err.no Git - linux-2.6/blob - drivers/block/cciss.c

   1 /*
   2  *    Disk Array driver for HP Smart Array controllers.
   3  *    (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
   4  *
   5  *    This program is free software; you can redistribute it and/or modify
   6  *    it under the terms of the GNU General Public License as published by
   7  *    the Free Software Foundation; version 2 of the License.
   8  *
   9  *    This program is distributed in the hope that it will be useful,
  10  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  12  *    General Public License for more details.
  13  *
  14  *    You should have received a copy of the GNU General Public License
  15  *    along with this program; if not, write to the Free Software
  16  *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  17  *    02111-1307, USA.
  18  *
  19  *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/types.h>
  26 #include <linux/pci.h>
  27 #include <linux/kernel.h>
  28 #include <linux/slab.h>
  29 #include <linux/delay.h>
  30 #include <linux/major.h>
  31 #include <linux/fs.h>
  32 #include <linux/bio.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/timer.h>
  35 #include <linux/proc_fs.h>
  36 #include <linux/seq_file.h>
  37 #include <linux/init.h>
  38 #include <linux/hdreg.h>
  39 #include <linux/spinlock.h>
  40 #include <linux/compat.h>
  41 #include <linux/blktrace_api.h>
  42 #include <asm/uaccess.h>
  43 #include <asm/io.h>
  44
  45 #include <linux/dma-mapping.h>
  46 #include <linux/blkdev.h>
  47 #include <linux/genhd.h>
  48 #include <linux/completion.h>
  49 #include <scsi/scsi.h>
  50 #include <scsi/sg.h>
  51 #include <scsi/scsi_ioctl.h>
  52 #include <linux/cdrom.h>
  53 #include <linux/scatterlist.h>
  54
  55 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
  56 #define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
  57 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
  58
  59 /* Embedded module documentation macros - see modules.h */
  60 MODULE_AUTHOR("Hewlett-Packard Company");
  61 MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
  62 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
  63                         " SA6i P600 P800 P400 P400i E200 E200i E500");
  64 MODULE_VERSION("3.6.14");
  65 MODULE_LICENSE("GPL");
  66
  67 #include "cciss_cmd.h"
  68 #include "cciss.h"
  69 #include <linux/cciss_ioctl.h>
  70
  71 /* define the PCI info for the cards we can control */
  72 static const struct pci_device_id cciss_pci_device_id[] = {
  73         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,  0x0E11, 0x4070},
  74         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080},
  75         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082},
  76         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083},
  77         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091},
  78         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A},
  79         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B},
  80         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C},
  81         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D},
  82         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSA,     0x103C, 0x3225},
  83         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3223},
  84         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3234},
  85         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3235},
  86         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3211},
  87         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3212},
  88         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
  89         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
  90         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
  91         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
  92         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
  93         {PCI_VENDOR_ID_HP,     PCI_ANY_ID,      PCI_ANY_ID, PCI_ANY_ID,
  94                 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
  95         {0,}
  96 };
  97
  98 MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
  99
 100 /*  board_id = Subsystem Device ID & Vendor ID
 101  *  product = Marketing Name for the board
 102  *  access = Address of the struct of function pointers
 103  *  nr_cmds = Number of commands supported by controller
 104  */
 105 static struct board_type products[] = {
 106         {0x40700E11, "Smart Array 5300", &SA5_access, 512},
 107         {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
 108         {0x40820E11, "Smart Array 532", &SA5B_access, 512},
 109         {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
 110         {0x409A0E11, "Smart Array 641", &SA5_access, 512},
 111         {0x409B0E11, "Smart Array 642", &SA5_access, 512},
 112         {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
 113         {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
 114         {0x40910E11, "Smart Array 6i", &SA5_access, 512},
 115         {0x3225103C, "Smart Array P600", &SA5_access, 512},
 116         {0x3223103C, "Smart Array P800", &SA5_access, 512},
 117         {0x3234103C, "Smart Array P400", &SA5_access, 512},
 118         {0x3235103C, "Smart Array P400i", &SA5_access, 512},
 119         {0x3211103C, "Smart Array E200i", &SA5_access, 120},
 120         {0x3212103C, "Smart Array E200", &SA5_access, 120},
 121         {0x3213103C, "Smart Array E200i", &SA5_access, 120},
 122         {0x3214103C, "Smart Array E200i", &SA5_access, 120},
 123         {0x3215103C, "Smart Array E200i", &SA5_access, 120},
 124         {0x3237103C, "Smart Array E500", &SA5_access, 512},
 125         {0x323D103C, "Smart Array P700m", &SA5_access, 512},
 126         {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
 127 };
 128
 129 /* How long to wait (in milliseconds) for board to go into simple mode */
 130 #define MAX_CONFIG_WAIT 30000
 131 #define MAX_IOCTL_CONFIG_WAIT 1000
 132
 133 /*define how many times we will try a command because of bus resets */
 134 #define MAX_CMD_RETRIES 3
 135
 136 #define MAX_CTLR        32
 137
 138 /* Originally cciss driver only supports 8 major numbers */
 139 #define MAX_CTLR_ORIG   8
 140
 141 static ctlr_info_t *hba[MAX_CTLR];
 142
 143 static void do_cciss_request(struct request_queue *q);
 144 static irqreturn_t do_cciss_intr(int irq, void *dev_id);
 145 static int cciss_open(struct inode *inode, struct file *filep);
 146 static int cciss_release(struct inode *inode, struct file *filep);
 147 static int cciss_ioctl(struct inode *inode, struct file *filep,
 148                        unsigned int cmd, unsigned long arg);
 149 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 150
 151 static int cciss_revalidate(struct gendisk *disk);
 152 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
 153 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 154                            int clear_all);
 155
 156 static void cciss_read_capacity(int ctlr, int logvol, int withirq,
 157                         sector_t *total_size, unsigned int *block_size);
 158 static void cciss_read_capacity_16(int ctlr, int logvol, int withirq,
 159                         sector_t *total_size, unsigned int *block_size);
 160 static void cciss_geometry_inquiry(int ctlr, int logvol,
 161                         int withirq, sector_t total_size,
 162                         unsigned int block_size, InquiryData_struct *inq_buff,
 163                                    drive_info_struct *drv);
 164 static void cciss_getgeometry(int cntl_num);
 165 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 166                                            __u32);
 167 static void start_io(ctlr_info_t *h);
 168 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
 169                    unsigned int use_unit_num, unsigned int log_unit,
 170                    __u8 page_code, unsigned char *scsi3addr, int cmd_type);
 171 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
 172                            unsigned int use_unit_num, unsigned int log_unit,
 173                            __u8 page_code, int cmd_type);
 174
 175 static void fail_all_cmds(unsigned long ctlr);
 176
 177 #ifdef CONFIG_PROC_FS
 178 static void cciss_procinit(int i);
 179 #else
 180 static void cciss_procinit(int i)
 181 {
 182 }
 183 #endif                          /* CONFIG_PROC_FS */
 184
 185 #ifdef CONFIG_COMPAT
 186 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
 187 #endif
 188
 189 static struct block_device_operations cciss_fops = {
 190         .owner = THIS_MODULE,
 191         .open = cciss_open,
 192         .release = cciss_release,
 193         .ioctl = cciss_ioctl,
 194         .getgeo = cciss_getgeo,
 195 #ifdef CONFIG_COMPAT
 196         .compat_ioctl = cciss_compat_ioctl,
 197 #endif
 198         .revalidate_disk = cciss_revalidate,
 199 };
 200
 201 /*
 202  * Enqueuing and dequeuing functions for cmdlists.
 203  */
 204 static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
 205 {
 206         if (*Qptr == NULL) {
 207                 *Qptr = c;
 208                 c->next = c->prev = c;
 209         } else {
 210                 c->prev = (*Qptr)->prev;
 211                 c->next = (*Qptr);
 212                 (*Qptr)->prev->next = c;
 213                 (*Qptr)->prev = c;
 214         }
 215 }
 216
 217 static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
 218                                           CommandList_struct *c)
 219 {
 220         if (c && c->next != c) {
 221                 if (*Qptr == c)
 222                         *Qptr = c->next;
 223                 c->prev->next = c->next;
 224                 c->next->prev = c->prev;
 225         } else {
 226                 *Qptr = NULL;
 227         }
 228         return c;
 229 }
 230
 231 #include "cciss_scsi.c"         /* For SCSI tape support */
 232
 233 #define RAID_UNKNOWN 6
 234
 235 #ifdef CONFIG_PROC_FS
 236
 237 /*
 238  * Report information about this controller.
 239  */
 240 #define ENG_GIG 1000000000
 241 #define ENG_GIG_FACTOR (ENG_GIG/512)
 242 #define ENGAGE_SCSI     "engage scsi"
 243 static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 244         "UNKNOWN"
 245 };
 246
 247 static struct proc_dir_entry *proc_cciss;
 248
 249 static void cciss_seq_show_header(struct seq_file *seq)
 250 {
 251         ctlr_info_t *h = seq->private;
 252
 253         seq_printf(seq, "%s: HP %s Controller\n"
 254                 "Board ID: 0x%08lx\n"
 255                 "Firmware Version: %c%c%c%c\n"
 256                 "IRQ: %d\n"
 257                 "Logical drives: %d\n"
 258                 "Current Q depth: %d\n"
 259                 "Current # commands on controller: %d\n"
 260                 "Max Q depth since init: %d\n"
 261                 "Max # commands on controller since init: %d\n"
 262                 "Max SG entries since init: %d\n",
 263                 h->devname,
 264                 h->product_name,
 265                 (unsigned long)h->board_id,
 266                 h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
 267                 h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
 268                 h->num_luns,
 269                 h->Qdepth, h->commands_outstanding,
 270                 h->maxQsinceinit, h->max_outstanding, h->maxSG);
 271
 272 #ifdef CONFIG_CISS_SCSI_TAPE
 273         cciss_seq_tape_report(seq, h->ctlr);
 274 #endif /* CONFIG_CISS_SCSI_TAPE */
 275 }
 276
 277 static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
 278 {
 279         ctlr_info_t *h = seq->private;
 280         unsigned ctlr = h->ctlr;
 281         unsigned long flags;
 282
 283         /* prevent displaying bogus info during configuration
 284          * or deconfiguration of a logical volume
 285          */
 286         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 287         if (h->busy_configuring) {
 288                 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 289                 return ERR_PTR(-EBUSY);
 290         }
 291         h->busy_configuring = 1;
 292         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 293
 294         if (*pos == 0)
 295                 cciss_seq_show_header(seq);
 296
 297         return pos;
 298 }
 299
 300 static int cciss_seq_show(struct seq_file *seq, void *v)
 301 {
 302         sector_t vol_sz, vol_sz_frac;
 303         ctlr_info_t *h = seq->private;
 304         unsigned ctlr = h->ctlr;
 305         loff_t *pos = v;
 306         drive_info_struct *drv = &h->drv[*pos];
 307
 308         if (*pos > h->highest_lun)
 309                 return 0;
 310
 311         if (drv->heads == 0)
 312                 return 0;
 313
 314         vol_sz = drv->nr_blocks;
 315         vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
 316         vol_sz_frac *= 100;
 317         sector_div(vol_sz_frac, ENG_GIG_FACTOR);
 318
 319         if (drv->raid_level > 5)
 320                 drv->raid_level = RAID_UNKNOWN;
 321         seq_printf(seq, "cciss/c%dd%d:"
 322                         "\t%4u.%02uGB\tRAID %s\n",
 323                         ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
 324                         raid_label[drv->raid_level]);
 325         return 0;
 326 }
 327
 328 static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 329 {
 330         ctlr_info_t *h = seq->private;
 331
 332         if (*pos > h->highest_lun)
 333                 return NULL;
 334         *pos += 1;
 335
 336         return pos;
 337 }
 338
 339 static void cciss_seq_stop(struct seq_file *seq, void *v)
 340 {
 341         ctlr_info_t *h = seq->private;
 342
 343         /* Only reset h->busy_configuring if we succeeded in setting
 344          * it during cciss_seq_start. */
 345         if (v == ERR_PTR(-EBUSY))
 346                 return;
 347
 348         h->busy_configuring = 0;
 349 }
 350
 351 static struct seq_operations cciss_seq_ops = {
 352         .start = cciss_seq_start,
 353         .show  = cciss_seq_show,
 354         .next  = cciss_seq_next,
 355         .stop  = cciss_seq_stop,
 356 };
 357
 358 static int cciss_seq_open(struct inode *inode, struct file *file)
 359 {
 360         int ret = seq_open(file, &cciss_seq_ops);
 361         struct seq_file *seq = file->private_data;
 362
 363         if (!ret)
 364                 seq->private = PDE(inode)->data;
 365
 366         return ret;
 367 }
 368
 369 static ssize_t
 370 cciss_proc_write(struct file *file, const char __user *buf,
 371                  size_t length, loff_t *ppos)
 372 {
 373         int err;
 374         char *buffer;
 375
 376 #ifndef CONFIG_CISS_SCSI_TAPE
 377         return -EINVAL;
 378 #endif
 379
 380         if (!buf || length > PAGE_SIZE - 1)
 381                 return -EINVAL;
 382
 383         buffer = (char *)__get_free_page(GFP_KERNEL);
 384         if (!buffer)
 385                 return -ENOMEM;
 386
 387         err = -EFAULT;
 388         if (copy_from_user(buffer, buf, length))
 389                 goto out;
 390         buffer[length] = '\0';
 391
 392 #ifdef CONFIG_CISS_SCSI_TAPE
 393         if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
 394                 struct seq_file *seq = file->private_data;
 395                 ctlr_info_t *h = seq->private;
 396                 int rc;
 397
 398                 rc = cciss_engage_scsi(h->ctlr);
 399                 if (rc != 0)
 400                         err = -rc;
 401                 else
 402                         err = length;
 403         } else
 404 #endif /* CONFIG_CISS_SCSI_TAPE */
 405                 err = -EINVAL;
 406         /* might be nice to have "disengage" too, but it's not
 407            safely possible. (only 1 module use count, lock issues.) */
 408
 409 out:
 410         free_page((unsigned long)buffer);
 411         return err;
 412 }
 413
 414 static struct file_operations cciss_proc_fops = {
 415         .owner   = THIS_MODULE,
 416         .open    = cciss_seq_open,
 417         .read    = seq_read,
 418         .llseek  = seq_lseek,
 419         .release = seq_release,
 420         .write   = cciss_proc_write,
 421 };
 422
 423 static void __devinit cciss_procinit(int i)
 424 {
 425         struct proc_dir_entry *pde;
 426
 427         if (proc_cciss == NULL)
 428                 proc_cciss = proc_mkdir("driver/cciss", NULL);
 429         if (!proc_cciss)
 430                 return;
 431         pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
 432                                         S_IROTH, proc_cciss,
 433                                         &cciss_proc_fops);
 434         if (!pde)
 435                 return;
 436
 437         pde->data = hba[i];
 438 }
 439 #endif                          /* CONFIG_PROC_FS */
 440
 441 /*
 442  * For operations that cannot sleep, a command block is allocated at init,
 443  * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
 444  * which ones are free or in use.  For operations that can wait for kmalloc
 445  * to possible sleep, this routine can be called with get_from_pool set to 0.
 446  * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
 447  */
 448 static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
 449 {
 450         CommandList_struct *c;
 451         int i;
 452         u64bit temp64;
 453         dma_addr_t cmd_dma_handle, err_dma_handle;
 454
 455         if (!get_from_pool) {
 456                 c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
 457                         sizeof(CommandList_struct), &cmd_dma_handle);
 458                 if (c == NULL)
 459                         return NULL;
 460                 memset(c, 0, sizeof(CommandList_struct));
 461
 462                 c->cmdindex = -1;
 463
 464                 c->err_info = (ErrorInfo_struct *)
 465                     pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
 466                             &err_dma_handle);
 467
 468                 if (c->err_info == NULL) {
 469                         pci_free_consistent(h->pdev,
 470                                 sizeof(CommandList_struct), c, cmd_dma_handle);
 471                         return NULL;
 472                 }
 473                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
 474         } else {                /* get it out of the controllers pool */
 475
 476                 do {
 477                         i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
 478                         if (i == h->nr_cmds)
 479                                 return NULL;
 480                 } while (test_and_set_bit
 481                          (i & (BITS_PER_LONG - 1),
 482                           h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
 483 #ifdef CCISS_DEBUG
 484                 printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
 485 #endif
 486                 c = h->cmd_pool + i;
 487                 memset(c, 0, sizeof(CommandList_struct));
 488                 cmd_dma_handle = h->cmd_pool_dhandle
 489                     + i * sizeof(CommandList_struct);
 490                 c->err_info = h->errinfo_pool + i;
 491                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
 492                 err_dma_handle = h->errinfo_pool_dhandle
 493                     + i * sizeof(ErrorInfo_struct);
 494                 h->nr_allocs++;
 495
 496                 c->cmdindex = i;
 497         }
 498
 499         c->busaddr = (__u32) cmd_dma_handle;
 500         temp64.val = (__u64) err_dma_handle;
 501         c->ErrDesc.Addr.lower = temp64.val32.lower;
 502         c->ErrDesc.Addr.upper = temp64.val32.upper;
 503         c->ErrDesc.Len = sizeof(ErrorInfo_struct);
 504
 505         c->ctlr = h->ctlr;
 506         return c;
 507 }
 508
 509 /*
 510  * Frees a command block that was previously allocated with cmd_alloc().
 511  */
 512 static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
 513 {
 514         int i;
 515         u64bit temp64;
 516
 517         if (!got_from_pool) {
 518                 temp64.val32.lower = c->ErrDesc.Addr.lower;
 519                 temp64.val32.upper = c->ErrDesc.Addr.upper;
 520                 pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
 521                                     c->err_info, (dma_addr_t) temp64.val);
 522                 pci_free_consistent(h->pdev, sizeof(CommandList_struct),
 523                                     c, (dma_addr_t) c->busaddr);
 524         } else {
 525                 i = c - h->cmd_pool;
 526                 clear_bit(i & (BITS_PER_LONG - 1),
 527                           h->cmd_pool_bits + (i / BITS_PER_LONG));
 528                 h->nr_frees++;
 529         }
 530 }
 531
 532 static inline ctlr_info_t *get_host(struct gendisk *disk)
 533 {
 534         return disk->queue->queuedata;
 535 }
 536
 537 static inline drive_info_struct *get_drv(struct gendisk *disk)
 538 {
 539         return disk->private_data;
 540 }
 541
 542 /*
 543  * Open.  Make sure the device is really there.
 544  */
 545 static int cciss_open(struct inode *inode, struct file *filep)
 546 {
 547         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
 548         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
 549
 550 #ifdef CCISS_DEBUG
 551         printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
 552 #endif                          /* CCISS_DEBUG */
 553
 554         if (host->busy_initializing || drv->busy_configuring)
 555                 return -EBUSY;
 556         /*
 557          * Root is allowed to open raw volume zero even if it's not configured
 558          * so array config can still work. Root is also allowed to open any
 559          * volume that has a LUN ID, so it can issue IOCTL to reread the
 560          * disk information.  I don't think I really like this
 561          * but I'm already using way to many device nodes to claim another one
 562          * for "raw controller".
 563          */
 564         if (drv->heads == 0) {
 565                 if (iminor(inode) != 0) {       /* not node 0? */
 566                         /* if not node 0 make sure it is a partition = 0 */
 567                         if (iminor(inode) & 0x0f) {
 568                                 return -ENXIO;
 569                                 /* if it is, make sure we have a LUN ID */
 570                         } else if (drv->LunID == 0) {
 571                                 return -ENXIO;
 572                         }
 573                 }
 574                 if (!capable(CAP_SYS_ADMIN))
 575                         return -EPERM;
 576         }
 577         drv->usage_count++;
 578         host->usage_count++;
 579         return 0;
 580 }
 581
 582 /*
 583  * Close.  Sync first.
 584  */
 585 static int cciss_release(struct inode *inode, struct file *filep)
 586 {
 587         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
 588         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
 589
 590 #ifdef CCISS_DEBUG
 591         printk(KERN_DEBUG "cciss_release %s\n",
 592                inode->i_bdev->bd_disk->disk_name);
 593 #endif                          /* CCISS_DEBUG */
 594
 595         drv->usage_count--;
 596         host->usage_count--;
 597         return 0;
 598 }
 599
 600 #ifdef CONFIG_COMPAT
 601
 602 static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
 603 {
 604         int ret;
 605         lock_kernel();
 606         ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
 607         unlock_kernel();
 608         return ret;
 609 }
 610
 611 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
 612                                   unsigned long arg);
 613 static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
 614                                       unsigned long arg);
 615
 616 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
 617 {
 618         switch (cmd) {
 619         case CCISS_GETPCIINFO:
 620         case CCISS_GETINTINFO:
 621         case CCISS_SETINTINFO:
 622         case CCISS_GETNODENAME:
 623         case CCISS_SETNODENAME:
 624         case CCISS_GETHEARTBEAT:
 625         case CCISS_GETBUSTYPES:
 626         case CCISS_GETFIRMVER:
 627         case CCISS_GETDRIVVER:
 628         case CCISS_REVALIDVOLS:
 629         case CCISS_DEREGDISK:
 630         case CCISS_REGNEWDISK:
 631         case CCISS_REGNEWD:
 632         case CCISS_RESCANDISK:
 633         case CCISS_GETLUNINFO:
 634                 return do_ioctl(f, cmd, arg);
 635
 636         case CCISS_PASSTHRU32:
 637                 return cciss_ioctl32_passthru(f, cmd, arg);
 638         case CCISS_BIG_PASSTHRU32:
 639                 return cciss_ioctl32_big_passthru(f, cmd, arg);
 640
 641         default:
 642                 return -ENOIOCTLCMD;
 643         }
 644 }
 645
 646 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
 647                                   unsigned long arg)
 648 {
 649         IOCTL32_Command_struct __user *arg32 =
 650             (IOCTL32_Command_struct __user *) arg;
 651         IOCTL_Command_struct arg64;
 652         IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
 653         int err;
 654         u32 cp;
 655
 656         err = 0;
 657         err |=
 658             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 659                            sizeof(arg64.LUN_info));
 660         err |=
 661             copy_from_user(&arg64.Request, &arg32->Request,
 662                            sizeof(arg64.Request));
 663         err |=
 664             copy_from_user(&arg64.error_info, &arg32->error_info,
 665                            sizeof(arg64.error_info));
 666         err |= get_user(arg64.buf_size, &arg32->buf_size);
 667         err |= get_user(cp, &arg32->buf);
 668         arg64.buf = compat_ptr(cp);
 669         err |= copy_to_user(p, &arg64, sizeof(arg64));
 670
 671         if (err)
 672                 return -EFAULT;
 673
 674         err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
 675         if (err)
 676                 return err;
 677         err |=
 678             copy_in_user(&arg32->error_info, &p->error_info,
 679                          sizeof(arg32->error_info));
 680         if (err)
 681                 return -EFAULT;
 682         return err;
 683 }
 684
 685 static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
 686                                       unsigned long arg)
 687 {
 688         BIG_IOCTL32_Command_struct __user *arg32 =
 689             (BIG_IOCTL32_Command_struct __user *) arg;
 690         BIG_IOCTL_Command_struct arg64;
 691         BIG_IOCTL_Command_struct __user *p =
 692             compat_alloc_user_space(sizeof(arg64));
 693         int err;
 694         u32 cp;
 695
 696         err = 0;
 697         err |=
 698             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 699                            sizeof(arg64.LUN_info));
 700         err |=
 701             copy_from_user(&arg64.Request, &arg32->Request,
 702                            sizeof(arg64.Request));
 703         err |=
 704             copy_from_user(&arg64.error_info, &arg32->error_info,
 705                            sizeof(arg64.error_info));
 706         err |= get_user(arg64.buf_size, &arg32->buf_size);
 707         err |= get_user(arg64.malloc_size, &arg32->malloc_size);
 708         err |= get_user(cp, &arg32->buf);
 709         arg64.buf = compat_ptr(cp);
 710         err |= copy_to_user(p, &arg64, sizeof(arg64));
 711
 712         if (err)
 713                 return -EFAULT;
 714
 715         err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
 716         if (err)
 717                 return err;
 718         err |=
 719             copy_in_user(&arg32->error_info, &p->error_info,
 720                          sizeof(arg32->error_info));
 721         if (err)
 722                 return -EFAULT;
 723         return err;
 724 }
 725 #endif
 726
 727 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 728 {
 729         drive_info_struct *drv = get_drv(bdev->bd_disk);
 730
 731         if (!drv->cylinders)
 732                 return -ENXIO;
 733
 734         geo->heads = drv->heads;
 735         geo->sectors = drv->sectors;
 736         geo->cylinders = drv->cylinders;
 737         return 0;
 738 }
 739
 740 /*
 741  * ioctl
 742  */
 743 static int cciss_ioctl(struct inode *inode, struct file *filep,
 744                        unsigned int cmd, unsigned long arg)
 745 {
 746         struct block_device *bdev = inode->i_bdev;
 747         struct gendisk *disk = bdev->bd_disk;
 748         ctlr_info_t *host = get_host(disk);
 749         drive_info_struct *drv = get_drv(disk);
 750         int ctlr = host->ctlr;
 751         void __user *argp = (void __user *)arg;
 752
 753 #ifdef CCISS_DEBUG
 754         printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
 755 #endif                          /* CCISS_DEBUG */
 756
 757         switch (cmd) {
 758         case CCISS_GETPCIINFO:
 759                 {
 760                         cciss_pci_info_struct pciinfo;
 761
 762                         if (!arg)
 763                                 return -EINVAL;
 764                         pciinfo.domain = pci_domain_nr(host->pdev->bus);
 765                         pciinfo.bus = host->pdev->bus->number;
 766                         pciinfo.dev_fn = host->pdev->devfn;
 767                         pciinfo.board_id = host->board_id;
 768                         if (copy_to_user
 769                             (argp, &pciinfo, sizeof(cciss_pci_info_struct)))
 770                                 return -EFAULT;
 771                         return 0;
 772                 }
 773         case CCISS_GETINTINFO:
 774                 {
 775                         cciss_coalint_struct intinfo;
 776                         if (!arg)
 777                                 return -EINVAL;
 778                         intinfo.delay =
 779                             readl(&host->cfgtable->HostWrite.CoalIntDelay);
 780                         intinfo.count =
 781                             readl(&host->cfgtable->HostWrite.CoalIntCount);
 782                         if (copy_to_user
 783                             (argp, &intinfo, sizeof(cciss_coalint_struct)))
 784                                 return -EFAULT;
 785                         return 0;
 786                 }
 787         case CCISS_SETINTINFO:
 788                 {
 789                         cciss_coalint_struct intinfo;
 790                         unsigned long flags;
 791                         int i;
 792
 793                         if (!arg)
 794                                 return -EINVAL;
 795                         if (!capable(CAP_SYS_ADMIN))
 796                                 return -EPERM;
 797                         if (copy_from_user
 798                             (&intinfo, argp, sizeof(cciss_coalint_struct)))
 799                                 return -EFAULT;
 800                         if ((intinfo.delay == 0) && (intinfo.count == 0))
 801                         {
 802 //                      printk("cciss_ioctl: delay and count cannot be 0\n");
 803                                 return -EINVAL;
 804                         }
 805                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 806                         /* Update the field, and then ring the doorbell */
 807                         writel(intinfo.delay,
 808                                &(host->cfgtable->HostWrite.CoalIntDelay));
 809                         writel(intinfo.count,
 810                                &(host->cfgtable->HostWrite.CoalIntCount));
 811                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
 812
 813                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
 814                                 if (!(readl(host->vaddr + SA5_DOORBELL)
 815                                       & CFGTBL_ChangeReq))
 816                                         break;
 817                                 /* delay and try again */
 818                                 udelay(1000);
 819                         }
 820                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 821                         if (i >= MAX_IOCTL_CONFIG_WAIT)
 822                                 return -EAGAIN;
 823                         return 0;
 824                 }
 825         case CCISS_GETNODENAME:
 826                 {
 827                         NodeName_type NodeName;
 828                         int i;
 829
 830                         if (!arg)
 831                                 return -EINVAL;
 832                         for (i = 0; i < 16; i++)
 833                                 NodeName[i] =
 834                                     readb(&host->cfgtable->ServerName[i]);
 835                         if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
 836                                 return -EFAULT;
 837                         return 0;
 838                 }
 839         case CCISS_SETNODENAME:
 840                 {
 841                         NodeName_type NodeName;
 842                         unsigned long flags;
 843                         int i;
 844
 845                         if (!arg)
 846                                 return -EINVAL;
 847                         if (!capable(CAP_SYS_ADMIN))
 848                                 return -EPERM;
 849
 850                         if (copy_from_user
 851                             (NodeName, argp, sizeof(NodeName_type)))
 852                                 return -EFAULT;
 853
 854                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 855
 856                         /* Update the field, and then ring the doorbell */
 857                         for (i = 0; i < 16; i++)
 858                                 writeb(NodeName[i],
 859                                        &host->cfgtable->ServerName[i]);
 860
 861                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
 862
 863                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
 864                                 if (!(readl(host->vaddr + SA5_DOORBELL)
 865                                       & CFGTBL_ChangeReq))
 866                                         break;
 867                                 /* delay and try again */
 868                                 udelay(1000);
 869                         }
 870                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 871                         if (i >= MAX_IOCTL_CONFIG_WAIT)
 872                                 return -EAGAIN;
 873                         return 0;
 874                 }
 875
 876         case CCISS_GETHEARTBEAT:
 877                 {
 878                         Heartbeat_type heartbeat;
 879
 880                         if (!arg)
 881                                 return -EINVAL;
 882                         heartbeat = readl(&host->cfgtable->HeartBeat);
 883                         if (copy_to_user
 884                             (argp, &heartbeat, sizeof(Heartbeat_type)))
 885                                 return -EFAULT;
 886                         return 0;
 887                 }
 888         case CCISS_GETBUSTYPES:
 889                 {
 890                         BusTypes_type BusTypes;
 891
 892                         if (!arg)
 893                                 return -EINVAL;
 894                         BusTypes = readl(&host->cfgtable->BusTypes);
 895                         if (copy_to_user
 896                             (argp, &BusTypes, sizeof(BusTypes_type)))
 897                                 return -EFAULT;
 898                         return 0;
 899                 }
 900         case CCISS_GETFIRMVER:
 901                 {
 902                         FirmwareVer_type firmware;
 903
 904                         if (!arg)
 905                                 return -EINVAL;
 906                         memcpy(firmware, host->firm_ver, 4);
 907
 908                         if (copy_to_user
 909                             (argp, firmware, sizeof(FirmwareVer_type)))
 910                                 return -EFAULT;
 911                         return 0;
 912                 }
 913         case CCISS_GETDRIVVER:
 914                 {
 915                         DriverVer_type DriverVer = DRIVER_VERSION;
 916
 917                         if (!arg)
 918                                 return -EINVAL;
 919
 920                         if (copy_to_user
 921                             (argp, &DriverVer, sizeof(DriverVer_type)))
 922                                 return -EFAULT;
 923                         return 0;
 924                 }
 925
 926         case CCISS_REVALIDVOLS:
 927                 return rebuild_lun_table(host, NULL);
 928
 929         case CCISS_GETLUNINFO:{
 930                         LogvolInfo_struct luninfo;
 931
 932                         luninfo.LunID = drv->LunID;
 933                         luninfo.num_opens = drv->usage_count;
 934                         luninfo.num_parts = 0;
 935                         if (copy_to_user(argp, &luninfo,
 936                                          sizeof(LogvolInfo_struct)))
 937                                 return -EFAULT;
 938                         return 0;
 939                 }
 940         case CCISS_DEREGDISK:
 941                 return rebuild_lun_table(host, disk);
 942
 943         case CCISS_REGNEWD:
 944                 return rebuild_lun_table(host, NULL);
 945
 946         case CCISS_PASSTHRU:
 947                 {
 948                         IOCTL_Command_struct iocommand;
 949                         CommandList_struct *c;
 950                         char *buff = NULL;
 951                         u64bit temp64;
 952                         unsigned long flags;
 953                         DECLARE_COMPLETION_ONSTACK(wait);
 954
 955                         if (!arg)
 956                                 return -EINVAL;
 957
 958                         if (!capable(CAP_SYS_RAWIO))
 959                                 return -EPERM;
 960
 961                         if (copy_from_user
 962                             (&iocommand, argp, sizeof(IOCTL_Command_struct)))
 963                                 return -EFAULT;
 964                         if ((iocommand.buf_size < 1) &&
 965                             (iocommand.Request.Type.Direction != XFER_NONE)) {
 966                                 return -EINVAL;
 967                         }
 968 #if 0                           /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
 969                         /* Check kmalloc limits */
 970                         if (iocommand.buf_size > 128000)
 971                                 return -EINVAL;
 972 #endif
 973                         if (iocommand.buf_size > 0) {
 974                                 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
 975                                 if (buff == NULL)
 976                                         return -EFAULT;
 977                         }
 978                         if (iocommand.Request.Type.Direction == XFER_WRITE) {
 979                                 /* Copy the data into the buffer we created */
 980                                 if (copy_from_user
 981                                     (buff, iocommand.buf, iocommand.buf_size)) {
 982                                         kfree(buff);
 983                                         return -EFAULT;
 984                                 }
 985                         } else {
 986                                 memset(buff, 0, iocommand.buf_size);
 987                         }
 988                         if ((c = cmd_alloc(host, 0)) == NULL) {
 989                                 kfree(buff);
 990                                 return -ENOMEM;
 991                         }
 992                         // Fill in the command type
 993                         c->cmd_type = CMD_IOCTL_PEND;
 994                         // Fill in Command Header
 995                         c->Header.ReplyQueue = 0;       // unused in simple mode
 996                         if (iocommand.buf_size > 0)     // buffer to fill
 997                         {
 998                                 c->Header.SGList = 1;
 999                                 c->Header.SGTotal = 1;
1000                         } else  // no buffers to fill
1001                         {
1002                                 c->Header.SGList = 0;
1003                                 c->Header.SGTotal = 0;
1004                         }
1005                         c->Header.LUN = iocommand.LUN_info;
1006                         c->Header.Tag.lower = c->busaddr;       // use the kernel address the cmd block for tag
1007
1008                         // Fill in Request block
1009                         c->Request = iocommand.Request;
1010
1011                         // Fill in the scatter gather information
1012                         if (iocommand.buf_size > 0) {
1013                                 temp64.val = pci_map_single(host->pdev, buff,
1014                                         iocommand.buf_size,
1015                                         PCI_DMA_BIDIRECTIONAL);
1016                                 c->SG[0].Addr.lower = temp64.val32.lower;
1017                                 c->SG[0].Addr.upper = temp64.val32.upper;
1018                                 c->SG[0].Len = iocommand.buf_size;
1019                                 c->SG[0].Ext = 0;       // we are not chaining
1020                         }
1021                         c->waiting = &wait;
1022
1023                         /* Put the request on the tail of the request queue */
1024                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1025                         addQ(&host->reqQ, c);
1026                         host->Qdepth++;
1027                         start_io(host);
1028                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1029
1030                         wait_for_completion(&wait);
1031
1032                         /* unlock the buffers from DMA */
1033                         temp64.val32.lower = c->SG[0].Addr.lower;
1034                         temp64.val32.upper = c->SG[0].Addr.upper;
1035                         pci_unmap_single(host->pdev, (dma_addr_t) temp64.val,
1036                                          iocommand.buf_size,
1037                                          PCI_DMA_BIDIRECTIONAL);
1038
1039                         /* Copy the error information out */
1040                         iocommand.error_info = *(c->err_info);
1041                         if (copy_to_user
1042                             (argp, &iocommand, sizeof(IOCTL_Command_struct))) {
1043                                 kfree(buff);
1044                                 cmd_free(host, c, 0);
1045                                 return -EFAULT;
1046                         }
1047
1048                         if (iocommand.Request.Type.Direction == XFER_READ) {
1049                                 /* Copy the data out of the buffer we created */
1050                                 if (copy_to_user
1051                                     (iocommand.buf, buff, iocommand.buf_size)) {
1052                                         kfree(buff);
1053                                         cmd_free(host, c, 0);
1054                                         return -EFAULT;
1055                                 }
1056                         }
1057                         kfree(buff);
1058                         cmd_free(host, c, 0);
1059                         return 0;
1060                 }
1061         case CCISS_BIG_PASSTHRU:{
1062                         BIG_IOCTL_Command_struct *ioc;
1063                         CommandList_struct *c;
1064                         unsigned char **buff = NULL;
1065                         int *buff_size = NULL;
1066                         u64bit temp64;
1067                         unsigned long flags;
1068                         BYTE sg_used = 0;
1069                         int status = 0;
1070                         int i;
1071                         DECLARE_COMPLETION_ONSTACK(wait);
1072                         __u32 left;
1073                         __u32 sz;
1074                         BYTE __user *data_ptr;
1075
1076                         if (!arg)
1077                                 return -EINVAL;
1078                         if (!capable(CAP_SYS_RAWIO))
1079                                 return -EPERM;
1080                         ioc = (BIG_IOCTL_Command_struct *)
1081                             kmalloc(sizeof(*ioc), GFP_KERNEL);
1082                         if (!ioc) {
1083                                 status = -ENOMEM;
1084                                 goto cleanup1;
1085                         }
1086                         if (copy_from_user(ioc, argp, sizeof(*ioc))) {
1087                                 status = -EFAULT;
1088                                 goto cleanup1;
1089                         }
1090                         if ((ioc->buf_size < 1) &&
1091                             (ioc->Request.Type.Direction != XFER_NONE)) {
1092                                 status = -EINVAL;
1093                                 goto cleanup1;
1094                         }
1095                         /* Check kmalloc limits  using all SGs */
1096                         if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
1097                                 status = -EINVAL;
1098                                 goto cleanup1;
1099                         }
1100                         if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
1101                                 status = -EINVAL;
1102                                 goto cleanup1;
1103                         }
1104                         buff =
1105                             kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
1106                         if (!buff) {
1107                                 status = -ENOMEM;
1108                                 goto cleanup1;
1109                         }
1110                         buff_size = kmalloc(MAXSGENTRIES * sizeof(int),
1111                                                    GFP_KERNEL);
1112                         if (!buff_size) {
1113                                 status = -ENOMEM;
1114                                 goto cleanup1;
1115                         }
1116                         left = ioc->buf_size;
1117                         data_ptr = ioc->buf;
1118                         while (left) {
1119                                 sz = (left >
1120                                       ioc->malloc_size) ? ioc->
1121                                     malloc_size : left;
1122                                 buff_size[sg_used] = sz;
1123                                 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
1124                                 if (buff[sg_used] == NULL) {
1125                                         status = -ENOMEM;
1126                                         goto cleanup1;
1127                                 }
1128                                 if (ioc->Request.Type.Direction == XFER_WRITE) {
1129                                         if (copy_from_user
1130                                             (buff[sg_used], data_ptr, sz)) {
1131                                                 status = -ENOMEM;
1132                                                 goto cleanup1;
1133                                         }
1134                                 } else {
1135                                         memset(buff[sg_used], 0, sz);
1136                                 }
1137                                 left -= sz;
1138                                 data_ptr += sz;
1139                                 sg_used++;
1140                         }
1141                         if ((c = cmd_alloc(host, 0)) == NULL) {
1142                                 status = -ENOMEM;
1143                                 goto cleanup1;
1144                         }
1145                         c->cmd_type = CMD_IOCTL_PEND;
1146                         c->Header.ReplyQueue = 0;
1147
1148                         if (ioc->buf_size > 0) {
1149                                 c->Header.SGList = sg_used;
1150                                 c->Header.SGTotal = sg_used;
1151                         } else {
1152                                 c->Header.SGList = 0;
1153                                 c->Header.SGTotal = 0;
1154                         }
1155                         c->Header.LUN = ioc->LUN_info;
1156                         c->Header.Tag.lower = c->busaddr;
1157
1158                         c->Request = ioc->Request;
1159                         if (ioc->buf_size > 0) {
1160                                 int i;
1161                                 for (i = 0; i < sg_used; i++) {
1162                                         temp64.val =
1163                                             pci_map_single(host->pdev, buff[i],
1164                                                     buff_size[i],
1165                                                     PCI_DMA_BIDIRECTIONAL);
1166                                         c->SG[i].Addr.lower =
1167                                             temp64.val32.lower;
1168                                         c->SG[i].Addr.upper =
1169                                             temp64.val32.upper;
1170                                         c->SG[i].Len = buff_size[i];
1171                                         c->SG[i].Ext = 0;       /* we are not chaining */
1172                                 }
1173                         }
1174                         c->waiting = &wait;
1175                         /* Put the request on the tail of the request queue */
1176                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1177                         addQ(&host->reqQ, c);
1178                         host->Qdepth++;
1179                         start_io(host);
1180                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1181                         wait_for_completion(&wait);
1182                         /* unlock the buffers from DMA */
1183                         for (i = 0; i < sg_used; i++) {
1184                                 temp64.val32.lower = c->SG[i].Addr.lower;
1185                                 temp64.val32.upper = c->SG[i].Addr.upper;
1186                                 pci_unmap_single(host->pdev,
1187                                         (dma_addr_t) temp64.val, buff_size[i],
1188                                         PCI_DMA_BIDIRECTIONAL);
1189                         }
1190                         /* Copy the error information out */
1191                         ioc->error_info = *(c->err_info);
1192                         if (copy_to_user(argp, ioc, sizeof(*ioc))) {
1193                                 cmd_free(host, c, 0);
1194                                 status = -EFAULT;
1195                                 goto cleanup1;
1196                         }
1197                         if (ioc->Request.Type.Direction == XFER_READ) {
1198                                 /* Copy the data out of the buffer we created */
1199                                 BYTE __user *ptr = ioc->buf;
1200                                 for (i = 0; i < sg_used; i++) {
1201                                         if (copy_to_user
1202                                             (ptr, buff[i], buff_size[i])) {
1203                                                 cmd_free(host, c, 0);
1204                                                 status = -EFAULT;
1205                                                 goto cleanup1;
1206                                         }
1207                                         ptr += buff_size[i];
1208                                 }
1209                         }
1210                         cmd_free(host, c, 0);
1211                         status = 0;
1212                       cleanup1:
1213                         if (buff) {
1214                                 for (i = 0; i < sg_used; i++)
1215                                         kfree(buff[i]);
1216                                 kfree(buff);
1217                         }
1218                         kfree(buff_size);
1219                         kfree(ioc);
1220                         return status;
1221                 }
1222
1223         /* scsi_cmd_ioctl handles these, below, though some are not */
1224         /* very meaningful for cciss.  SG_IO is the main one people want. */
1225
1226         case SG_GET_VERSION_NUM:
1227         case SG_SET_TIMEOUT:
1228         case SG_GET_TIMEOUT:
1229         case SG_GET_RESERVED_SIZE:
1230         case SG_SET_RESERVED_SIZE:
1231         case SG_EMULATED_HOST:
1232         case SG_IO:
1233         case SCSI_IOCTL_SEND_COMMAND:
1234                 return scsi_cmd_ioctl(filep, disk->queue, disk, cmd, argp);
1235
1236         /* scsi_cmd_ioctl would normally handle these, below, but */
1237         /* they aren't a good fit for cciss, as CD-ROMs are */
1238         /* not supported, and we don't have any bus/target/lun */
1239         /* which we present to the kernel. */
1240
1241         case CDROM_SEND_PACKET:
1242         case CDROMCLOSETRAY:
1243         case CDROMEJECT:
1244         case SCSI_IOCTL_GET_IDLUN:
1245         case SCSI_IOCTL_GET_BUS_NUMBER:
1246         default:
1247                 return -ENOTTY;
1248         }
1249 }
1250
1251 static void cciss_check_queues(ctlr_info_t *h)
1252 {
1253         int start_queue = h->next_to_run;
1254         int i;
1255
1256         /* check to see if we have maxed out the number of commands that can
1257          * be placed on the queue.  If so then exit.  We do this check here
1258          * in case the interrupt we serviced was from an ioctl and did not
1259          * free any new commands.
1260          */
1261         if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
1262                 return;
1263
1264         /* We have room on the queue for more commands.  Now we need to queue
1265          * them up.  We will also keep track of the next queue to run so
1266          * that every queue gets a chance to be started first.
1267          */
1268         for (i = 0; i < h->highest_lun + 1; i++) {
1269                 int curr_queue = (start_queue + i) % (h->highest_lun + 1);
1270                 /* make sure the disk has been added and the drive is real
1271                  * because this can be called from the middle of init_one.
1272                  */
1273                 if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
1274                         continue;
1275                 blk_start_queue(h->gendisk[curr_queue]->queue);
1276
1277                 /* check to see if we have maxed out the number of commands
1278                  * that can be placed on the queue.
1279                  */
1280                 if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
1281                         if (curr_queue == start_queue) {
1282                                 h->next_to_run =
1283                                     (start_queue + 1) % (h->highest_lun + 1);
1284                                 break;
1285                         } else {
1286                                 h->next_to_run = curr_queue;
1287                                 break;
1288                         }
1289                 } else {
1290                         curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
1291                 }
1292         }
1293 }
1294
1295 static void cciss_softirq_done(struct request *rq)
1296 {
1297         CommandList_struct *cmd = rq->completion_data;
1298         ctlr_info_t *h = hba[cmd->ctlr];
1299         unsigned long flags;
1300         u64bit temp64;
1301         int i, ddir;
1302
1303         if (cmd->Request.Type.Direction == XFER_READ)
1304                 ddir = PCI_DMA_FROMDEVICE;
1305         else
1306                 ddir = PCI_DMA_TODEVICE;
1307
1308         /* command did not need to be retried */
1309         /* unmap the DMA mapping for all the scatter gather elements */
1310         for (i = 0; i < cmd->Header.SGList; i++) {
1311                 temp64.val32.lower = cmd->SG[i].Addr.lower;
1312                 temp64.val32.upper = cmd->SG[i].Addr.upper;
1313                 pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
1314         }
1315
1316 #ifdef CCISS_DEBUG
1317         printk("Done with %p\n", rq);
1318 #endif                          /* CCISS_DEBUG */
1319
1320         if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, blk_rq_bytes(rq)))
1321                 BUG();
1322
1323         spin_lock_irqsave(&h->lock, flags);
1324         cmd_free(h, cmd, 1);
1325         cciss_check_queues(h);
1326         spin_unlock_irqrestore(&h->lock, flags);
1327 }
1328
1329 /* This function will check the usage_count of the drive to be updated/added.
1330  * If the usage_count is zero then the drive information will be updated and
1331  * the disk will be re-registered with the kernel.  If not then it will be
1332  * left alone for the next reboot.  The exception to this is disk 0 which
1333  * will always be left registered with the kernel since it is also the
1334  * controller node.  Any changes to disk 0 will show up on the next
1335  * reboot.
1336  */
1337 static void cciss_update_drive_info(int ctlr, int drv_index)
1338 {
1339         ctlr_info_t *h = hba[ctlr];
1340         struct gendisk *disk;
1341         InquiryData_struct *inq_buff = NULL;
1342         unsigned int block_size;
1343         sector_t total_size;
1344         unsigned long flags = 0;
1345         int ret = 0;
1346
1347         /* if the disk already exists then deregister it before proceeding */
1348         if (h->drv[drv_index].raid_level != -1) {
1349                 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1350                 h->drv[drv_index].busy_configuring = 1;
1351                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1352
1353                 /* deregister_disk sets h->drv[drv_index].queue = NULL */
1354                 /* which keeps the interrupt handler from starting */
1355                 /* the queue. */
1356                 ret = deregister_disk(h->gendisk[drv_index],
1357                                       &h->drv[drv_index], 0);
1358                 h->drv[drv_index].busy_configuring = 0;
1359         }
1360
1361         /* If the disk is in use return */
1362         if (ret)
1363                 return;
1364
1365         /* Get information about the disk and modify the driver structure */
1366         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1367         if (inq_buff == NULL)
1368                 goto mem_msg;
1369
1370         /* testing to see if 16-byte CDBs are already being used */
1371         if (h->cciss_read == CCISS_READ_16) {
1372                 cciss_read_capacity_16(h->ctlr, drv_index, 1,
1373                         &total_size, &block_size);
1374                 goto geo_inq;
1375         }
1376
1377         cciss_read_capacity(ctlr, drv_index, 1,
1378                             &total_size, &block_size);
1379
1380         /* if read_capacity returns all F's this volume is >2TB in size */
1381         /* so we switch to 16-byte CDB's for all read/write ops */
1382         if (total_size == 0xFFFFFFFFULL) {
1383                 cciss_read_capacity_16(ctlr, drv_index, 1,
1384                 &total_size, &block_size);
1385                 h->cciss_read = CCISS_READ_16;
1386                 h->cciss_write = CCISS_WRITE_16;
1387         } else {
1388                 h->cciss_read = CCISS_READ_10;
1389                 h->cciss_write = CCISS_WRITE_10;
1390         }
1391 geo_inq:
1392         cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
1393                                inq_buff, &h->drv[drv_index]);
1394
1395         ++h->num_luns;
1396         disk = h->gendisk[drv_index];
1397         set_capacity(disk, h->drv[drv_index].nr_blocks);
1398
1399         /* if it's the controller it's already added */
1400         if (drv_index) {
1401                 disk->queue = blk_init_queue(do_cciss_request, &h->lock);
1402                 sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
1403                 disk->major = h->major;
1404                 disk->first_minor = drv_index << NWD_SHIFT;
1405                 disk->fops = &cciss_fops;
1406                 disk->private_data = &h->drv[drv_index];
1407
1408                 /* Set up queue information */
1409                 blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
1410
1411                 /* This is a hardware imposed limit. */
1412                 blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
1413
1414                 /* This is a limit in the driver and could be eliminated. */
1415                 blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
1416
1417                 blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
1418
1419                 blk_queue_softirq_done(disk->queue, cciss_softirq_done);
1420
1421                 disk->queue->queuedata = hba[ctlr];
1422
1423                 blk_queue_hardsect_size(disk->queue,
1424                                         hba[ctlr]->drv[drv_index].block_size);
1425
1426                 /* Make sure all queue data is written out before */
1427                 /* setting h->drv[drv_index].queue, as setting this */
1428                 /* allows the interrupt handler to start the queue */
1429                 wmb();
1430                 h->drv[drv_index].queue = disk->queue;
1431                 add_disk(disk);
1432         }
1433
1434       freeret:
1435         kfree(inq_buff);
1436         return;
1437       mem_msg:
1438         printk(KERN_ERR "cciss: out of memory\n");
1439         goto freeret;
1440 }
1441
1442 /* This function will find the first index of the controllers drive array
1443  * that has a -1 for the raid_level and will return that index.  This is
1444  * where new drives will be added.  If the index to be returned is greater
1445  * than the highest_lun index for the controller then highest_lun is set
1446  * to this new index.  If there are no available indexes then -1 is returned.
1447  */
1448 static int cciss_find_free_drive_index(int ctlr)
1449 {
1450         int i;
1451
1452         for (i = 0; i < CISS_MAX_LUN; i++) {
1453                 if (hba[ctlr]->drv[i].raid_level == -1) {
1454                         if (i > hba[ctlr]->highest_lun)
1455                                 hba[ctlr]->highest_lun = i;
1456                         return i;
1457                 }
1458         }
1459         return -1;
1460 }
1461
1462 /* This function will add and remove logical drives from the Logical
1463  * drive array of the controller and maintain persistency of ordering
1464  * so that mount points are preserved until the next reboot.  This allows
1465  * for the removal of logical drives in the middle of the drive array
1466  * without a re-ordering of those drives.
1467  * INPUT
1468  * h            = The controller to perform the operations on
1469  * del_disk     = The disk to remove if specified.  If the value given
1470  *                is NULL then no disk is removed.
1471  */
1472 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
1473 {
1474         int ctlr = h->ctlr;
1475         int num_luns;
1476         ReportLunData_struct *ld_buff = NULL;
1477         drive_info_struct *drv = NULL;
1478         int return_code;
1479         int listlength = 0;
1480         int i;
1481         int drv_found;
1482         int drv_index = 0;
1483         __u32 lunid = 0;
1484         unsigned long flags;
1485
1486         /* Set busy_configuring flag for this operation */
1487         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1488         if (h->busy_configuring) {
1489                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1490                 return -EBUSY;
1491         }
1492         h->busy_configuring = 1;
1493
1494         /* if del_disk is NULL then we are being called to add a new disk
1495          * and update the logical drive table.  If it is not NULL then
1496          * we will check if the disk is in use or not.
1497          */
1498         if (del_disk != NULL) {
1499                 drv = get_drv(del_disk);
1500                 drv->busy_configuring = 1;
1501                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1502                 return_code = deregister_disk(del_disk, drv, 1);
1503                 drv->busy_configuring = 0;
1504                 h->busy_configuring = 0;
1505                 return return_code;
1506         } else {
1507                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1508                 if (!capable(CAP_SYS_RAWIO))
1509                         return -EPERM;
1510
1511                 ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
1512                 if (ld_buff == NULL)
1513                         goto mem_msg;
1514
1515                 return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
1516                                               sizeof(ReportLunData_struct), 0,
1517                                               0, 0, TYPE_CMD);
1518
1519                 if (return_code == IO_OK) {
1520                         listlength =
1521                                 be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
1522                 } else {        /* reading number of logical volumes failed */
1523                         printk(KERN_WARNING "cciss: report logical volume"
1524                                " command failed\n");
1525                         listlength = 0;
1526                         goto freeret;
1527                 }
1528
1529                 num_luns = listlength / 8;      /* 8 bytes per entry */
1530                 if (num_luns > CISS_MAX_LUN) {
1531                         num_luns = CISS_MAX_LUN;
1532                         printk(KERN_WARNING "cciss: more luns configured"
1533                                " on controller than can be handled by"
1534                                " this driver.\n");
1535                 }
1536
1537                 /* Compare controller drive array to drivers drive array.
1538                  * Check for updates in the drive information and any new drives
1539                  * on the controller.
1540                  */
1541                 for (i = 0; i < num_luns; i++) {
1542                         int j;
1543
1544                         drv_found = 0;
1545
1546                         lunid = (0xff &
1547                                  (unsigned int)(ld_buff->LUN[i][3])) << 24;
1548                         lunid |= (0xff &
1549                                   (unsigned int)(ld_buff->LUN[i][2])) << 16;
1550                         lunid |= (0xff &
1551                                   (unsigned int)(ld_buff->LUN[i][1])) << 8;
1552                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
1553
1554                         /* Find if the LUN is already in the drive array
1555                          * of the controller.  If so then update its info
1556                          * if not is use.  If it does not exist then find
1557                          * the first free index and add it.
1558                          */
1559                         for (j = 0; j <= h->highest_lun; j++) {
1560                                 if (h->drv[j].LunID == lunid) {
1561                                         drv_index = j;
1562                                         drv_found = 1;
1563                                 }
1564                         }
1565
1566                         /* check if the drive was found already in the array */
1567                         if (!drv_found) {
1568                                 drv_index = cciss_find_free_drive_index(ctlr);
1569                                 if (drv_index == -1)
1570                                         goto freeret;
1571
1572                                 /*Check if the gendisk needs to be allocated */
1573                                 if (!h->gendisk[drv_index]){
1574                                         h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
1575                                         if (!h->gendisk[drv_index]){
1576                                                 printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
1577                                                 goto mem_msg;
1578                                         }
1579                                 }
1580                         }
1581                         h->drv[drv_index].LunID = lunid;
1582                         cciss_update_drive_info(ctlr, drv_index);
1583                 }               /* end for */
1584         }                       /* end else */
1585
1586       freeret:
1587         kfree(ld_buff);
1588         h->busy_configuring = 0;
1589         /* We return -1 here to tell the ACU that we have registered/updated
1590          * all of the drives that we can and to keep it from calling us
1591          * additional times.
1592          */
1593         return -1;
1594       mem_msg:
1595         printk(KERN_ERR "cciss: out of memory\n");
1596         goto freeret;
1597 }
1598
1599 /* This function will deregister the disk and it's queue from the
1600  * kernel.  It must be called with the controller lock held and the
1601  * drv structures busy_configuring flag set.  It's parameters are:
1602  *
1603  * disk = This is the disk to be deregistered
1604  * drv  = This is the drive_info_struct associated with the disk to be
1605  *        deregistered.  It contains information about the disk used
1606  *        by the driver.
1607  * clear_all = This flag determines whether or not the disk information
1608  *             is going to be completely cleared out and the highest_lun
1609  *             reset.  Sometimes we want to clear out information about
1610  *             the disk in preparation for re-adding it.  In this case
1611  *             the highest_lun should be left unchanged and the LunID
1612  *             should not be cleared.
1613 */
1614 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
1615                            int clear_all)
1616 {
1617         int i;
1618         ctlr_info_t *h = get_host(disk);
1619
1620         if (!capable(CAP_SYS_RAWIO))
1621                 return -EPERM;
1622
1623         /* make sure logical volume is NOT is use */
1624         if (clear_all || (h->gendisk[0] == disk)) {
1625                 if (drv->usage_count > 1)
1626                         return -EBUSY;
1627         } else if (drv->usage_count > 0)
1628                 return -EBUSY;
1629
1630         /* invalidate the devices and deregister the disk.  If it is disk
1631          * zero do not deregister it but just zero out it's values.  This
1632          * allows us to delete disk zero but keep the controller registered.
1633          */
1634         if (h->gendisk[0] != disk) {
1635                 struct request_queue *q = disk->queue;
1636                 if (disk->flags & GENHD_FL_UP)
1637                         del_gendisk(disk);
1638                 if (q) {
1639                         blk_cleanup_queue(q);
1640                         /* Set drv->queue to NULL so that we do not try
1641                          * to call blk_start_queue on this queue in the
1642                          * interrupt handler
1643                          */
1644                         drv->queue = NULL;
1645                 }
1646                 /* If clear_all is set then we are deleting the logical
1647                  * drive, not just refreshing its info.  For drives
1648                  * other than disk 0 we will call put_disk.  We do not
1649                  * do this for disk 0 as we need it to be able to
1650                  * configure the controller.
1651                 */
1652                 if (clear_all){
1653                         /* This isn't pretty, but we need to find the
1654                          * disk in our array and NULL our the pointer.
1655                          * This is so that we will call alloc_disk if
1656                          * this index is used again later.
1657                         */
1658                         for (i=0; i < CISS_MAX_LUN; i++){
1659                                 if(h->gendisk[i] == disk){
1660                                         h->gendisk[i] = NULL;
1661                                         break;
1662                                 }
1663                         }
1664                         put_disk(disk);
1665                 }
1666         } else {
1667                 set_capacity(disk, 0);
1668         }
1669
1670         --h->num_luns;
1671         /* zero out the disk size info */
1672         drv->nr_blocks = 0;
1673         drv->block_size = 0;
1674         drv->heads = 0;
1675         drv->sectors = 0;
1676         drv->cylinders = 0;
1677         drv->raid_level = -1;   /* This can be used as a flag variable to
1678                                  * indicate that this element of the drive
1679                                  * array is free.
1680                                  */
1681
1682         if (clear_all) {
1683                 /* check to see if it was the last disk */
1684                 if (drv == h->drv + h->highest_lun) {
1685                         /* if so, find the new hightest lun */
1686                         int i, newhighest = -1;
1687                         for (i = 0; i < h->highest_lun; i++) {
1688                                 /* if the disk has size > 0, it is available */
1689                                 if (h->drv[i].heads)
1690                                         newhighest = i;
1691                         }
1692                         h->highest_lun = newhighest;
1693                 }
1694
1695                 drv->LunID = 0;
1696         }
1697         return 0;
1698 }
1699
1700 static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
1701                                                                                                                            1: address logical volume log_unit,
1702                                                                                                                            2: periph device address is scsi3addr */
1703                     unsigned int log_unit, __u8 page_code,
1704                     unsigned char *scsi3addr, int cmd_type)
1705 {
1706         ctlr_info_t *h = hba[ctlr];
1707         u64bit buff_dma_handle;
1708         int status = IO_OK;
1709
1710         c->cmd_type = CMD_IOCTL_PEND;
1711         c->Header.ReplyQueue = 0;
1712         if (buff != NULL) {
1713                 c->Header.SGList = 1;
1714                 c->Header.SGTotal = 1;
1715         } else {
1716                 c->Header.SGList = 0;
1717                 c->Header.SGTotal = 0;
1718         }
1719         c->Header.Tag.lower = c->busaddr;
1720
1721         c->Request.Type.Type = cmd_type;
1722         if (cmd_type == TYPE_CMD) {
1723                 switch (cmd) {
1724                 case CISS_INQUIRY:
1725                         /* If the logical unit number is 0 then, this is going
1726                            to controller so It's a physical command
1727                            mode = 0 target = 0.  So we have nothing to write.
1728                            otherwise, if use_unit_num == 1,
1729                            mode = 1(volume set addressing) target = LUNID
1730                            otherwise, if use_unit_num == 2,
1731                            mode = 0(periph dev addr) target = scsi3addr */
1732                         if (use_unit_num == 1) {
1733                                 c->Header.LUN.LogDev.VolId =
1734                                     h->drv[log_unit].LunID;
1735                                 c->Header.LUN.LogDev.Mode = 1;
1736                         } else if (use_unit_num == 2) {
1737                                 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
1738                                        8);
1739                                 c->Header.LUN.LogDev.Mode = 0;
1740                         }
1741                         /* are we trying to read a vital product page */
1742                         if (page_code != 0) {
1743                                 c->Request.CDB[1] = 0x01;
1744                                 c->Request.CDB[2] = page_code;
1745                         }
1746                         c->Request.CDBLen = 6;
1747                         c->Request.Type.Attribute = ATTR_SIMPLE;
1748                         c->Request.Type.Direction = XFER_READ;
1749                         c->Request.Timeout = 0;
1750                         c->Request.CDB[0] = CISS_INQUIRY;
1751                         c->Request.CDB[4] = size & 0xFF;
1752                         break;
1753                 case CISS_REPORT_LOG:
1754                 case CISS_REPORT_PHYS:
1755                         /* Talking to controller so It's a physical command
1756                            mode = 00 target = 0.  Nothing to write.
1757                          */
1758                         c->Request.CDBLen = 12;
1759                         c->Request.Type.Attribute = ATTR_SIMPLE;
1760                         c->Request.Type.Direction = XFER_READ;
1761                         c->Request.Timeout = 0;
1762                         c->Request.CDB[0] = cmd;
1763                         c->Request.CDB[6] = (size >> 24) & 0xFF;        //MSB
1764                         c->Request.CDB[7] = (size >> 16) & 0xFF;
1765                         c->Request.CDB[8] = (size >> 8) & 0xFF;
1766                         c->Request.CDB[9] = size & 0xFF;
1767                         break;
1768
1769                 case CCISS_READ_CAPACITY:
1770                         c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1771                         c->Header.LUN.LogDev.Mode = 1;
1772                         c->Request.CDBLen = 10;
1773                         c->Request.Type.Attribute = ATTR_SIMPLE;
1774                         c->Request.Type.Direction = XFER_READ;
1775                         c->Request.Timeout = 0;
1776                         c->Request.CDB[0] = cmd;
1777                         break;
1778                 case CCISS_READ_CAPACITY_16:
1779                         c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1780                         c->Header.LUN.LogDev.Mode = 1;
1781                         c->Request.CDBLen = 16;
1782                         c->Request.Type.Attribute = ATTR_SIMPLE;
1783                         c->Request.Type.Direction = XFER_READ;
1784                         c->Request.Timeout = 0;
1785                         c->Request.CDB[0] = cmd;
1786                         c->Request.CDB[1] = 0x10;
1787                         c->Request.CDB[10] = (size >> 24) & 0xFF;
1788                         c->Request.CDB[11] = (size >> 16) & 0xFF;
1789                         c->Request.CDB[12] = (size >> 8) & 0xFF;
1790                         c->Request.CDB[13] = size & 0xFF;
1791                         c->Request.Timeout = 0;
1792                         c->Request.CDB[0] = cmd;
1793                         break;
1794                 case CCISS_CACHE_FLUSH:
1795                         c->Request.CDBLen = 12;
1796                         c->Request.Type.Attribute = ATTR_SIMPLE;
1797                         c->Request.Type.Direction = XFER_WRITE;
1798                         c->Request.Timeout = 0;
1799                         c->Request.CDB[0] = BMIC_WRITE;
1800                         c->Request.CDB[6] = BMIC_CACHE_FLUSH;
1801                         break;
1802                 default:
1803                         printk(KERN_WARNING
1804                                "cciss%d:  Unknown Command 0x%c\n", ctlr, cmd);
1805                         return IO_ERROR;
1806                 }
1807         } else if (cmd_type == TYPE_MSG) {
1808                 switch (cmd) {
1809                 case 0: /* ABORT message */
1810                         c->Request.CDBLen = 12;
1811                         c->Request.Type.Attribute = ATTR_SIMPLE;
1812                         c->Request.Type.Direction = XFER_WRITE;
1813                         c->Request.Timeout = 0;
1814                         c->Request.CDB[0] = cmd;        /* abort */
1815                         c->Request.CDB[1] = 0;  /* abort a command */
1816                         /* buff contains the tag of the command to abort */
1817                         memcpy(&c->Request.CDB[4], buff, 8);
1818                         break;
1819                 case 1: /* RESET message */
1820                         c->Request.CDBLen = 12;
1821                         c->Request.Type.Attribute = ATTR_SIMPLE;
1822                         c->Request.Type.Direction = XFER_WRITE;
1823                         c->Request.Timeout = 0;
1824                         memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
1825                         c->Request.CDB[0] = cmd;        /* reset */
1826                         c->Request.CDB[1] = 0x04;       /* reset a LUN */
1827                         break;
1828                 case 3: /* No-Op message */
1829                         c->Request.CDBLen = 1;
1830                         c->Request.Type.Attribute = ATTR_SIMPLE;
1831                         c->Request.Type.Direction = XFER_WRITE;
1832                         c->Request.Timeout = 0;
1833                         c->Request.CDB[0] = cmd;
1834                         break;
1835                 default:
1836                         printk(KERN_WARNING
1837                                "cciss%d: unknown message type %d\n", ctlr, cmd);
1838                         return IO_ERROR;
1839                 }
1840         } else {
1841                 printk(KERN_WARNING
1842                        "cciss%d: unknown command type %d\n", ctlr, cmd_type);
1843                 return IO_ERROR;
1844         }
1845         /* Fill in the scatter gather information */
1846         if (size > 0) {
1847                 buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
1848                                                              buff, size,
1849                                                              PCI_DMA_BIDIRECTIONAL);
1850                 c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
1851                 c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
1852                 c->SG[0].Len = size;
1853                 c->SG[0].Ext = 0;       /* we are not chaining */
1854         }
1855         return status;
1856 }
1857
1858 static int sendcmd_withirq(__u8 cmd,
1859                            int ctlr,
1860                            void *buff,
1861                            size_t size,
1862                            unsigned int use_unit_num,
1863                            unsigned int log_unit, __u8 page_code, int cmd_type)
1864 {
1865         ctlr_info_t *h = hba[ctlr];
1866         CommandList_struct *c;
1867         u64bit buff_dma_handle;
1868         unsigned long flags;
1869         int return_status;
1870         DECLARE_COMPLETION_ONSTACK(wait);
1871
1872         if ((c = cmd_alloc(h, 0)) == NULL)
1873                 return -ENOMEM;
1874         return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
1875                                  log_unit, page_code, NULL, cmd_type);
1876         if (return_status != IO_OK) {
1877                 cmd_free(h, c, 0);
1878                 return return_status;
1879         }
1880       resend_cmd2:
1881         c->waiting = &wait;
1882
1883         /* Put the request on the tail of the queue and send it */
1884         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1885         addQ(&h->reqQ, c);
1886         h->Qdepth++;
1887         start_io(h);
1888         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1889
1890         wait_for_completion(&wait);
1891
1892         if (c->err_info->CommandStatus != 0) {  /* an error has occurred */
1893                 switch (c->err_info->CommandStatus) {
1894                 case CMD_TARGET_STATUS:
1895                         printk(KERN_WARNING "cciss: cmd %p has "
1896                                " completed with errors\n", c);
1897                         if (c->err_info->ScsiStatus) {
1898                                 printk(KERN_WARNING "cciss: cmd %p "
1899                                        "has SCSI Status = %x\n",
1900                                        c, c->err_info->ScsiStatus);
1901                         }
1902
1903                         break;
1904                 case CMD_DATA_UNDERRUN:
1905                 case CMD_DATA_OVERRUN:
1906                         /* expected for inquire and report lun commands */
1907                         break;
1908                 case CMD_INVALID:
1909                         printk(KERN_WARNING "cciss: Cmd %p is "
1910                                "reported invalid\n", c);
1911                         return_status = IO_ERROR;
1912                         break;
1913                 case CMD_PROTOCOL_ERR:
1914                         printk(KERN_WARNING "cciss: cmd %p has "
1915                                "protocol error \n", c);
1916                         return_status = IO_ERROR;
1917                         break;
1918                 case CMD_HARDWARE_ERR:
1919                         printk(KERN_WARNING "cciss: cmd %p had "
1920                                " hardware error\n", c);
1921                         return_status = IO_ERROR;
1922                         break;
1923                 case CMD_CONNECTION_LOST:
1924                         printk(KERN_WARNING "cciss: cmd %p had "
1925                                "connection lost\n", c);
1926                         return_status = IO_ERROR;
1927                         break;
1928                 case CMD_ABORTED:
1929                         printk(KERN_WARNING "cciss: cmd %p was "
1930                                "aborted\n", c);
1931                         return_status = IO_ERROR;
1932                         break;
1933                 case CMD_ABORT_FAILED:
1934                         printk(KERN_WARNING "cciss: cmd %p reports "
1935                                "abort failed\n", c);
1936                         return_status = IO_ERROR;
1937                         break;
1938                 case CMD_UNSOLICITED_ABORT:
1939                         printk(KERN_WARNING
1940                                "cciss%d: unsolicited abort %p\n", ctlr, c);
1941                         if (c->retry_count < MAX_CMD_RETRIES) {
1942                                 printk(KERN_WARNING
1943                                        "cciss%d: retrying %p\n", ctlr, c);
1944                                 c->retry_count++;
1945                                 /* erase the old error information */
1946                                 memset(c->err_info, 0,
1947                                        sizeof(ErrorInfo_struct));
1948                                 return_status = IO_OK;
1949                                 INIT_COMPLETION(wait);
1950                                 goto resend_cmd2;
1951                         }
1952                         return_status = IO_ERROR;
1953                         break;
1954                 default:
1955                         printk(KERN_WARNING "cciss: cmd %p returned "
1956                                "unknown status %x\n", c,
1957                                c->err_info->CommandStatus);
1958                         return_status = IO_ERROR;
1959                 }
1960         }
1961         /* unlock the buffers from DMA */
1962         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
1963         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
1964         pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
1965                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
1966         cmd_free(h, c, 0);
1967         return return_status;
1968 }
1969
1970 static void cciss_geometry_inquiry(int ctlr, int logvol,
1971                                    int withirq, sector_t total_size,
1972                                    unsigned int block_size,
1973                                    InquiryData_struct *inq_buff,
1974                                    drive_info_struct *drv)
1975 {
1976         int return_code;
1977         unsigned long t;
1978
1979         memset(inq_buff, 0, sizeof(InquiryData_struct));
1980         if (withirq)
1981                 return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
1982                                               inq_buff, sizeof(*inq_buff), 1,
1983                                               logvol, 0xC1, TYPE_CMD);
1984         else
1985                 return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
1986                                       sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
1987                                       TYPE_CMD);
1988         if (return_code == IO_OK) {
1989                 if (inq_buff->data_byte[8] == 0xFF) {
1990                         printk(KERN_WARNING
1991                                "cciss: reading geometry failed, volume "
1992                                "does not support reading geometry\n");
1993                         drv->heads = 255;
1994                         drv->sectors = 32;      // Sectors per track
1995                         drv->cylinders = total_size + 1;
1996                         drv->raid_level = RAID_UNKNOWN;
1997                 } else {
1998                         drv->heads = inq_buff->data_byte[6];
1999                         drv->sectors = inq_buff->data_byte[7];
2000                         drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
2001                         drv->cylinders += inq_buff->data_byte[5];
2002                         drv->raid_level = inq_buff->data_byte[8];
2003                 }
2004                 drv->block_size = block_size;
2005                 drv->nr_blocks = total_size + 1;
2006                 t = drv->heads * drv->sectors;
2007                 if (t > 1) {
2008                         sector_t real_size = total_size + 1;
2009                         unsigned long rem = sector_div(real_size, t);
2010                         if (rem)
2011                                 real_size++;
2012                         drv->cylinders = real_size;
2013                 }
2014         } else {                /* Get geometry failed */
2015                 printk(KERN_WARNING "cciss: reading geometry failed\n");
2016         }
2017         printk(KERN_INFO "      heads=%d, sectors=%d, cylinders=%d\n\n",
2018                drv->heads, drv->sectors, drv->cylinders);
2019 }
2020
2021 static void
2022 cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
2023                     unsigned int *block_size)
2024 {
2025         ReadCapdata_struct *buf;
2026         int return_code;
2027
2028         buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
2029         if (!buf) {
2030                 printk(KERN_WARNING "cciss: out of memory\n");
2031                 return;
2032         }
2033
2034         if (withirq)
2035                 return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
2036                                 ctlr, buf, sizeof(ReadCapdata_struct),
2037                                         1, logvol, 0, TYPE_CMD);
2038         else
2039                 return_code = sendcmd(CCISS_READ_CAPACITY,
2040                                 ctlr, buf, sizeof(ReadCapdata_struct),
2041                                         1, logvol, 0, NULL, TYPE_CMD);
2042         if (return_code == IO_OK) {
2043                 *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
2044                 *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
2045         } else {                /* read capacity command failed */
2046                 printk(KERN_WARNING "cciss: read capacity failed\n");
2047                 *total_size = 0;
2048                 *block_size = BLOCK_SIZE;
2049         }
2050         if (*total_size != 0)
2051                 printk(KERN_INFO "      blocks= %llu block_size= %d\n",
2052                 (unsigned long long)*total_size+1, *block_size);
2053         kfree(buf);
2054 }
2055
2056 static void
2057 cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size,                                 unsigned int *block_size)
2058 {
2059         ReadCapdata_struct_16 *buf;
2060         int return_code;
2061
2062         buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
2063         if (!buf) {
2064                 printk(KERN_WARNING "cciss: out of memory\n");
2065                 return;
2066         }
2067
2068         if (withirq) {
2069                 return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
2070                         ctlr, buf, sizeof(ReadCapdata_struct_16),
2071                                 1, logvol, 0, TYPE_CMD);
2072         }
2073         else {
2074                 return_code = sendcmd(CCISS_READ_CAPACITY_16,
2075                         ctlr, buf, sizeof(ReadCapdata_struct_16),
2076                                 1, logvol, 0, NULL, TYPE_CMD);
2077         }
2078         if (return_code == IO_OK) {
2079                 *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
2080                 *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
2081         } else {                /* read capacity command failed */
2082                 printk(KERN_WARNING "cciss: read capacity failed\n");
2083                 *total_size = 0;
2084                 *block_size = BLOCK_SIZE;
2085         }
2086         printk(KERN_INFO "      blocks= %llu block_size= %d\n",
2087                (unsigned long long)*total_size+1, *block_size);
2088         kfree(buf);
2089 }
2090
2091 static int cciss_revalidate(struct gendisk *disk)
2092 {
2093         ctlr_info_t *h = get_host(disk);
2094         drive_info_struct *drv = get_drv(disk);
2095         int logvol;
2096         int FOUND = 0;
2097         unsigned int block_size;
2098         sector_t total_size;
2099         InquiryData_struct *inq_buff = NULL;
2100
2101         for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
2102                 if (h->drv[logvol].LunID == drv->LunID) {
2103                         FOUND = 1;
2104                         break;
2105                 }
2106         }
2107
2108         if (!FOUND)
2109                 return 1;
2110
2111         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
2112         if (inq_buff == NULL) {
2113                 printk(KERN_WARNING "cciss: out of memory\n");
2114                 return 1;
2115         }
2116         if (h->cciss_read == CCISS_READ_10) {
2117                 cciss_read_capacity(h->ctlr, logvol, 1,
2118                                         &total_size, &block_size);
2119         } else {
2120                 cciss_read_capacity_16(h->ctlr, logvol, 1,
2121                                         &total_size, &block_size);
2122         }
2123         cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
2124                                inq_buff, drv);
2125
2126         blk_queue_hardsect_size(drv->queue, drv->block_size);
2127         set_capacity(disk, drv->nr_blocks);
2128
2129         kfree(inq_buff);
2130         return 0;
2131 }
2132
2133 /*
2134  *   Wait polling for a command to complete.
2135  *   The memory mapped FIFO is polled for the completion.
2136  *   Used only at init time, interrupts from the HBA are disabled.
2137  */
2138 static unsigned long pollcomplete(int ctlr)
2139 {
2140         unsigned long done;
2141         int i;
2142
2143         /* Wait (up to 20 seconds) for a command to complete */
2144
2145         for (i = 20 * HZ; i > 0; i--) {
2146                 done = hba[ctlr]->access.command_completed(hba[ctlr]);
2147                 if (done == FIFO_EMPTY)
2148                         schedule_timeout_uninterruptible(1);
2149                 else
2150                         return done;
2151         }
2152         /* Invalid address to tell caller we ran out of time */
2153         return 1;
2154 }
2155
2156 static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
2157 {
2158         /* We get in here if sendcmd() is polling for completions
2159            and gets some command back that it wasn't expecting --
2160            something other than that which it just sent down.
2161            Ordinarily, that shouldn't happen, but it can happen when
2162            the scsi tape stuff gets into error handling mode, and
2163            starts using sendcmd() to try to abort commands and
2164            reset tape drives.  In that case, sendcmd may pick up
2165            completions of commands that were sent to logical drives
2166            through the block i/o system, or cciss ioctls completing, etc.
2167            In that case, we need to save those completions for later
2168            processing by the interrupt handler.
2169          */
2170
2171 #ifdef CONFIG_CISS_SCSI_TAPE
2172         struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
2173
2174         /* If it's not the scsi tape stuff doing error handling, (abort */
2175         /* or reset) then we don't expect anything weird. */
2176         if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
2177 #endif
2178                 printk(KERN_WARNING "cciss cciss%d: SendCmd "
2179                        "Invalid command list address returned! (%lx)\n",
2180                        ctlr, complete);
2181                 /* not much we can do. */
2182 #ifdef CONFIG_CISS_SCSI_TAPE
2183                 return 1;
2184         }
2185
2186         /* We've sent down an abort or reset, but something else
2187            has completed */
2188         if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
2189                 /* Uh oh.  No room to save it for later... */
2190                 printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
2191                        "reject list overflow, command lost!\n", ctlr);
2192                 return 1;
2193         }
2194         /* Save it for later */
2195         srl->complete[srl->ncompletions] = complete;
2196         srl->ncompletions++;
2197 #endif
2198         return 0;
2199 }
2200
2201 /*
2202  * Send a command to the controller, and wait for it to complete.
2203  * Only used at init time.
2204  */
2205 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
2206                                                                                                    1: address logical volume log_unit,
2207                                                                                                    2: periph device address is scsi3addr */
2208                    unsigned int log_unit,
2209                    __u8 page_code, unsigned char *scsi3addr, int cmd_type)
2210 {
2211         CommandList_struct *c;
2212         int i;
2213         unsigned long complete;
2214         ctlr_info_t *info_p = hba[ctlr];
2215         u64bit buff_dma_handle;
2216         int status, done = 0;
2217
2218         if ((c = cmd_alloc(info_p, 1)) == NULL) {
2219                 printk(KERN_WARNING "cciss: unable to get memory");
2220                 return IO_ERROR;
2221         }
2222         status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
2223                           log_unit, page_code, scsi3addr, cmd_type);
2224         if (status != IO_OK) {
2225                 cmd_free(info_p, c, 1);
2226                 return status;
2227         }
2228       resend_cmd1:
2229         /*
2230          * Disable interrupt
2231          */
2232 #ifdef CCISS_DEBUG
2233         printk(KERN_DEBUG "cciss: turning intr off\n");
2234 #endif                          /* CCISS_DEBUG */
2235         info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
2236
2237         /* Make sure there is room in the command FIFO */
2238         /* Actually it should be completely empty at this time */
2239         /* unless we are in here doing error handling for the scsi */
2240         /* tape side of the driver. */
2241         for (i = 200000; i > 0; i--) {
2242                 /* if fifo isn't full go */
2243                 if (!(info_p->access.fifo_full(info_p))) {
2244
2245                         break;
2246                 }
2247                 udelay(10);
2248                 printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
2249                        " waiting!\n", ctlr);
2250         }
2251         /*
2252          * Send the cmd
2253          */
2254         info_p->access.submit_command(info_p, c);
2255         done = 0;
2256         do {
2257                 complete = pollcomplete(ctlr);
2258
2259 #ifdef CCISS_DEBUG
2260                 printk(KERN_DEBUG "cciss: command completed\n");
2261 #endif                          /* CCISS_DEBUG */
2262
2263                 if (complete == 1) {
2264                         printk(KERN_WARNING
2265                                "cciss cciss%d: SendCmd Timeout out, "
2266                                "No command list address returned!\n", ctlr);
2267                         status = IO_ERROR;
2268                         done = 1;
2269                         break;
2270                 }
2271
2272                 /* This will need to change for direct lookup completions */
2273                 if ((complete & CISS_ERROR_BIT)
2274                     && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
2275                         /* if data overrun or underun on Report command
2276                            ignore it
2277                          */
2278                         if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
2279                              (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
2280                              (c->Request.CDB[0] == CISS_INQUIRY)) &&
2281                             ((c->err_info->CommandStatus ==
2282                               CMD_DATA_OVERRUN) ||
2283                              (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
2284                             )) {
2285                                 complete = c->busaddr;
2286                         } else {
2287                                 if (c->err_info->CommandStatus ==
2288                                     CMD_UNSOLICITED_ABORT) {
2289                                         printk(KERN_WARNING "cciss%d: "
2290                                                "unsolicited abort %p\n",
2291                                                ctlr, c);
2292                                         if (c->retry_count < MAX_CMD_RETRIES) {
2293                                                 printk(KERN_WARNING
2294                                                        "cciss%d: retrying %p\n",
2295                                                        ctlr, c);
2296                                                 c->retry_count++;
2297                                                 /* erase the old error */
2298                                                 /* information */
2299                                                 memset(c->err_info, 0,
2300                                                        sizeof
2301                                                        (ErrorInfo_struct));
2302                                                 goto resend_cmd1;
2303                                         } else {
2304                                                 printk(KERN_WARNING
2305                                                        "cciss%d: retried %p too "
2306                                                        "many times\n", ctlr, c);
2307                                                 status = IO_ERROR;
2308                                                 goto cleanup1;
2309                                         }
2310                                 } else if (c->err_info->CommandStatus ==
2311                                            CMD_UNABORTABLE) {
2312                                         printk(KERN_WARNING
2313                                                "cciss%d: command could not be aborted.\n",
2314                                                ctlr);
2315                                         status = IO_ERROR;
2316                                         goto cleanup1;
2317                                 }
2318                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2319                                        " Error %x \n", ctlr,
2320                                        c->err_info->CommandStatus);
2321                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2322                                        " offensive info\n"
2323                                        "  size %x\n   num %x   value %x\n",
2324                                        ctlr,
2325                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2326                                        offense_size,
2327                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2328                                        offense_num,
2329                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2330                                        offense_value);
2331                                 status = IO_ERROR;
2332                                 goto cleanup1;
2333                         }
2334                 }
2335                 /* This will need changing for direct lookup completions */
2336                 if (complete != c->busaddr) {
2337                         if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
2338                                 BUG();  /* we are pretty much hosed if we get here. */
2339                         }
2340                         continue;
2341                 } else
2342                         done = 1;
2343         } while (!done);
2344
2345       cleanup1:
2346         /* unlock the data buffer from DMA */
2347         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
2348         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
2349         pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
2350                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
2351 #ifdef CONFIG_CISS_SCSI_TAPE
2352         /* if we saved some commands for later, process them now. */
2353         if (info_p->scsi_rejects.ncompletions > 0)
2354                 do_cciss_intr(0, info_p);
2355 #endif
2356         cmd_free(info_p, c, 1);
2357         return status;
2358 }
2359
2360 /*
2361  * Map (physical) PCI mem into (virtual) kernel space
2362  */
2363 static void __iomem *remap_pci_mem(ulong base, ulong size)
2364 {
2365         ulong page_base = ((ulong) base) & PAGE_MASK;
2366         ulong page_offs = ((ulong) base) - page_base;
2367         void __iomem *page_remapped = ioremap(page_base, page_offs + size);
2368
2369         return page_remapped ? (page_remapped + page_offs) : NULL;
2370 }
2371
2372 /*
2373  * Takes jobs of the Q and sends them to the hardware, then puts it on
2374  * the Q to wait for completion.
2375  */
2376 static void start_io(ctlr_info_t *h)
2377 {
2378         CommandList_struct *c;
2379
2380         while ((c = h->reqQ) != NULL) {
2381                 /* can't do anything if fifo is full */
2382                 if ((h->access.fifo_full(h))) {
2383                         printk(KERN_WARNING "cciss: fifo full\n");
2384                         break;
2385                 }
2386
2387                 /* Get the first entry from the Request Q */
2388                 removeQ(&(h->reqQ), c);
2389                 h->Qdepth--;
2390
2391                 /* Tell the controller execute command */
2392                 h->access.submit_command(h, c);
2393
2394                 /* Put job onto the completed Q */
2395                 addQ(&(h->cmpQ), c);
2396         }
2397 }
2398
2399 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2400 /* Zeros out the error record and then resends the command back */
2401 /* to the controller */
2402 static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
2403 {
2404         /* erase the old error information */
2405         memset(c->err_info, 0, sizeof(ErrorInfo_struct));
2406
2407         /* add it to software queue and then send it to the controller */
2408         addQ(&(h->reqQ), c);
2409         h->Qdepth++;
2410         if (h->Qdepth > h->maxQsinceinit)
2411                 h->maxQsinceinit = h->Qdepth;
2412
2413         start_io(h);
2414 }
2415
2416 static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
2417         unsigned int msg_byte, unsigned int host_byte,
2418         unsigned int driver_byte)
2419 {
2420         /* inverse of macros in scsi.h */
2421         return (scsi_status_byte & 0xff) |
2422                 ((msg_byte & 0xff) << 8) |
2423                 ((host_byte & 0xff) << 16) |
2424                 ((driver_byte & 0xff) << 24);
2425 }
2426
2427 static inline int evaluate_target_status(CommandList_struct *cmd)
2428 {
2429         unsigned char sense_key;
2430         unsigned char status_byte, msg_byte, host_byte, driver_byte;
2431         int error_value;
2432
2433         /* If we get in here, it means we got "target status", that is, scsi status */
2434         status_byte = cmd->err_info->ScsiStatus;
2435         driver_byte = DRIVER_OK;
2436         msg_byte = cmd->err_info->CommandStatus; /* correct?  seems too device specific */
2437
2438         if (blk_pc_request(cmd->rq))
2439                 host_byte = DID_PASSTHROUGH;
2440         else
2441                 host_byte = DID_OK;
2442
2443         error_value = make_status_bytes(status_byte, msg_byte,
2444                 host_byte, driver_byte);
2445
2446         if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
2447                 if (!blk_pc_request(cmd->rq))
2448                         printk(KERN_WARNING "cciss: cmd %p "
2449                                "has SCSI Status 0x%x\n",
2450                                cmd, cmd->err_info->ScsiStatus);
2451                 return error_value;
2452         }
2453
2454         /* check the sense key */
2455         sense_key = 0xf & cmd->err_info->SenseInfo[2];
2456         /* no status or recovered error */
2457         if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
2458                 error_value = 0;
2459
2460         if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
2461                 if (error_value != 0)
2462                         printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
2463                                " sense key = 0x%x\n", cmd, sense_key);
2464                 return error_value;
2465         }
2466
2467         /* SG_IO or similar, copy sense data back */
2468         if (cmd->rq->sense) {
2469                 if (cmd->rq->sense_len > cmd->err_info->SenseLen)
2470                         cmd->rq->sense_len = cmd->err_info->SenseLen;
2471                 memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
2472                         cmd->rq->sense_len);
2473         } else
2474                 cmd->rq->sense_len = 0;
2475
2476         return error_value;
2477 }
2478
2479 /* checks the status of the job and calls complete buffers to mark all
2480  * buffers for the completed job. Note that this function does not need
2481  * to hold the hba/queue lock.
2482  */
2483 static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
2484                                     int timeout)
2485 {
2486         int retry_cmd = 0;
2487         struct request *rq = cmd->rq;
2488
2489         rq->errors = 0;
2490
2491         if (timeout)
2492                 rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
2493
2494         if (cmd->err_info->CommandStatus == 0)  /* no error has occurred */
2495                 goto after_error_processing;
2496
2497         switch (cmd->err_info->CommandStatus) {
2498         case CMD_TARGET_STATUS:
2499                 rq->errors = evaluate_target_status(cmd);
2500                 break;
2501         case CMD_DATA_UNDERRUN:
2502                 if (blk_fs_request(cmd->rq)) {
2503                         printk(KERN_WARNING "cciss: cmd %p has"
2504                                " completed with data underrun "
2505                                "reported\n", cmd);
2506                         cmd->rq->data_len = cmd->err_info->ResidualCnt;
2507                 }
2508                 break;
2509         case CMD_DATA_OVERRUN:
2510                 if (blk_fs_request(cmd->rq))
2511                         printk(KERN_WARNING "cciss: cmd %p has"
2512                                " completed with data overrun "
2513                                "reported\n", cmd);
2514                 break;
2515         case CMD_INVALID:
2516                 printk(KERN_WARNING "cciss: cmd %p is "
2517                        "reported invalid\n", cmd);
2518                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2519                         cmd->err_info->CommandStatus, DRIVER_OK,
2520                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2521                 break;
2522         case CMD_PROTOCOL_ERR:
2523                 printk(KERN_WARNING "cciss: cmd %p has "
2524                        "protocol error \n", cmd);
2525                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2526                         cmd->err_info->CommandStatus, DRIVER_OK,
2527                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2528                 break;
2529         case CMD_HARDWARE_ERR:
2530                 printk(KERN_WARNING "cciss: cmd %p had "
2531                        " hardware error\n", cmd);
2532                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2533                         cmd->err_info->CommandStatus, DRIVER_OK,
2534                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2535                 break;
2536         case CMD_CONNECTION_LOST:
2537                 printk(KERN_WARNING "cciss: cmd %p had "
2538                        "connection lost\n", cmd);
2539                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2540                         cmd->err_info->CommandStatus, DRIVER_OK,
2541                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2542                 break;
2543         case CMD_ABORTED:
2544                 printk(KERN_WARNING "cciss: cmd %p was "
2545                        "aborted\n", cmd);
2546                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2547                         cmd->err_info->CommandStatus, DRIVER_OK,
2548                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
2549                 break;
2550         case CMD_ABORT_FAILED:
2551                 printk(KERN_WARNING "cciss: cmd %p reports "
2552                        "abort failed\n", cmd);
2553                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2554                         cmd->err_info->CommandStatus, DRIVER_OK,
2555                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2556                 break;
2557         case CMD_UNSOLICITED_ABORT:
2558                 printk(KERN_WARNING "cciss%d: unsolicited "
2559                        "abort %p\n", h->ctlr, cmd);
2560                 if (cmd->retry_count < MAX_CMD_RETRIES) {
2561                         retry_cmd = 1;
2562                         printk(KERN_WARNING
2563                                "cciss%d: retrying %p\n", h->ctlr, cmd);
2564                         cmd->retry_count++;
2565                 } else
2566                         printk(KERN_WARNING
2567                                "cciss%d: %p retried too "
2568                                "many times\n", h->ctlr, cmd);
2569                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2570                         cmd->err_info->CommandStatus, DRIVER_OK,
2571                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
2572                 break;
2573         case CMD_TIMEOUT:
2574                 printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
2575                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2576                         cmd->err_info->CommandStatus, DRIVER_OK,
2577                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2578                 break;
2579         default:
2580                 printk(KERN_WARNING "cciss: cmd %p returned "
2581                        "unknown status %x\n", cmd,
2582                        cmd->err_info->CommandStatus);
2583                 rq->errors = make_status_bytes(SAM_STAT_GOOD,
2584                         cmd->err_info->CommandStatus, DRIVER_OK,
2585                         blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
2586         }
2587
2588 after_error_processing:
2589
2590         /* We need to return this command */
2591         if (retry_cmd) {
2592                 resend_cciss_cmd(h, cmd);
2593                 return;
2594         }
2595         cmd->rq->completion_data = cmd;
2596         blk_complete_request(cmd->rq);
2597 }
2598
2599 /*
2600  * Get a request and submit it to the controller.
2601  */
2602 static void do_cciss_request(struct request_queue *q)
2603 {
2604         ctlr_info_t *h = q->queuedata;
2605         CommandList_struct *c;
2606         sector_t start_blk;
2607         int seg;
2608         struct request *creq;
2609         u64bit temp64;
2610         struct scatterlist tmp_sg[MAXSGENTRIES];
2611         drive_info_struct *drv;
2612         int i, dir;
2613
2614         /* We call start_io here in case there is a command waiting on the
2615          * queue that has not been sent.
2616          */
2617         if (blk_queue_plugged(q))
2618                 goto startio;
2619
2620       queue:
2621         creq = elv_next_request(q);
2622         if (!creq)
2623                 goto startio;
2624
2625         BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
2626
2627         if ((c = cmd_alloc(h, 1)) == NULL)
2628                 goto full;
2629
2630         blkdev_dequeue_request(creq);
2631
2632         spin_unlock_irq(q->queue_lock);
2633
2634         c->cmd_type = CMD_RWREQ;
2635         c->rq = creq;
2636
2637         /* fill in the request */
2638         drv = creq->rq_disk->private_data;
2639         c->Header.ReplyQueue = 0;       // unused in simple mode
2640         /* got command from pool, so use the command block index instead */
2641         /* for direct lookups. */
2642         /* The first 2 bits are reserved for controller error reporting. */
2643         c->Header.Tag.lower = (c->cmdindex << 3);
2644         c->Header.Tag.lower |= 0x04;    /* flag for direct lookup. */
2645         c->Header.LUN.LogDev.VolId = drv->LunID;
2646         c->Header.LUN.LogDev.Mode = 1;
2647         c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
2648         c->Request.Type.Type = TYPE_CMD;        // It is a command.
2649         c->Request.Type.Attribute = ATTR_SIMPLE;
2650         c->Request.Type.Direction =
2651             (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
2652         c->Request.Timeout = 0; // Don't time out
2653         c->Request.CDB[0] =
2654             (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
2655         start_blk = creq->sector;
2656 #ifdef CCISS_DEBUG
2657         printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
2658                (int)creq->nr_sectors);
2659 #endif                          /* CCISS_DEBUG */
2660
2661         sg_init_table(tmp_sg, MAXSGENTRIES);
2662         seg = blk_rq_map_sg(q, creq, tmp_sg);
2663
2664         /* get the DMA records for the setup */
2665         if (c->Request.Type.Direction == XFER_READ)
2666                 dir = PCI_DMA_FROMDEVICE;
2667         else
2668                 dir = PCI_DMA_TODEVICE;
2669
2670         for (i = 0; i < seg; i++) {
2671                 c->SG[i].Len = tmp_sg[i].length;
2672                 temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
2673                                                   tmp_sg[i].offset,
2674                                                   tmp_sg[i].length, dir);
2675                 c->SG[i].Addr.lower = temp64.val32.lower;
2676                 c->SG[i].Addr.upper = temp64.val32.upper;
2677                 c->SG[i].Ext = 0;       // we are not chaining
2678         }
2679         /* track how many SG entries we are using */
2680         if (seg > h->maxSG)
2681                 h->maxSG = seg;
2682
2683 #ifdef CCISS_DEBUG
2684         printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
2685                creq->nr_sectors, seg);
2686 #endif                          /* CCISS_DEBUG */
2687
2688         c->Header.SGList = c->Header.SGTotal = seg;
2689         if (likely(blk_fs_request(creq))) {
2690                 if(h->cciss_read == CCISS_READ_10) {
2691                         c->Request.CDB[1] = 0;
2692                         c->Request.CDB[2] = (start_blk >> 24) & 0xff;   //MSB
2693                         c->Request.CDB[3] = (start_blk >> 16) & 0xff;
2694                         c->Request.CDB[4] = (start_blk >> 8) & 0xff;
2695                         c->Request.CDB[5] = start_blk & 0xff;
2696                         c->Request.CDB[6] = 0;  // (sect >> 24) & 0xff; MSB
2697                         c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
2698                         c->Request.CDB[8] = creq->nr_sectors & 0xff;
2699                         c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
2700                 } else {
2701                         u32 upper32 = upper_32_bits(start_blk);
2702
2703                         c->Request.CDBLen = 16;
2704                         c->Request.CDB[1]= 0;
2705                         c->Request.CDB[2]= (upper32 >> 24) & 0xff;      //MSB
2706                         c->Request.CDB[3]= (upper32 >> 16) & 0xff;
2707                         c->Request.CDB[4]= (upper32 >>  8) & 0xff;
2708                         c->Request.CDB[5]= upper32 & 0xff;
2709                         c->Request.CDB[6]= (start_blk >> 24) & 0xff;
2710                         c->Request.CDB[7]= (start_blk >> 16) & 0xff;
2711                         c->Request.CDB[8]= (start_blk >>  8) & 0xff;
2712                         c->Request.CDB[9]= start_blk & 0xff;
2713                         c->Request.CDB[10]= (creq->nr_sectors >>  24) & 0xff;
2714                         c->Request.CDB[11]= (creq->nr_sectors >>  16) & 0xff;
2715                         c->Request.CDB[12]= (creq->nr_sectors >>  8) & 0xff;
2716                         c->Request.CDB[13]= creq->nr_sectors & 0xff;
2717                         c->Request.CDB[14] = c->Request.CDB[15] = 0;
2718                 }
2719         } else if (blk_pc_request(creq)) {
2720                 c->Request.CDBLen = creq->cmd_len;
2721                 memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
2722         } else {
2723                 printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
2724                 BUG();
2725         }
2726
2727         spin_lock_irq(q->queue_lock);
2728
2729         addQ(&(h->reqQ), c);
2730         h->Qdepth++;
2731         if (h->Qdepth > h->maxQsinceinit)
2732                 h->maxQsinceinit = h->Qdepth;
2733
2734         goto queue;
2735 full:
2736         blk_stop_queue(q);
2737 startio:
2738         /* We will already have the driver lock here so not need
2739          * to lock it.
2740          */
2741         start_io(h);
2742 }
2743
2744 static inline unsigned long get_next_completion(ctlr_info_t *h)
2745 {
2746 #ifdef CONFIG_CISS_SCSI_TAPE
2747         /* Any rejects from sendcmd() lying around? Process them first */
2748         if (h->scsi_rejects.ncompletions == 0)
2749                 return h->access.command_completed(h);
2750         else {
2751                 struct sendcmd_reject_list *srl;
2752                 int n;
2753                 srl = &h->scsi_rejects;
2754                 n = --srl->ncompletions;
2755                 /* printk("cciss%d: processing saved reject\n", h->ctlr); */
2756                 printk("p");
2757                 return srl->complete[n];
2758         }
2759 #else
2760         return h->access.command_completed(h);
2761 #endif
2762 }
2763
2764 static inline int interrupt_pending(ctlr_info_t *h)
2765 {
2766 #ifdef CONFIG_CISS_SCSI_TAPE
2767         return (h->access.intr_pending(h)
2768                 || (h->scsi_rejects.ncompletions > 0));
2769 #else
2770         return h->access.intr_pending(h);
2771 #endif
2772 }
2773
2774 static inline long interrupt_not_for_us(ctlr_info_t *h)
2775 {
2776 #ifdef CONFIG_CISS_SCSI_TAPE
2777         return (((h->access.intr_pending(h) == 0) ||
2778                  (h->interrupts_enabled == 0))
2779                 && (h->scsi_rejects.ncompletions == 0));
2780 #else
2781         return (((h->access.intr_pending(h) == 0) ||
2782                  (h->interrupts_enabled == 0)));
2783 #endif
2784 }
2785
2786 static irqreturn_t do_cciss_intr(int irq, void *dev_id)
2787 {
2788         ctlr_info_t *h = dev_id;
2789         CommandList_struct *c;
2790         unsigned long flags;
2791         __u32 a, a1, a2;
2792
2793         if (interrupt_not_for_us(h))
2794                 return IRQ_NONE;
2795         /*
2796          * If there are completed commands in the completion queue,
2797          * we had better do something about it.
2798          */
2799         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
2800         while (interrupt_pending(h)) {
2801                 while ((a = get_next_completion(h)) != FIFO_EMPTY) {
2802                         a1 = a;
2803                         if ((a & 0x04)) {
2804                                 a2 = (a >> 3);
2805                                 if (a2 >= h->nr_cmds) {
2806                                         printk(KERN_WARNING
2807                                                "cciss: controller cciss%d failed, stopping.\n",
2808                                                h->ctlr);
2809                                         fail_all_cmds(h->ctlr);
2810                                         return IRQ_HANDLED;
2811                                 }
2812
2813                                 c = h->cmd_pool + a2;
2814                                 a = c->busaddr;
2815
2816                         } else {
2817                                 a &= ~3;
2818                                 if ((c = h->cmpQ) == NULL) {
2819                                         printk(KERN_WARNING
2820                                                "cciss: Completion of %08x ignored\n",
2821                                                a1);
2822                                         continue;
2823                                 }
2824                                 while (c->busaddr != a) {
2825                                         c = c->next;
2826                                         if (c == h->cmpQ)
2827                                                 break;
2828                                 }
2829                         }
2830                         /*
2831                          * If we've found the command, take it off the
2832                          * completion Q and free it
2833                          */
2834                         if (c->busaddr == a) {
2835                                 removeQ(&h->cmpQ, c);
2836                                 if (c->cmd_type == CMD_RWREQ) {
2837                                         complete_command(h, c, 0);
2838                                 } else if (c->cmd_type == CMD_IOCTL_PEND) {
2839                                         complete(c->waiting);
2840                                 }
2841 #                               ifdef CONFIG_CISS_SCSI_TAPE
2842                                 else if (c->cmd_type == CMD_SCSI)
2843                                         complete_scsi_command(c, 0, a1);
2844 #                               endif
2845                                 continue;
2846                         }
2847                 }
2848         }
2849
2850         spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
2851         return IRQ_HANDLED;
2852 }
2853
2854 /*
2855  *  We cannot read the structure directly, for portability we must use
2856  *   the io functions.
2857  *   This is for debug only.
2858  */
2859 #ifdef CCISS_DEBUG
2860 static void print_cfg_table(CfgTable_struct *tb)
2861 {
2862         int i;
2863         char temp_name[17];
2864
2865         printk("Controller Configuration information\n");
2866         printk("------------------------------------\n");
2867         for (i = 0; i < 4; i++)
2868                 temp_name[i] = readb(&(tb->Signature[i]));
2869         temp_name[4] = '\0';
2870         printk("   Signature = %s\n", temp_name);
2871         printk("   Spec Number = %d\n", readl(&(tb->SpecValence)));
2872         printk("   Transport methods supported = 0x%x\n",
2873                readl(&(tb->TransportSupport)));
2874         printk("   Transport methods active = 0x%x\n",
2875                readl(&(tb->TransportActive)));
2876         printk("   Requested transport Method = 0x%x\n",
2877                readl(&(tb->HostWrite.TransportRequest)));
2878         printk("   Coalesce Interrupt Delay = 0x%x\n",
2879                readl(&(tb->HostWrite.CoalIntDelay)));
2880         printk("   Coalesce Interrupt Count = 0x%x\n",
2881                readl(&(tb->HostWrite.CoalIntCount)));
2882         printk("   Max outstanding commands = 0x%d\n",
2883                readl(&(tb->CmdsOutMax)));
2884         printk("   Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
2885         for (i = 0; i < 16; i++)
2886                 temp_name[i] = readb(&(tb->ServerName[i]));
2887         temp_name[16] = '\0';
2888         printk("   Server Name = %s\n", temp_name);
2889         printk("   Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
2890 }
2891 #endif                          /* CCISS_DEBUG */
2892
2893 static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
2894 {
2895         int i, offset, mem_type, bar_type;
2896         if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
2897                 return 0;
2898         offset = 0;
2899         for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
2900                 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
2901                 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
2902                         offset += 4;
2903                 else {
2904                         mem_type = pci_resource_flags(pdev, i) &
2905                             PCI_BASE_ADDRESS_MEM_TYPE_MASK;
2906                         switch (mem_type) {
2907                         case PCI_BASE_ADDRESS_MEM_TYPE_32:
2908                         case PCI_BASE_ADDRESS_MEM_TYPE_1M:
2909                                 offset += 4;    /* 32 bit */
2910                                 break;
2911                         case PCI_BASE_ADDRESS_MEM_TYPE_64:
2912                                 offset += 8;
2913                                 break;
2914                         default:        /* reserved in PCI 2.2 */
2915                                 printk(KERN_WARNING
2916                                        "Base address is invalid\n");
2917                                 return -1;
2918                                 break;
2919                         }
2920                 }
2921                 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
2922                         return i + 1;
2923         }
2924         return -1;
2925 }
2926
2927 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
2928  * controllers that are capable. If not, we use IO-APIC mode.
2929  */
2930
2931 static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
2932                                            struct pci_dev *pdev, __u32 board_id)
2933 {
2934 #ifdef CONFIG_PCI_MSI
2935         int err;
2936         struct msix_entry cciss_msix_entries[4] = { {0, 0}, {0, 1},
2937         {0, 2}, {0, 3}
2938         };
2939
2940         /* Some boards advertise MSI but don't really support it */
2941         if ((board_id == 0x40700E11) ||
2942             (board_id == 0x40800E11) ||
2943             (board_id == 0x40820E11) || (board_id == 0x40830E11))
2944                 goto default_int_mode;
2945
2946         if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
2947                 err = pci_enable_msix(pdev, cciss_msix_entries, 4);
2948                 if (!err) {
2949                         c->intr[0] = cciss_msix_entries[0].vector;
2950                         c->intr[1] = cciss_msix_entries[1].vector;
2951                         c->intr[2] = cciss_msix_entries[2].vector;
2952                         c->intr[3] = cciss_msix_entries[3].vector;
2953                         c->msix_vector = 1;
2954                         return;
2955                 }
2956                 if (err > 0) {
2957                         printk(KERN_WARNING "cciss: only %d MSI-X vectors "
2958                                "available\n", err);
2959                         goto default_int_mode;
2960                 } else {
2961                         printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
2962                                err);
2963                         goto default_int_mode;
2964                 }
2965         }
2966         if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
2967                 if (!pci_enable_msi(pdev)) {
2968                         c->msi_vector = 1;
2969                 } else {
2970                         printk(KERN_WARNING "cciss: MSI init failed\n");
2971                 }
2972         }
2973 default_int_mode:
2974 #endif                          /* CONFIG_PCI_MSI */
2975         /* if we get here we're going to use the default interrupt mode */
2976         c->intr[SIMPLE_MODE_INT] = pdev->irq;
2977         return;
2978 }
2979
2980 static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
2981 {
2982         ushort subsystem_vendor_id, subsystem_device_id, command;
2983         __u32 board_id, scratchpad = 0;
2984         __u64 cfg_offset;
2985         __u32 cfg_base_addr;
2986         __u64 cfg_base_addr_index;
2987         int i, err;
2988
2989         /* check to see if controller has been disabled */
2990         /* BEFORE trying to enable it */
2991         (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
2992         if (!(command & 0x02)) {
2993                 printk(KERN_WARNING
2994                        "cciss: controller appears to be disabled\n");
2995                 return -ENODEV;
2996         }
2997
2998         err = pci_enable_device(pdev);
2999         if (err) {
3000                 printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
3001                 return err;
3002         }
3003
3004         err = pci_request_regions(pdev, "cciss");
3005         if (err) {
3006                 printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
3007                        "aborting\n");
3008                 return err;
3009         }
3010
3011         subsystem_vendor_id = pdev->subsystem_vendor;
3012         subsystem_device_id = pdev->subsystem_device;
3013         board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
3014                     subsystem_vendor_id);
3015
3016 #ifdef CCISS_DEBUG
3017         printk("command = %x\n", command);
3018         printk("irq = %x\n", pdev->irq);
3019         printk("board_id = %x\n", board_id);
3020 #endif                          /* CCISS_DEBUG */
3021
3022 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
3023  * else we use the IO-APIC interrupt assigned to us by system ROM.
3024  */
3025         cciss_interrupt_mode(c, pdev, board_id);
3026
3027         /*
3028          * Memory base addr is first addr , the second points to the config
3029          *   table
3030          */
3031
3032         c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
3033 #ifdef CCISS_DEBUG
3034         printk("address 0 = %x\n", c->paddr);
3035 #endif                          /* CCISS_DEBUG */
3036         c->vaddr = remap_pci_mem(c->paddr, 0x250);
3037
3038         /* Wait for the board to become ready.  (PCI hotplug needs this.)
3039          * We poll for up to 120 secs, once per 100ms. */
3040         for (i = 0; i < 1200; i++) {
3041                 scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
3042                 if (scratchpad == CCISS_FIRMWARE_READY)
3043                         break;
3044                 set_current_state(TASK_INTERRUPTIBLE);
3045                 schedule_timeout(HZ / 10);      /* wait 100ms */
3046         }
3047         if (scratchpad != CCISS_FIRMWARE_READY) {
3048                 printk(KERN_WARNING "cciss: Board not ready.  Timed out.\n");
3049                 err = -ENODEV;
3050                 goto err_out_free_res;
3051         }
3052
3053         /* get the address index number */
3054         cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
3055         cfg_base_addr &= (__u32) 0x0000ffff;
3056 #ifdef CCISS_DEBUG
3057         printk("cfg base address = %x\n", cfg_base_addr);
3058 #endif                          /* CCISS_DEBUG */
3059         cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
3060 #ifdef CCISS_DEBUG
3061         printk("cfg base address index = %x\n", cfg_base_addr_index);
3062 #endif                          /* CCISS_DEBUG */
3063         if (cfg_base_addr_index == -1) {
3064                 printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
3065                 err = -ENODEV;
3066                 goto err_out_free_res;
3067         }
3068
3069         cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
3070 #ifdef CCISS_DEBUG
3071         printk("cfg offset = %x\n", cfg_offset);
3072 #endif                          /* CCISS_DEBUG */
3073         c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
3074                                                        cfg_base_addr_index) +
3075                                     cfg_offset, sizeof(CfgTable_struct));
3076         c->board_id = board_id;
3077
3078 #ifdef CCISS_DEBUG
3079         print_cfg_table(c->cfgtable);
3080 #endif                          /* CCISS_DEBUG */
3081
3082         for (i = 0; i < ARRAY_SIZE(products); i++) {
3083                 if (board_id == products[i].board_id) {
3084                         c->product_name = products[i].product_name;
3085                         c->access = *(products[i].access);
3086                         c->nr_cmds = products[i].nr_cmds;
3087                         break;
3088                 }
3089         }
3090         if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
3091             (readb(&c->cfgtable->Signature[1]) != 'I') ||
3092             (readb(&c->cfgtable->Signature[2]) != 'S') ||
3093             (readb(&c->cfgtable->Signature[3]) != 'S')) {
3094                 printk("Does not appear to be a valid CISS config table\n");
3095                 err = -ENODEV;
3096                 goto err_out_free_res;
3097         }
3098         /* We didn't find the controller in our list. We know the
3099          * signature is valid. If it's an HP device let's try to
3100          * bind to the device and fire it up. Otherwise we bail.
3101          */
3102         if (i == ARRAY_SIZE(products)) {
3103                 if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
3104                         c->product_name = products[i-1].product_name;
3105                         c->access = *(products[i-1].access);
3106                         c->nr_cmds = products[i-1].nr_cmds;
3107                         printk(KERN_WARNING "cciss: This is an unknown "
3108                                 "Smart Array controller.\n"
3109                                 "cciss: Please update to the latest driver "
3110                                 "available from www.hp.com.\n");
3111                 } else {
3112                         printk(KERN_WARNING "cciss: Sorry, I don't know how"
3113                                 " to access the Smart Array controller %08lx\n"
3114                                         , (unsigned long)board_id);
3115                         err = -ENODEV;
3116                         goto err_out_free_res;
3117                 }
3118         }
3119 #ifdef CONFIG_X86
3120         {
3121                 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3122                 __u32 prefetch;
3123                 prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
3124                 prefetch |= 0x100;
3125                 writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
3126         }
3127 #endif
3128
3129         /* Disabling DMA prefetch and refetch for the P600.
3130          * An ASIC bug may result in accesses to invalid memory addresses.
3131          * We've disabled prefetch for some time now. Testing with XEN
3132          * kernels revealed a bug in the refetch if dom0 resides on a P600.
3133          */
3134         if(board_id == 0x3225103C) {
3135                 __u32 dma_prefetch;
3136                 __u32 dma_refetch;
3137                 dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
3138                 dma_prefetch |= 0x8000;
3139                 writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
3140                 pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
3141                 dma_refetch |= 0x1;
3142                 pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
3143         }
3144
3145 #ifdef CCISS_DEBUG
3146         printk("Trying to put board into Simple mode\n");
3147 #endif                          /* CCISS_DEBUG */
3148         c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
3149         /* Update the field, and then ring the doorbell */
3150         writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
3151         writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
3152
3153         /* under certain very rare conditions, this can take awhile.
3154          * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3155          * as we enter this code.) */
3156         for (i = 0; i < MAX_CONFIG_WAIT; i++) {
3157                 if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
3158                         break;
3159                 /* delay and try again */
3160                 set_current_state(TASK_INTERRUPTIBLE);
3161                 schedule_timeout(10);
3162         }
3163
3164 #ifdef CCISS_DEBUG
3165         printk(KERN_DEBUG "I counter got to %d %x\n", i,
3166                readl(c->vaddr + SA5_DOORBELL));
3167 #endif                          /* CCISS_DEBUG */
3168 #ifdef CCISS_DEBUG
3169         print_cfg_table(c->cfgtable);
3170 #endif                          /* CCISS_DEBUG */
3171
3172         if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
3173                 printk(KERN_WARNING "cciss: unable to get board into"
3174                        " simple mode\n");
3175                 err = -ENODEV;
3176                 goto err_out_free_res;
3177         }
3178         return 0;
3179
3180 err_out_free_res:
3181         /*
3182          * Deliberately omit pci_disable_device(): it does something nasty to
3183          * Smart Array controllers that pci_enable_device does not undo
3184          */
3185         pci_release_regions(pdev);
3186         return err;
3187 }
3188
3189 /*
3190  * Gets information about the local volumes attached to the controller.
3191  */
3192 static void cciss_getgeometry(int cntl_num)
3193 {
3194         ReportLunData_struct *ld_buff;
3195         InquiryData_struct *inq_buff;
3196         int return_code;
3197         int i;
3198         int listlength = 0;
3199         __u32 lunid = 0;
3200         unsigned block_size;
3201         sector_t total_size;
3202
3203         ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
3204         if (ld_buff == NULL) {
3205                 printk(KERN_ERR "cciss: out of memory\n");
3206                 return;
3207         }
3208         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
3209         if (inq_buff == NULL) {
3210                 printk(KERN_ERR "cciss: out of memory\n");
3211                 kfree(ld_buff);
3212                 return;
3213         }
3214         /* Get the firmware version */
3215         return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
3216                               sizeof(InquiryData_struct), 0, 0, 0, NULL,
3217                               TYPE_CMD);
3218         if (return_code == IO_OK) {
3219                 hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
3220                 hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
3221                 hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
3222                 hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
3223         } else {                /* send command failed */
3224
3225                 printk(KERN_WARNING "cciss: unable to determine firmware"
3226                        " version of controller\n");
3227         }
3228         /* Get the number of logical volumes */
3229         return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
3230                               sizeof(ReportLunData_struct), 0, 0, 0, NULL,
3231                               TYPE_CMD);
3232
3233         if (return_code == IO_OK) {
3234 #ifdef CCISS_DEBUG
3235                 printk("LUN Data\n--------------------------\n");
3236 #endif                          /* CCISS_DEBUG */
3237
3238                 listlength |=
3239                     (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
3240                 listlength |=
3241                     (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
3242                 listlength |=
3243                     (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
3244                 listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
3245         } else {                /* reading number of logical volumes failed */
3246
3247                 printk(KERN_WARNING "cciss: report logical volume"
3248                        " command failed\n");
3249                 listlength = 0;
3250         }
3251         hba[cntl_num]->num_luns = listlength / 8;       // 8 bytes pre entry
3252         if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
3253                 printk(KERN_ERR
3254                        "ciss:  only %d number of logical volumes supported\n",
3255                        CISS_MAX_LUN);
3256                 hba[cntl_num]->num_luns = CISS_MAX_LUN;
3257         }
3258 #ifdef CCISS_DEBUG
3259         printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
3260                ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
3261                ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
3262                hba[cntl_num]->num_luns);
3263 #endif                          /* CCISS_DEBUG */
3264
3265         hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
3266         for (i = 0; i < CISS_MAX_LUN; i++) {
3267                 if (i < hba[cntl_num]->num_luns) {
3268                         lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
3269                             << 24;
3270                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
3271                             << 16;
3272                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
3273                             << 8;
3274                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
3275
3276                         hba[cntl_num]->drv[i].LunID = lunid;
3277
3278 #ifdef CCISS_DEBUG
3279                         printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i,
3280                                ld_buff->LUN[i][0], ld_buff->LUN[i][1],
3281                                ld_buff->LUN[i][2], ld_buff->LUN[i][3],
3282                                hba[cntl_num]->drv[i].LunID);
3283 #endif                          /* CCISS_DEBUG */
3284
3285                 /* testing to see if 16-byte CDBs are already being used */
3286                 if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
3287                         cciss_read_capacity_16(cntl_num, i, 0,
3288                                             &total_size, &block_size);
3289                         goto geo_inq;
3290                 }
3291                 cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
3292
3293                 /* If read_capacity returns all F's the logical is >2TB */
3294                 /* so we switch to 16-byte CDBs for all read/write ops */
3295                 if(total_size == 0xFFFFFFFFULL) {
3296                         cciss_read_capacity_16(cntl_num, i, 0,
3297                         &total_size, &block_size);
3298                         hba[cntl_num]->cciss_read = CCISS_READ_16;
3299                         hba[cntl_num]->cciss_write = CCISS_WRITE_16;
3300                 } else {
3301                         hba[cntl_num]->cciss_read = CCISS_READ_10;
3302                         hba[cntl_num]->cciss_write = CCISS_WRITE_10;
3303                 }
3304 geo_inq:
3305                         cciss_geometry_inquiry(cntl_num, i, 0, total_size,
3306                                                block_size, inq_buff,
3307                                                &hba[cntl_num]->drv[i]);
3308                 } else {
3309                         /* initialize raid_level to indicate a free space */
3310                         hba[cntl_num]->drv[i].raid_level = -1;
3311                 }
3312         }
3313         kfree(ld_buff);
3314         kfree(inq_buff);
3315 }
3316
3317 /* Function to find the first free pointer into our hba[] array */
3318 /* Returns -1 if no free entries are left.  */
3319 static int alloc_cciss_hba(void)
3320 {
3321         int i;
3322
3323         for (i = 0; i < MAX_CTLR; i++) {
3324                 if (!hba[i]) {
3325                         ctlr_info_t *p;
3326
3327                         p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
3328                         if (!p)
3329                                 goto Enomem;
3330                         p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
3331                         if (!p->gendisk[0]) {
3332                                 kfree(p);
3333                                 goto Enomem;
3334                         }
3335                         hba[i] = p;
3336                         return i;
3337                 }
3338         }
3339         printk(KERN_WARNING "cciss: This driver supports a maximum"
3340                " of %d controllers.\n", MAX_CTLR);
3341         return -1;
3342 Enomem:
3343         printk(KERN_ERR "cciss: out of memory.\n");
3344         return -1;
3345 }
3346
3347 static void free_hba(int i)
3348 {
3349         ctlr_info_t *p = hba[i];
3350         int n;
3351
3352         hba[i] = NULL;
3353         for (n = 0; n < CISS_MAX_LUN; n++)
3354                 put_disk(p->gendisk[n]);
3355         kfree(p);
3356 }
3357
3358 /*
3359  *  This is it.  Find all the controllers and register them.  I really hate
3360  *  stealing all these major device numbers.
3361  *  returns the number of block devices registered.
3362  */
3363 static int __devinit cciss_init_one(struct pci_dev *pdev,
3364                                     const struct pci_device_id *ent)
3365 {
3366         int i;
3367         int j = 0;
3368         int rc;
3369         int dac;
3370
3371         i = alloc_cciss_hba();
3372         if (i < 0)
3373                 return -1;
3374
3375         hba[i]->busy_initializing = 1;
3376
3377         if (cciss_pci_init(hba[i], pdev) != 0)
3378                 goto clean1;
3379
3380         sprintf(hba[i]->devname, "cciss%d", i);
3381         hba[i]->ctlr = i;
3382         hba[i]->pdev = pdev;
3383
3384         /* configure PCI DMA stuff */
3385         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
3386                 dac = 1;
3387         else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
3388                 dac = 0;
3389         else {
3390                 printk(KERN_ERR "cciss: no suitable DMA available\n");
3391                 goto clean1;
3392         }
3393
3394         /*
3395          * register with the major number, or get a dynamic major number
3396          * by passing 0 as argument.  This is done for greater than
3397          * 8 controller support.
3398          */
3399         if (i < MAX_CTLR_ORIG)
3400                 hba[i]->major = COMPAQ_CISS_MAJOR + i;
3401         rc = register_blkdev(hba[i]->major, hba[i]->devname);
3402         if (rc == -EBUSY || rc == -EINVAL) {
3403                 printk(KERN_ERR
3404                        "cciss:  Unable to get major number %d for %s "
3405                        "on hba %d\n", hba[i]->major, hba[i]->devname, i);
3406                 goto clean1;
3407         } else {
3408                 if (i >= MAX_CTLR_ORIG)
3409                         hba[i]->major = rc;
3410         }
3411
3412         /* make sure the board interrupts are off */
3413         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
3414         if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
3415                         IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
3416                 printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
3417                        hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
3418                 goto clean2;
3419         }
3420
3421         printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
3422                hba[i]->devname, pdev->device, pci_name(pdev),
3423                hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
3424
3425         hba[i]->cmd_pool_bits =
3426             kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
3427                       1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
3428         hba[i]->cmd_pool = (CommandList_struct *)
3429             pci_alloc_consistent(hba[i]->pdev,
3430                     hba[i]->nr_cmds * sizeof(CommandList_struct),
3431                     &(hba[i]->cmd_pool_dhandle));
3432         hba[i]->errinfo_pool = (ErrorInfo_struct *)
3433             pci_alloc_consistent(hba[i]->pdev,
3434                     hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3435                     &(hba[i]->errinfo_pool_dhandle));
3436         if ((hba[i]->cmd_pool_bits == NULL)
3437             || (hba[i]->cmd_pool == NULL)
3438             || (hba[i]->errinfo_pool == NULL)) {
3439                 printk(KERN_ERR "cciss: out of memory");
3440                 goto clean4;
3441         }
3442 #ifdef CONFIG_CISS_SCSI_TAPE
3443         hba[i]->scsi_rejects.complete =
3444             kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
3445                     (hba[i]->nr_cmds + 5), GFP_KERNEL);
3446         if (hba[i]->scsi_rejects.complete == NULL) {
3447                 printk(KERN_ERR "cciss: out of memory");
3448                 goto clean4;
3449         }
3450 #endif
3451         spin_lock_init(&hba[i]->lock);
3452
3453         /* Initialize the pdev driver private data.
3454            have it point to hba[i].  */
3455         pci_set_drvdata(pdev, hba[i]);
3456         /* command and error info recs zeroed out before
3457            they are used */
3458         memset(hba[i]->cmd_pool_bits, 0,
3459                ((hba[i]->nr_cmds + BITS_PER_LONG -
3460                  1) / BITS_PER_LONG) * sizeof(unsigned long));
3461
3462 #ifdef CCISS_DEBUG
3463         printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
3464 #endif                          /* CCISS_DEBUG */
3465
3466         cciss_getgeometry(i);
3467
3468         cciss_scsi_setup(i);
3469
3470         /* Turn the interrupts on so we can service requests */
3471         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
3472
3473         cciss_procinit(i);
3474
3475         hba[i]->cciss_max_sectors = 2048;
3476
3477         hba[i]->busy_initializing = 0;
3478
3479         do {
3480                 drive_info_struct *drv = &(hba[i]->drv[j]);
3481                 struct gendisk *disk = hba[i]->gendisk[j];
3482                 struct request_queue *q;
3483
3484                 /* Check if the disk was allocated already */
3485                 if (!disk){
3486                         hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
3487                         disk = hba[i]->gendisk[j];
3488                 }
3489
3490                 /* Check that the disk was able to be allocated */
3491                 if (!disk) {
3492                         printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
3493                         goto clean4;
3494                 }
3495
3496                 q = blk_init_queue(do_cciss_request, &hba[i]->lock);
3497                 if (!q) {
3498                         printk(KERN_ERR
3499                                "cciss:  unable to allocate queue for disk %d\n",
3500                                j);
3501                         goto clean4;
3502                 }
3503                 drv->queue = q;
3504
3505                 blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
3506
3507                 /* This is a hardware imposed limit. */
3508                 blk_queue_max_hw_segments(q, MAXSGENTRIES);
3509
3510                 /* This is a limit in the driver and could be eliminated. */
3511                 blk_queue_max_phys_segments(q, MAXSGENTRIES);
3512
3513                 blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
3514
3515                 blk_queue_softirq_done(q, cciss_softirq_done);
3516
3517                 q->queuedata = hba[i];
3518                 sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
3519                 disk->major = hba[i]->major;
3520                 disk->first_minor = j << NWD_SHIFT;
3521                 disk->fops = &cciss_fops;
3522                 disk->queue = q;
3523                 disk->private_data = drv;
3524                 disk->driverfs_dev = &pdev->dev;
3525                 /* we must register the controller even if no disks exist */
3526                 /* this is for the online array utilities */
3527                 if (!drv->heads && j)
3528                         continue;
3529                 blk_queue_hardsect_size(q, drv->block_size);
3530                 set_capacity(disk, drv->nr_blocks);
3531                 j++;
3532         } while (j <= hba[i]->highest_lun);
3533
3534         /* Make sure all queue data is written out before */
3535         /* interrupt handler, triggered by add_disk,  */
3536         /* is allowed to start them. */
3537         wmb();
3538
3539         for (j = 0; j <= hba[i]->highest_lun; j++)
3540                 add_disk(hba[i]->gendisk[j]);
3541
3542         return 1;
3543
3544       clean4:
3545 #ifdef CONFIG_CISS_SCSI_TAPE
3546         kfree(hba[i]->scsi_rejects.complete);
3547 #endif
3548         kfree(hba[i]->cmd_pool_bits);
3549         if (hba[i]->cmd_pool)
3550                 pci_free_consistent(hba[i]->pdev,
3551                                     hba[i]->nr_cmds * sizeof(CommandList_struct),
3552                                     hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3553         if (hba[i]->errinfo_pool)
3554                 pci_free_consistent(hba[i]->pdev,
3555                                     hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3556                                     hba[i]->errinfo_pool,
3557                                     hba[i]->errinfo_pool_dhandle);
3558         free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
3559       clean2:
3560         unregister_blkdev(hba[i]->major, hba[i]->devname);
3561       clean1:
3562         hba[i]->busy_initializing = 0;
3563         /* cleanup any queues that may have been initialized */
3564         for (j=0; j <= hba[i]->highest_lun; j++){
3565                 drive_info_struct *drv = &(hba[i]->drv[j]);
3566                 if (drv->queue)
3567                         blk_cleanup_queue(drv->queue);
3568         }
3569         /*
3570          * Deliberately omit pci_disable_device(): it does something nasty to
3571          * Smart Array controllers that pci_enable_device does not undo
3572          */
3573         pci_release_regions(pdev);
3574         pci_set_drvdata(pdev, NULL);
3575         free_hba(i);
3576         return -1;
3577 }
3578
3579 static void cciss_shutdown(struct pci_dev *pdev)
3580 {
3581         ctlr_info_t *tmp_ptr;
3582         int i;
3583         char flush_buf[4];
3584         int return_code;
3585
3586         tmp_ptr = pci_get_drvdata(pdev);
3587         if (tmp_ptr == NULL)
3588                 return;
3589         i = tmp_ptr->ctlr;
3590         if (hba[i] == NULL)
3591                 return;
3592
3593         /* Turn board interrupts off  and send the flush cache command */
3594         /* sendcmd will turn off interrupt, and send the flush...
3595          * To write all data in the battery backed cache to disks */
3596         memset(flush_buf, 0, 4);
3597         return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
3598                               TYPE_CMD);
3599         if (return_code == IO_OK) {
3600                 printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
3601         } else {
3602                 printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
3603         }
3604         free_irq(hba[i]->intr[2], hba[i]);
3605 }
3606
3607 static void __devexit cciss_remove_one(struct pci_dev *pdev)
3608 {
3609         ctlr_info_t *tmp_ptr;
3610         int i, j;
3611
3612         if (pci_get_drvdata(pdev) == NULL) {
3613                 printk(KERN_ERR "cciss: Unable to remove device \n");
3614                 return;
3615         }
3616         tmp_ptr = pci_get_drvdata(pdev);
3617         i = tmp_ptr->ctlr;
3618         if (hba[i] == NULL) {
3619                 printk(KERN_ERR "cciss: device appears to "
3620                        "already be removed \n");
3621                 return;
3622         }
3623
3624         remove_proc_entry(hba[i]->devname, proc_cciss);
3625         unregister_blkdev(hba[i]->major, hba[i]->devname);
3626
3627         /* remove it from the disk list */
3628         for (j = 0; j < CISS_MAX_LUN; j++) {
3629                 struct gendisk *disk = hba[i]->gendisk[j];
3630                 if (disk) {
3631                         struct request_queue *q = disk->queue;
3632
3633                         if (disk->flags & GENHD_FL_UP)
3634                                 del_gendisk(disk);
3635                         if (q)
3636                                 blk_cleanup_queue(q);
3637                 }
3638         }
3639
3640         cciss_unregister_scsi(i);       /* unhook from SCSI subsystem */
3641
3642         cciss_shutdown(pdev);
3643
3644 #ifdef CONFIG_PCI_MSI
3645         if (hba[i]->msix_vector)
3646                 pci_disable_msix(hba[i]->pdev);
3647         else if (hba[i]->msi_vector)
3648                 pci_disable_msi(hba[i]->pdev);
3649 #endif                          /* CONFIG_PCI_MSI */
3650
3651         iounmap(hba[i]->vaddr);
3652
3653         pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
3654                             hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3655         pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3656                             hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
3657         kfree(hba[i]->cmd_pool_bits);
3658 #ifdef CONFIG_CISS_SCSI_TAPE
3659         kfree(hba[i]->scsi_rejects.complete);
3660 #endif
3661         /*
3662          * Deliberately omit pci_disable_device(): it does something nasty to
3663          * Smart Array controllers that pci_enable_device does not undo
3664          */
3665         pci_release_regions(pdev);
3666         pci_set_drvdata(pdev, NULL);
3667         free_hba(i);
3668 }
3669
3670 static struct pci_driver cciss_pci_driver = {
3671         .name = "cciss",
3672         .probe = cciss_init_one,
3673         .remove = __devexit_p(cciss_remove_one),
3674         .id_table = cciss_pci_device_id,        /* id_table */
3675         .shutdown = cciss_shutdown,
3676 };
3677
3678 /*
3679  *  This is it.  Register the PCI driver information for the cards we control
3680  *  the OS will call our registered routines when it finds one of our cards.
3681  */
3682 static int __init cciss_init(void)
3683 {
3684         printk(KERN_INFO DRIVER_NAME "\n");
3685
3686         /* Register for our PCI devices */
3687         return pci_register_driver(&cciss_pci_driver);
3688 }
3689
3690 static void __exit cciss_cleanup(void)
3691 {
3692         int i;
3693
3694         pci_unregister_driver(&cciss_pci_driver);
3695         /* double check that all controller entrys have been removed */
3696         for (i = 0; i < MAX_CTLR; i++) {
3697                 if (hba[i] != NULL) {
3698                         printk(KERN_WARNING "cciss: had to remove"
3699                                " controller %d\n", i);
3700                         cciss_remove_one(hba[i]->pdev);
3701                 }
3702         }
3703         remove_proc_entry("driver/cciss", NULL);
3704 }
3705
3706 static void fail_all_cmds(unsigned long ctlr)
3707 {
3708         /* If we get here, the board is apparently dead. */
3709         ctlr_info_t *h = hba[ctlr];
3710         CommandList_struct *c;
3711         unsigned long flags;
3712
3713         printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
3714         h->alive = 0;           /* the controller apparently died... */
3715
3716         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
3717
3718         pci_disable_device(h->pdev);    /* Make sure it is really dead. */
3719
3720         /* move everything off the request queue onto the completed queue */
3721         while ((c = h->reqQ) != NULL) {
3722                 removeQ(&(h->reqQ), c);
3723                 h->Qdepth--;
3724                 addQ(&(h->cmpQ), c);
3725         }
3726
3727         /* Now, fail everything on the completed queue with a HW error */
3728         while ((c = h->cmpQ) != NULL) {
3729                 removeQ(&h->cmpQ, c);
3730                 c->err_info->CommandStatus = CMD_HARDWARE_ERR;
3731                 if (c->cmd_type == CMD_RWREQ) {
3732                         complete_command(h, c, 0);
3733                 } else if (c->cmd_type == CMD_IOCTL_PEND)
3734                         complete(c->waiting);
3735 #ifdef CONFIG_CISS_SCSI_TAPE
3736                 else if (c->cmd_type == CMD_SCSI)
3737                         complete_scsi_command(c, 0, 0);
3738 #endif
3739         }
3740         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
3741         return;
3742 }
3743
3744 module_init(cciss_init);
3745 module_exit(cciss_cleanup);