err.no Git - linux-2.6/blob - drivers/char/rio/riocmd.c

   1 /*
   2 ** -----------------------------------------------------------------------------
   3 **
   4 **  Perle Specialix driver for Linux
   5 **  ported from the existing SCO driver source
   6 **
   7  *
   8  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  *      This program is distributed in the hope that it will be useful,
  16  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *      GNU General Public License for more details.
  19  *
  20  *      You should have received a copy of the GNU General Public License
  21  *      along with this program; if not, write to the Free Software
  22  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23 **
  24 **      Module          : riocmd.c
  25 **      SID             : 1.2
  26 **      Last Modified   : 11/6/98 10:33:41
  27 **      Retrieved       : 11/6/98 10:33:49
  28 **
  29 **  ident @(#)riocmd.c  1.2
  30 **
  31 ** -----------------------------------------------------------------------------
  32 */
  33 #ifdef SCCS_LABELS
  34 static char *_riocmd_c_sccs_ = "@(#)riocmd.c    1.2";
  35 #endif
  36
  37 #include <linux/module.h>
  38 #include <linux/slab.h>
  39 #include <linux/errno.h>
  40 #include <linux/tty.h>
  41 #include <asm/io.h>
  42 #include <asm/system.h>
  43 #include <asm/string.h>
  44 #include <asm/semaphore.h>
  45 #include <asm/uaccess.h>
  46
  47 #include <linux/termios.h>
  48 #include <linux/serial.h>
  49
  50 #include <linux/generic_serial.h>
  51
  52 #include "linux_compat.h"
  53 #include "rio_linux.h"
  54 #include "pkt.h"
  55 #include "daemon.h"
  56 #include "rio.h"
  57 #include "riospace.h"
  58 #include "cmdpkt.h"
  59 #include "map.h"
  60 #include "rup.h"
  61 #include "port.h"
  62 #include "riodrvr.h"
  63 #include "rioinfo.h"
  64 #include "func.h"
  65 #include "errors.h"
  66 #include "pci.h"
  67
  68 #include "parmmap.h"
  69 #include "unixrup.h"
  70 #include "board.h"
  71 #include "host.h"
  72 #include "phb.h"
  73 #include "link.h"
  74 #include "cmdblk.h"
  75 #include "route.h"
  76 #include "cirrus.h"
  77
  78
  79 static struct IdentifyRta IdRta;
  80 static struct KillNeighbour KillUnit;
  81
  82 int RIOFoadRta(struct Host *HostP, struct Map *MapP)
  83 {
  84         struct CmdBlk *CmdBlkP;
  85
  86         rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n");
  87
  88         CmdBlkP = RIOGetCmdBlk();
  89
  90         if (!CmdBlkP) {
  91                 rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n");
  92                 return -ENXIO;
  93         }
  94
  95         CmdBlkP->Packet.dest_unit = MapP->ID;
  96         CmdBlkP->Packet.dest_port = BOOT_RUP;
  97         CmdBlkP->Packet.src_unit = 0;
  98         CmdBlkP->Packet.src_port = BOOT_RUP;
  99         CmdBlkP->Packet.len = 0x84;
 100         CmdBlkP->Packet.data[0] = IFOAD;
 101         CmdBlkP->Packet.data[1] = 0;
 102         CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF;
 103         CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF;
 104
 105         if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
 106                 rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n");
 107                 return -EIO;
 108         }
 109         return 0;
 110 }
 111
 112 int RIOZombieRta(struct Host *HostP, struct Map *MapP)
 113 {
 114         struct CmdBlk *CmdBlkP;
 115
 116         rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n");
 117
 118         CmdBlkP = RIOGetCmdBlk();
 119
 120         if (!CmdBlkP) {
 121                 rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n");
 122                 return -ENXIO;
 123         }
 124
 125         CmdBlkP->Packet.dest_unit = MapP->ID;
 126         CmdBlkP->Packet.dest_port = BOOT_RUP;
 127         CmdBlkP->Packet.src_unit = 0;
 128         CmdBlkP->Packet.src_port = BOOT_RUP;
 129         CmdBlkP->Packet.len = 0x84;
 130         CmdBlkP->Packet.data[0] = ZOMBIE;
 131         CmdBlkP->Packet.data[1] = 0;
 132         CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF;
 133         CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF;
 134
 135         if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
 136                 rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n");
 137                 return -EIO;
 138         }
 139         return 0;
 140 }
 141
 142 int RIOCommandRta(struct rio_info *p, unsigned long RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP))
 143 {
 144         unsigned int Host;
 145
 146         rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%lx func %p\n", RtaUnique, func);
 147
 148         if (!RtaUnique)
 149                 return (0);
 150
 151         for (Host = 0; Host < p->RIONumHosts; Host++) {
 152                 unsigned int Rta;
 153                 struct Host *HostP = &p->RIOHosts[Host];
 154
 155                 for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
 156                         struct Map *MapP = &HostP->Mapping[Rta];
 157
 158                         if (MapP->RtaUniqueNum == RtaUnique) {
 159                                 uint Link;
 160
 161                                 /*
 162                                  ** now, lets just check we have a route to it...
 163                                  ** IF the routing stuff is working, then one of the
 164                                  ** topology entries for this unit will have a legit
 165                                  ** route *somewhere*. We care not where - if its got
 166                                  ** any connections, we can get to it.
 167                                  */
 168                                 for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
 169                                         if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) {
 170                                                 /*
 171                                                  ** Its worth trying the operation...
 172                                                  */
 173                                                 return (*func) (HostP, MapP);
 174                                         }
 175                                 }
 176                         }
 177                 }
 178         }
 179         return -ENXIO;
 180 }
 181
 182
 183 int RIOIdentifyRta(struct rio_info *p, void __user * arg)
 184 {
 185         unsigned int Host;
 186
 187         if (copy_from_user(&IdRta, arg, sizeof(IdRta))) {
 188                 rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n");
 189                 p->RIOError.Error = COPYIN_FAILED;
 190                 return -EFAULT;
 191         }
 192
 193         for (Host = 0; Host < p->RIONumHosts; Host++) {
 194                 unsigned int Rta;
 195                 struct Host *HostP = &p->RIOHosts[Host];
 196
 197                 for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
 198                         struct Map *MapP = &HostP->Mapping[Rta];
 199
 200                         if (MapP->RtaUniqueNum == IdRta.RtaUnique) {
 201                                 uint Link;
 202                                 /*
 203                                  ** now, lets just check we have a route to it...
 204                                  ** IF the routing stuff is working, then one of the
 205                                  ** topology entries for this unit will have a legit
 206                                  ** route *somewhere*. We care not where - if its got
 207                                  ** any connections, we can get to it.
 208                                  */
 209                                 for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
 210                                         if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) {
 211                                                 /*
 212                                                  ** Its worth trying the operation...
 213                                                  */
 214                                                 struct CmdBlk *CmdBlkP;
 215
 216                                                 rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n");
 217
 218                                                 CmdBlkP = RIOGetCmdBlk();
 219
 220                                                 if (!CmdBlkP) {
 221                                                         rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n");
 222                                                         return -ENXIO;
 223                                                 }
 224
 225                                                 CmdBlkP->Packet.dest_unit = MapP->ID;
 226                                                 CmdBlkP->Packet.dest_port = BOOT_RUP;
 227                                                 CmdBlkP->Packet.src_unit = 0;
 228                                                 CmdBlkP->Packet.src_port = BOOT_RUP;
 229                                                 CmdBlkP->Packet.len = 0x84;
 230                                                 CmdBlkP->Packet.data[0] = IDENTIFY;
 231                                                 CmdBlkP->Packet.data[1] = 0;
 232                                                 CmdBlkP->Packet.data[2] = IdRta.ID;
 233
 234                                                 if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
 235                                                         rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n");
 236                                                         return -EIO;
 237                                                 }
 238                                                 return 0;
 239                                         }
 240                                 }
 241                         }
 242                 }
 243         }
 244         return -ENOENT;
 245 }
 246
 247
 248 int RIOKillNeighbour(struct rio_info *p, void __user * arg)
 249 {
 250         uint Host;
 251         uint ID;
 252         struct Host *HostP;
 253         struct CmdBlk *CmdBlkP;
 254
 255         rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n");
 256
 257         if (copy_from_user(&KillUnit, arg, sizeof(KillUnit))) {
 258                 rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n");
 259                 p->RIOError.Error = COPYIN_FAILED;
 260                 return -EFAULT;
 261         }
 262
 263         if (KillUnit.Link > 3)
 264                 return -ENXIO;
 265
 266         CmdBlkP = RIOGetCmdBlk();
 267
 268         if (!CmdBlkP) {
 269                 rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n");
 270                 return -ENXIO;
 271         }
 272
 273         CmdBlkP->Packet.dest_unit = 0;
 274         CmdBlkP->Packet.src_unit = 0;
 275         CmdBlkP->Packet.dest_port = BOOT_RUP;
 276         CmdBlkP->Packet.src_port = BOOT_RUP;
 277         CmdBlkP->Packet.len = 0x84;
 278         CmdBlkP->Packet.data[0] = UFOAD;
 279         CmdBlkP->Packet.data[1] = KillUnit.Link;
 280         CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF;
 281         CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF;
 282
 283         for (Host = 0; Host < p->RIONumHosts; Host++) {
 284                 ID = 0;
 285                 HostP = &p->RIOHosts[Host];
 286
 287                 if (HostP->UniqueNum == KillUnit.UniqueNum) {
 288                         if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) {
 289                                 rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
 290                                 return -EIO;
 291                         }
 292                         return 0;
 293                 }
 294
 295                 for (ID = 0; ID < RTAS_PER_HOST; ID++) {
 296                         if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) {
 297                                 CmdBlkP->Packet.dest_unit = ID + 1;
 298                                 if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) {
 299                                         rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
 300                                         return -EIO;
 301                                 }
 302                                 return 0;
 303                         }
 304                 }
 305         }
 306         RIOFreeCmdBlk(CmdBlkP);
 307         return -ENXIO;
 308 }
 309
 310 int RIOSuspendBootRta(struct Host *HostP, int ID, int Link)
 311 {
 312         struct CmdBlk *CmdBlkP;
 313
 314         rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link);
 315
 316         CmdBlkP = RIOGetCmdBlk();
 317
 318         if (!CmdBlkP) {
 319                 rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n");
 320                 return -ENXIO;
 321         }
 322
 323         CmdBlkP->Packet.dest_unit = ID;
 324         CmdBlkP->Packet.dest_port = BOOT_RUP;
 325         CmdBlkP->Packet.src_unit = 0;
 326         CmdBlkP->Packet.src_port = BOOT_RUP;
 327         CmdBlkP->Packet.len = 0x84;
 328         CmdBlkP->Packet.data[0] = IWAIT;
 329         CmdBlkP->Packet.data[1] = Link;
 330         CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF;
 331         CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF;
 332
 333         if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) {
 334                 rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n");
 335                 return -EIO;
 336         }
 337         return 0;
 338 }
 339
 340 int RIOFoadWakeup(struct rio_info *p)
 341 {
 342         int port;
 343         struct Port *PortP;
 344         unsigned long flags;
 345
 346         for (port = 0; port < RIO_PORTS; port++) {
 347                 PortP = p->RIOPortp[port];
 348
 349                 rio_spin_lock_irqsave(&PortP->portSem, flags);
 350                 PortP->Config = 0;
 351                 PortP->State = 0;
 352                 PortP->InUse = NOT_INUSE;
 353                 PortP->PortState = 0;
 354                 PortP->FlushCmdBodge = 0;
 355                 PortP->ModemLines = 0;
 356                 PortP->ModemState = 0;
 357                 PortP->CookMode = 0;
 358                 PortP->ParamSem = 0;
 359                 PortP->Mapped = 0;
 360                 PortP->WflushFlag = 0;
 361                 PortP->MagicFlags = 0;
 362                 PortP->RxDataStart = 0;
 363                 PortP->TxBufferIn = 0;
 364                 PortP->TxBufferOut = 0;
 365                 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 366         }
 367         return (0);
 368 }
 369
 370 /*
 371 ** Incoming command on the COMMAND_RUP to be processed.
 372 */
 373 static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struct PKT __iomem *PacketP)
 374 {
 375         struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *)PacketP->data;
 376         struct Port *PortP;
 377         struct UnixRup *UnixRupP;
 378         unsigned short SysPort;
 379         unsigned short ReportedModemStatus;
 380         unsigned short rup;
 381         unsigned short subCommand;
 382         unsigned long flags;
 383
 384         func_enter();
 385
 386         /*
 387          ** 16 port RTA note:
 388          ** Command rup packets coming from the RTA will have pkt->data[1] (which
 389          ** translates to PktCmdP->PhbNum) set to the host port number for the
 390          ** particular unit. To access the correct BaseSysPort for a 16 port RTA,
 391          ** we can use PhbNum to get the rup number for the appropriate 8 port
 392          ** block (for the first block, this should be equal to 'Rup').
 393          */
 394         rup = readb(&PktCmdP->PhbNum) / (unsigned short) PORTS_PER_RTA;
 395         UnixRupP = &HostP->UnixRups[rup];
 396         SysPort = UnixRupP->BaseSysPort + (readb(&PktCmdP->PhbNum) % (unsigned short) PORTS_PER_RTA);
 397         rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort);
 398
 399         if (UnixRupP->BaseSysPort == NO_PORT) {
 400                 rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n");
 401                 rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n");
 402                 rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name);
 403                 rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number  0x%x\n", rup);
 404
 405                 if (Rup < (unsigned short) MAX_RUP) {
 406                         rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name);
 407                 } else
 408                         rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name);
 409
 410                 rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", readb(&PacketP->dest_unit), readb(&PacketP->dest_port));
 411                 rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source    0x%x:0x%x\n", readb(&PacketP->src_unit), readb(&PacketP->src_port));
 412                 rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length    0x%x (%d)\n", readb(&PacketP->len), readb(&PacketP->len));
 413                 rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control  0x%x (%d)\n", readb(&PacketP->control), readb(&PacketP->control));
 414                 rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check      0x%x (%d)\n", readw(&PacketP->csum), readw(&PacketP->csum));
 415                 rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", readb(&PktCmdP->PhbNum), readb(&PktCmdP->Command));
 416                 return 1;
 417         }
 418         PortP = p->RIOPortp[SysPort];
 419         rio_spin_lock_irqsave(&PortP->portSem, flags);
 420         switch (readb(&PktCmdP->Command)) {
 421         case BREAK_RECEIVED:
 422                 rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n");
 423                 /* If the current line disc. is not multi-threading and
 424                    the current processor is not the default, reset rup_intr
 425                    and return 0 to ensure that the command packet is
 426                    not freed. */
 427                 /* Call tmgr HANGUP HERE */
 428                 /* Fix this later when every thing works !!!! RAMRAJ */
 429                 gs_got_break(&PortP->gs);
 430                 break;
 431
 432         case COMPLETE:
 433                 rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts);
 434                 subCommand = 1;
 435                 switch (readb(&PktCmdP->SubCommand)) {
 436                 case MEMDUMP:
 437                         rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr));
 438                         break;
 439                 case READ_REGISTER:
 440                         rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr));
 441                         p->CdRegister = (readb(&PktCmdP->ModemStatus) & MSVR1_HOST);
 442                         break;
 443                 default:
 444                         subCommand = 0;
 445                         break;
 446                 }
 447                 if (subCommand)
 448                         break;
 449                 rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", readb(&PktCmdP->PortStatus), PortP->PortState);
 450                 if (PortP->PortState != readb(&PktCmdP->PortStatus)) {
 451                         rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n");
 452                         PortP->PortState = readb(&PktCmdP->PortStatus);
 453                         /* What should we do here ...
 454                            wakeup( &PortP->PortState );
 455                          */
 456                 } else
 457                         rio_dprintk(RIO_DEBUG_CMD, "No change\n");
 458
 459                 /* FALLTHROUGH */
 460         case MODEM_STATUS:
 461                 /*
 462                  ** Knock out the tbusy and tstop bits, as these are not relevant
 463                  ** to the check for modem status change (they're just there because
 464                  ** it's a convenient place to put them!).
 465                  */
 466                 ReportedModemStatus = readb(&PktCmdP->ModemStatus);
 467                 if ((PortP->ModemState & MSVR1_HOST) == (ReportedModemStatus & MSVR1_HOST)) {
 468                         rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState);
 469                         /*
 470                          ** Update ModemState just in case tbusy or tstop states have
 471                          ** changed.
 472                          */
 473                         PortP->ModemState = ReportedModemStatus;
 474                 } else {
 475                         rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus);
 476                         PortP->ModemState = ReportedModemStatus;
 477 #ifdef MODEM_SUPPORT
 478                         if (PortP->Mapped) {
 479                                 /***********************************************************\
 480                                 *************************************************************
 481                                 ***                                                                                                        ***
 482                                 ***               M O D E M   S T A T E   C H A N G E             ***
 483                                 ***                                                                                                        ***
 484                                 *************************************************************
 485                                 \***********************************************************/
 486                                 /*
 487                                  ** If the device is a modem, then check the modem
 488                                  ** carrier.
 489                                  */
 490                                 if (PortP->gs.tty == NULL)
 491                                         break;
 492                                 if (PortP->gs.tty->termios == NULL)
 493                                         break;
 494
 495                                 if (!(PortP->gs.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) {
 496
 497                                         rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n");
 498                                         /*
 499                                          ** Is there a carrier?
 500                                          */
 501                                         if (PortP->ModemState & MSVR1_CD) {
 502                                                 /*
 503                                                  ** Has carrier just appeared?
 504                                                  */
 505                                                 if (!(PortP->State & RIO_CARR_ON)) {
 506                                                         rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n");
 507                                                         PortP->State |= RIO_CARR_ON;
 508                                                         /*
 509                                                          ** wakeup anyone in WOPEN
 510                                                          */
 511                                                         if (PortP->State & (PORT_ISOPEN | RIO_WOPEN))
 512                                                                 wake_up_interruptible(&PortP->gs.open_wait);
 513                                                 }
 514                                         } else {
 515                                                 /*
 516                                                  ** Has carrier just dropped?
 517                                                  */
 518                                                 if (PortP->State & RIO_CARR_ON) {
 519                                                         if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN))
 520                                                                 tty_hangup(PortP->gs.tty);
 521                                                         PortP->State &= ~RIO_CARR_ON;
 522                                                         rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n");
 523                                                 }
 524                                         }
 525                                 }
 526                         }
 527 #endif
 528                 }
 529                 break;
 530
 531         default:
 532                 rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %Zd\n", readb(&PktCmdP->Command), HostP - p->RIOHosts);
 533                 break;
 534         }
 535         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 536
 537         func_exit();
 538
 539         return 1;
 540 }
 541
 542 /*
 543 ** The command mechanism:
 544 **      Each rup has a chain of commands associated with it.
 545 **      This chain is maintained by routines in this file.
 546 **      Periodically we are called and we run a quick check of all the
 547 **      active chains to determine if there is a command to be executed,
 548 **      and if the rup is ready to accept it.
 549 **
 550 */
 551
 552 /*
 553 ** Allocate an empty command block.
 554 */
 555 struct CmdBlk *RIOGetCmdBlk(void)
 556 {
 557         struct CmdBlk *CmdBlkP;
 558
 559         CmdBlkP = kmalloc(sizeof(struct CmdBlk), GFP_ATOMIC);
 560         if (CmdBlkP)
 561                 memset(CmdBlkP, 0, sizeof(struct CmdBlk));
 562         return CmdBlkP;
 563 }
 564
 565 /*
 566 ** Return a block to the head of the free list.
 567 */
 568 void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP)
 569 {
 570         kfree(CmdBlkP);
 571 }
 572
 573 /*
 574 ** attach a command block to the list of commands to be performed for
 575 ** a given rup.
 576 */
 577 int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
 578 {
 579         struct CmdBlk **Base;
 580         struct UnixRup *UnixRupP;
 581         unsigned long flags;
 582
 583         if (Rup >= (unsigned short) (MAX_RUP + LINKS_PER_UNIT)) {
 584                 rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup);
 585                 RIOFreeCmdBlk(CmdBlkP);
 586                 return RIO_FAIL;
 587         }
 588
 589         UnixRupP = &HostP->UnixRups[Rup];
 590
 591         rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 592
 593         /*
 594          ** If the RUP is currently inactive, then put the request
 595          ** straight on the RUP....
 596          */
 597         if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP)
 598                                                                                                                                              : 1)) {
 599                 rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]);
 600
 601                 /*
 602                  ** Whammy! blat that pack!
 603                  */
 604                 HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT));
 605
 606                 /*
 607                  ** place command packet on the pending position.
 608                  */
 609                 UnixRupP->CmdPendingP = CmdBlkP;
 610
 611                 /*
 612                  ** set the command register
 613                  */
 614                 writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol);
 615
 616                 rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 617
 618                 return 0;
 619         }
 620         rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n");
 621
 622         if (UnixRupP->CmdsWaitingP != NULL)
 623                 rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n");
 624         if (UnixRupP->CmdPendingP != NULL)
 625                 rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n");
 626         if (readw(&UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE)
 627                 rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n");
 628
 629         Base = &UnixRupP->CmdsWaitingP;
 630
 631         rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk %p at %p\n", CmdBlkP, Base);
 632
 633         while (*Base) {
 634                 rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk %p here\n", *Base);
 635                 Base = &((*Base)->NextP);
 636                 rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk %p at %p\n", CmdBlkP, Base);
 637         }
 638
 639         rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk %p at %p\n", CmdBlkP, Base);
 640
 641         *Base = CmdBlkP;
 642
 643         CmdBlkP->NextP = NULL;
 644
 645         rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 646
 647         return 0;
 648 }
 649
 650 /*
 651 ** Here we go - if there is an empty rup, fill it!
 652 ** must be called at splrio() or higher.
 653 */
 654 void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
 655 {
 656         struct CmdBlk *CmdBlkP;
 657         struct UnixRup *UnixRupP;
 658         struct PKT __iomem *PacketP;
 659         unsigned short Rup;
 660         unsigned long flags;
 661
 662
 663         Rup = MAX_RUP + LINKS_PER_UNIT;
 664
 665         do {                    /* do this loop for each RUP */
 666                 /*
 667                  ** locate the rup we are processing & lock it
 668                  */
 669                 UnixRupP = &HostP->UnixRups[--Rup];
 670
 671                 spin_lock_irqsave(&UnixRupP->RupLock, flags);
 672
 673                 /*
 674                  ** First check for incoming commands:
 675                  */
 676                 if (readw(&UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) {
 677                         int FreeMe;
 678
 679                         PacketP = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->rxpkt));
 680
 681                         switch (readb(&PacketP->dest_port)) {
 682                         case BOOT_RUP:
 683                                 rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", readb(&PacketP->len) & 0x80 ? "Command" : "Data", readb(&PacketP->data[0]));
 684                                 rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 685                                 FreeMe = RIOBootRup(p, Rup, HostP, PacketP);
 686                                 rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 687                                 break;
 688
 689                         case COMMAND_RUP:
 690                                 /*
 691                                  ** Free the RUP lock as loss of carrier causes a
 692                                  ** ttyflush which will (eventually) call another
 693                                  ** routine that uses the RUP lock.
 694                                  */
 695                                 rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 696                                 FreeMe = RIOCommandRup(p, Rup, HostP, PacketP);
 697                                 if (readb(&PacketP->data[5]) == MEMDUMP) {
 698                                         rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6])));
 699                                         rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32);
 700                                 }
 701                                 rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 702                                 break;
 703
 704                         case ROUTE_RUP:
 705                                 rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 706                                 FreeMe = RIORouteRup(p, Rup, HostP, PacketP);
 707                                 rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 708                                 break;
 709
 710                         default:
 711                                 rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", readb(&PacketP->dest_port));
 712                                 FreeMe = 1;
 713                                 break;
 714                         }
 715
 716                         if (FreeMe) {
 717                                 rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n");
 718                                 put_free_end(HostP, PacketP);
 719
 720                                 writew(RX_RUP_INACTIVE, &UnixRupP->RupP->rxcontrol);
 721
 722                                 if (readw(&UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) {
 723                                         rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup);
 724                                         writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &UnixRupP->RupP->handshake);
 725                                 }
 726                         }
 727                 }
 728
 729                 /*
 730                  ** IF a command was running on the port,
 731                  ** and it has completed, then tidy it up.
 732                  */
 733                 if ((CmdBlkP = UnixRupP->CmdPendingP) &&        /* ASSIGN! */
 734                     (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
 735                         /*
 736                          ** we are idle.
 737                          ** there is a command in pending.
 738                          ** Therefore, this command has finished.
 739                          ** So, wakeup whoever is waiting for it (and tell them
 740                          ** what happened).
 741                          */
 742                         if (CmdBlkP->Packet.dest_port == BOOT_RUP)
 743                                 rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]);
 744
 745                         rio_dprintk(RIO_DEBUG_CMD, "Command %p completed\n", CmdBlkP);
 746
 747                         /*
 748                          ** Clear the Rup lock to prevent mutual exclusion.
 749                          */
 750                         if (CmdBlkP->PostFuncP) {
 751                                 rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 752                                 (*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP);
 753                                 rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 754                         }
 755
 756                         /*
 757                          ** ....clear the pending flag....
 758                          */
 759                         UnixRupP->CmdPendingP = NULL;
 760
 761                         /*
 762                          ** ....and return the command block to the freelist.
 763                          */
 764                         RIOFreeCmdBlk(CmdBlkP);
 765                 }
 766
 767                 /*
 768                  ** If there is a command for this rup, and the rup
 769                  ** is idle, then process the command
 770                  */
 771                 if ((CmdBlkP = UnixRupP->CmdsWaitingP) &&       /* ASSIGN! */
 772                     (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
 773                         /*
 774                          ** if the pre-function is non-zero, call it.
 775                          ** If it returns RIO_FAIL then don't
 776                          ** send this command yet!
 777                          */
 778                         if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : 1)) {
 779                                 rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command %p\n", CmdBlkP);
 780                         } else {
 781                                 rio_dprintk(RIO_DEBUG_CMD, "Start new command %p Cmd byte is 0x%x\n", CmdBlkP, CmdBlkP->Packet.data[0]);
 782                                 /*
 783                                  ** Whammy! blat that pack!
 784                                  */
 785                                 HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT));
 786
 787                                 /*
 788                                  ** remove the command from the rup command queue...
 789                                  */
 790                                 UnixRupP->CmdsWaitingP = CmdBlkP->NextP;
 791
 792                                 /*
 793                                  ** ...and place it on the pending position.
 794                                  */
 795                                 UnixRupP->CmdPendingP = CmdBlkP;
 796
 797                                 /*
 798                                  ** set the command register
 799                                  */
 800                                 writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol);
 801
 802                                 /*
 803                                  ** the command block will be freed
 804                                  ** when the command has been processed.
 805                                  */
 806                         }
 807                 }
 808                 spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 809         } while (Rup);
 810 }
 811
 812 int RIOWFlushMark(unsigned long iPortP, struct CmdBlk *CmdBlkP)
 813 {
 814         struct Port *PortP = (struct Port *) iPortP;
 815         unsigned long flags;
 816
 817         rio_spin_lock_irqsave(&PortP->portSem, flags);
 818         PortP->WflushFlag++;
 819         PortP->MagicFlags |= MAGIC_FLUSH;
 820         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 821         return RIOUnUse(iPortP, CmdBlkP);
 822 }
 823
 824 int RIORFlushEnable(unsigned long iPortP, struct CmdBlk *CmdBlkP)
 825 {
 826         struct Port *PortP = (struct Port *) iPortP;
 827         struct PKT __iomem *PacketP;
 828         unsigned long flags;
 829
 830         rio_spin_lock_irqsave(&PortP->portSem, flags);
 831
 832         while (can_remove_receive(&PacketP, PortP)) {
 833                 remove_receive(PortP);
 834                 put_free_end(PortP->HostP, PacketP);
 835         }
 836
 837         if (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) {
 838                 /*
 839                  ** MAGIC! (Basically, handshake the RX buffer, so that
 840                  ** the RTAs upstream can be re-enabled.)
 841                  */
 842                 rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n");
 843                 writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake);
 844         }
 845         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 846         return RIOUnUse(iPortP, CmdBlkP);
 847 }
 848
 849 int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP)
 850 {
 851         struct Port *PortP = (struct Port *) iPortP;
 852         unsigned long flags;
 853
 854         rio_spin_lock_irqsave(&PortP->portSem, flags);
 855
 856         rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n");
 857
 858         if (PortP->InUse) {
 859                 if (--PortP->InUse != NOT_INUSE) {
 860                         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 861                         return 0;
 862                 }
 863         }
 864         /*
 865          ** While PortP->InUse is set (i.e. a preemptive command has been sent to
 866          ** the RTA and is awaiting completion), any transmit data is prevented from
 867          ** being transferred from the write queue into the transmit packets
 868          ** (add_transmit) and no furthur transmit interrupt will be sent for that
 869          ** data. The next interrupt will occur up to 500ms later (RIOIntr is called
 870          ** twice a second as a saftey measure). This was the case when kermit was
 871          ** used to send data into a RIO port. After each packet was sent, TCFLSH
 872          ** was called to flush the read queue preemptively. PortP->InUse was
 873          ** incremented, thereby blocking the 6 byte acknowledgement packet
 874          ** transmitted back. This acknowledgment hung around for 500ms before
 875          ** being sent, thus reducing input performance substantially!.
 876          ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data
 877          ** hanging around in the transmit buffer is sent immediately.
 878          */
 879         writew(1, &PortP->HostP->ParmMapP->tx_intr);
 880         /* What to do here ..
 881            wakeup( (caddr_t)&(PortP->InUse) );
 882          */
 883         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 884         return 0;
 885 }
 886
 887 /*
 888 **
 889 ** How to use this file:
 890 **
 891 ** To send a command down a rup, you need to allocate a command block, fill
 892 ** in the packet information, fill in the command number, fill in the pre-
 893 ** and post- functions and arguments, and then add the command block to the
 894 ** queue of command blocks for the port in question. When the port is idle,
 895 ** then the pre-function will be called. If this returns RIO_FAIL then the
 896 ** command will be re-queued and tried again at a later date (probably in one
 897 ** clock tick). If the pre-function returns NOT RIO_FAIL, then the command
 898 ** packet will be queued on the RUP, and the txcontrol field set to the
 899 ** command number. When the txcontrol field has changed from being the
 900 ** command number, then the post-function will be called, with the argument
 901 ** specified earlier, a pointer to the command block, and the value of
 902 ** txcontrol.
 903 **
 904 ** To allocate a command block, call RIOGetCmdBlk(). This returns a pointer
 905 ** to the command block structure allocated, or NULL if there aren't any.
 906 ** The block will have been zeroed for you.
 907 **
 908 ** The structure has the following fields:
 909 **
 910 ** struct CmdBlk
 911 ** {
 912 **       struct CmdBlk *NextP;            ** Pointer to next command block   **
 913 **       struct PKT      Packet;                ** A packet, to copy to the rup **
 914 **                      int      (*PreFuncP)();  ** The func to call to check if OK **
 915 **                      int      PreArg;                ** The arg for the func                 **
 916 **                      int      (*PostFuncP)(); ** The func to call when completed **
 917 **                      int      PostArg;          ** The arg for the func                      **
 918 ** };
 919 **
 920 ** You need to fill in ALL fields EXCEPT NextP, which is used to link the
 921 ** blocks together either on the free list or on the Rup list.
 922 **
 923 ** Packet is an actual packet structure to be filled in with the packet
 924 ** information associated with the command. You need to fill in everything,
 925 ** as the command processor doesn't process the command packet in any way.
 926 **
 927 ** The PreFuncP is called before the packet is enqueued on the host rup.
 928 ** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must
 929 ** return !RIO_FAIL to have the packet queued on the rup, and RIO_FAIL
 930 ** if the packet is NOT to be queued.
 931 **
 932 ** The PostFuncP is called when the command has completed. It is called
 933 ** as (*PostFuncP)(PostArg, CmdBlkP, txcontrol);. PostFuncP is not expected
 934 ** to return a value. PostFuncP does NOT need to free the command block,
 935 ** as this happens automatically after PostFuncP returns.
 936 **
 937 ** Once the command block has been filled in, it is attached to the correct
 938 ** queue by calling RIOQueueCmdBlk( HostP, Rup, CmdBlkP ) where HostP is
 939 ** a pointer to the struct Host, Rup is the NUMBER of the rup (NOT a pointer
 940 ** to it!), and CmdBlkP is the pointer to the command block allocated using
 941 ** RIOGetCmdBlk().
 942 **
 943 */