err.no Git - linux-2.6/blob - arch/powerpc/boot/dts/mpc8641_hpcn.dts

   1 /*
   2  * MPC8641 HPCN Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 / {
  14         model = "MPC8641HPCN";
  15         compatible = "mpc86xx";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         cpus {
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 PowerPC,8641@0 {
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         d-cache-line-size = <20>;       // 32 bytes
  27                         i-cache-line-size = <20>;       // 32 bytes
  28                         d-cache-size = <8000>;          // L1, 32K
  29                         i-cache-size = <8000>;          // L1, 32K
  30                         timebase-frequency = <0>;       // 33 MHz, from uboot
  31                         bus-frequency = <0>;            // From uboot
  32                         clock-frequency = <0>;          // From uboot
  33                 };
  34                 PowerPC,8641@1 {
  35                         device_type = "cpu";
  36                         reg = <1>;
  37                         d-cache-line-size = <20>;       // 32 bytes
  38                         i-cache-line-size = <20>;       // 32 bytes
  39                         d-cache-size = <8000>;          // L1, 32K
  40                         i-cache-size = <8000>;          // L1, 32K
  41                         timebase-frequency = <0>;       // 33 MHz, from uboot
  42                         bus-frequency = <0>;            // From uboot
  43                         clock-frequency = <0>;          // From uboot
  44                 };
  45         };
  46
  47         memory {
  48                 device_type = "memory";
  49                 reg = <00000000 40000000>;      // 1G at 0x0
  50         };
  51
  52         soc8641@f8000000 {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55                 device_type = "soc";
  56                 ranges = <00000000 f8000000 00100000>;
  57                 reg = <f8000000 00001000>;      // CCSRBAR
  58                 bus-frequency = <0>;
  59
  60                 i2c@3000 {
  61                         device_type = "i2c";
  62                         compatible = "fsl-i2c";
  63                         reg = <3000 100>;
  64                         interrupts = <2b 2>;
  65                         interrupt-parent = <&mpic>;
  66                         dfsrr;
  67                 };
  68
  69                 i2c@3100 {
  70                         device_type = "i2c";
  71                         compatible = "fsl-i2c";
  72                         reg = <3100 100>;
  73                         interrupts = <2b 2>;
  74                         interrupt-parent = <&mpic>;
  75                         dfsrr;
  76                 };
  77
  78                 mdio@24520 {
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         device_type = "mdio";
  82                         compatible = "gianfar";
  83                         reg = <24520 20>;
  84                         phy0: ethernet-phy@0 {
  85                                 interrupt-parent = <&mpic>;
  86                                 interrupts = <a 1>;
  87                                 reg = <0>;
  88                                 device_type = "ethernet-phy";
  89                         };
  90                         phy1: ethernet-phy@1 {
  91                                 interrupt-parent = <&mpic>;
  92                                 interrupts = <a 1>;
  93                                 reg = <1>;
  94                                 device_type = "ethernet-phy";
  95                         };
  96                         phy2: ethernet-phy@2 {
  97                                 interrupt-parent = <&mpic>;
  98                                 interrupts = <a 1>;
  99                                 reg = <2>;
 100                                 device_type = "ethernet-phy";
 101                         };
 102                         phy3: ethernet-phy@3 {
 103                                 interrupt-parent = <&mpic>;
 104                                 interrupts = <a 1>;
 105                                 reg = <3>;
 106                                 device_type = "ethernet-phy";
 107                         };
 108                 };
 109
 110                 ethernet@24000 {
 111                         #address-cells = <1>;
 112                         #size-cells = <0>;
 113                         device_type = "network";
 114                         model = "TSEC";
 115                         compatible = "gianfar";
 116                         reg = <24000 1000>;
 117                         /*
 118                          * mac-address is deprecated and will be removed
 119                          * in 2.6.25.  Only recent versions of
 120                          * U-Boot support local-mac-address, however.
 121                          */
 122                         mac-address = [ 00 00 00 00 00 00 ];
 123                         local-mac-address = [ 00 00 00 00 00 00 ];
 124                         interrupts = <1d 2 1e 2 22 2>;
 125                         interrupt-parent = <&mpic>;
 126                         phy-handle = <&phy0>;
 127                         phy-connection-type = "rgmii-id";
 128                 };
 129
 130                 ethernet@25000 {
 131                         #address-cells = <1>;
 132                         #size-cells = <0>;
 133                         device_type = "network";
 134                         model = "TSEC";
 135                         compatible = "gianfar";
 136                         reg = <25000 1000>;
 137                         /*
 138                          * mac-address is deprecated and will be removed
 139                          * in 2.6.25.  Only recent versions of
 140                          * U-Boot support local-mac-address, however.
 141                          */
 142                         mac-address = [ 00 00 00 00 00 00 ];
 143                         local-mac-address = [ 00 00 00 00 00 00 ];
 144                         interrupts = <23 2 24 2 28 2>;
 145                         interrupt-parent = <&mpic>;
 146                         phy-handle = <&phy1>;
 147                         phy-connection-type = "rgmii-id";
 148                 };
 149
 150                 ethernet@26000 {
 151                         #address-cells = <1>;
 152                         #size-cells = <0>;
 153                         device_type = "network";
 154                         model = "TSEC";
 155                         compatible = "gianfar";
 156                         reg = <26000 1000>;
 157                         /*
 158                          * mac-address is deprecated and will be removed
 159                          * in 2.6.25.  Only recent versions of
 160                          * U-Boot support local-mac-address, however.
 161                          */
 162                         mac-address = [ 00 00 00 00 00 00 ];
 163                         local-mac-address = [ 00 00 00 00 00 00 ];
 164                         interrupts = <1F 2 20 2 21 2>;
 165                         interrupt-parent = <&mpic>;
 166                         phy-handle = <&phy2>;
 167                         phy-connection-type = "rgmii-id";
 168                 };
 169
 170                 ethernet@27000 {
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173                         device_type = "network";
 174                         model = "TSEC";
 175                         compatible = "gianfar";
 176                         reg = <27000 1000>;
 177                         /*
 178                          * mac-address is deprecated and will be removed
 179                          * in 2.6.25.  Only recent versions of
 180                          * U-Boot support local-mac-address, however.
 181                          */
 182                         mac-address = [ 00 00 00 00 00 00 ];
 183                         local-mac-address = [ 00 00 00 00 00 00 ];
 184                         interrupts = <25 2 26 2 27 2>;
 185                         interrupt-parent = <&mpic>;
 186                         phy-handle = <&phy3>;
 187                         phy-connection-type = "rgmii-id";
 188                 };
 189                 serial@4500 {
 190                         device_type = "serial";
 191                         compatible = "ns16550";
 192                         reg = <4500 100>;
 193                         clock-frequency = <0>;
 194                         interrupts = <2a 2>;
 195                         interrupt-parent = <&mpic>;
 196                 };
 197
 198                 serial@4600 {
 199                         device_type = "serial";
 200                         compatible = "ns16550";
 201                         reg = <4600 100>;
 202                         clock-frequency = <0>;
 203                         interrupts = <1c 2>;
 204                         interrupt-parent = <&mpic>;
 205                 };
 206
 207                 mpic: pic@40000 {
 208                         clock-frequency = <0>;
 209                         interrupt-controller;
 210                         #address-cells = <0>;
 211                         #interrupt-cells = <2>;
 212                         reg = <40000 40000>;
 213                         compatible = "chrp,open-pic";
 214                         device_type = "open-pic";
 215                         big-endian;
 216                 };
 217         };
 218
 219         pcie@f8008000 {
 220                 compatible = "fsl,mpc8641-pcie";
 221                 device_type = "pci";
 222                 #interrupt-cells = <1>;
 223                 #size-cells = <2>;
 224                 #address-cells = <3>;
 225                 reg = <f8008000 1000>;
 226                 bus-range = <0 ff>;
 227                 ranges = <02000000 0 80000000 80000000 0 20000000
 228                           01000000 0 00000000 e2000000 0 00100000>;
 229                 clock-frequency = <1fca055>;
 230                 interrupt-parent = <&mpic>;
 231                 interrupts = <18 2>;
 232                 interrupt-map-mask = <fb00 0 0 0>;
 233                 interrupt-map = <
 234                         /* IDSEL 0x11 */
 235                         8800 0 0 1 &i8259 9 2
 236                         8800 0 0 2 &i8259 a 2
 237                         8800 0 0 3 &i8259 b 2
 238                         8800 0 0 4 &i8259 c 2
 239
 240                         /* IDSEL 0x12 */
 241                         9000 0 0 1 &i8259 a 2
 242                         9000 0 0 2 &i8259 b 2
 243                         9000 0 0 3 &i8259 c 2
 244                         9000 0 0 4 &i8259 9 2
 245
 246                         // IDSEL 0x1c  USB
 247                         e000 0 0 0 &i8259 c 2
 248                         e100 0 0 0 &i8259 9 2
 249                         e200 0 0 0 &i8259 a 2
 250                         e300 0 0 0 &i8259 b 2
 251
 252                         // IDSEL 0x1d  Audio
 253                         e800 0 0 0 &i8259 6 2
 254
 255                         // IDSEL 0x1e Legacy
 256                         f000 0 0 0 &i8259 7 2
 257                         f100 0 0 0 &i8259 7 2
 258
 259                         // IDSEL 0x1f IDE/SATA
 260                         f800 0 0 0 &i8259 e 2
 261                         f900 0 0 0 &i8259 5 2
 262                         >;
 263
 264                 pcie@0 {
 265                         reg = <0 0 0 0 0>;
 266                         #size-cells = <2>;
 267                         #address-cells = <3>;
 268                         device_type = "pci";
 269                         ranges = <02000000 0 80000000
 270                                   02000000 0 80000000
 271                                   0 20000000
 272
 273                                   01000000 0 00000000
 274                                   01000000 0 00000000
 275                                   0 00100000>;
 276                         uli1575@0 {
 277                                 reg = <0 0 0 0 0>;
 278                                 #size-cells = <2>;
 279                                 #address-cells = <3>;
 280                                 ranges = <02000000 0 80000000
 281                                           02000000 0 80000000
 282                                           0 20000000
 283                                           01000000 0 00000000
 284                                           01000000 0 00000000
 285                                           0 00100000>;
 286                                 isa@1e {
 287                                         device_type = "isa";
 288                                         #interrupt-cells = <2>;
 289                                         #size-cells = <1>;
 290                                         #address-cells = <2>;
 291                                         reg = <f000 0 0 0 0>;
 292                                         ranges = <1 0 01000000 0 0
 293                                                   00001000>;
 294                                         interrupt-parent = <&i8259>;
 295
 296                                         i8259: interrupt-controller@20 {
 297                                                 reg = <1 20 2
 298                                                        1 a0 2
 299                                                        1 4d0 2>;
 300                                                 interrupt-controller;
 301                                                 device_type = "interrupt-controller";
 302                                                 #address-cells = <0>;
 303                                                 #interrupt-cells = <2>;
 304                                                 compatible = "chrp,iic";
 305                                                 interrupts = <9 2>;
 306                                                 interrupt-parent = <&mpic>;
 307                                         };
 308
 309                                         i8042@60 {
 310                                                 #size-cells = <0>;
 311                                                 #address-cells = <1>;
 312                                                 reg = <1 60 1 1 64 1>;
 313                                                 interrupts = <1 3 c 3>;
 314                                                 interrupt-parent =
 315                                                         <&i8259>;
 316
 317                                                 keyboard@0 {
 318                                                         reg = <0>;
 319                                                         compatible = "pnpPNP,303";
 320                                                 };
 321
 322                                                 mouse@1 {
 323                                                         reg = <1>;
 324                                                         compatible = "pnpPNP,f03";
 325                                                 };
 326                                         };
 327
 328                                         rtc@70 {
 329                                                 compatible =
 330                                                         "pnpPNP,b00";
 331                                                 reg = <1 70 2>;
 332                                         };
 333
 334                                         gpio@400 {
 335                                                 reg = <1 400 80>;
 336                                         };
 337                                 };
 338                         };
 339                 };
 340
 341         };
 342
 343         pcie@f8009000 {
 344                 compatible = "fsl,mpc8641-pcie";
 345                 device_type = "pci";
 346                 #interrupt-cells = <1>;
 347                 #size-cells = <2>;
 348                 #address-cells = <3>;
 349                 reg = <f8009000 1000>;
 350                 bus-range = <0 ff>;
 351                 ranges = <02000000 0 a0000000 a0000000 0 20000000
 352                           01000000 0 00000000 e3000000 0 00100000>;
 353                 clock-frequency = <1fca055>;
 354                 interrupt-parent = <&mpic>;
 355                 interrupts = <19 2>;
 356                 interrupt-map-mask = <f800 0 0 7>;
 357                 interrupt-map = <
 358                         /* IDSEL 0x0 */
 359                         0000 0 0 1 &mpic 4 1
 360                         0000 0 0 2 &mpic 5 1
 361                         0000 0 0 3 &mpic 6 1
 362                         0000 0 0 4 &mpic 7 1
 363                         >;
 364                 pcie@0 {
 365                         reg = <0 0 0 0 0>;
 366                         #size-cells = <2>;
 367                         #address-cells = <3>;
 368                         device_type = "pci";
 369                         ranges = <02000000 0 a0000000
 370                                   02000000 0 a0000000
 371                                   0 20000000
 372
 373                                   01000000 0 00000000
 374                                   01000000 0 00000000
 375                                   0 00100000>;
 376                 };
 377         };
 378 };