err.no Git - linux-2.6/blob - drivers/acpi/utilities/utmisc.c

   1 /*******************************************************************************
   2  *
   3  * Module Name: utmisc - common utility procedures
   4  *
   5  ******************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <linux/module.h>
  45
  46 #include <acpi/acpi.h>
  47 #include <acpi/acnamesp.h>
  48
  49 #define _COMPONENT          ACPI_UTILITIES
  50 ACPI_MODULE_NAME("utmisc")
  51
  52 /*******************************************************************************
  53  *
  54  * FUNCTION:    acpi_ut_validate_exception
  55  *
  56  * PARAMETERS:  Status       - The acpi_status code to be formatted
  57  *
  58  * RETURN:      A string containing the exception text. NULL if exception is
  59  *              not valid.
  60  *
  61  * DESCRIPTION: This function validates and translates an ACPI exception into
  62  *              an ASCII string.
  63  *
  64  ******************************************************************************/
  65 const char *acpi_ut_validate_exception(acpi_status status)
  66 {
  67         acpi_status sub_status;
  68         const char *exception = NULL;
  69
  70         ACPI_FUNCTION_ENTRY();
  71
  72         /*
  73          * Status is composed of two parts, a "type" and an actual code
  74          */
  75         sub_status = (status & ~AE_CODE_MASK);
  76
  77         switch (status & AE_CODE_MASK) {
  78         case AE_CODE_ENVIRONMENTAL:
  79
  80                 if (sub_status <= AE_CODE_ENV_MAX) {
  81                         exception = acpi_gbl_exception_names_env[sub_status];
  82                 }
  83                 break;
  84
  85         case AE_CODE_PROGRAMMER:
  86
  87                 if (sub_status <= AE_CODE_PGM_MAX) {
  88                         exception =
  89                             acpi_gbl_exception_names_pgm[sub_status - 1];
  90                 }
  91                 break;
  92
  93         case AE_CODE_ACPI_TABLES:
  94
  95                 if (sub_status <= AE_CODE_TBL_MAX) {
  96                         exception =
  97                             acpi_gbl_exception_names_tbl[sub_status - 1];
  98                 }
  99                 break;
 100
 101         case AE_CODE_AML:
 102
 103                 if (sub_status <= AE_CODE_AML_MAX) {
 104                         exception =
 105                             acpi_gbl_exception_names_aml[sub_status - 1];
 106                 }
 107                 break;
 108
 109         case AE_CODE_CONTROL:
 110
 111                 if (sub_status <= AE_CODE_CTRL_MAX) {
 112                         exception =
 113                             acpi_gbl_exception_names_ctrl[sub_status - 1];
 114                 }
 115                 break;
 116
 117         default:
 118                 break;
 119         }
 120
 121         return (ACPI_CAST_PTR(const char, exception));
 122 }
 123
 124 /*******************************************************************************
 125  *
 126  * FUNCTION:    acpi_ut_is_aml_table
 127  *
 128  * PARAMETERS:  Table               - An ACPI table
 129  *
 130  * RETURN:      TRUE if table contains executable AML; FALSE otherwise
 131  *
 132  * DESCRIPTION: Check ACPI Signature for a table that contains AML code.
 133  *              Currently, these are DSDT,SSDT,PSDT. All other table types are
 134  *              data tables that do not contain AML code.
 135  *
 136  ******************************************************************************/
 137
 138 u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
 139 {
 140
 141         /* These are the only tables that contain executable AML */
 142
 143         if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) ||
 144             ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) ||
 145             ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
 146                 return (TRUE);
 147         }
 148
 149         return (FALSE);
 150 }
 151
 152 /*******************************************************************************
 153  *
 154  * FUNCTION:    acpi_ut_allocate_owner_id
 155  *
 156  * PARAMETERS:  owner_id        - Where the new owner ID is returned
 157  *
 158  * RETURN:      Status
 159  *
 160  * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
 161  *              track objects created by the table or method, to be deleted
 162  *              when the method exits or the table is unloaded.
 163  *
 164  ******************************************************************************/
 165
 166 acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
 167 {
 168         acpi_native_uint i;
 169         acpi_native_uint j;
 170         acpi_native_uint k;
 171         acpi_status status;
 172
 173         ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
 174
 175         /* Guard against multiple allocations of ID to the same location */
 176
 177         if (*owner_id) {
 178                 ACPI_ERROR((AE_INFO, "Owner ID [%2.2X] already exists",
 179                             *owner_id));
 180                 return_ACPI_STATUS(AE_ALREADY_EXISTS);
 181         }
 182
 183         /* Mutex for the global ID mask */
 184
 185         status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
 186         if (ACPI_FAILURE(status)) {
 187                 return_ACPI_STATUS(status);
 188         }
 189
 190         /*
 191          * Find a free owner ID, cycle through all possible IDs on repeated
 192          * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
 193          * to be scanned twice.
 194          */
 195         for (i = 0, j = acpi_gbl_last_owner_id_index;
 196              i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
 197                 if (j >= ACPI_NUM_OWNERID_MASKS) {
 198                         j = 0;  /* Wraparound to start of mask array */
 199                 }
 200
 201                 for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
 202                         if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
 203
 204                                 /* There are no free IDs in this mask */
 205
 206                                 break;
 207                         }
 208
 209                         if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
 210                                 /*
 211                                  * Found a free ID. The actual ID is the bit index plus one,
 212                                  * making zero an invalid Owner ID. Save this as the last ID
 213                                  * allocated and update the global ID mask.
 214                                  */
 215                                 acpi_gbl_owner_id_mask[j] |= (1 << k);
 216
 217                                 acpi_gbl_last_owner_id_index = (u8) j;
 218                                 acpi_gbl_next_owner_id_offset = (u8) (k + 1);
 219
 220                                 /*
 221                                  * Construct encoded ID from the index and bit position
 222                                  *
 223                                  * Note: Last [j].k (bit 255) is never used and is marked
 224                                  * permanently allocated (prevents +1 overflow)
 225                                  */
 226                                 *owner_id =
 227                                     (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
 228
 229                                 ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
 230                                                   "Allocated OwnerId: %2.2X\n",
 231                                                   (unsigned int)*owner_id));
 232                                 goto exit;
 233                         }
 234                 }
 235
 236                 acpi_gbl_next_owner_id_offset = 0;
 237         }
 238
 239         /*
 240          * All owner_ids have been allocated. This typically should
 241          * not happen since the IDs are reused after deallocation. The IDs are
 242          * allocated upon table load (one per table) and method execution, and
 243          * they are released when a table is unloaded or a method completes
 244          * execution.
 245          *
 246          * If this error happens, there may be very deep nesting of invoked control
 247          * methods, or there may be a bug where the IDs are not released.
 248          */
 249         status = AE_OWNER_ID_LIMIT;
 250         ACPI_ERROR((AE_INFO,
 251                     "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
 252
 253       exit:
 254         (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
 255         return_ACPI_STATUS(status);
 256 }
 257
 258 /*******************************************************************************
 259  *
 260  * FUNCTION:    acpi_ut_release_owner_id
 261  *
 262  * PARAMETERS:  owner_id_ptr        - Pointer to a previously allocated owner_iD
 263  *
 264  * RETURN:      None. No error is returned because we are either exiting a
 265  *              control method or unloading a table. Either way, we would
 266  *              ignore any error anyway.
 267  *
 268  * DESCRIPTION: Release a table or method owner ID.  Valid IDs are 1 - 255
 269  *
 270  ******************************************************************************/
 271
 272 void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
 273 {
 274         acpi_owner_id owner_id = *owner_id_ptr;
 275         acpi_status status;
 276         acpi_native_uint index;
 277         u32 bit;
 278
 279         ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
 280
 281         /* Always clear the input owner_id (zero is an invalid ID) */
 282
 283         *owner_id_ptr = 0;
 284
 285         /* Zero is not a valid owner_iD */
 286
 287         if (owner_id == 0) {
 288                 ACPI_ERROR((AE_INFO, "Invalid OwnerId: %2.2X", owner_id));
 289                 return_VOID;
 290         }
 291
 292         /* Mutex for the global ID mask */
 293
 294         status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
 295         if (ACPI_FAILURE(status)) {
 296                 return_VOID;
 297         }
 298
 299         /* Normalize the ID to zero */
 300
 301         owner_id--;
 302
 303         /* Decode ID to index/offset pair */
 304
 305         index = ACPI_DIV_32(owner_id);
 306         bit = 1 << ACPI_MOD_32(owner_id);
 307
 308         /* Free the owner ID only if it is valid */
 309
 310         if (acpi_gbl_owner_id_mask[index] & bit) {
 311                 acpi_gbl_owner_id_mask[index] ^= bit;
 312         } else {
 313                 ACPI_ERROR((AE_INFO,
 314                             "Release of non-allocated OwnerId: %2.2X",
 315                             owner_id + 1));
 316         }
 317
 318         (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
 319         return_VOID;
 320 }
 321
 322 /*******************************************************************************
 323  *
 324  * FUNCTION:    acpi_ut_strupr (strupr)
 325  *
 326  * PARAMETERS:  src_string      - The source string to convert
 327  *
 328  * RETURN:      None
 329  *
 330  * DESCRIPTION: Convert string to uppercase
 331  *
 332  * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
 333  *
 334  ******************************************************************************/
 335
 336 void acpi_ut_strupr(char *src_string)
 337 {
 338         char *string;
 339
 340         ACPI_FUNCTION_ENTRY();
 341
 342         if (!src_string) {
 343                 return;
 344         }
 345
 346         /* Walk entire string, uppercasing the letters */
 347
 348         for (string = src_string; *string; string++) {
 349                 *string = (char)ACPI_TOUPPER(*string);
 350         }
 351
 352         return;
 353 }
 354
 355 /*******************************************************************************
 356  *
 357  * FUNCTION:    acpi_ut_print_string
 358  *
 359  * PARAMETERS:  String          - Null terminated ASCII string
 360  *              max_length      - Maximum output length
 361  *
 362  * RETURN:      None
 363  *
 364  * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
 365  *              sequences.
 366  *
 367  ******************************************************************************/
 368
 369 void acpi_ut_print_string(char *string, u8 max_length)
 370 {
 371         u32 i;
 372
 373         if (!string) {
 374                 acpi_os_printf("<\"NULL STRING PTR\">");
 375                 return;
 376         }
 377
 378         acpi_os_printf("\"");
 379         for (i = 0; string[i] && (i < max_length); i++) {
 380
 381                 /* Escape sequences */
 382
 383                 switch (string[i]) {
 384                 case 0x07:
 385                         acpi_os_printf("\\a");  /* BELL */
 386                         break;
 387
 388                 case 0x08:
 389                         acpi_os_printf("\\b");  /* BACKSPACE */
 390                         break;
 391
 392                 case 0x0C:
 393                         acpi_os_printf("\\f");  /* FORMFEED */
 394                         break;
 395
 396                 case 0x0A:
 397                         acpi_os_printf("\\n");  /* LINEFEED */
 398                         break;
 399
 400                 case 0x0D:
 401                         acpi_os_printf("\\r");  /* CARRIAGE RETURN */
 402                         break;
 403
 404                 case 0x09:
 405                         acpi_os_printf("\\t");  /* HORIZONTAL TAB */
 406                         break;
 407
 408                 case 0x0B:
 409                         acpi_os_printf("\\v");  /* VERTICAL TAB */
 410                         break;
 411
 412                 case '\'':      /* Single Quote */
 413                 case '\"':      /* Double Quote */
 414                 case '\\':      /* Backslash */
 415                         acpi_os_printf("\\%c", (int)string[i]);
 416                         break;
 417
 418                 default:
 419
 420                         /* Check for printable character or hex escape */
 421
 422                         if (ACPI_IS_PRINT(string[i])) {
 423                                 /* This is a normal character */
 424
 425                                 acpi_os_printf("%c", (int)string[i]);
 426                         } else {
 427                                 /* All others will be Hex escapes */
 428
 429                                 acpi_os_printf("\\x%2.2X", (s32) string[i]);
 430                         }
 431                         break;
 432                 }
 433         }
 434         acpi_os_printf("\"");
 435
 436         if (i == max_length && string[i]) {
 437                 acpi_os_printf("...");
 438         }
 439 }
 440
 441 /*******************************************************************************
 442  *
 443  * FUNCTION:    acpi_ut_dword_byte_swap
 444  *
 445  * PARAMETERS:  Value           - Value to be converted
 446  *
 447  * RETURN:      u32 integer with bytes swapped
 448  *
 449  * DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes)
 450  *
 451  ******************************************************************************/
 452
 453 u32 acpi_ut_dword_byte_swap(u32 value)
 454 {
 455         union {
 456                 u32 value;
 457                 u8 bytes[4];
 458         } out;
 459         union {
 460                 u32 value;
 461                 u8 bytes[4];
 462         } in;
 463
 464         ACPI_FUNCTION_ENTRY();
 465
 466         in.value = value;
 467
 468         out.bytes[0] = in.bytes[3];
 469         out.bytes[1] = in.bytes[2];
 470         out.bytes[2] = in.bytes[1];
 471         out.bytes[3] = in.bytes[0];
 472
 473         return (out.value);
 474 }
 475
 476 /*******************************************************************************
 477  *
 478  * FUNCTION:    acpi_ut_set_integer_width
 479  *
 480  * PARAMETERS:  Revision            From DSDT header
 481  *
 482  * RETURN:      None
 483  *
 484  * DESCRIPTION: Set the global integer bit width based upon the revision
 485  *              of the DSDT.  For Revision 1 and 0, Integers are 32 bits.
 486  *              For Revision 2 and above, Integers are 64 bits.  Yes, this
 487  *              makes a difference.
 488  *
 489  ******************************************************************************/
 490
 491 void acpi_ut_set_integer_width(u8 revision)
 492 {
 493
 494         if (revision < 2) {
 495
 496                 /* 32-bit case */
 497
 498                 acpi_gbl_integer_bit_width = 32;
 499                 acpi_gbl_integer_nybble_width = 8;
 500                 acpi_gbl_integer_byte_width = 4;
 501         } else {
 502                 /* 64-bit case (ACPI 2.0+) */
 503
 504                 acpi_gbl_integer_bit_width = 64;
 505                 acpi_gbl_integer_nybble_width = 16;
 506                 acpi_gbl_integer_byte_width = 8;
 507         }
 508 }
 509
 510 #ifdef ACPI_DEBUG_OUTPUT
 511 /*******************************************************************************
 512  *
 513  * FUNCTION:    acpi_ut_display_init_pathname
 514  *
 515  * PARAMETERS:  Type                - Object type of the node
 516  *              obj_handle          - Handle whose pathname will be displayed
 517  *              Path                - Additional path string to be appended.
 518  *                                      (NULL if no extra path)
 519  *
 520  * RETURN:      acpi_status
 521  *
 522  * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
 523  *
 524  ******************************************************************************/
 525
 526 void
 527 acpi_ut_display_init_pathname(u8 type,
 528                               struct acpi_namespace_node *obj_handle,
 529                               char *path)
 530 {
 531         acpi_status status;
 532         struct acpi_buffer buffer;
 533
 534         ACPI_FUNCTION_ENTRY();
 535
 536         /* Only print the path if the appropriate debug level is enabled */
 537
 538         if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
 539                 return;
 540         }
 541
 542         /* Get the full pathname to the node */
 543
 544         buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
 545         status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
 546         if (ACPI_FAILURE(status)) {
 547                 return;
 548         }
 549
 550         /* Print what we're doing */
 551
 552         switch (type) {
 553         case ACPI_TYPE_METHOD:
 554                 acpi_os_printf("Executing  ");
 555                 break;
 556
 557         default:
 558                 acpi_os_printf("Initializing ");
 559                 break;
 560         }
 561
 562         /* Print the object type and pathname */
 563
 564         acpi_os_printf("%-12s %s",
 565                        acpi_ut_get_type_name(type), (char *)buffer.pointer);
 566
 567         /* Extra path is used to append names like _STA, _INI, etc. */
 568
 569         if (path) {
 570                 acpi_os_printf(".%s", path);
 571         }
 572         acpi_os_printf("\n");
 573
 574         ACPI_FREE(buffer.pointer);
 575 }
 576 #endif
 577
 578 /*******************************************************************************
 579  *
 580  * FUNCTION:    acpi_ut_valid_acpi_char
 581  *
 582  * PARAMETERS:  Char            - The character to be examined
 583  *              Position        - Byte position (0-3)
 584  *
 585  * RETURN:      TRUE if the character is valid, FALSE otherwise
 586  *
 587  * DESCRIPTION: Check for a valid ACPI character. Must be one of:
 588  *              1) Upper case alpha
 589  *              2) numeric
 590  *              3) underscore
 591  *
 592  *              We allow a '!' as the last character because of the ASF! table
 593  *
 594  ******************************************************************************/
 595
 596 u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position)
 597 {
 598
 599         if (!((character >= 'A' && character <= 'Z') ||
 600               (character >= '0' && character <= '9') || (character == '_'))) {
 601
 602                 /* Allow a '!' in the last position */
 603
 604                 if (character == '!' && position == 3) {
 605                         return (TRUE);
 606                 }
 607
 608                 return (FALSE);
 609         }
 610
 611         return (TRUE);
 612 }
 613
 614 /*******************************************************************************
 615  *
 616  * FUNCTION:    acpi_ut_valid_acpi_name
 617  *
 618  * PARAMETERS:  Name            - The name to be examined
 619  *
 620  * RETURN:      TRUE if the name is valid, FALSE otherwise
 621  *
 622  * DESCRIPTION: Check for a valid ACPI name.  Each character must be one of:
 623  *              1) Upper case alpha
 624  *              2) numeric
 625  *              3) underscore
 626  *
 627  ******************************************************************************/
 628
 629 u8 acpi_ut_valid_acpi_name(u32 name)
 630 {
 631         acpi_native_uint i;
 632
 633         ACPI_FUNCTION_ENTRY();
 634
 635         for (i = 0; i < ACPI_NAME_SIZE; i++) {
 636                 if (!acpi_ut_valid_acpi_char
 637                     ((ACPI_CAST_PTR(char, &name))[i], i)) {
 638                         return (FALSE);
 639                 }
 640         }
 641
 642         return (TRUE);
 643 }
 644
 645 /*******************************************************************************
 646  *
 647  * FUNCTION:    acpi_ut_repair_name
 648  *
 649  * PARAMETERS:  Name            - The ACPI name to be repaired
 650  *
 651  * RETURN:      Repaired version of the name
 652  *
 653  * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
 654  *              return the new name.
 655  *
 656  ******************************************************************************/
 657
 658 acpi_name acpi_ut_repair_name(char *name)
 659 {
 660         acpi_native_uint i;
 661         char new_name[ACPI_NAME_SIZE];
 662
 663         for (i = 0; i < ACPI_NAME_SIZE; i++) {
 664                 new_name[i] = name[i];
 665
 666                 /*
 667                  * Replace a bad character with something printable, yet technically
 668                  * still invalid. This prevents any collisions with existing "good"
 669                  * names in the namespace.
 670                  */
 671                 if (!acpi_ut_valid_acpi_char(name[i], i)) {
 672                         new_name[i] = '*';
 673                 }
 674         }
 675
 676         return (*(u32 *) new_name);
 677 }
 678
 679 /*******************************************************************************
 680  *
 681  * FUNCTION:    acpi_ut_strtoul64
 682  *
 683  * PARAMETERS:  String          - Null terminated string
 684  *              Base            - Radix of the string: 16 or ACPI_ANY_BASE;
 685  *                                ACPI_ANY_BASE means 'in behalf of to_integer'
 686  *              ret_integer     - Where the converted integer is returned
 687  *
 688  * RETURN:      Status and Converted value
 689  *
 690  * DESCRIPTION: Convert a string into an unsigned value. Performs either a
 691  *              32-bit or 64-bit conversion, depending on the current mode
 692  *              of the interpreter.
 693  *              NOTE: Does not support Octal strings, not needed.
 694  *
 695  ******************************************************************************/
 696
 697 acpi_status
 698 acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
 699 {
 700         u32 this_digit = 0;
 701         acpi_integer return_value = 0;
 702         acpi_integer quotient;
 703         acpi_integer dividend;
 704         u32 to_integer_op = (base == ACPI_ANY_BASE);
 705         u32 mode32 = (acpi_gbl_integer_byte_width == 4);
 706         u8 valid_digits = 0;
 707         u8 sign_of0x = 0;
 708         u8 term = 0;
 709
 710         ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
 711
 712         switch (base) {
 713         case ACPI_ANY_BASE:
 714         case 16:
 715                 break;
 716
 717         default:
 718                 /* Invalid Base */
 719                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 720         }
 721
 722         if (!string) {
 723                 goto error_exit;
 724         }
 725
 726         /* Skip over any white space in the buffer */
 727
 728         while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
 729                 string++;
 730         }
 731
 732         if (to_integer_op) {
 733                 /*
 734                  * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
 735                  * We need to determine if it is decimal or hexadecimal.
 736                  */
 737                 if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
 738                         sign_of0x = 1;
 739                         base = 16;
 740
 741                         /* Skip over the leading '0x' */
 742                         string += 2;
 743                 } else {
 744                         base = 10;
 745                 }
 746         }
 747
 748         /* Any string left? Check that '0x' is not followed by white space. */
 749
 750         if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
 751                 if (to_integer_op) {
 752                         goto error_exit;
 753                 } else {
 754                         goto all_done;
 755                 }
 756         }
 757
 758         /*
 759          * Perform a 32-bit or 64-bit conversion, depending upon the current
 760          * execution mode of the interpreter
 761          */
 762         dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
 763
 764         /* Main loop: convert the string to a 32- or 64-bit integer */
 765
 766         while (*string) {
 767                 if (ACPI_IS_DIGIT(*string)) {
 768
 769                         /* Convert ASCII 0-9 to Decimal value */
 770
 771                         this_digit = ((u8) * string) - '0';
 772                 } else if (base == 10) {
 773
 774                         /* Digit is out of range; possible in to_integer case only */
 775
 776                         term = 1;
 777                 } else {
 778                         this_digit = (u8) ACPI_TOUPPER(*string);
 779                         if (ACPI_IS_XDIGIT((char)this_digit)) {
 780
 781                                 /* Convert ASCII Hex char to value */
 782
 783                                 this_digit = this_digit - 'A' + 10;
 784                         } else {
 785                                 term = 1;
 786                         }
 787                 }
 788
 789                 if (term) {
 790                         if (to_integer_op) {
 791                                 goto error_exit;
 792                         } else {
 793                                 break;
 794                         }
 795                 } else if ((valid_digits == 0) && (this_digit == 0)
 796                            && !sign_of0x) {
 797
 798                         /* Skip zeros */
 799                         string++;
 800                         continue;
 801                 }
 802
 803                 valid_digits++;
 804
 805                 if (sign_of0x && ((valid_digits > 16)
 806                                   || ((valid_digits > 8) && mode32))) {
 807                         /*
 808                          * This is to_integer operation case.
 809                          * No any restrictions for string-to-integer conversion,
 810                          * see ACPI spec.
 811                          */
 812                         goto error_exit;
 813                 }
 814
 815                 /* Divide the digit into the correct position */
 816
 817                 (void)
 818                     acpi_ut_short_divide((dividend - (acpi_integer) this_digit),
 819                                          base, &quotient, NULL);
 820
 821                 if (return_value > quotient) {
 822                         if (to_integer_op) {
 823                                 goto error_exit;
 824                         } else {
 825                                 break;
 826                         }
 827                 }
 828
 829                 return_value *= base;
 830                 return_value += this_digit;
 831                 string++;
 832         }
 833
 834         /* All done, normal exit */
 835
 836       all_done:
 837
 838         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
 839                           ACPI_FORMAT_UINT64(return_value)));
 840
 841         *ret_integer = return_value;
 842         return_ACPI_STATUS(AE_OK);
 843
 844       error_exit:
 845         /* Base was set/validated above */
 846
 847         if (base == 10) {
 848                 return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
 849         } else {
 850                 return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
 851         }
 852 }
 853
 854 /*******************************************************************************
 855  *
 856  * FUNCTION:    acpi_ut_create_update_state_and_push
 857  *
 858  * PARAMETERS:  Object          - Object to be added to the new state
 859  *              Action          - Increment/Decrement
 860  *              state_list      - List the state will be added to
 861  *
 862  * RETURN:      Status
 863  *
 864  * DESCRIPTION: Create a new state and push it
 865  *
 866  ******************************************************************************/
 867
 868 acpi_status
 869 acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
 870                                      u16 action,
 871                                      union acpi_generic_state **state_list)
 872 {
 873         union acpi_generic_state *state;
 874
 875         ACPI_FUNCTION_ENTRY();
 876
 877         /* Ignore null objects; these are expected */
 878
 879         if (!object) {
 880                 return (AE_OK);
 881         }
 882
 883         state = acpi_ut_create_update_state(object, action);
 884         if (!state) {
 885                 return (AE_NO_MEMORY);
 886         }
 887
 888         acpi_ut_push_generic_state(state_list, state);
 889         return (AE_OK);
 890 }
 891
 892 /*******************************************************************************
 893  *
 894  * FUNCTION:    acpi_ut_walk_package_tree
 895  *
 896  * PARAMETERS:  source_object       - The package to walk
 897  *              target_object       - Target object (if package is being copied)
 898  *              walk_callback       - Called once for each package element
 899  *              Context             - Passed to the callback function
 900  *
 901  * RETURN:      Status
 902  *
 903  * DESCRIPTION: Walk through a package
 904  *
 905  ******************************************************************************/
 906
 907 acpi_status
 908 acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
 909                           void *target_object,
 910                           acpi_pkg_callback walk_callback, void *context)
 911 {
 912         acpi_status status = AE_OK;
 913         union acpi_generic_state *state_list = NULL;
 914         union acpi_generic_state *state;
 915         u32 this_index;
 916         union acpi_operand_object *this_source_obj;
 917
 918         ACPI_FUNCTION_TRACE(ut_walk_package_tree);
 919
 920         state = acpi_ut_create_pkg_state(source_object, target_object, 0);
 921         if (!state) {
 922                 return_ACPI_STATUS(AE_NO_MEMORY);
 923         }
 924
 925         while (state) {
 926
 927                 /* Get one element of the package */
 928
 929                 this_index = state->pkg.index;
 930                 this_source_obj = (union acpi_operand_object *)
 931                     state->pkg.source_object->package.elements[this_index];
 932
 933                 /*
 934                  * Check for:
 935                  * 1) An uninitialized package element.  It is completely
 936                  *    legal to declare a package and leave it uninitialized
 937                  * 2) Not an internal object - can be a namespace node instead
 938                  * 3) Any type other than a package.  Packages are handled in else
 939                  *    case below.
 940                  */
 941                 if ((!this_source_obj) ||
 942                     (ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) !=
 943                      ACPI_DESC_TYPE_OPERAND)
 944                     || (ACPI_GET_OBJECT_TYPE(this_source_obj) !=
 945                         ACPI_TYPE_PACKAGE)) {
 946                         status =
 947                             walk_callback(ACPI_COPY_TYPE_SIMPLE,
 948                                           this_source_obj, state, context);
 949                         if (ACPI_FAILURE(status)) {
 950                                 return_ACPI_STATUS(status);
 951                         }
 952
 953                         state->pkg.index++;
 954                         while (state->pkg.index >=
 955                                state->pkg.source_object->package.count) {
 956                                 /*
 957                                  * We've handled all of the objects at this level,  This means
 958                                  * that we have just completed a package.  That package may
 959                                  * have contained one or more packages itself.
 960                                  *
 961                                  * Delete this state and pop the previous state (package).
 962                                  */
 963                                 acpi_ut_delete_generic_state(state);
 964                                 state = acpi_ut_pop_generic_state(&state_list);
 965
 966                                 /* Finished when there are no more states */
 967
 968                                 if (!state) {
 969                                         /*
 970                                          * We have handled all of the objects in the top level
 971                                          * package just add the length of the package objects
 972                                          * and exit
 973                                          */
 974                                         return_ACPI_STATUS(AE_OK);
 975                                 }
 976
 977                                 /*
 978                                  * Go back up a level and move the index past the just
 979                                  * completed package object.
 980                                  */
 981                                 state->pkg.index++;
 982                         }
 983                 } else {
 984                         /* This is a subobject of type package */
 985
 986                         status =
 987                             walk_callback(ACPI_COPY_TYPE_PACKAGE,
 988                                           this_source_obj, state, context);
 989                         if (ACPI_FAILURE(status)) {
 990                                 return_ACPI_STATUS(status);
 991                         }
 992
 993                         /*
 994                          * Push the current state and create a new one
 995                          * The callback above returned a new target package object.
 996                          */
 997                         acpi_ut_push_generic_state(&state_list, state);
 998                         state = acpi_ut_create_pkg_state(this_source_obj,
 999                                                          state->pkg.
1000                                                          this_target_obj, 0);
1001                         if (!state) {
1002                                 return_ACPI_STATUS(AE_NO_MEMORY);
1003                         }
1004                 }
1005         }
1006
1007         /* We should never get here */
1008
1009         return_ACPI_STATUS(AE_AML_INTERNAL);
1010 }
1011
1012 /*******************************************************************************
1013  *
1014  * FUNCTION:    acpi_ut_error, acpi_ut_warning, acpi_ut_info
1015  *
1016  * PARAMETERS:  module_name         - Caller's module name (for error output)
1017  *              line_number         - Caller's line number (for error output)
1018  *              Format              - Printf format string + additional args
1019  *
1020  * RETURN:      None
1021  *
1022  * DESCRIPTION: Print message with module/line/version info
1023  *
1024  ******************************************************************************/
1025
1026 void ACPI_INTERNAL_VAR_XFACE
1027 acpi_ut_error(char *module_name, u32 line_number, char *format, ...)
1028 {
1029         va_list args;
1030
1031         acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
1032
1033         va_start(args, format);
1034         acpi_os_vprintf(format, args);
1035         acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
1036         va_end(args);
1037 }
1038
1039 void ACPI_INTERNAL_VAR_XFACE
1040 acpi_ut_exception(char *module_name,
1041                   u32 line_number, acpi_status status, char *format, ...)
1042 {
1043         va_list args;
1044
1045         acpi_os_printf("ACPI Exception (%s-%04d): %s, ", module_name,
1046                        line_number, acpi_format_exception(status));
1047
1048         va_start(args, format);
1049         acpi_os_vprintf(format, args);
1050         acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
1051         va_end(args);
1052 }
1053
1054 EXPORT_SYMBOL(acpi_ut_exception);
1055
1056 void ACPI_INTERNAL_VAR_XFACE
1057 acpi_ut_warning(char *module_name, u32 line_number, char *format, ...)
1058 {
1059         va_list args;
1060
1061         acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
1062
1063         va_start(args, format);
1064         acpi_os_vprintf(format, args);
1065         acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
1066         va_end(args);
1067 }
1068
1069 void ACPI_INTERNAL_VAR_XFACE
1070 acpi_ut_info(char *module_name, u32 line_number, char *format, ...)
1071 {
1072         va_list args;
1073
1074         /*
1075          * Removed module_name, line_number, and acpica version, not needed
1076          * for info output
1077          */
1078         acpi_os_printf("ACPI: ");
1079
1080         va_start(args, format);
1081         acpi_os_vprintf(format, args);
1082         acpi_os_printf("\n");
1083         va_end(args);
1084 }