err.no Git - linux-2.6/blob - drivers/acpi/dispatcher/dsmethod.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsmethod - Parser/Interpreter interface - control method parsing
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acparser.h>
  46 #include <acpi/amlcode.h>
  47 #include <acpi/acdispat.h>
  48 #include <acpi/acinterp.h>
  49 #include <acpi/acnamesp.h>
  50
  51 #define _COMPONENT          ACPI_DISPATCHER
  52 ACPI_MODULE_NAME("dsmethod")
  53
  54 /*******************************************************************************
  55  *
  56  * FUNCTION:    acpi_ds_parse_method
  57  *
  58  * PARAMETERS:  Node        - Method node
  59  *
  60  * RETURN:      Status
  61  *
  62  * DESCRIPTION: Parse the AML that is associated with the method.
  63  *
  64  * MUTEX:       Assumes parser is locked
  65  *
  66  ******************************************************************************/
  67 acpi_status acpi_ds_parse_method(struct acpi_namespace_node *node)
  68 {
  69         acpi_status status;
  70         union acpi_operand_object *obj_desc;
  71         union acpi_parse_object *op;
  72         struct acpi_walk_state *walk_state;
  73
  74         ACPI_FUNCTION_TRACE_PTR("ds_parse_method", node);
  75
  76         /* Parameter Validation */
  77
  78         if (!node) {
  79                 return_ACPI_STATUS(AE_NULL_ENTRY);
  80         }
  81
  82         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
  83                           "**** Parsing [%4.4s] **** named_obj=%p\n",
  84                           acpi_ut_get_node_name(node), node));
  85
  86         /* Extract the method object from the method Node */
  87
  88         obj_desc = acpi_ns_get_attached_object(node);
  89         if (!obj_desc) {
  90                 return_ACPI_STATUS(AE_NULL_OBJECT);
  91         }
  92
  93         /* Create a mutex for the method if there is a concurrency limit */
  94
  95         if ((obj_desc->method.concurrency != ACPI_INFINITE_CONCURRENCY) &&
  96             (!obj_desc->method.semaphore)) {
  97                 status = acpi_os_create_semaphore(obj_desc->method.concurrency,
  98                                                   obj_desc->method.concurrency,
  99                                                   &obj_desc->method.semaphore);
 100                 if (ACPI_FAILURE(status)) {
 101                         return_ACPI_STATUS(status);
 102                 }
 103         }
 104
 105         /*
 106          * Allocate a new parser op to be the root of the parsed
 107          * method tree
 108          */
 109         op = acpi_ps_alloc_op(AML_METHOD_OP);
 110         if (!op) {
 111                 return_ACPI_STATUS(AE_NO_MEMORY);
 112         }
 113
 114         /* Init new op with the method name and pointer back to the Node */
 115
 116         acpi_ps_set_name(op, node->name.integer);
 117         op->common.node = node;
 118
 119         /*
 120          * Get a new owner_id for objects created by this method. Namespace
 121          * objects (such as Operation Regions) can be created during the
 122          * first pass parse.
 123          */
 124         status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
 125         if (ACPI_FAILURE(status)) {
 126                 goto cleanup;
 127         }
 128
 129         /* Create and initialize a new walk state */
 130
 131         walk_state =
 132             acpi_ds_create_walk_state(obj_desc->method.owner_id, NULL, NULL,
 133                                       NULL);
 134         if (!walk_state) {
 135                 status = AE_NO_MEMORY;
 136                 goto cleanup2;
 137         }
 138
 139         status = acpi_ds_init_aml_walk(walk_state, op, node,
 140                                        obj_desc->method.aml_start,
 141                                        obj_desc->method.aml_length, NULL, 1);
 142         if (ACPI_FAILURE(status)) {
 143                 acpi_ds_delete_walk_state(walk_state);
 144                 goto cleanup2;
 145         }
 146
 147         /*
 148          * Parse the method, first pass
 149          *
 150          * The first pass load is where newly declared named objects are added into
 151          * the namespace.  Actual evaluation of the named objects (what would be
 152          * called a "second pass") happens during the actual execution of the
 153          * method so that operands to the named objects can take on dynamic
 154          * run-time values.
 155          */
 156         status = acpi_ps_parse_aml(walk_state);
 157         if (ACPI_FAILURE(status)) {
 158                 goto cleanup2;
 159         }
 160
 161         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 162                           "**** [%4.4s] Parsed **** named_obj=%p Op=%p\n",
 163                           acpi_ut_get_node_name(node), node, op));
 164
 165         /*
 166          * Delete the parse tree. We simply re-parse the method for every
 167          * execution since there isn't much overhead (compared to keeping lots
 168          * of parse trees around)
 169          */
 170         acpi_ns_delete_namespace_subtree(node);
 171         acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
 172
 173       cleanup2:
 174         acpi_ut_release_owner_id(&obj_desc->method.owner_id);
 175
 176       cleanup:
 177         acpi_ps_delete_parse_tree(op);
 178         return_ACPI_STATUS(status);
 179 }
 180
 181 /*******************************************************************************
 182  *
 183  * FUNCTION:    acpi_ds_begin_method_execution
 184  *
 185  * PARAMETERS:  method_node         - Node of the method
 186  *              obj_desc            - The method object
 187  *              calling_method_node - Caller of this method (if non-null)
 188  *
 189  * RETURN:      Status
 190  *
 191  * DESCRIPTION: Prepare a method for execution.  Parses the method if necessary,
 192  *              increments the thread count, and waits at the method semaphore
 193  *              for clearance to execute.
 194  *
 195  ******************************************************************************/
 196
 197 acpi_status
 198 acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
 199                                union acpi_operand_object *obj_desc,
 200                                struct acpi_namespace_node *calling_method_node)
 201 {
 202         acpi_status status = AE_OK;
 203
 204         ACPI_FUNCTION_TRACE_PTR("ds_begin_method_execution", method_node);
 205
 206         if (!method_node) {
 207                 return_ACPI_STATUS(AE_NULL_ENTRY);
 208         }
 209
 210         /*
 211          * If there is a concurrency limit on this method, we need to
 212          * obtain a unit from the method semaphore.
 213          */
 214         if (obj_desc->method.semaphore) {
 215                 /*
 216                  * Allow recursive method calls, up to the reentrancy/concurrency
 217                  * limit imposed by the SERIALIZED rule and the sync_level method
 218                  * parameter.
 219                  *
 220                  * The point of this code is to avoid permanently blocking a
 221                  * thread that is making recursive method calls.
 222                  */
 223                 if (method_node == calling_method_node) {
 224                         if (obj_desc->method.thread_count >=
 225                             obj_desc->method.concurrency) {
 226                                 return_ACPI_STATUS(AE_AML_METHOD_LIMIT);
 227                         }
 228                 }
 229
 230                 /*
 231                  * Get a unit from the method semaphore. This releases the
 232                  * interpreter if we block
 233                  */
 234                 status =
 235                     acpi_ex_system_wait_semaphore(obj_desc->method.semaphore,
 236                                                   ACPI_WAIT_FOREVER);
 237         }
 238         /*
 239          * allocate owner id for this method
 240          */
 241         if (!obj_desc->method.thread_count) {
 242                 status = acpi_ut_allocate_owner_id (&obj_desc->method.owner_id);
 243                 if (ACPI_FAILURE (status)) {
 244                         return_ACPI_STATUS (status);
 245                 }
 246         }
 247
 248
 249         /*
 250          * Increment the method parse tree thread count since it has been
 251          * reentered one more time (even if it is the same thread)
 252          */
 253         obj_desc->method.thread_count++;
 254         return_ACPI_STATUS(status);
 255 }
 256
 257 /*******************************************************************************
 258  *
 259  * FUNCTION:    acpi_ds_call_control_method
 260  *
 261  * PARAMETERS:  Thread              - Info for this thread
 262  *              this_walk_state     - Current walk state
 263  *              Op                  - Current Op to be walked
 264  *
 265  * RETURN:      Status
 266  *
 267  * DESCRIPTION: Transfer execution to a called control method
 268  *
 269  ******************************************************************************/
 270
 271 acpi_status
 272 acpi_ds_call_control_method(struct acpi_thread_state *thread,
 273                             struct acpi_walk_state *this_walk_state,
 274                             union acpi_parse_object *op)
 275 {
 276         acpi_status status;
 277         struct acpi_namespace_node *method_node;
 278         struct acpi_walk_state *next_walk_state = NULL;
 279         union acpi_operand_object *obj_desc;
 280         struct acpi_parameter_info info;
 281         u32 i;
 282
 283         ACPI_FUNCTION_TRACE_PTR("ds_call_control_method", this_walk_state);
 284
 285         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 286                           "Execute method %p, currentstate=%p\n",
 287                           this_walk_state->prev_op, this_walk_state));
 288
 289         /*
 290          * Get the namespace entry for the control method we are about to call
 291          */
 292         method_node = this_walk_state->method_call_node;
 293         if (!method_node) {
 294                 return_ACPI_STATUS(AE_NULL_ENTRY);
 295         }
 296
 297         obj_desc = acpi_ns_get_attached_object(method_node);
 298         if (!obj_desc) {
 299                 return_ACPI_STATUS(AE_NULL_OBJECT);
 300         }
 301
 302         /* Init for new method, wait on concurrency semaphore */
 303
 304         status = acpi_ds_begin_method_execution(method_node, obj_desc,
 305                                                 this_walk_state->method_node);
 306         if (ACPI_FAILURE(status)) {
 307                 goto cleanup;
 308         }
 309
 310         if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
 311                 /* 1) Parse: Create a new walk state for the preempting walk */
 312
 313                 next_walk_state =
 314                     acpi_ds_create_walk_state(obj_desc->method.owner_id, op,
 315                                               obj_desc, NULL);
 316                 if (!next_walk_state) {
 317                         return_ACPI_STATUS(AE_NO_MEMORY);
 318                 }
 319
 320                 /* Create and init a Root Node */
 321
 322                 op = acpi_ps_create_scope_op();
 323                 if (!op) {
 324                         status = AE_NO_MEMORY;
 325                         goto cleanup;
 326                 }
 327
 328                 status = acpi_ds_init_aml_walk(next_walk_state, op, method_node,
 329                                                obj_desc->method.aml_start,
 330                                                obj_desc->method.aml_length,
 331                                                NULL, 1);
 332                 if (ACPI_FAILURE(status)) {
 333                         acpi_ds_delete_walk_state(next_walk_state);
 334                         goto cleanup;
 335                 }
 336
 337                 /* Begin AML parse */
 338
 339                 status = acpi_ps_parse_aml(next_walk_state);
 340                 acpi_ps_delete_parse_tree(op);
 341         }
 342
 343         /* 2) Execute: Create a new state for the preempting walk */
 344
 345         next_walk_state = acpi_ds_create_walk_state(obj_desc->method.owner_id,
 346                                                     NULL, obj_desc, thread);
 347         if (!next_walk_state) {
 348                 status = AE_NO_MEMORY;
 349                 goto cleanup;
 350         }
 351         /*
 352          * The resolved arguments were put on the previous walk state's operand
 353          * stack.  Operands on the previous walk state stack always
 354          * start at index 0.
 355          * Null terminate the list of arguments
 356          */
 357         this_walk_state->operands[this_walk_state->num_operands] = NULL;
 358
 359         info.parameters = &this_walk_state->operands[0];
 360         info.parameter_type = ACPI_PARAM_ARGS;
 361
 362         status = acpi_ds_init_aml_walk(next_walk_state, NULL, method_node,
 363                                        obj_desc->method.aml_start,
 364                                        obj_desc->method.aml_length, &info, 3);
 365         if (ACPI_FAILURE(status)) {
 366                 goto cleanup;
 367         }
 368
 369         /*
 370          * Delete the operands on the previous walkstate operand stack
 371          * (they were copied to new objects)
 372          */
 373         for (i = 0; i < obj_desc->method.param_count; i++) {
 374                 acpi_ut_remove_reference(this_walk_state->operands[i]);
 375                 this_walk_state->operands[i] = NULL;
 376         }
 377
 378         /* Clear the operand stack */
 379
 380         this_walk_state->num_operands = 0;
 381
 382         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 383                           "Starting nested execution, newstate=%p\n",
 384                           next_walk_state));
 385
 386         if (obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) {
 387                 status = obj_desc->method.implementation(next_walk_state);
 388         }
 389         goto end;
 390
 391 cleanup:
 392         /* Decrement the thread count on the method parse tree */
 393         if (next_walk_state && (next_walk_state->method_desc)) {
 394                 next_walk_state->method_desc->method.thread_count--;
 395         }
 396         /* On error, we must delete the new walk state */
 397         acpi_ds_terminate_control_method (next_walk_state);
 398         acpi_ds_delete_walk_state (next_walk_state);
 399 end:
 400         return_ACPI_STATUS(status);
 401 }
 402
 403 /*******************************************************************************
 404  *
 405  * FUNCTION:    acpi_ds_restart_control_method
 406  *
 407  * PARAMETERS:  walk_state          - State for preempted method (caller)
 408  *              return_desc         - Return value from the called method
 409  *
 410  * RETURN:      Status
 411  *
 412  * DESCRIPTION: Restart a method that was preempted by another (nested) method
 413  *              invocation.  Handle the return value (if any) from the callee.
 414  *
 415  ******************************************************************************/
 416
 417 acpi_status
 418 acpi_ds_restart_control_method(struct acpi_walk_state *walk_state,
 419                                union acpi_operand_object *return_desc)
 420 {
 421         acpi_status status;
 422
 423         ACPI_FUNCTION_TRACE_PTR("ds_restart_control_method", walk_state);
 424
 425         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 426                           "****Restart [%4.4s] Op %p return_value_from_callee %p\n",
 427                           (char *)&walk_state->method_node->name,
 428                           walk_state->method_call_op, return_desc));
 429
 430         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 431                           "    return_from_this_method_used?=%X res_stack %p Walk %p\n",
 432                           walk_state->return_used,
 433                           walk_state->results, walk_state));
 434
 435         /* Did the called method return a value? */
 436
 437         if (return_desc) {
 438                 /* Are we actually going to use the return value? */
 439
 440                 if (walk_state->return_used) {
 441                         /* Save the return value from the previous method */
 442
 443                         status = acpi_ds_result_push(return_desc, walk_state);
 444                         if (ACPI_FAILURE(status)) {
 445                                 acpi_ut_remove_reference(return_desc);
 446                                 return_ACPI_STATUS(status);
 447                         }
 448
 449                         /*
 450                          * Save as THIS method's return value in case it is returned
 451                          * immediately to yet another method
 452                          */
 453                         walk_state->return_desc = return_desc;
 454                 }
 455
 456                 /*
 457                  * The following code is the
 458                  * optional support for a so-called "implicit return". Some AML code
 459                  * assumes that the last value of the method is "implicitly" returned
 460                  * to the caller. Just save the last result as the return value.
 461                  * NOTE: this is optional because the ASL language does not actually
 462                  * support this behavior.
 463                  */
 464                 else if (!acpi_ds_do_implicit_return
 465                          (return_desc, walk_state, FALSE)) {
 466                         /*
 467                          * Delete the return value if it will not be used by the
 468                          * calling method
 469                          */
 470                         acpi_ut_remove_reference(return_desc);
 471                 }
 472         }
 473
 474         return_ACPI_STATUS(AE_OK);
 475 }
 476
 477 /*******************************************************************************
 478  *
 479  * FUNCTION:    acpi_ds_terminate_control_method
 480  *
 481  * PARAMETERS:  walk_state          - State of the method
 482  *
 483  * RETURN:      None
 484  *
 485  * DESCRIPTION: Terminate a control method.  Delete everything that the method
 486  *              created, delete all locals and arguments, and delete the parse
 487  *              tree if requested.
 488  *
 489  ******************************************************************************/
 490
 491 void acpi_ds_terminate_control_method(struct acpi_walk_state *walk_state)
 492 {
 493         union acpi_operand_object *obj_desc;
 494         struct acpi_namespace_node *method_node;
 495         acpi_status status;
 496
 497         ACPI_FUNCTION_TRACE_PTR("ds_terminate_control_method", walk_state);
 498
 499         if (!walk_state) {
 500                 return_VOID;
 501         }
 502
 503         /* The current method object was saved in the walk state */
 504
 505         obj_desc = walk_state->method_desc;
 506         if (!obj_desc) {
 507                 return_VOID;
 508         }
 509
 510         /* Delete all arguments and locals */
 511
 512         acpi_ds_method_data_delete_all(walk_state);
 513
 514         /*
 515          * Lock the parser while we terminate this method.
 516          * If this is the last thread executing the method,
 517          * we have additional cleanup to perform
 518          */
 519         status = acpi_ut_acquire_mutex(ACPI_MTX_PARSER);
 520         if (ACPI_FAILURE(status)) {
 521                 return_VOID;
 522         }
 523
 524         /* Signal completion of the execution of this method if necessary */
 525
 526         if (walk_state->method_desc->method.semaphore) {
 527                 status =
 528                     acpi_os_signal_semaphore(walk_state->method_desc->method.
 529                                              semaphore, 1);
 530                 if (ACPI_FAILURE(status)) {
 531                         ACPI_REPORT_ERROR(("Could not signal method semaphore\n"));
 532                         status = AE_OK;
 533
 534                         /* Ignore error and continue cleanup */
 535                 }
 536         }
 537
 538         if (walk_state->method_desc->method.thread_count) {
 539                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 540                                   "*** Not deleting method namespace, there are still %d threads\n",
 541                                   walk_state->method_desc->method.
 542                                   thread_count));
 543         }
 544
 545         if (!walk_state->method_desc->method.thread_count) {
 546                 /*
 547                  * Support to dynamically change a method from not_serialized to
 548                  * Serialized if it appears that the method is written foolishly and
 549                  * does not support multiple thread execution.  The best example of this
 550                  * is if such a method creates namespace objects and blocks.  A second
 551                  * thread will fail with an AE_ALREADY_EXISTS exception
 552                  *
 553                  * This code is here because we must wait until the last thread exits
 554                  * before creating the synchronization semaphore.
 555                  */
 556                 if ((walk_state->method_desc->method.concurrency == 1) &&
 557                     (!walk_state->method_desc->method.semaphore)) {
 558                         status = acpi_os_create_semaphore(1, 1,
 559                                                           &walk_state->
 560                                                           method_desc->method.
 561                                                           semaphore);
 562                 }
 563
 564                 /*
 565                  * There are no more threads executing this method.  Perform
 566                  * additional cleanup.
 567                  *
 568                  * The method Node is stored in the walk state
 569                  */
 570                 method_node = walk_state->method_node;
 571
 572                 /*
 573                  * Delete any namespace entries created immediately underneath
 574                  * the method
 575                  */
 576                 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 577                 if (ACPI_FAILURE(status)) {
 578                         goto cleanup;
 579                 }
 580
 581                 if (method_node->child) {
 582                         acpi_ns_delete_namespace_subtree(method_node);
 583                 }
 584
 585                 /*
 586                  * Delete any namespace entries created anywhere else within
 587                  * the namespace
 588                  */
 589                 acpi_ns_delete_namespace_by_owner(walk_state->method_desc->
 590                                                   method.owner_id);
 591                 status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 592                 acpi_ut_release_owner_id(&walk_state->method_desc->method.
 593                                          owner_id);
 594
 595                 if (ACPI_FAILURE(status)) {
 596                         goto cleanup;
 597                 }
 598         }
 599 cleanup:
 600         acpi_ut_release_mutex (ACPI_MTX_PARSER);
 601 }