2 * ahci.c - AHCI SATA support
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
8 * Copyright 2004-2005 Red Hat, Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; see the file COPYING. If not, write to
23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
26 * libata documentation is available via 'make {ps|pdf}docs',
27 * as Documentation/DocBook/libata.*
29 * AHCI hardware documentation:
30 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
31 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/pci.h>
38 #include <linux/init.h>
39 #include <linux/blkdev.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/device.h>
44 #include <linux/dmi.h>
45 #include <scsi/scsi_host.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <linux/libata.h>
49 #define DRV_NAME "ahci"
50 #define DRV_VERSION "3.0"
52 static int ahci_skip_host_reset;
53 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
54 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
56 static int ahci_enable_alpm(struct ata_port *ap,
58 static void ahci_disable_alpm(struct ata_port *ap);
59 static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
60 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
62 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
69 AHCI_MAX_SG = 168, /* hardware max is 64K */
70 AHCI_DMA_BOUNDARY = 0xffffffff,
73 AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
75 AHCI_CMD_TBL_CDB = 0x40,
76 AHCI_CMD_TBL_HDR_SZ = 0x80,
77 AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
78 AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
79 AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
81 AHCI_IRQ_ON_SG = (1 << 31),
82 AHCI_CMD_ATAPI = (1 << 5),
83 AHCI_CMD_WRITE = (1 << 6),
84 AHCI_CMD_PREFETCH = (1 << 7),
85 AHCI_CMD_RESET = (1 << 8),
86 AHCI_CMD_CLR_BUSY = (1 << 10),
88 RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
89 RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
90 RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
93 board_ahci_vt8251 = 1,
94 board_ahci_ign_iferr = 2,
101 /* global controller registers */
102 HOST_CAP = 0x00, /* host capabilities */
103 HOST_CTL = 0x04, /* global host control */
104 HOST_IRQ_STAT = 0x08, /* interrupt status */
105 HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
106 HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
107 HOST_EM_LOC = 0x1c, /* Enclosure Management location */
108 HOST_EM_CTL = 0x20, /* Enclosure Management Control */
111 HOST_RESET = (1 << 0), /* reset controller; self-clear */
112 HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
113 HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
116 HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
117 HOST_CAP_SSC = (1 << 14), /* Slumber capable */
118 HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
119 HOST_CAP_CLO = (1 << 24), /* Command List Override support */
120 HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
121 HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
122 HOST_CAP_SNTF = (1 << 29), /* SNotification register */
123 HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
124 HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
126 /* registers for each SATA port */
127 PORT_LST_ADDR = 0x00, /* command list DMA addr */
128 PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
129 PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
130 PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
131 PORT_IRQ_STAT = 0x10, /* interrupt status */
132 PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
133 PORT_CMD = 0x18, /* port command */
134 PORT_TFDATA = 0x20, /* taskfile data */
135 PORT_SIG = 0x24, /* device TF signature */
136 PORT_CMD_ISSUE = 0x38, /* command issue */
137 PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
138 PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
139 PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
140 PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
141 PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
143 /* PORT_IRQ_{STAT,MASK} bits */
144 PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
145 PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
146 PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
147 PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
148 PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
149 PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
150 PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
151 PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
153 PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
154 PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
155 PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
156 PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
157 PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
158 PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
159 PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
160 PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
161 PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
163 PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
169 PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
171 PORT_IRQ_HBUS_DATA_ERR,
172 DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
173 PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
174 PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
177 PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
178 PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
179 PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
180 PORT_CMD_PMP = (1 << 17), /* PMP attached */
181 PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
182 PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
183 PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
184 PORT_CMD_CLO = (1 << 3), /* Command list override */
185 PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
186 PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
187 PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
189 PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
190 PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
191 PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
192 PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
194 /* hpriv->flags bits */
195 AHCI_HFLAG_NO_NCQ = (1 << 0),
196 AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
197 AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
198 AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
199 AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
200 AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
201 AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
202 AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
203 AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
204 AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
208 AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
209 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
210 ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
213 ICH_MAP = 0x90, /* ICH MAP register */
216 EM_CTL_RST = (1 << 9), /* Reset */
217 EM_CTL_TM = (1 << 8), /* Transmit Message */
218 EM_CTL_ALHD = (1 << 26), /* Activity LED */
221 struct ahci_cmd_hdr {
236 struct ahci_em_priv {
237 enum sw_activity blink_policy;
238 struct timer_list timer;
239 unsigned long saved_activity;
240 unsigned long activity;
241 unsigned long led_state;
244 struct ahci_host_priv {
245 unsigned int flags; /* AHCI_HFLAG_* */
246 u32 cap; /* cap to use */
247 u32 port_map; /* port map to use */
248 u32 saved_cap; /* saved initial cap */
249 u32 saved_port_map; /* saved initial port_map */
250 u32 em_loc; /* enclosure management location */
253 struct ahci_port_priv {
254 struct ata_link *active_link;
255 struct ahci_cmd_hdr *cmd_slot;
256 dma_addr_t cmd_slot_dma;
258 dma_addr_t cmd_tbl_dma;
260 dma_addr_t rx_fis_dma;
261 /* for NCQ spurious interrupt analysis */
262 unsigned int ncq_saw_d2h:1;
263 unsigned int ncq_saw_dmas:1;
264 unsigned int ncq_saw_sdb:1;
265 u32 intr_mask; /* interrupts to enable */
266 struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info
270 static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
271 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
272 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
273 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
274 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
275 static int ahci_port_start(struct ata_port *ap);
276 static void ahci_port_stop(struct ata_port *ap);
277 static void ahci_qc_prep(struct ata_queued_cmd *qc);
278 static void ahci_freeze(struct ata_port *ap);
279 static void ahci_thaw(struct ata_port *ap);
280 static void ahci_pmp_attach(struct ata_port *ap);
281 static void ahci_pmp_detach(struct ata_port *ap);
282 static int ahci_softreset(struct ata_link *link, unsigned int *class,
283 unsigned long deadline);
284 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
285 unsigned long deadline);
286 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
287 unsigned long deadline);
288 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
289 unsigned long deadline);
290 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
291 unsigned long deadline);
292 static void ahci_postreset(struct ata_link *link, unsigned int *class);
293 static void ahci_error_handler(struct ata_port *ap);
294 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
295 static int ahci_port_resume(struct ata_port *ap);
296 static void ahci_dev_config(struct ata_device *dev);
297 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
298 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
301 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
302 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
303 static int ahci_pci_device_resume(struct pci_dev *pdev);
305 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
306 static ssize_t ahci_activity_store(struct ata_device *dev,
307 enum sw_activity val);
308 static void ahci_init_sw_activity(struct ata_link *link);
310 static struct device_attribute *ahci_shost_attrs[] = {
311 &dev_attr_link_power_management_policy,
312 &dev_attr_em_message_type,
313 &dev_attr_em_message,
317 static struct device_attribute *ahci_sdev_attrs[] = {
318 &dev_attr_sw_activity,
322 static struct scsi_host_template ahci_sht = {
323 ATA_NCQ_SHT(DRV_NAME),
324 .can_queue = AHCI_MAX_CMDS - 1,
325 .sg_tablesize = AHCI_MAX_SG,
326 .dma_boundary = AHCI_DMA_BOUNDARY,
327 .shost_attrs = ahci_shost_attrs,
328 .sdev_attrs = ahci_sdev_attrs,
331 static struct ata_port_operations ahci_ops = {
332 .inherits = &sata_pmp_port_ops,
334 .qc_defer = sata_pmp_qc_defer_cmd_switch,
335 .qc_prep = ahci_qc_prep,
336 .qc_issue = ahci_qc_issue,
337 .qc_fill_rtf = ahci_qc_fill_rtf,
339 .freeze = ahci_freeze,
341 .softreset = ahci_softreset,
342 .hardreset = ahci_hardreset,
343 .postreset = ahci_postreset,
344 .pmp_softreset = ahci_softreset,
345 .error_handler = ahci_error_handler,
346 .post_internal_cmd = ahci_post_internal_cmd,
347 .dev_config = ahci_dev_config,
349 .scr_read = ahci_scr_read,
350 .scr_write = ahci_scr_write,
351 .pmp_attach = ahci_pmp_attach,
352 .pmp_detach = ahci_pmp_detach,
354 .enable_pm = ahci_enable_alpm,
355 .disable_pm = ahci_disable_alpm,
356 .em_show = ahci_led_show,
357 .em_store = ahci_led_store,
358 .sw_activity_show = ahci_activity_show,
359 .sw_activity_store = ahci_activity_store,
361 .port_suspend = ahci_port_suspend,
362 .port_resume = ahci_port_resume,
364 .port_start = ahci_port_start,
365 .port_stop = ahci_port_stop,
368 static struct ata_port_operations ahci_vt8251_ops = {
369 .inherits = &ahci_ops,
370 .hardreset = ahci_vt8251_hardreset,
373 static struct ata_port_operations ahci_p5wdh_ops = {
374 .inherits = &ahci_ops,
375 .hardreset = ahci_p5wdh_hardreset,
378 static struct ata_port_operations ahci_sb600_ops = {
379 .inherits = &ahci_ops,
380 .softreset = ahci_sb600_softreset,
381 .pmp_softreset = ahci_sb600_softreset,
384 #define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
386 static const struct ata_port_info ahci_port_info[] = {
389 .flags = AHCI_FLAG_COMMON,
390 .pio_mask = 0x1f, /* pio0-4 */
391 .udma_mask = ATA_UDMA6,
392 .port_ops = &ahci_ops,
394 /* board_ahci_vt8251 */
396 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
397 .flags = AHCI_FLAG_COMMON,
398 .pio_mask = 0x1f, /* pio0-4 */
399 .udma_mask = ATA_UDMA6,
400 .port_ops = &ahci_vt8251_ops,
402 /* board_ahci_ign_iferr */
404 AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
405 .flags = AHCI_FLAG_COMMON,
406 .pio_mask = 0x1f, /* pio0-4 */
407 .udma_mask = ATA_UDMA6,
408 .port_ops = &ahci_ops,
410 /* board_ahci_sb600 */
412 AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
413 AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
415 .flags = AHCI_FLAG_COMMON,
416 .pio_mask = 0x1f, /* pio0-4 */
417 .udma_mask = ATA_UDMA6,
418 .port_ops = &ahci_sb600_ops,
422 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
424 .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
425 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
426 .pio_mask = 0x1f, /* pio0-4 */
427 .udma_mask = ATA_UDMA6,
428 .port_ops = &ahci_ops,
430 /* board_ahci_sb700 */
432 AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
433 .flags = AHCI_FLAG_COMMON,
434 .pio_mask = 0x1f, /* pio0-4 */
435 .udma_mask = ATA_UDMA6,
436 .port_ops = &ahci_sb600_ops,
438 /* board_ahci_mcp65 */
440 AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
441 .flags = AHCI_FLAG_COMMON,
442 .pio_mask = 0x1f, /* pio0-4 */
443 .udma_mask = ATA_UDMA6,
444 .port_ops = &ahci_ops,
446 /* board_ahci_nopmp */
448 AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
449 .flags = AHCI_FLAG_COMMON,
450 .pio_mask = 0x1f, /* pio0-4 */
451 .udma_mask = ATA_UDMA6,
452 .port_ops = &ahci_ops,
456 static const struct pci_device_id ahci_pci_tbl[] = {
458 { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
459 { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
460 { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
461 { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
462 { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
463 { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
464 { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
465 { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
466 { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
467 { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
468 { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
469 { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
470 { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
471 { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
472 { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
473 { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
474 { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
475 { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
476 { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
477 { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
478 { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
479 { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
480 { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
481 { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
482 { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
483 { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
484 { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
485 { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
486 { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
487 { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
488 { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
490 /* JMicron 360/1/3/5/6, match class to avoid IDE function */
491 { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
492 PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
495 { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
496 { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
497 { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
498 { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
499 { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
500 { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
501 { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
504 { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
505 { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
508 { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
509 { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
510 { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
511 { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
512 { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
513 { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
514 { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
515 { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
516 { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
517 { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
518 { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
519 { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
520 { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
521 { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
522 { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
523 { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
524 { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
525 { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
526 { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
527 { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
528 { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
529 { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
530 { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
531 { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
532 { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
533 { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
534 { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
535 { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
536 { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
537 { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
538 { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
539 { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
540 { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
541 { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
542 { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
543 { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
544 { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
545 { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
546 { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
547 { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
548 { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
549 { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
550 { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
551 { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
552 { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
553 { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
554 { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
555 { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
556 { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
557 { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
558 { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
559 { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
560 { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
561 { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
562 { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
563 { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
564 { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
565 { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
566 { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
567 { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
568 { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
569 { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
570 { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
571 { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
572 { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
573 { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
574 { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
575 { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
578 { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
579 { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
580 { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
583 { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
584 { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
586 /* Generic, PCI class code for AHCI */
587 { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
588 PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
590 { } /* terminate list */
594 static struct pci_driver ahci_pci_driver = {
596 .id_table = ahci_pci_tbl,
597 .probe = ahci_init_one,
598 .remove = ata_pci_remove_one,
600 .suspend = ahci_pci_device_suspend,
601 .resume = ahci_pci_device_resume,
605 static int ahci_em_messages = 1;
606 module_param(ahci_em_messages, int, 0444);
607 /* add other LED protocol types when they become supported */
608 MODULE_PARM_DESC(ahci_em_messages,
609 "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
611 static inline int ahci_nr_ports(u32 cap)
613 return (cap & 0x1f) + 1;
616 static inline void __iomem *__ahci_port_base(struct ata_host *host,
617 unsigned int port_no)
619 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
621 return mmio + 0x100 + (port_no * 0x80);
624 static inline void __iomem *ahci_port_base(struct ata_port *ap)
626 return __ahci_port_base(ap->host, ap->port_no);
629 static void ahci_enable_ahci(void __iomem *mmio)
634 /* turn on AHCI_EN */
635 tmp = readl(mmio + HOST_CTL);
636 if (tmp & HOST_AHCI_EN)
639 /* Some controllers need AHCI_EN to be written multiple times.
640 * Try a few times before giving up.
642 for (i = 0; i < 5; i++) {
644 writel(tmp, mmio + HOST_CTL);
645 tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
646 if (tmp & HOST_AHCI_EN)
655 * ahci_save_initial_config - Save and fixup initial config values
656 * @pdev: target PCI device
657 * @hpriv: host private area to store config values
659 * Some registers containing configuration info might be setup by
660 * BIOS and might be cleared on reset. This function saves the
661 * initial values of those registers into @hpriv such that they
662 * can be restored after controller reset.
664 * If inconsistent, config values are fixed up by this function.
669 static void ahci_save_initial_config(struct pci_dev *pdev,
670 struct ahci_host_priv *hpriv)
672 void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
677 /* make sure AHCI mode is enabled before accessing CAP */
678 ahci_enable_ahci(mmio);
680 /* Values prefixed with saved_ are written back to host after
681 * reset. Values without are used for driver operation.
683 hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
684 hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
686 /* some chips have errata preventing 64bit use */
687 if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
688 dev_printk(KERN_INFO, &pdev->dev,
689 "controller can't do 64bit DMA, forcing 32bit\n");
693 if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
694 dev_printk(KERN_INFO, &pdev->dev,
695 "controller can't do NCQ, turning off CAP_NCQ\n");
696 cap &= ~HOST_CAP_NCQ;
699 if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
700 dev_printk(KERN_INFO, &pdev->dev,
701 "controller can do NCQ, turning on CAP_NCQ\n");
705 if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
706 dev_printk(KERN_INFO, &pdev->dev,
707 "controller can't do PMP, turning off CAP_PMP\n");
708 cap &= ~HOST_CAP_PMP;
711 if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
713 dev_printk(KERN_INFO, &pdev->dev,
714 "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
720 * Temporary Marvell 6145 hack: PATA port presence
721 * is asserted through the standard AHCI port
722 * presence register, as bit 4 (counting from 0)
724 if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
725 if (pdev->device == 0x6121)
729 dev_printk(KERN_ERR, &pdev->dev,
730 "MV_AHCI HACK: port_map %x -> %x\n",
737 /* cross check port_map and cap.n_ports */
741 for (i = 0; i < AHCI_MAX_PORTS; i++)
742 if (port_map & (1 << i))
745 /* If PI has more ports than n_ports, whine, clear
746 * port_map and let it be generated from n_ports.
748 if (map_ports > ahci_nr_ports(cap)) {
749 dev_printk(KERN_WARNING, &pdev->dev,
750 "implemented port map (0x%x) contains more "
751 "ports than nr_ports (%u), using nr_ports\n",
752 port_map, ahci_nr_ports(cap));
757 /* fabricate port_map from cap.nr_ports */
759 port_map = (1 << ahci_nr_ports(cap)) - 1;
760 dev_printk(KERN_WARNING, &pdev->dev,
761 "forcing PORTS_IMPL to 0x%x\n", port_map);
763 /* write the fixed up value to the PI register */
764 hpriv->saved_port_map = port_map;
767 /* record values to use during operation */
769 hpriv->port_map = port_map;
773 * ahci_restore_initial_config - Restore initial config
774 * @host: target ATA host
776 * Restore initial config stored by ahci_save_initial_config().
781 static void ahci_restore_initial_config(struct ata_host *host)
783 struct ahci_host_priv *hpriv = host->private_data;
784 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
786 writel(hpriv->saved_cap, mmio + HOST_CAP);
787 writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
788 (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
791 static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
793 static const int offset[] = {
794 [SCR_STATUS] = PORT_SCR_STAT,
795 [SCR_CONTROL] = PORT_SCR_CTL,
796 [SCR_ERROR] = PORT_SCR_ERR,
797 [SCR_ACTIVE] = PORT_SCR_ACT,
798 [SCR_NOTIFICATION] = PORT_SCR_NTF,
800 struct ahci_host_priv *hpriv = ap->host->private_data;
802 if (sc_reg < ARRAY_SIZE(offset) &&
803 (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
804 return offset[sc_reg];
808 static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
810 void __iomem *port_mmio = ahci_port_base(ap);
811 int offset = ahci_scr_offset(ap, sc_reg);
814 *val = readl(port_mmio + offset);
820 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
822 void __iomem *port_mmio = ahci_port_base(ap);
823 int offset = ahci_scr_offset(ap, sc_reg);
826 writel(val, port_mmio + offset);
832 static void ahci_start_engine(struct ata_port *ap)
834 void __iomem *port_mmio = ahci_port_base(ap);
838 tmp = readl(port_mmio + PORT_CMD);
839 tmp |= PORT_CMD_START;
840 writel(tmp, port_mmio + PORT_CMD);
841 readl(port_mmio + PORT_CMD); /* flush */
844 static int ahci_stop_engine(struct ata_port *ap)
846 void __iomem *port_mmio = ahci_port_base(ap);
849 tmp = readl(port_mmio + PORT_CMD);
851 /* check if the HBA is idle */
852 if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
855 /* setting HBA to idle */
856 tmp &= ~PORT_CMD_START;
857 writel(tmp, port_mmio + PORT_CMD);
859 /* wait for engine to stop. This could be as long as 500 msec */
860 tmp = ata_wait_register(port_mmio + PORT_CMD,
861 PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
862 if (tmp & PORT_CMD_LIST_ON)
868 static void ahci_start_fis_rx(struct ata_port *ap)
870 void __iomem *port_mmio = ahci_port_base(ap);
871 struct ahci_host_priv *hpriv = ap->host->private_data;
872 struct ahci_port_priv *pp = ap->private_data;
875 /* set FIS registers */
876 if (hpriv->cap & HOST_CAP_64)
877 writel((pp->cmd_slot_dma >> 16) >> 16,
878 port_mmio + PORT_LST_ADDR_HI);
879 writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
881 if (hpriv->cap & HOST_CAP_64)
882 writel((pp->rx_fis_dma >> 16) >> 16,
883 port_mmio + PORT_FIS_ADDR_HI);
884 writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
886 /* enable FIS reception */
887 tmp = readl(port_mmio + PORT_CMD);
888 tmp |= PORT_CMD_FIS_RX;
889 writel(tmp, port_mmio + PORT_CMD);
892 readl(port_mmio + PORT_CMD);
895 static int ahci_stop_fis_rx(struct ata_port *ap)
897 void __iomem *port_mmio = ahci_port_base(ap);
900 /* disable FIS reception */
901 tmp = readl(port_mmio + PORT_CMD);
902 tmp &= ~PORT_CMD_FIS_RX;
903 writel(tmp, port_mmio + PORT_CMD);
905 /* wait for completion, spec says 500ms, give it 1000 */
906 tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
907 PORT_CMD_FIS_ON, 10, 1000);
908 if (tmp & PORT_CMD_FIS_ON)
914 static void ahci_power_up(struct ata_port *ap)
916 struct ahci_host_priv *hpriv = ap->host->private_data;
917 void __iomem *port_mmio = ahci_port_base(ap);
920 cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
923 if (hpriv->cap & HOST_CAP_SSS) {
924 cmd |= PORT_CMD_SPIN_UP;
925 writel(cmd, port_mmio + PORT_CMD);
929 writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
932 static void ahci_disable_alpm(struct ata_port *ap)
934 struct ahci_host_priv *hpriv = ap->host->private_data;
935 void __iomem *port_mmio = ahci_port_base(ap);
937 struct ahci_port_priv *pp = ap->private_data;
939 /* IPM bits should be disabled by libata-core */
940 /* get the existing command bits */
941 cmd = readl(port_mmio + PORT_CMD);
943 /* disable ALPM and ASP */
944 cmd &= ~PORT_CMD_ASP;
945 cmd &= ~PORT_CMD_ALPE;
947 /* force the interface back to active */
948 cmd |= PORT_CMD_ICC_ACTIVE;
950 /* write out new cmd value */
951 writel(cmd, port_mmio + PORT_CMD);
952 cmd = readl(port_mmio + PORT_CMD);
954 /* wait 10ms to be sure we've come out of any low power state */
957 /* clear out any PhyRdy stuff from interrupt status */
958 writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
960 /* go ahead and clean out PhyRdy Change from Serror too */
961 ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
964 * Clear flag to indicate that we should ignore all PhyRdy
967 hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
970 * Enable interrupts on Phy Ready.
972 pp->intr_mask |= PORT_IRQ_PHYRDY;
973 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
976 * don't change the link pm policy - we can be called
977 * just to turn of link pm temporarily
981 static int ahci_enable_alpm(struct ata_port *ap,
984 struct ahci_host_priv *hpriv = ap->host->private_data;
985 void __iomem *port_mmio = ahci_port_base(ap);
987 struct ahci_port_priv *pp = ap->private_data;
990 /* Make sure the host is capable of link power management */
991 if (!(hpriv->cap & HOST_CAP_ALPM))
995 case MAX_PERFORMANCE:
998 * if we came here with NOT_AVAILABLE,
999 * it just means this is the first time we
1000 * have tried to enable - default to max performance,
1001 * and let the user go to lower power modes on request.
1003 ahci_disable_alpm(ap);
1006 /* configure HBA to enter SLUMBER */
1010 /* configure HBA to enter PARTIAL */
1018 * Disable interrupts on Phy Ready. This keeps us from
1019 * getting woken up due to spurious phy ready interrupts
1020 * TBD - Hot plug should be done via polling now, is
1021 * that even supported?
1023 pp->intr_mask &= ~PORT_IRQ_PHYRDY;
1024 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1027 * Set a flag to indicate that we should ignore all PhyRdy
1028 * state changes since these can happen now whenever we
1031 hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
1033 /* get the existing command bits */
1034 cmd = readl(port_mmio + PORT_CMD);
1037 * Set ASP based on Policy
1042 * Setting this bit will instruct the HBA to aggressively
1043 * enter a lower power link state when it's appropriate and
1044 * based on the value set above for ASP
1046 cmd |= PORT_CMD_ALPE;
1048 /* write out new cmd value */
1049 writel(cmd, port_mmio + PORT_CMD);
1050 cmd = readl(port_mmio + PORT_CMD);
1052 /* IPM bits should be set by libata-core */
1057 static void ahci_power_down(struct ata_port *ap)
1059 struct ahci_host_priv *hpriv = ap->host->private_data;
1060 void __iomem *port_mmio = ahci_port_base(ap);
1063 if (!(hpriv->cap & HOST_CAP_SSS))
1066 /* put device into listen mode, first set PxSCTL.DET to 0 */
1067 scontrol = readl(port_mmio + PORT_SCR_CTL);
1069 writel(scontrol, port_mmio + PORT_SCR_CTL);
1071 /* then set PxCMD.SUD to 0 */
1072 cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
1073 cmd &= ~PORT_CMD_SPIN_UP;
1074 writel(cmd, port_mmio + PORT_CMD);
1078 static void ahci_start_port(struct ata_port *ap)
1080 struct ahci_port_priv *pp = ap->private_data;
1081 struct ata_link *link;
1082 struct ahci_em_priv *emp;
1084 /* enable FIS reception */
1085 ahci_start_fis_rx(ap);
1088 ahci_start_engine(ap);
1091 if (ap->flags & ATA_FLAG_EM) {
1092 ata_port_for_each_link(link, ap) {
1093 emp = &pp->em_priv[link->pmp];
1094 ahci_transmit_led_message(ap, emp->led_state, 4);
1098 if (ap->flags & ATA_FLAG_SW_ACTIVITY)
1099 ata_port_for_each_link(link, ap)
1100 ahci_init_sw_activity(link);
1104 static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
1109 rc = ahci_stop_engine(ap);
1111 *emsg = "failed to stop engine";
1115 /* disable FIS reception */
1116 rc = ahci_stop_fis_rx(ap);
1118 *emsg = "failed stop FIS RX";
1125 static int ahci_reset_controller(struct ata_host *host)
1127 struct pci_dev *pdev = to_pci_dev(host->dev);
1128 struct ahci_host_priv *hpriv = host->private_data;
1129 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1132 /* we must be in AHCI mode, before using anything
1133 * AHCI-specific, such as HOST_RESET.
1135 ahci_enable_ahci(mmio);
1137 /* global controller reset */
1138 if (!ahci_skip_host_reset) {
1139 tmp = readl(mmio + HOST_CTL);
1140 if ((tmp & HOST_RESET) == 0) {
1141 writel(tmp | HOST_RESET, mmio + HOST_CTL);
1142 readl(mmio + HOST_CTL); /* flush */
1146 * to perform host reset, OS should set HOST_RESET
1147 * and poll until this bit is read to be "0".
1148 * reset must complete within 1 second, or
1149 * the hardware should be considered fried.
1151 tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
1152 HOST_RESET, 10, 1000);
1154 if (tmp & HOST_RESET) {
1155 dev_printk(KERN_ERR, host->dev,
1156 "controller reset failed (0x%x)\n", tmp);
1160 /* turn on AHCI mode */
1161 ahci_enable_ahci(mmio);
1163 /* Some registers might be cleared on reset. Restore
1166 ahci_restore_initial_config(host);
1168 dev_printk(KERN_INFO, host->dev,
1169 "skipping global host reset\n");
1171 if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
1175 pci_read_config_word(pdev, 0x92, &tmp16);
1176 if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
1177 tmp16 |= hpriv->port_map;
1178 pci_write_config_word(pdev, 0x92, tmp16);
1185 static void ahci_sw_activity(struct ata_link *link)
1187 struct ata_port *ap = link->ap;
1188 struct ahci_port_priv *pp = ap->private_data;
1189 struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1191 if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
1195 if (!timer_pending(&emp->timer))
1196 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
1199 static void ahci_sw_activity_blink(unsigned long arg)
1201 struct ata_link *link = (struct ata_link *)arg;
1202 struct ata_port *ap = link->ap;
1203 struct ahci_port_priv *pp = ap->private_data;
1204 struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1205 unsigned long led_message = emp->led_state;
1206 u32 activity_led_state;
1208 led_message &= 0xffff0000;
1209 led_message |= ap->port_no | (link->pmp << 8);
1211 /* check to see if we've had activity. If so,
1212 * toggle state of LED and reset timer. If not,
1213 * turn LED to desired idle state.
1215 if (emp->saved_activity != emp->activity) {
1216 emp->saved_activity = emp->activity;
1217 /* get the current LED state */
1218 activity_led_state = led_message & 0x00010000;
1220 if (activity_led_state)
1221 activity_led_state = 0;
1223 activity_led_state = 1;
1225 /* clear old state */
1226 led_message &= 0xfff8ffff;
1229 led_message |= (activity_led_state << 16);
1230 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
1232 /* switch to idle */
1233 led_message &= 0xfff8ffff;
1234 if (emp->blink_policy == BLINK_OFF)
1235 led_message |= (1 << 16);
1237 ahci_transmit_led_message(ap, led_message, 4);
1240 static void ahci_init_sw_activity(struct ata_link *link)
1242 struct ata_port *ap = link->ap;
1243 struct ahci_port_priv *pp = ap->private_data;
1244 struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1246 /* init activity stats, setup timer */
1247 emp->saved_activity = emp->activity = 0;
1248 setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
1250 /* check our blink policy and set flag for link if it's enabled */
1251 if (emp->blink_policy)
1252 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1255 static int ahci_reset_em(struct ata_host *host)
1257 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1260 em_ctl = readl(mmio + HOST_EM_CTL);
1261 if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
1264 writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
1268 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
1271 struct ahci_host_priv *hpriv = ap->host->private_data;
1272 struct ahci_port_priv *pp = ap->private_data;
1273 void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
1275 u32 message[] = {0, 0};
1276 unsigned long flags;
1278 struct ahci_em_priv *emp;
1280 /* get the slot number from the message */
1281 pmp = (state & 0x0000ff00) >> 8;
1282 if (pmp < MAX_SLOTS)
1283 emp = &pp->em_priv[pmp];
1287 spin_lock_irqsave(ap->lock, flags);
1290 * if we are still busy transmitting a previous message,
1293 em_ctl = readl(mmio + HOST_EM_CTL);
1294 if (em_ctl & EM_CTL_TM) {
1295 spin_unlock_irqrestore(ap->lock, flags);
1300 * create message header - this is all zero except for
1301 * the message size, which is 4 bytes.
1303 message[0] |= (4 << 8);
1305 /* ignore 0:4 of byte zero, fill in port info yourself */
1306 message[1] = ((state & 0xfffffff0) | ap->port_no);
1308 /* write message to EM_LOC */
1309 writel(message[0], mmio + hpriv->em_loc);
1310 writel(message[1], mmio + hpriv->em_loc+4);
1312 /* save off new led state for port/slot */
1313 emp->led_state = message[1];
1316 * tell hardware to transmit the message
1318 writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
1320 spin_unlock_irqrestore(ap->lock, flags);
1324 static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
1326 struct ahci_port_priv *pp = ap->private_data;
1327 struct ata_link *link;
1328 struct ahci_em_priv *emp;
1331 ata_port_for_each_link(link, ap) {
1332 emp = &pp->em_priv[link->pmp];
1333 rc += sprintf(buf, "%lx\n", emp->led_state);
1338 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
1343 struct ahci_port_priv *pp = ap->private_data;
1344 struct ahci_em_priv *emp;
1346 state = simple_strtoul(buf, NULL, 0);
1348 /* get the slot number from the message */
1349 pmp = (state & 0x0000ff00) >> 8;
1350 if (pmp < MAX_SLOTS)
1351 emp = &pp->em_priv[pmp];
1355 /* mask off the activity bits if we are in sw_activity
1356 * mode, user should turn off sw_activity before setting
1357 * activity led through em_message
1359 if (emp->blink_policy)
1360 state &= 0xfff8ffff;
1362 return ahci_transmit_led_message(ap, state, size);
1365 static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
1367 struct ata_link *link = dev->link;
1368 struct ata_port *ap = link->ap;
1369 struct ahci_port_priv *pp = ap->private_data;
1370 struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1371 u32 port_led_state = emp->led_state;
1373 /* save the desired Activity LED behavior */
1376 link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
1378 /* set the LED to OFF */
1379 port_led_state &= 0xfff80000;
1380 port_led_state |= (ap->port_no | (link->pmp << 8));
1381 ahci_transmit_led_message(ap, port_led_state, 4);
1383 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1384 if (val == BLINK_OFF) {
1385 /* set LED to ON for idle */
1386 port_led_state &= 0xfff80000;
1387 port_led_state |= (ap->port_no | (link->pmp << 8));
1388 port_led_state |= 0x00010000; /* check this */
1389 ahci_transmit_led_message(ap, port_led_state, 4);
1392 emp->blink_policy = val;
1396 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
1398 struct ata_link *link = dev->link;
1399 struct ata_port *ap = link->ap;
1400 struct ahci_port_priv *pp = ap->private_data;
1401 struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1403 /* display the saved value of activity behavior for this
1406 return sprintf(buf, "%d\n", emp->blink_policy);
1409 static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
1410 int port_no, void __iomem *mmio,
1411 void __iomem *port_mmio)
1413 const char *emsg = NULL;
1417 /* make sure port is not active */
1418 rc = ahci_deinit_port(ap, &emsg);
1420 dev_printk(KERN_WARNING, &pdev->dev,
1421 "%s (%d)\n", emsg, rc);
1424 tmp = readl(port_mmio + PORT_SCR_ERR);
1425 VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
1426 writel(tmp, port_mmio + PORT_SCR_ERR);
1428 /* clear port IRQ */
1429 tmp = readl(port_mmio + PORT_IRQ_STAT);
1430 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1432 writel(tmp, port_mmio + PORT_IRQ_STAT);
1434 writel(1 << port_no, mmio + HOST_IRQ_STAT);
1437 static void ahci_init_controller(struct ata_host *host)
1439 struct ahci_host_priv *hpriv = host->private_data;
1440 struct pci_dev *pdev = to_pci_dev(host->dev);
1441 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1443 void __iomem *port_mmio;
1447 if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
1448 if (pdev->device == 0x6121)
1452 port_mmio = __ahci_port_base(host, mv);
1454 writel(0, port_mmio + PORT_IRQ_MASK);
1456 /* clear port IRQ */
1457 tmp = readl(port_mmio + PORT_IRQ_STAT);
1458 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1460 writel(tmp, port_mmio + PORT_IRQ_STAT);
1463 for (i = 0; i < host->n_ports; i++) {
1464 struct ata_port *ap = host->ports[i];
1466 port_mmio = ahci_port_base(ap);
1467 if (ata_port_is_dummy(ap))
1470 ahci_port_init(pdev, ap, i, mmio, port_mmio);
1473 tmp = readl(mmio + HOST_CTL);
1474 VPRINTK("HOST_CTL 0x%x\n", tmp);
1475 writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
1476 tmp = readl(mmio + HOST_CTL);
1477 VPRINTK("HOST_CTL 0x%x\n", tmp);
1480 static void ahci_dev_config(struct ata_device *dev)
1482 struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
1484 if (hpriv->flags & AHCI_HFLAG_SECT255) {
1485 dev->max_sectors = 255;
1486 ata_dev_printk(dev, KERN_INFO,
1487 "SB600 AHCI: limiting to 255 sectors per cmd\n");
1491 static unsigned int ahci_dev_classify(struct ata_port *ap)
1493 void __iomem *port_mmio = ahci_port_base(ap);
1494 struct ata_taskfile tf;
1497 tmp = readl(port_mmio + PORT_SIG);
1498 tf.lbah = (tmp >> 24) & 0xff;
1499 tf.lbam = (tmp >> 16) & 0xff;
1500 tf.lbal = (tmp >> 8) & 0xff;
1501 tf.nsect = (tmp) & 0xff;
1503 return ata_dev_classify(&tf);
1506 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
1509 dma_addr_t cmd_tbl_dma;
1511 cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
1513 pp->cmd_slot[tag].opts = cpu_to_le32(opts);
1514 pp->cmd_slot[tag].status = 0;
1515 pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
1516 pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
1519 static int ahci_kick_engine(struct ata_port *ap, int force_restart)
1521 void __iomem *port_mmio = ahci_port_base(ap);
1522 struct ahci_host_priv *hpriv = ap->host->private_data;
1523 u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1527 /* do we need to kick the port? */
1528 busy = status & (ATA_BUSY | ATA_DRQ);
1529 if (!busy && !force_restart)
1533 rc = ahci_stop_engine(ap);
1537 /* need to do CLO? */
1543 if (!(hpriv->cap & HOST_CAP_CLO)) {
1549 tmp = readl(port_mmio + PORT_CMD);
1550 tmp |= PORT_CMD_CLO;
1551 writel(tmp, port_mmio + PORT_CMD);
1554 tmp = ata_wait_register(port_mmio + PORT_CMD,
1555 PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
1556 if (tmp & PORT_CMD_CLO)
1559 /* restart engine */
1561 ahci_start_engine(ap);
1565 static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
1566 struct ata_taskfile *tf, int is_cmd, u16 flags,
1567 unsigned long timeout_msec)
1569 const u32 cmd_fis_len = 5; /* five dwords */
1570 struct ahci_port_priv *pp = ap->private_data;
1571 void __iomem *port_mmio = ahci_port_base(ap);
1572 u8 *fis = pp->cmd_tbl;
1575 /* prep the command */
1576 ata_tf_to_fis(tf, pmp, is_cmd, fis);
1577 ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
1580 writel(1, port_mmio + PORT_CMD_ISSUE);
1583 tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1586 ahci_kick_engine(ap, 1);
1590 readl(port_mmio + PORT_CMD_ISSUE); /* flush */
1595 static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
1596 int pmp, unsigned long deadline,
1597 int (*check_ready)(struct ata_link *link))
1599 struct ata_port *ap = link->ap;
1600 const char *reason = NULL;
1601 unsigned long now, msecs;
1602 struct ata_taskfile tf;
1607 /* prepare for SRST (AHCI-1.1 10.4.1) */
1608 rc = ahci_kick_engine(ap, 1);
1609 if (rc && rc != -EOPNOTSUPP)
1610 ata_link_printk(link, KERN_WARNING,
1611 "failed to reset engine (errno=%d)\n", rc);
1613 ata_tf_init(link->device, &tf);
1615 /* issue the first D2H Register FIS */
1618 if (time_after(now, deadline))
1619 msecs = jiffies_to_msecs(deadline - now);
1622 if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
1623 AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
1625 reason = "1st FIS failed";
1629 /* spec says at least 5us, but be generous and sleep for 1ms */
1632 /* issue the second D2H Register FIS */
1633 tf.ctl &= ~ATA_SRST;
1634 ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
1636 /* wait for link to become ready */
1637 rc = ata_wait_after_reset(link, deadline, check_ready);
1638 /* link occupied, -ENODEV too is an error */
1640 reason = "device not ready";
1643 *class = ahci_dev_classify(ap);
1645 DPRINTK("EXIT, class=%u\n", *class);
1649 ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
1653 static int ahci_check_ready(struct ata_link *link)
1655 void __iomem *port_mmio = ahci_port_base(link->ap);
1656 u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1658 return ata_check_ready(status);
1661 static int ahci_softreset(struct ata_link *link, unsigned int *class,
1662 unsigned long deadline)
1664 int pmp = sata_srst_pmp(link);
1668 return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
1671 static int ahci_sb600_check_ready(struct ata_link *link)
1673 void __iomem *port_mmio = ahci_port_base(link->ap);
1674 u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1675 u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
1678 * There is no need to check TFDATA if BAD PMP is found due to HW bug,
1679 * which can save timeout delay.
1681 if (irq_status & PORT_IRQ_BAD_PMP)
1684 return ata_check_ready(status);
1687 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
1688 unsigned long deadline)
1690 struct ata_port *ap = link->ap;
1691 void __iomem *port_mmio = ahci_port_base(ap);
1692 int pmp = sata_srst_pmp(link);
1698 rc = ahci_do_softreset(link, class, pmp, deadline,
1699 ahci_sb600_check_ready);
1702 * Soft reset fails on some ATI chips with IPMS set when PMP
1703 * is enabled but SATA HDD/ODD is connected to SATA port,
1704 * do soft reset again to port 0.
1707 irq_sts = readl(port_mmio + PORT_IRQ_STAT);
1708 if (irq_sts & PORT_IRQ_BAD_PMP) {
1709 ata_link_printk(link, KERN_WARNING,
1710 "failed due to HW bug, retry pmp=0\n");
1711 rc = ahci_do_softreset(link, class, 0, deadline,
1719 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
1720 unsigned long deadline)
1722 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
1723 struct ata_port *ap = link->ap;
1724 struct ahci_port_priv *pp = ap->private_data;
1725 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1726 struct ata_taskfile tf;
1732 ahci_stop_engine(ap);
1734 /* clear D2H reception area to properly wait for D2H FIS */
1735 ata_tf_init(link->device, &tf);
1737 ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1739 rc = sata_link_hardreset(link, timing, deadline, &online,
1742 ahci_start_engine(ap);
1745 *class = ahci_dev_classify(ap);
1747 DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1751 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
1752 unsigned long deadline)
1754 struct ata_port *ap = link->ap;
1760 ahci_stop_engine(ap);
1762 rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1763 deadline, &online, NULL);
1765 ahci_start_engine(ap);
1767 DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1769 /* vt8251 doesn't clear BSY on signature FIS reception,
1770 * request follow-up softreset.
1772 return online ? -EAGAIN : rc;
1775 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
1776 unsigned long deadline)
1778 struct ata_port *ap = link->ap;
1779 struct ahci_port_priv *pp = ap->private_data;
1780 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1781 struct ata_taskfile tf;
1785 ahci_stop_engine(ap);
1787 /* clear D2H reception area to properly wait for D2H FIS */
1788 ata_tf_init(link->device, &tf);
1790 ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1792 rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1793 deadline, &online, NULL);
1795 ahci_start_engine(ap);
1797 /* The pseudo configuration device on SIMG4726 attached to
1798 * ASUS P5W-DH Deluxe doesn't send signature FIS after
1799 * hardreset if no device is attached to the first downstream
1800 * port && the pseudo device locks up on SRST w/ PMP==0. To
1801 * work around this, wait for !BSY only briefly. If BSY isn't
1802 * cleared, perform CLO and proceed to IDENTIFY (achieved by
1803 * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
1805 * Wait for two seconds. Devices attached to downstream port
1806 * which can't process the following IDENTIFY after this will
1807 * have to be reset again. For most cases, this should
1808 * suffice while making probing snappish enough.
1811 rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
1814 ahci_kick_engine(ap, 0);
1819 static void ahci_postreset(struct ata_link *link, unsigned int *class)
1821 struct ata_port *ap = link->ap;
1822 void __iomem *port_mmio = ahci_port_base(ap);
1825 ata_std_postreset(link, class);
1827 /* Make sure port's ATAPI bit is set appropriately */
1828 new_tmp = tmp = readl(port_mmio + PORT_CMD);
1829 if (*class == ATA_DEV_ATAPI)
1830 new_tmp |= PORT_CMD_ATAPI;
1832 new_tmp &= ~PORT_CMD_ATAPI;
1833 if (new_tmp != tmp) {
1834 writel(new_tmp, port_mmio + PORT_CMD);
1835 readl(port_mmio + PORT_CMD); /* flush */
1839 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
1841 struct scatterlist *sg;
1842 struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
1848 * Next, the S/G list.
1850 for_each_sg(qc->sg, sg, qc->n_elem, si) {
1851 dma_addr_t addr = sg_dma_address(sg);
1852 u32 sg_len = sg_dma_len(sg);
1854 ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
1855 ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
1856 ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
1862 static void ahci_qc_prep(struct ata_queued_cmd *qc)
1864 struct ata_port *ap = qc->ap;
1865 struct ahci_port_priv *pp = ap->private_data;
1866 int is_atapi = ata_is_atapi(qc->tf.protocol);
1869 const u32 cmd_fis_len = 5; /* five dwords */
1870 unsigned int n_elem;
1873 * Fill in command table information. First, the header,
1874 * a SATA Register - Host to Device command FIS.
1876 cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
1878 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
1880 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
1881 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
1885 if (qc->flags & ATA_QCFLAG_DMAMAP)
1886 n_elem = ahci_fill_sg(qc, cmd_tbl);
1889 * Fill in command slot information.
1891 opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
1892 if (qc->tf.flags & ATA_TFLAG_WRITE)
1893 opts |= AHCI_CMD_WRITE;
1895 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
1897 ahci_fill_cmd_slot(pp, qc->tag, opts);
1900 static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
1902 struct ahci_host_priv *hpriv = ap->host->private_data;
1903 struct ahci_port_priv *pp = ap->private_data;
1904 struct ata_eh_info *host_ehi = &ap->link.eh_info;
1905 struct ata_link *link = NULL;
1906 struct ata_queued_cmd *active_qc;
1907 struct ata_eh_info *active_ehi;
1910 /* determine active link */
1911 ata_port_for_each_link(link, ap)
1912 if (ata_link_active(link))
1917 active_qc = ata_qc_from_tag(ap, link->active_tag);
1918 active_ehi = &link->eh_info;
1920 /* record irq stat */
1921 ata_ehi_clear_desc(host_ehi);
1922 ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
1924 /* AHCI needs SError cleared; otherwise, it might lock up */
1925 ahci_scr_read(ap, SCR_ERROR, &serror);
1926 ahci_scr_write(ap, SCR_ERROR, serror);
1927 host_ehi->serror |= serror;
1929 /* some controllers set IRQ_IF_ERR on device errors, ignore it */
1930 if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
1931 irq_stat &= ~PORT_IRQ_IF_ERR;
1933 if (irq_stat & PORT_IRQ_TF_ERR) {
1934 /* If qc is active, charge it; otherwise, the active
1935 * link. There's no active qc on NCQ errors. It will
1936 * be determined by EH by reading log page 10h.
1939 active_qc->err_mask |= AC_ERR_DEV;
1941 active_ehi->err_mask |= AC_ERR_DEV;
1943 if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
1944 host_ehi->serror &= ~SERR_INTERNAL;
1947 if (irq_stat & PORT_IRQ_UNK_FIS) {
1948 u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
1950 active_ehi->err_mask |= AC_ERR_HSM;
1951 active_ehi->action |= ATA_EH_RESET;
1952 ata_ehi_push_desc(active_ehi,
1953 "unknown FIS %08x %08x %08x %08x" ,
1954 unk[0], unk[1], unk[2], unk[3]);
1957 if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
1958 active_ehi->err_mask |= AC_ERR_HSM;
1959 active_ehi->action |= ATA_EH_RESET;
1960 ata_ehi_push_desc(active_ehi, "incorrect PMP");
1963 if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
1964 host_ehi->err_mask |= AC_ERR_HOST_BUS;
1965 host_ehi->action |= ATA_EH_RESET;
1966 ata_ehi_push_desc(host_ehi, "host bus error");
1969 if (irq_stat & PORT_IRQ_IF_ERR) {
1970 host_ehi->err_mask |= AC_ERR_ATA_BUS;
1971 host_ehi->action |= ATA_EH_RESET;
1972 ata_ehi_push_desc(host_ehi, "interface fatal error");
1975 if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
1976 ata_ehi_hotplugged(host_ehi);
1977 ata_ehi_push_desc(host_ehi, "%s",
1978 irq_stat & PORT_IRQ_CONNECT ?
1979 "connection status changed" : "PHY RDY changed");
1982 /* okay, let's hand over to EH */
1984 if (irq_stat & PORT_IRQ_FREEZE)
1985 ata_port_freeze(ap);
1990 static void ahci_port_intr(struct ata_port *ap)
1992 void __iomem *port_mmio = ahci_port_base(ap);
1993 struct ata_eh_info *ehi = &ap->link.eh_info;
1994 struct ahci_port_priv *pp = ap->private_data;
1995 struct ahci_host_priv *hpriv = ap->host->private_data;
1996 int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
1997 u32 status, qc_active;
2000 status = readl(port_mmio + PORT_IRQ_STAT);
2001 writel(status, port_mmio + PORT_IRQ_STAT);
2003 /* ignore BAD_PMP while resetting */
2004 if (unlikely(resetting))
2005 status &= ~PORT_IRQ_BAD_PMP;
2007 /* If we are getting PhyRdy, this is
2008 * just a power state change, we should
2009 * clear out this, plus the PhyRdy/Comm
2010 * Wake bits from Serror
2012 if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
2013 (status & PORT_IRQ_PHYRDY)) {
2014 status &= ~PORT_IRQ_PHYRDY;
2015 ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
2018 if (unlikely(status & PORT_IRQ_ERROR)) {
2019 ahci_error_intr(ap, status);
2023 if (status & PORT_IRQ_SDB_FIS) {
2024 /* If SNotification is available, leave notification
2025 * handling to sata_async_notification(). If not,
2026 * emulate it by snooping SDB FIS RX area.
2028 * Snooping FIS RX area is probably cheaper than
2029 * poking SNotification but some constrollers which
2030 * implement SNotification, ICH9 for example, don't
2031 * store AN SDB FIS into receive area.
2033 if (hpriv->cap & HOST_CAP_SNTF)
2034 sata_async_notification(ap);
2036 /* If the 'N' bit in word 0 of the FIS is set,
2037 * we just received asynchronous notification.
2038 * Tell libata about it.
2040 const __le32 *f = pp->rx_fis + RX_FIS_SDB;
2041 u32 f0 = le32_to_cpu(f[0]);
2044 sata_async_notification(ap);
2048 /* pp->active_link is valid iff any command is in flight */
2049 if (ap->qc_active && pp->active_link->sactive)
2050 qc_active = readl(port_mmio + PORT_SCR_ACT);
2052 qc_active = readl(port_mmio + PORT_CMD_ISSUE);
2054 rc = ata_qc_complete_multiple(ap, qc_active);
2056 /* while resetting, invalid completions are expected */
2057 if (unlikely(rc < 0 && !resetting)) {
2058 ehi->err_mask |= AC_ERR_HSM;
2059 ehi->action |= ATA_EH_RESET;
2060 ata_port_freeze(ap);
2064 static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
2066 struct ata_host *host = dev_instance;
2067 struct ahci_host_priv *hpriv;
2068 unsigned int i, handled = 0;
2070 u32 irq_stat, irq_masked;
2074 hpriv = host->private_data;
2075 mmio = host->iomap[AHCI_PCI_BAR];
2077 /* sigh. 0xffffffff is a valid return from h/w */
2078 irq_stat = readl(mmio + HOST_IRQ_STAT);
2082 irq_masked = irq_stat & hpriv->port_map;
2084 spin_lock(&host->lock);
2086 for (i = 0; i < host->n_ports; i++) {
2087 struct ata_port *ap;
2089 if (!(irq_masked & (1 << i)))
2092 ap = host->ports[i];
2095 VPRINTK("port %u\n", i);
2097 VPRINTK("port %u (no irq)\n", i);
2098 if (ata_ratelimit())
2099 dev_printk(KERN_WARNING, host->dev,
2100 "interrupt on disabled port %u\n", i);
2106 /* HOST_IRQ_STAT behaves as level triggered latch meaning that
2107 * it should be cleared after all the port events are cleared;
2108 * otherwise, it will raise a spurious interrupt after each
2109 * valid one. Please read section 10.6.2 of ahci 1.1 for more
2112 * Also, use the unmasked value to clear interrupt as spurious
2113 * pending event on a dummy port might cause screaming IRQ.
2115 writel(irq_stat, mmio + HOST_IRQ_STAT);
2117 spin_unlock(&host->lock);
2121 return IRQ_RETVAL(handled);
2124 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
2126 struct ata_port *ap = qc->ap;
2127 void __iomem *port_mmio = ahci_port_base(ap);
2128 struct ahci_port_priv *pp = ap->private_data;
2130 /* Keep track of the currently active link. It will be used
2131 * in completion path to determine whether NCQ phase is in
2134 pp->active_link = qc->dev->link;
2136 if (qc->tf.protocol == ATA_PROT_NCQ)
2137 writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
2138 writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
2140 ahci_sw_activity(qc->dev->link);
2145 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
2147 struct ahci_port_priv *pp = qc->ap->private_data;
2148 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
2150 ata_tf_from_fis(d2h_fis, &qc->result_tf);
2154 static void ahci_freeze(struct ata_port *ap)
2156 void __iomem *port_mmio = ahci_port_base(ap);
2159 writel(0, port_mmio + PORT_IRQ_MASK);
2162 static void ahci_thaw(struct ata_port *ap)
2164 void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
2165 void __iomem *port_mmio = ahci_port_base(ap);
2167 struct ahci_port_priv *pp = ap->private_data;
2170 tmp = readl(port_mmio + PORT_IRQ_STAT);
2171 writel(tmp, port_mmio + PORT_IRQ_STAT);
2172 writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
2174 /* turn IRQ back on */
2175 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2178 static void ahci_error_handler(struct ata_port *ap)
2180 if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
2181 /* restart engine */
2182 ahci_stop_engine(ap);
2183 ahci_start_engine(ap);
2186 sata_pmp_error_handler(ap);
2189 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
2191 struct ata_port *ap = qc->ap;
2193 /* make DMA engine forget about the failed command */
2194 if (qc->flags & ATA_QCFLAG_FAILED)
2195 ahci_kick_engine(ap, 1);
2198 static void ahci_pmp_attach(struct ata_port *ap)
2200 void __iomem *port_mmio = ahci_port_base(ap);
2201 struct ahci_port_priv *pp = ap->private_data;
2204 cmd = readl(port_mmio + PORT_CMD);
2205 cmd |= PORT_CMD_PMP;
2206 writel(cmd, port_mmio + PORT_CMD);
2208 pp->intr_mask |= PORT_IRQ_BAD_PMP;
2209 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2212 static void ahci_pmp_detach(struct ata_port *ap)
2214 void __iomem *port_mmio = ahci_port_base(ap);
2215 struct ahci_port_priv *pp = ap->private_data;
2218 cmd = readl(port_mmio + PORT_CMD);
2219 cmd &= ~PORT_CMD_PMP;
2220 writel(cmd, port_mmio + PORT_CMD);
2222 pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
2223 writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2226 static int ahci_port_resume(struct ata_port *ap)
2229 ahci_start_port(ap);
2231 if (sata_pmp_attached(ap))
2232 ahci_pmp_attach(ap);
2234 ahci_pmp_detach(ap);
2240 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
2242 const char *emsg = NULL;
2245 rc = ahci_deinit_port(ap, &emsg);
2247 ahci_power_down(ap);
2249 ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
2250 ahci_start_port(ap);
2256 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
2258 struct ata_host *host = dev_get_drvdata(&pdev->dev);
2259 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2262 if (mesg.event & PM_EVENT_SLEEP) {
2263 /* AHCI spec rev1.1 section 8.3.3:
2264 * Software must disable interrupts prior to requesting a
2265 * transition of the HBA to D3 state.
2267 ctl = readl(mmio + HOST_CTL);
2268 ctl &= ~HOST_IRQ_EN;
2269 writel(ctl, mmio + HOST_CTL);
2270 readl(mmio + HOST_CTL); /* flush */
2273 return ata_pci_device_suspend(pdev, mesg);
2276 static int ahci_pci_device_resume(struct pci_dev *pdev)
2278 struct ata_host *host = dev_get_drvdata(&pdev->dev);
2281 rc = ata_pci_device_do_resume(pdev);
2285 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
2286 rc = ahci_reset_controller(host);
2290 ahci_init_controller(host);
2293 ata_host_resume(host);
2299 static int ahci_port_start(struct ata_port *ap)
2301 struct device *dev = ap->host->dev;
2302 struct ahci_port_priv *pp;
2306 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
2310 mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
2314 memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
2317 * First item in chunk of DMA memory: 32-slot command table,
2318 * 32 bytes each in size
2321 pp->cmd_slot_dma = mem_dma;
2323 mem += AHCI_CMD_SLOT_SZ;
2324 mem_dma += AHCI_CMD_SLOT_SZ;
2327 * Second item: Received-FIS area
2330 pp->rx_fis_dma = mem_dma;
2332 mem += AHCI_RX_FIS_SZ;
2333 mem_dma += AHCI_RX_FIS_SZ;
2336 * Third item: data area for storing a single command
2337 * and its scatter-gather table
2340 pp->cmd_tbl_dma = mem_dma;
2343 * Save off initial list of interrupts to be enabled.
2344 * This could be changed later
2346 pp->intr_mask = DEF_PORT_IRQ;
2348 ap->private_data = pp;
2350 /* engage engines, captain */
2351 return ahci_port_resume(ap);
2354 static void ahci_port_stop(struct ata_port *ap)
2356 const char *emsg = NULL;
2359 /* de-initialize port */
2360 rc = ahci_deinit_port(ap, &emsg);
2362 ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
2365 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
2370 !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
2371 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
2373 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
2375 dev_printk(KERN_ERR, &pdev->dev,
2376 "64-bit DMA enable failed\n");
2381 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
2383 dev_printk(KERN_ERR, &pdev->dev,
2384 "32-bit DMA enable failed\n");
2387 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
2389 dev_printk(KERN_ERR, &pdev->dev,
2390 "32-bit consistent DMA enable failed\n");
2397 static void ahci_print_info(struct ata_host *host)
2399 struct ahci_host_priv *hpriv = host->private_data;
2400 struct pci_dev *pdev = to_pci_dev(host->dev);
2401 void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2402 u32 vers, cap, impl, speed;
2403 const char *speed_s;
2407 vers = readl(mmio + HOST_VERSION);
2409 impl = hpriv->port_map;
2411 speed = (cap >> 20) & 0xf;
2414 else if (speed == 2)
2419 pci_read_config_word(pdev, 0x0a, &cc);
2420 if (cc == PCI_CLASS_STORAGE_IDE)
2422 else if (cc == PCI_CLASS_STORAGE_SATA)
2424 else if (cc == PCI_CLASS_STORAGE_RAID)
2429 dev_printk(KERN_INFO, &pdev->dev,
2430 "AHCI %02x%02x.%02x%02x "
2431 "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
2434 (vers >> 24) & 0xff,
2435 (vers >> 16) & 0xff,
2439 ((cap >> 8) & 0x1f) + 1,
2445 dev_printk(KERN_INFO, &pdev->dev,
2452 cap & (1 << 31) ? "64bit " : "",
2453 cap & (1 << 30) ? "ncq " : "",
2454 cap & (1 << 29) ? "sntf " : "",
2455 cap & (1 << 28) ? "ilck " : "",
2456 cap & (1 << 27) ? "stag " : "",
2457 cap & (1 << 26) ? "pm " : "",
2458 cap & (1 << 25) ? "led " : "",
2460 cap & (1 << 24) ? "clo " : "",
2461 cap & (1 << 19) ? "nz " : "",
2462 cap & (1 << 18) ? "only " : "",
2463 cap & (1 << 17) ? "pmp " : "",
2464 cap & (1 << 15) ? "pio " : "",
2465 cap & (1 << 14) ? "slum " : "",
2466 cap & (1 << 13) ? "part " : "",
2467 cap & (1 << 6) ? "ems ": ""
2471 /* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
2472 * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
2473 * support PMP and the 4726 either directly exports the device
2474 * attached to the first downstream port or acts as a hardware storage
2475 * controller and emulate a single ATA device (can be RAID 0/1 or some
2476 * other configuration).
2478 * When there's no device attached to the first downstream port of the
2479 * 4726, "Config Disk" appears, which is a pseudo ATA device to
2480 * configure the 4726. However, ATA emulation of the device is very
2481 * lame. It doesn't send signature D2H Reg FIS after the initial
2482 * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
2484 * The following function works around the problem by always using
2485 * hardreset on the port and not depending on receiving signature FIS
2486 * afterward. If signature FIS isn't received soon, ATA class is
2487 * assumed without follow-up softreset.
2489 static void ahci_p5wdh_workaround(struct ata_host *host)
2491 static struct dmi_system_id sysids[] = {
2493 .ident = "P5W DH Deluxe",
2495 DMI_MATCH(DMI_SYS_VENDOR,
2496 "ASUSTEK COMPUTER INC"),
2497 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
2502 struct pci_dev *pdev = to_pci_dev(host->dev);
2504 if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
2505 dmi_check_system(sysids)) {
2506 struct ata_port *ap = host->ports[1];
2508 dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
2509 "Deluxe on-board SIMG4726 workaround\n");
2511 ap->ops = &ahci_p5wdh_ops;
2512 ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
2516 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
2518 static int printed_version;
2519 unsigned int board_id = ent->driver_data;
2520 struct ata_port_info pi = ahci_port_info[board_id];
2521 const struct ata_port_info *ppi[] = { &pi, NULL };
2522 struct device *dev = &pdev->dev;
2523 struct ahci_host_priv *hpriv;
2524 struct ata_host *host;
2529 WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
2531 if (!printed_version++)
2532 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
2534 /* acquire resources */
2535 rc = pcim_enable_device(pdev);
2539 /* AHCI controllers often implement SFF compatible interface.
2540 * Grab all PCI BARs just in case.
2542 rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
2544 pcim_pin_device(pdev);
2548 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
2549 (pdev->device == 0x2652 || pdev->device == 0x2653)) {
2552 /* ICH6s share the same PCI ID for both piix and ahci
2553 * modes. Enabling ahci mode while MAP indicates
2554 * combined mode is a bad idea. Yield to ata_piix.
2556 pci_read_config_byte(pdev, ICH_MAP, &map);
2558 dev_printk(KERN_INFO, &pdev->dev, "controller is in "
2559 "combined mode, can't enable AHCI mode\n");
2564 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
2567 hpriv->flags |= (unsigned long)pi.private_data;
2569 /* MCP65 revision A1 and A2 can't do MSI */
2570 if (board_id == board_ahci_mcp65 &&
2571 (pdev->revision == 0xa1 || pdev->revision == 0xa2))
2572 hpriv->flags |= AHCI_HFLAG_NO_MSI;
2574 if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
2577 /* save initial config */
2578 ahci_save_initial_config(pdev, hpriv);
2581 if (hpriv->cap & HOST_CAP_NCQ)
2582 pi.flags |= ATA_FLAG_NCQ;
2584 if (hpriv->cap & HOST_CAP_PMP)
2585 pi.flags |= ATA_FLAG_PMP;
2587 if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
2589 void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
2590 u32 em_loc = readl(mmio + HOST_EM_LOC);
2591 u32 em_ctl = readl(mmio + HOST_EM_CTL);
2593 messages = (em_ctl & 0x000f0000) >> 16;
2595 /* we only support LED message type right now */
2596 if ((messages & 0x01) && (ahci_em_messages == 1)) {
2598 hpriv->em_loc = ((em_loc >> 16) * 4);
2599 pi.flags |= ATA_FLAG_EM;
2600 if (!(em_ctl & EM_CTL_ALHD))
2601 pi.flags |= ATA_FLAG_SW_ACTIVITY;
2605 /* CAP.NP sometimes indicate the index of the last enabled
2606 * port, at other times, that of the last possible port, so
2607 * determining the maximum port number requires looking at
2608 * both CAP.NP and port_map.
2610 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
2612 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
2615 host->iomap = pcim_iomap_table(pdev);
2616 host->private_data = hpriv;
2618 if (pi.flags & ATA_FLAG_EM)
2619 ahci_reset_em(host);
2621 for (i = 0; i < host->n_ports; i++) {
2622 struct ata_port *ap = host->ports[i];
2624 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
2625 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
2626 0x100 + ap->port_no * 0x80, "port");
2628 /* set initial link pm policy */
2629 ap->pm_policy = NOT_AVAILABLE;
2631 /* set enclosure management message type */
2632 if (ap->flags & ATA_FLAG_EM)
2633 ap->em_message_type = ahci_em_messages;
2636 /* disabled/not-implemented port */
2637 if (!(hpriv->port_map & (1 << i)))
2638 ap->ops = &ata_dummy_port_ops;
2641 /* apply workaround for ASUS P5W DH Deluxe mainboard */
2642 ahci_p5wdh_workaround(host);
2644 /* initialize adapter */
2645 rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
2649 rc = ahci_reset_controller(host);
2653 ahci_init_controller(host);
2654 ahci_print_info(host);
2656 pci_set_master(pdev);
2657 return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
2661 static int __init ahci_init(void)
2663 return pci_register_driver(&ahci_pci_driver);
2666 static void __exit ahci_exit(void)
2668 pci_unregister_driver(&ahci_pci_driver);
2672 MODULE_AUTHOR("Jeff Garzik");
2673 MODULE_DESCRIPTION("AHCI SATA low-level driver");
2674 MODULE_LICENSE("GPL");
2675 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
2676 MODULE_VERSION(DRV_VERSION);
2678 module_init(ahci_init);
2679 module_exit(ahci_exit);