err.no Git - linux-2.6/blob - drivers/acpi/hardware/hwsleep.c

   1
   2 /******************************************************************************
   3  *
   4  * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2007, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/actables.h>
  47
  48 #define _COMPONENT          ACPI_HARDWARE
  49 ACPI_MODULE_NAME("hwsleep")
  50
  51 /*******************************************************************************
  52  *
  53  * FUNCTION:    acpi_set_firmware_waking_vector
  54  *
  55  * PARAMETERS:  physical_address    - Physical address of ACPI real mode
  56  *                                    entry point.
  57  *
  58  * RETURN:      Status
  59  *
  60  * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
  61  *
  62  ******************************************************************************/
  63 acpi_status
  64 acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
  65 {
  66         struct acpi_table_facs *facs;
  67         acpi_status status;
  68
  69         ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
  70
  71         /* Get the FACS */
  72
  73         status =
  74             acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
  75                                     (struct acpi_table_header **)&facs);
  76         if (ACPI_FAILURE(status)) {
  77                 return_ACPI_STATUS(status);
  78         }
  79
  80         /* Set the vector */
  81
  82         if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
  83                 /*
  84                  * ACPI 1.0 FACS or short table or optional X_ field is zero
  85                  */
  86                 facs->firmware_waking_vector = (u32) physical_address;
  87         } else {
  88                 /*
  89                  * ACPI 2.0 FACS with valid X_ field
  90                  */
  91                 facs->xfirmware_waking_vector = physical_address;
  92         }
  93
  94         return_ACPI_STATUS(AE_OK);
  95 }
  96
  97 ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
  98
  99 /*******************************************************************************
 100  *
 101  * FUNCTION:    acpi_get_firmware_waking_vector
 102  *
 103  * PARAMETERS:  *physical_address   - Where the contents of
 104  *                                    the firmware_waking_vector field of
 105  *                                    the FACS will be returned.
 106  *
 107  * RETURN:      Status, vector
 108  *
 109  * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
 110  *
 111  ******************************************************************************/
 112 #ifdef ACPI_FUTURE_USAGE
 113 acpi_status
 114 acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
 115 {
 116         struct acpi_table_facs *facs;
 117         acpi_status status;
 118
 119         ACPI_FUNCTION_TRACE(acpi_get_firmware_waking_vector);
 120
 121         if (!physical_address) {
 122                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 123         }
 124
 125         /* Get the FACS */
 126
 127         status =
 128             acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
 129                                     (struct acpi_table_header **)&facs);
 130         if (ACPI_FAILURE(status)) {
 131                 return_ACPI_STATUS(status);
 132         }
 133
 134         /* Get the vector */
 135
 136         if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
 137                 /*
 138                  * ACPI 1.0 FACS or short table or optional X_ field is zero
 139                  */
 140                 *physical_address =
 141                     (acpi_physical_address) facs->firmware_waking_vector;
 142         } else {
 143                 /*
 144                  * ACPI 2.0 FACS with valid X_ field
 145                  */
 146                 *physical_address =
 147                     (acpi_physical_address) facs->xfirmware_waking_vector;
 148         }
 149
 150         return_ACPI_STATUS(AE_OK);
 151 }
 152
 153 ACPI_EXPORT_SYMBOL(acpi_get_firmware_waking_vector)
 154 #endif
 155 /*******************************************************************************
 156  *
 157  * FUNCTION:    acpi_enter_sleep_state_prep
 158  *
 159  * PARAMETERS:  sleep_state         - Which sleep state to enter
 160  *
 161  * RETURN:      Status
 162  *
 163  * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
 164  *              This function must execute with interrupts enabled.
 165  *              We break sleeping into 2 stages so that OSPM can handle
 166  *              various OS-specific tasks between the two steps.
 167  *
 168  ******************************************************************************/
 169 acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
 170 {
 171         acpi_status status;
 172         struct acpi_object_list arg_list;
 173         union acpi_object arg;
 174
 175         ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
 176
 177         /*
 178          * _PSW methods could be run here to enable wake-on keyboard, LAN, etc.
 179          */
 180         status = acpi_get_sleep_type_data(sleep_state,
 181                                           &acpi_gbl_sleep_type_a,
 182                                           &acpi_gbl_sleep_type_b);
 183         if (ACPI_FAILURE(status)) {
 184                 return_ACPI_STATUS(status);
 185         }
 186
 187         /* Setup parameter object */
 188
 189         arg_list.count = 1;
 190         arg_list.pointer = &arg;
 191
 192         arg.type = ACPI_TYPE_INTEGER;
 193         arg.integer.value = sleep_state;
 194
 195         /* Run the _PTS and _GTS methods */
 196
 197         status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
 198         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 199                 return_ACPI_STATUS(status);
 200         }
 201
 202         status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
 203         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 204                 return_ACPI_STATUS(status);
 205         }
 206
 207         /* Setup the argument to _SST */
 208
 209         switch (sleep_state) {
 210         case ACPI_STATE_S0:
 211                 arg.integer.value = ACPI_SST_WORKING;
 212                 break;
 213
 214         case ACPI_STATE_S1:
 215         case ACPI_STATE_S2:
 216         case ACPI_STATE_S3:
 217                 arg.integer.value = ACPI_SST_SLEEPING;
 218                 break;
 219
 220         case ACPI_STATE_S4:
 221                 arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
 222                 break;
 223
 224         default:
 225                 arg.integer.value = ACPI_SST_INDICATOR_OFF;     /* Default is off */
 226                 break;
 227         }
 228
 229         /* Set the system indicators to show the desired sleep state. */
 230
 231         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 232         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 233                 ACPI_EXCEPTION((AE_INFO, status,
 234                                 "While executing method _SST"));
 235         }
 236
 237         /*
 238          * 1) Disable/Clear all GPEs
 239          */
 240         status = acpi_hw_disable_all_gpes();
 241         if (ACPI_FAILURE(status)) {
 242                 return_ACPI_STATUS(status);
 243         }
 244
 245         return_ACPI_STATUS(AE_OK);
 246 }
 247
 248 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
 249
 250 /*******************************************************************************
 251  *
 252  * FUNCTION:    acpi_enter_sleep_state
 253  *
 254  * PARAMETERS:  sleep_state         - Which sleep state to enter
 255  *
 256  * RETURN:      Status
 257  *
 258  * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
 259  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 260  *
 261  ******************************************************************************/
 262 acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 263 {
 264         u32 PM1Acontrol;
 265         u32 PM1Bcontrol;
 266         struct acpi_bit_register_info *sleep_type_reg_info;
 267         struct acpi_bit_register_info *sleep_enable_reg_info;
 268         u32 in_value;
 269         acpi_status status;
 270
 271         ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
 272
 273         if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
 274             (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
 275                 ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
 276                             acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
 277                 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 278         }
 279
 280         sleep_type_reg_info =
 281             acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
 282         sleep_enable_reg_info =
 283             acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
 284
 285         /* Clear wake status */
 286
 287         status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
 288         if (ACPI_FAILURE(status)) {
 289                 return_ACPI_STATUS(status);
 290         }
 291
 292         /* Clear all fixed and general purpose status bits */
 293
 294         status = acpi_hw_clear_acpi_status();
 295         if (ACPI_FAILURE(status)) {
 296                 return_ACPI_STATUS(status);
 297         }
 298
 299         /*
 300          * 2) Enable all wakeup GPEs
 301          */
 302         status = acpi_hw_disable_all_gpes();
 303         if (ACPI_FAILURE(status)) {
 304                 return_ACPI_STATUS(status);
 305         }
 306
 307         acpi_gbl_system_awake_and_running = FALSE;
 308
 309         status = acpi_hw_enable_all_wakeup_gpes();
 310         if (ACPI_FAILURE(status)) {
 311                 return_ACPI_STATUS(status);
 312         }
 313
 314         /* Get current value of PM1A control */
 315
 316         status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
 317         if (ACPI_FAILURE(status)) {
 318                 return_ACPI_STATUS(status);
 319         }
 320         ACPI_DEBUG_PRINT((ACPI_DB_INIT,
 321                           "Entering sleep state [S%d]\n", sleep_state));
 322
 323         /* Clear SLP_EN and SLP_TYP fields */
 324
 325         PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
 326                          sleep_enable_reg_info->access_bit_mask);
 327         PM1Bcontrol = PM1Acontrol;
 328
 329         /* Insert SLP_TYP bits */
 330
 331         PM1Acontrol |=
 332             (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
 333         PM1Bcontrol |=
 334             (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);
 335
 336         /*
 337          * We split the writes of SLP_TYP and SLP_EN to workaround
 338          * poorly implemented hardware.
 339          */
 340
 341         /* Write #1: fill in SLP_TYP data */
 342
 343         status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
 344                                         PM1Acontrol);
 345         if (ACPI_FAILURE(status)) {
 346                 return_ACPI_STATUS(status);
 347         }
 348
 349         status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
 350                                         PM1Bcontrol);
 351         if (ACPI_FAILURE(status)) {
 352                 return_ACPI_STATUS(status);
 353         }
 354
 355         /* Insert SLP_ENABLE bit */
 356
 357         PM1Acontrol |= sleep_enable_reg_info->access_bit_mask;
 358         PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask;
 359
 360         /* Write #2: SLP_TYP + SLP_EN */
 361
 362         ACPI_FLUSH_CPU_CACHE();
 363
 364         status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
 365                                         PM1Acontrol);
 366         if (ACPI_FAILURE(status)) {
 367                 return_ACPI_STATUS(status);
 368         }
 369
 370         status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
 371                                         PM1Bcontrol);
 372         if (ACPI_FAILURE(status)) {
 373                 return_ACPI_STATUS(status);
 374         }
 375
 376         if (sleep_state > ACPI_STATE_S3) {
 377                 /*
 378                  * We wanted to sleep > S3, but it didn't happen (by virtue of the
 379                  * fact that we are still executing!)
 380                  *
 381                  * Wait ten seconds, then try again. This is to get S4/S5 to work on
 382                  * all machines.
 383                  *
 384                  * We wait so long to allow chipsets that poll this reg very slowly to
 385                  * still read the right value. Ideally, this block would go
 386                  * away entirely.
 387                  */
 388                 acpi_os_stall(10000000);
 389
 390                 status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL,
 391                                                 sleep_enable_reg_info->
 392                                                 access_bit_mask);
 393                 if (ACPI_FAILURE(status)) {
 394                         return_ACPI_STATUS(status);
 395                 }
 396         }
 397
 398         /* Wait until we enter sleep state */
 399
 400         do {
 401                 status = acpi_get_register_unlocked(ACPI_BITREG_WAKE_STATUS,
 402                                                     &in_value);
 403                 if (ACPI_FAILURE(status)) {
 404                         return_ACPI_STATUS(status);
 405                 }
 406
 407                 /* Spin until we wake */
 408
 409         } while (!in_value);
 410
 411         return_ACPI_STATUS(AE_OK);
 412 }
 413
 414 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
 415
 416 /*******************************************************************************
 417  *
 418  * FUNCTION:    acpi_enter_sleep_state_s4bios
 419  *
 420  * PARAMETERS:  None
 421  *
 422  * RETURN:      Status
 423  *
 424  * DESCRIPTION: Perform a S4 bios request.
 425  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 426  *
 427  ******************************************************************************/
 428 acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
 429 {
 430         u32 in_value;
 431         acpi_status status;
 432
 433         ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
 434
 435         status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
 436         if (ACPI_FAILURE(status)) {
 437                 return_ACPI_STATUS(status);
 438         }
 439
 440         status = acpi_hw_clear_acpi_status();
 441         if (ACPI_FAILURE(status)) {
 442                 return_ACPI_STATUS(status);
 443         }
 444
 445         /*
 446          * 1) Disable/Clear all GPEs
 447          * 2) Enable all wakeup GPEs
 448          */
 449         status = acpi_hw_disable_all_gpes();
 450         if (ACPI_FAILURE(status)) {
 451                 return_ACPI_STATUS(status);
 452         }
 453         acpi_gbl_system_awake_and_running = FALSE;
 454
 455         status = acpi_hw_enable_all_wakeup_gpes();
 456         if (ACPI_FAILURE(status)) {
 457                 return_ACPI_STATUS(status);
 458         }
 459
 460         ACPI_FLUSH_CPU_CACHE();
 461
 462         status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
 463                                     (u32) acpi_gbl_FADT.S4bios_request, 8);
 464
 465         do {
 466                 acpi_os_stall(1000);
 467                 status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value);
 468                 if (ACPI_FAILURE(status)) {
 469                         return_ACPI_STATUS(status);
 470                 }
 471         } while (!in_value);
 472
 473         return_ACPI_STATUS(AE_OK);
 474 }
 475
 476 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
 477
 478 /*******************************************************************************
 479  *
 480  * FUNCTION:    acpi_leave_sleep_state
 481  *
 482  * PARAMETERS:  sleep_state         - Which sleep state we just exited
 483  *
 484  * RETURN:      Status
 485  *
 486  * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
 487  *              Called with interrupts ENABLED.
 488  *
 489  ******************************************************************************/
 490 acpi_status acpi_leave_sleep_state(u8 sleep_state)
 491 {
 492         struct acpi_object_list arg_list;
 493         union acpi_object arg;
 494         acpi_status status;
 495         struct acpi_bit_register_info *sleep_type_reg_info;
 496         struct acpi_bit_register_info *sleep_enable_reg_info;
 497         u32 PM1Acontrol;
 498         u32 PM1Bcontrol;
 499
 500         ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
 501
 502         /*
 503          * Set SLP_TYPE and SLP_EN to state S0.
 504          * This is unclear from the ACPI Spec, but it is required
 505          * by some machines.
 506          */
 507         status = acpi_get_sleep_type_data(ACPI_STATE_S0,
 508                                           &acpi_gbl_sleep_type_a,
 509                                           &acpi_gbl_sleep_type_b);
 510         if (ACPI_SUCCESS(status)) {
 511                 sleep_type_reg_info =
 512                     acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
 513                 sleep_enable_reg_info =
 514                     acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
 515
 516                 /* Get current value of PM1A control */
 517
 518                 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
 519                                                &PM1Acontrol);
 520                 if (ACPI_SUCCESS(status)) {
 521
 522                         /* Clear SLP_EN and SLP_TYP fields */
 523
 524                         PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
 525                                          sleep_enable_reg_info->
 526                                          access_bit_mask);
 527                         PM1Bcontrol = PM1Acontrol;
 528
 529                         /* Insert SLP_TYP bits */
 530
 531                         PM1Acontrol |=
 532                             (acpi_gbl_sleep_type_a << sleep_type_reg_info->
 533                              bit_position);
 534                         PM1Bcontrol |=
 535                             (acpi_gbl_sleep_type_b << sleep_type_reg_info->
 536                              bit_position);
 537
 538                         /* Just ignore any errors */
 539
 540                         (void)acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
 541                                                      PM1Acontrol);
 542                         (void)acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
 543                                                      PM1Bcontrol);
 544                 }
 545         }
 546
 547         /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
 548
 549         acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
 550
 551         /* Setup parameter object */
 552
 553         arg_list.count = 1;
 554         arg_list.pointer = &arg;
 555         arg.type = ACPI_TYPE_INTEGER;
 556
 557         /* Ignore any errors from these methods */
 558
 559         arg.integer.value = ACPI_SST_WAKING;
 560         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 561         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 562                 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 563         }
 564
 565         arg.integer.value = sleep_state;
 566         status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
 567         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 568                 ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
 569         }
 570
 571         /*
 572          * GPEs must be enabled before _WAK is called as GPEs
 573          * might get fired there
 574          *
 575          * Restore the GPEs:
 576          * 1) Disable/Clear all GPEs
 577          * 2) Enable all runtime GPEs
 578          */
 579         status = acpi_hw_disable_all_gpes();
 580         if (ACPI_FAILURE(status)) {
 581                 return_ACPI_STATUS(status);
 582         }
 583         status = acpi_hw_enable_all_runtime_gpes();
 584         if (ACPI_FAILURE(status)) {
 585                 return_ACPI_STATUS(status);
 586         }
 587
 588         status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
 589         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 590                 ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
 591         }
 592         /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 593
 594         acpi_gbl_system_awake_and_running = TRUE;
 595
 596         /* Enable power button */
 597
 598         (void)
 599             acpi_set_register(acpi_gbl_fixed_event_info
 600                               [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1);
 601
 602         (void)
 603             acpi_set_register(acpi_gbl_fixed_event_info
 604                               [ACPI_EVENT_POWER_BUTTON].status_register_id, 1);
 605
 606         arg.integer.value = ACPI_SST_WORKING;
 607         status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
 608         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 609                 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
 610         }
 611
 612         return_ACPI_STATUS(status);
 613 }
 614
 615 ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)