err.no Git - linux-2.6/blob - drivers/acpi/dispatcher/dsfield.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsfield - Dispatcher field routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2007, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/amlcode.h>
  46 #include <acpi/acdispat.h>
  47 #include <acpi/acinterp.h>
  48 #include <acpi/acnamesp.h>
  49 #include <acpi/acparser.h>
  50
  51 #define _COMPONENT          ACPI_DISPATCHER
  52 ACPI_MODULE_NAME("dsfield")
  53
  54 /* Local prototypes */
  55 static acpi_status
  56 acpi_ds_get_field_names(struct acpi_create_field_info *info,
  57                         struct acpi_walk_state *walk_state,
  58                         union acpi_parse_object *arg);
  59
  60 /*******************************************************************************
  61  *
  62  * FUNCTION:    acpi_ds_create_buffer_field
  63  *
  64  * PARAMETERS:  Op                  - Current parse op (create_xXField)
  65  *              walk_state          - Current state
  66  *
  67  * RETURN:      Status
  68  *
  69  * DESCRIPTION: Execute the create_field operators:
  70  *              create_bit_field_op,
  71  *              create_byte_field_op,
  72  *              create_word_field_op,
  73  *              create_dword_field_op,
  74  *              create_qword_field_op,
  75  *              create_field_op     (all of which define a field in a buffer)
  76  *
  77  ******************************************************************************/
  78
  79 acpi_status
  80 acpi_ds_create_buffer_field(union acpi_parse_object *op,
  81                             struct acpi_walk_state *walk_state)
  82 {
  83         union acpi_parse_object *arg;
  84         struct acpi_namespace_node *node;
  85         acpi_status status;
  86         union acpi_operand_object *obj_desc;
  87         union acpi_operand_object *second_desc = NULL;
  88         u32 flags;
  89
  90         ACPI_FUNCTION_TRACE(ds_create_buffer_field);
  91
  92         /* Get the name_string argument */
  93
  94         if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
  95                 arg = acpi_ps_get_arg(op, 3);
  96         } else {
  97                 /* Create Bit/Byte/Word/Dword field */
  98
  99                 arg = acpi_ps_get_arg(op, 2);
 100         }
 101
 102         if (!arg) {
 103                 return_ACPI_STATUS(AE_AML_NO_OPERAND);
 104         }
 105
 106         if (walk_state->deferred_node) {
 107                 node = walk_state->deferred_node;
 108                 status = AE_OK;
 109         } else {
 110                 /*
 111                  * During the load phase, we want to enter the name of the field into
 112                  * the namespace.  During the execute phase (when we evaluate the size
 113                  * operand), we want to lookup the name
 114                  */
 115                 if (walk_state->parse_flags & ACPI_PARSE_EXECUTE) {
 116                         flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE;
 117                 } else {
 118                         flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
 119                             ACPI_NS_ERROR_IF_FOUND;
 120                 }
 121
 122                 /*
 123                  * Enter the name_string into the namespace
 124                  */
 125                 status =
 126                     acpi_ns_lookup(walk_state->scope_info,
 127                                    arg->common.value.string, ACPI_TYPE_ANY,
 128                                    ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 129                                    &(node));
 130                 if (ACPI_FAILURE(status)) {
 131                         ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 132                         return_ACPI_STATUS(status);
 133                 }
 134         }
 135
 136         /*
 137          * We could put the returned object (Node) on the object stack for later,
 138          * but for now, we will put it in the "op" object that the parser uses,
 139          * so we can get it again at the end of this scope
 140          */
 141         op->common.node = node;
 142
 143         /*
 144          * If there is no object attached to the node, this node was just created
 145          * and we need to create the field object.  Otherwise, this was a lookup
 146          * of an existing node and we don't want to create the field object again.
 147          */
 148         obj_desc = acpi_ns_get_attached_object(node);
 149         if (obj_desc) {
 150                 return_ACPI_STATUS(AE_OK);
 151         }
 152
 153         /*
 154          * The Field definition is not fully parsed at this time.
 155          * (We must save the address of the AML for the buffer and index operands)
 156          */
 157
 158         /* Create the buffer field object */
 159
 160         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD);
 161         if (!obj_desc) {
 162                 status = AE_NO_MEMORY;
 163                 goto cleanup;
 164         }
 165
 166         /*
 167          * Remember location in AML stream of the field unit
 168          * opcode and operands -- since the buffer and index
 169          * operands must be evaluated.
 170          */
 171         second_desc = obj_desc->common.next_object;
 172         second_desc->extra.aml_start = op->named.data;
 173         second_desc->extra.aml_length = op->named.length;
 174         obj_desc->buffer_field.node = node;
 175
 176         /* Attach constructed field descriptors to parent node */
 177
 178         status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
 179         if (ACPI_FAILURE(status)) {
 180                 goto cleanup;
 181         }
 182
 183       cleanup:
 184
 185         /* Remove local reference to the object */
 186
 187         acpi_ut_remove_reference(obj_desc);
 188         return_ACPI_STATUS(status);
 189 }
 190
 191 /*******************************************************************************
 192  *
 193  * FUNCTION:    acpi_ds_get_field_names
 194  *
 195  * PARAMETERS:  Info            - create_field info structure
 196  *  `           walk_state      - Current method state
 197  *              Arg             - First parser arg for the field name list
 198  *
 199  * RETURN:      Status
 200  *
 201  * DESCRIPTION: Process all named fields in a field declaration.  Names are
 202  *              entered into the namespace.
 203  *
 204  ******************************************************************************/
 205
 206 static acpi_status
 207 acpi_ds_get_field_names(struct acpi_create_field_info *info,
 208                         struct acpi_walk_state *walk_state,
 209                         union acpi_parse_object *arg)
 210 {
 211         acpi_status status;
 212         acpi_integer position;
 213
 214         ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info);
 215
 216         /* First field starts at bit zero */
 217
 218         info->field_bit_position = 0;
 219
 220         /* Process all elements in the field list (of parse nodes) */
 221
 222         while (arg) {
 223                 /*
 224                  * Three types of field elements are handled:
 225                  * 1) Offset - specifies a bit offset
 226                  * 2) access_as - changes the access mode
 227                  * 3) Name - Enters a new named field into the namespace
 228                  */
 229                 switch (arg->common.aml_opcode) {
 230                 case AML_INT_RESERVEDFIELD_OP:
 231
 232                         position = (acpi_integer) info->field_bit_position
 233                             + (acpi_integer) arg->common.value.size;
 234
 235                         if (position > ACPI_UINT32_MAX) {
 236                                 ACPI_ERROR((AE_INFO,
 237                                             "Bit offset within field too large (> 0xFFFFFFFF)"));
 238                                 return_ACPI_STATUS(AE_SUPPORT);
 239                         }
 240
 241                         info->field_bit_position = (u32) position;
 242                         break;
 243
 244                 case AML_INT_ACCESSFIELD_OP:
 245
 246                         /*
 247                          * Get a new access_type and access_attribute -- to be used for all
 248                          * field units that follow, until field end or another access_as
 249                          * keyword.
 250                          *
 251                          * In field_flags, preserve the flag bits other than the
 252                          * ACCESS_TYPE bits
 253                          */
 254                         info->field_flags = (u8)
 255                             ((info->
 256                               field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
 257                              ((u8) ((u32) arg->common.value.integer >> 8)));
 258
 259                         info->attribute = (u8) (arg->common.value.integer);
 260                         break;
 261
 262                 case AML_INT_NAMEDFIELD_OP:
 263
 264                         /* Lookup the name */
 265
 266                         status = acpi_ns_lookup(walk_state->scope_info,
 267                                                 (char *)&arg->named.name,
 268                                                 info->field_type,
 269                                                 ACPI_IMODE_EXECUTE,
 270                                                 ACPI_NS_DONT_OPEN_SCOPE,
 271                                                 walk_state, &info->field_node);
 272                         if (ACPI_FAILURE(status)) {
 273                                 ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
 274                                                      status);
 275                                 if (status != AE_ALREADY_EXISTS) {
 276                                         return_ACPI_STATUS(status);
 277                                 }
 278
 279                                 /* Already exists, ignore error */
 280                         } else {
 281                                 arg->common.node = info->field_node;
 282                                 info->field_bit_length = arg->common.value.size;
 283
 284                                 /* Create and initialize an object for the new Field Node */
 285
 286                                 status = acpi_ex_prep_field_value(info);
 287                                 if (ACPI_FAILURE(status)) {
 288                                         return_ACPI_STATUS(status);
 289                                 }
 290                         }
 291
 292                         /* Keep track of bit position for the next field */
 293
 294                         position = (acpi_integer) info->field_bit_position
 295                             + (acpi_integer) arg->common.value.size;
 296
 297                         if (position > ACPI_UINT32_MAX) {
 298                                 ACPI_ERROR((AE_INFO,
 299                                             "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
 300                                             ACPI_CAST_PTR(char,
 301                                                           &info->field_node->
 302                                                           name)));
 303                                 return_ACPI_STATUS(AE_SUPPORT);
 304                         }
 305
 306                         info->field_bit_position += info->field_bit_length;
 307                         break;
 308
 309                 default:
 310
 311                         ACPI_ERROR((AE_INFO,
 312                                     "Invalid opcode in field list: %X",
 313                                     arg->common.aml_opcode));
 314                         return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 315                 }
 316
 317                 arg = arg->common.next;
 318         }
 319
 320         return_ACPI_STATUS(AE_OK);
 321 }
 322
 323 /*******************************************************************************
 324  *
 325  * FUNCTION:    acpi_ds_create_field
 326  *
 327  * PARAMETERS:  Op              - Op containing the Field definition and args
 328  *              region_node     - Object for the containing Operation Region
 329  *  `           walk_state      - Current method state
 330  *
 331  * RETURN:      Status
 332  *
 333  * DESCRIPTION: Create a new field in the specified operation region
 334  *
 335  ******************************************************************************/
 336
 337 acpi_status
 338 acpi_ds_create_field(union acpi_parse_object *op,
 339                      struct acpi_namespace_node *region_node,
 340                      struct acpi_walk_state *walk_state)
 341 {
 342         acpi_status status;
 343         union acpi_parse_object *arg;
 344         struct acpi_create_field_info info;
 345
 346         ACPI_FUNCTION_TRACE_PTR(ds_create_field, op);
 347
 348         /* First arg is the name of the parent op_region (must already exist) */
 349
 350         arg = op->common.value.arg;
 351         if (!region_node) {
 352                 status =
 353                     acpi_ns_lookup(walk_state->scope_info,
 354                                    arg->common.value.name, ACPI_TYPE_REGION,
 355                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 356                                    walk_state, &region_node);
 357                 if (ACPI_FAILURE(status)) {
 358                         ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 359                         return_ACPI_STATUS(status);
 360                 }
 361         }
 362
 363         /* Second arg is the field flags */
 364
 365         arg = arg->common.next;
 366         info.field_flags = (u8) arg->common.value.integer;
 367         info.attribute = 0;
 368
 369         /* Each remaining arg is a Named Field */
 370
 371         info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
 372         info.region_node = region_node;
 373
 374         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 375
 376         return_ACPI_STATUS(status);
 377 }
 378
 379 /*******************************************************************************
 380  *
 381  * FUNCTION:    acpi_ds_init_field_objects
 382  *
 383  * PARAMETERS:  Op              - Op containing the Field definition and args
 384  *  `           walk_state      - Current method state
 385  *
 386  * RETURN:      Status
 387  *
 388  * DESCRIPTION: For each "Field Unit" name in the argument list that is
 389  *              part of the field declaration, enter the name into the
 390  *              namespace.
 391  *
 392  ******************************************************************************/
 393
 394 acpi_status
 395 acpi_ds_init_field_objects(union acpi_parse_object *op,
 396                            struct acpi_walk_state *walk_state)
 397 {
 398         acpi_status status;
 399         union acpi_parse_object *arg = NULL;
 400         struct acpi_namespace_node *node;
 401         u8 type = 0;
 402
 403         ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op);
 404
 405         switch (walk_state->opcode) {
 406         case AML_FIELD_OP:
 407                 arg = acpi_ps_get_arg(op, 2);
 408                 type = ACPI_TYPE_LOCAL_REGION_FIELD;
 409                 break;
 410
 411         case AML_BANK_FIELD_OP:
 412                 arg = acpi_ps_get_arg(op, 4);
 413                 type = ACPI_TYPE_LOCAL_BANK_FIELD;
 414                 break;
 415
 416         case AML_INDEX_FIELD_OP:
 417                 arg = acpi_ps_get_arg(op, 3);
 418                 type = ACPI_TYPE_LOCAL_INDEX_FIELD;
 419                 break;
 420
 421         default:
 422                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 423         }
 424
 425         /*
 426          * Walk the list of entries in the field_list
 427          */
 428         while (arg) {
 429
 430                 /* Ignore OFFSET and ACCESSAS terms here */
 431
 432                 if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
 433                         status = acpi_ns_lookup(walk_state->scope_info,
 434                                                 (char *)&arg->named.name,
 435                                                 type, ACPI_IMODE_LOAD_PASS1,
 436                                                 ACPI_NS_NO_UPSEARCH |
 437                                                 ACPI_NS_DONT_OPEN_SCOPE |
 438                                                 ACPI_NS_ERROR_IF_FOUND,
 439                                                 walk_state, &node);
 440                         if (ACPI_FAILURE(status)) {
 441                                 ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
 442                                                      status);
 443                                 if (status != AE_ALREADY_EXISTS) {
 444                                         return_ACPI_STATUS(status);
 445                                 }
 446
 447                                 /* Name already exists, just ignore this error */
 448
 449                                 status = AE_OK;
 450                         }
 451
 452                         arg->common.node = node;
 453                 }
 454
 455                 /* Move to next field in the list */
 456
 457                 arg = arg->common.next;
 458         }
 459
 460         return_ACPI_STATUS(AE_OK);
 461 }
 462
 463 /*******************************************************************************
 464  *
 465  * FUNCTION:    acpi_ds_create_bank_field
 466  *
 467  * PARAMETERS:  Op              - Op containing the Field definition and args
 468  *              region_node     - Object for the containing Operation Region
 469  *  `           walk_state      - Current method state
 470  *
 471  * RETURN:      Status
 472  *
 473  * DESCRIPTION: Create a new bank field in the specified operation region
 474  *
 475  ******************************************************************************/
 476
 477 acpi_status
 478 acpi_ds_create_bank_field(union acpi_parse_object *op,
 479                           struct acpi_namespace_node *region_node,
 480                           struct acpi_walk_state *walk_state)
 481 {
 482         acpi_status status;
 483         union acpi_parse_object *arg;
 484         struct acpi_create_field_info info;
 485
 486         ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op);
 487
 488         /* First arg is the name of the parent op_region (must already exist) */
 489
 490         arg = op->common.value.arg;
 491         if (!region_node) {
 492                 status =
 493                     acpi_ns_lookup(walk_state->scope_info,
 494                                    arg->common.value.name, ACPI_TYPE_REGION,
 495                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 496                                    walk_state, &region_node);
 497                 if (ACPI_FAILURE(status)) {
 498                         ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
 499                         return_ACPI_STATUS(status);
 500                 }
 501         }
 502
 503         /* Second arg is the Bank Register (Field) (must already exist) */
 504
 505         arg = arg->common.next;
 506         status =
 507             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 508                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 509                            ACPI_NS_SEARCH_PARENT, walk_state,
 510                            &info.register_node);
 511         if (ACPI_FAILURE(status)) {
 512                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 513                 return_ACPI_STATUS(status);
 514         }
 515
 516         /* Third arg is the bank_value */
 517
 518         /* TBD: This arg is a term_arg, not a constant, and must be evaluated */
 519
 520         arg = arg->common.next;
 521
 522         /* Currently, only the following constants are supported */
 523
 524         switch (arg->common.aml_opcode) {
 525         case AML_ZERO_OP:
 526                 info.bank_value = 0;
 527                 break;
 528
 529         case AML_ONE_OP:
 530                 info.bank_value = 1;
 531                 break;
 532
 533         case AML_BYTE_OP:
 534         case AML_WORD_OP:
 535         case AML_DWORD_OP:
 536         case AML_QWORD_OP:
 537                 info.bank_value = (u32) arg->common.value.integer;
 538                 break;
 539
 540         default:
 541                 info.bank_value = 0;
 542                 ACPI_ERROR((AE_INFO,
 543                             "Non-constant BankValue for BankField is not implemented"));
 544         }
 545
 546         /* Fourth arg is the field flags */
 547
 548         arg = arg->common.next;
 549         info.field_flags = (u8) arg->common.value.integer;
 550
 551         /* Each remaining arg is a Named Field */
 552
 553         info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
 554         info.region_node = region_node;
 555
 556         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 557
 558         return_ACPI_STATUS(status);
 559 }
 560
 561 /*******************************************************************************
 562  *
 563  * FUNCTION:    acpi_ds_create_index_field
 564  *
 565  * PARAMETERS:  Op              - Op containing the Field definition and args
 566  *              region_node     - Object for the containing Operation Region
 567  *  `           walk_state      - Current method state
 568  *
 569  * RETURN:      Status
 570  *
 571  * DESCRIPTION: Create a new index field in the specified operation region
 572  *
 573  ******************************************************************************/
 574
 575 acpi_status
 576 acpi_ds_create_index_field(union acpi_parse_object *op,
 577                            struct acpi_namespace_node *region_node,
 578                            struct acpi_walk_state *walk_state)
 579 {
 580         acpi_status status;
 581         union acpi_parse_object *arg;
 582         struct acpi_create_field_info info;
 583
 584         ACPI_FUNCTION_TRACE_PTR(ds_create_index_field, op);
 585
 586         /* First arg is the name of the Index register (must already exist) */
 587
 588         arg = op->common.value.arg;
 589         status =
 590             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 591                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 592                            ACPI_NS_SEARCH_PARENT, walk_state,
 593                            &info.register_node);
 594         if (ACPI_FAILURE(status)) {
 595                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 596                 return_ACPI_STATUS(status);
 597         }
 598
 599         /* Second arg is the data register (must already exist) */
 600
 601         arg = arg->common.next;
 602         status =
 603             acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
 604                            ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 605                            ACPI_NS_SEARCH_PARENT, walk_state,
 606                            &info.data_register_node);
 607         if (ACPI_FAILURE(status)) {
 608                 ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
 609                 return_ACPI_STATUS(status);
 610         }
 611
 612         /* Next arg is the field flags */
 613
 614         arg = arg->common.next;
 615         info.field_flags = (u8) arg->common.value.integer;
 616
 617         /* Each remaining arg is a Named Field */
 618
 619         info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
 620         info.region_node = region_node;
 621
 622         status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
 623
 624         return_ACPI_STATUS(status);
 625 }