err.no Git - linux-2.6/blob - drivers/acpi/dispatcher/dsopcode.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsopcode - Dispatcher Op Region support and handling of
   4  *                         "control" opcodes
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2007, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acparser.h>
  47 #include <acpi/amlcode.h>
  48 #include <acpi/acdispat.h>
  49 #include <acpi/acinterp.h>
  50 #include <acpi/acnamesp.h>
  51 #include <acpi/acevents.h>
  52
  53 #define _COMPONENT          ACPI_DISPATCHER
  54 ACPI_MODULE_NAME("dsopcode")
  55
  56 /* Local prototypes */
  57 static acpi_status
  58 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  59                           struct acpi_namespace_node *scope_node,
  60                           u32 aml_length, u8 * aml_start);
  61
  62 static acpi_status
  63 acpi_ds_init_buffer_field(u16 aml_opcode,
  64                           union acpi_operand_object *obj_desc,
  65                           union acpi_operand_object *buffer_desc,
  66                           union acpi_operand_object *offset_desc,
  67                           union acpi_operand_object *length_desc,
  68                           union acpi_operand_object *result_desc);
  69
  70 /*******************************************************************************
  71  *
  72  * FUNCTION:    acpi_ds_execute_arguments
  73  *
  74  * PARAMETERS:  Node                - Object NS node
  75  *              scope_node          - Parent NS node
  76  *              aml_length          - Length of executable AML
  77  *              aml_start           - Pointer to the AML
  78  *
  79  * RETURN:      Status.
  80  *
  81  * DESCRIPTION: Late (deferred) execution of region or field arguments
  82  *
  83  ******************************************************************************/
  84
  85 static acpi_status
  86 acpi_ds_execute_arguments(struct acpi_namespace_node *node,
  87                           struct acpi_namespace_node *scope_node,
  88                           u32 aml_length, u8 * aml_start)
  89 {
  90         acpi_status status;
  91         union acpi_parse_object *op;
  92         struct acpi_walk_state *walk_state;
  93
  94         ACPI_FUNCTION_TRACE(ds_execute_arguments);
  95
  96         /*
  97          * Allocate a new parser op to be the root of the parsed tree
  98          */
  99         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 100         if (!op) {
 101                 return_ACPI_STATUS(AE_NO_MEMORY);
 102         }
 103
 104         /* Save the Node for use in acpi_ps_parse_aml */
 105
 106         op->common.node = scope_node;
 107
 108         /* Create and initialize a new parser state */
 109
 110         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 111         if (!walk_state) {
 112                 status = AE_NO_MEMORY;
 113                 goto cleanup;
 114         }
 115
 116         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 117                                        aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
 118         if (ACPI_FAILURE(status)) {
 119                 acpi_ds_delete_walk_state(walk_state);
 120                 goto cleanup;
 121         }
 122
 123         /* Mark this parse as a deferred opcode */
 124
 125         walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
 126         walk_state->deferred_node = node;
 127
 128         /* Pass1: Parse the entire declaration */
 129
 130         status = acpi_ps_parse_aml(walk_state);
 131         if (ACPI_FAILURE(status)) {
 132                 goto cleanup;
 133         }
 134
 135         /* Get and init the Op created above */
 136
 137         op->common.node = node;
 138         acpi_ps_delete_parse_tree(op);
 139
 140         /* Evaluate the deferred arguments */
 141
 142         op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
 143         if (!op) {
 144                 return_ACPI_STATUS(AE_NO_MEMORY);
 145         }
 146
 147         op->common.node = scope_node;
 148
 149         /* Create and initialize a new parser state */
 150
 151         walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
 152         if (!walk_state) {
 153                 status = AE_NO_MEMORY;
 154                 goto cleanup;
 155         }
 156
 157         /* Execute the opcode and arguments */
 158
 159         status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
 160                                        aml_length, NULL, ACPI_IMODE_EXECUTE);
 161         if (ACPI_FAILURE(status)) {
 162                 acpi_ds_delete_walk_state(walk_state);
 163                 goto cleanup;
 164         }
 165
 166         /* Mark this execution as a deferred opcode */
 167
 168         walk_state->deferred_node = node;
 169         status = acpi_ps_parse_aml(walk_state);
 170
 171       cleanup:
 172         acpi_ps_delete_parse_tree(op);
 173         return_ACPI_STATUS(status);
 174 }
 175
 176 /*******************************************************************************
 177  *
 178  * FUNCTION:    acpi_ds_get_buffer_field_arguments
 179  *
 180  * PARAMETERS:  obj_desc        - A valid buffer_field object
 181  *
 182  * RETURN:      Status.
 183  *
 184  * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
 185  *              evaluation of these field attributes.
 186  *
 187  ******************************************************************************/
 188
 189 acpi_status
 190 acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
 191 {
 192         union acpi_operand_object *extra_desc;
 193         struct acpi_namespace_node *node;
 194         acpi_status status;
 195
 196         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
 197
 198         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 199                 return_ACPI_STATUS(AE_OK);
 200         }
 201
 202         /* Get the AML pointer (method object) and buffer_field node */
 203
 204         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 205         node = obj_desc->buffer_field.node;
 206
 207         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 208                         (ACPI_TYPE_BUFFER_FIELD, node, NULL));
 209         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
 210                           acpi_ut_get_node_name(node)));
 211
 212         /* Execute the AML code for the term_arg arguments */
 213
 214         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 215                                            extra_desc->extra.aml_length,
 216                                            extra_desc->extra.aml_start);
 217         return_ACPI_STATUS(status);
 218 }
 219
 220 /*******************************************************************************
 221  *
 222  * FUNCTION:    acpi_ds_get_buffer_arguments
 223  *
 224  * PARAMETERS:  obj_desc        - A valid Buffer object
 225  *
 226  * RETURN:      Status.
 227  *
 228  * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
 229  *              the late evaluation of these attributes.
 230  *
 231  ******************************************************************************/
 232
 233 acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
 234 {
 235         struct acpi_namespace_node *node;
 236         acpi_status status;
 237
 238         ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
 239
 240         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 241                 return_ACPI_STATUS(AE_OK);
 242         }
 243
 244         /* Get the Buffer node */
 245
 246         node = obj_desc->buffer.node;
 247         if (!node) {
 248                 ACPI_ERROR((AE_INFO,
 249                             "No pointer back to NS node in buffer obj %p",
 250                             obj_desc));
 251                 return_ACPI_STATUS(AE_AML_INTERNAL);
 252         }
 253
 254         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
 255
 256         /* Execute the AML code for the term_arg arguments */
 257
 258         status = acpi_ds_execute_arguments(node, node,
 259                                            obj_desc->buffer.aml_length,
 260                                            obj_desc->buffer.aml_start);
 261         return_ACPI_STATUS(status);
 262 }
 263
 264 /*******************************************************************************
 265  *
 266  * FUNCTION:    acpi_ds_get_package_arguments
 267  *
 268  * PARAMETERS:  obj_desc        - A valid Package object
 269  *
 270  * RETURN:      Status.
 271  *
 272  * DESCRIPTION: Get Package length and initializer byte list.  This implements
 273  *              the late evaluation of these attributes.
 274  *
 275  ******************************************************************************/
 276
 277 acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
 278 {
 279         struct acpi_namespace_node *node;
 280         acpi_status status;
 281
 282         ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
 283
 284         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 285                 return_ACPI_STATUS(AE_OK);
 286         }
 287
 288         /* Get the Package node */
 289
 290         node = obj_desc->package.node;
 291         if (!node) {
 292                 ACPI_ERROR((AE_INFO,
 293                             "No pointer back to NS node in package %p",
 294                             obj_desc));
 295                 return_ACPI_STATUS(AE_AML_INTERNAL);
 296         }
 297
 298         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
 299
 300         /* Execute the AML code for the term_arg arguments */
 301
 302         status = acpi_ds_execute_arguments(node, node,
 303                                            obj_desc->package.aml_length,
 304                                            obj_desc->package.aml_start);
 305         return_ACPI_STATUS(status);
 306 }
 307
 308 /*****************************************************************************
 309  *
 310  * FUNCTION:    acpi_ds_get_region_arguments
 311  *
 312  * PARAMETERS:  obj_desc        - A valid region object
 313  *
 314  * RETURN:      Status.
 315  *
 316  * DESCRIPTION: Get region address and length.  This implements the late
 317  *              evaluation of these region attributes.
 318  *
 319  ****************************************************************************/
 320
 321 acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 322 {
 323         struct acpi_namespace_node *node;
 324         acpi_status status;
 325         union acpi_operand_object *extra_desc;
 326
 327         ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
 328
 329         if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
 330                 return_ACPI_STATUS(AE_OK);
 331         }
 332
 333         extra_desc = acpi_ns_get_secondary_object(obj_desc);
 334         if (!extra_desc) {
 335                 return_ACPI_STATUS(AE_NOT_EXIST);
 336         }
 337
 338         /* Get the Region node */
 339
 340         node = obj_desc->region.node;
 341
 342         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 343                         (ACPI_TYPE_REGION, node, NULL));
 344
 345         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
 346                           acpi_ut_get_node_name(node),
 347                           extra_desc->extra.aml_start));
 348
 349         /* Execute the argument AML */
 350
 351         status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 352                                            extra_desc->extra.aml_length,
 353                                            extra_desc->extra.aml_start);
 354         if (ACPI_FAILURE(status)) {
 355                 return_ACPI_STATUS(status);
 356         }
 357
 358         /* Validate the region address/length via the host OS */
 359
 360         status = acpi_os_validate_address(obj_desc->region.space_id,
 361                                           obj_desc->region.address,
 362                                           (acpi_size) obj_desc->region.length,
 363                                           acpi_ut_get_node_name(node));
 364
 365         if (ACPI_FAILURE(status)) {
 366                 /*
 367                  * Invalid address/length. We will emit an error message and mark
 368                  * the region as invalid, so that it will cause an additional error if
 369                  * it is ever used. Then return AE_OK.
 370                  */
 371                 ACPI_EXCEPTION((AE_INFO, status,
 372                                 "During address validation of OpRegion [%4.4s]",
 373                                 node->name.ascii));
 374                 obj_desc->common.flags |= AOPOBJ_INVALID;
 375                 status = AE_OK;
 376         }
 377
 378         return_ACPI_STATUS(status);
 379 }
 380
 381 /*******************************************************************************
 382  *
 383  * FUNCTION:    acpi_ds_initialize_region
 384  *
 385  * PARAMETERS:  obj_handle      - Region namespace node
 386  *
 387  * RETURN:      Status
 388  *
 389  * DESCRIPTION: Front end to ev_initialize_region
 390  *
 391  ******************************************************************************/
 392
 393 acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
 394 {
 395         union acpi_operand_object *obj_desc;
 396         acpi_status status;
 397
 398         obj_desc = acpi_ns_get_attached_object(obj_handle);
 399
 400         /* Namespace is NOT locked */
 401
 402         status = acpi_ev_initialize_region(obj_desc, FALSE);
 403         return (status);
 404 }
 405
 406 /*******************************************************************************
 407  *
 408  * FUNCTION:    acpi_ds_init_buffer_field
 409  *
 410  * PARAMETERS:  aml_opcode      - create_xxx_field
 411  *              obj_desc        - buffer_field object
 412  *              buffer_desc     - Host Buffer
 413  *              offset_desc     - Offset into buffer
 414  *              length_desc     - Length of field (CREATE_FIELD_OP only)
 415  *              result_desc     - Where to store the result
 416  *
 417  * RETURN:      Status
 418  *
 419  * DESCRIPTION: Perform actual initialization of a buffer field
 420  *
 421  ******************************************************************************/
 422
 423 static acpi_status
 424 acpi_ds_init_buffer_field(u16 aml_opcode,
 425                           union acpi_operand_object *obj_desc,
 426                           union acpi_operand_object *buffer_desc,
 427                           union acpi_operand_object *offset_desc,
 428                           union acpi_operand_object *length_desc,
 429                           union acpi_operand_object *result_desc)
 430 {
 431         u32 offset;
 432         u32 bit_offset;
 433         u32 bit_count;
 434         u8 field_flags;
 435         acpi_status status;
 436
 437         ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
 438
 439         /* Host object must be a Buffer */
 440
 441         if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
 442                 ACPI_ERROR((AE_INFO,
 443                             "Target of Create Field is not a Buffer object - %s",
 444                             acpi_ut_get_object_type_name(buffer_desc)));
 445
 446                 status = AE_AML_OPERAND_TYPE;
 447                 goto cleanup;
 448         }
 449
 450         /*
 451          * The last parameter to all of these opcodes (result_desc) started
 452          * out as a name_string, and should therefore now be a NS node
 453          * after resolution in acpi_ex_resolve_operands().
 454          */
 455         if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
 456                 ACPI_ERROR((AE_INFO,
 457                             "(%s) destination not a NS Node [%s]",
 458                             acpi_ps_get_opcode_name(aml_opcode),
 459                             acpi_ut_get_descriptor_name(result_desc)));
 460
 461                 status = AE_AML_OPERAND_TYPE;
 462                 goto cleanup;
 463         }
 464
 465         offset = (u32) offset_desc->integer.value;
 466
 467         /*
 468          * Setup the Bit offsets and counts, according to the opcode
 469          */
 470         switch (aml_opcode) {
 471         case AML_CREATE_FIELD_OP:
 472
 473                 /* Offset is in bits, count is in bits */
 474
 475                 field_flags = AML_FIELD_ACCESS_BYTE;
 476                 bit_offset = offset;
 477                 bit_count = (u32) length_desc->integer.value;
 478
 479                 /* Must have a valid (>0) bit count */
 480
 481                 if (bit_count == 0) {
 482                         ACPI_ERROR((AE_INFO,
 483                                     "Attempt to CreateField of length zero"));
 484                         status = AE_AML_OPERAND_VALUE;
 485                         goto cleanup;
 486                 }
 487                 break;
 488
 489         case AML_CREATE_BIT_FIELD_OP:
 490
 491                 /* Offset is in bits, Field is one bit */
 492
 493                 bit_offset = offset;
 494                 bit_count = 1;
 495                 field_flags = AML_FIELD_ACCESS_BYTE;
 496                 break;
 497
 498         case AML_CREATE_BYTE_FIELD_OP:
 499
 500                 /* Offset is in bytes, field is one byte */
 501
 502                 bit_offset = 8 * offset;
 503                 bit_count = 8;
 504                 field_flags = AML_FIELD_ACCESS_BYTE;
 505                 break;
 506
 507         case AML_CREATE_WORD_FIELD_OP:
 508
 509                 /* Offset is in bytes, field is one word */
 510
 511                 bit_offset = 8 * offset;
 512                 bit_count = 16;
 513                 field_flags = AML_FIELD_ACCESS_WORD;
 514                 break;
 515
 516         case AML_CREATE_DWORD_FIELD_OP:
 517
 518                 /* Offset is in bytes, field is one dword */
 519
 520                 bit_offset = 8 * offset;
 521                 bit_count = 32;
 522                 field_flags = AML_FIELD_ACCESS_DWORD;
 523                 break;
 524
 525         case AML_CREATE_QWORD_FIELD_OP:
 526
 527                 /* Offset is in bytes, field is one qword */
 528
 529                 bit_offset = 8 * offset;
 530                 bit_count = 64;
 531                 field_flags = AML_FIELD_ACCESS_QWORD;
 532                 break;
 533
 534         default:
 535
 536                 ACPI_ERROR((AE_INFO,
 537                             "Unknown field creation opcode %02x", aml_opcode));
 538                 status = AE_AML_BAD_OPCODE;
 539                 goto cleanup;
 540         }
 541
 542         /* Entire field must fit within the current length of the buffer */
 543
 544         if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
 545                 ACPI_ERROR((AE_INFO,
 546                             "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
 547                             acpi_ut_get_node_name(result_desc),
 548                             bit_offset + bit_count,
 549                             acpi_ut_get_node_name(buffer_desc->buffer.node),
 550                             8 * (u32) buffer_desc->buffer.length));
 551                 status = AE_AML_BUFFER_LIMIT;
 552                 goto cleanup;
 553         }
 554
 555         /*
 556          * Initialize areas of the field object that are common to all fields
 557          * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
 558          * UPDATE_RULE = 0 (UPDATE_PRESERVE)
 559          */
 560         status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
 561                                                   bit_offset, bit_count);
 562         if (ACPI_FAILURE(status)) {
 563                 goto cleanup;
 564         }
 565
 566         obj_desc->buffer_field.buffer_obj = buffer_desc;
 567
 568         /* Reference count for buffer_desc inherits obj_desc count */
 569
 570         buffer_desc->common.reference_count = (u16)
 571             (buffer_desc->common.reference_count +
 572              obj_desc->common.reference_count);
 573
 574       cleanup:
 575
 576         /* Always delete the operands */
 577
 578         acpi_ut_remove_reference(offset_desc);
 579         acpi_ut_remove_reference(buffer_desc);
 580
 581         if (aml_opcode == AML_CREATE_FIELD_OP) {
 582                 acpi_ut_remove_reference(length_desc);
 583         }
 584
 585         /* On failure, delete the result descriptor */
 586
 587         if (ACPI_FAILURE(status)) {
 588                 acpi_ut_remove_reference(result_desc);  /* Result descriptor */
 589         } else {
 590                 /* Now the address and length are valid for this buffer_field */
 591
 592                 obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
 593         }
 594
 595         return_ACPI_STATUS(status);
 596 }
 597
 598 /*******************************************************************************
 599  *
 600  * FUNCTION:    acpi_ds_eval_buffer_field_operands
 601  *
 602  * PARAMETERS:  walk_state      - Current walk
 603  *              Op              - A valid buffer_field Op object
 604  *
 605  * RETURN:      Status
 606  *
 607  * DESCRIPTION: Get buffer_field Buffer and Index
 608  *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
 609  *
 610  ******************************************************************************/
 611
 612 acpi_status
 613 acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 614                                    union acpi_parse_object *op)
 615 {
 616         acpi_status status;
 617         union acpi_operand_object *obj_desc;
 618         struct acpi_namespace_node *node;
 619         union acpi_parse_object *next_op;
 620
 621         ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
 622
 623         /*
 624          * This is where we evaluate the address and length fields of the
 625          * create_xxx_field declaration
 626          */
 627         node = op->common.node;
 628
 629         /* next_op points to the op that holds the Buffer */
 630
 631         next_op = op->common.value.arg;
 632
 633         /* Evaluate/create the address and length operands */
 634
 635         status = acpi_ds_create_operands(walk_state, next_op);
 636         if (ACPI_FAILURE(status)) {
 637                 return_ACPI_STATUS(status);
 638         }
 639
 640         obj_desc = acpi_ns_get_attached_object(node);
 641         if (!obj_desc) {
 642                 return_ACPI_STATUS(AE_NOT_EXIST);
 643         }
 644
 645         /* Resolve the operands */
 646
 647         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 648                                           ACPI_WALK_OPERANDS, walk_state);
 649
 650         ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
 651                            acpi_ps_get_opcode_name(op->common.aml_opcode),
 652                            walk_state->num_operands,
 653                            "after AcpiExResolveOperands");
 654
 655         if (ACPI_FAILURE(status)) {
 656                 ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
 657                             acpi_ps_get_opcode_name(op->common.aml_opcode),
 658                             status));
 659
 660                 return_ACPI_STATUS(status);
 661         }
 662
 663         /* Initialize the Buffer Field */
 664
 665         if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
 666
 667                 /* NOTE: Slightly different operands for this opcode */
 668
 669                 status =
 670                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 671                                               walk_state->operands[0],
 672                                               walk_state->operands[1],
 673                                               walk_state->operands[2],
 674                                               walk_state->operands[3]);
 675         } else {
 676                 /* All other, create_xxx_field opcodes */
 677
 678                 status =
 679                     acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
 680                                               walk_state->operands[0],
 681                                               walk_state->operands[1], NULL,
 682                                               walk_state->operands[2]);
 683         }
 684
 685         return_ACPI_STATUS(status);
 686 }
 687
 688 /*******************************************************************************
 689  *
 690  * FUNCTION:    acpi_ds_eval_region_operands
 691  *
 692  * PARAMETERS:  walk_state      - Current walk
 693  *              Op              - A valid region Op object
 694  *
 695  * RETURN:      Status
 696  *
 697  * DESCRIPTION: Get region address and length
 698  *              Called from acpi_ds_exec_end_op during op_region parse tree walk
 699  *
 700  ******************************************************************************/
 701
 702 acpi_status
 703 acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
 704                              union acpi_parse_object *op)
 705 {
 706         acpi_status status;
 707         union acpi_operand_object *obj_desc;
 708         union acpi_operand_object *operand_desc;
 709         struct acpi_namespace_node *node;
 710         union acpi_parse_object *next_op;
 711
 712         ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
 713
 714         /*
 715          * This is where we evaluate the address and length fields of the
 716          * op_region declaration
 717          */
 718         node = op->common.node;
 719
 720         /* next_op points to the op that holds the space_iD */
 721
 722         next_op = op->common.value.arg;
 723
 724         /* next_op points to address op */
 725
 726         next_op = next_op->common.next;
 727
 728         /* Evaluate/create the address and length operands */
 729
 730         status = acpi_ds_create_operands(walk_state, next_op);
 731         if (ACPI_FAILURE(status)) {
 732                 return_ACPI_STATUS(status);
 733         }
 734
 735         /* Resolve the length and address operands to numbers */
 736
 737         status = acpi_ex_resolve_operands(op->common.aml_opcode,
 738                                           ACPI_WALK_OPERANDS, walk_state);
 739         if (ACPI_FAILURE(status)) {
 740                 return_ACPI_STATUS(status);
 741         }
 742
 743         ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
 744                            acpi_ps_get_opcode_name(op->common.aml_opcode),
 745                            1, "after AcpiExResolveOperands");
 746
 747         obj_desc = acpi_ns_get_attached_object(node);
 748         if (!obj_desc) {
 749                 return_ACPI_STATUS(AE_NOT_EXIST);
 750         }
 751
 752         /*
 753          * Get the length operand and save it
 754          * (at Top of stack)
 755          */
 756         operand_desc = walk_state->operands[walk_state->num_operands - 1];
 757
 758         obj_desc->region.length = (u32) operand_desc->integer.value;
 759         acpi_ut_remove_reference(operand_desc);
 760
 761         /*
 762          * Get the address and save it
 763          * (at top of stack - 1)
 764          */
 765         operand_desc = walk_state->operands[walk_state->num_operands - 2];
 766
 767         obj_desc->region.address = (acpi_physical_address)
 768             operand_desc->integer.value;
 769         acpi_ut_remove_reference(operand_desc);
 770
 771         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 772                           obj_desc,
 773                           ACPI_FORMAT_UINT64(obj_desc->region.address),
 774                           obj_desc->region.length));
 775
 776         /* Now the address and length are valid for this opregion */
 777
 778         obj_desc->region.flags |= AOPOBJ_DATA_VALID;
 779
 780         return_ACPI_STATUS(status);
 781 }
 782
 783 /*******************************************************************************
 784  *
 785  * FUNCTION:    acpi_ds_eval_data_object_operands
 786  *
 787  * PARAMETERS:  walk_state      - Current walk
 788  *              Op              - A valid data_object Op object
 789  *              obj_desc        - data_object
 790  *
 791  * RETURN:      Status
 792  *
 793  * DESCRIPTION: Get the operands and complete the following data object types:
 794  *              Buffer, Package.
 795  *
 796  ******************************************************************************/
 797
 798 acpi_status
 799 acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
 800                                   union acpi_parse_object *op,
 801                                   union acpi_operand_object *obj_desc)
 802 {
 803         acpi_status status;
 804         union acpi_operand_object *arg_desc;
 805         u32 length;
 806
 807         ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
 808
 809         /* The first operand (for all of these data objects) is the length */
 810
 811         status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
 812         if (ACPI_FAILURE(status)) {
 813                 return_ACPI_STATUS(status);
 814         }
 815
 816         status = acpi_ex_resolve_operands(walk_state->opcode,
 817                                           &(walk_state->
 818                                             operands[walk_state->num_operands -
 819                                                      1]), walk_state);
 820         if (ACPI_FAILURE(status)) {
 821                 return_ACPI_STATUS(status);
 822         }
 823
 824         /* Extract length operand */
 825
 826         arg_desc = walk_state->operands[walk_state->num_operands - 1];
 827         length = (u32) arg_desc->integer.value;
 828
 829         /* Cleanup for length operand */
 830
 831         status = acpi_ds_obj_stack_pop(1, walk_state);
 832         if (ACPI_FAILURE(status)) {
 833                 return_ACPI_STATUS(status);
 834         }
 835
 836         acpi_ut_remove_reference(arg_desc);
 837
 838         /*
 839          * Create the actual data object
 840          */
 841         switch (op->common.aml_opcode) {
 842         case AML_BUFFER_OP:
 843
 844                 status =
 845                     acpi_ds_build_internal_buffer_obj(walk_state, op, length,
 846                                                       &obj_desc);
 847                 break;
 848
 849         case AML_PACKAGE_OP:
 850         case AML_VAR_PACKAGE_OP:
 851
 852                 status =
 853                     acpi_ds_build_internal_package_obj(walk_state, op, length,
 854                                                        &obj_desc);
 855                 break;
 856
 857         default:
 858                 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 859         }
 860
 861         if (ACPI_SUCCESS(status)) {
 862                 /*
 863                  * Return the object in the walk_state, unless the parent is a package -
 864                  * in this case, the return object will be stored in the parse tree
 865                  * for the package.
 866                  */
 867                 if ((!op->common.parent) ||
 868                     ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
 869                      (op->common.parent->common.aml_opcode !=
 870                       AML_VAR_PACKAGE_OP)
 871                      && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
 872                         walk_state->result_obj = obj_desc;
 873                 }
 874         }
 875
 876         return_ACPI_STATUS(status);
 877 }
 878
 879 /*******************************************************************************
 880  *
 881  * FUNCTION:    acpi_ds_exec_begin_control_op
 882  *
 883  * PARAMETERS:  walk_list       - The list that owns the walk stack
 884  *              Op              - The control Op
 885  *
 886  * RETURN:      Status
 887  *
 888  * DESCRIPTION: Handles all control ops encountered during control method
 889  *              execution.
 890  *
 891  ******************************************************************************/
 892
 893 acpi_status
 894 acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
 895                               union acpi_parse_object *op)
 896 {
 897         acpi_status status = AE_OK;
 898         union acpi_generic_state *control_state;
 899
 900         ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
 901
 902         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
 903                           op->common.aml_opcode, walk_state));
 904
 905         switch (op->common.aml_opcode) {
 906         case AML_IF_OP:
 907         case AML_WHILE_OP:
 908
 909                 /*
 910                  * IF/WHILE: Create a new control state to manage these
 911                  * constructs. We need to manage these as a stack, in order
 912                  * to handle nesting.
 913                  */
 914                 control_state = acpi_ut_create_control_state();
 915                 if (!control_state) {
 916                         status = AE_NO_MEMORY;
 917                         break;
 918                 }
 919                 /*
 920                  * Save a pointer to the predicate for multiple executions
 921                  * of a loop
 922                  */
 923                 control_state->control.aml_predicate_start =
 924                     walk_state->parser_state.aml - 1;
 925                 control_state->control.package_end =
 926                     walk_state->parser_state.pkg_end;
 927                 control_state->control.opcode = op->common.aml_opcode;
 928
 929                 /* Push the control state on this walk's control stack */
 930
 931                 acpi_ut_push_generic_state(&walk_state->control_state,
 932                                            control_state);
 933                 break;
 934
 935         case AML_ELSE_OP:
 936
 937                 /* Predicate is in the state object */
 938                 /* If predicate is true, the IF was executed, ignore ELSE part */
 939
 940                 if (walk_state->last_predicate) {
 941                         status = AE_CTRL_TRUE;
 942                 }
 943
 944                 break;
 945
 946         case AML_RETURN_OP:
 947
 948                 break;
 949
 950         default:
 951                 break;
 952         }
 953
 954         return (status);
 955 }
 956
 957 /*******************************************************************************
 958  *
 959  * FUNCTION:    acpi_ds_exec_end_control_op
 960  *
 961  * PARAMETERS:  walk_list       - The list that owns the walk stack
 962  *              Op              - The control Op
 963  *
 964  * RETURN:      Status
 965  *
 966  * DESCRIPTION: Handles all control ops encountered during control method
 967  *              execution.
 968  *
 969  ******************************************************************************/
 970
 971 acpi_status
 972 acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 973                             union acpi_parse_object * op)
 974 {
 975         acpi_status status = AE_OK;
 976         union acpi_generic_state *control_state;
 977
 978         ACPI_FUNCTION_NAME(ds_exec_end_control_op);
 979
 980         switch (op->common.aml_opcode) {
 981         case AML_IF_OP:
 982
 983                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
 984
 985                 /*
 986                  * Save the result of the predicate in case there is an
 987                  * ELSE to come
 988                  */
 989                 walk_state->last_predicate =
 990                     (u8) walk_state->control_state->common.value;
 991
 992                 /*
 993                  * Pop the control state that was created at the start
 994                  * of the IF and free it
 995                  */
 996                 control_state =
 997                     acpi_ut_pop_generic_state(&walk_state->control_state);
 998                 acpi_ut_delete_generic_state(control_state);
 999                 break;
1000
1001         case AML_ELSE_OP:
1002
1003                 break;
1004
1005         case AML_WHILE_OP:
1006
1007                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
1008
1009                 if (walk_state->control_state->common.value) {
1010
1011                         /* Predicate was true, go back and evaluate it again! */
1012
1013                         status = AE_CTRL_PENDING;
1014                 }
1015
1016                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1017                                   "[WHILE_OP] termination! Op=%p\n", op));
1018
1019                 /* Pop this control state and free it */
1020
1021                 control_state =
1022                     acpi_ut_pop_generic_state(&walk_state->control_state);
1023
1024                 walk_state->aml_last_while =
1025                     control_state->control.aml_predicate_start;
1026                 acpi_ut_delete_generic_state(control_state);
1027                 break;
1028
1029         case AML_RETURN_OP:
1030
1031                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1032                                   "[RETURN_OP] Op=%p Arg=%p\n", op,
1033                                   op->common.value.arg));
1034
1035                 /*
1036                  * One optional operand -- the return value
1037                  * It can be either an immediate operand or a result that
1038                  * has been bubbled up the tree
1039                  */
1040                 if (op->common.value.arg) {
1041
1042                         /* Since we have a real Return(), delete any implicit return */
1043
1044                         acpi_ds_clear_implicit_return(walk_state);
1045
1046                         /* Return statement has an immediate operand */
1047
1048                         status =
1049                             acpi_ds_create_operands(walk_state,
1050                                                     op->common.value.arg);
1051                         if (ACPI_FAILURE(status)) {
1052                                 return (status);
1053                         }
1054
1055                         /*
1056                          * If value being returned is a Reference (such as
1057                          * an arg or local), resolve it now because it may
1058                          * cease to exist at the end of the method.
1059                          */
1060                         status =
1061                             acpi_ex_resolve_to_value(&walk_state->operands[0],
1062                                                      walk_state);
1063                         if (ACPI_FAILURE(status)) {
1064                                 return (status);
1065                         }
1066
1067                         /*
1068                          * Get the return value and save as the last result
1069                          * value.  This is the only place where walk_state->return_desc
1070                          * is set to anything other than zero!
1071                          */
1072                         walk_state->return_desc = walk_state->operands[0];
1073                 } else if ((walk_state->results) &&
1074                            (walk_state->results->results.num_results > 0)) {
1075
1076                         /* Since we have a real Return(), delete any implicit return */
1077
1078                         acpi_ds_clear_implicit_return(walk_state);
1079
1080                         /*
1081                          * The return value has come from a previous calculation.
1082                          *
1083                          * If value being returned is a Reference (such as
1084                          * an arg or local), resolve it now because it may
1085                          * cease to exist at the end of the method.
1086                          *
1087                          * Allow references created by the Index operator to return unchanged.
1088                          */
1089                         if ((ACPI_GET_DESCRIPTOR_TYPE
1090                              (walk_state->results->results.obj_desc[0]) ==
1091                              ACPI_DESC_TYPE_OPERAND)
1092                             &&
1093                             (ACPI_GET_OBJECT_TYPE
1094                              (walk_state->results->results.obj_desc[0]) ==
1095                              ACPI_TYPE_LOCAL_REFERENCE)
1096                             && ((walk_state->results->results.obj_desc[0])->
1097                                 reference.opcode != AML_INDEX_OP)) {
1098                                 status =
1099                                     acpi_ex_resolve_to_value(&walk_state->
1100                                                              results->results.
1101                                                              obj_desc[0],
1102                                                              walk_state);
1103                                 if (ACPI_FAILURE(status)) {
1104                                         return (status);
1105                                 }
1106                         }
1107
1108                         walk_state->return_desc =
1109                             walk_state->results->results.obj_desc[0];
1110                 } else {
1111                         /* No return operand */
1112
1113                         if (walk_state->num_operands) {
1114                                 acpi_ut_remove_reference(walk_state->
1115                                                          operands[0]);
1116                         }
1117
1118                         walk_state->operands[0] = NULL;
1119                         walk_state->num_operands = 0;
1120                         walk_state->return_desc = NULL;
1121                 }
1122
1123                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
1124                                   "Completed RETURN_OP State=%p, RetVal=%p\n",
1125                                   walk_state, walk_state->return_desc));
1126
1127                 /* End the control method execution right now */
1128
1129                 status = AE_CTRL_TERMINATE;
1130                 break;
1131
1132         case AML_NOOP_OP:
1133
1134                 /* Just do nothing! */
1135                 break;
1136
1137         case AML_BREAK_POINT_OP:
1138
1139                 /* Call up to the OS service layer to handle this */
1140
1141                 status =
1142                     acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
1143                                    "Executed AML Breakpoint opcode");
1144
1145                 /* If and when it returns, all done. */
1146
1147                 break;
1148
1149         case AML_BREAK_OP:
1150         case AML_CONTINUE_OP:   /* ACPI 2.0 */
1151
1152                 /* Pop and delete control states until we find a while */
1153
1154                 while (walk_state->control_state &&
1155                        (walk_state->control_state->control.opcode !=
1156                         AML_WHILE_OP)) {
1157                         control_state =
1158                             acpi_ut_pop_generic_state(&walk_state->
1159                                                       control_state);
1160                         acpi_ut_delete_generic_state(control_state);
1161                 }
1162
1163                 /* No while found? */
1164
1165                 if (!walk_state->control_state) {
1166                         return (AE_AML_NO_WHILE);
1167                 }
1168
1169                 /* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
1170
1171                 walk_state->aml_last_while =
1172                     walk_state->control_state->control.package_end;
1173
1174                 /* Return status depending on opcode */
1175
1176                 if (op->common.aml_opcode == AML_BREAK_OP) {
1177                         status = AE_CTRL_BREAK;
1178                 } else {
1179                         status = AE_CTRL_CONTINUE;
1180                 }
1181                 break;
1182
1183         default:
1184
1185                 ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
1186                             op->common.aml_opcode, op));
1187
1188                 status = AE_AML_BAD_OPCODE;
1189                 break;
1190         }
1191
1192         return (status);
1193 }