err.no Git - linux-2.6/blob - drivers/acpi/utilities/utxface.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utxface - External interfaces for "global" ACPI functions
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2007, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acevents.h>
  46 #include <acpi/acnamesp.h>
  47 #include <acpi/acdebug.h>
  48
  49 #define _COMPONENT          ACPI_UTILITIES
  50 ACPI_MODULE_NAME("utxface")
  51
  52 /*******************************************************************************
  53  *
  54  * FUNCTION:    acpi_initialize_subsystem
  55  *
  56  * PARAMETERS:  None
  57  *
  58  * RETURN:      Status
  59  *
  60  * DESCRIPTION: Initializes all global variables.  This is the first function
  61  *              called, so any early initialization belongs here.
  62  *
  63  ******************************************************************************/
  64 acpi_status __init acpi_initialize_subsystem(void)
  65 {
  66         acpi_status status;
  67
  68         ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
  69
  70         acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
  71         ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
  72
  73         /* Initialize the OS-Dependent layer */
  74
  75         status = acpi_os_initialize();
  76         if (ACPI_FAILURE(status)) {
  77                 ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
  78                 return_ACPI_STATUS(status);
  79         }
  80
  81         /* Initialize all globals used by the subsystem */
  82
  83         acpi_ut_init_globals();
  84
  85         /* Create the default mutex objects */
  86
  87         status = acpi_ut_mutex_initialize();
  88         if (ACPI_FAILURE(status)) {
  89                 ACPI_EXCEPTION((AE_INFO, status,
  90                                 "During Global Mutex creation"));
  91                 return_ACPI_STATUS(status);
  92         }
  93
  94         /*
  95          * Initialize the namespace manager and
  96          * the root of the namespace tree
  97          */
  98         status = acpi_ns_root_initialize();
  99         if (ACPI_FAILURE(status)) {
 100                 ACPI_EXCEPTION((AE_INFO, status,
 101                                 "During Namespace initialization"));
 102                 return_ACPI_STATUS(status);
 103         }
 104
 105         /* If configured, initialize the AML debugger */
 106
 107         ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
 108         return_ACPI_STATUS(status);
 109 }
 110
 111 /*******************************************************************************
 112  *
 113  * FUNCTION:    acpi_enable_subsystem
 114  *
 115  * PARAMETERS:  Flags           - Init/enable Options
 116  *
 117  * RETURN:      Status
 118  *
 119  * DESCRIPTION: Completes the subsystem initialization including hardware.
 120  *              Puts system into ACPI mode if it isn't already.
 121  *
 122  ******************************************************************************/
 123 acpi_status acpi_enable_subsystem(u32 flags)
 124 {
 125         acpi_status status = AE_OK;
 126
 127         ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
 128
 129         /* Enable ACPI mode */
 130
 131         if (!(flags & ACPI_NO_ACPI_ENABLE)) {
 132                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 133                                   "[Init] Going into ACPI mode\n"));
 134
 135                 acpi_gbl_original_mode = acpi_hw_get_mode();
 136
 137                 status = acpi_enable();
 138                 if (ACPI_FAILURE(status)) {
 139                         ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
 140                         return_ACPI_STATUS(status);
 141                 }
 142         }
 143
 144         /*
 145          * Install the default op_region handlers. These are installed unless
 146          * other handlers have already been installed via the
 147          * install_address_space_handler interface.
 148          */
 149         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
 150                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 151                                   "[Init] Installing default address space handlers\n"));
 152
 153                 status = acpi_ev_install_region_handlers();
 154                 if (ACPI_FAILURE(status)) {
 155                         return_ACPI_STATUS(status);
 156                 }
 157         }
 158
 159         /*
 160          * Initialize ACPI Event handling (Fixed and General Purpose)
 161          *
 162          * Note1: We must have the hardware and events initialized before we can
 163          * execute any control methods safely. Any control method can require
 164          * ACPI hardware support, so the hardware must be fully initialized before
 165          * any method execution!
 166          *
 167          * Note2: Fixed events are initialized and enabled here. GPEs are
 168          * initialized, but cannot be enabled until after the hardware is
 169          * completely initialized (SCI and global_lock activated)
 170          */
 171         if (!(flags & ACPI_NO_EVENT_INIT)) {
 172                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 173                                   "[Init] Initializing ACPI events\n"));
 174
 175                 status = acpi_ev_initialize_events();
 176                 if (ACPI_FAILURE(status)) {
 177                         return_ACPI_STATUS(status);
 178                 }
 179         }
 180
 181         /*
 182          * Install the SCI handler and Global Lock handler. This completes the
 183          * hardware initialization.
 184          */
 185         if (!(flags & ACPI_NO_HANDLER_INIT)) {
 186                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 187                                   "[Init] Installing SCI/GL handlers\n"));
 188
 189                 status = acpi_ev_install_xrupt_handlers();
 190                 if (ACPI_FAILURE(status)) {
 191                         return_ACPI_STATUS(status);
 192                 }
 193         }
 194
 195         /*
 196          * Complete the GPE initialization for the GPE blocks defined in the FADT
 197          * (GPE block 0 and 1).
 198          *
 199          * Note1: This is where the _PRW methods are executed for the GPEs. These
 200          * methods can only be executed after the SCI and Global Lock handlers are
 201          * installed and initialized.
 202          *
 203          * Note2: Currently, there seems to be no need to run the _REG methods
 204          * before execution of the _PRW methods and enabling of the GPEs.
 205          */
 206         if (!(flags & ACPI_NO_EVENT_INIT)) {
 207                 status = acpi_ev_install_fadt_gpes();
 208                 if (ACPI_FAILURE(status)) {
 209                         return (status);
 210                 }
 211         }
 212
 213         return_ACPI_STATUS(status);
 214 }
 215
 216 ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
 217
 218 /*******************************************************************************
 219  *
 220  * FUNCTION:    acpi_initialize_objects
 221  *
 222  * PARAMETERS:  Flags           - Init/enable Options
 223  *
 224  * RETURN:      Status
 225  *
 226  * DESCRIPTION: Completes namespace initialization by initializing device
 227  *              objects and executing AML code for Regions, buffers, etc.
 228  *
 229  ******************************************************************************/
 230 acpi_status acpi_initialize_objects(u32 flags)
 231 {
 232         acpi_status status = AE_OK;
 233
 234         ACPI_FUNCTION_TRACE(acpi_initialize_objects);
 235
 236         /*
 237          * Run all _REG methods
 238          *
 239          * Note: Any objects accessed by the _REG methods will be automatically
 240          * initialized, even if they contain executable AML (see the call to
 241          * acpi_ns_initialize_objects below).
 242          */
 243         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
 244                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 245                                   "[Init] Executing _REG OpRegion methods\n"));
 246
 247                 status = acpi_ev_initialize_op_regions();
 248                 if (ACPI_FAILURE(status)) {
 249                         return_ACPI_STATUS(status);
 250                 }
 251         }
 252
 253         /*
 254          * Initialize the objects that remain uninitialized. This runs the
 255          * executable AML that may be part of the declaration of these objects:
 256          * operation_regions, buffer_fields, Buffers, and Packages.
 257          */
 258         if (!(flags & ACPI_NO_OBJECT_INIT)) {
 259                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 260                                   "[Init] Completing Initialization of ACPI Objects\n"));
 261
 262                 status = acpi_ns_initialize_objects();
 263                 if (ACPI_FAILURE(status)) {
 264                         return_ACPI_STATUS(status);
 265                 }
 266         }
 267
 268         /*
 269          * Initialize all device objects in the namespace. This runs the device
 270          * _STA and _INI methods.
 271          */
 272         if (!(flags & ACPI_NO_DEVICE_INIT)) {
 273                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 274                                   "[Init] Initializing ACPI Devices\n"));
 275
 276                 status = acpi_ns_initialize_devices();
 277                 if (ACPI_FAILURE(status)) {
 278                         return_ACPI_STATUS(status);
 279                 }
 280         }
 281
 282         /*
 283          * Empty the caches (delete the cached objects) on the assumption that
 284          * the table load filled them up more than they will be at runtime --
 285          * thus wasting non-paged memory.
 286          */
 287         status = acpi_purge_cached_objects();
 288
 289         acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
 290         return_ACPI_STATUS(status);
 291 }
 292
 293 ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
 294
 295 /*******************************************************************************
 296  *
 297  * FUNCTION:    acpi_terminate
 298  *
 299  * PARAMETERS:  None
 300  *
 301  * RETURN:      Status
 302  *
 303  * DESCRIPTION: Shutdown the ACPI subsystem.  Release all resources.
 304  *
 305  ******************************************************************************/
 306 acpi_status acpi_terminate(void)
 307 {
 308         acpi_status status;
 309
 310         ACPI_FUNCTION_TRACE(acpi_terminate);
 311
 312         /* Terminate the AML Debugger if present */
 313
 314         ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
 315
 316         /* Shutdown and free all resources */
 317
 318         acpi_ut_subsystem_shutdown();
 319
 320         /* Free the mutex objects */
 321
 322         acpi_ut_mutex_terminate();
 323
 324 #ifdef ACPI_DEBUGGER
 325
 326         /* Shut down the debugger */
 327
 328         acpi_db_terminate();
 329 #endif
 330
 331         /* Now we can shutdown the OS-dependent layer */
 332
 333         status = acpi_os_terminate();
 334         return_ACPI_STATUS(status);
 335 }
 336
 337 ACPI_EXPORT_SYMBOL(acpi_terminate)
 338 #ifdef ACPI_FUTURE_USAGE
 339 /*******************************************************************************
 340  *
 341  * FUNCTION:    acpi_subsystem_status
 342  *
 343  * PARAMETERS:  None
 344  *
 345  * RETURN:      Status of the ACPI subsystem
 346  *
 347  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
 348  *              before making any other calls, to ensure the subsystem
 349  *              initialized successfully.
 350  *
 351  ******************************************************************************/
 352 acpi_status acpi_subsystem_status(void)
 353 {
 354
 355         if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
 356                 return (AE_OK);
 357         } else {
 358                 return (AE_ERROR);
 359         }
 360 }
 361
 362 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
 363
 364 /*******************************************************************************
 365  *
 366  * FUNCTION:    acpi_get_system_info
 367  *
 368  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
 369  *                                device
 370  *
 371  * RETURN:      Status          - the status of the call
 372  *
 373  * DESCRIPTION: This function is called to get information about the current
 374  *              state of the ACPI subsystem.  It will return system information
 375  *              in the out_buffer.
 376  *
 377  *              If the function fails an appropriate status will be returned
 378  *              and the value of out_buffer is undefined.
 379  *
 380  ******************************************************************************/
 381 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
 382 {
 383         struct acpi_system_info *info_ptr;
 384         acpi_status status;
 385
 386         ACPI_FUNCTION_TRACE(acpi_get_system_info);
 387
 388         /* Parameter validation */
 389
 390         status = acpi_ut_validate_buffer(out_buffer);
 391         if (ACPI_FAILURE(status)) {
 392                 return_ACPI_STATUS(status);
 393         }
 394
 395         /* Validate/Allocate/Clear caller buffer */
 396
 397         status =
 398             acpi_ut_initialize_buffer(out_buffer,
 399                                       sizeof(struct acpi_system_info));
 400         if (ACPI_FAILURE(status)) {
 401                 return_ACPI_STATUS(status);
 402         }
 403
 404         /*
 405          * Populate the return buffer
 406          */
 407         info_ptr = (struct acpi_system_info *)out_buffer->pointer;
 408
 409         info_ptr->acpi_ca_version = ACPI_CA_VERSION;
 410
 411         /* System flags (ACPI capabilities) */
 412
 413         info_ptr->flags = ACPI_SYS_MODE_ACPI;
 414
 415         /* Timer resolution - 24 or 32 bits  */
 416
 417         if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
 418                 info_ptr->timer_resolution = 24;
 419         } else {
 420                 info_ptr->timer_resolution = 32;
 421         }
 422
 423         /* Clear the reserved fields */
 424
 425         info_ptr->reserved1 = 0;
 426         info_ptr->reserved2 = 0;
 427
 428         /* Current debug levels */
 429
 430         info_ptr->debug_layer = acpi_dbg_layer;
 431         info_ptr->debug_level = acpi_dbg_level;
 432
 433         return_ACPI_STATUS(AE_OK);
 434 }
 435
 436 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
 437
 438 /*****************************************************************************
 439  *
 440  * FUNCTION:    acpi_install_initialization_handler
 441  *
 442  * PARAMETERS:  Handler             - Callback procedure
 443  *              Function            - Not (currently) used, see below
 444  *
 445  * RETURN:      Status
 446  *
 447  * DESCRIPTION: Install an initialization handler
 448  *
 449  * TBD: When a second function is added, must save the Function also.
 450  *
 451  ****************************************************************************/
 452 acpi_status
 453 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
 454 {
 455
 456         if (!handler) {
 457                 return (AE_BAD_PARAMETER);
 458         }
 459
 460         if (acpi_gbl_init_handler) {
 461                 return (AE_ALREADY_EXISTS);
 462         }
 463
 464         acpi_gbl_init_handler = handler;
 465         return AE_OK;
 466 }
 467
 468 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
 469 #endif                          /*  ACPI_FUTURE_USAGE  */
 470 /*****************************************************************************
 471  *
 472  * FUNCTION:    acpi_purge_cached_objects
 473  *
 474  * PARAMETERS:  None
 475  *
 476  * RETURN:      Status
 477  *
 478  * DESCRIPTION: Empty all caches (delete the cached objects)
 479  *
 480  ****************************************************************************/
 481 acpi_status acpi_purge_cached_objects(void)
 482 {
 483         ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
 484
 485         (void)acpi_os_purge_cache(acpi_gbl_state_cache);
 486         (void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 487         (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 488         (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
 489         return_ACPI_STATUS(AE_OK);
 490 }
 491
 492 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)