err.no Git - linux-2.6/blob - arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 /*
  14 /memreserve/    00000000 1000000;
  15 */
  16
  17 / {
  18         model = "MPC8568EMDS";
  19         compatible = "MPC8568EMDS", "MPC85xxMDS";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,8568@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <20>;       // 32 bytes
  31                         i-cache-line-size = <20>;       // 32 bytes
  32                         d-cache-size = <8000>;          // L1, 32K
  33                         i-cache-size = <8000>;          // L1, 32K
  34                         timebase-frequency = <0>;
  35                         bus-frequency = <0>;
  36                         clock-frequency = <0>;
  37                         32-bit;
  38                 };
  39         };
  40
  41         memory {
  42                 device_type = "memory";
  43                 reg = <00000000 10000000>;
  44         };
  45
  46         bcsr@f8000000 {
  47                 device_type = "board-control";
  48                 reg = <f8000000 8000>;
  49         };
  50
  51         soc8568@e0000000 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 #interrupt-cells = <2>;
  55                 device_type = "soc";
  56                 ranges = <0 e0000000 00100000>;
  57                 reg = <e0000000 00100000>;
  58                 bus-frequency = <0>;
  59
  60                 memory-controller@2000 {
  61                         compatible = "fsl,8568-memory-controller";
  62                         reg = <2000 1000>;
  63                         interrupt-parent = <&mpic>;
  64                         interrupts = <12 2>;
  65                 };
  66
  67                 l2-cache-controller@20000 {
  68                         compatible = "fsl,8568-l2-cache-controller";
  69                         reg = <20000 1000>;
  70                         cache-line-size = <20>; // 32 bytes
  71                         cache-size = <80000>;   // L2, 512K
  72                         interrupt-parent = <&mpic>;
  73                         interrupts = <10 2>;
  74                 };
  75
  76                 i2c@3000 {
  77                         device_type = "i2c";
  78                         compatible = "fsl-i2c";
  79                         reg = <3000 100>;
  80                         interrupts = <2b 2>;
  81                         interrupt-parent = <&mpic>;
  82                         dfsrr;
  83                 };
  84
  85                 i2c@3100 {
  86                         device_type = "i2c";
  87                         compatible = "fsl-i2c";
  88                         reg = <3100 100>;
  89                         interrupts = <2b 2>;
  90                         interrupt-parent = <&mpic>;
  91                         dfsrr;
  92                 };
  93
  94                 mdio@24520 {
  95                         #address-cells = <1>;
  96                         #size-cells = <0>;
  97                         device_type = "mdio";
  98                         compatible = "gianfar";
  99                         reg = <24520 20>;
 100                         phy0: ethernet-phy@0 {
 101                                 interrupt-parent = <&mpic>;
 102                                 interrupts = <1 1>;
 103                                 reg = <0>;
 104                                 device_type = "ethernet-phy";
 105                         };
 106                         phy1: ethernet-phy@1 {
 107                                 interrupt-parent = <&mpic>;
 108                                 interrupts = <2 1>;
 109                                 reg = <1>;
 110                                 device_type = "ethernet-phy";
 111                         };
 112                         phy2: ethernet-phy@2 {
 113                                 interrupt-parent = <&mpic>;
 114                                 interrupts = <1 1>;
 115                                 reg = <2>;
 116                                 device_type = "ethernet-phy";
 117                         };
 118                         phy3: ethernet-phy@3 {
 119                                 interrupt-parent = <&mpic>;
 120                                 interrupts = <2 1>;
 121                                 reg = <3>;
 122                                 device_type = "ethernet-phy";
 123                         };
 124                 };
 125
 126                 ethernet@24000 {
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                         device_type = "network";
 130                         model = "eTSEC";
 131                         compatible = "gianfar";
 132                         reg = <24000 1000>;
 133                         /*
 134                          * mac-address is deprecated and will be removed
 135                          * in 2.6.25.  Only recent versions of
 136                          * U-Boot support local-mac-address, however.
 137                          */
 138                         mac-address = [ 00 00 00 00 00 00 ];
 139                         local-mac-address = [ 00 00 00 00 00 00 ];
 140                         interrupts = <1d 2 1e 2 22 2>;
 141                         interrupt-parent = <&mpic>;
 142                         phy-handle = <&phy2>;
 143                 };
 144
 145                 ethernet@25000 {
 146                         #address-cells = <1>;
 147                         #size-cells = <0>;
 148                         device_type = "network";
 149                         model = "eTSEC";
 150                         compatible = "gianfar";
 151                         reg = <25000 1000>;
 152                         /*
 153                          * mac-address is deprecated and will be removed
 154                          * in 2.6.25.  Only recent versions of
 155                          * U-Boot support local-mac-address, however.
 156                          */
 157                         mac-address = [ 00 00 00 00 00 00 ];
 158                         local-mac-address = [ 00 00 00 00 00 00 ];
 159                         interrupts = <23 2 24 2 28 2>;
 160                         interrupt-parent = <&mpic>;
 161                         phy-handle = <&phy3>;
 162                 };
 163
 164                 serial@4500 {
 165                         device_type = "serial";
 166                         compatible = "ns16550";
 167                         reg = <4500 100>;
 168                         clock-frequency = <0>;
 169                         interrupts = <2a 2>;
 170                         interrupt-parent = <&mpic>;
 171                 };
 172
 173                 serial@4600 {
 174                         device_type = "serial";
 175                         compatible = "ns16550";
 176                         reg = <4600 100>;
 177                         clock-frequency = <0>;
 178                         interrupts = <2a 2>;
 179                         interrupt-parent = <&mpic>;
 180                 };
 181
 182                 crypto@30000 {
 183                         device_type = "crypto";
 184                         model = "SEC2";
 185                         compatible = "talitos";
 186                         reg = <30000 f000>;
 187                         interrupts = <2d 2>;
 188                         interrupt-parent = <&mpic>;
 189                         num-channels = <4>;
 190                         channel-fifo-len = <18>;
 191                         exec-units-mask = <000000fe>;
 192                         descriptor-types-mask = <012b0ebf>;
 193                 };
 194
 195                 mpic: pic@40000 {
 196                         clock-frequency = <0>;
 197                         interrupt-controller;
 198                         #address-cells = <0>;
 199                         #interrupt-cells = <2>;
 200                         reg = <40000 40000>;
 201                         built-in;
 202                         compatible = "chrp,open-pic";
 203                         device_type = "open-pic";
 204                         big-endian;
 205                 };
 206                 par_io@e0100 {
 207                         reg = <e0100 100>;
 208                         device_type = "par_io";
 209                         num-ports = <7>;
 210
 211                         pio1: ucc_pin@01 {
 212                                 pio-map = <
 213                         /* port  pin  dir  open_drain  assignment  has_irq */
 214                                         4  0a  1  0  2  0       /* TxD0 */
 215                                         4  09  1  0  2  0       /* TxD1 */
 216                                         4  08  1  0  2  0       /* TxD2 */
 217                                         4  07  1  0  2  0       /* TxD3 */
 218                                         4  17  1  0  2  0       /* TxD4 */
 219                                         4  16  1  0  2  0       /* TxD5 */
 220                                         4  15  1  0  2  0       /* TxD6 */
 221                                         4  14  1  0  2  0       /* TxD7 */
 222                                         4  0f  2  0  2  0       /* RxD0 */
 223                                         4  0e  2  0  2  0       /* RxD1 */
 224                                         4  0d  2  0  2  0       /* RxD2 */
 225                                         4  0c  2  0  2  0       /* RxD3 */
 226                                         4  1d  2  0  2  0       /* RxD4 */
 227                                         4  1c  2  0  2  0       /* RxD5 */
 228                                         4  1b  2  0  2  0       /* RxD6 */
 229                                         4  1a  2  0  2  0       /* RxD7 */
 230                                         4  0b  1  0  2  0       /* TX_EN */
 231                                         4  18  1  0  2  0       /* TX_ER */
 232                                         4  0f  2  0  2  0       /* RX_DV */
 233                                         4  1e  2  0  2  0       /* RX_ER */
 234                                         4  11  2  0  2  0       /* RX_CLK */
 235                                         4  13  1  0  2  0       /* GTX_CLK */
 236                                         1  1f  2  0  3  0>;     /* GTX125 */
 237                         };
 238                         pio2: ucc_pin@02 {
 239                                 pio-map = <
 240                         /* port  pin  dir  open_drain  assignment  has_irq */
 241                                         5  0a 1  0  2  0   /* TxD0 */
 242                                         5  09 1  0  2  0   /* TxD1 */
 243                                         5  08 1  0  2  0   /* TxD2 */
 244                                         5  07 1  0  2  0   /* TxD3 */
 245                                         5  17 1  0  2  0   /* TxD4 */
 246                                         5  16 1  0  2  0   /* TxD5 */
 247                                         5  15 1  0  2  0   /* TxD6 */
 248                                         5  14 1  0  2  0   /* TxD7 */
 249                                         5  0f 2  0  2  0   /* RxD0 */
 250                                         5  0e 2  0  2  0   /* RxD1 */
 251                                         5  0d 2  0  2  0   /* RxD2 */
 252                                         5  0c 2  0  2  0   /* RxD3 */
 253                                         5  1d 2  0  2  0   /* RxD4 */
 254                                         5  1c 2  0  2  0   /* RxD5 */
 255                                         5  1b 2  0  2  0   /* RxD6 */
 256                                         5  1a 2  0  2  0   /* RxD7 */
 257                                         5  0b 1  0  2  0   /* TX_EN */
 258                                         5  18 1  0  2  0   /* TX_ER */
 259                                         5  10 2  0  2  0   /* RX_DV */
 260                                         5  1e 2  0  2  0   /* RX_ER */
 261                                         5  11 2  0  2  0   /* RX_CLK */
 262                                         5  13 1  0  2  0   /* GTX_CLK */
 263                                         1  1f 2  0  3  0   /* GTX125 */
 264                                         4  06 3  0  2  0   /* MDIO */
 265                                         4  05 1  0  2  0>; /* MDC */
 266                         };
 267                 };
 268         };
 269
 270         qe@e0080000 {
 271                 #address-cells = <1>;
 272                 #size-cells = <1>;
 273                 device_type = "qe";
 274                 model = "QE";
 275                 ranges = <0 e0080000 00040000>;
 276                 reg = <e0080000 480>;
 277                 brg-frequency = <0>;
 278                 bus-frequency = <179A7B00>;
 279
 280                 muram@10000 {
 281                         device_type = "muram";
 282                         ranges = <0 00010000 0000c000>;
 283
 284                         data-only@0{
 285                                 reg = <0 c000>;
 286                         };
 287                 };
 288
 289                 spi@4c0 {
 290                         device_type = "spi";
 291                         compatible = "fsl_spi";
 292                         reg = <4c0 40>;
 293                         interrupts = <2>;
 294                         interrupt-parent = <&qeic>;
 295                         mode = "cpu";
 296                 };
 297
 298                 spi@500 {
 299                         device_type = "spi";
 300                         compatible = "fsl_spi";
 301                         reg = <500 40>;
 302                         interrupts = <1>;
 303                         interrupt-parent = <&qeic>;
 304                         mode = "cpu";
 305                 };
 306
 307                 ucc@2000 {
 308                         device_type = "network";
 309                         compatible = "ucc_geth";
 310                         model = "UCC";
 311                         device-id = <1>;
 312                         reg = <2000 200>;
 313                         interrupts = <20>;
 314                         interrupt-parent = <&qeic>;
 315                         /*
 316                          * mac-address is deprecated and will be removed
 317                          * in 2.6.25.  Only recent versions of
 318                          * U-Boot support local-mac-address, however.
 319                          */
 320                         mac-address = [ 00 00 00 00 00 00 ];
 321                         local-mac-address = [ 00 00 00 00 00 00 ];
 322                         rx-clock = <0>;
 323                         tx-clock = <19>;
 324                         phy-handle = <&qe_phy0>;
 325                         phy-connection-type = "gmii";
 326                         pio-handle = <&pio1>;
 327                 };
 328
 329                 ucc@3000 {
 330                         device_type = "network";
 331                         compatible = "ucc_geth";
 332                         model = "UCC";
 333                         device-id = <2>;
 334                         reg = <3000 200>;
 335                         interrupts = <21>;
 336                         interrupt-parent = <&qeic>;
 337                         /*
 338                          * mac-address is deprecated and will be removed
 339                          * in 2.6.25.  Only recent versions of
 340                          * U-Boot support local-mac-address, however.
 341                          */
 342                         mac-address = [ 00 00 00 00 00 00 ];
 343                         local-mac-address = [ 00 00 00 00 00 00 ];
 344                         rx-clock = <0>;
 345                         tx-clock = <14>;
 346                         phy-handle = <&qe_phy1>;
 347                         phy-connection-type = "gmii";
 348                         pio-handle = <&pio2>;
 349                 };
 350
 351                 mdio@2120 {
 352                         #address-cells = <1>;
 353                         #size-cells = <0>;
 354                         reg = <2120 18>;
 355                         device_type = "mdio";
 356                         compatible = "ucc_geth_phy";
 357
 358                         /* These are the same PHYs as on
 359                          * gianfar's MDIO bus */
 360                         qe_phy0: ethernet-phy@00 {
 361                                 interrupt-parent = <&mpic>;
 362                                 interrupts = <1 1>;
 363                                 reg = <0>;
 364                                 device_type = "ethernet-phy";
 365                         };
 366                         qe_phy1: ethernet-phy@01 {
 367                                 interrupt-parent = <&mpic>;
 368                                 interrupts = <2 1>;
 369                                 reg = <1>;
 370                                 device_type = "ethernet-phy";
 371                         };
 372                         qe_phy2: ethernet-phy@02 {
 373                                 interrupt-parent = <&mpic>;
 374                                 interrupts = <1 1>;
 375                                 reg = <2>;
 376                                 device_type = "ethernet-phy";
 377                         };
 378                         qe_phy3: ethernet-phy@03 {
 379                                 interrupt-parent = <&mpic>;
 380                                 interrupts = <2 1>;
 381                                 reg = <3>;
 382                                 device_type = "ethernet-phy";
 383                         };
 384                 };
 385
 386                 qeic: qeic@80 {
 387                         interrupt-controller;
 388                         device_type = "qeic";
 389                         #address-cells = <0>;
 390                         #interrupt-cells = <1>;
 391                         reg = <80 80>;
 392                         built-in;
 393                         big-endian;
 394                         interrupts = <2e 2 2e 2>; //high:30 low:30
 395                         interrupt-parent = <&mpic>;
 396                 };
 397
 398         };
 399 };