2 * General Purpose functions for the global management of the
3 * 8260 Communication Processor Module.
4 * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
5 * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
8 * 2006 (c) MontaVista Software, Inc.
9 * Vitaly Bordug <vbordug@ru.mvista.com>
10 * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
12 * This file is licensed under the terms of the GNU General Public License
13 * version 2. This program is licensed "as is" without any warranty of any
14 * kind, whether express or implied.
19 * In addition to the individual control of the communication
20 * channels, there are a few functions that globally affect the
21 * communication processor.
23 * Buffer descriptors must be allocated from the dual ported memory
24 * space. The allocator for that is here. When the communication
25 * process is reset, we reclaim the memory available. There is
26 * currently no deallocator for this memory.
28 #include <linux/errno.h>
29 #include <linux/sched.h>
30 #include <linux/kernel.h>
31 #include <linux/param.h>
32 #include <linux/string.h>
34 #include <linux/interrupt.h>
35 #include <linux/module.h>
40 #include <asm/mpc8260.h>
42 #include <asm/pgtable.h>
44 #include <asm/rheap.h>
45 #include <asm/fs_pd.h>
47 #include <sysdev/fsl_soc.h>
49 #ifndef CONFIG_PPC_CPM_NEW_BINDING
50 static void cpm2_dpinit(void);
53 cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
55 /* We allocate this here because it is used almost exclusively for
56 * the communication processor devices.
58 cpm2_map_t __iomem *cpm2_immr;
60 #define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
61 of space for CPM as it is larger
67 #ifdef CONFIG_PPC_85xx
68 cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
70 cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
73 /* Reclaim the DP memory for our use.
75 #ifdef CONFIG_PPC_CPM_NEW_BINDING
81 /* Tell everyone where the comm processor resides.
83 cpmp = &cpm2_immr->im_cpm;
86 static DEFINE_SPINLOCK(cmd_lock);
88 #define MAX_CR_CMD_LOOPS 10000
90 int cpm_command(u32 command, u8 opcode)
95 spin_lock_irqsave(&cmd_lock, flags);
98 out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
99 for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
100 if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
103 printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
106 spin_unlock_irqrestore(&cmd_lock, flags);
109 EXPORT_SYMBOL(cpm_command);
111 /* Set a baud rate generator. This needs lots of work. There are
112 * eight BRGs, which can be connected to the CPM channels or output
113 * as clocks. The BRGs are in two different block of internal
114 * memory mapped space.
115 * The baud rate clock is the system clock divided by something.
116 * It was set up long ago during the initial boot phase and is
118 * Baud rate clocks are zero-based in the driver code (as that maps
119 * to port numbers). Documentation uses 1-based numbering.
121 #define BRG_INT_CLK (get_brgfreq())
122 #define BRG_UART_CLK (BRG_INT_CLK/16)
124 /* This function is used by UARTS, or anything else that uses a 16x
128 cpm_setbrg(uint brg, uint rate)
132 /* This is good enough to get SMCs running.....
135 bp = cpm2_map_size(im_brgc1, 16);
137 bp = cpm2_map_size(im_brgc5, 16);
141 out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
146 /* This function is used to set high speed synchronous baud rate
150 cpm2_fastbrg(uint brg, uint rate, int div16)
156 bp = cpm2_map_size(im_brgc1, 16);
159 bp = cpm2_map_size(im_brgc5, 16);
163 val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
165 val |= CPM_BRG_DIV16;
171 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
176 cpmux_t __iomem *im_cpmux;
181 {CPM_CLK_FCC1, CPM_BRG5, 0},
182 {CPM_CLK_FCC1, CPM_BRG6, 1},
183 {CPM_CLK_FCC1, CPM_BRG7, 2},
184 {CPM_CLK_FCC1, CPM_BRG8, 3},
185 {CPM_CLK_FCC1, CPM_CLK9, 4},
186 {CPM_CLK_FCC1, CPM_CLK10, 5},
187 {CPM_CLK_FCC1, CPM_CLK11, 6},
188 {CPM_CLK_FCC1, CPM_CLK12, 7},
189 {CPM_CLK_FCC2, CPM_BRG5, 0},
190 {CPM_CLK_FCC2, CPM_BRG6, 1},
191 {CPM_CLK_FCC2, CPM_BRG7, 2},
192 {CPM_CLK_FCC2, CPM_BRG8, 3},
193 {CPM_CLK_FCC2, CPM_CLK13, 4},
194 {CPM_CLK_FCC2, CPM_CLK14, 5},
195 {CPM_CLK_FCC2, CPM_CLK15, 6},
196 {CPM_CLK_FCC2, CPM_CLK16, 7},
197 {CPM_CLK_FCC3, CPM_BRG5, 0},
198 {CPM_CLK_FCC3, CPM_BRG6, 1},
199 {CPM_CLK_FCC3, CPM_BRG7, 2},
200 {CPM_CLK_FCC3, CPM_BRG8, 3},
201 {CPM_CLK_FCC3, CPM_CLK13, 4},
202 {CPM_CLK_FCC3, CPM_CLK14, 5},
203 {CPM_CLK_FCC3, CPM_CLK15, 6},
204 {CPM_CLK_FCC3, CPM_CLK16, 7},
205 {CPM_CLK_SCC1, CPM_BRG1, 0},
206 {CPM_CLK_SCC1, CPM_BRG2, 1},
207 {CPM_CLK_SCC1, CPM_BRG3, 2},
208 {CPM_CLK_SCC1, CPM_BRG4, 3},
209 {CPM_CLK_SCC1, CPM_CLK11, 4},
210 {CPM_CLK_SCC1, CPM_CLK12, 5},
211 {CPM_CLK_SCC1, CPM_CLK3, 6},
212 {CPM_CLK_SCC1, CPM_CLK4, 7},
213 {CPM_CLK_SCC2, CPM_BRG1, 0},
214 {CPM_CLK_SCC2, CPM_BRG2, 1},
215 {CPM_CLK_SCC2, CPM_BRG3, 2},
216 {CPM_CLK_SCC2, CPM_BRG4, 3},
217 {CPM_CLK_SCC2, CPM_CLK11, 4},
218 {CPM_CLK_SCC2, CPM_CLK12, 5},
219 {CPM_CLK_SCC2, CPM_CLK3, 6},
220 {CPM_CLK_SCC2, CPM_CLK4, 7},
221 {CPM_CLK_SCC3, CPM_BRG1, 0},
222 {CPM_CLK_SCC3, CPM_BRG2, 1},
223 {CPM_CLK_SCC3, CPM_BRG3, 2},
224 {CPM_CLK_SCC3, CPM_BRG4, 3},
225 {CPM_CLK_SCC3, CPM_CLK5, 4},
226 {CPM_CLK_SCC3, CPM_CLK6, 5},
227 {CPM_CLK_SCC3, CPM_CLK7, 6},
228 {CPM_CLK_SCC3, CPM_CLK8, 7},
229 {CPM_CLK_SCC4, CPM_BRG1, 0},
230 {CPM_CLK_SCC4, CPM_BRG2, 1},
231 {CPM_CLK_SCC4, CPM_BRG3, 2},
232 {CPM_CLK_SCC4, CPM_BRG4, 3},
233 {CPM_CLK_SCC4, CPM_CLK5, 4},
234 {CPM_CLK_SCC4, CPM_CLK6, 5},
235 {CPM_CLK_SCC4, CPM_CLK7, 6},
236 {CPM_CLK_SCC4, CPM_CLK8, 7},
239 im_cpmux = cpm2_map(im_cpmux);
243 reg = &im_cpmux->cmx_scr;
246 reg = &im_cpmux->cmx_scr;
250 reg = &im_cpmux->cmx_scr;
254 reg = &im_cpmux->cmx_scr;
258 reg = &im_cpmux->cmx_fcr;
262 reg = &im_cpmux->cmx_fcr;
266 reg = &im_cpmux->cmx_fcr;
270 printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
274 if (mode == CPM_CLK_RX)
277 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
278 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
279 bits = clk_map[i][2];
283 if (i == ARRAY_SIZE(clk_map))
289 out_be32(reg, (in_be32(reg) & ~mask) | bits);
291 cpm2_unmap(im_cpmux);
295 int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
300 cpmux_t __iomem *im_cpmux;
305 {CPM_CLK_SMC1, CPM_BRG1, 0},
306 {CPM_CLK_SMC1, CPM_BRG7, 1},
307 {CPM_CLK_SMC1, CPM_CLK7, 2},
308 {CPM_CLK_SMC1, CPM_CLK9, 3},
309 {CPM_CLK_SMC2, CPM_BRG2, 0},
310 {CPM_CLK_SMC2, CPM_BRG8, 1},
311 {CPM_CLK_SMC2, CPM_CLK4, 2},
312 {CPM_CLK_SMC2, CPM_CLK15, 3},
315 im_cpmux = cpm2_map(im_cpmux);
319 reg = &im_cpmux->cmx_smr;
324 reg = &im_cpmux->cmx_smr;
329 printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
333 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
334 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
335 bits = clk_map[i][2];
339 if (i == ARRAY_SIZE(clk_map))
345 out_8(reg, (in_8(reg) & ~mask) | bits);
347 cpm2_unmap(im_cpmux);
351 #ifndef CONFIG_PPC_CPM_NEW_BINDING
353 * dpalloc / dpfree bits.
355 static spinlock_t cpm_dpmem_lock;
356 /* 16 blocks should be enough to satisfy all requests
357 * until the memory subsystem goes up... */
358 static rh_block_t cpm_boot_dpmem_rh_block[16];
359 static rh_info_t cpm_dpmem_info;
360 static u8 __iomem *im_dprambase;
362 static void cpm2_dpinit(void)
364 spin_lock_init(&cpm_dpmem_lock);
366 /* initialize the info header */
367 rh_init(&cpm_dpmem_info, 1,
368 sizeof(cpm_boot_dpmem_rh_block) /
369 sizeof(cpm_boot_dpmem_rh_block[0]),
370 cpm_boot_dpmem_rh_block);
372 im_dprambase = cpm2_immr;
374 /* Attach the usable dpmem area */
375 /* XXX: This is actually crap. CPM_DATAONLY_BASE and
376 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
377 * varies with the processor and the microcode patches activated.
378 * But the following should be at least safe.
380 rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
383 /* This function returns an index into the DPRAM area.
385 unsigned long cpm_dpalloc(uint size, uint align)
390 spin_lock_irqsave(&cpm_dpmem_lock, flags);
391 cpm_dpmem_info.alignment = align;
392 start = rh_alloc(&cpm_dpmem_info, size, "commproc");
393 spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
397 EXPORT_SYMBOL(cpm_dpalloc);
399 int cpm_dpfree(unsigned long offset)
404 spin_lock_irqsave(&cpm_dpmem_lock, flags);
405 ret = rh_free(&cpm_dpmem_info, offset);
406 spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
410 EXPORT_SYMBOL(cpm_dpfree);
412 /* not sure if this is ever needed */
413 unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
418 spin_lock_irqsave(&cpm_dpmem_lock, flags);
419 cpm_dpmem_info.alignment = align;
420 start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
421 spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
425 EXPORT_SYMBOL(cpm_dpalloc_fixed);
427 void cpm_dpdump(void)
429 rh_dump(&cpm_dpmem_info);
431 EXPORT_SYMBOL(cpm_dpdump);
433 void *cpm_dpram_addr(unsigned long offset)
435 return (void *)(im_dprambase + offset);
437 EXPORT_SYMBOL(cpm_dpram_addr);
438 #endif /* !CONFIG_PPC_CPM_NEW_BINDING */
440 struct cpm2_ioports {
441 u32 dir, par, sor, odr, dat;
445 void cpm2_set_pin(int port, int pin, int flags)
447 struct cpm2_ioports __iomem *iop =
448 (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
450 pin = 1 << (31 - pin);
452 if (flags & CPM_PIN_OUTPUT)
453 setbits32(&iop[port].dir, pin);
455 clrbits32(&iop[port].dir, pin);
457 if (!(flags & CPM_PIN_GPIO))
458 setbits32(&iop[port].par, pin);
460 clrbits32(&iop[port].par, pin);
462 if (flags & CPM_PIN_SECONDARY)
463 setbits32(&iop[port].sor, pin);
465 clrbits32(&iop[port].sor, pin);
467 if (flags & CPM_PIN_OPENDRAIN)
468 setbits32(&iop[port].odr, pin);
470 clrbits32(&iop[port].odr, pin);