3 * Common boot and setup code.
5 * Copyright (C) 2001 PPC64 Team, IBM Corp
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
15 #include <linux/config.h>
16 #include <linux/module.h>
17 #include <linux/string.h>
18 #include <linux/sched.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/reboot.h>
22 #include <linux/delay.h>
23 #include <linux/initrd.h>
24 #include <linux/ide.h>
25 #include <linux/seq_file.h>
26 #include <linux/ioport.h>
27 #include <linux/console.h>
28 #include <linux/utsname.h>
29 #include <linux/tty.h>
30 #include <linux/root_dev.h>
31 #include <linux/notifier.h>
32 #include <linux/cpu.h>
33 #include <linux/unistd.h>
34 #include <linux/serial.h>
35 #include <linux/serial_8250.h>
38 #include <asm/processor.h>
39 #include <asm/pgtable.h>
40 #include <asm/bootinfo.h>
43 #include <asm/machdep.h>
45 #include <asm/ppcdebug.h>
47 #include <asm/cputable.h>
48 #include <asm/sections.h>
49 #include <asm/btext.h>
50 #include <asm/nvram.h>
51 #include <asm/setup.h>
52 #include <asm/system.h>
54 #include <asm/iommu.h>
55 #include <asm/serial.h>
56 #include <asm/cache.h>
60 #include <asm/iSeries/ItLpNaca.h>
61 #include <asm/firmware.h>
62 #include <asm/systemcfg.h>
65 #define DBG(fmt...) udbg_printf(fmt)
71 * Here are some early debugging facilities. You can enable one
72 * but your kernel will not boot on anything else if you do so
75 /* This one is for use on LPAR machines that support an HVC console
78 extern void udbg_init_debug_lpar(void);
79 /* This one is for use on Apple G5 machines
81 extern void udbg_init_pmac_realmode(void);
82 /* That's RTAS panel debug */
83 extern void call_rtas_display_status_delay(unsigned char c);
84 /* Here's maple real mode debug */
85 extern void udbg_init_maple_realmode(void);
87 #define EARLY_DEBUG_INIT() do {} while(0)
90 #define EARLY_DEBUG_INIT() udbg_init_debug_lpar()
91 #define EARLY_DEBUG_INIT() udbg_init_maple_realmode()
92 #define EARLY_DEBUG_INIT() udbg_init_pmac_realmode()
93 #define EARLY_DEBUG_INIT() \
94 do { udbg_putc = call_rtas_display_status_delay; } while(0)
97 /* extern void *stab; */
98 extern unsigned long klimit;
100 extern void mm_init_ppc64(void);
101 extern void stab_initialize(unsigned long stab);
102 extern void htab_initialize(void);
103 extern void early_init_devtree(void *flat_dt);
104 extern void unflatten_device_tree(void);
106 extern void smp_release_cpus(void);
110 int boot_cpuid_phys = 0;
114 struct ppc64_caches ppc64_caches;
115 EXPORT_SYMBOL_GPL(ppc64_caches);
118 * These are used in binfmt_elf.c to put aux entries on the stack
119 * for each elf executable being started.
125 /* The main machine-dep calls structure
127 struct machdep_calls ppc_md;
128 EXPORT_SYMBOL(ppc_md);
130 #ifdef CONFIG_MAGIC_SYSRQ
131 unsigned long SYSRQ_KEY;
132 #endif /* CONFIG_MAGIC_SYSRQ */
135 static int ppc64_panic_event(struct notifier_block *, unsigned long, void *);
136 static struct notifier_block ppc64_panic_block = {
137 .notifier_call = ppc64_panic_event,
138 .priority = INT_MIN /* may not return; must be done last */
142 * Perhaps we can put the pmac screen_info[] here
143 * on pmac as well so we don't need the ifdef's.
144 * Until we get multiple-console support in here
146 * Maybe tie it to serial consoles, since this is really what
147 * these processors use on existing boards. -- Dan
149 struct screen_info screen_info = {
152 .orig_video_cols = 80,
153 .orig_video_lines = 25,
154 .orig_video_isVGA = 1,
155 .orig_video_points = 16
160 static int smt_enabled_cmdline;
162 /* Look for ibm,smt-enabled OF option */
163 static void check_smt_enabled(void)
165 struct device_node *dn;
168 /* Allow the command line to overrule the OF option */
169 if (smt_enabled_cmdline)
172 dn = of_find_node_by_path("/options");
175 smt_option = (char *)get_property(dn, "ibm,smt-enabled", NULL);
178 if (!strcmp(smt_option, "on"))
179 smt_enabled_at_boot = 1;
180 else if (!strcmp(smt_option, "off"))
181 smt_enabled_at_boot = 0;
186 /* Look for smt-enabled= cmdline option */
187 static int __init early_smt_enabled(char *p)
189 smt_enabled_cmdline = 1;
194 if (!strcmp(p, "on") || !strcmp(p, "1"))
195 smt_enabled_at_boot = 1;
196 else if (!strcmp(p, "off") || !strcmp(p, "0"))
197 smt_enabled_at_boot = 0;
201 early_param("smt-enabled", early_smt_enabled);
204 * setup_cpu_maps - initialize the following cpu maps:
209 * Having the possible map set up early allows us to restrict allocations
210 * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
212 * We do not initialize the online map here; cpus set their own bits in
213 * cpu_online_map as they come up.
215 * This function is valid only for Open Firmware systems. finish_device_tree
216 * must be called before using this.
218 * While we're here, we may as well set the "physical" cpu ids in the paca.
220 static void __init setup_cpu_maps(void)
222 struct device_node *dn = NULL;
228 while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
230 int j, len = sizeof(u32), nthreads;
232 intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
235 intserv = (u32 *)get_property(dn, "reg", NULL);
237 nthreads = len / sizeof(u32);
239 for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
240 cpu_set(cpu, cpu_present_map);
241 set_hard_smp_processor_id(cpu, intserv[j]);
243 if (intserv[j] == boot_cpuid_phys)
245 cpu_set(cpu, cpu_possible_map);
250 /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
251 * boot cpu is logical 0.
253 if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
255 tmp = get_hard_smp_processor_id(0);
256 set_hard_smp_processor_id(0, boot_cpuid_phys);
257 set_hard_smp_processor_id(swap_cpuid, tmp);
261 * On pSeries LPAR, we need to know how many cpus
262 * could possibly be added to this partition.
264 if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
265 (dn = of_find_node_by_path("/rtas"))) {
266 int num_addr_cell, num_size_cell, maxcpus;
269 num_addr_cell = prom_n_addr_cells(dn);
270 num_size_cell = prom_n_size_cells(dn);
272 ireg = (unsigned int *)
273 get_property(dn, "ibm,lrdr-capacity", NULL);
278 maxcpus = ireg[num_addr_cell + num_size_cell];
280 /* Double maxcpus for processors which have SMT capability */
281 if (cpu_has_feature(CPU_FTR_SMT))
284 if (maxcpus > NR_CPUS) {
286 "Partition configured for %d cpus, "
287 "operating system maximum is %d.\n",
291 printk(KERN_INFO "Partition configured for %d cpus.\n",
294 for (cpu = 0; cpu < maxcpus; cpu++)
295 cpu_set(cpu, cpu_possible_map);
301 * Do the sibling map; assume only two threads per processor.
304 cpu_set(cpu, cpu_sibling_map[cpu]);
305 if (cpu_has_feature(CPU_FTR_SMT))
306 cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
309 systemcfg->processorCount = num_present_cpus();
311 #endif /* CONFIG_SMP */
313 extern struct machdep_calls pSeries_md;
314 extern struct machdep_calls pmac_md;
315 extern struct machdep_calls maple_md;
316 extern struct machdep_calls bpa_md;
317 extern struct machdep_calls iseries_md;
319 /* Ultimately, stuff them in an elf section like initcalls... */
320 static struct machdep_calls __initdata *machines[] = {
321 #ifdef CONFIG_PPC_PSERIES
323 #endif /* CONFIG_PPC_PSERIES */
324 #ifdef CONFIG_PPC_PMAC
326 #endif /* CONFIG_PPC_PMAC */
327 #ifdef CONFIG_PPC_MAPLE
329 #endif /* CONFIG_PPC_MAPLE */
330 #ifdef CONFIG_PPC_BPA
333 #ifdef CONFIG_PPC_ISERIES
340 * Early initialization entry point. This is called by head.S
341 * with MMU translation disabled. We rely on the "feature" of
342 * the CPU that ignores the top 2 bits of the address in real
343 * mode so we can access kernel globals normally provided we
344 * only toy with things in the RMO region. From here, we do
345 * some early parsing of the device-tree to setup out LMB
346 * data structures, and allocate & initialize the hash table
347 * and segment tables so we can start running with translation
350 * It is this function which will call the probe() callback of
351 * the various platform types and copy the matching one to the
352 * global ppc_md structure. Your platform can eventually do
353 * some very early initializations from the probe() routine, but
354 * this is not recommended, be very careful as, for example, the
355 * device-tree is not accessible via normal means at this point.
358 void __init early_setup(unsigned long dt_ptr)
360 struct paca_struct *lpaca = get_paca();
361 static struct machdep_calls **mach;
364 * Enable early debugging if any specified (see top of
369 DBG(" -> early_setup()\n");
372 * Fill the default DBG level (do we want to keep
373 * that old mecanism around forever ?)
378 * Do early initializations using the flattened device
379 * tree, like retreiving the physical memory map or
380 * calculating/retreiving the hash table size
382 early_init_devtree(__va(dt_ptr));
385 * Iterate all ppc_md structures until we find the proper
386 * one for the current machine type
388 DBG("Probing machine type for platform %x...\n",
389 systemcfg->platform);
391 for (mach = machines; *mach; mach++) {
392 if ((*mach)->probe(systemcfg->platform))
395 /* What can we do if we didn't find ? */
397 DBG("No suitable machine found !\n");
402 DBG("Found, Initializing memory management...\n");
405 * Initialize stab / SLB management
407 if (!firmware_has_feature(FW_FEATURE_ISERIES))
408 stab_initialize(lpaca->stab_real);
411 * Initialize the MMU Hash table and create the linear mapping
416 DBG(" <- early_setup()\n");
421 * Initialize some remaining members of the ppc64_caches and systemcfg structures
422 * (at least until we get rid of them completely). This is mostly some
423 * cache informations about the CPU that will be used by cache flush
424 * routines and/or provided to userland
426 static void __init initialize_cache_info(void)
428 struct device_node *np;
429 unsigned long num_cpus = 0;
431 DBG(" -> initialize_cache_info()\n");
433 for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
436 /* We're assuming *all* of the CPUs have the same
437 * d-cache and i-cache sizes... -Peter
440 if ( num_cpus == 1 ) {
445 /* Then read cache informations */
446 if (systemcfg->platform == PLATFORM_POWERMAC) {
447 dc = "d-cache-block-size";
448 ic = "i-cache-block-size";
450 dc = "d-cache-line-size";
451 ic = "i-cache-line-size";
455 lsize = cur_cpu_spec->dcache_bsize;
456 sizep = (u32 *)get_property(np, "d-cache-size", NULL);
459 lsizep = (u32 *) get_property(np, dc, NULL);
462 if (sizep == 0 || lsizep == 0)
463 DBG("Argh, can't find dcache properties ! "
464 "sizep: %p, lsizep: %p\n", sizep, lsizep);
466 systemcfg->dcache_size = ppc64_caches.dsize = size;
467 systemcfg->dcache_line_size =
468 ppc64_caches.dline_size = lsize;
469 ppc64_caches.log_dline_size = __ilog2(lsize);
470 ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
473 lsize = cur_cpu_spec->icache_bsize;
474 sizep = (u32 *)get_property(np, "i-cache-size", NULL);
477 lsizep = (u32 *)get_property(np, ic, NULL);
480 if (sizep == 0 || lsizep == 0)
481 DBG("Argh, can't find icache properties ! "
482 "sizep: %p, lsizep: %p\n", sizep, lsizep);
484 systemcfg->icache_size = ppc64_caches.isize = size;
485 systemcfg->icache_line_size =
486 ppc64_caches.iline_size = lsize;
487 ppc64_caches.log_iline_size = __ilog2(lsize);
488 ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
492 /* Add an eye catcher and the systemcfg layout version number */
493 strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
494 systemcfg->version.major = SYSTEMCFG_MAJOR;
495 systemcfg->version.minor = SYSTEMCFG_MINOR;
496 systemcfg->processor = mfspr(SPRN_PVR);
498 DBG(" <- initialize_cache_info()\n");
501 static void __init check_for_initrd(void)
503 #ifdef CONFIG_BLK_DEV_INITRD
506 DBG(" -> check_for_initrd()\n");
509 prop = (u64 *)get_property(of_chosen,
510 "linux,initrd-start", NULL);
512 initrd_start = (unsigned long)__va(*prop);
513 prop = (u64 *)get_property(of_chosen,
514 "linux,initrd-end", NULL);
516 initrd_end = (unsigned long)__va(*prop);
517 initrd_below_start_ok = 1;
523 /* If we were passed an initrd, set the ROOT_DEV properly if the values
524 * look sensible. If not, clear initrd reference.
526 if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
527 initrd_end > initrd_start)
528 ROOT_DEV = Root_RAM0;
530 initrd_start = initrd_end = 0;
533 printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
535 DBG(" <- check_for_initrd()\n");
536 #endif /* CONFIG_BLK_DEV_INITRD */
540 * Do some initial setup of the system. The parameters are those which
541 * were passed in from the bootloader.
543 void __init setup_system(void)
545 DBG(" -> setup_system()\n");
548 * Unflatten the device-tree passed by prom_init or kexec
550 unflatten_device_tree();
553 * Fill the ppc64_caches & systemcfg structures with informations
554 * retreived from the device-tree. Need to be called before
555 * finish_device_tree() since the later requires some of the
556 * informations filled up here to properly parse the interrupt
558 * It also sets up the cache line sizes which allows to call
559 * routines like flush_icache_range (used by the hash init
562 initialize_cache_info();
564 #ifdef CONFIG_PPC_RTAS
566 * Initialize RTAS if available
569 #endif /* CONFIG_PPC_RTAS */
572 * Check if we have an initrd provided via the device-tree
577 * Do some platform specific early initializations, that includes
578 * setting up the hash table pointers. It also sets up some interrupt-mapping
579 * related options that will be used by finish_device_tree()
584 * "Finish" the device-tree, that is do the actual parsing of
585 * some of the properties like the interrupt map
587 finish_device_tree();
592 #ifdef CONFIG_XMON_DEFAULT
596 * Register early console
598 register_early_udbg_console();
600 /* Save unparsed command line copy for /proc/cmdline */
601 strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
607 * iSeries has already initialized the cpu maps at this point.
611 /* Release secondary cpus out of their spinloops at 0x60 now that
612 * we can map physical -> logical CPU ids
617 printk("Starting Linux PPC64 %s\n", system_utsname.version);
619 printk("-----------------------------------------------------\n");
620 printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
621 printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch);
622 printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller);
623 printk("systemcfg = 0x%p\n", systemcfg);
624 printk("systemcfg->platform = 0x%x\n", systemcfg->platform);
625 printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount);
626 printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize);
627 printk("ppc64_caches.dcache_line_size = 0x%x\n",
628 ppc64_caches.dline_size);
629 printk("ppc64_caches.icache_line_size = 0x%x\n",
630 ppc64_caches.iline_size);
631 printk("htab_address = 0x%p\n", htab_address);
632 printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
633 printk("-----------------------------------------------------\n");
637 DBG(" <- setup_system()\n");
640 /* also used by kexec */
641 void machine_shutdown(void)
643 if (ppc_md.nvram_sync)
647 void machine_restart(char *cmd)
654 printk(KERN_EMERG "System Halted, OK to turn off power\n");
659 void machine_power_off(void)
666 printk(KERN_EMERG "System Halted, OK to turn off power\n");
670 /* Used by the G5 thermal driver */
671 EXPORT_SYMBOL_GPL(machine_power_off);
673 void machine_halt(void)
680 printk(KERN_EMERG "System Halted, OK to turn off power\n");
685 static int ppc64_panic_event(struct notifier_block *this,
686 unsigned long event, void *ptr)
688 ppc_md.panic((char *)ptr); /* May not return */
694 DEFINE_PER_CPU(unsigned int, pvr);
697 static int show_cpuinfo(struct seq_file *m, void *v)
699 unsigned long cpu_id = (unsigned long)v - 1;
704 if (cpu_id == NR_CPUS) {
705 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
707 if (ppc_md.get_cpuinfo != NULL)
708 ppc_md.get_cpuinfo(m);
713 /* We only show online cpus: disable preempt (overzealous, I
714 * knew) to prevent cpu going down. */
716 if (!cpu_online(cpu_id)) {
722 pvr = per_cpu(pvr, cpu_id);
724 pvr = mfspr(SPRN_PVR);
726 maj = (pvr >> 8) & 0xFF;
729 seq_printf(m, "processor\t: %lu\n", cpu_id);
730 seq_printf(m, "cpu\t\t: ");
732 if (cur_cpu_spec->pvr_mask)
733 seq_printf(m, "%s", cur_cpu_spec->cpu_name);
735 seq_printf(m, "unknown (%08x)", pvr);
737 #ifdef CONFIG_ALTIVEC
738 if (cpu_has_feature(CPU_FTR_ALTIVEC))
739 seq_printf(m, ", altivec supported");
740 #endif /* CONFIG_ALTIVEC */
745 * Assume here that all clock rates are the same in a
746 * smp system. -- Cort
748 seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
749 ppc_proc_freq % 1000000);
751 seq_printf(m, "revision\t: %hd.%hd\n\n", maj, min);
757 static void *c_start(struct seq_file *m, loff_t *pos)
759 return *pos <= NR_CPUS ? (void *)((*pos)+1) : NULL;
761 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
764 return c_start(m, pos);
766 static void c_stop(struct seq_file *m, void *v)
769 struct seq_operations cpuinfo_op = {
773 .show = show_cpuinfo,
777 * These three variables are used to save values passed to us by prom_init()
778 * via the device tree. The TCE variables are needed because with a memory_limit
779 * in force we may need to explicitly map the TCE are at the top of RAM.
781 unsigned long memory_limit;
782 unsigned long tce_alloc_start;
783 unsigned long tce_alloc_end;
785 #ifdef CONFIG_PPC_ISERIES
787 * On iSeries we just parse the mem=X option from the command line.
788 * On pSeries it's a bit more complicated, see prom_init_mem()
790 static int __init early_parsemem(char *p)
795 memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
799 early_param("mem", early_parsemem);
800 #endif /* CONFIG_PPC_ISERIES */
802 #ifdef CONFIG_PPC_MULTIPLATFORM
803 static int __init set_preferred_console(void)
805 struct device_node *prom_stdout = NULL;
810 DBG(" -> set_preferred_console()\n");
812 /* The user has requested a console so this is already set up. */
813 if (strstr(saved_command_line, "console=")) {
814 DBG(" console was specified !\n");
819 DBG(" of_chosen is NULL !\n");
822 /* We are getting a weird phandle from OF ... */
823 /* ... So use the full path instead */
824 name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
826 DBG(" no linux,stdout-path !\n");
829 prom_stdout = of_find_node_by_path(name);
831 DBG(" can't find stdout package %s !\n", name);
834 DBG("stdout is %s\n", prom_stdout->full_name);
836 name = (char *)get_property(prom_stdout, "name", NULL);
838 DBG(" stdout package has no name !\n");
841 spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
845 #ifdef CONFIG_SERIAL_8250_CONSOLE
846 else if (strcmp(name, "serial") == 0) {
848 u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
864 /* We dont recognise the serial port */
869 #endif /* CONFIG_SERIAL_8250_CONSOLE */
870 #ifdef CONFIG_PPC_PSERIES
871 else if (strcmp(name, "vty") == 0) {
872 u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
873 char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
875 if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
876 /* Host Virtual Serial Interface */
888 of_node_put(prom_stdout);
889 DBG("Found hvsi console at offset %d\n", offset);
890 return add_preferred_console("hvsi", offset, NULL);
892 /* pSeries LPAR virtual console */
893 of_node_put(prom_stdout);
894 DBG("Found hvc console\n");
895 return add_preferred_console("hvc", 0, NULL);
898 #endif /* CONFIG_PPC_PSERIES */
899 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
900 else if (strcmp(name, "ch-a") == 0)
902 else if (strcmp(name, "ch-b") == 0)
904 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
907 of_node_put(prom_stdout);
909 DBG("Found serial console at ttyS%d\n", offset);
912 static char __initdata opt[16];
913 sprintf(opt, "%d", *spd);
914 return add_preferred_console("ttyS", offset, opt);
916 return add_preferred_console("ttyS", offset, NULL);
919 DBG("No preferred console found !\n");
920 of_node_put(prom_stdout);
923 console_initcall(set_preferred_console);
924 #endif /* CONFIG_PPC_MULTIPLATFORM */
926 #ifdef CONFIG_IRQSTACKS
927 static void __init irqstack_early_init(void)
932 * interrupt stacks must be under 256MB, we cannot afford to take
933 * SLB misses on them.
936 softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
937 THREAD_SIZE, 0x10000000));
938 hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
939 THREAD_SIZE, 0x10000000));
943 #define irqstack_early_init()
947 * Stack space used when we detect a bad kernel stack pointer, and
948 * early in SMP boots before relocation is enabled.
950 static void __init emergency_stack_init(void)
956 * Emergency stacks must be under 256MB, we cannot afford to take
957 * SLB misses on them. The ABI also requires them to be 128-byte
960 * Since we use these as temporary stacks during secondary CPU
961 * bringup, we need to get at them in real mode. This means they
962 * must also be within the RMO region.
964 limit = min(0x10000000UL, lmb.rmo_size);
967 paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128,
972 * Called from setup_arch to initialize the bitmap of available
973 * syscalls in the systemcfg page
975 void __init setup_syscall_map(void)
977 unsigned int i, count64 = 0, count32 = 0;
978 extern unsigned long *sys_call_table;
979 extern unsigned long sys_ni_syscall;
982 for (i = 0; i < __NR_syscalls; i++) {
983 if (sys_call_table[i*2] != sys_ni_syscall) {
985 systemcfg->syscall_map_64[i >> 5] |=
986 0x80000000UL >> (i & 0x1f);
988 if (sys_call_table[i*2+1] != sys_ni_syscall) {
990 systemcfg->syscall_map_32[i >> 5] |=
991 0x80000000UL >> (i & 0x1f);
994 printk(KERN_INFO "Syscall map setup, %d 32-bit and %d 64-bit syscalls\n",
999 * Called into from start_kernel, after lock_kernel has been called.
1000 * Initializes bootmem, which is unsed to manage page allocation until
1001 * mem_init is called.
1003 void __init setup_arch(char **cmdline_p)
1005 extern void do_init_bootmem(void);
1007 ppc64_boot_msg(0x12, "Setup Arch");
1009 *cmdline_p = cmd_line;
1012 * Set cache line size based on type of cpu as a default.
1013 * Systems with OF can look in the properties on the cpu node(s)
1014 * for a possibly more accurate value.
1016 dcache_bsize = ppc64_caches.dline_size;
1017 icache_bsize = ppc64_caches.iline_size;
1019 /* reboot on panic */
1020 panic_timeout = 180;
1023 notifier_chain_register(&panic_notifier_list, &ppc64_panic_block);
1025 init_mm.start_code = PAGE_OFFSET;
1026 init_mm.end_code = (unsigned long) _etext;
1027 init_mm.end_data = (unsigned long) _edata;
1028 init_mm.brk = klimit;
1030 irqstack_early_init();
1031 emergency_stack_init();
1035 /* set up the bootmem stuff with available memory */
1039 /* initialize the syscall map in systemcfg */
1040 setup_syscall_map();
1042 ppc_md.setup_arch();
1044 /* Use the default idle loop if the platform hasn't provided one. */
1045 if (NULL == ppc_md.idle_loop) {
1046 ppc_md.idle_loop = default_idle;
1047 printk(KERN_INFO "Using default idle loop\n");
1051 ppc64_boot_msg(0x15, "Setup Done");
1055 /* ToDo: do something useful if ppc_md is not yet setup. */
1056 #define PPC64_LINUX_FUNCTION 0x0f000000
1057 #define PPC64_IPL_MESSAGE 0xc0000000
1058 #define PPC64_TERM_MESSAGE 0xb0000000
1060 static void ppc64_do_msg(unsigned int src, const char *msg)
1062 if (ppc_md.progress) {
1065 sprintf(buf, "%08X\n", src);
1066 ppc_md.progress(buf, 0);
1067 snprintf(buf, 128, "%s", msg);
1068 ppc_md.progress(buf, 0);
1072 /* Print a boot progress message. */
1073 void ppc64_boot_msg(unsigned int src, const char *msg)
1075 ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
1076 printk("[boot]%04x %s\n", src, msg);
1079 /* Print a termination message (print only -- does not stop the kernel) */
1080 void ppc64_terminate_msg(unsigned int src, const char *msg)
1082 ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg);
1083 printk("[terminate]%04x %s\n", src, msg);
1086 /* This should only be called on processor 0 during calibrate decr */
1087 void __init setup_default_decr(void)
1089 struct paca_struct *lpaca = get_paca();
1091 lpaca->default_decr = tb_ticks_per_jiffy;
1092 lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
1095 #ifndef CONFIG_PPC_ISERIES
1097 * This function can be used by platforms to "find" legacy serial ports.
1098 * It works for "serial" nodes under an "isa" node, and will try to
1099 * respect the "ibm,aix-loc" property if any. It works with up to 8
1103 #define MAX_LEGACY_SERIAL_PORTS 8
1104 static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
1105 static unsigned int old_serial_count;
1107 void __init generic_find_legacy_serial_ports(u64 *physport,
1108 unsigned int *default_speed)
1110 struct device_node *np;
1113 struct isa_reg_property {
1118 struct pci_reg_property {
1119 struct pci_address addr;
1124 DBG(" -> generic_find_legacy_serial_port()\n");
1130 np = of_find_node_by_path("/");
1134 /* First fill our array */
1135 for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
1136 struct device_node *isa, *pci;
1137 struct isa_reg_property *reg;
1138 unsigned long phys_size, addr_size, io_base;
1140 u32 *interrupts, *clk, *spd;
1142 int index, rlen, rentsize;
1144 /* Ok, first check if it's under an "isa" parent */
1145 isa = of_get_parent(np);
1146 if (!isa || strcmp(isa->name, "isa")) {
1147 DBG("%s: no isa parent found\n", np->full_name);
1151 /* Now look for an "ibm,aix-loc" property that gives us ordering
1154 typep = (char *)get_property(np, "ibm,aix-loc", NULL);
1156 /* Get the ISA port number */
1157 reg = (struct isa_reg_property *)get_property(np, "reg", NULL);
1160 /* We assume the interrupt number isn't translated ... */
1161 interrupts = (u32 *)get_property(np, "interrupts", NULL);
1162 /* get clock freq. if present */
1163 clk = (u32 *)get_property(np, "clock-frequency", NULL);
1164 /* get default speed if present */
1165 spd = (u32 *)get_property(np, "current-speed", NULL);
1166 /* Default to locate at end of array */
1167 index = old_serial_count; /* end of the array by default */
1169 /* If we have a location index, then use it */
1170 if (typep && *typep == 'S') {
1171 index = simple_strtol(typep+1, NULL, 0) - 1;
1172 /* if index is out of range, use end of array instead */
1173 if (index >= MAX_LEGACY_SERIAL_PORTS)
1174 index = old_serial_count;
1175 /* if our index is still out of range, that mean that
1176 * array is full, we could scan for a free slot but that
1177 * make little sense to bother, just skip the port
1179 if (index >= MAX_LEGACY_SERIAL_PORTS)
1181 if (index >= old_serial_count)
1182 old_serial_count = index + 1;
1183 /* Check if there is a port who already claimed our slot */
1184 if (serial_ports[index].iobase != 0) {
1185 /* if we still have some room, move it, else override */
1186 if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) {
1187 DBG("Moved legacy port %d -> %d\n", index,
1189 serial_ports[old_serial_count++] =
1190 serial_ports[index];
1192 DBG("Replacing legacy port %d\n", index);
1196 if (index >= MAX_LEGACY_SERIAL_PORTS)
1198 if (index >= old_serial_count)
1199 old_serial_count = index + 1;
1201 /* Now fill the entry */
1202 memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port));
1203 serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16;
1204 serial_ports[index].iobase = reg->address;
1205 serial_ports[index].irq = interrupts ? interrupts[0] : 0;
1206 serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
1208 DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
1210 serial_ports[index].iobase,
1211 serial_ports[index].irq,
1212 serial_ports[index].uartclk);
1214 /* Get phys address of IO reg for port 1 */
1218 pci = of_get_parent(isa);
1220 DBG("%s: no pci parent found\n", np->full_name);
1224 rangesp = (u32 *)get_property(pci, "ranges", &rlen);
1225 if (rangesp == NULL) {
1231 /* we need the #size-cells of the PCI bridge node itself */
1233 sizeprop = (u32 *)get_property(pci, "#size-cells", NULL);
1234 if (sizeprop != NULL)
1235 phys_size = *sizeprop;
1236 /* we need the parent #addr-cells */
1237 addr_size = prom_n_addr_cells(pci);
1238 rentsize = 3 + addr_size + phys_size;
1240 for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) {
1241 if (((rangesp[0] >> 24) & 0x3) != 1)
1242 continue; /* not IO space */
1243 io_base = rangesp[3];
1245 io_base = (io_base << 32) | rangesp[4];
1248 *physport = io_base + reg->address;
1249 if (default_speed && spd)
1250 *default_speed = *spd;
1257 DBG(" <- generic_find_legacy_serial_port()\n");
1260 static struct platform_device serial_device = {
1261 .name = "serial8250",
1262 .id = PLAT8250_DEV_PLATFORM,
1264 .platform_data = serial_ports,
1268 static int __init serial_dev_init(void)
1270 return platform_device_register(&serial_device);
1272 arch_initcall(serial_dev_init);
1274 #endif /* CONFIG_PPC_ISERIES */
1276 int check_legacy_ioport(unsigned long base_port)
1278 if (ppc_md.check_legacy_ioport == NULL)
1280 return ppc_md.check_legacy_ioport(base_port);
1282 EXPORT_SYMBOL(check_legacy_ioport);
1285 static int __init early_xmon(char *p)
1287 /* ensure xmon is enabled */
1289 if (strncmp(p, "on", 2) == 0)
1291 if (strncmp(p, "off", 3) == 0)
1293 if (strncmp(p, "early", 5) != 0)
1301 early_param("xmon", early_xmon);