2 # I2C Sensor chip drivers configuration
5 menu "Hardware Monitoring support"
8 tristate "Hardware Monitoring support"
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
19 This support can also be built as a module. If so, the module
22 config SENSORS_ADM1021
23 tristate "Analog Devices ADM1021 and compatibles"
24 depends on HWMON && I2C
27 If you say yes here you get support for Analog Devices ADM1021
28 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
29 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
30 and the XEON processor built-in sensor.
32 This driver can also be built as a module. If so, the module
33 will be called adm1021.
35 config SENSORS_ADM1025
36 tristate "Analog Devices ADM1025 and compatibles"
37 depends on HWMON && I2C && EXPERIMENTAL
40 If you say yes here you get support for Analog Devices ADM1025
41 and Philips NE1619 sensor chips.
43 This driver can also be built as a module. If so, the module
44 will be called adm1025.
46 config SENSORS_ADM1026
47 tristate "Analog Devices ADM1026 and compatibles"
48 depends on HWMON && I2C && EXPERIMENTAL
51 If you say yes here you get support for Analog Devices ADM1026
54 This driver can also be built as a module. If so, the module
55 will be called adm1026.
57 config SENSORS_ADM1031
58 tristate "Analog Devices ADM1031 and compatibles"
59 depends on HWMON && I2C && EXPERIMENTAL
62 If you say yes here you get support for Analog Devices ADM1031
63 and ADM1030 sensor chips.
65 This driver can also be built as a module. If so, the module
66 will be called adm1031.
68 config SENSORS_ADM9240
69 tristate "Analog Devices ADM9240 and compatibles"
70 depends on HWMON && I2C && EXPERIMENTAL
73 If you say yes here you get support for Analog Devices ADM9240,
74 Dallas DS1780, National Semiconductor LM81 sensor chips.
76 This driver can also be built as a module. If so, the module
77 will be called adm9240.
80 tristate "Asus ASB100 Bach"
81 depends on HWMON && I2C && EXPERIMENTAL
84 If you say yes here you get support for the ASB100 Bach sensor
85 chip found on some Asus mainboards.
87 This driver can also be built as a module. If so, the module
88 will be called asb100.
91 tristate "Attansic ATXP1 VID controller"
92 depends on HWMON && I2C && EXPERIMENTAL
95 If you say yes here you get support for the Attansic ATXP1 VID
98 If your board have such a chip, you are able to control your CPU
99 core and other voltages.
101 This driver can also be built as a module. If so, the module
102 will be called atxp1.
104 config SENSORS_DS1621
105 tristate "Dallas Semiconductor DS1621 and DS1625"
106 depends on HWMON && I2C && EXPERIMENTAL
109 If you say yes here you get support for Dallas Semiconductor
110 DS1621 and DS1625 sensor chips.
112 This driver can also be built as a module. If so, the module
113 will be called ds1621.
115 config SENSORS_FSCHER
116 tristate "FSC Hermes"
117 depends on HWMON && I2C && EXPERIMENTAL
120 If you say yes here you get support for Fujitsu Siemens
121 Computers Hermes sensor chips.
123 This driver can also be built as a module. If so, the module
124 will be called fscher.
126 config SENSORS_FSCPOS
127 tristate "FSC Poseidon"
128 depends on HWMON && I2C && EXPERIMENTAL
131 If you say yes here you get support for Fujitsu Siemens
132 Computers Poseidon sensor chips.
134 This driver can also be built as a module. If so, the module
135 will be called fscpos.
137 config SENSORS_GL518SM
138 tristate "Genesys Logic GL518SM"
139 depends on HWMON && I2C
142 If you say yes here you get support for Genesys Logic GL518SM
145 This driver can also be built as a module. If so, the module
146 will be called gl518sm.
148 config SENSORS_GL520SM
149 tristate "Genesys Logic GL520SM"
150 depends on HWMON && I2C && EXPERIMENTAL
153 If you say yes here you get support for Genesys Logic GL520SM
156 This driver can also be built as a module. If so, the module
157 will be called gl520sm.
160 tristate "ITE IT87xx and compatibles"
161 depends on HWMON && I2C
164 If you say yes here you get support for ITE IT87xx sensor chips
167 This driver can also be built as a module. If so, the module
171 tristate "National Semiconductor LM63"
172 depends on HWMON && I2C && EXPERIMENTAL
175 If you say yes here you get support for the National Semiconductor
176 LM63 remote diode digital temperature sensor with integrated fan
177 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
178 motherboard, among others.
180 This driver can also be built as a module. If so, the module
184 tristate "National Semiconductor LM75 and compatibles"
185 depends on HWMON && I2C
188 If you say yes here you get support for National Semiconductor LM75
189 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
190 9-bit precision mode), and TelCom (now Microchip) TCN75.
192 The DS75 and DS1775 in 10- to 12-bit precision modes will require
193 a force module parameter. The driver will not handle the extra
196 This driver can also be built as a module. If so, the module
200 tristate "National Semiconductor LM77"
201 depends on HWMON && I2C && EXPERIMENTAL
204 If you say yes here you get support for National Semiconductor LM77
207 This driver can also be built as a module. If so, the module
211 tristate "National Semiconductor LM78 and compatibles"
212 depends on HWMON && I2C && EXPERIMENTAL
215 If you say yes here you get support for National Semiconductor LM78,
218 This driver can also be built as a module. If so, the module
222 tristate "National Semiconductor LM80"
223 depends on HWMON && I2C && EXPERIMENTAL
226 If you say yes here you get support for National Semiconductor
229 This driver can also be built as a module. If so, the module
233 tristate "National Semiconductor LM83"
234 depends on HWMON && I2C
237 If you say yes here you get support for National Semiconductor
240 This driver can also be built as a module. If so, the module
244 tristate "National Semiconductor LM85 and compatibles"
245 depends on HWMON && I2C && EXPERIMENTAL
248 If you say yes here you get support for National Semiconductor LM85
249 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
251 This driver can also be built as a module. If so, the module
255 tristate "National Semiconductor LM87"
256 depends on HWMON && I2C && EXPERIMENTAL
259 If you say yes here you get support for National Semiconductor LM87
262 This driver can also be built as a module. If so, the module
266 tristate "National Semiconductor LM90 and compatibles"
267 depends on HWMON && I2C
270 If you say yes here you get support for National Semiconductor LM90,
271 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
272 MAX6658 sensor chips.
274 The Analog Devices ADT7461 sensor chip is also supported, but only
275 if found in ADM1032 compatibility mode.
277 This driver can also be built as a module. If so, the module
281 tristate "National Semiconductor LM92 and compatibles"
282 depends on HWMON && I2C && EXPERIMENTAL
285 If you say yes here you get support for National Semiconductor LM92
286 and Maxim MAX6635 sensor chips.
288 This driver can also be built as a module. If so, the module
291 config SENSORS_MAX1619
292 tristate "Maxim MAX1619 sensor chip"
293 depends on HWMON && I2C && EXPERIMENTAL
296 If you say yes here you get support for MAX1619 sensor chip.
298 This driver can also be built as a module. If so, the module
299 will be called max1619.
301 config SENSORS_PC87360
302 tristate "National Semiconductor PC87360 family"
303 depends on HWMON && I2C && EXPERIMENTAL
307 If you say yes here you get access to the hardware monitoring
308 functions of the National Semiconductor PC8736x Super-I/O chips.
309 The PC87360, PC87363 and PC87364 only have fan monitoring and
310 control. The PC87365 and PC87366 additionally have voltage and
311 temperature monitoring.
313 This driver can also be built as a module. If so, the module
314 will be called pc87360.
316 config SENSORS_SIS5595
317 tristate "Silicon Integrated Systems Corp. SiS5595"
318 depends on HWMON && I2C && PCI && EXPERIMENTAL
322 If you say yes here you get support for the integrated sensors in
323 SiS5595 South Bridges.
325 This driver can also be built as a module. If so, the module
326 will be called sis5595.
328 config SENSORS_SMSC47M1
329 tristate "SMSC LPC47M10x and compatibles"
330 depends on HWMON && I2C && EXPERIMENTAL
334 If you say yes here you get support for the integrated fan
335 monitoring and control capabilities of the SMSC LPC47B27x,
336 LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
338 This driver can also be built as a module. If so, the module
339 will be called smsc47m1.
341 config SENSORS_SMSC47B397
342 tristate "SMSC LPC47B397-NC"
343 depends on HWMON && I2C && EXPERIMENTAL
347 If you say yes here you get support for the SMSC LPC47B397-NC
350 This driver can also be built as a module. If so, the module
351 will be called smsc47b397.
353 config SENSORS_VIA686A
355 depends on HWMON && I2C && PCI
359 If you say yes here you get support for the integrated sensors in
360 Via 686A/B South Bridges.
362 This driver can also be built as a module. If so, the module
363 will be called via686a.
365 config SENSORS_W83781D
366 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
367 depends on HWMON && I2C
370 If you say yes here you get support for the Winbond W8378x series
371 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
372 and the similar Asus AS99127F.
374 This driver can also be built as a module. If so, the module
375 will be called w83781d.
377 config SENSORS_W83L785TS
378 tristate "Winbond W83L785TS-S"
379 depends on HWMON && I2C && EXPERIMENTAL
382 If you say yes here you get support for the Winbond W83L785TS-S
383 sensor chip, which is used on the Asus A7N8X, among other
386 This driver can also be built as a module. If so, the module
387 will be called w83l785ts.
389 config SENSORS_W83627HF
390 tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
391 depends on HWMON && I2C && EXPERIMENTAL
395 If you say yes here you get support for the Winbond W836X7 series
396 of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
398 This driver can also be built as a module. If so, the module
399 will be called w83627hf.
401 config SENSORS_W83627EHF
402 tristate "Winbond W83627EHF"
403 depends on HWMON && I2C && EXPERIMENTAL
407 If you say yes here you get preliminary support for the hardware
408 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
409 Only fan and temperature inputs are supported at the moment, while
410 the chip does much more than that.
412 This driver also supports the W83627EHG, which is the lead-free
413 version of the W83627EHF.
415 This driver can also be built as a module. If so, the module
416 will be called w83627ehf.
418 config HWMON_DEBUG_CHIP
419 bool "Hardware Monitoring Chip debugging messages"
423 Say Y here if you want the I2C chip drivers to produce a bunch of
424 debug messages to the system log. Select this if you are having
425 a problem with I2C support and want to see more of what is going