]> err.no Git - linux-2.6/blob - drivers/acpi/utilities/utxface.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-2.6] / drivers / acpi / utilities / utxface.c
1 /******************************************************************************
2  *
3  * Module Name: utxface - External interfaces for "global" ACPI functions
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2007, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47 #include <acpi/acdebug.h>
48
49 #define _COMPONENT          ACPI_UTILITIES
50 ACPI_MODULE_NAME("utxface")
51
52 /*******************************************************************************
53  *
54  * FUNCTION:    acpi_initialize_subsystem
55  *
56  * PARAMETERS:  None
57  *
58  * RETURN:      Status
59  *
60  * DESCRIPTION: Initializes all global variables.  This is the first function
61  *              called, so any early initialization belongs here.
62  *
63  ******************************************************************************/
64 acpi_status __init acpi_initialize_subsystem(void)
65 {
66         acpi_status status;
67
68         ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
69
70         acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
71         ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
72
73         /* Initialize the OS-Dependent layer */
74
75         status = acpi_os_initialize();
76         if (ACPI_FAILURE(status)) {
77                 ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
78                 return_ACPI_STATUS(status);
79         }
80
81         /* Initialize all globals used by the subsystem */
82
83         acpi_ut_init_globals();
84
85         /* Create the default mutex objects */
86
87         status = acpi_ut_mutex_initialize();
88         if (ACPI_FAILURE(status)) {
89                 ACPI_EXCEPTION((AE_INFO, status,
90                                 "During Global Mutex creation"));
91                 return_ACPI_STATUS(status);
92         }
93
94         /*
95          * Initialize the namespace manager and
96          * the root of the namespace tree
97          */
98         status = acpi_ns_root_initialize();
99         if (ACPI_FAILURE(status)) {
100                 ACPI_EXCEPTION((AE_INFO, status,
101                                 "During Namespace initialization"));
102                 return_ACPI_STATUS(status);
103         }
104
105         /* If configured, initialize the AML debugger */
106
107         ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
108         return_ACPI_STATUS(status);
109 }
110
111 /*******************************************************************************
112  *
113  * FUNCTION:    acpi_enable_subsystem
114  *
115  * PARAMETERS:  Flags           - Init/enable Options
116  *
117  * RETURN:      Status
118  *
119  * DESCRIPTION: Completes the subsystem initialization including hardware.
120  *              Puts system into ACPI mode if it isn't already.
121  *
122  ******************************************************************************/
123 acpi_status acpi_enable_subsystem(u32 flags)
124 {
125         acpi_status status = AE_OK;
126
127         ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
128
129         /* Enable ACPI mode */
130
131         if (!(flags & ACPI_NO_ACPI_ENABLE)) {
132                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
133                                   "[Init] Going into ACPI mode\n"));
134
135                 acpi_gbl_original_mode = acpi_hw_get_mode();
136
137                 status = acpi_enable();
138                 if (ACPI_FAILURE(status)) {
139                         ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
140                         return_ACPI_STATUS(status);
141                 }
142         }
143
144         /*
145          * Install the default op_region handlers. These are installed unless
146          * other handlers have already been installed via the
147          * install_address_space_handler interface.
148          */
149         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
150                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
151                                   "[Init] Installing default address space handlers\n"));
152
153                 status = acpi_ev_install_region_handlers();
154                 if (ACPI_FAILURE(status)) {
155                         return_ACPI_STATUS(status);
156                 }
157         }
158
159         /*
160          * Initialize ACPI Event handling (Fixed and General Purpose)
161          *
162          * Note1: We must have the hardware and events initialized before we can
163          * execute any control methods safely. Any control method can require
164          * ACPI hardware support, so the hardware must be fully initialized before
165          * any method execution!
166          *
167          * Note2: Fixed events are initialized and enabled here. GPEs are
168          * initialized, but cannot be enabled until after the hardware is
169          * completely initialized (SCI and global_lock activated)
170          */
171         if (!(flags & ACPI_NO_EVENT_INIT)) {
172                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
173                                   "[Init] Initializing ACPI events\n"));
174
175                 status = acpi_ev_initialize_events();
176                 if (ACPI_FAILURE(status)) {
177                         return_ACPI_STATUS(status);
178                 }
179         }
180
181         /*
182          * Install the SCI handler and Global Lock handler. This completes the
183          * hardware initialization.
184          */
185         if (!(flags & ACPI_NO_HANDLER_INIT)) {
186                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
187                                   "[Init] Installing SCI/GL handlers\n"));
188
189                 status = acpi_ev_install_xrupt_handlers();
190                 if (ACPI_FAILURE(status)) {
191                         return_ACPI_STATUS(status);
192                 }
193         }
194
195         /*
196          * Complete the GPE initialization for the GPE blocks defined in the FADT
197          * (GPE block 0 and 1).
198          *
199          * Note1: This is where the _PRW methods are executed for the GPEs. These
200          * methods can only be executed after the SCI and Global Lock handlers are
201          * installed and initialized.
202          *
203          * Note2: Currently, there seems to be no need to run the _REG methods
204          * before execution of the _PRW methods and enabling of the GPEs.
205          */
206         if (!(flags & ACPI_NO_EVENT_INIT)) {
207                 status = acpi_ev_install_fadt_gpes();
208                 if (ACPI_FAILURE(status)) {
209                         return (status);
210                 }
211         }
212
213         return_ACPI_STATUS(status);
214 }
215
216 ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
217
218 /*******************************************************************************
219  *
220  * FUNCTION:    acpi_initialize_objects
221  *
222  * PARAMETERS:  Flags           - Init/enable Options
223  *
224  * RETURN:      Status
225  *
226  * DESCRIPTION: Completes namespace initialization by initializing device
227  *              objects and executing AML code for Regions, buffers, etc.
228  *
229  ******************************************************************************/
230 acpi_status acpi_initialize_objects(u32 flags)
231 {
232         acpi_status status = AE_OK;
233
234         ACPI_FUNCTION_TRACE(acpi_initialize_objects);
235
236         /*
237          * Run all _REG methods
238          *
239          * Note: Any objects accessed by the _REG methods will be automatically
240          * initialized, even if they contain executable AML (see the call to
241          * acpi_ns_initialize_objects below).
242          */
243         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
244                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
245                                   "[Init] Executing _REG OpRegion methods\n"));
246
247                 status = acpi_ev_initialize_op_regions();
248                 if (ACPI_FAILURE(status)) {
249                         return_ACPI_STATUS(status);
250                 }
251         }
252
253         /*
254          * Initialize the objects that remain uninitialized. This runs the
255          * executable AML that may be part of the declaration of these objects:
256          * operation_regions, buffer_fields, Buffers, and Packages.
257          */
258         if (!(flags & ACPI_NO_OBJECT_INIT)) {
259                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
260                                   "[Init] Completing Initialization of ACPI Objects\n"));
261
262                 status = acpi_ns_initialize_objects();
263                 if (ACPI_FAILURE(status)) {
264                         return_ACPI_STATUS(status);
265                 }
266         }
267
268         /*
269          * Initialize all device objects in the namespace. This runs the device
270          * _STA and _INI methods.
271          */
272         if (!(flags & ACPI_NO_DEVICE_INIT)) {
273                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
274                                   "[Init] Initializing ACPI Devices\n"));
275
276                 status = acpi_ns_initialize_devices();
277                 if (ACPI_FAILURE(status)) {
278                         return_ACPI_STATUS(status);
279                 }
280         }
281
282         /*
283          * Empty the caches (delete the cached objects) on the assumption that
284          * the table load filled them up more than they will be at runtime --
285          * thus wasting non-paged memory.
286          */
287         status = acpi_purge_cached_objects();
288
289         acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
290         return_ACPI_STATUS(status);
291 }
292
293 ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
294
295 /*******************************************************************************
296  *
297  * FUNCTION:    acpi_terminate
298  *
299  * PARAMETERS:  None
300  *
301  * RETURN:      Status
302  *
303  * DESCRIPTION: Shutdown the ACPI subsystem.  Release all resources.
304  *
305  ******************************************************************************/
306 acpi_status acpi_terminate(void)
307 {
308         acpi_status status;
309
310         ACPI_FUNCTION_TRACE(acpi_terminate);
311
312         /* Terminate the AML Debugger if present */
313
314         ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
315
316         /* Shutdown and free all resources */
317
318         acpi_ut_subsystem_shutdown();
319
320         /* Free the mutex objects */
321
322         acpi_ut_mutex_terminate();
323
324 #ifdef ACPI_DEBUGGER
325
326         /* Shut down the debugger */
327
328         acpi_db_terminate();
329 #endif
330
331         /* Now we can shutdown the OS-dependent layer */
332
333         status = acpi_os_terminate();
334         return_ACPI_STATUS(status);
335 }
336
337 ACPI_EXPORT_SYMBOL(acpi_terminate)
338 #ifdef ACPI_FUTURE_USAGE
339 /*******************************************************************************
340  *
341  * FUNCTION:    acpi_subsystem_status
342  *
343  * PARAMETERS:  None
344  *
345  * RETURN:      Status of the ACPI subsystem
346  *
347  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
348  *              before making any other calls, to ensure the subsystem
349  *              initialized successfully.
350  *
351  ******************************************************************************/
352 acpi_status acpi_subsystem_status(void)
353 {
354
355         if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
356                 return (AE_OK);
357         } else {
358                 return (AE_ERROR);
359         }
360 }
361
362 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
363
364 /*******************************************************************************
365  *
366  * FUNCTION:    acpi_get_system_info
367  *
368  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
369  *                                device
370  *
371  * RETURN:      Status          - the status of the call
372  *
373  * DESCRIPTION: This function is called to get information about the current
374  *              state of the ACPI subsystem.  It will return system information
375  *              in the out_buffer.
376  *
377  *              If the function fails an appropriate status will be returned
378  *              and the value of out_buffer is undefined.
379  *
380  ******************************************************************************/
381 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
382 {
383         struct acpi_system_info *info_ptr;
384         acpi_status status;
385
386         ACPI_FUNCTION_TRACE(acpi_get_system_info);
387
388         /* Parameter validation */
389
390         status = acpi_ut_validate_buffer(out_buffer);
391         if (ACPI_FAILURE(status)) {
392                 return_ACPI_STATUS(status);
393         }
394
395         /* Validate/Allocate/Clear caller buffer */
396
397         status =
398             acpi_ut_initialize_buffer(out_buffer,
399                                       sizeof(struct acpi_system_info));
400         if (ACPI_FAILURE(status)) {
401                 return_ACPI_STATUS(status);
402         }
403
404         /*
405          * Populate the return buffer
406          */
407         info_ptr = (struct acpi_system_info *)out_buffer->pointer;
408
409         info_ptr->acpi_ca_version = ACPI_CA_VERSION;
410
411         /* System flags (ACPI capabilities) */
412
413         info_ptr->flags = ACPI_SYS_MODE_ACPI;
414
415         /* Timer resolution - 24 or 32 bits  */
416
417         if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
418                 info_ptr->timer_resolution = 24;
419         } else {
420                 info_ptr->timer_resolution = 32;
421         }
422
423         /* Clear the reserved fields */
424
425         info_ptr->reserved1 = 0;
426         info_ptr->reserved2 = 0;
427
428         /* Current debug levels */
429
430         info_ptr->debug_layer = acpi_dbg_layer;
431         info_ptr->debug_level = acpi_dbg_level;
432
433         return_ACPI_STATUS(AE_OK);
434 }
435
436 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
437
438 /*****************************************************************************
439  *
440  * FUNCTION:    acpi_install_initialization_handler
441  *
442  * PARAMETERS:  Handler             - Callback procedure
443  *              Function            - Not (currently) used, see below
444  *
445  * RETURN:      Status
446  *
447  * DESCRIPTION: Install an initialization handler
448  *
449  * TBD: When a second function is added, must save the Function also.
450  *
451  ****************************************************************************/
452 acpi_status
453 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
454 {
455
456         if (!handler) {
457                 return (AE_BAD_PARAMETER);
458         }
459
460         if (acpi_gbl_init_handler) {
461                 return (AE_ALREADY_EXISTS);
462         }
463
464         acpi_gbl_init_handler = handler;
465         return AE_OK;
466 }
467
468 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
469 #endif                          /*  ACPI_FUTURE_USAGE  */
470 /*****************************************************************************
471  *
472  * FUNCTION:    acpi_purge_cached_objects
473  *
474  * PARAMETERS:  None
475  *
476  * RETURN:      Status
477  *
478  * DESCRIPTION: Empty all caches (delete the cached objects)
479  *
480  ****************************************************************************/
481 acpi_status acpi_purge_cached_objects(void)
482 {
483         ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
484
485         (void)acpi_os_purge_cache(acpi_gbl_state_cache);
486         (void)acpi_os_purge_cache(acpi_gbl_operand_cache);
487         (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
488         (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
489         return_ACPI_STATUS(AE_OK);
490 }
491
492 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)