err.no Git - linux-2.6/blob - drivers/acpi/utilities/uteval.c

   1 /******************************************************************************
   2  *
   3  * Module Name: uteval - Object evaluation
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2007, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acnamesp.h>
  46 #include <acpi/acinterp.h>
  47
  48 #define _COMPONENT          ACPI_UTILITIES
  49 ACPI_MODULE_NAME("uteval")
  50
  51 /* Local prototypes */
  52 static void
  53 acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length);
  54
  55 static acpi_status
  56 acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
  57                           struct acpi_compatible_id *one_cid);
  58
  59 /*
  60  * Strings supported by the _OSI predefined (internal) method.
  61  */
  62 static const char *acpi_interfaces_supported[] = {
  63         /* Operating System Vendor Strings */
  64
  65         "Linux",
  66         "Windows 2000",
  67         "Windows 2001",
  68         "Windows 2001 SP0",
  69         "Windows 2001 SP1",
  70         "Windows 2001 SP2",
  71         "Windows 2001 SP3",
  72         "Windows 2001 SP4",
  73         "Windows 2001.1",
  74         "Windows 2001.1 SP1",   /* Added 03/2006 */
  75         "Windows 2006",         /* Added 03/2006 */
  76
  77         /* Feature Group Strings */
  78
  79         "Extended Address Space Descriptor"
  80             /*
  81              * All "optional" feature group strings (features that are implemented
  82              * by the host) should be implemented in the host version of
  83              * acpi_os_validate_interface and should not be added here.
  84              */
  85 };
  86
  87 /*******************************************************************************
  88  *
  89  * FUNCTION:    acpi_ut_osi_implementation
  90  *
  91  * PARAMETERS:  walk_state          - Current walk state
  92  *
  93  * RETURN:      Status
  94  *
  95  * DESCRIPTION: Implementation of the _OSI predefined control method
  96  *
  97  ******************************************************************************/
  98
  99 acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
 100 {
 101         acpi_status status;
 102         union acpi_operand_object *string_desc;
 103         union acpi_operand_object *return_desc;
 104         acpi_native_uint i;
 105
 106         ACPI_FUNCTION_TRACE(ut_osi_implementation);
 107
 108         /* Validate the string input argument */
 109
 110         string_desc = walk_state->arguments[0].object;
 111         if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) {
 112                 return_ACPI_STATUS(AE_TYPE);
 113         }
 114
 115         /* Create a return object */
 116
 117         return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 118         if (!return_desc) {
 119                 return_ACPI_STATUS(AE_NO_MEMORY);
 120         }
 121
 122         /* Default return value is SUPPORTED */
 123
 124         return_desc->integer.value = ACPI_UINT32_MAX;
 125         walk_state->return_desc = return_desc;
 126
 127         /* Compare input string to static table of supported interfaces */
 128
 129         for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) {
 130                 if (!ACPI_STRCMP
 131                     (string_desc->string.pointer,
 132                      acpi_interfaces_supported[i])) {
 133
 134                         /* The interface is supported */
 135
 136                         return_ACPI_STATUS(AE_CTRL_TERMINATE);
 137                 }
 138         }
 139
 140         /*
 141          * Did not match the string in the static table, call the host OSL to
 142          * check for a match with one of the optional strings (such as
 143          * "Module Device", "3.0 Thermal Model", etc.)
 144          */
 145         status = acpi_os_validate_interface(string_desc->string.pointer);
 146         if (ACPI_SUCCESS(status)) {
 147
 148                 /* The interface is supported */
 149
 150                 return_ACPI_STATUS(AE_CTRL_TERMINATE);
 151         }
 152
 153         /* The interface is not supported */
 154
 155         return_desc->integer.value = 0;
 156         return_ACPI_STATUS(AE_CTRL_TERMINATE);
 157 }
 158
 159 /*******************************************************************************
 160  *
 161  * FUNCTION:    acpi_ut_evaluate_object
 162  *
 163  * PARAMETERS:  prefix_node         - Starting node
 164  *              Path                - Path to object from starting node
 165  *              expected_return_types - Bitmap of allowed return types
 166  *              return_desc         - Where a return value is stored
 167  *
 168  * RETURN:      Status
 169  *
 170  * DESCRIPTION: Evaluates a namespace object and verifies the type of the
 171  *              return object.  Common code that simplifies accessing objects
 172  *              that have required return objects of fixed types.
 173  *
 174  *              NOTE: Internal function, no parameter validation
 175  *
 176  ******************************************************************************/
 177
 178 acpi_status
 179 acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
 180                         char *path,
 181                         u32 expected_return_btypes,
 182                         union acpi_operand_object **return_desc)
 183 {
 184         struct acpi_evaluate_info *info;
 185         acpi_status status;
 186         u32 return_btype;
 187
 188         ACPI_FUNCTION_TRACE(ut_evaluate_object);
 189
 190         /* Allocate the evaluation information block */
 191
 192         info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 193         if (!info) {
 194                 return_ACPI_STATUS(AE_NO_MEMORY);
 195         }
 196
 197         info->prefix_node = prefix_node;
 198         info->pathname = path;
 199         info->parameter_type = ACPI_PARAM_ARGS;
 200
 201         /* Evaluate the object/method */
 202
 203         status = acpi_ns_evaluate(info);
 204         if (ACPI_FAILURE(status)) {
 205                 if (status == AE_NOT_FOUND) {
 206                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 207                                           "[%4.4s.%s] was not found\n",
 208                                           acpi_ut_get_node_name(prefix_node),
 209                                           path));
 210                 } else {
 211                         ACPI_ERROR_METHOD("Method execution failed",
 212                                           prefix_node, path, status);
 213                 }
 214
 215                 goto cleanup;
 216         }
 217
 218         /* Did we get a return object? */
 219
 220         if (!info->return_object) {
 221                 if (expected_return_btypes) {
 222                         ACPI_ERROR_METHOD("No object was returned from",
 223                                           prefix_node, path, AE_NOT_EXIST);
 224
 225                         status = AE_NOT_EXIST;
 226                 }
 227
 228                 goto cleanup;
 229         }
 230
 231         /* Map the return object type to the bitmapped type */
 232
 233         switch (ACPI_GET_OBJECT_TYPE(info->return_object)) {
 234         case ACPI_TYPE_INTEGER:
 235                 return_btype = ACPI_BTYPE_INTEGER;
 236                 break;
 237
 238         case ACPI_TYPE_BUFFER:
 239                 return_btype = ACPI_BTYPE_BUFFER;
 240                 break;
 241
 242         case ACPI_TYPE_STRING:
 243                 return_btype = ACPI_BTYPE_STRING;
 244                 break;
 245
 246         case ACPI_TYPE_PACKAGE:
 247                 return_btype = ACPI_BTYPE_PACKAGE;
 248                 break;
 249
 250         default:
 251                 return_btype = 0;
 252                 break;
 253         }
 254
 255         if ((acpi_gbl_enable_interpreter_slack) && (!expected_return_btypes)) {
 256                 /*
 257                  * We received a return object, but one was not expected.  This can
 258                  * happen frequently if the "implicit return" feature is enabled.
 259                  * Just delete the return object and return AE_OK.
 260                  */
 261                 acpi_ut_remove_reference(info->return_object);
 262                 goto cleanup;
 263         }
 264
 265         /* Is the return object one of the expected types? */
 266
 267         if (!(expected_return_btypes & return_btype)) {
 268                 ACPI_ERROR_METHOD("Return object type is incorrect",
 269                                   prefix_node, path, AE_TYPE);
 270
 271                 ACPI_ERROR((AE_INFO,
 272                             "Type returned from %s was incorrect: %s, expected Btypes: %X",
 273                             path,
 274                             acpi_ut_get_object_type_name(info->return_object),
 275                             expected_return_btypes));
 276
 277                 /* On error exit, we must delete the return object */
 278
 279                 acpi_ut_remove_reference(info->return_object);
 280                 status = AE_TYPE;
 281                 goto cleanup;
 282         }
 283
 284         /* Object type is OK, return it */
 285
 286         *return_desc = info->return_object;
 287
 288       cleanup:
 289         ACPI_FREE(info);
 290         return_ACPI_STATUS(status);
 291 }
 292
 293 /*******************************************************************************
 294  *
 295  * FUNCTION:    acpi_ut_evaluate_numeric_object
 296  *
 297  * PARAMETERS:  object_name         - Object name to be evaluated
 298  *              device_node         - Node for the device
 299  *              Address             - Where the value is returned
 300  *
 301  * RETURN:      Status
 302  *
 303  * DESCRIPTION: Evaluates a numeric namespace object for a selected device
 304  *              and stores result in *Address.
 305  *
 306  *              NOTE: Internal function, no parameter validation
 307  *
 308  ******************************************************************************/
 309
 310 acpi_status
 311 acpi_ut_evaluate_numeric_object(char *object_name,
 312                                 struct acpi_namespace_node *device_node,
 313                                 acpi_integer * address)
 314 {
 315         union acpi_operand_object *obj_desc;
 316         acpi_status status;
 317
 318         ACPI_FUNCTION_TRACE(ut_evaluate_numeric_object);
 319
 320         status = acpi_ut_evaluate_object(device_node, object_name,
 321                                          ACPI_BTYPE_INTEGER, &obj_desc);
 322         if (ACPI_FAILURE(status)) {
 323                 return_ACPI_STATUS(status);
 324         }
 325
 326         /* Get the returned Integer */
 327
 328         *address = obj_desc->integer.value;
 329
 330         /* On exit, we must delete the return object */
 331
 332         acpi_ut_remove_reference(obj_desc);
 333         return_ACPI_STATUS(status);
 334 }
 335
 336 /*******************************************************************************
 337  *
 338  * FUNCTION:    acpi_ut_copy_id_string
 339  *
 340  * PARAMETERS:  Destination         - Where to copy the string
 341  *              Source              - Source string
 342  *              max_length          - Length of the destination buffer
 343  *
 344  * RETURN:      None
 345  *
 346  * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
 347  *              Performs removal of a leading asterisk if present -- workaround
 348  *              for a known issue on a bunch of machines.
 349  *
 350  ******************************************************************************/
 351
 352 static void
 353 acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length)
 354 {
 355
 356         /*
 357          * Workaround for ID strings that have a leading asterisk. This construct
 358          * is not allowed by the ACPI specification  (ID strings must be
 359          * alphanumeric), but enough existing machines have this embedded in their
 360          * ID strings that the following code is useful.
 361          */
 362         if (*source == '*') {
 363                 source++;
 364         }
 365
 366         /* Do the actual copy */
 367
 368         ACPI_STRNCPY(destination, source, max_length);
 369 }
 370
 371 /*******************************************************************************
 372  *
 373  * FUNCTION:    acpi_ut_execute_HID
 374  *
 375  * PARAMETERS:  device_node         - Node for the device
 376  *              Hid                 - Where the HID is returned
 377  *
 378  * RETURN:      Status
 379  *
 380  * DESCRIPTION: Executes the _HID control method that returns the hardware
 381  *              ID of the device.
 382  *
 383  *              NOTE: Internal function, no parameter validation
 384  *
 385  ******************************************************************************/
 386
 387 acpi_status
 388 acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
 389                     struct acpi_device_id *hid)
 390 {
 391         union acpi_operand_object *obj_desc;
 392         acpi_status status;
 393
 394         ACPI_FUNCTION_TRACE(ut_execute_HID);
 395
 396         status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
 397                                          ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
 398                                          &obj_desc);
 399         if (ACPI_FAILURE(status)) {
 400                 return_ACPI_STATUS(status);
 401         }
 402
 403         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
 404
 405                 /* Convert the Numeric HID to string */
 406
 407                 acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
 408                                           hid->value);
 409         } else {
 410                 /* Copy the String HID from the returned object */
 411
 412                 acpi_ut_copy_id_string(hid->value, obj_desc->string.pointer,
 413                                        sizeof(hid->value));
 414         }
 415
 416         /* On exit, we must delete the return object */
 417
 418         acpi_ut_remove_reference(obj_desc);
 419         return_ACPI_STATUS(status);
 420 }
 421
 422 /*******************************************************************************
 423  *
 424  * FUNCTION:    acpi_ut_translate_one_cid
 425  *
 426  * PARAMETERS:  obj_desc            - _CID object, must be integer or string
 427  *              one_cid             - Where the CID string is returned
 428  *
 429  * RETURN:      Status
 430  *
 431  * DESCRIPTION: Return a numeric or string _CID value as a string.
 432  *              (Compatible ID)
 433  *
 434  *              NOTE:  Assumes a maximum _CID string length of
 435  *                     ACPI_MAX_CID_LENGTH.
 436  *
 437  ******************************************************************************/
 438
 439 static acpi_status
 440 acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
 441                           struct acpi_compatible_id *one_cid)
 442 {
 443
 444         switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
 445         case ACPI_TYPE_INTEGER:
 446
 447                 /* Convert the Numeric CID to string */
 448
 449                 acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
 450                                           one_cid->value);
 451                 return (AE_OK);
 452
 453         case ACPI_TYPE_STRING:
 454
 455                 if (obj_desc->string.length > ACPI_MAX_CID_LENGTH) {
 456                         return (AE_AML_STRING_LIMIT);
 457                 }
 458
 459                 /* Copy the String CID from the returned object */
 460
 461                 acpi_ut_copy_id_string(one_cid->value, obj_desc->string.pointer,
 462                                        ACPI_MAX_CID_LENGTH);
 463                 return (AE_OK);
 464
 465         default:
 466
 467                 return (AE_TYPE);
 468         }
 469 }
 470
 471 /*******************************************************************************
 472  *
 473  * FUNCTION:    acpi_ut_execute_CID
 474  *
 475  * PARAMETERS:  device_node         - Node for the device
 476  *              return_cid_list     - Where the CID list is returned
 477  *
 478  * RETURN:      Status
 479  *
 480  * DESCRIPTION: Executes the _CID control method that returns one or more
 481  *              compatible hardware IDs for the device.
 482  *
 483  *              NOTE: Internal function, no parameter validation
 484  *
 485  ******************************************************************************/
 486
 487 acpi_status
 488 acpi_ut_execute_CID(struct acpi_namespace_node * device_node,
 489                     struct acpi_compatible_id_list ** return_cid_list)
 490 {
 491         union acpi_operand_object *obj_desc;
 492         acpi_status status;
 493         u32 count;
 494         u32 size;
 495         struct acpi_compatible_id_list *cid_list;
 496         acpi_native_uint i;
 497
 498         ACPI_FUNCTION_TRACE(ut_execute_CID);
 499
 500         /* Evaluate the _CID method for this device */
 501
 502         status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
 503                                          ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
 504                                          | ACPI_BTYPE_PACKAGE, &obj_desc);
 505         if (ACPI_FAILURE(status)) {
 506                 return_ACPI_STATUS(status);
 507         }
 508
 509         /* Get the number of _CIDs returned */
 510
 511         count = 1;
 512         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
 513                 count = obj_desc->package.count;
 514         }
 515
 516         /* Allocate a worst-case buffer for the _CIDs */
 517
 518         size = (((count - 1) * sizeof(struct acpi_compatible_id)) +
 519                 sizeof(struct acpi_compatible_id_list));
 520
 521         cid_list = ACPI_ALLOCATE_ZEROED((acpi_size) size);
 522         if (!cid_list) {
 523                 return_ACPI_STATUS(AE_NO_MEMORY);
 524         }
 525
 526         /* Init CID list */
 527
 528         cid_list->count = count;
 529         cid_list->size = size;
 530
 531         /*
 532          *  A _CID can return either a single compatible ID or a package of
 533          *  compatible IDs.  Each compatible ID can be one of the following:
 534          *  1) Integer (32 bit compressed EISA ID) or
 535          *  2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
 536          */
 537
 538         /* The _CID object can be either a single CID or a package (list) of CIDs */
 539
 540         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
 541
 542                 /* Translate each package element */
 543
 544                 for (i = 0; i < count; i++) {
 545                         status =
 546                             acpi_ut_translate_one_cid(obj_desc->package.
 547                                                       elements[i],
 548                                                       &cid_list->id[i]);
 549                         if (ACPI_FAILURE(status)) {
 550                                 break;
 551                         }
 552                 }
 553         } else {
 554                 /* Only one CID, translate to a string */
 555
 556                 status = acpi_ut_translate_one_cid(obj_desc, cid_list->id);
 557         }
 558
 559         /* Cleanup on error */
 560
 561         if (ACPI_FAILURE(status)) {
 562                 ACPI_FREE(cid_list);
 563         } else {
 564                 *return_cid_list = cid_list;
 565         }
 566
 567         /* On exit, we must delete the _CID return object */
 568
 569         acpi_ut_remove_reference(obj_desc);
 570         return_ACPI_STATUS(status);
 571 }
 572
 573 /*******************************************************************************
 574  *
 575  * FUNCTION:    acpi_ut_execute_UID
 576  *
 577  * PARAMETERS:  device_node         - Node for the device
 578  *              Uid                 - Where the UID is returned
 579  *
 580  * RETURN:      Status
 581  *
 582  * DESCRIPTION: Executes the _UID control method that returns the hardware
 583  *              ID of the device.
 584  *
 585  *              NOTE: Internal function, no parameter validation
 586  *
 587  ******************************************************************************/
 588
 589 acpi_status
 590 acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
 591                     struct acpi_device_id *uid)
 592 {
 593         union acpi_operand_object *obj_desc;
 594         acpi_status status;
 595
 596         ACPI_FUNCTION_TRACE(ut_execute_UID);
 597
 598         status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
 599                                          ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
 600                                          &obj_desc);
 601         if (ACPI_FAILURE(status)) {
 602                 return_ACPI_STATUS(status);
 603         }
 604
 605         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
 606
 607                 /* Convert the Numeric UID to string */
 608
 609                 acpi_ex_unsigned_integer_to_string(obj_desc->integer.value,
 610                                                    uid->value);
 611         } else {
 612                 /* Copy the String UID from the returned object */
 613
 614                 acpi_ut_copy_id_string(uid->value, obj_desc->string.pointer,
 615                                        sizeof(uid->value));
 616         }
 617
 618         /* On exit, we must delete the return object */
 619
 620         acpi_ut_remove_reference(obj_desc);
 621         return_ACPI_STATUS(status);
 622 }
 623
 624 /*******************************************************************************
 625  *
 626  * FUNCTION:    acpi_ut_execute_STA
 627  *
 628  * PARAMETERS:  device_node         - Node for the device
 629  *              Flags               - Where the status flags are returned
 630  *
 631  * RETURN:      Status
 632  *
 633  * DESCRIPTION: Executes _STA for selected device and stores results in
 634  *              *Flags.
 635  *
 636  *              NOTE: Internal function, no parameter validation
 637  *
 638  ******************************************************************************/
 639
 640 acpi_status
 641 acpi_ut_execute_STA(struct acpi_namespace_node *device_node, u32 * flags)
 642 {
 643         union acpi_operand_object *obj_desc;
 644         acpi_status status;
 645
 646         ACPI_FUNCTION_TRACE(ut_execute_STA);
 647
 648         status = acpi_ut_evaluate_object(device_node, METHOD_NAME__STA,
 649                                          ACPI_BTYPE_INTEGER, &obj_desc);
 650         if (ACPI_FAILURE(status)) {
 651                 if (AE_NOT_FOUND == status) {
 652                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 653                                           "_STA on %4.4s was not found, assuming device is present\n",
 654                                           acpi_ut_get_node_name(device_node)));
 655
 656                         *flags = ACPI_UINT32_MAX;
 657                         status = AE_OK;
 658                 }
 659
 660                 return_ACPI_STATUS(status);
 661         }
 662
 663         /* Extract the status flags */
 664
 665         *flags = (u32) obj_desc->integer.value;
 666
 667         /* On exit, we must delete the return object */
 668
 669         acpi_ut_remove_reference(obj_desc);
 670         return_ACPI_STATUS(status);
 671 }
 672
 673 /*******************************************************************************
 674  *
 675  * FUNCTION:    acpi_ut_execute_Sxds
 676  *
 677  * PARAMETERS:  device_node         - Node for the device
 678  *              Flags               - Where the status flags are returned
 679  *
 680  * RETURN:      Status
 681  *
 682  * DESCRIPTION: Executes _STA for selected device and stores results in
 683  *              *Flags.
 684  *
 685  *              NOTE: Internal function, no parameter validation
 686  *
 687  ******************************************************************************/
 688
 689 acpi_status
 690 acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest)
 691 {
 692         union acpi_operand_object *obj_desc;
 693         acpi_status status;
 694         u32 i;
 695
 696         ACPI_FUNCTION_TRACE(ut_execute_sxds);
 697
 698         for (i = 0; i < 4; i++) {
 699                 highest[i] = 0xFF;
 700                 status = acpi_ut_evaluate_object(device_node,
 701                                                  ACPI_CAST_PTR(char,
 702                                                                acpi_gbl_highest_dstate_names
 703                                                                [i]),
 704                                                  ACPI_BTYPE_INTEGER, &obj_desc);
 705                 if (ACPI_FAILURE(status)) {
 706                         if (status != AE_NOT_FOUND) {
 707                                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 708                                                   "%s on Device %4.4s, %s\n",
 709                                                   ACPI_CAST_PTR(char,
 710                                                                 acpi_gbl_highest_dstate_names
 711                                                                 [i]),
 712                                                   acpi_ut_get_node_name
 713                                                   (device_node),
 714                                                   acpi_format_exception
 715                                                   (status)));
 716
 717                                 return_ACPI_STATUS(status);
 718                         }
 719                 } else {
 720                         /* Extract the Dstate value */
 721
 722                         highest[i] = (u8) obj_desc->integer.value;
 723
 724                         /* Delete the return object */
 725
 726                         acpi_ut_remove_reference(obj_desc);
 727                 }
 728         }
 729
 730         return_ACPI_STATUS(AE_OK);
 731 }