err.no Git - linux-2.6/blob - drivers/acpi/processor_idle.c

   1 /*
   2  * processor_idle - idle state submodule to the ACPI processor driver
   3  *
   4  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   5  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   6  *  Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
   7  *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
   8  *                      - Added processor hotplug support
   9  *  Copyright (C) 2005  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  10  *                      - Added support for C3 on SMP
  11  *
  12  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  13  *
  14  *  This program is free software; you can redistribute it and/or modify
  15  *  it under the terms of the GNU General Public License as published by
  16  *  the Free Software Foundation; either version 2 of the License, or (at
  17  *  your option) any later version.
  18  *
  19  *  This program is distributed in the hope that it will be useful, but
  20  *  WITHOUT ANY WARRANTY; without even the implied warranty of
  21  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  22  *  General Public License for more details.
  23  *
  24  *  You should have received a copy of the GNU General Public License along
  25  *  with this program; if not, write to the Free Software Foundation, Inc.,
  26  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  27  *
  28  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  29  */
  30
  31 #include <linux/kernel.h>
  32 #include <linux/module.h>
  33 #include <linux/init.h>
  34 #include <linux/cpufreq.h>
  35 #include <linux/proc_fs.h>
  36 #include <linux/seq_file.h>
  37 #include <linux/acpi.h>
  38 #include <linux/dmi.h>
  39 #include <linux/moduleparam.h>
  40 #include <linux/sched.h>        /* need_resched() */
  41 #include <linux/pm_qos_params.h>
  42 #include <linux/clockchips.h>
  43 #include <linux/cpuidle.h>
  44
  45 /*
  46  * Include the apic definitions for x86 to have the APIC timer related defines
  47  * available also for UP (on SMP it gets magically included via linux/smp.h).
  48  * asm/acpi.h is not an option, as it would require more include magic. Also
  49  * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
  50  */
  51 #ifdef CONFIG_X86
  52 #include <asm/apic.h>
  53 #endif
  54
  55 #include <asm/io.h>
  56 #include <asm/uaccess.h>
  57
  58 #include <acpi/acpi_bus.h>
  59 #include <acpi/processor.h>
  60
  61 #define ACPI_PROCESSOR_COMPONENT        0x01000000
  62 #define ACPI_PROCESSOR_CLASS            "processor"
  63 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
  64 ACPI_MODULE_NAME("processor_idle");
  65 #define ACPI_PROCESSOR_FILE_POWER       "power"
  66 #define US_TO_PM_TIMER_TICKS(t)         ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
  67 #define PM_TIMER_TICK_NS                (1000000000ULL/PM_TIMER_FREQUENCY)
  68 #ifndef CONFIG_CPU_IDLE
  69 #define C2_OVERHEAD                     4       /* 1us (3.579 ticks per us) */
  70 #define C3_OVERHEAD                     4       /* 1us (3.579 ticks per us) */
  71 static void (*pm_idle_save) (void) __read_mostly;
  72 #else
  73 #define C2_OVERHEAD                     1       /* 1us */
  74 #define C3_OVERHEAD                     1       /* 1us */
  75 #endif
  76 #define PM_TIMER_TICKS_TO_US(p)         (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
  77
  78 static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
  79 #ifdef CONFIG_CPU_IDLE
  80 module_param(max_cstate, uint, 0000);
  81 #else
  82 module_param(max_cstate, uint, 0644);
  83 #endif
  84 static unsigned int nocst __read_mostly;
  85 module_param(nocst, uint, 0000);
  86
  87 #ifndef CONFIG_CPU_IDLE
  88 /*
  89  * bm_history -- bit-mask with a bit per jiffy of bus-master activity
  90  * 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
  91  * 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms
  92  * 100 HZ: 0x0000000F: 4 jiffies = 40ms
  93  * reduce history for more aggressive entry into C3
  94  */
  95 static unsigned int bm_history __read_mostly =
  96     (HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
  97 module_param(bm_history, uint, 0644);
  98
  99 static int acpi_processor_set_power_policy(struct acpi_processor *pr);
 100
 101 #else   /* CONFIG_CPU_IDLE */
 102 static unsigned int latency_factor __read_mostly = 2;
 103 module_param(latency_factor, uint, 0644);
 104 #endif
 105
 106 /*
 107  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
 108  * For now disable this. Probably a bug somewhere else.
 109  *
 110  * To skip this limit, boot/load with a large max_cstate limit.
 111  */
 112 static int set_max_cstate(const struct dmi_system_id *id)
 113 {
 114         if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
 115                 return 0;
 116
 117         printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate."
 118                " Override with \"processor.max_cstate=%d\"\n", id->ident,
 119                (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
 120
 121         max_cstate = (long)id->driver_data;
 122
 123         return 0;
 124 }
 125
 126 /* Actually this shouldn't be __cpuinitdata, would be better to fix the
 127    callers to only run once -AK */
 128 static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
 129         { set_max_cstate, "IBM ThinkPad R40e", {
 130           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 131           DMI_MATCH(DMI_BIOS_VERSION,"1SET70WW")}, (void *)1},
 132         { set_max_cstate, "IBM ThinkPad R40e", {
 133           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 134           DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW")}, (void *)1},
 135         { set_max_cstate, "IBM ThinkPad R40e", {
 136           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 137           DMI_MATCH(DMI_BIOS_VERSION,"1SET43WW") }, (void*)1},
 138         { set_max_cstate, "IBM ThinkPad R40e", {
 139           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 140           DMI_MATCH(DMI_BIOS_VERSION,"1SET45WW") }, (void*)1},
 141         { set_max_cstate, "IBM ThinkPad R40e", {
 142           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 143           DMI_MATCH(DMI_BIOS_VERSION,"1SET47WW") }, (void*)1},
 144         { set_max_cstate, "IBM ThinkPad R40e", {
 145           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 146           DMI_MATCH(DMI_BIOS_VERSION,"1SET50WW") }, (void*)1},
 147         { set_max_cstate, "IBM ThinkPad R40e", {
 148           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 149           DMI_MATCH(DMI_BIOS_VERSION,"1SET52WW") }, (void*)1},
 150         { set_max_cstate, "IBM ThinkPad R40e", {
 151           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 152           DMI_MATCH(DMI_BIOS_VERSION,"1SET55WW") }, (void*)1},
 153         { set_max_cstate, "IBM ThinkPad R40e", {
 154           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 155           DMI_MATCH(DMI_BIOS_VERSION,"1SET56WW") }, (void*)1},
 156         { set_max_cstate, "IBM ThinkPad R40e", {
 157           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 158           DMI_MATCH(DMI_BIOS_VERSION,"1SET59WW") }, (void*)1},
 159         { set_max_cstate, "IBM ThinkPad R40e", {
 160           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 161           DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }, (void*)1},
 162         { set_max_cstate, "IBM ThinkPad R40e", {
 163           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 164           DMI_MATCH(DMI_BIOS_VERSION,"1SET61WW") }, (void*)1},
 165         { set_max_cstate, "IBM ThinkPad R40e", {
 166           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 167           DMI_MATCH(DMI_BIOS_VERSION,"1SET62WW") }, (void*)1},
 168         { set_max_cstate, "IBM ThinkPad R40e", {
 169           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 170           DMI_MATCH(DMI_BIOS_VERSION,"1SET64WW") }, (void*)1},
 171         { set_max_cstate, "IBM ThinkPad R40e", {
 172           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 173           DMI_MATCH(DMI_BIOS_VERSION,"1SET65WW") }, (void*)1},
 174         { set_max_cstate, "IBM ThinkPad R40e", {
 175           DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 176           DMI_MATCH(DMI_BIOS_VERSION,"1SET68WW") }, (void*)1},
 177         { set_max_cstate, "Medion 41700", {
 178           DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
 179           DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J")}, (void *)1},
 180         { set_max_cstate, "Clevo 5600D", {
 181           DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
 182           DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
 183          (void *)2},
 184         {},
 185 };
 186
 187 static inline u32 ticks_elapsed(u32 t1, u32 t2)
 188 {
 189         if (t2 >= t1)
 190                 return (t2 - t1);
 191         else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
 192                 return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
 193         else
 194                 return ((0xFFFFFFFF - t1) + t2);
 195 }
 196
 197 static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2)
 198 {
 199         if (t2 >= t1)
 200                 return PM_TIMER_TICKS_TO_US(t2 - t1);
 201         else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
 202                 return PM_TIMER_TICKS_TO_US(((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
 203         else
 204                 return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
 205 }
 206
 207 /*
 208  * Callers should disable interrupts before the call and enable
 209  * interrupts after return.
 210  */
 211 static void acpi_safe_halt(void)
 212 {
 213         current_thread_info()->status &= ~TS_POLLING;
 214         /*
 215          * TS_POLLING-cleared state must be visible before we
 216          * test NEED_RESCHED:
 217          */
 218         smp_mb();
 219         if (!need_resched()) {
 220                 safe_halt();
 221                 local_irq_disable();
 222         }
 223         current_thread_info()->status |= TS_POLLING;
 224 }
 225
 226 #ifndef CONFIG_CPU_IDLE
 227
 228 static void
 229 acpi_processor_power_activate(struct acpi_processor *pr,
 230                               struct acpi_processor_cx *new)
 231 {
 232         struct acpi_processor_cx *old;
 233
 234         if (!pr || !new)
 235                 return;
 236
 237         old = pr->power.state;
 238
 239         if (old)
 240                 old->promotion.count = 0;
 241         new->demotion.count = 0;
 242
 243         /* Cleanup from old state. */
 244         if (old) {
 245                 switch (old->type) {
 246                 case ACPI_STATE_C3:
 247                         /* Disable bus master reload */
 248                         if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
 249                                 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
 250                         break;
 251                 }
 252         }
 253
 254         /* Prepare to use new state. */
 255         switch (new->type) {
 256         case ACPI_STATE_C3:
 257                 /* Enable bus master reload */
 258                 if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
 259                         acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
 260                 break;
 261         }
 262
 263         pr->power.state = new;
 264
 265         return;
 266 }
 267
 268 static atomic_t c3_cpu_count;
 269
 270 /* Common C-state entry for C2, C3, .. */
 271 static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 272 {
 273         if (cstate->entry_method == ACPI_CSTATE_FFH) {
 274                 /* Call into architectural FFH based C-state */
 275                 acpi_processor_ffh_cstate_enter(cstate);
 276         } else {
 277                 int unused;
 278                 /* IO port based C-state */
 279                 inb(cstate->address);
 280                 /* Dummy wait op - must do something useless after P_LVL2 read
 281                    because chipsets cannot guarantee that STPCLK# signal
 282                    gets asserted in time to freeze execution properly. */
 283                 unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
 284         }
 285 }
 286 #endif /* !CONFIG_CPU_IDLE */
 287
 288 #ifdef ARCH_APICTIMER_STOPS_ON_C3
 289
 290 /*
 291  * Some BIOS implementations switch to C3 in the published C2 state.
 292  * This seems to be a common problem on AMD boxen, but other vendors
 293  * are affected too. We pick the most conservative approach: we assume
 294  * that the local APIC stops in both C2 and C3.
 295  */
 296 static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 297                                    struct acpi_processor_cx *cx)
 298 {
 299         struct acpi_processor_power *pwr = &pr->power;
 300         u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
 301
 302         /*
 303          * Check, if one of the previous states already marked the lapic
 304          * unstable
 305          */
 306         if (pwr->timer_broadcast_on_state < state)
 307                 return;
 308
 309         if (cx->type >= type)
 310                 pr->power.timer_broadcast_on_state = state;
 311 }
 312
 313 static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
 314 {
 315         unsigned long reason;
 316
 317         reason = pr->power.timer_broadcast_on_state < INT_MAX ?
 318                 CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF;
 319
 320         clockevents_notify(reason, &pr->id);
 321 }
 322
 323 /* Power(C) State timer broadcast control */
 324 static void acpi_state_timer_broadcast(struct acpi_processor *pr,
 325                                        struct acpi_processor_cx *cx,
 326                                        int broadcast)
 327 {
 328         int state = cx - pr->power.states;
 329
 330         if (state >= pr->power.timer_broadcast_on_state) {
 331                 unsigned long reason;
 332
 333                 reason = broadcast ?  CLOCK_EVT_NOTIFY_BROADCAST_ENTER :
 334                         CLOCK_EVT_NOTIFY_BROADCAST_EXIT;
 335                 clockevents_notify(reason, &pr->id);
 336         }
 337 }
 338
 339 #else
 340
 341 static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 342                                    struct acpi_processor_cx *cstate) { }
 343 static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
 344 static void acpi_state_timer_broadcast(struct acpi_processor *pr,
 345                                        struct acpi_processor_cx *cx,
 346                                        int broadcast)
 347 {
 348 }
 349
 350 #endif
 351
 352 /*
 353  * Suspend / resume control
 354  */
 355 static int acpi_idle_suspend;
 356
 357 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 358 {
 359         acpi_idle_suspend = 1;
 360         return 0;
 361 }
 362
 363 int acpi_processor_resume(struct acpi_device * device)
 364 {
 365         acpi_idle_suspend = 0;
 366         return 0;
 367 }
 368
 369 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
 370 static int tsc_halts_in_c(int state)
 371 {
 372         switch (boot_cpu_data.x86_vendor) {
 373         case X86_VENDOR_AMD:
 374                 /*
 375                  * AMD Fam10h TSC will tick in all
 376                  * C/P/S0/S1 states when this bit is set.
 377                  */
 378                 if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
 379                         return 0;
 380                 /*FALL THROUGH*/
 381         case X86_VENDOR_INTEL:
 382                 /* Several cases known where TSC halts in C2 too */
 383         default:
 384                 return state > ACPI_STATE_C1;
 385         }
 386 }
 387 #endif
 388
 389 #ifndef CONFIG_CPU_IDLE
 390 static void acpi_processor_idle(void)
 391 {
 392         struct acpi_processor *pr = NULL;
 393         struct acpi_processor_cx *cx = NULL;
 394         struct acpi_processor_cx *next_state = NULL;
 395         int sleep_ticks = 0;
 396         u32 t1, t2 = 0;
 397
 398         /*
 399          * Interrupts must be disabled during bus mastering calculations and
 400          * for C2/C3 transitions.
 401          */
 402         local_irq_disable();
 403
 404         pr = processors[smp_processor_id()];
 405         if (!pr) {
 406                 local_irq_enable();
 407                 return;
 408         }
 409
 410         /*
 411          * Check whether we truly need to go idle, or should
 412          * reschedule:
 413          */
 414         if (unlikely(need_resched())) {
 415                 local_irq_enable();
 416                 return;
 417         }
 418
 419         cx = pr->power.state;
 420         if (!cx || acpi_idle_suspend) {
 421                 if (pm_idle_save) {
 422                         pm_idle_save(); /* enables IRQs */
 423                 } else {
 424                         acpi_safe_halt();
 425                         local_irq_enable();
 426                 }
 427
 428                 return;
 429         }
 430
 431         /*
 432          * Check BM Activity
 433          * -----------------
 434          * Check for bus mastering activity (if required), record, and check
 435          * for demotion.
 436          */
 437         if (pr->flags.bm_check) {
 438                 u32 bm_status = 0;
 439                 unsigned long diff = jiffies - pr->power.bm_check_timestamp;
 440
 441                 if (diff > 31)
 442                         diff = 31;
 443
 444                 pr->power.bm_activity <<= diff;
 445
 446                 acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
 447                 if (bm_status) {
 448                         pr->power.bm_activity |= 0x1;
 449                         acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
 450                 }
 451                 /*
 452                  * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
 453                  * the true state of bus mastering activity; forcing us to
 454                  * manually check the BMIDEA bit of each IDE channel.
 455                  */
 456                 else if (errata.piix4.bmisx) {
 457                         if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
 458                             || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
 459                                 pr->power.bm_activity |= 0x1;
 460                 }
 461
 462                 pr->power.bm_check_timestamp = jiffies;
 463
 464                 /*
 465                  * If bus mastering is or was active this jiffy, demote
 466                  * to avoid a faulty transition.  Note that the processor
 467                  * won't enter a low-power state during this call (to this
 468                  * function) but should upon the next.
 469                  *
 470                  * TBD: A better policy might be to fallback to the demotion
 471                  *      state (use it for this quantum only) istead of
 472                  *      demoting -- and rely on duration as our sole demotion
 473                  *      qualification.  This may, however, introduce DMA
 474                  *      issues (e.g. floppy DMA transfer overrun/underrun).
 475                  */
 476                 if ((pr->power.bm_activity & 0x1) &&
 477                     cx->demotion.threshold.bm) {
 478                         local_irq_enable();
 479                         next_state = cx->demotion.state;
 480                         goto end;
 481                 }
 482         }
 483
 484 #ifdef CONFIG_HOTPLUG_CPU
 485         /*
 486          * Check for P_LVL2_UP flag before entering C2 and above on
 487          * an SMP system. We do it here instead of doing it at _CST/P_LVL
 488          * detection phase, to work cleanly with logical CPU hotplug.
 489          */
 490         if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
 491             !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 492                 cx = &pr->power.states[ACPI_STATE_C1];
 493 #endif
 494
 495         /*
 496          * Sleep:
 497          * ------
 498          * Invoke the current Cx state to put the processor to sleep.
 499          */
 500         if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
 501                 current_thread_info()->status &= ~TS_POLLING;
 502                 /*
 503                  * TS_POLLING-cleared state must be visible before we
 504                  * test NEED_RESCHED:
 505                  */
 506                 smp_mb();
 507                 if (need_resched()) {
 508                         current_thread_info()->status |= TS_POLLING;
 509                         local_irq_enable();
 510                         return;
 511                 }
 512         }
 513
 514         switch (cx->type) {
 515
 516         case ACPI_STATE_C1:
 517                 /*
 518                  * Invoke C1.
 519                  * Use the appropriate idle routine, the one that would
 520                  * be used without acpi C-states.
 521                  */
 522                 if (pm_idle_save) {
 523                         pm_idle_save(); /* enables IRQs */
 524                 } else {
 525                         acpi_safe_halt();
 526                         local_irq_enable();
 527                 }
 528
 529                 /*
 530                  * TBD: Can't get time duration while in C1, as resumes
 531                  *      go to an ISR rather than here.  Need to instrument
 532                  *      base interrupt handler.
 533                  *
 534                  * Note: the TSC better not stop in C1, sched_clock() will
 535                  *       skew otherwise.
 536                  */
 537                 sleep_ticks = 0xFFFFFFFF;
 538
 539                 break;
 540
 541         case ACPI_STATE_C2:
 542                 /* Get start time (ticks) */
 543                 t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 544                 /* Tell the scheduler that we are going deep-idle: */
 545                 sched_clock_idle_sleep_event();
 546                 /* Invoke C2 */
 547                 acpi_state_timer_broadcast(pr, cx, 1);
 548                 acpi_cstate_enter(cx);
 549                 /* Get end time (ticks) */
 550                 t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 551
 552 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
 553                 /* TSC halts in C2, so notify users */
 554                 if (tsc_halts_in_c(ACPI_STATE_C2))
 555                         mark_tsc_unstable("possible TSC halt in C2");
 556 #endif
 557                 /* Compute time (ticks) that we were actually asleep */
 558                 sleep_ticks = ticks_elapsed(t1, t2);
 559
 560                 /* Tell the scheduler how much we idled: */
 561                 sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 562
 563                 /* Re-enable interrupts */
 564                 local_irq_enable();
 565                 /* Do not account our idle-switching overhead: */
 566                 sleep_ticks -= cx->latency_ticks + C2_OVERHEAD;
 567
 568                 current_thread_info()->status |= TS_POLLING;
 569                 acpi_state_timer_broadcast(pr, cx, 0);
 570                 break;
 571
 572         case ACPI_STATE_C3:
 573                 acpi_unlazy_tlb(smp_processor_id());
 574                 /*
 575                  * Must be done before busmaster disable as we might
 576                  * need to access HPET !
 577                  */
 578                 acpi_state_timer_broadcast(pr, cx, 1);
 579                 /*
 580                  * disable bus master
 581                  * bm_check implies we need ARB_DIS
 582                  * !bm_check implies we need cache flush
 583                  * bm_control implies whether we can do ARB_DIS
 584                  *
 585                  * That leaves a case where bm_check is set and bm_control is
 586                  * not set. In that case we cannot do much, we enter C3
 587                  * without doing anything.
 588                  */
 589                 if (pr->flags.bm_check && pr->flags.bm_control) {
 590                         if (atomic_inc_return(&c3_cpu_count) ==
 591                             num_online_cpus()) {
 592                                 /*
 593                                  * All CPUs are trying to go to C3
 594                                  * Disable bus master arbitration
 595                                  */
 596                                 acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
 597                         }
 598                 } else if (!pr->flags.bm_check) {
 599                         /* SMP with no shared cache... Invalidate cache  */
 600                         ACPI_FLUSH_CPU_CACHE();
 601                 }
 602
 603                 /* Get start time (ticks) */
 604                 t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 605                 /* Invoke C3 */
 606                 /* Tell the scheduler that we are going deep-idle: */
 607                 sched_clock_idle_sleep_event();
 608                 acpi_cstate_enter(cx);
 609                 /* Get end time (ticks) */
 610                 t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 611                 if (pr->flags.bm_check && pr->flags.bm_control) {
 612                         /* Enable bus master arbitration */
 613                         atomic_dec(&c3_cpu_count);
 614                         acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
 615                 }
 616
 617 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
 618                 /* TSC halts in C3, so notify users */
 619                 if (tsc_halts_in_c(ACPI_STATE_C3))
 620                         mark_tsc_unstable("TSC halts in C3");
 621 #endif
 622                 /* Compute time (ticks) that we were actually asleep */
 623                 sleep_ticks = ticks_elapsed(t1, t2);
 624                 /* Tell the scheduler how much we idled: */
 625                 sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 626
 627                 /* Re-enable interrupts */
 628                 local_irq_enable();
 629                 /* Do not account our idle-switching overhead: */
 630                 sleep_ticks -= cx->latency_ticks + C3_OVERHEAD;
 631
 632                 current_thread_info()->status |= TS_POLLING;
 633                 acpi_state_timer_broadcast(pr, cx, 0);
 634                 break;
 635
 636         default:
 637                 local_irq_enable();
 638                 return;
 639         }
 640         cx->usage++;
 641         if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0))
 642                 cx->time += sleep_ticks;
 643
 644         next_state = pr->power.state;
 645
 646 #ifdef CONFIG_HOTPLUG_CPU
 647         /* Don't do promotion/demotion */
 648         if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
 649             !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) {
 650                 next_state = cx;
 651                 goto end;
 652         }
 653 #endif
 654
 655         /*
 656          * Promotion?
 657          * ----------
 658          * Track the number of longs (time asleep is greater than threshold)
 659          * and promote when the count threshold is reached.  Note that bus
 660          * mastering activity may prevent promotions.
 661          * Do not promote above max_cstate.
 662          */
 663         if (cx->promotion.state &&
 664             ((cx->promotion.state - pr->power.states) <= max_cstate)) {
 665                 if (sleep_ticks > cx->promotion.threshold.ticks &&
 666                   cx->promotion.state->latency <=
 667                                 pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
 668                         cx->promotion.count++;
 669                         cx->demotion.count = 0;
 670                         if (cx->promotion.count >=
 671                             cx->promotion.threshold.count) {
 672                                 if (pr->flags.bm_check) {
 673                                         if (!
 674                                             (pr->power.bm_activity & cx->
 675                                              promotion.threshold.bm)) {
 676                                                 next_state =
 677                                                     cx->promotion.state;
 678                                                 goto end;
 679                                         }
 680                                 } else {
 681                                         next_state = cx->promotion.state;
 682                                         goto end;
 683                                 }
 684                         }
 685                 }
 686         }
 687
 688         /*
 689          * Demotion?
 690          * ---------
 691          * Track the number of shorts (time asleep is less than time threshold)
 692          * and demote when the usage threshold is reached.
 693          */
 694         if (cx->demotion.state) {
 695                 if (sleep_ticks < cx->demotion.threshold.ticks) {
 696                         cx->demotion.count++;
 697                         cx->promotion.count = 0;
 698                         if (cx->demotion.count >= cx->demotion.threshold.count) {
 699                                 next_state = cx->demotion.state;
 700                                 goto end;
 701                         }
 702                 }
 703         }
 704
 705       end:
 706         /*
 707          * Demote if current state exceeds max_cstate
 708          * or if the latency of the current state is unacceptable
 709          */
 710         if ((pr->power.state - pr->power.states) > max_cstate ||
 711                 pr->power.state->latency >
 712                                 pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
 713                 if (cx->demotion.state)
 714                         next_state = cx->demotion.state;
 715         }
 716
 717         /*
 718          * New Cx State?
 719          * -------------
 720          * If we're going to start using a new Cx state we must clean up
 721          * from the previous and prepare to use the new.
 722          */
 723         if (next_state != pr->power.state)
 724                 acpi_processor_power_activate(pr, next_state);
 725 }
 726
 727 static int acpi_processor_set_power_policy(struct acpi_processor *pr)
 728 {
 729         unsigned int i;
 730         unsigned int state_is_set = 0;
 731         struct acpi_processor_cx *lower = NULL;
 732         struct acpi_processor_cx *higher = NULL;
 733         struct acpi_processor_cx *cx;
 734
 735
 736         if (!pr)
 737                 return -EINVAL;
 738
 739         /*
 740          * This function sets the default Cx state policy (OS idle handler).
 741          * Our scheme is to promote quickly to C2 but more conservatively
 742          * to C3.  We're favoring C2  for its characteristics of low latency
 743          * (quick response), good power savings, and ability to allow bus
 744          * mastering activity.  Note that the Cx state policy is completely
 745          * customizable and can be altered dynamically.
 746          */
 747
 748         /* startup state */
 749         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 750                 cx = &pr->power.states[i];
 751                 if (!cx->valid)
 752                         continue;
 753
 754                 if (!state_is_set)
 755                         pr->power.state = cx;
 756                 state_is_set++;
 757                 break;
 758         }
 759
 760         if (!state_is_set)
 761                 return -ENODEV;
 762
 763         /* demotion */
 764         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 765                 cx = &pr->power.states[i];
 766                 if (!cx->valid)
 767                         continue;
 768
 769                 if (lower) {
 770                         cx->demotion.state = lower;
 771                         cx->demotion.threshold.ticks = cx->latency_ticks;
 772                         cx->demotion.threshold.count = 1;
 773                         if (cx->type == ACPI_STATE_C3)
 774                                 cx->demotion.threshold.bm = bm_history;
 775                 }
 776
 777                 lower = cx;
 778         }
 779
 780         /* promotion */
 781         for (i = (ACPI_PROCESSOR_MAX_POWER - 1); i > 0; i--) {
 782                 cx = &pr->power.states[i];
 783                 if (!cx->valid)
 784                         continue;
 785
 786                 if (higher) {
 787                         cx->promotion.state = higher;
 788                         cx->promotion.threshold.ticks = cx->latency_ticks;
 789                         if (cx->type >= ACPI_STATE_C2)
 790                                 cx->promotion.threshold.count = 4;
 791                         else
 792                                 cx->promotion.threshold.count = 10;
 793                         if (higher->type == ACPI_STATE_C3)
 794                                 cx->promotion.threshold.bm = bm_history;
 795                 }
 796
 797                 higher = cx;
 798         }
 799
 800         return 0;
 801 }
 802 #endif /* !CONFIG_CPU_IDLE */
 803
 804 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 805 {
 806
 807         if (!pr)
 808                 return -EINVAL;
 809
 810         if (!pr->pblk)
 811                 return -ENODEV;
 812
 813         /* if info is obtained from pblk/fadt, type equals state */
 814         pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
 815         pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
 816
 817 #ifndef CONFIG_HOTPLUG_CPU
 818         /*
 819          * Check for P_LVL2_UP flag before entering C2 and above on
 820          * an SMP system.
 821          */
 822         if ((num_online_cpus() > 1) &&
 823             !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 824                 return -ENODEV;
 825 #endif
 826
 827         /* determine C2 and C3 address from pblk */
 828         pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
 829         pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
 830
 831         /* determine latencies from FADT */
 832         pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
 833         pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
 834
 835         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 836                           "lvl2[0x%08x] lvl3[0x%08x]\n",
 837                           pr->power.states[ACPI_STATE_C2].address,
 838                           pr->power.states[ACPI_STATE_C3].address));
 839
 840         return 0;
 841 }
 842
 843 static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
 844 {
 845         if (!pr->power.states[ACPI_STATE_C1].valid) {
 846                 /* set the first C-State to C1 */
 847                 /* all processors need to support C1 */
 848                 pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
 849                 pr->power.states[ACPI_STATE_C1].valid = 1;
 850         }
 851         /* the C0 state only exists as a filler in our array */
 852         pr->power.states[ACPI_STATE_C0].valid = 1;
 853         return 0;
 854 }
 855
 856 static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
 857 {
 858         acpi_status status = 0;
 859         acpi_integer count;
 860         int current_count;
 861         int i;
 862         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 863         union acpi_object *cst;
 864
 865
 866         if (nocst)
 867                 return -ENODEV;
 868
 869         current_count = 0;
 870
 871         status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
 872         if (ACPI_FAILURE(status)) {
 873                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _CST, giving up\n"));
 874                 return -ENODEV;
 875         }
 876
 877         cst = buffer.pointer;
 878
 879         /* There must be at least 2 elements */
 880         if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
 881                 printk(KERN_ERR PREFIX "not enough elements in _CST\n");
 882                 status = -EFAULT;
 883                 goto end;
 884         }
 885
 886         count = cst->package.elements[0].integer.value;
 887
 888         /* Validate number of power states. */
 889         if (count < 1 || count != cst->package.count - 1) {
 890                 printk(KERN_ERR PREFIX "count given by _CST is not valid\n");
 891                 status = -EFAULT;
 892                 goto end;
 893         }
 894
 895         /* Tell driver that at least _CST is supported. */
 896         pr->flags.has_cst = 1;
 897
 898         for (i = 1; i <= count; i++) {
 899                 union acpi_object *element;
 900                 union acpi_object *obj;
 901                 struct acpi_power_register *reg;
 902                 struct acpi_processor_cx cx;
 903
 904                 memset(&cx, 0, sizeof(cx));
 905
 906                 element = &(cst->package.elements[i]);
 907                 if (element->type != ACPI_TYPE_PACKAGE)
 908                         continue;
 909
 910                 if (element->package.count != 4)
 911                         continue;
 912
 913                 obj = &(element->package.elements[0]);
 914
 915                 if (obj->type != ACPI_TYPE_BUFFER)
 916                         continue;
 917
 918                 reg = (struct acpi_power_register *)obj->buffer.pointer;
 919
 920                 if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
 921                     (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE))
 922                         continue;
 923
 924                 /* There should be an easy way to extract an integer... */
 925                 obj = &(element->package.elements[1]);
 926                 if (obj->type != ACPI_TYPE_INTEGER)
 927                         continue;
 928
 929                 cx.type = obj->integer.value;
 930                 /*
 931                  * Some buggy BIOSes won't list C1 in _CST -
 932                  * Let acpi_processor_get_power_info_default() handle them later
 933                  */
 934                 if (i == 1 && cx.type != ACPI_STATE_C1)
 935                         current_count++;
 936
 937                 cx.address = reg->address;
 938                 cx.index = current_count + 1;
 939
 940                 cx.entry_method = ACPI_CSTATE_SYSTEMIO;
 941                 if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
 942                         if (acpi_processor_ffh_cstate_probe
 943                                         (pr->id, &cx, reg) == 0) {
 944                                 cx.entry_method = ACPI_CSTATE_FFH;
 945                         } else if (cx.type == ACPI_STATE_C1) {
 946                                 /*
 947                                  * C1 is a special case where FIXED_HARDWARE
 948                                  * can be handled in non-MWAIT way as well.
 949                                  * In that case, save this _CST entry info.
 950                                  * Otherwise, ignore this info and continue.
 951                                  */
 952                                 cx.entry_method = ACPI_CSTATE_HALT;
 953                                 snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
 954                         } else {
 955                                 continue;
 956                         }
 957                 } else {
 958                         snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
 959                                  cx.address);
 960                 }
 961
 962
 963                 obj = &(element->package.elements[2]);
 964                 if (obj->type != ACPI_TYPE_INTEGER)
 965                         continue;
 966
 967                 cx.latency = obj->integer.value;
 968
 969                 obj = &(element->package.elements[3]);
 970                 if (obj->type != ACPI_TYPE_INTEGER)
 971                         continue;
 972
 973                 cx.power = obj->integer.value;
 974
 975                 current_count++;
 976                 memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx));
 977
 978                 /*
 979                  * We support total ACPI_PROCESSOR_MAX_POWER - 1
 980                  * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1)
 981                  */
 982                 if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) {
 983                         printk(KERN_WARNING
 984                                "Limiting number of power states to max (%d)\n",
 985                                ACPI_PROCESSOR_MAX_POWER);
 986                         printk(KERN_WARNING
 987                                "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
 988                         break;
 989                 }
 990         }
 991
 992         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n",
 993                           current_count));
 994
 995         /* Validate number of power states discovered */
 996         if (current_count < 2)
 997                 status = -EFAULT;
 998
 999       end:
1000         kfree(buffer.pointer);
1001
1002         return status;
1003 }
1004
1005 static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
1006 {
1007
1008         if (!cx->address)
1009                 return;
1010
1011         /*
1012          * C2 latency must be less than or equal to 100
1013          * microseconds.
1014          */
1015         else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
1016                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1017                                   "latency too large [%d]\n", cx->latency));
1018                 return;
1019         }
1020
1021         /*
1022          * Otherwise we've met all of our C2 requirements.
1023          * Normalize the C2 latency to expidite policy
1024          */
1025         cx->valid = 1;
1026
1027 #ifndef CONFIG_CPU_IDLE
1028         cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
1029 #else
1030         cx->latency_ticks = cx->latency;
1031 #endif
1032
1033         return;
1034 }
1035
1036 static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
1037                                            struct acpi_processor_cx *cx)
1038 {
1039         static int bm_check_flag;
1040
1041
1042         if (!cx->address)
1043                 return;
1044
1045         /*
1046          * C3 latency must be less than or equal to 1000
1047          * microseconds.
1048          */
1049         else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
1050                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1051                                   "latency too large [%d]\n", cx->latency));
1052                 return;
1053         }
1054
1055         /*
1056          * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
1057          * DMA transfers are used by any ISA device to avoid livelock.
1058          * Note that we could disable Type-F DMA (as recommended by
1059          * the erratum), but this is known to disrupt certain ISA
1060          * devices thus we take the conservative approach.
1061          */
1062         else if (errata.piix4.fdma) {
1063                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1064                                   "C3 not supported on PIIX4 with Type-F DMA\n"));
1065                 return;
1066         }
1067
1068         /* All the logic here assumes flags.bm_check is same across all CPUs */
1069         if (!bm_check_flag) {
1070                 /* Determine whether bm_check is needed based on CPU  */
1071                 acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
1072                 bm_check_flag = pr->flags.bm_check;
1073         } else {
1074                 pr->flags.bm_check = bm_check_flag;
1075         }
1076
1077         if (pr->flags.bm_check) {
1078                 if (!pr->flags.bm_control) {
1079                         if (pr->flags.has_cst != 1) {
1080                                 /* bus mastering control is necessary */
1081                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1082                                         "C3 support requires BM control\n"));
1083                                 return;
1084                         } else {
1085                                 /* Here we enter C3 without bus mastering */
1086                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1087                                         "C3 support without BM control\n"));
1088                         }
1089                 }
1090         } else {
1091                 /*
1092                  * WBINVD should be set in fadt, for C3 state to be
1093                  * supported on when bm_check is not required.
1094                  */
1095                 if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
1096                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1097                                           "Cache invalidation should work properly"
1098                                           " for C3 to be enabled on SMP systems\n"));
1099                         return;
1100                 }
1101                 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
1102         }
1103
1104         /*
1105          * Otherwise we've met all of our C3 requirements.
1106          * Normalize the C3 latency to expidite policy.  Enable
1107          * checking of bus mastering status (bm_check) so we can
1108          * use this in our C3 policy
1109          */
1110         cx->valid = 1;
1111
1112 #ifndef CONFIG_CPU_IDLE
1113         cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
1114 #else
1115         cx->latency_ticks = cx->latency;
1116 #endif
1117
1118         return;
1119 }
1120
1121 static int acpi_processor_power_verify(struct acpi_processor *pr)
1122 {
1123         unsigned int i;
1124         unsigned int working = 0;
1125
1126         pr->power.timer_broadcast_on_state = INT_MAX;
1127
1128         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
1129                 struct acpi_processor_cx *cx = &pr->power.states[i];
1130
1131                 switch (cx->type) {
1132                 case ACPI_STATE_C1:
1133                         cx->valid = 1;
1134                         break;
1135
1136                 case ACPI_STATE_C2:
1137                         acpi_processor_power_verify_c2(cx);
1138                         if (cx->valid)
1139                                 acpi_timer_check_state(i, pr, cx);
1140                         break;
1141
1142                 case ACPI_STATE_C3:
1143                         acpi_processor_power_verify_c3(pr, cx);
1144                         if (cx->valid)
1145                                 acpi_timer_check_state(i, pr, cx);
1146                         break;
1147                 }
1148
1149                 if (cx->valid)
1150                         working++;
1151         }
1152
1153         acpi_propagate_timer_broadcast(pr);
1154
1155         return (working);
1156 }
1157
1158 static int acpi_processor_get_power_info(struct acpi_processor *pr)
1159 {
1160         unsigned int i;
1161         int result;
1162
1163
1164         /* NOTE: the idle thread may not be running while calling
1165          * this function */
1166
1167         /* Zero initialize all the C-states info. */
1168         memset(pr->power.states, 0, sizeof(pr->power.states));
1169
1170         result = acpi_processor_get_power_info_cst(pr);
1171         if (result == -ENODEV)
1172                 result = acpi_processor_get_power_info_fadt(pr);
1173
1174         if (result)
1175                 return result;
1176
1177         acpi_processor_get_power_info_default(pr);
1178
1179         pr->power.count = acpi_processor_power_verify(pr);
1180
1181 #ifndef CONFIG_CPU_IDLE
1182         /*
1183          * Set Default Policy
1184          * ------------------
1185          * Now that we know which states are supported, set the default
1186          * policy.  Note that this policy can be changed dynamically
1187          * (e.g. encourage deeper sleeps to conserve battery life when
1188          * not on AC).
1189          */
1190         result = acpi_processor_set_power_policy(pr);
1191         if (result)
1192                 return result;
1193 #endif
1194
1195         /*
1196          * if one state of type C2 or C3 is available, mark this
1197          * CPU as being "idle manageable"
1198          */
1199         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
1200                 if (pr->power.states[i].valid) {
1201                         pr->power.count = i;
1202                         if (pr->power.states[i].type >= ACPI_STATE_C2)
1203                                 pr->flags.power = 1;
1204                 }
1205         }
1206
1207         return 0;
1208 }
1209
1210 static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
1211 {
1212         struct acpi_processor *pr = seq->private;
1213         unsigned int i;
1214
1215
1216         if (!pr)
1217                 goto end;
1218
1219         seq_printf(seq, "active state:            C%zd\n"
1220                    "max_cstate:              C%d\n"
1221                    "bus master activity:     %08x\n"
1222                    "maximum allowed latency: %d usec\n",
1223                    pr->power.state ? pr->power.state - pr->power.states : 0,
1224                    max_cstate, (unsigned)pr->power.bm_activity,
1225                    pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
1226
1227         seq_puts(seq, "states:\n");
1228
1229         for (i = 1; i <= pr->power.count; i++) {
1230                 seq_printf(seq, "   %cC%d:                  ",
1231                            (&pr->power.states[i] ==
1232                             pr->power.state ? '*' : ' '), i);
1233
1234                 if (!pr->power.states[i].valid) {
1235                         seq_puts(seq, "<not supported>\n");
1236                         continue;
1237                 }
1238
1239                 switch (pr->power.states[i].type) {
1240                 case ACPI_STATE_C1:
1241                         seq_printf(seq, "type[C1] ");
1242                         break;
1243                 case ACPI_STATE_C2:
1244                         seq_printf(seq, "type[C2] ");
1245                         break;
1246                 case ACPI_STATE_C3:
1247                         seq_printf(seq, "type[C3] ");
1248                         break;
1249                 default:
1250                         seq_printf(seq, "type[--] ");
1251                         break;
1252                 }
1253
1254                 if (pr->power.states[i].promotion.state)
1255                         seq_printf(seq, "promotion[C%zd] ",
1256                                    (pr->power.states[i].promotion.state -
1257                                     pr->power.states));
1258                 else
1259                         seq_puts(seq, "promotion[--] ");
1260
1261                 if (pr->power.states[i].demotion.state)
1262                         seq_printf(seq, "demotion[C%zd] ",
1263                                    (pr->power.states[i].demotion.state -
1264                                     pr->power.states));
1265                 else
1266                         seq_puts(seq, "demotion[--] ");
1267
1268                 seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
1269                            pr->power.states[i].latency,
1270                            pr->power.states[i].usage,
1271                            (unsigned long long)pr->power.states[i].time);
1272         }
1273
1274       end:
1275         return 0;
1276 }
1277
1278 static int acpi_processor_power_open_fs(struct inode *inode, struct file *file)
1279 {
1280         return single_open(file, acpi_processor_power_seq_show,
1281                            PDE(inode)->data);
1282 }
1283
1284 static const struct file_operations acpi_processor_power_fops = {
1285         .open = acpi_processor_power_open_fs,
1286         .read = seq_read,
1287         .llseek = seq_lseek,
1288         .release = single_release,
1289 };
1290
1291 #ifndef CONFIG_CPU_IDLE
1292
1293 int acpi_processor_cst_has_changed(struct acpi_processor *pr)
1294 {
1295         int result = 0;
1296
1297
1298         if (!pr)
1299                 return -EINVAL;
1300
1301         if (nocst) {
1302                 return -ENODEV;
1303         }
1304
1305         if (!pr->flags.power_setup_done)
1306                 return -ENODEV;
1307
1308         /* Fall back to the default idle loop */
1309         pm_idle = pm_idle_save;
1310         synchronize_sched();    /* Relies on interrupts forcing exit from idle. */
1311
1312         pr->flags.power = 0;
1313         result = acpi_processor_get_power_info(pr);
1314         if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
1315                 pm_idle = acpi_processor_idle;
1316
1317         return result;
1318 }
1319
1320 #ifdef CONFIG_SMP
1321 static void smp_callback(void *v)
1322 {
1323         /* we already woke the CPU up, nothing more to do */
1324 }
1325
1326 /*
1327  * This function gets called when a part of the kernel has a new latency
1328  * requirement.  This means we need to get all processors out of their C-state,
1329  * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that
1330  * wakes them all right up.
1331  */
1332 static int acpi_processor_latency_notify(struct notifier_block *b,
1333                 unsigned long l, void *v)
1334 {
1335         smp_call_function(smp_callback, NULL, 0, 1);
1336         return NOTIFY_OK;
1337 }
1338
1339 static struct notifier_block acpi_processor_latency_notifier = {
1340         .notifier_call = acpi_processor_latency_notify,
1341 };
1342
1343 #endif
1344
1345 #else /* CONFIG_CPU_IDLE */
1346
1347 /**
1348  * acpi_idle_bm_check - checks if bus master activity was detected
1349  */
1350 static int acpi_idle_bm_check(void)
1351 {
1352         u32 bm_status = 0;
1353
1354         acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
1355         if (bm_status)
1356                 acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
1357         /*
1358          * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
1359          * the true state of bus mastering activity; forcing us to
1360          * manually check the BMIDEA bit of each IDE channel.
1361          */
1362         else if (errata.piix4.bmisx) {
1363                 if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
1364                     || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
1365                         bm_status = 1;
1366         }
1367         return bm_status;
1368 }
1369
1370 /**
1371  * acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state
1372  * @pr: the processor
1373  * @target: the new target state
1374  */
1375 static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
1376                                            struct acpi_processor_cx *target)
1377 {
1378         if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) {
1379                 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
1380                 pr->flags.bm_rld_set = 0;
1381         }
1382
1383         if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) {
1384                 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
1385                 pr->flags.bm_rld_set = 1;
1386         }
1387 }
1388
1389 /**
1390  * acpi_idle_do_entry - a helper function that does C2 and C3 type entry
1391  * @cx: cstate data
1392  *
1393  * Caller disables interrupt before call and enables interrupt after return.
1394  */
1395 static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
1396 {
1397         if (cx->entry_method == ACPI_CSTATE_FFH) {
1398                 /* Call into architectural FFH based C-state */
1399                 acpi_processor_ffh_cstate_enter(cx);
1400         } else if (cx->entry_method == ACPI_CSTATE_HALT) {
1401                 acpi_safe_halt();
1402         } else {
1403                 int unused;
1404                 /* IO port based C-state */
1405                 inb(cx->address);
1406                 /* Dummy wait op - must do something useless after P_LVL2 read
1407                    because chipsets cannot guarantee that STPCLK# signal
1408                    gets asserted in time to freeze execution properly. */
1409                 unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
1410         }
1411 }
1412
1413 /**
1414  * acpi_idle_enter_c1 - enters an ACPI C1 state-type
1415  * @dev: the target CPU
1416  * @state: the state data
1417  *
1418  * This is equivalent to the HALT instruction.
1419  */
1420 static int acpi_idle_enter_c1(struct cpuidle_device *dev,
1421                               struct cpuidle_state *state)
1422 {
1423         u32 t1, t2;
1424         struct acpi_processor *pr;
1425         struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
1426
1427         pr = processors[smp_processor_id()];
1428
1429         if (unlikely(!pr))
1430                 return 0;
1431
1432         local_irq_disable();
1433
1434         /* Do not access any ACPI IO ports in suspend path */
1435         if (acpi_idle_suspend) {
1436                 acpi_safe_halt();
1437                 local_irq_enable();
1438                 return 0;
1439         }
1440
1441         if (pr->flags.bm_check)
1442                 acpi_idle_update_bm_rld(pr, cx);
1443
1444         t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1445         acpi_idle_do_entry(cx);
1446         t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1447
1448         local_irq_enable();
1449         cx->usage++;
1450
1451         return ticks_elapsed_in_us(t1, t2);
1452 }
1453
1454 /**
1455  * acpi_idle_enter_simple - enters an ACPI state without BM handling
1456  * @dev: the target CPU
1457  * @state: the state data
1458  */
1459 static int acpi_idle_enter_simple(struct cpuidle_device *dev,
1460                                   struct cpuidle_state *state)
1461 {
1462         struct acpi_processor *pr;
1463         struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
1464         u32 t1, t2;
1465         int sleep_ticks = 0;
1466
1467         pr = processors[smp_processor_id()];
1468
1469         if (unlikely(!pr))
1470                 return 0;
1471
1472         if (acpi_idle_suspend)
1473                 return(acpi_idle_enter_c1(dev, state));
1474
1475         local_irq_disable();
1476         current_thread_info()->status &= ~TS_POLLING;
1477         /*
1478          * TS_POLLING-cleared state must be visible before we test
1479          * NEED_RESCHED:
1480          */
1481         smp_mb();
1482
1483         if (unlikely(need_resched())) {
1484                 current_thread_info()->status |= TS_POLLING;
1485                 local_irq_enable();
1486                 return 0;
1487         }
1488
1489         /*
1490          * Must be done before busmaster disable as we might need to
1491          * access HPET !
1492          */
1493         acpi_state_timer_broadcast(pr, cx, 1);
1494
1495         if (pr->flags.bm_check)
1496                 acpi_idle_update_bm_rld(pr, cx);
1497
1498         if (cx->type == ACPI_STATE_C3)
1499                 ACPI_FLUSH_CPU_CACHE();
1500
1501         t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1502         /* Tell the scheduler that we are going deep-idle: */
1503         sched_clock_idle_sleep_event();
1504         acpi_idle_do_entry(cx);
1505         t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1506
1507 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
1508         /* TSC could halt in idle, so notify users */
1509         if (tsc_halts_in_c(cx->type))
1510                 mark_tsc_unstable("TSC halts in idle");;
1511 #endif
1512         sleep_ticks = ticks_elapsed(t1, t2);
1513
1514         /* Tell the scheduler how much we idled: */
1515         sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
1516
1517         local_irq_enable();
1518         current_thread_info()->status |= TS_POLLING;
1519
1520         cx->usage++;
1521
1522         acpi_state_timer_broadcast(pr, cx, 0);
1523         cx->time += sleep_ticks;
1524         return ticks_elapsed_in_us(t1, t2);
1525 }
1526
1527 static int c3_cpu_count;
1528 static DEFINE_SPINLOCK(c3_lock);
1529
1530 /**
1531  * acpi_idle_enter_bm - enters C3 with proper BM handling
1532  * @dev: the target CPU
1533  * @state: the state data
1534  *
1535  * If BM is detected, the deepest non-C3 idle state is entered instead.
1536  */
1537 static int acpi_idle_enter_bm(struct cpuidle_device *dev,
1538                               struct cpuidle_state *state)
1539 {
1540         struct acpi_processor *pr;
1541         struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
1542         u32 t1, t2;
1543         int sleep_ticks = 0;
1544
1545         pr = processors[smp_processor_id()];
1546
1547         if (unlikely(!pr))
1548                 return 0;
1549
1550         if (acpi_idle_suspend)
1551                 return(acpi_idle_enter_c1(dev, state));
1552
1553         if (acpi_idle_bm_check()) {
1554                 if (dev->safe_state) {
1555                         return dev->safe_state->enter(dev, dev->safe_state);
1556                 } else {
1557                         local_irq_disable();
1558                         acpi_safe_halt();
1559                         local_irq_enable();
1560                         return 0;
1561                 }
1562         }
1563
1564         local_irq_disable();
1565         current_thread_info()->status &= ~TS_POLLING;
1566         /*
1567          * TS_POLLING-cleared state must be visible before we test
1568          * NEED_RESCHED:
1569          */
1570         smp_mb();
1571
1572         if (unlikely(need_resched())) {
1573                 current_thread_info()->status |= TS_POLLING;
1574                 local_irq_enable();
1575                 return 0;
1576         }
1577
1578         acpi_unlazy_tlb(smp_processor_id());
1579
1580         /* Tell the scheduler that we are going deep-idle: */
1581         sched_clock_idle_sleep_event();
1582         /*
1583          * Must be done before busmaster disable as we might need to
1584          * access HPET !
1585          */
1586         acpi_state_timer_broadcast(pr, cx, 1);
1587
1588         acpi_idle_update_bm_rld(pr, cx);
1589
1590         /*
1591          * disable bus master
1592          * bm_check implies we need ARB_DIS
1593          * !bm_check implies we need cache flush
1594          * bm_control implies whether we can do ARB_DIS
1595          *
1596          * That leaves a case where bm_check is set and bm_control is
1597          * not set. In that case we cannot do much, we enter C3
1598          * without doing anything.
1599          */
1600         if (pr->flags.bm_check && pr->flags.bm_control) {
1601                 spin_lock(&c3_lock);
1602                 c3_cpu_count++;
1603                 /* Disable bus master arbitration when all CPUs are in C3 */
1604                 if (c3_cpu_count == num_online_cpus())
1605                         acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
1606                 spin_unlock(&c3_lock);
1607         } else if (!pr->flags.bm_check) {
1608                 ACPI_FLUSH_CPU_CACHE();
1609         }
1610
1611         t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1612         acpi_idle_do_entry(cx);
1613         t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
1614
1615         /* Re-enable bus master arbitration */
1616         if (pr->flags.bm_check && pr->flags.bm_control) {
1617                 spin_lock(&c3_lock);
1618                 acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
1619                 c3_cpu_count--;
1620                 spin_unlock(&c3_lock);
1621         }
1622
1623 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
1624         /* TSC could halt in idle, so notify users */
1625         if (tsc_halts_in_c(ACPI_STATE_C3))
1626                 mark_tsc_unstable("TSC halts in idle");
1627 #endif
1628         sleep_ticks = ticks_elapsed(t1, t2);
1629         /* Tell the scheduler how much we idled: */
1630         sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
1631
1632         local_irq_enable();
1633         current_thread_info()->status |= TS_POLLING;
1634
1635         cx->usage++;
1636
1637         acpi_state_timer_broadcast(pr, cx, 0);
1638         cx->time += sleep_ticks;
1639         return ticks_elapsed_in_us(t1, t2);
1640 }
1641
1642 struct cpuidle_driver acpi_idle_driver = {
1643         .name =         "acpi_idle",
1644         .owner =        THIS_MODULE,
1645 };
1646
1647 /**
1648  * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
1649  * @pr: the ACPI processor
1650  */
1651 static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
1652 {
1653         int i, count = CPUIDLE_DRIVER_STATE_START;
1654         struct acpi_processor_cx *cx;
1655         struct cpuidle_state *state;
1656         struct cpuidle_device *dev = &pr->power.dev;
1657
1658         if (!pr->flags.power_setup_done)
1659                 return -EINVAL;
1660
1661         if (pr->flags.power == 0) {
1662                 return -EINVAL;
1663         }
1664
1665         for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
1666                 dev->states[i].name[0] = '\0';
1667                 dev->states[i].desc[0] = '\0';
1668         }
1669
1670         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
1671                 cx = &pr->power.states[i];
1672                 state = &dev->states[count];
1673
1674                 if (!cx->valid)
1675                         continue;
1676
1677 #ifdef CONFIG_HOTPLUG_CPU
1678                 if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
1679                     !pr->flags.has_cst &&
1680                     !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
1681                         continue;
1682 #endif
1683                 cpuidle_set_statedata(state, cx);
1684
1685                 snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
1686                 strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
1687                 state->exit_latency = cx->latency;
1688                 state->target_residency = cx->latency * latency_factor;
1689                 state->power_usage = cx->power;
1690
1691                 state->flags = 0;
1692                 switch (cx->type) {
1693                         case ACPI_STATE_C1:
1694                         state->flags |= CPUIDLE_FLAG_SHALLOW;
1695                         if (cx->entry_method == ACPI_CSTATE_FFH)
1696                                 state->flags |= CPUIDLE_FLAG_TIME_VALID;
1697
1698                         state->enter = acpi_idle_enter_c1;
1699                         dev->safe_state = state;
1700                         break;
1701
1702                         case ACPI_STATE_C2:
1703                         state->flags |= CPUIDLE_FLAG_BALANCED;
1704                         state->flags |= CPUIDLE_FLAG_TIME_VALID;
1705                         state->enter = acpi_idle_enter_simple;
1706                         dev->safe_state = state;
1707                         break;
1708
1709                         case ACPI_STATE_C3:
1710                         state->flags |= CPUIDLE_FLAG_DEEP;
1711                         state->flags |= CPUIDLE_FLAG_TIME_VALID;
1712                         state->flags |= CPUIDLE_FLAG_CHECK_BM;
1713                         state->enter = pr->flags.bm_check ?
1714                                         acpi_idle_enter_bm :
1715                                         acpi_idle_enter_simple;
1716                         break;
1717                 }
1718
1719                 count++;
1720                 if (count == CPUIDLE_STATE_MAX)
1721                         break;
1722         }
1723
1724         dev->state_count = count;
1725
1726         if (!count)
1727                 return -EINVAL;
1728
1729         return 0;
1730 }
1731
1732 int acpi_processor_cst_has_changed(struct acpi_processor *pr)
1733 {
1734         int ret;
1735
1736         if (!pr)
1737                 return -EINVAL;
1738
1739         if (nocst) {
1740                 return -ENODEV;
1741         }
1742
1743         if (!pr->flags.power_setup_done)
1744                 return -ENODEV;
1745
1746         cpuidle_pause_and_lock();
1747         cpuidle_disable_device(&pr->power.dev);
1748         acpi_processor_get_power_info(pr);
1749         acpi_processor_setup_cpuidle(pr);
1750         ret = cpuidle_enable_device(&pr->power.dev);
1751         cpuidle_resume_and_unlock();
1752
1753         return ret;
1754 }
1755
1756 #endif /* CONFIG_CPU_IDLE */
1757
1758 int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
1759                               struct acpi_device *device)
1760 {
1761         acpi_status status = 0;
1762         static int first_run;
1763         struct proc_dir_entry *entry = NULL;
1764         unsigned int i;
1765
1766
1767         if (!first_run) {
1768                 dmi_check_system(processor_power_dmi_table);
1769                 max_cstate = acpi_processor_cstate_check(max_cstate);
1770                 if (max_cstate < ACPI_C_STATES_MAX)
1771                         printk(KERN_NOTICE
1772                                "ACPI: processor limited to max C-state %d\n",
1773                                max_cstate);
1774                 first_run++;
1775 #if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
1776                 pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
1777                                 &acpi_processor_latency_notifier);
1778 #endif
1779         }
1780
1781         if (!pr)
1782                 return -EINVAL;
1783
1784         if (acpi_gbl_FADT.cst_control && !nocst) {
1785                 status =
1786                     acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8);
1787                 if (ACPI_FAILURE(status)) {
1788                         ACPI_EXCEPTION((AE_INFO, status,
1789                                         "Notifying BIOS of _CST ability failed"));
1790                 }
1791         }
1792
1793         acpi_processor_get_power_info(pr);
1794         pr->flags.power_setup_done = 1;
1795
1796         /*
1797          * Install the idle handler if processor power management is supported.
1798          * Note that we use previously set idle handler will be used on
1799          * platforms that only support C1.
1800          */
1801         if ((pr->flags.power) && (!boot_option_idle_override)) {
1802 #ifdef CONFIG_CPU_IDLE
1803                 acpi_processor_setup_cpuidle(pr);
1804                 pr->power.dev.cpu = pr->id;
1805                 if (cpuidle_register_device(&pr->power.dev))
1806                         return -EIO;
1807 #endif
1808
1809                 printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
1810                 for (i = 1; i <= pr->power.count; i++)
1811                         if (pr->power.states[i].valid)
1812                                 printk(" C%d[C%d]", i,
1813                                        pr->power.states[i].type);
1814                 printk(")\n");
1815
1816 #ifndef CONFIG_CPU_IDLE
1817                 if (pr->id == 0) {
1818                         pm_idle_save = pm_idle;
1819                         pm_idle = acpi_processor_idle;
1820                 }
1821 #endif
1822         }
1823
1824         /* 'power' [R] */
1825         entry = create_proc_entry(ACPI_PROCESSOR_FILE_POWER,
1826                                   S_IRUGO, acpi_device_dir(device));
1827         if (!entry)
1828                 return -EIO;
1829         else {
1830                 entry->proc_fops = &acpi_processor_power_fops;
1831                 entry->data = acpi_driver_data(device);
1832                 entry->owner = THIS_MODULE;
1833         }
1834
1835         return 0;
1836 }
1837
1838 int acpi_processor_power_exit(struct acpi_processor *pr,
1839                               struct acpi_device *device)
1840 {
1841 #ifdef CONFIG_CPU_IDLE
1842         if ((pr->flags.power) && (!boot_option_idle_override))
1843                 cpuidle_unregister_device(&pr->power.dev);
1844 #endif
1845         pr->flags.power_setup_done = 0;
1846
1847         if (acpi_device_dir(device))
1848                 remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
1849                                   acpi_device_dir(device));
1850
1851 #ifndef CONFIG_CPU_IDLE
1852
1853         /* Unregister the idle handler when processor #0 is removed. */
1854         if (pr->id == 0) {
1855                 pm_idle = pm_idle_save;
1856
1857                 /*
1858                  * We are about to unload the current idle thread pm callback
1859                  * (pm_idle), Wait for all processors to update cached/local
1860                  * copies of pm_idle before proceeding.
1861                  */
1862                 cpu_idle_wait();
1863 #ifdef CONFIG_SMP
1864                 pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
1865                                 &acpi_processor_latency_notifier);
1866 #endif
1867         }
1868 #endif
1869
1870         return 0;
1871 }