2 * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
4 * Copyright (C) 2002,03,04,05 NEC Electronics Corporation
5 * Copyright (C) 2002,03,04,05 Miles Bader <miles@gnu.org>
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
11 * Written by Miles Bader <miles@gnu.org>
15 #define VMLINUX_SYMBOL(_sym_) _##_sym_
16 #include <asm-generic/vmlinux.lds.h>
18 /* For most platforms, this will define useful things like RAM addr/size. */
19 #include <asm/machdep.h>
22 /* The following macros contain the usual definitions for various data areas.
23 The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
24 into RAM, and similarly `ROMK_' for ROM-resident kernels. Note that all
25 symbols are prefixed with an extra `_' for compatibility with the v850
29 /* Interrupt vectors. */
30 #define INTV_CONTENTS \
33 *(.intv.reset) /* Reset vector */ \
34 . = __intv_start + 0x10 ; \
35 *(.intv.common) /* Vectors common to all v850e proc */\
36 . = __intv_start + 0x80 ; \
37 *(.intv.mach) /* Machine-specific int. vectors. */ \
40 #define RODATA_CONTENTS \
42 *(.rodata) *(.rodata.*) \
43 *(__vermagic) /* Kernel version magic */ \
46 ___start_pci_fixups_early = . ; \
48 ___end_pci_fixups_early = . ; \
49 ___start_pci_fixups_header = . ; \
50 *(.pci_fixup_header) \
51 ___end_pci_fixups_header = . ; \
52 ___start_pci_fixups_final = . ; \
54 ___end_pci_fixups_final = . ; \
55 ___start_pci_fixups_enable = . ; \
56 *(.pci_fixup_enable) \
57 ___end_pci_fixups_enable = . ; \
58 /* Kernel symbol table: Normal symbols */ \
59 ___start___ksymtab = .; \
61 ___stop___ksymtab = .; \
62 /* Kernel symbol table: GPL-only symbols */ \
63 ___start___ksymtab_gpl = .; \
65 ___stop___ksymtab_gpl = .; \
66 /* Kernel symbol table: GPL-future symbols */ \
67 ___start___ksymtab_gpl_future = .; \
68 *(__ksymtab_gpl_future) \
69 ___stop___ksymtab_gpl_future = .; \
70 /* Kernel symbol table: strings */ \
71 *(__ksymtab_strings) \
72 /* Kernel symbol table: Normal symbols */ \
73 ___start___kcrctab = .; \
75 ___stop___kcrctab = .; \
76 /* Kernel symbol table: GPL-only symbols */ \
77 ___start___kcrctab_gpl = .; \
79 ___stop___kcrctab_gpl = .; \
80 /* Kernel symbol table: GPL-future symbols */ \
81 ___start___kcrctab_gpl_future = .; \
82 *(__kcrctab_gpl_future) \
83 ___stop___kcrctab_gpl_future = .; \
84 /* Built-in module parameters */ \
86 ___start___param = .; \
91 /* Kernel text segment, and some constant data areas. */
92 #define TEXT_CONTENTS \
97 *(.exit.text) /* 2.5 convention */ \
98 *(.text.exit) /* 2.4 convention */ \
101 __real_etext = . ; /* There may be data after here. */ \
104 *(.call_table_data) \
105 *(.call_table_text) \
106 . = ALIGN (16) ; /* Exception table. */ \
107 ___start___ex_table = . ; \
109 ___stop___ex_table = . ; \
113 /* Kernel data segment. */
114 #define DATA_CONTENTS \
117 EXIT_DATA /* 2.5 convention */ \
118 *(.data.exit) /* 2.4 convention */ \
120 *(.data.cacheline_aligned) \
121 . = ALIGN (0x2000) ; \
123 . = ALIGN (0x2000) ; \
126 /* Kernel BSS segment. */
127 #define BSS_CONTENTS \
132 __init_stack_end = . ; \
135 /* `initcall' tables. */
136 #define INITCALL_CONTENTS \
138 ___setup_start = . ; \
139 *(.init.setup) /* 2.5 convention */ \
140 *(.setup.init) /* 2.4 convention */ \
142 ___initcall_start = . ; \
146 ___initcall_end = . ; \
147 ___con_initcall_start = .; \
148 *(.con_initcall.init) \
149 ___con_initcall_end = .;
151 /* Contents of `init' section for a kernel that's loaded into RAM. */
152 #define RAMK_INIT_CONTENTS \
153 RAMK_INIT_CONTENTS_NO_END \
155 /* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol. */
156 #define RAMK_INIT_CONTENTS_NO_END \
160 INIT_TEXT /* 2.5 convention */ \
163 *(.text.init) /* 2.4 convention */ \
168 /* The contents of `init' section for a ROM-resident kernel which
169 should go into RAM. */
170 #define ROMK_INIT_RAM_CONTENTS \
173 INIT_DATA /* 2.5 convention */ \
174 *(.data.init) /* 2.4 convention */ \
178 /* The contents of `init' section for a ROM-resident kernel which
179 should go into ROM. */
180 #define ROMK_INIT_ROM_CONTENTS \
182 INIT_TEXT /* 2.5 convention */ \
184 *(.text.init) /* 2.4 convention */ \
188 /* A root filesystem image, for kernels with an embedded root filesystem. */
189 #define ROOT_FS_CONTENTS \
190 __root_fs_image_start = . ; \
192 __root_fs_image_end = . ;
194 #ifdef CONFIG_BLK_DEV_INITRD
195 /* The initramfs archive. */
196 #define INITRAMFS_CONTENTS \
198 ___initramfs_start = . ; \
200 ___initramfs_end = . ;
203 /* Where the initial bootmap (bitmap for the boot-time memory allocator)
205 #define BOOTMAP_CONTENTS \
208 . = . + 4096 ; /* enough for 128MB. */
210 /* The contents of a `typical' kram area for a kernel in RAM. */
211 #define RAMK_KRAM_CONTENTS \
221 /* Define output sections normally used for a ROM-resident kernel.
222 ROM and RAM should be appropriate memory areas to use for kernel
223 ROM and RAM data. This assumes that ROM starts at 0 (and thus can
224 hold the interrupt vectors). */
225 #define ROMK_SECTIONS(ROM, RAM) \
229 ROMK_INIT_ROM_CONTENTS \
233 __rom_copy_src_start = . ; \
237 __rom_copy_dst_start = . ; \
239 ROMK_INIT_RAM_CONTENTS \
240 __rom_copy_dst_end = . ; \
250 /* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'. */
251 _jiffies = _jiffies_64 ;
254 /* Include an appropriate platform-dependent linker-script (which
255 usually should use the above macros to do most of the work). */
257 #ifdef CONFIG_V850E_SIM
261 #ifdef CONFIG_V850E2_SIM85E2
262 # include "sim85e2.ld"
265 #ifdef CONFIG_V850E2_FPGA85E2C
266 # include "fpga85e2c.ld"
269 #ifdef CONFIG_V850E2_ANNA
270 # ifdef CONFIG_ROM_KERNEL
271 # include "anna-rom.ld"
277 #ifdef CONFIG_V850E_AS85EP1
278 # ifdef CONFIG_ROM_KERNEL
279 # include "as85ep1-rom.ld"
281 # include "as85ep1.ld"
285 #ifdef CONFIG_RTE_CB_MA1
286 # ifdef CONFIG_ROM_KERNEL
287 # include "rte_ma1_cb-rom.ld"
289 # include "rte_ma1_cb.ld"
293 #ifdef CONFIG_RTE_CB_NB85E
294 # ifdef CONFIG_ROM_KERNEL
295 # include "rte_nb85e_cb-rom.ld"
296 # elif defined(CONFIG_RTE_CB_MULTI)
297 # include "rte_nb85e_cb-multi.ld"
299 # include "rte_nb85e_cb.ld"
303 #ifdef CONFIG_RTE_CB_ME2
304 # include "rte_me2_cb.ld"