1 /* generic HDLC line discipline for Linux
3 * Written by Paul Fulghum paulkf@microgate.com
4 * for Microgate Corporation
6 * Microgate and SyncLink are registered trademarks of Microgate Corporation
8 * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9 * Al Longyear <longyear@netcom.com>,
10 * Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
12 * Original release 01/11/99
13 * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $
15 * This code is released under the GNU General Public License (GPL)
17 * This module implements the tty line discipline N_HDLC for use with
18 * tty device drivers that support bit-synchronous HDLC communications.
20 * All HDLC data is frame oriented which means:
22 * 1. tty write calls represent one complete transmit frame of data
23 * The device driver should accept the complete frame or none of
24 * the frame (busy) in the write method. Each write call should have
25 * a byte count in the range of 2-65535 bytes (2 is min HDLC frame
26 * with 1 addr byte and 1 ctrl byte). The max byte count of 65535
27 * should include any crc bytes required. For example, when using
28 * CCITT CRC32, 4 crc bytes are required, so the maximum size frame
29 * the application may transmit is limited to 65531 bytes. For CCITT
30 * CRC16, the maximum application frame size would be 65533.
33 * 2. receive callbacks from the device driver represents
34 * one received frame. The device driver should bypass
35 * the tty flip buffer and call the line discipline receive
36 * callback directly to avoid fragmenting or concatenating
37 * multiple frames into a single receive callback.
39 * The HDLC line discipline queues the receive frames in separate
40 * buffers so complete receive frames can be returned by the
43 * 3. tty read calls returns an entire frame of data or nothing.
45 * 4. all send and receive data is considered raw. No processing
46 * or translation is performed by the line discipline, regardless
49 * 5. When line discipline is queried for the amount of receive
50 * data available (FIOC), 0 is returned if no data available,
51 * otherwise the count of the next available frame is returned.
52 * (instead of the sum of all received frame counts).
54 * These conventions allow the standard tty programming interface
55 * to be used for synchronous HDLC applications when used with
56 * this line discipline (or another line discipline that is frame
57 * oriented such as N_PPP).
59 * The SyncLink driver (synclink.c) implements both asynchronous
60 * (using standard line discipline N_TTY) and synchronous HDLC
61 * (using N_HDLC) communications, with the latter using the above
64 * This implementation is very basic and does not maintain
65 * any statistics. The main point is to enforce the raw data
66 * and frame orientation of HDLC communications.
68 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
69 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
70 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
71 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
72 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
73 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
74 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
75 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
76 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
77 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
78 * OF THE POSSIBILITY OF SUCH DAMAGE.
81 #define HDLC_MAGIC 0x239e
82 #define HDLC_VERSION "$Revision: 4.8 $"
84 #include <linux/module.h>
85 #include <linux/init.h>
86 #include <linux/kernel.h>
87 #include <linux/sched.h>
88 #include <linux/types.h>
89 #include <linux/fcntl.h>
90 #include <linux/interrupt.h>
91 #include <linux/ptrace.h>
94 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
96 #include <linux/poll.h>
98 #include <linux/ioctl.h>
99 #include <linux/slab.h>
100 #include <linux/tty.h>
101 #include <linux/errno.h>
102 #include <linux/string.h> /* used in new tty drivers */
103 #include <linux/signal.h> /* used in new tty drivers */
104 #include <linux/if.h>
105 #include <linux/bitops.h>
107 #include <asm/system.h>
108 #include <asm/termios.h>
109 #include <asm/uaccess.h>
112 * Buffers for individual HDLC frames
114 #define MAX_HDLC_FRAME_SIZE 65535
115 #define DEFAULT_RX_BUF_COUNT 10
116 #define MAX_RX_BUF_COUNT 60
117 #define DEFAULT_TX_BUF_COUNT 1
120 struct n_hdlc_buf *link;
125 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
127 struct n_hdlc_buf_list {
128 struct n_hdlc_buf *head;
129 struct n_hdlc_buf *tail;
135 * struct n_hdlc - per device instance data structure
136 * @magic - magic value for structure
137 * @flags - miscellaneous control flags
138 * @tty - ptr to TTY structure
139 * @backup_tty - TTY to use if tty gets closed
140 * @tbusy - reentrancy flag for tx wakeup code
141 * @woke_up - FIXME: describe this field
142 * @tbuf - currently transmitting tx buffer
143 * @tx_buf_list - list of pending transmit frame buffers
144 * @rx_buf_list - list of received frame buffers
145 * @tx_free_buf_list - list unused transmit frame buffers
146 * @rx_free_buf_list - list unused received frame buffers
151 struct tty_struct *tty;
152 struct tty_struct *backup_tty;
155 struct n_hdlc_buf *tbuf;
156 struct n_hdlc_buf_list tx_buf_list;
157 struct n_hdlc_buf_list rx_buf_list;
158 struct n_hdlc_buf_list tx_free_buf_list;
159 struct n_hdlc_buf_list rx_free_buf_list;
163 * HDLC buffer list manipulation functions
165 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
166 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
167 struct n_hdlc_buf *buf);
168 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
170 /* Local functions */
172 static struct n_hdlc *n_hdlc_alloc (void);
174 /* debug level can be set by insmod for debugging purposes */
175 #define DEBUG_LEVEL_INFO 1
176 static int debuglevel;
178 /* max frame size for memory allocations */
179 static int maxframe = 4096;
183 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
184 __u8 __user *buf, size_t nr);
185 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
186 const unsigned char *buf, size_t nr);
187 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
188 unsigned int cmd, unsigned long arg);
189 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
191 static int n_hdlc_tty_open(struct tty_struct *tty);
192 static void n_hdlc_tty_close(struct tty_struct *tty);
193 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
194 char *fp, int count);
195 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
197 #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
199 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
200 #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty)
202 static struct tty_ldisc n_hdlc_ldisc = {
203 .owner = THIS_MODULE,
204 .magic = TTY_LDISC_MAGIC,
206 .open = n_hdlc_tty_open,
207 .close = n_hdlc_tty_close,
208 .read = n_hdlc_tty_read,
209 .write = n_hdlc_tty_write,
210 .ioctl = n_hdlc_tty_ioctl,
211 .poll = n_hdlc_tty_poll,
212 .receive_buf = n_hdlc_tty_receive,
213 .write_wakeup = n_hdlc_tty_wakeup,
217 * n_hdlc_release - release an n_hdlc per device line discipline info structure
218 * @n_hdlc - per device line discipline info structure
220 static void n_hdlc_release(struct n_hdlc *n_hdlc)
222 struct tty_struct *tty = n_hdlc2tty (n_hdlc);
223 struct n_hdlc_buf *buf;
225 if (debuglevel >= DEBUG_LEVEL_INFO)
226 printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
228 /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
229 wake_up_interruptible (&tty->read_wait);
230 wake_up_interruptible (&tty->write_wait);
232 if (tty->disc_data == n_hdlc)
233 tty->disc_data = NULL; /* Break the tty->n_hdlc link */
235 /* Release transmit and receive buffers */
237 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
244 buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
251 buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
258 buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
267 } /* end of n_hdlc_release() */
270 * n_hdlc_tty_close - line discipline close
271 * @tty - pointer to tty info structure
273 * Called when the line discipline is changed to something
274 * else, the tty is closed, or the tty detects a hangup.
276 static void n_hdlc_tty_close(struct tty_struct *tty)
278 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
280 if (debuglevel >= DEBUG_LEVEL_INFO)
281 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
283 if (n_hdlc != NULL) {
284 if (n_hdlc->magic != HDLC_MAGIC) {
285 printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
288 #if defined(TTY_NO_WRITE_SPLIT)
289 clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
291 tty->disc_data = NULL;
292 if (tty == n_hdlc->backup_tty)
293 n_hdlc->backup_tty = NULL;
294 if (tty != n_hdlc->tty)
296 if (n_hdlc->backup_tty) {
297 n_hdlc->tty = n_hdlc->backup_tty;
299 n_hdlc_release (n_hdlc);
303 if (debuglevel >= DEBUG_LEVEL_INFO)
304 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
306 } /* end of n_hdlc_tty_close() */
309 * n_hdlc_tty_open - called when line discipline changed to n_hdlc
310 * @tty - pointer to tty info structure
312 * Returns 0 if success, otherwise error code
314 static int n_hdlc_tty_open (struct tty_struct *tty)
316 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
318 if (debuglevel >= DEBUG_LEVEL_INFO)
319 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
323 /* There should not be an existing table for this slot. */
325 printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
329 n_hdlc = n_hdlc_alloc();
331 printk (KERN_ERR "n_hdlc_alloc failed\n");
335 tty->disc_data = n_hdlc;
337 tty->receive_room = 65536;
339 #if defined(TTY_NO_WRITE_SPLIT)
340 /* change tty_io write() to not split large writes into 8K chunks */
341 set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
344 /* Flush any pending characters in the driver and discipline. */
345 if (tty->ldisc.flush_buffer)
346 tty->ldisc.flush_buffer(tty);
348 tty_driver_flush_buffer(tty);
350 if (debuglevel >= DEBUG_LEVEL_INFO)
351 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
355 } /* end of n_tty_hdlc_open() */
358 * n_hdlc_send_frames - send frames on pending send buffer list
359 * @n_hdlc - pointer to ldisc instance data
360 * @tty - pointer to tty instance data
362 * Send frames on pending send buffer list until the driver does not accept a
363 * frame (busy) this function is called after adding a frame to the send buffer
364 * list and by the tty wakeup callback.
366 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
370 struct n_hdlc_buf *tbuf;
372 if (debuglevel >= DEBUG_LEVEL_INFO)
373 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
376 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
379 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
384 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
386 /* get current transmit buffer or get new transmit */
387 /* buffer from list of pending transmit buffers */
391 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
394 if (debuglevel >= DEBUG_LEVEL_INFO)
395 printk("%s(%d)sending frame %p, count=%d\n",
396 __FILE__,__LINE__,tbuf,tbuf->count);
398 /* Send the next block of data to device */
399 tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
400 actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
402 /* rollback was possible and has been done */
403 if (actual == -ERESTARTSYS) {
407 /* if transmit error, throw frame away by */
408 /* pretending it was accepted by driver */
410 actual = tbuf->count;
412 if (actual == tbuf->count) {
413 if (debuglevel >= DEBUG_LEVEL_INFO)
414 printk("%s(%d)frame %p completed\n",
415 __FILE__,__LINE__,tbuf);
417 /* free current transmit buffer */
418 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
420 /* this tx buffer is done */
423 /* wait up sleeping writers */
424 wake_up_interruptible(&tty->write_wait);
426 /* get next pending transmit buffer */
427 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
429 if (debuglevel >= DEBUG_LEVEL_INFO)
430 printk("%s(%d)frame %p pending\n",
431 __FILE__,__LINE__,tbuf);
433 /* buffer not accepted by driver */
434 /* set this buffer as pending buffer */
441 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
443 /* Clear the re-entry flag */
444 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
446 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
451 if (debuglevel >= DEBUG_LEVEL_INFO)
452 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
454 } /* end of n_hdlc_send_frames() */
457 * n_hdlc_tty_wakeup - Callback for transmit wakeup
458 * @tty - pointer to associated tty instance data
460 * Called when low level device driver can accept more send data.
462 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
464 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
466 if (debuglevel >= DEBUG_LEVEL_INFO)
467 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
472 if (tty != n_hdlc->tty) {
473 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
477 n_hdlc_send_frames (n_hdlc, tty);
479 } /* end of n_hdlc_tty_wakeup() */
482 * n_hdlc_tty_receive - Called by tty driver when receive data is available
483 * @tty - pointer to tty instance data
484 * @data - pointer to received data
485 * @flags - pointer to flags for data
486 * @count - count of received data in bytes
488 * Called by tty low level driver when receive data is available. Data is
489 * interpreted as one HDLC frame.
491 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
492 char *flags, int count)
494 register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
495 register struct n_hdlc_buf *buf;
497 if (debuglevel >= DEBUG_LEVEL_INFO)
498 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
499 __FILE__,__LINE__, count);
501 /* This can happen if stuff comes in on the backup tty */
502 if (!n_hdlc || tty != n_hdlc->tty)
505 /* verify line is using HDLC discipline */
506 if (n_hdlc->magic != HDLC_MAGIC) {
507 printk("%s(%d) line not using HDLC discipline\n",
512 if ( count>maxframe ) {
513 if (debuglevel >= DEBUG_LEVEL_INFO)
514 printk("%s(%d) rx count>maxframesize, data discarded\n",
519 /* get a free HDLC buffer */
520 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
522 /* no buffers in free list, attempt to allocate another rx buffer */
523 /* unless the maximum count has been reached */
524 if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
525 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
529 if (debuglevel >= DEBUG_LEVEL_INFO)
530 printk("%s(%d) no more rx buffers, data discarded\n",
535 /* copy received data to HDLC buffer */
536 memcpy(buf->buf,data,count);
539 /* add HDLC buffer to list of received frames */
540 n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
542 /* wake up any blocked reads and perform async signalling */
543 wake_up_interruptible (&tty->read_wait);
544 if (n_hdlc->tty->fasync != NULL)
545 kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
547 } /* end of n_hdlc_tty_receive() */
550 * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
551 * @tty - pointer to tty instance data
552 * @file - pointer to open file object
553 * @buf - pointer to returned data buffer
554 * @nr - size of returned data buffer
556 * Returns the number of bytes returned or error code.
558 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
559 __u8 __user *buf, size_t nr)
561 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
563 struct n_hdlc_buf *rbuf;
565 if (debuglevel >= DEBUG_LEVEL_INFO)
566 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
568 /* Validate the pointers */
572 /* verify user access to buffer */
573 if (!access_ok(VERIFY_WRITE, buf, nr)) {
574 printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
575 "buffer\n", __FILE__, __LINE__);
582 if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
587 n_hdlc = tty2n_hdlc (tty);
588 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
589 tty != n_hdlc->tty) {
594 rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
599 if (file->f_flags & O_NONBLOCK) {
604 interruptible_sleep_on (&tty->read_wait);
605 if (signal_pending(current)) {
611 if (rbuf->count > nr)
612 /* frame too large for caller's buffer (discard frame) */
615 /* Copy the data to the caller's buffer */
616 if (copy_to_user(buf, rbuf->buf, rbuf->count))
622 /* return HDLC buffer to free list unless the free list */
623 /* count has exceeded the default value, in which case the */
624 /* buffer is freed back to the OS to conserve memory */
625 if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT)
628 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
632 } /* end of n_hdlc_tty_read() */
635 * n_hdlc_tty_write - write a single frame of data to device
636 * @tty - pointer to associated tty device instance data
637 * @file - pointer to file object data
638 * @data - pointer to transmit data (one frame)
639 * @count - size of transmit frame in bytes
641 * Returns the number of bytes written (or error code).
643 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
644 const unsigned char *data, size_t count)
646 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
648 DECLARE_WAITQUEUE(wait, current);
649 struct n_hdlc_buf *tbuf;
651 if (debuglevel >= DEBUG_LEVEL_INFO)
652 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
653 __FILE__,__LINE__,count);
655 /* Verify pointers */
659 if (n_hdlc->magic != HDLC_MAGIC)
662 /* verify frame size */
663 if (count > maxframe ) {
664 if (debuglevel & DEBUG_LEVEL_INFO)
666 "n_hdlc_tty_write: truncating user packet "
667 "from %lu to %d\n", (unsigned long) count,
674 add_wait_queue(&tty->write_wait, &wait);
675 set_current_state(TASK_INTERRUPTIBLE);
677 /* Allocate transmit buffer */
678 /* sleep until transmit buffer available */
679 while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) {
682 n_hdlc = tty2n_hdlc (tty);
683 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
684 tty != n_hdlc->tty) {
685 printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
690 if (signal_pending(current)) {
696 set_current_state(TASK_RUNNING);
697 remove_wait_queue(&tty->write_wait, &wait);
700 /* Retrieve the user's buffer */
701 memcpy(tbuf->buf, data, count);
704 tbuf->count = error = count;
705 n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
706 n_hdlc_send_frames(n_hdlc,tty);
711 } /* end of n_hdlc_tty_write() */
714 * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
715 * @tty - pointer to tty instance data
716 * @file - pointer to open file object for device
717 * @cmd - IOCTL command code
718 * @arg - argument for IOCTL call (cmd dependent)
720 * Returns command dependent result.
722 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
723 unsigned int cmd, unsigned long arg)
725 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
730 if (debuglevel >= DEBUG_LEVEL_INFO)
731 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
732 __FILE__,__LINE__,cmd);
734 /* Verify the status of the device */
735 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
740 /* report count of read data available */
741 /* in next available frame (if any) */
742 spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
743 if (n_hdlc->rx_buf_list.head)
744 count = n_hdlc->rx_buf_list.head->count;
747 spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
748 error = put_user(count, (int __user *)arg);
752 /* get the pending tx byte count in the driver */
753 count = tty_chars_in_buffer(tty);
754 /* add size of next output frame in queue */
755 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
756 if (n_hdlc->tx_buf_list.head)
757 count += n_hdlc->tx_buf_list.head->count;
758 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
759 error = put_user(count, (int __user *)arg);
763 error = n_tty_ioctl (tty, file, cmd, arg);
768 } /* end of n_hdlc_tty_ioctl() */
771 * n_hdlc_tty_poll - TTY callback for poll system call
772 * @tty - pointer to tty instance data
773 * @filp - pointer to open file object for device
774 * @poll_table - wait queue for operations
776 * Determine which operations (read/write) will not block and return info
778 * Returns a bit mask containing info on which ops will not block.
780 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
783 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
784 unsigned int mask = 0;
786 if (debuglevel >= DEBUG_LEVEL_INFO)
787 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
789 if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
790 /* queue current process into any wait queue that */
791 /* may awaken in the future (read and write) */
793 poll_wait(filp, &tty->read_wait, wait);
794 poll_wait(filp, &tty->write_wait, wait);
796 /* set bits for operations that won't block */
797 if (n_hdlc->rx_buf_list.head)
798 mask |= POLLIN | POLLRDNORM; /* readable */
799 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
801 if (tty_hung_up_p(filp))
803 if (!tty_is_writelocked(tty) &&
804 n_hdlc->tx_free_buf_list.head)
805 mask |= POLLOUT | POLLWRNORM; /* writable */
808 } /* end of n_hdlc_tty_poll() */
811 * n_hdlc_alloc - allocate an n_hdlc instance data structure
813 * Returns a pointer to newly created structure if success, otherwise %NULL
815 static struct n_hdlc *n_hdlc_alloc(void)
817 struct n_hdlc_buf *buf;
819 struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
824 memset(n_hdlc, 0, sizeof(*n_hdlc));
826 n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
827 n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
828 n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
829 n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
831 /* allocate free rx buffer list */
832 for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
833 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
835 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
836 else if (debuglevel >= DEBUG_LEVEL_INFO)
837 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
840 /* allocate free tx buffer list */
841 for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
842 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
844 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
845 else if (debuglevel >= DEBUG_LEVEL_INFO)
846 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
849 /* Initialize the control block */
850 n_hdlc->magic = HDLC_MAGIC;
855 } /* end of n_hdlc_alloc() */
858 * n_hdlc_buf_list_init - initialize specified HDLC buffer list
859 * @list - pointer to buffer list
861 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
863 memset(list, 0, sizeof(*list));
864 spin_lock_init(&list->spinlock);
865 } /* end of n_hdlc_buf_list_init() */
868 * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
869 * @list - pointer to buffer list
870 * @buf - pointer to buffer
872 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
873 struct n_hdlc_buf *buf)
876 spin_lock_irqsave(&list->spinlock,flags);
880 list->tail->link = buf;
886 spin_unlock_irqrestore(&list->spinlock,flags);
888 } /* end of n_hdlc_buf_put() */
891 * n_hdlc_buf_get - remove and return an HDLC buffer from list
892 * @list - pointer to HDLC buffer list
894 * Remove and return an HDLC buffer from the head of the specified HDLC buffer
896 * Returns a pointer to HDLC buffer if available, otherwise %NULL.
898 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
901 struct n_hdlc_buf *buf;
902 spin_lock_irqsave(&list->spinlock,flags);
906 list->head = buf->link;
912 spin_unlock_irqrestore(&list->spinlock,flags);
915 } /* end of n_hdlc_buf_get() */
917 static char hdlc_banner[] __initdata =
918 KERN_INFO "HDLC line discipline: version " HDLC_VERSION
920 static char hdlc_register_ok[] __initdata =
921 KERN_INFO "N_HDLC line discipline registered.\n";
922 static char hdlc_register_fail[] __initdata =
923 KERN_ERR "error registering line discipline: %d\n";
924 static char hdlc_init_fail[] __initdata =
925 KERN_INFO "N_HDLC: init failure %d\n";
927 static int __init n_hdlc_init(void)
931 /* range check maxframe arg */
934 else if (maxframe > 65535)
937 printk(hdlc_banner, maxframe);
939 status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
941 printk(hdlc_register_ok);
943 printk(hdlc_register_fail, status);
946 printk(hdlc_init_fail, status);
949 } /* end of init_module() */
951 static char hdlc_unregister_ok[] __exitdata =
952 KERN_INFO "N_HDLC: line discipline unregistered\n";
953 static char hdlc_unregister_fail[] __exitdata =
954 KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
956 static void __exit n_hdlc_exit(void)
958 /* Release tty registration of line discipline */
959 int status = tty_unregister_ldisc(N_HDLC);
962 printk(hdlc_unregister_fail, status);
964 printk(hdlc_unregister_ok);
967 module_init(n_hdlc_init);
968 module_exit(n_hdlc_exit);
970 MODULE_LICENSE("GPL");
971 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
972 module_param(debuglevel, int, 0);
973 module_param(maxframe, int, 0);
974 MODULE_ALIAS_LDISC(N_HDLC);