err.no Git - linux-2.6/blob - arch/powerpc/boot/dts/mpc8548cds.dts

   1 /*
   2  * MPC8548 CDS Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 / {
  14         model = "MPC8548CDS";
  15         compatible = "MPC8548CDS", "MPC85xxCDS";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         cpus {
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 PowerPC,8548@0 {
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         d-cache-line-size = <20>;       // 32 bytes
  27                         i-cache-line-size = <20>;       // 32 bytes
  28                         d-cache-size = <8000>;          // L1, 32K
  29                         i-cache-size = <8000>;          // L1, 32K
  30                         timebase-frequency = <0>;       //  33 MHz, from uboot
  31                         bus-frequency = <0>;    // 166 MHz
  32                         clock-frequency = <0>;  // 825 MHz, from uboot
  33                         32-bit;
  34                 };
  35         };
  36
  37         memory {
  38                 device_type = "memory";
  39                 reg = <00000000 08000000>;      // 128M at 0x0
  40         };
  41
  42         soc8548@e0000000 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 #interrupt-cells = <2>;
  46                 device_type = "soc";
  47                 ranges = <00001000 e0001000 000ff000
  48                           80000000 80000000 10000000
  49                           e2000000 e2000000 00800000
  50                           90000000 90000000 10000000
  51                           e2800000 e2800000 00800000
  52                           a0000000 a0000000 20000000
  53                           e3000000 e3000000 01000000>;
  54                 reg = <e0000000 00001000>;      // CCSRBAR
  55                 bus-frequency = <0>;
  56
  57                 memory-controller@2000 {
  58                         compatible = "fsl,8548-memory-controller";
  59                         reg = <2000 1000>;
  60                         interrupt-parent = <&mpic>;
  61                         interrupts = <12 2>;
  62                 };
  63
  64                 l2-cache-controller@20000 {
  65                         compatible = "fsl,8548-l2-cache-controller";
  66                         reg = <20000 1000>;
  67                         cache-line-size = <20>; // 32 bytes
  68                         cache-size = <80000>;   // L2, 512K
  69                         interrupt-parent = <&mpic>;
  70                         interrupts = <10 2>;
  71                 };
  72
  73                 i2c@3000 {
  74                         device_type = "i2c";
  75                         compatible = "fsl-i2c";
  76                         reg = <3000 100>;
  77                         interrupts = <2b 2>;
  78                         interrupt-parent = <&mpic>;
  79                         dfsrr;
  80                 };
  81
  82                 mdio@24520 {
  83                         #address-cells = <1>;
  84                         #size-cells = <0>;
  85                         device_type = "mdio";
  86                         compatible = "gianfar";
  87                         reg = <24520 20>;
  88                         phy0: ethernet-phy@0 {
  89                                 interrupt-parent = <&mpic>;
  90                                 interrupts = <5 1>;
  91                                 reg = <0>;
  92                                 device_type = "ethernet-phy";
  93                         };
  94                         phy1: ethernet-phy@1 {
  95                                 interrupt-parent = <&mpic>;
  96                                 interrupts = <5 1>;
  97                                 reg = <1>;
  98                                 device_type = "ethernet-phy";
  99                         };
 100                         phy2: ethernet-phy@2 {
 101                                 interrupt-parent = <&mpic>;
 102                                 interrupts = <5 1>;
 103                                 reg = <2>;
 104                                 device_type = "ethernet-phy";
 105                         };
 106                         phy3: ethernet-phy@3 {
 107                                 interrupt-parent = <&mpic>;
 108                                 interrupts = <5 1>;
 109                                 reg = <3>;
 110                                 device_type = "ethernet-phy";
 111                         };
 112                 };
 113
 114                 ethernet@24000 {
 115                         #address-cells = <1>;
 116                         #size-cells = <0>;
 117                         device_type = "network";
 118                         model = "eTSEC";
 119                         compatible = "gianfar";
 120                         reg = <24000 1000>;
 121                         local-mac-address = [ 00 00 00 00 00 00 ];
 122                         interrupts = <1d 2 1e 2 22 2>;
 123                         interrupt-parent = <&mpic>;
 124                         phy-handle = <&phy0>;
 125                 };
 126
 127                 ethernet@25000 {
 128                         #address-cells = <1>;
 129                         #size-cells = <0>;
 130                         device_type = "network";
 131                         model = "eTSEC";
 132                         compatible = "gianfar";
 133                         reg = <25000 1000>;
 134                         local-mac-address = [ 00 00 00 00 00 00 ];
 135                         interrupts = <23 2 24 2 28 2>;
 136                         interrupt-parent = <&mpic>;
 137                         phy-handle = <&phy1>;
 138                 };
 139
 140 /* eTSEC 3/4 are currently broken
 141                 ethernet@26000 {
 142                         #address-cells = <1>;
 143                         #size-cells = <0>;
 144                         device_type = "network";
 145                         model = "eTSEC";
 146                         compatible = "gianfar";
 147                         reg = <26000 1000>;
 148                         local-mac-address = [ 00 00 00 00 00 00 ];
 149                         interrupts = <1f 2 20 2 21 2>;
 150                         interrupt-parent = <&mpic>;
 151                         phy-handle = <&phy2>;
 152                 };
 153
 154                 ethernet@27000 {
 155                         #address-cells = <1>;
 156                         #size-cells = <0>;
 157                         device_type = "network";
 158                         model = "eTSEC";
 159                         compatible = "gianfar";
 160                         reg = <27000 1000>;
 161                         local-mac-address = [ 00 00 00 00 00 00 ];
 162                         interrupts = <25 2 26 2 27 2>;
 163                         interrupt-parent = <&mpic>;
 164                         phy-handle = <&phy3>;
 165                 };
 166  */
 167
 168                 serial@4500 {
 169                         device_type = "serial";
 170                         compatible = "ns16550";
 171                         reg = <4500 100>;       // reg base, size
 172                         clock-frequency = <0>;  // should we fill in in uboot?
 173                         interrupts = <2a 2>;
 174                         interrupt-parent = <&mpic>;
 175                 };
 176
 177                 serial@4600 {
 178                         device_type = "serial";
 179                         compatible = "ns16550";
 180                         reg = <4600 100>;       // reg base, size
 181                         clock-frequency = <0>;  // should we fill in in uboot?
 182                         interrupts = <2a 2>;
 183                         interrupt-parent = <&mpic>;
 184                 };
 185
 186                 global-utilities@e0000 {        //global utilities reg
 187                         compatible = "fsl,mpc8548-guts";
 188                         reg = <e0000 1000>;
 189                         fsl,has-rstcr;
 190                 };
 191
 192                 pci@8000 {
 193                         interrupt-map-mask = <f800 0 0 7>;
 194                         interrupt-map = <
 195                                 /* IDSEL 0x4 (PCIX Slot 2) */
 196                                 02000 0 0 1 &mpic 0 1
 197                                 02000 0 0 2 &mpic 1 1
 198                                 02000 0 0 3 &mpic 2 1
 199                                 02000 0 0 4 &mpic 3 1
 200
 201                                 /* IDSEL 0x5 (PCIX Slot 3) */
 202                                 02800 0 0 1 &mpic 1 1
 203                                 02800 0 0 2 &mpic 2 1
 204                                 02800 0 0 3 &mpic 3 1
 205                                 02800 0 0 4 &mpic 0 1
 206
 207                                 /* IDSEL 0x6 (PCIX Slot 4) */
 208                                 03000 0 0 1 &mpic 2 1
 209                                 03000 0 0 2 &mpic 3 1
 210                                 03000 0 0 3 &mpic 0 1
 211                                 03000 0 0 4 &mpic 1 1
 212
 213                                 /* IDSEL 0x8 (PCIX Slot 5) */
 214                                 04000 0 0 1 &mpic 0 1
 215                                 04000 0 0 2 &mpic 1 1
 216                                 04000 0 0 3 &mpic 2 1
 217                                 04000 0 0 4 &mpic 3 1
 218
 219                                 /* IDSEL 0xC (Tsi310 bridge) */
 220                                 06000 0 0 1 &mpic 0 1
 221                                 06000 0 0 2 &mpic 1 1
 222                                 06000 0 0 3 &mpic 2 1
 223                                 06000 0 0 4 &mpic 3 1
 224
 225                                 /* IDSEL 0x14 (Slot 2) */
 226                                 0a000 0 0 1 &mpic 0 1
 227                                 0a000 0 0 2 &mpic 1 1
 228                                 0a000 0 0 3 &mpic 2 1
 229                                 0a000 0 0 4 &mpic 3 1
 230
 231                                 /* IDSEL 0x15 (Slot 3) */
 232                                 0a800 0 0 1 &mpic 1 1
 233                                 0a800 0 0 2 &mpic 2 1
 234                                 0a800 0 0 3 &mpic 3 1
 235                                 0a800 0 0 4 &mpic 0 1
 236
 237                                 /* IDSEL 0x16 (Slot 4) */
 238                                 0b000 0 0 1 &mpic 2 1
 239                                 0b000 0 0 2 &mpic 3 1
 240                                 0b000 0 0 3 &mpic 0 1
 241                                 0b000 0 0 4 &mpic 1 1
 242
 243                                 /* IDSEL 0x18 (Slot 5) */
 244                                 0c000 0 0 1 &mpic 0 1
 245                                 0c000 0 0 2 &mpic 1 1
 246                                 0c000 0 0 3 &mpic 2 1
 247                                 0c000 0 0 4 &mpic 3 1
 248
 249                                 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
 250                                 0E000 0 0 1 &mpic 0 1
 251                                 0E000 0 0 2 &mpic 1 1
 252                                 0E000 0 0 3 &mpic 2 1
 253                                 0E000 0 0 4 &mpic 3 1>;
 254
 255                         interrupt-parent = <&mpic>;
 256                         interrupts = <18 2>;
 257                         bus-range = <0 0>;
 258                         ranges = <02000000 0 80000000 80000000 0 10000000
 259                                   01000000 0 00000000 e2000000 0 00800000>;
 260                         clock-frequency = <3f940aa>;
 261                         #interrupt-cells = <1>;
 262                         #size-cells = <2>;
 263                         #address-cells = <3>;
 264                         reg = <8000 1000>;
 265                         compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 266                         device_type = "pci";
 267
 268                         pci_bridge@1c {
 269                                 interrupt-map-mask = <f800 0 0 7>;
 270                                 interrupt-map = <
 271
 272                                         /* IDSEL 0x00 (PrPMC Site) */
 273                                         0000 0 0 1 &mpic 0 1
 274                                         0000 0 0 2 &mpic 1 1
 275                                         0000 0 0 3 &mpic 2 1
 276                                         0000 0 0 4 &mpic 3 1
 277
 278                                         /* IDSEL 0x04 (VIA chip) */
 279                                         2000 0 0 1 &mpic 0 1
 280                                         2000 0 0 2 &mpic 1 1
 281                                         2000 0 0 3 &mpic 2 1
 282                                         2000 0 0 4 &mpic 3 1
 283
 284                                         /* IDSEL 0x05 (8139) */
 285                                         2800 0 0 1 &mpic 1 1
 286
 287                                         /* IDSEL 0x06 (Slot 6) */
 288                                         3000 0 0 1 &mpic 2 1
 289                                         3000 0 0 2 &mpic 3 1
 290                                         3000 0 0 3 &mpic 0 1
 291                                         3000 0 0 4 &mpic 1 1
 292
 293                                         /* IDESL 0x07 (Slot 7) */
 294                                         3800 0 0 1 &mpic 3 1
 295                                         3800 0 0 2 &mpic 0 1
 296                                         3800 0 0 3 &mpic 1 1
 297                                         3800 0 0 4 &mpic 2 1>;
 298
 299                                 reg = <e000 0 0 0 0>;
 300                                 #interrupt-cells = <1>;
 301                                 #size-cells = <2>;
 302                                 #address-cells = <3>;
 303                                 ranges = <02000000 0 80000000
 304                                           02000000 0 80000000
 305                                           0 20000000
 306                                           01000000 0 00000000
 307                                           01000000 0 00000000
 308                                           0 00080000>;
 309                                 clock-frequency = <1fca055>;
 310
 311                                 isa@4 {
 312                                         device_type = "isa";
 313                                         #interrupt-cells = <2>;
 314                                         #size-cells = <1>;
 315                                         #address-cells = <2>;
 316                                         reg = <2000 0 0 0 0>;
 317                                         ranges = <1 0 01000000 0 0 00001000>;
 318                                         interrupt-parent = <&i8259>;
 319
 320                                         i8259: interrupt-controller@20 {
 321                                                 clock-frequency = <0>;
 322                                                 interrupt-controller;
 323                                                 device_type = "interrupt-controller";
 324                                                 reg = <1 20 2
 325                                                        1 a0 2
 326                                                        1 4d0 2>;
 327                                                 #address-cells = <0>;
 328                                                 #interrupt-cells = <2>;
 329                                                 built-in;
 330                                                 compatible = "chrp,iic";
 331                                                 interrupts = <0 1>;
 332                                                 interrupt-parent = <&mpic>;
 333                                         };
 334
 335                                         rtc@70 {
 336                                                 compatible = "pnpPNP,b00";
 337                                                 reg = <1 70 2>;
 338                                         };
 339                                 };
 340                         };
 341                 };
 342
 343                 pci@9000 {
 344                         interrupt-map-mask = <f800 0 0 7>;
 345                         interrupt-map = <
 346
 347                                 /* IDSEL 0x15 */
 348                                 a800 0 0 1 &mpic b 1
 349                                 a800 0 0 2 &mpic 1 1
 350                                 a800 0 0 3 &mpic 2 1
 351                                 a800 0 0 4 &mpic 3 1>;
 352
 353                         interrupt-parent = <&mpic>;
 354                         interrupts = <19 2>;
 355                         bus-range = <0 0>;
 356                         ranges = <02000000 0 90000000 90000000 0 10000000
 357                                   01000000 0 00000000 e2800000 0 00800000>;
 358                         clock-frequency = <3f940aa>;
 359                         #interrupt-cells = <1>;
 360                         #size-cells = <2>;
 361                         #address-cells = <3>;
 362                         reg = <9000 1000>;
 363                         compatible = "fsl,mpc8540-pci";
 364                         device_type = "pci";
 365                 };
 366                 /* PCI Express */
 367                 pcie@a000 {
 368                         interrupt-map-mask = <f800 0 0 7>;
 369                         interrupt-map = <
 370
 371                                 /* IDSEL 0x0 (PEX) */
 372                                 00000 0 0 1 &mpic 0 1
 373                                 00000 0 0 2 &mpic 1 1
 374                                 00000 0 0 3 &mpic 2 1
 375                                 00000 0 0 4 &mpic 3 1>;
 376
 377                         interrupt-parent = <&mpic>;
 378                         interrupts = <1a 2>;
 379                         bus-range = <0 ff>;
 380                         ranges = <02000000 0 a0000000 a0000000 0 20000000
 381                                   01000000 0 00000000 e3000000 0 08000000>;
 382                         clock-frequency = <1fca055>;
 383                         #interrupt-cells = <1>;
 384                         #size-cells = <2>;
 385                         #address-cells = <3>;
 386                         reg = <a000 1000>;
 387                         compatible = "fsl,mpc8548-pcie";
 388                         device_type = "pci";
 389                 };
 390
 391                 mpic: pic@40000 {
 392                         clock-frequency = <0>;
 393                         interrupt-controller;
 394                         #address-cells = <0>;
 395                         #interrupt-cells = <2>;
 396                         reg = <40000 40000>;
 397                         built-in;
 398                         compatible = "chrp,open-pic";
 399                         device_type = "open-pic";
 400                         big-endian;
 401                 };
 402         };
 403 };