]> err.no Git - linux-2.6/blob - arch/powerpc/platforms/83xx/mpc832x_mds.c
[POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms with QE...
[linux-2.6] / arch / powerpc / platforms / 83xx / mpc832x_mds.c
1 /*
2  * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
3  *
4  * Description:
5  * MPC832xE MDS board specific routines.
6  *
7  * This program is free software; you can redistribute  it and/or modify it
8  * under  the terms of  the GNU General  Public License as published by the
9  * Free Software Foundation;  either version 2 of the  License, or (at your
10  * option) any later version.
11  */
12
13 #include <linux/stddef.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/errno.h>
17 #include <linux/reboot.h>
18 #include <linux/pci.h>
19 #include <linux/kdev_t.h>
20 #include <linux/major.h>
21 #include <linux/console.h>
22 #include <linux/delay.h>
23 #include <linux/seq_file.h>
24 #include <linux/root_dev.h>
25 #include <linux/initrd.h>
26
27 #include <asm/of_device.h>
28 #include <asm/of_platform.h>
29 #include <asm/system.h>
30 #include <asm/atomic.h>
31 #include <asm/time.h>
32 #include <asm/io.h>
33 #include <asm/machdep.h>
34 #include <asm/ipic.h>
35 #include <asm/bootinfo.h>
36 #include <asm/irq.h>
37 #include <asm/prom.h>
38 #include <asm/udbg.h>
39 #include <sysdev/fsl_soc.h>
40 #include <asm/qe.h>
41 #include <asm/qe_ic.h>
42
43 #include "mpc83xx.h"
44
45 #undef DEBUG
46 #ifdef DEBUG
47 #define DBG(fmt...) udbg_printf(fmt)
48 #else
49 #define DBG(fmt...)
50 #endif
51
52 static u8 *bcsr_regs = NULL;
53
54 /* ************************************************************************
55  *
56  * Setup the architecture
57  *
58  */
59 static void __init mpc832x_sys_setup_arch(void)
60 {
61         struct device_node *np;
62
63         if (ppc_md.progress)
64                 ppc_md.progress("mpc832x_sys_setup_arch()", 0);
65
66         /* Map BCSR area */
67         np = of_find_node_by_name(NULL, "bcsr");
68         if (np != 0) {
69                 struct resource res;
70
71                 of_address_to_resource(np, 0, &res);
72                 bcsr_regs = ioremap(res.start, res.end - res.start +1);
73                 of_node_put(np);
74         }
75
76 #ifdef CONFIG_PCI
77         for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
78                 mpc83xx_add_bridge(np);
79         ppc_md.pci_exclude_device = mpc83xx_exclude_device;
80 #endif
81
82 #ifdef CONFIG_QUICC_ENGINE
83         qe_reset();
84
85         if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
86                 par_io_init(np);
87                 of_node_put(np);
88
89                 for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
90                         par_io_of_config(np);
91         }
92
93         if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
94                         != NULL){
95                 /* Reset the Ethernet PHY */
96                 bcsr_regs[9] &= ~0x20;
97                 udelay(1000);
98                 bcsr_regs[9] |= 0x20;
99                 iounmap(bcsr_regs);
100                 of_node_put(np);
101         }
102 #endif                          /* CONFIG_QUICC_ENGINE */
103 }
104
105 static struct of_device_id mpc832x_ids[] = {
106         { .type = "soc", },
107         { .compatible = "soc", },
108         { .type = "qe", },
109         {},
110 };
111
112 static int __init mpc832x_declare_of_platform_devices(void)
113 {
114         if (!machine_is(mpc832x_mds))
115                 return 0;
116
117         /* Publish the QE devices */
118         of_platform_bus_probe(NULL, mpc832x_ids, NULL);
119
120         return 0;
121 }
122 device_initcall(mpc832x_declare_of_platform_devices);
123
124 static void __init mpc832x_sys_init_IRQ(void)
125 {
126         struct device_node *np;
127
128         np = of_find_node_by_type(NULL, "ipic");
129         if (!np)
130                 return;
131
132         ipic_init(np, 0);
133
134         /* Initialize the default interrupt mapping priorities,
135          * in case the boot rom changed something on us.
136          */
137         ipic_set_default_priority();
138         of_node_put(np);
139
140 #ifdef CONFIG_QUICC_ENGINE
141         np = of_find_node_by_type(NULL, "qeic");
142         if (!np)
143                 return;
144
145         qe_ic_init(np, 0);
146         of_node_put(np);
147 #endif                          /* CONFIG_QUICC_ENGINE */
148 }
149
150 #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
151 extern ulong ds1374_get_rtc_time(void);
152 extern int ds1374_set_rtc_time(ulong);
153
154 static int __init mpc832x_rtc_hookup(void)
155 {
156         struct timespec tv;
157
158         if (!machine_is(mpc832x_mds))
159                 return 0;
160
161         ppc_md.get_rtc_time = ds1374_get_rtc_time;
162         ppc_md.set_rtc_time = ds1374_set_rtc_time;
163
164         tv.tv_nsec = 0;
165         tv.tv_sec = (ppc_md.get_rtc_time) ();
166         do_settimeofday(&tv);
167
168         return 0;
169 }
170
171 late_initcall(mpc832x_rtc_hookup);
172 #endif
173
174 /*
175  * Called very early, MMU is off, device-tree isn't unflattened
176  */
177 static int __init mpc832x_sys_probe(void)
178 {
179         unsigned long root = of_get_flat_dt_root();
180
181         return of_flat_dt_is_compatible(root, "MPC832xMDS");
182 }
183
184 define_machine(mpc832x_mds) {
185         .name           = "MPC832x MDS",
186         .probe          = mpc832x_sys_probe,
187         .setup_arch     = mpc832x_sys_setup_arch,
188         .init_IRQ       = mpc832x_sys_init_IRQ,
189         .get_irq        = ipic_get_irq,
190         .restart        = mpc83xx_restart,
191         .time_init      = mpc83xx_time_init,
192         .calibrate_decr = generic_calibrate_decr,
193         .progress       = udbg_progress,
194 };