2 * Low-Level PCI Access for i386 machines.
4 * (c) 1999 Martin Mares <mj@ucw.cz>
10 #define DBG(x...) printk(x)
15 #define PCI_PROBE_BIOS 0x0001
16 #define PCI_PROBE_CONF1 0x0002
17 #define PCI_PROBE_CONF2 0x0004
18 #define PCI_PROBE_MMCONF 0x0008
19 #define PCI_PROBE_MASK 0x000f
20 #define PCI_PROBE_NOEARLY 0x0010
22 #define PCI_NO_CHECKS 0x0400
23 #define PCI_USE_PIRQ_MASK 0x0800
24 #define PCI_ASSIGN_ROMS 0x1000
25 #define PCI_BIOS_IRQ_SCAN 0x2000
26 #define PCI_ASSIGN_ALL_BUSSES 0x4000
27 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000
28 #define PCI_USE__CRS 0x10000
29 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
31 extern unsigned int pci_probe;
32 extern unsigned long pirq_table_addr;
34 enum pci_bf_sort_state {
43 extern unsigned int pcibios_max_latency;
45 void pcibios_resource_survey(void);
49 extern int pcibios_last_bus;
50 extern struct pci_bus *pci_root_bus;
51 extern struct pci_ops pci_root_ops;
56 u8 bus, devfn; /* Bus, device and function */
58 u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
59 u16 bitmap; /* Available IRQs */
60 } __attribute__((packed)) irq[4];
61 u8 slot; /* Slot number, 0=onboard */
63 } __attribute__((packed));
65 struct irq_routing_table {
66 u32 signature; /* PIRQ_SIGNATURE should be here */
67 u16 version; /* PIRQ_VERSION */
68 u16 size; /* Table size in bytes */
69 u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
70 u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
71 u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
72 u32 miniport_data; /* Crap */
74 u8 checksum; /* Modulo 256 checksum must give zero */
75 struct irq_info slots[0];
76 } __attribute__((packed));
78 extern unsigned int pcibios_irq_mask;
80 extern int pcibios_scanned;
81 extern spinlock_t pci_config_lock;
83 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
84 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
87 int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
88 int reg, int len, u32 *val);
89 int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
90 int reg, int len, u32 val);
93 extern struct pci_raw_ops *raw_pci_ops;
94 extern struct pci_raw_ops *raw_pci_ext_ops;
96 extern struct pci_raw_ops pci_direct_conf1;
98 extern int pci_direct_probe(void);
99 extern void pci_direct_init(int type);
100 extern void pci_pcbios_init(void);
101 extern void pci_olpc_init(void);
105 extern int __init pci_mmcfg_arch_init(void);
106 extern void __init pci_mmcfg_arch_free(void);
109 * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
110 * on their northbrige except through the * %eax register. As such, you MUST
111 * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
112 * accessor functions.
113 * In fact just use pci_config_*, nothing else please.
115 static inline unsigned char mmio_config_readb(void __iomem *pos)
118 asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
122 static inline unsigned short mmio_config_readw(void __iomem *pos)
125 asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
129 static inline unsigned int mmio_config_readl(void __iomem *pos)
132 asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
136 static inline void mmio_config_writeb(void __iomem *pos, u8 val)
138 asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
141 static inline void mmio_config_writew(void __iomem *pos, u16 val)
143 asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
146 static inline void mmio_config_writel(void __iomem *pos, u32 val)
148 asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");