err.no Git - linux-2.6/blob - drivers/acpi/namespace/nsutils.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nsutils - Utilities for accessing ACPI namespace, accessing
   4  *                        parents and siblings and Scope manipulation
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2008, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acnamesp.h>
  47 #include <acpi/amlcode.h>
  48 #include <acpi/actables.h>
  49
  50 #define _COMPONENT          ACPI_NAMESPACE
  51 ACPI_MODULE_NAME("nsutils")
  52
  53 /* Local prototypes */
  54 static u8 acpi_ns_valid_path_separator(char sep);
  55
  56 #ifdef ACPI_OBSOLETE_FUNCTIONS
  57 acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
  58 #endif
  59
  60 /*******************************************************************************
  61  *
  62  * FUNCTION:    acpi_ns_report_error
  63  *
  64  * PARAMETERS:  module_name         - Caller's module name (for error output)
  65  *              line_number         - Caller's line number (for error output)
  66  *              internal_name       - Name or path of the namespace node
  67  *              lookup_status       - Exception code from NS lookup
  68  *
  69  * RETURN:      None
  70  *
  71  * DESCRIPTION: Print warning message with full pathname
  72  *
  73  ******************************************************************************/
  74
  75 void
  76 acpi_ns_report_error(char *module_name,
  77                      u32 line_number,
  78                      char *internal_name, acpi_status lookup_status)
  79 {
  80         acpi_status status;
  81         u32 bad_name;
  82         char *name = NULL;
  83
  84         acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
  85
  86         if (lookup_status == AE_BAD_CHARACTER) {
  87
  88                 /* There is a non-ascii character in the name */
  89
  90                 ACPI_MOVE_32_TO_32(&bad_name, internal_name);
  91                 acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
  92         } else {
  93                 /* Convert path to external format */
  94
  95                 status = acpi_ns_externalize_name(ACPI_UINT32_MAX,
  96                                                   internal_name, NULL, &name);
  97
  98                 /* Print target name */
  99
 100                 if (ACPI_SUCCESS(status)) {
 101                         acpi_os_printf("[%s]", name);
 102                 } else {
 103                         acpi_os_printf("[COULD NOT EXTERNALIZE NAME]");
 104                 }
 105
 106                 if (name) {
 107                         ACPI_FREE(name);
 108                 }
 109         }
 110
 111         acpi_os_printf(" Namespace lookup failure, %s\n",
 112                        acpi_format_exception(lookup_status));
 113 }
 114
 115 /*******************************************************************************
 116  *
 117  * FUNCTION:    acpi_ns_report_method_error
 118  *
 119  * PARAMETERS:  module_name         - Caller's module name (for error output)
 120  *              line_number         - Caller's line number (for error output)
 121  *              Message             - Error message to use on failure
 122  *              prefix_node         - Prefix relative to the path
 123  *              Path                - Path to the node (optional)
 124  *              method_status       - Execution status
 125  *
 126  * RETURN:      None
 127  *
 128  * DESCRIPTION: Print warning message with full pathname
 129  *
 130  ******************************************************************************/
 131
 132 void
 133 acpi_ns_report_method_error(char *module_name,
 134                             u32 line_number,
 135                             char *message,
 136                             struct acpi_namespace_node *prefix_node,
 137                             char *path, acpi_status method_status)
 138 {
 139         acpi_status status;
 140         struct acpi_namespace_node *node = prefix_node;
 141
 142         acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
 143
 144         if (path) {
 145                 status =
 146                     acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH,
 147                                      &node);
 148                 if (ACPI_FAILURE(status)) {
 149                         acpi_os_printf("[Could not get node by pathname]");
 150                 }
 151         }
 152
 153         acpi_ns_print_node_pathname(node, message);
 154         acpi_os_printf(", %s\n", acpi_format_exception(method_status));
 155 }
 156
 157 /*******************************************************************************
 158  *
 159  * FUNCTION:    acpi_ns_print_node_pathname
 160  *
 161  * PARAMETERS:  Node            - Object
 162  *              Message         - Prefix message
 163  *
 164  * DESCRIPTION: Print an object's full namespace pathname
 165  *              Manages allocation/freeing of a pathname buffer
 166  *
 167  ******************************************************************************/
 168
 169 void
 170 acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *message)
 171 {
 172         struct acpi_buffer buffer;
 173         acpi_status status;
 174
 175         if (!node) {
 176                 acpi_os_printf("[NULL NAME]");
 177                 return;
 178         }
 179
 180         /* Convert handle to full pathname and print it (with supplied message) */
 181
 182         buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
 183
 184         status = acpi_ns_handle_to_pathname(node, &buffer);
 185         if (ACPI_SUCCESS(status)) {
 186                 if (message) {
 187                         acpi_os_printf("%s ", message);
 188                 }
 189
 190                 acpi_os_printf("[%s] (Node %p)", (char *)buffer.pointer, node);
 191                 ACPI_FREE(buffer.pointer);
 192         }
 193 }
 194
 195 /*******************************************************************************
 196  *
 197  * FUNCTION:    acpi_ns_valid_root_prefix
 198  *
 199  * PARAMETERS:  Prefix          - Character to be checked
 200  *
 201  * RETURN:      TRUE if a valid prefix
 202  *
 203  * DESCRIPTION: Check if a character is a valid ACPI Root prefix
 204  *
 205  ******************************************************************************/
 206
 207 u8 acpi_ns_valid_root_prefix(char prefix)
 208 {
 209
 210         return ((u8) (prefix == '\\'));
 211 }
 212
 213 /*******************************************************************************
 214  *
 215  * FUNCTION:    acpi_ns_valid_path_separator
 216  *
 217  * PARAMETERS:  Sep         - Character to be checked
 218  *
 219  * RETURN:      TRUE if a valid path separator
 220  *
 221  * DESCRIPTION: Check if a character is a valid ACPI path separator
 222  *
 223  ******************************************************************************/
 224
 225 static u8 acpi_ns_valid_path_separator(char sep)
 226 {
 227
 228         return ((u8) (sep == '.'));
 229 }
 230
 231 /*******************************************************************************
 232  *
 233  * FUNCTION:    acpi_ns_get_type
 234  *
 235  * PARAMETERS:  Node        - Parent Node to be examined
 236  *
 237  * RETURN:      Type field from Node whose handle is passed
 238  *
 239  * DESCRIPTION: Return the type of a Namespace node
 240  *
 241  ******************************************************************************/
 242
 243 acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node)
 244 {
 245         ACPI_FUNCTION_TRACE(ns_get_type);
 246
 247         if (!node) {
 248                 ACPI_WARNING((AE_INFO, "Null Node parameter"));
 249                 return_UINT32(ACPI_TYPE_ANY);
 250         }
 251
 252         return_UINT32((acpi_object_type) node->type);
 253 }
 254
 255 /*******************************************************************************
 256  *
 257  * FUNCTION:    acpi_ns_local
 258  *
 259  * PARAMETERS:  Type        - A namespace object type
 260  *
 261  * RETURN:      LOCAL if names must be found locally in objects of the
 262  *              passed type, 0 if enclosing scopes should be searched
 263  *
 264  * DESCRIPTION: Returns scope rule for the given object type.
 265  *
 266  ******************************************************************************/
 267
 268 u32 acpi_ns_local(acpi_object_type type)
 269 {
 270         ACPI_FUNCTION_TRACE(ns_local);
 271
 272         if (!acpi_ut_valid_object_type(type)) {
 273
 274                 /* Type code out of range  */
 275
 276                 ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
 277                 return_UINT32(ACPI_NS_NORMAL);
 278         }
 279
 280         return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
 281 }
 282
 283 /*******************************************************************************
 284  *
 285  * FUNCTION:    acpi_ns_get_internal_name_length
 286  *
 287  * PARAMETERS:  Info            - Info struct initialized with the
 288  *                                external name pointer.
 289  *
 290  * RETURN:      None
 291  *
 292  * DESCRIPTION: Calculate the length of the internal (AML) namestring
 293  *              corresponding to the external (ASL) namestring.
 294  *
 295  ******************************************************************************/
 296
 297 void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info)
 298 {
 299         char *next_external_char;
 300         u32 i;
 301
 302         ACPI_FUNCTION_ENTRY();
 303
 304         next_external_char = info->external_name;
 305         info->num_carats = 0;
 306         info->num_segments = 0;
 307         info->fully_qualified = FALSE;
 308
 309         /*
 310          * For the internal name, the required length is 4 bytes per segment, plus
 311          * 1 each for root_prefix, multi_name_prefix_op, segment count, trailing null
 312          * (which is not really needed, but no there's harm in putting it there)
 313          *
 314          * strlen() + 1 covers the first name_seg, which has no path separator
 315          */
 316         if (acpi_ns_valid_root_prefix(next_external_char[0])) {
 317                 info->fully_qualified = TRUE;
 318                 next_external_char++;
 319         } else {
 320                 /*
 321                  * Handle Carat prefixes
 322                  */
 323                 while (*next_external_char == '^') {
 324                         info->num_carats++;
 325                         next_external_char++;
 326                 }
 327         }
 328
 329         /*
 330          * Determine the number of ACPI name "segments" by counting the number of
 331          * path separators within the string. Start with one segment since the
 332          * segment count is [(# separators) + 1], and zero separators is ok.
 333          */
 334         if (*next_external_char) {
 335                 info->num_segments = 1;
 336                 for (i = 0; next_external_char[i]; i++) {
 337                         if (acpi_ns_valid_path_separator(next_external_char[i])) {
 338                                 info->num_segments++;
 339                         }
 340                 }
 341         }
 342
 343         info->length = (ACPI_NAME_SIZE * info->num_segments) +
 344             4 + info->num_carats;
 345
 346         info->next_external_char = next_external_char;
 347 }
 348
 349 /*******************************************************************************
 350  *
 351  * FUNCTION:    acpi_ns_build_internal_name
 352  *
 353  * PARAMETERS:  Info            - Info struct fully initialized
 354  *
 355  * RETURN:      Status
 356  *
 357  * DESCRIPTION: Construct the internal (AML) namestring
 358  *              corresponding to the external (ASL) namestring.
 359  *
 360  ******************************************************************************/
 361
 362 acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info)
 363 {
 364         u32 num_segments = info->num_segments;
 365         char *internal_name = info->internal_name;
 366         char *external_name = info->next_external_char;
 367         char *result = NULL;
 368         acpi_native_uint i;
 369
 370         ACPI_FUNCTION_TRACE(ns_build_internal_name);
 371
 372         /* Setup the correct prefixes, counts, and pointers */
 373
 374         if (info->fully_qualified) {
 375                 internal_name[0] = '\\';
 376
 377                 if (num_segments <= 1) {
 378                         result = &internal_name[1];
 379                 } else if (num_segments == 2) {
 380                         internal_name[1] = AML_DUAL_NAME_PREFIX;
 381                         result = &internal_name[2];
 382                 } else {
 383                         internal_name[1] = AML_MULTI_NAME_PREFIX_OP;
 384                         internal_name[2] = (char)num_segments;
 385                         result = &internal_name[3];
 386                 }
 387         } else {
 388                 /*
 389                  * Not fully qualified.
 390                  * Handle Carats first, then append the name segments
 391                  */
 392                 i = 0;
 393                 if (info->num_carats) {
 394                         for (i = 0; i < info->num_carats; i++) {
 395                                 internal_name[i] = '^';
 396                         }
 397                 }
 398
 399                 if (num_segments <= 1) {
 400                         result = &internal_name[i];
 401                 } else if (num_segments == 2) {
 402                         internal_name[i] = AML_DUAL_NAME_PREFIX;
 403                         result = &internal_name[(acpi_native_uint) (i + 1)];
 404                 } else {
 405                         internal_name[i] = AML_MULTI_NAME_PREFIX_OP;
 406                         internal_name[(acpi_native_uint) (i + 1)] =
 407                             (char)num_segments;
 408                         result = &internal_name[(acpi_native_uint) (i + 2)];
 409                 }
 410         }
 411
 412         /* Build the name (minus path separators) */
 413
 414         for (; num_segments; num_segments--) {
 415                 for (i = 0; i < ACPI_NAME_SIZE; i++) {
 416                         if (acpi_ns_valid_path_separator(*external_name) ||
 417                             (*external_name == 0)) {
 418
 419                                 /* Pad the segment with underscore(s) if segment is short */
 420
 421                                 result[i] = '_';
 422                         } else {
 423                                 /* Convert the character to uppercase and save it */
 424
 425                                 result[i] =
 426                                     (char)ACPI_TOUPPER((int)*external_name);
 427                                 external_name++;
 428                         }
 429                 }
 430
 431                 /* Now we must have a path separator, or the pathname is bad */
 432
 433                 if (!acpi_ns_valid_path_separator(*external_name) &&
 434                     (*external_name != 0)) {
 435                         return_ACPI_STATUS(AE_BAD_PARAMETER);
 436                 }
 437
 438                 /* Move on the next segment */
 439
 440                 external_name++;
 441                 result += ACPI_NAME_SIZE;
 442         }
 443
 444         /* Terminate the string */
 445
 446         *result = 0;
 447
 448         if (info->fully_qualified) {
 449                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 450                                   "Returning [%p] (abs) \"\\%s\"\n",
 451                                   internal_name, internal_name));
 452         } else {
 453                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Returning [%p] (rel) \"%s\"\n",
 454                                   internal_name, internal_name));
 455         }
 456
 457         return_ACPI_STATUS(AE_OK);
 458 }
 459
 460 /*******************************************************************************
 461  *
 462  * FUNCTION:    acpi_ns_internalize_name
 463  *
 464  * PARAMETERS:  *external_name          - External representation of name
 465  *              **Converted Name        - Where to return the resulting
 466  *                                        internal represention of the name
 467  *
 468  * RETURN:      Status
 469  *
 470  * DESCRIPTION: Convert an external representation (e.g. "\_PR_.CPU0")
 471  *              to internal form (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30)
 472  *
 473  *******************************************************************************/
 474
 475 acpi_status acpi_ns_internalize_name(char *external_name, char **converted_name)
 476 {
 477         char *internal_name;
 478         struct acpi_namestring_info info;
 479         acpi_status status;
 480
 481         ACPI_FUNCTION_TRACE(ns_internalize_name);
 482
 483         if ((!external_name) || (*external_name == 0) || (!converted_name)) {
 484                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 485         }
 486
 487         /* Get the length of the new internal name */
 488
 489         info.external_name = external_name;
 490         acpi_ns_get_internal_name_length(&info);
 491
 492         /* We need a segment to store the internal  name */
 493
 494         internal_name = ACPI_ALLOCATE_ZEROED(info.length);
 495         if (!internal_name) {
 496                 return_ACPI_STATUS(AE_NO_MEMORY);
 497         }
 498
 499         /* Build the name */
 500
 501         info.internal_name = internal_name;
 502         status = acpi_ns_build_internal_name(&info);
 503         if (ACPI_FAILURE(status)) {
 504                 ACPI_FREE(internal_name);
 505                 return_ACPI_STATUS(status);
 506         }
 507
 508         *converted_name = internal_name;
 509         return_ACPI_STATUS(AE_OK);
 510 }
 511
 512 /*******************************************************************************
 513  *
 514  * FUNCTION:    acpi_ns_externalize_name
 515  *
 516  * PARAMETERS:  internal_name_length - Lenth of the internal name below
 517  *              internal_name       - Internal representation of name
 518  *              converted_name_length - Where the length is returned
 519  *              converted_name      - Where the resulting external name
 520  *                                    is returned
 521  *
 522  * RETURN:      Status
 523  *
 524  * DESCRIPTION: Convert internal name (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30)
 525  *              to its external (printable) form (e.g. "\_PR_.CPU0")
 526  *
 527  ******************************************************************************/
 528
 529 acpi_status
 530 acpi_ns_externalize_name(u32 internal_name_length,
 531                          char *internal_name,
 532                          u32 * converted_name_length, char **converted_name)
 533 {
 534         acpi_native_uint names_index = 0;
 535         acpi_native_uint num_segments = 0;
 536         acpi_native_uint required_length;
 537         acpi_native_uint prefix_length = 0;
 538         acpi_native_uint i = 0;
 539         acpi_native_uint j = 0;
 540
 541         ACPI_FUNCTION_TRACE(ns_externalize_name);
 542
 543         if (!internal_name_length || !internal_name || !converted_name) {
 544                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 545         }
 546
 547         /*
 548          * Check for a prefix (one '\' | one or more '^').
 549          */
 550         switch (internal_name[0]) {
 551         case '\\':
 552                 prefix_length = 1;
 553                 break;
 554
 555         case '^':
 556                 for (i = 0; i < internal_name_length; i++) {
 557                         if (internal_name[i] == '^') {
 558                                 prefix_length = i + 1;
 559                         } else {
 560                                 break;
 561                         }
 562                 }
 563
 564                 if (i == internal_name_length) {
 565                         prefix_length = i;
 566                 }
 567
 568                 break;
 569
 570         default:
 571                 break;
 572         }
 573
 574         /*
 575          * Check for object names.  Note that there could be 0-255 of these
 576          * 4-byte elements.
 577          */
 578         if (prefix_length < internal_name_length) {
 579                 switch (internal_name[prefix_length]) {
 580                 case AML_MULTI_NAME_PREFIX_OP:
 581
 582                         /* <count> 4-byte names */
 583
 584                         names_index = prefix_length + 2;
 585                         num_segments = (acpi_native_uint) (u8)
 586                             internal_name[(acpi_native_uint)
 587                                           (prefix_length + 1)];
 588                         break;
 589
 590                 case AML_DUAL_NAME_PREFIX:
 591
 592                         /* Two 4-byte names */
 593
 594                         names_index = prefix_length + 1;
 595                         num_segments = 2;
 596                         break;
 597
 598                 case 0:
 599
 600                         /* null_name */
 601
 602                         names_index = 0;
 603                         num_segments = 0;
 604                         break;
 605
 606                 default:
 607
 608                         /* one 4-byte name */
 609
 610                         names_index = prefix_length;
 611                         num_segments = 1;
 612                         break;
 613                 }
 614         }
 615
 616         /*
 617          * Calculate the length of converted_name, which equals the length
 618          * of the prefix, length of all object names, length of any required
 619          * punctuation ('.') between object names, plus the NULL terminator.
 620          */
 621         required_length = prefix_length + (4 * num_segments) +
 622             ((num_segments > 0) ? (num_segments - 1) : 0) + 1;
 623
 624         /*
 625          * Check to see if we're still in bounds.  If not, there's a problem
 626          * with internal_name (invalid format).
 627          */
 628         if (required_length > internal_name_length) {
 629                 ACPI_ERROR((AE_INFO, "Invalid internal name"));
 630                 return_ACPI_STATUS(AE_BAD_PATHNAME);
 631         }
 632
 633         /*
 634          * Build converted_name
 635          */
 636         *converted_name = ACPI_ALLOCATE_ZEROED(required_length);
 637         if (!(*converted_name)) {
 638                 return_ACPI_STATUS(AE_NO_MEMORY);
 639         }
 640
 641         j = 0;
 642
 643         for (i = 0; i < prefix_length; i++) {
 644                 (*converted_name)[j++] = internal_name[i];
 645         }
 646
 647         if (num_segments > 0) {
 648                 for (i = 0; i < num_segments; i++) {
 649                         if (i > 0) {
 650                                 (*converted_name)[j++] = '.';
 651                         }
 652
 653                         (*converted_name)[j++] = internal_name[names_index++];
 654                         (*converted_name)[j++] = internal_name[names_index++];
 655                         (*converted_name)[j++] = internal_name[names_index++];
 656                         (*converted_name)[j++] = internal_name[names_index++];
 657                 }
 658         }
 659
 660         if (converted_name_length) {
 661                 *converted_name_length = (u32) required_length;
 662         }
 663
 664         return_ACPI_STATUS(AE_OK);
 665 }
 666
 667 /*******************************************************************************
 668  *
 669  * FUNCTION:    acpi_ns_map_handle_to_node
 670  *
 671  * PARAMETERS:  Handle          - Handle to be converted to an Node
 672  *
 673  * RETURN:      A Name table entry pointer
 674  *
 675  * DESCRIPTION: Convert a namespace handle to a real Node
 676  *
 677  * Note: Real integer handles would allow for more verification
 678  *       and keep all pointers within this subsystem - however this introduces
 679  *       more (and perhaps unnecessary) overhead.
 680  *
 681  ******************************************************************************/
 682
 683 struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle)
 684 {
 685
 686         ACPI_FUNCTION_ENTRY();
 687
 688         /*
 689          * Simple implementation
 690          */
 691         if ((!handle) || (handle == ACPI_ROOT_OBJECT)) {
 692                 return (acpi_gbl_root_node);
 693         }
 694
 695         /* We can at least attempt to verify the handle */
 696
 697         if (ACPI_GET_DESCRIPTOR_TYPE(handle) != ACPI_DESC_TYPE_NAMED) {
 698                 return (NULL);
 699         }
 700
 701         return (ACPI_CAST_PTR(struct acpi_namespace_node, handle));
 702 }
 703
 704 /*******************************************************************************
 705  *
 706  * FUNCTION:    acpi_ns_convert_entry_to_handle
 707  *
 708  * PARAMETERS:  Node          - Node to be converted to a Handle
 709  *
 710  * RETURN:      A user handle
 711  *
 712  * DESCRIPTION: Convert a real Node to a namespace handle
 713  *
 714  ******************************************************************************/
 715
 716 acpi_handle acpi_ns_convert_entry_to_handle(struct acpi_namespace_node *node)
 717 {
 718
 719         /*
 720          * Simple implementation for now;
 721          */
 722         return ((acpi_handle) node);
 723
 724 /* Example future implementation ---------------------
 725
 726         if (!Node)
 727         {
 728                 return (NULL);
 729         }
 730
 731         if (Node == acpi_gbl_root_node)
 732         {
 733                 return (ACPI_ROOT_OBJECT);
 734         }
 735
 736         return ((acpi_handle) Node);
 737 ------------------------------------------------------*/
 738 }
 739
 740 /*******************************************************************************
 741  *
 742  * FUNCTION:    acpi_ns_terminate
 743  *
 744  * PARAMETERS:  none
 745  *
 746  * RETURN:      none
 747  *
 748  * DESCRIPTION: free memory allocated for namespace and ACPI table storage.
 749  *
 750  ******************************************************************************/
 751
 752 void acpi_ns_terminate(void)
 753 {
 754         union acpi_operand_object *obj_desc;
 755
 756         ACPI_FUNCTION_TRACE(ns_terminate);
 757
 758         /*
 759          * 1) Free the entire namespace -- all nodes and objects
 760          *
 761          * Delete all object descriptors attached to namepsace nodes
 762          */
 763         acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
 764
 765         /* Detach any objects attached to the root */
 766
 767         obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
 768         if (obj_desc) {
 769                 acpi_ns_detach_object(acpi_gbl_root_node);
 770         }
 771
 772         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
 773         return_VOID;
 774 }
 775
 776 /*******************************************************************************
 777  *
 778  * FUNCTION:    acpi_ns_opens_scope
 779  *
 780  * PARAMETERS:  Type        - A valid namespace type
 781  *
 782  * RETURN:      NEWSCOPE if the passed type "opens a name scope" according
 783  *              to the ACPI specification, else 0
 784  *
 785  ******************************************************************************/
 786
 787 u32 acpi_ns_opens_scope(acpi_object_type type)
 788 {
 789         ACPI_FUNCTION_TRACE_STR(ns_opens_scope, acpi_ut_get_type_name(type));
 790
 791         if (!acpi_ut_valid_object_type(type)) {
 792
 793                 /* type code out of range  */
 794
 795                 ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
 796                 return_UINT32(ACPI_NS_NORMAL);
 797         }
 798
 799         return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
 800 }
 801
 802 /*******************************************************************************
 803  *
 804  * FUNCTION:    acpi_ns_get_node
 805  *
 806  * PARAMETERS:  *Pathname   - Name to be found, in external (ASL) format. The
 807  *                            \ (backslash) and ^ (carat) prefixes, and the
 808  *                            . (period) to separate segments are supported.
 809  *              prefix_node  - Root of subtree to be searched, or NS_ALL for the
 810  *                            root of the name space.  If Name is fully
 811  *                            qualified (first s8 is '\'), the passed value
 812  *                            of Scope will not be accessed.
 813  *              Flags       - Used to indicate whether to perform upsearch or
 814  *                            not.
 815  *              return_node - Where the Node is returned
 816  *
 817  * DESCRIPTION: Look up a name relative to a given scope and return the
 818  *              corresponding Node.  NOTE: Scope can be null.
 819  *
 820  * MUTEX:       Locks namespace
 821  *
 822  ******************************************************************************/
 823
 824 acpi_status
 825 acpi_ns_get_node(struct acpi_namespace_node *prefix_node,
 826                  char *pathname,
 827                  u32 flags, struct acpi_namespace_node **return_node)
 828 {
 829         union acpi_generic_state scope_info;
 830         acpi_status status;
 831         char *internal_path;
 832
 833         ACPI_FUNCTION_TRACE_PTR(ns_get_node, pathname);
 834
 835         if (!pathname) {
 836                 *return_node = prefix_node;
 837                 if (!prefix_node) {
 838                         *return_node = acpi_gbl_root_node;
 839                 }
 840                 return_ACPI_STATUS(AE_OK);
 841         }
 842
 843         /* Convert path to internal representation */
 844
 845         status = acpi_ns_internalize_name(pathname, &internal_path);
 846         if (ACPI_FAILURE(status)) {
 847                 return_ACPI_STATUS(status);
 848         }
 849
 850         /* Must lock namespace during lookup */
 851
 852         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 853         if (ACPI_FAILURE(status)) {
 854                 goto cleanup;
 855         }
 856
 857         /* Setup lookup scope (search starting point) */
 858
 859         scope_info.scope.node = prefix_node;
 860
 861         /* Lookup the name in the namespace */
 862
 863         status = acpi_ns_lookup(&scope_info, internal_path, ACPI_TYPE_ANY,
 864                                 ACPI_IMODE_EXECUTE,
 865                                 (flags | ACPI_NS_DONT_OPEN_SCOPE), NULL,
 866                                 return_node);
 867         if (ACPI_FAILURE(status)) {
 868                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s, %s\n",
 869                                   pathname, acpi_format_exception(status)));
 870         }
 871
 872         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 873
 874       cleanup:
 875         ACPI_FREE(internal_path);
 876         return_ACPI_STATUS(status);
 877 }
 878
 879 /*******************************************************************************
 880  *
 881  * FUNCTION:    acpi_ns_get_parent_node
 882  *
 883  * PARAMETERS:  Node       - Current table entry
 884  *
 885  * RETURN:      Parent entry of the given entry
 886  *
 887  * DESCRIPTION: Obtain the parent entry for a given entry in the namespace.
 888  *
 889  ******************************************************************************/
 890
 891 struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node
 892                                                     *node)
 893 {
 894         ACPI_FUNCTION_ENTRY();
 895
 896         if (!node) {
 897                 return (NULL);
 898         }
 899
 900         /*
 901          * Walk to the end of this peer list. The last entry is marked with a flag
 902          * and the peer pointer is really a pointer back to the parent. This saves
 903          * putting a parent back pointer in each and every named object!
 904          */
 905         while (!(node->flags & ANOBJ_END_OF_PEER_LIST)) {
 906                 node = node->peer;
 907         }
 908
 909         return (node->peer);
 910 }
 911
 912 /*******************************************************************************
 913  *
 914  * FUNCTION:    acpi_ns_get_next_valid_node
 915  *
 916  * PARAMETERS:  Node       - Current table entry
 917  *
 918  * RETURN:      Next valid Node in the linked node list. NULL if no more valid
 919  *              nodes.
 920  *
 921  * DESCRIPTION: Find the next valid node within a name table.
 922  *              Useful for implementing NULL-end-of-list loops.
 923  *
 924  ******************************************************************************/
 925
 926 struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct
 927                                                         acpi_namespace_node
 928                                                         *node)
 929 {
 930
 931         /* If we are at the end of this peer list, return NULL */
 932
 933         if (node->flags & ANOBJ_END_OF_PEER_LIST) {
 934                 return NULL;
 935         }
 936
 937         /* Otherwise just return the next peer */
 938
 939         return (node->peer);
 940 }
 941
 942 #ifdef ACPI_OBSOLETE_FUNCTIONS
 943 /*******************************************************************************
 944  *
 945  * FUNCTION:    acpi_ns_find_parent_name
 946  *
 947  * PARAMETERS:  *child_node            - Named Obj whose name is to be found
 948  *
 949  * RETURN:      The ACPI name
 950  *
 951  * DESCRIPTION: Search for the given obj in its parent scope and return the
 952  *              name segment, or "????" if the parent name can't be found
 953  *              (which "should not happen").
 954  *
 955  ******************************************************************************/
 956
 957 acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node * child_node)
 958 {
 959         struct acpi_namespace_node *parent_node;
 960
 961         ACPI_FUNCTION_TRACE(ns_find_parent_name);
 962
 963         if (child_node) {
 964
 965                 /* Valid entry.  Get the parent Node */
 966
 967                 parent_node = acpi_ns_get_parent_node(child_node);
 968                 if (parent_node) {
 969                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 970                                           "Parent of %p [%4.4s] is %p [%4.4s]\n",
 971                                           child_node,
 972                                           acpi_ut_get_node_name(child_node),
 973                                           parent_node,
 974                                           acpi_ut_get_node_name(parent_node)));
 975
 976                         if (parent_node->name.integer) {
 977                                 return_VALUE((acpi_name) parent_node->name.
 978                                              integer);
 979                         }
 980                 }
 981
 982                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 983                                   "Unable to find parent of %p (%4.4s)\n",
 984                                   child_node,
 985                                   acpi_ut_get_node_name(child_node)));
 986         }
 987
 988         return_VALUE(ACPI_UNKNOWN_NAME);
 989 }
 990 #endif