && I2C && EXPERIMENTAL
523 If you say yes here you get support for the Winbond W83792D chip.
525 This driver can also be built as a module. If so, the module
526 will be called w83792d.
528 config SENSORS_W83793
529 tristate "Winbond W83793"
530 depends on HWMON && I2C && EXPERIMENTAL
533 If you say yes here you get support for the Winbond W83793
534 hardware monitoring chip.
536 This driver can also be built as a module. If so, the module
537 will be called w83793.
539 config SENSORS_W83L785TS
540 tristate "Winbond W83L785TS-S"
541 depends on HWMON && I2C && EXPERIMENTAL
543 If you say yes here you get support for the Winbond W83L785TS-S
544 sensor chip, which is used on the Asus A7N8X, among other
547 This driver can also be built as a module. If so, the module
548 will be called w83l785ts.
550 config SENSORS_W83627HF
551 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
555 If you say yes here you get support for the Winbond W836X7 series
556 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
559 This driver can also be built as a module. If so, the module
560 will be called w83627hf.
562 config SENSORS_W83627EHF
563 tristate "Winbond W83627EHF"
564 depends on HWMON && I2C && EXPERIMENTAL
567 If you say yes here you get preliminary support for the hardware
568 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
569 Only fan and temperature inputs are supported at the moment, while
570 the chip does much more than that.
572 This driver also supports the W83627EHG, which is the lead-free
573 version of the W83627EHF.
575 This driver can also be built as a module. If so, the module
576 will be called w83627ehf.
579 tristate "IBM Hard Drive Active Protection System (hdaps)"
580 depends on HWMON && INPUT && X86
583 This driver provides support for the IBM Hard Drive Active Protection
584 System (hdaps), which provides an accelerometer and other misc. data.
585 ThinkPads starting with the R50, T41, and X40 are supported. The
586 accelerometer data is readable via sysfs.
588 This driver also provides an absolute input class device, allowing
589 the laptop to act as a pinball machine-esque joystick.
591 If your ThinkPad is not recognized by the driver, please update to latest
592 BIOS. This is especially the case for some R52 ThinkPads.
594 Say Y here if you have an applicable laptop and want to experience
595 the awesome power of hdaps.
597 config HWMON_DEBUG_CHIP
598 bool "Hardware Monitoring Chip debugging messages"
602 Say Y here if you want the I2C chip drivers to produce a bunch of
603 debug messages to the system log. Select this if you are having
604 a problem with I2C support and want to see more of what is going