err.no Git - linux-2.6/blob - drivers/char/applicom.c

   1 /* Derived from Applicom driver ac.c for SCO Unix                            */
   2 /* Ported by David Woodhouse, Axiom (Cambridge) Ltd.                         */
   3 /* dwmw2@infradead.org 30/8/98                                               */
   4 /* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $                          */
   5 /* This module is for Linux 2.1 and 2.2 series kernels.                      */
   6 /*****************************************************************************/
   7 /* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt  */
   8 /* ceci pour reseter correctement apres une sortie sauvage                   */
   9 /* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption,     */
  10 /* LoopCount n'etait pas initialise a 0.                                     */
  11 /* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte   */
  12 /*           pour liberer le bus                                             */
  13 /* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
  14 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
  15 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
  16 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
  17 /* adresses de base des cartes, IOCTL 6 plus complet                         */
  18 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
  19 /* de code autre que le texte V2.6.1 en V2.8.0                               */
  20 /*****************************************************************************/
  21
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/slab.h>
  27 #include <linux/errno.h>
  28 #include <linux/miscdevice.h>
  29 #include <linux/pci.h>
  30 #include <linux/wait.h>
  31 #include <linux/init.h>
  32 #include <linux/fs.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/uaccess.h>
  36
  37 #include "applicom.h"
  38
  39
  40 /* NOTE: We use for loops with {write,read}b() instead of
  41    memcpy_{from,to}io throughout this driver. This is because
  42    the board doesn't correctly handle word accesses - only
  43    bytes.
  44 */
  45
  46
  47 #undef DEBUG
  48
  49 #define MAX_BOARD 8             /* maximum of pc board possible */
  50 #define MAX_ISA_BOARD 4
  51 #define LEN_RAM_IO 0x800
  52 #define AC_MINOR 157
  53
  54 #ifndef PCI_VENDOR_ID_APPLICOM
  55 #define PCI_VENDOR_ID_APPLICOM                0x1389
  56 #define PCI_DEVICE_ID_APPLICOM_PCIGENERIC     0x0001
  57 #define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
  58 #define PCI_DEVICE_ID_APPLICOM_PCI2000PFB     0x0003
  59 #endif
  60
  61 static char *applicom_pci_devnames[] = {
  62         "PCI board",
  63         "PCI2000IBS / PCI2000CAN",
  64         "PCI2000PFB"
  65 };
  66
  67 static struct pci_device_id applicom_pci_tbl[] = {
  68         { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
  69         { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
  70         { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
  71         { 0 }
  72 };
  73 MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
  74
  75 MODULE_AUTHOR("David Woodhouse & Applicom International");
  76 MODULE_DESCRIPTION("Driver for Applicom Profibus card");
  77 MODULE_LICENSE("GPL");
  78
  79 MODULE_SUPPORTED_DEVICE("ac");
  80
  81
  82 static struct applicom_board {
  83         unsigned long PhysIO;
  84         void __iomem *RamIO;
  85         wait_queue_head_t FlagSleepSend;
  86         long irq;
  87         spinlock_t mutex;
  88 } apbs[MAX_BOARD];
  89
  90 static unsigned int irq = 0;    /* interrupt number IRQ       */
  91 static unsigned long mem = 0;   /* physical segment of board  */
  92
  93 module_param(irq, uint, 0);
  94 MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
  95 module_param(mem, ulong, 0);
  96 MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
  97
  98 static unsigned int numboards;  /* number of installed boards */
  99 static volatile unsigned char Dummy;
 100 static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
 101 static unsigned int WriteErrorCount;    /* number of write error      */
 102 static unsigned int ReadErrorCount;     /* number of read error       */
 103 static unsigned int DeviceErrorCount;   /* number of device error     */
 104
 105 static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
 106 static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
 107 static int ac_ioctl(struct inode *, struct file *, unsigned int,
 108                     unsigned long);
 109 static irqreturn_t ac_interrupt(int, void *);
 110
 111 static const struct file_operations ac_fops = {
 112         .owner = THIS_MODULE,
 113         .llseek = no_llseek,
 114         .read = ac_read,
 115         .write = ac_write,
 116         .ioctl = ac_ioctl,
 117 };
 118
 119 static struct miscdevice ac_miscdev = {
 120         AC_MINOR,
 121         "ac",
 122         &ac_fops
 123 };
 124
 125 static int dummy;       /* dev_id for request_irq() */
 126
 127 static int ac_register_board(unsigned long physloc, void __iomem *loc,
 128                       unsigned char boardno)
 129 {
 130         volatile unsigned char byte_reset_it;
 131
 132         if((readb(loc + CONF_END_TEST)     != 0x00) ||
 133            (readb(loc + CONF_END_TEST + 1) != 0x55) ||
 134            (readb(loc + CONF_END_TEST + 2) != 0xAA) ||
 135            (readb(loc + CONF_END_TEST + 3) != 0xFF))
 136                 return 0;
 137
 138         if (!boardno)
 139                 boardno = readb(loc + NUMCARD_OWNER_TO_PC);
 140
 141         if (!boardno || boardno > MAX_BOARD) {
 142                 printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
 143                        boardno, physloc, MAX_BOARD);
 144                 return 0;
 145         }
 146
 147         if (apbs[boardno - 1].RamIO) {
 148                 printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n",
 149                        boardno, physloc, boardno, apbs[boardno-1].PhysIO);
 150                 return 0;
 151         }
 152
 153         boardno--;
 154
 155         apbs[boardno].PhysIO = physloc;
 156         apbs[boardno].RamIO = loc;
 157         init_waitqueue_head(&apbs[boardno].FlagSleepSend);
 158         spin_lock_init(&apbs[boardno].mutex);
 159         byte_reset_it = readb(loc + RAM_IT_TO_PC);
 160
 161         numboards++;
 162         return boardno + 1;
 163 }
 164
 165 static void __exit applicom_exit(void)
 166 {
 167         unsigned int i;
 168
 169         misc_deregister(&ac_miscdev);
 170
 171         for (i = 0; i < MAX_BOARD; i++) {
 172
 173                 if (!apbs[i].RamIO)
 174                         continue;
 175
 176                 if (apbs[i].irq)
 177                         free_irq(apbs[i].irq, &dummy);
 178
 179                 iounmap(apbs[i].RamIO);
 180         }
 181 }
 182
 183 static int __init applicom_init(void)
 184 {
 185         int i, numisa = 0;
 186         struct pci_dev *dev = NULL;
 187         void __iomem *RamIO;
 188         int boardno, ret;
 189
 190         printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
 191
 192         /* No mem and irq given - check for a PCI card */
 193
 194         while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
 195
 196                 if (!pci_match_id(applicom_pci_tbl, dev))
 197                         continue;
 198
 199                 if (pci_enable_device(dev))
 200                         return -EIO;
 201
 202                 RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
 203
 204                 if (!RamIO) {
 205                         printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
 206                                 "space at 0x%llx\n",
 207                                 (unsigned long long)pci_resource_start(dev, 0));
 208                         pci_disable_device(dev);
 209                         return -EIO;
 210                 }
 211
 212                 printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
 213                        applicom_pci_devnames[dev->device-1],
 214                            (unsigned long long)pci_resource_start(dev, 0),
 215                        dev->irq);
 216
 217                 boardno = ac_register_board(pci_resource_start(dev, 0),
 218                                 RamIO, 0);
 219                 if (!boardno) {
 220                         printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
 221                         iounmap(RamIO);
 222                         pci_disable_device(dev);
 223                         continue;
 224                 }
 225
 226                 if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
 227                         printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
 228                         iounmap(RamIO);
 229                         pci_disable_device(dev);
 230                         apbs[boardno - 1].RamIO = NULL;
 231                         continue;
 232                 }
 233
 234                 /* Enable interrupts. */
 235
 236                 writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
 237
 238                 apbs[boardno - 1].irq = dev->irq;
 239         }
 240
 241         /* Finished with PCI cards. If none registered,
 242          * and there was no mem/irq specified, exit */
 243
 244         if (!mem || !irq) {
 245                 if (numboards)
 246                         goto fin;
 247                 else {
 248                         printk(KERN_INFO "ac.o: No PCI boards found.\n");
 249                         printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
 250                         return -ENXIO;
 251                 }
 252         }
 253
 254         /* Now try the specified ISA cards */
 255
 256         for (i = 0; i < MAX_ISA_BOARD; i++) {
 257                 RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
 258
 259                 if (!RamIO) {
 260                         printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
 261                         continue;
 262                 }
 263
 264                 if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
 265                                                   RamIO,i+1))) {
 266                         iounmap(RamIO);
 267                         continue;
 268                 }
 269
 270                 printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
 271
 272                 if (!numisa) {
 273                         if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
 274                                 printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
 275                                 iounmap(RamIO);
 276                                 apbs[boardno - 1].RamIO = NULL;
 277                         }
 278                         else
 279                                 apbs[boardno - 1].irq = irq;
 280                 }
 281                 else
 282                         apbs[boardno - 1].irq = 0;
 283
 284                 numisa++;
 285         }
 286
 287         if (!numisa)
 288                 printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
 289                                 "at mem 0x%lx\n", mem);
 290
 291  fin:
 292         init_waitqueue_head(&FlagSleepRec);
 293
 294         WriteErrorCount = 0;
 295         ReadErrorCount = 0;
 296         DeviceErrorCount = 0;
 297
 298         if (numboards) {
 299                 ret = misc_register(&ac_miscdev);
 300                 if (ret) {
 301                         printk(KERN_WARNING "ac.o: Unable to register misc device\n");
 302                         goto out;
 303                 }
 304                 for (i = 0; i < MAX_BOARD; i++) {
 305                         int serial;
 306                         char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 307
 308                         if (!apbs[i].RamIO)
 309                                 continue;
 310
 311                         for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 312                                 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 313
 314                         boardname[serial] = 0;
 315
 316
 317                         printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
 318                                i+1, boardname,
 319                                (int)(readb(apbs[i].RamIO + VERS) >> 4),
 320                                (int)(readb(apbs[i].RamIO + VERS) & 0xF));
 321
 322                         serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
 323                                 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
 324                                 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 325
 326                         if (serial != 0)
 327                                 printk(" S/N %d\n", serial);
 328                         else
 329                                 printk("\n");
 330                 }
 331                 return 0;
 332         }
 333
 334         else
 335                 return -ENXIO;
 336
 337 out:
 338         for (i = 0; i < MAX_BOARD; i++) {
 339                 if (!apbs[i].RamIO)
 340                         continue;
 341                 if (apbs[i].irq)
 342                         free_irq(apbs[i].irq, &dummy);
 343                 iounmap(apbs[i].RamIO);
 344         }
 345         pci_disable_device(dev);
 346         return ret;
 347 }
 348
 349 module_init(applicom_init);
 350 module_exit(applicom_exit);
 351
 352
 353 static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
 354 {
 355         unsigned int NumCard;   /* Board number 1 -> 8           */
 356         unsigned int IndexCard; /* Index board number 0 -> 7     */
 357         unsigned char TicCard;  /* Board TIC to send             */
 358         unsigned long flags;    /* Current priority              */
 359         struct st_ram_io st_loc;
 360         struct mailbox tmpmailbox;
 361 #ifdef DEBUG
 362         int c;
 363 #endif
 364         DECLARE_WAITQUEUE(wait, current);
 365
 366         if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 367                 static int warncount = 5;
 368                 if (warncount) {
 369                         printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
 370                                count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
 371                         warncount--;
 372                 }
 373                 return -EINVAL;
 374         }
 375
 376         if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io)))
 377                 return -EFAULT;
 378
 379         if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
 380                           sizeof(struct mailbox)))
 381                 return -EFAULT;
 382
 383         NumCard = st_loc.num_card;      /* board number to send          */
 384         TicCard = st_loc.tic_des_from_pc;       /* tic number to send            */
 385         IndexCard = NumCard - 1;
 386
 387         if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
 388                 return -EINVAL;
 389
 390 #ifdef DEBUG
 391         printk("Write to applicom card #%d. struct st_ram_io follows:",
 392                IndexCard+1);
 393
 394                 for (c = 0; c < sizeof(struct st_ram_io);) {
 395
 396                         printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
 397
 398                         for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 399                                 printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
 400                         }
 401                 }
 402
 403                 printk("\nstruct mailbox follows:");
 404
 405                 for (c = 0; c < sizeof(struct mailbox);) {
 406                         printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
 407
 408                         for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 409                                 printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
 410                         }
 411                 }
 412
 413                 printk("\n");
 414 #endif
 415
 416         spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 417
 418         /* Test octet ready correct */
 419         if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) {
 420                 Dummy = readb(apbs[IndexCard].RamIO + VERS);
 421                 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 422                 printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
 423                        IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
 424                 DeviceErrorCount++;
 425                 return -EIO;
 426         }
 427
 428         /* Place ourselves on the wait queue */
 429         set_current_state(TASK_INTERRUPTIBLE);
 430         add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 431
 432         /* Check whether the card is ready for us */
 433         while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
 434                 Dummy = readb(apbs[IndexCard].RamIO + VERS);
 435                 /* It's busy. Sleep. */
 436
 437                 spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 438                 schedule();
 439                 if (signal_pending(current)) {
 440                         remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
 441                                           &wait);
 442                         return -EINTR;
 443                 }
 444                 spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 445                 set_current_state(TASK_INTERRUPTIBLE);
 446         }
 447
 448         /* We may not have actually slept */
 449         set_current_state(TASK_RUNNING);
 450         remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 451
 452         writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 453
 454         /* Which is best - lock down the pages with rawio and then
 455            copy directly, or use bounce buffers? For now we do the latter
 456            because it works with 2.2 still */
 457         {
 458                 unsigned char *from = (unsigned char *) &tmpmailbox;
 459                 void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
 460                 int c;
 461
 462                 for (c = 0; c < sizeof(struct mailbox); c++)
 463                         writeb(*(from++), to++);
 464         }
 465
 466         writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
 467         writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
 468         writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
 469         writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 470         writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 471         writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 472         Dummy = readb(apbs[IndexCard].RamIO + VERS);
 473         spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 474         return 0;
 475 }
 476
 477 static int do_ac_read(int IndexCard, char __user *buf,
 478                 struct st_ram_io *st_loc, struct mailbox *mailbox)
 479 {
 480         void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
 481         unsigned char *to = (unsigned char *)&mailbox;
 482 #ifdef DEBUG
 483         int c;
 484 #endif
 485
 486         st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
 487         st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 488
 489
 490         {
 491                 int c;
 492
 493                 for (c = 0; c < sizeof(struct mailbox); c++)
 494                         *(to++) = readb(from++);
 495         }
 496         writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 497         writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
 498         writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 499         writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC),
 500                apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
 501         writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 502         writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
 503         writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 504         Dummy = readb(apbs[IndexCard].RamIO + VERS);
 505
 506 #ifdef DEBUG
 507                 printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
 508
 509                 for (c = 0; c < sizeof(struct st_ram_io);) {
 510                         printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
 511
 512                         for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 513                                 printk(" %2.2X", ((unsigned char *)st_loc)[c]);
 514                         }
 515                 }
 516
 517                 printk("\nstruct mailbox follows:");
 518
 519                 for (c = 0; c < sizeof(struct mailbox);) {
 520                         printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
 521
 522                         for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 523                                 printk(" %2.2X", ((unsigned char *)mailbox)[c]);
 524                         }
 525                 }
 526                 printk("\n");
 527 #endif
 528         return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
 529 }
 530
 531 static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
 532 {
 533         unsigned long flags;
 534         unsigned int i;
 535         unsigned char tmp;
 536         int ret = 0;
 537         DECLARE_WAITQUEUE(wait, current);
 538 #ifdef DEBUG
 539         int loopcount=0;
 540 #endif
 541         /* No need to ratelimit this. Only root can trigger it anyway */
 542         if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 543                 printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
 544                         count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
 545                 return -EINVAL;
 546         }
 547
 548         while(1) {
 549                 /* Stick ourself on the wait queue */
 550                 set_current_state(TASK_INTERRUPTIBLE);
 551                 add_wait_queue(&FlagSleepRec, &wait);
 552
 553                 /* Scan each board, looking for one which has a packet for us */
 554                 for (i=0; i < MAX_BOARD; i++) {
 555                         if (!apbs[i].RamIO)
 556                                 continue;
 557                         spin_lock_irqsave(&apbs[i].mutex, flags);
 558
 559                         tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
 560
 561                         if (tmp == 2) {
 562                                 struct st_ram_io st_loc;
 563                                 struct mailbox mailbox;
 564
 565                                 /* Got a packet for us */
 566                                 ret = do_ac_read(i, buf, &st_loc, &mailbox);
 567                                 spin_unlock_irqrestore(&apbs[i].mutex, flags);
 568                                 set_current_state(TASK_RUNNING);
 569                                 remove_wait_queue(&FlagSleepRec, &wait);
 570
 571                                 if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
 572                                         return -EFAULT;
 573                                 if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
 574                                         return -EFAULT;
 575                                 return tmp;
 576                         }
 577
 578                         if (tmp > 2) {
 579                                 /* Got an error */
 580                                 Dummy = readb(apbs[i].RamIO + VERS);
 581
 582                                 spin_unlock_irqrestore(&apbs[i].mutex, flags);
 583                                 set_current_state(TASK_RUNNING);
 584                                 remove_wait_queue(&FlagSleepRec, &wait);
 585
 586                                 printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
 587                                        i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 588                                 DeviceErrorCount++;
 589                                 return -EIO;
 590                         }
 591
 592                         /* Nothing for us. Try the next board */
 593                         Dummy = readb(apbs[i].RamIO + VERS);
 594                         spin_unlock_irqrestore(&apbs[i].mutex, flags);
 595
 596                 } /* per board */
 597
 598                 /* OK - No boards had data for us. Sleep now */
 599
 600                 schedule();
 601                 remove_wait_queue(&FlagSleepRec, &wait);
 602
 603                 if (signal_pending(current))
 604                         return -EINTR;
 605
 606 #ifdef DEBUG
 607                 if (loopcount++ > 2) {
 608                         printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
 609                 }
 610 #endif
 611         }
 612 }
 613
 614 static irqreturn_t ac_interrupt(int vec, void *dev_instance)
 615 {
 616         unsigned int i;
 617         unsigned int FlagInt;
 618         unsigned int LoopCount;
 619         int handled = 0;
 620
 621         //    printk("Applicom interrupt on IRQ %d occurred\n", vec);
 622
 623         LoopCount = 0;
 624
 625         do {
 626                 FlagInt = 0;
 627                 for (i = 0; i < MAX_BOARD; i++) {
 628
 629                         /* Skip if this board doesn't exist */
 630                         if (!apbs[i].RamIO)
 631                                 continue;
 632
 633                         spin_lock(&apbs[i].mutex);
 634
 635                         /* Skip if this board doesn't want attention */
 636                         if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
 637                                 spin_unlock(&apbs[i].mutex);
 638                                 continue;
 639                         }
 640
 641                         handled = 1;
 642                         FlagInt = 1;
 643                         writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
 644
 645                         if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
 646                                 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
 647                                        i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 648                                 DeviceErrorCount++;
 649                         }
 650
 651                         if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) &&
 652                            (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
 653
 654                                 printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
 655                                        i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
 656                                 DeviceErrorCount++;
 657                         }
 658
 659                         if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) {     /* mailbox sent by the card ?   */
 660                                 if (waitqueue_active(&FlagSleepRec)) {
 661                                 wake_up_interruptible(&FlagSleepRec);
 662                         }
 663                         }
 664
 665                         if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) {   /* ram i/o free for write by pc ? */
 666                                 if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ?    */
 667                                         wake_up_interruptible(&apbs[i].FlagSleepSend);
 668                                 }
 669                         }
 670                         Dummy = readb(apbs[i].RamIO + VERS);
 671
 672                         if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
 673                                 /* There's another int waiting on this card */
 674                                 spin_unlock(&apbs[i].mutex);
 675                                 i--;
 676                         } else {
 677                                 spin_unlock(&apbs[i].mutex);
 678                         }
 679                 }
 680                 if (FlagInt)
 681                         LoopCount = 0;
 682                 else
 683                         LoopCount++;
 684         } while(LoopCount < 2);
 685         return IRQ_RETVAL(handled);
 686 }
 687
 688
 689
 690 static int ac_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 691
 692 {                               /* @ ADG ou ATO selon le cas */
 693         int i;
 694         unsigned char IndexCard;
 695         void __iomem *pmem;
 696         int ret = 0;
 697         volatile unsigned char byte_reset_it;
 698         struct st_ram_io *adgl;
 699         void __user *argp = (void __user *)arg;
 700
 701         /* In general, the device is only openable by root anyway, so we're not
 702            particularly concerned that bogus ioctls can flood the console. */
 703
 704         adgl = kmalloc(sizeof(struct st_ram_io), GFP_KERNEL);
 705         if (!adgl)
 706                 return -ENOMEM;
 707
 708         if (copy_from_user(adgl, argp, sizeof(struct st_ram_io))) {
 709                 kfree(adgl);
 710                 return -EFAULT;
 711         }
 712
 713         IndexCard = adgl->num_card-1;
 714
 715         if(cmd != 0 && cmd != 6 &&
 716            ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
 717                 static int warncount = 10;
 718                 if (warncount) {
 719                         printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
 720                         warncount--;
 721                 }
 722                 kfree(adgl);
 723                 return -EINVAL;
 724         }
 725
 726         switch (cmd) {
 727
 728         case 0:
 729                 pmem = apbs[IndexCard].RamIO;
 730                 for (i = 0; i < sizeof(struct st_ram_io); i++)
 731                         ((unsigned char *)adgl)[i]=readb(pmem++);
 732                 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 733                         ret = -EFAULT;
 734                 break;
 735         case 1:
 736                 pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 737                 for (i = 0; i < 4; i++)
 738                         adgl->conf_end_test[i] = readb(pmem++);
 739                 for (i = 0; i < 2; i++)
 740                         adgl->error_code[i] = readb(pmem++);
 741                 for (i = 0; i < 4; i++)
 742                         adgl->parameter_error[i] = readb(pmem++);
 743                 pmem = apbs[IndexCard].RamIO + VERS;
 744                 adgl->vers = readb(pmem);
 745                 pmem = apbs[IndexCard].RamIO + TYPE_CARD;
 746                 for (i = 0; i < 20; i++)
 747                         adgl->reserv1[i] = readb(pmem++);
 748                 *(int *)&adgl->reserv1[20] =
 749                         (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) +
 750                         (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) +
 751                         (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
 752
 753                 if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 754                         ret = -EFAULT;
 755                 break;
 756         case 2:
 757                 pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 758                 for (i = 0; i < 10; i++)
 759                         writeb(0xff, pmem++);
 760                 writeb(adgl->data_from_pc_ready,
 761                        apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 762
 763                 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 764
 765                 for (i = 0; i < MAX_BOARD; i++) {
 766                         if (apbs[i].RamIO) {
 767                                 byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
 768                         }
 769                 }
 770                 break;
 771         case 3:
 772                 pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
 773                 writeb(adgl->tic_des_from_pc, pmem);
 774                 break;
 775         case 4:
 776                 pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
 777                 adgl->tic_owner_to_pc     = readb(pmem++);
 778                 adgl->numcard_owner_to_pc = readb(pmem);
 779                 if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
 780                         ret = -EFAULT;
 781                 break;
 782         case 5:
 783                 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 784                 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 785                 writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 786                 writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 787                 writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 788                 break;
 789         case 6:
 790                 printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
 791                 printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
 792                 printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
 793                 printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
 794                 for (i = 0; i < MAX_BOARD; i++) {
 795                         int serial;
 796                         char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 797
 798                         if (!apbs[i].RamIO)
 799                                 continue;
 800
 801                         for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 802                                 boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 803                         boardname[serial] = 0;
 804
 805                         printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
 806                                i+1,
 807                                (int)(readb(apbs[IndexCard].RamIO + VERS) >> 4),
 808                                (int)(readb(apbs[IndexCard].RamIO + VERS) & 0xF),
 809                                boardname);
 810
 811
 812                         serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) +
 813                                 (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) +
 814                                 (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 815
 816                         if (serial != 0)
 817                                 printk(" S/N %d\n", serial);
 818                         else
 819                                 printk("\n");
 820                 }
 821                 if (DeviceErrorCount != 0)
 822                         printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
 823                 if (ReadErrorCount != 0)
 824                         printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
 825                 if (WriteErrorCount != 0)
 826                         printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
 827                 if (waitqueue_active(&FlagSleepRec))
 828                         printk(KERN_INFO "Process in read pending\n");
 829                 for (i = 0; i < MAX_BOARD; i++) {
 830                         if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
 831                                 printk(KERN_INFO "Process in write pending board %d\n",i+1);
 832                 }
 833                 break;
 834         default:
 835                 printk(KERN_INFO "APPLICOM driver ioctl, unknown function code %d\n",cmd) ;
 836                 ret = -EINVAL;
 837                 break;
 838         }
 839         Dummy = readb(apbs[IndexCard].RamIO + VERS);
 840         kfree(adgl);
 841         return 0;
 842 }
 843