err.no Git - linux-2.6/blob - arch/powerpc/boot/dts/mpc8272ads.dts

   1 /*
   2  * MPC8272 ADS Device Tree Source
   3  *
   4  * Copyright 2005 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 / {
  13        model = "MPC8272ADS";
  14        compatible = "MPC8260ADS";
  15        #address-cells = <1>;
  16        #size-cells = <1>;
  17
  18        cpus {
  19                #address-cells = <1>;
  20                #size-cells = <0>;
  21
  22                PowerPC,8272@0 {
  23                        device_type = "cpu";
  24                        reg = <0>;
  25                        d-cache-line-size = <20>;       // 32 bytes
  26                        i-cache-line-size = <20>;       // 32 bytes
  27                        d-cache-size = <4000>;          // L1, 16K
  28                        i-cache-size = <4000>;          // L1, 16K
  29                        timebase-frequency = <0>;
  30                        bus-frequency = <0>;
  31                        clock-frequency = <0>;
  32                        32-bit;
  33                };
  34        };
  35
  36                 pci_pic: interrupt-controller@f8200000 {
  37                #address-cells = <0>;
  38                #interrupt-cells = <2>;
  39                interrupt-controller;
  40                reg = <f8200000 f8200004>;
  41                built-in;
  42                device_type = "pci-pic";
  43        };
  44        memory {
  45                device_type = "memory";
  46                reg = <00000000 4000000 f4500000 00000020>;
  47        };
  48
  49        chosen {
  50                name = "chosen";
  51                linux,platform = <0>;
  52                 interrupt-controller = <&Cpm_pic>;
  53        };
  54
  55        soc8272@f0000000 {
  56                #address-cells = <1>;
  57                #size-cells = <1>;
  58                #interrupt-cells = <2>;
  59                device_type = "soc";
  60                ranges = <00000000 f0000000 00053000>;
  61                reg = <f0000000 10000>;
  62
  63                mdio@0 {
  64                        device_type = "mdio";
  65                        compatible = "fs_enet";
  66                        reg = <0 0>;
  67                        #address-cells = <1>;
  68                        #size-cells = <0>;
  69                         phy0:ethernet-phy@0 {
  70                                 interrupt-parent = <&Cpm_pic>;
  71                                interrupts = <17 4>;
  72                                reg = <0>;
  73                                bitbang = [ 12 12 13 02 02 01 ];
  74                                device_type = "ethernet-phy";
  75                        };
  76                         phy1:ethernet-phy@1 {
  77                                 interrupt-parent = <&Cpm_pic>;
  78                                interrupts = <17 4>;
  79                                bitbang = [ 12 12 13 02 02 01 ];
  80                                reg = <3>;
  81                                device_type = "ethernet-phy";
  82                        };
  83                };
  84
  85                ethernet@24000 {
  86                        #address-cells = <1>;
  87                        #size-cells = <0>;
  88                        device_type = "network";
  89                        device-id = <1>;
  90                        compatible = "fs_enet";
  91                        model = "FCC";
  92                        reg = <11300 20 8400 100 11380 30>;
  93                        mac-address = [ 00 11 2F 99 43 54 ];
  94                        interrupts = <20 2>;
  95                         interrupt-parent = <&Cpm_pic>;
  96                         phy-handle = <&Phy0>;
  97                        rx-clock = <13>;
  98                        tx-clock = <12>;
  99                };
 100
 101                ethernet@25000 {
 102                        device_type = "network";
 103                        device-id = <2>;
 104                        compatible = "fs_enet";
 105                        model = "FCC";
 106                        reg = <11320 20 8500 100 113b0 30>;
 107                        mac-address = [ 00 11 2F 99 44 54 ];
 108                        interrupts = <21 2>;
 109                         interrupt-parent = <&Cpm_pic>;
 110                         phy-handle = <&Phy1>;
 111                        rx-clock = <17>;
 112                        tx-clock = <18>;
 113                };
 114
 115                cpm@f0000000 {
 116                        #address-cells = <1>;
 117                        #size-cells = <1>;
 118                        #interrupt-cells = <2>;
 119                        device_type = "cpm";
 120                        model = "CPM2";
 121                        ranges = <00000000 00000000 20000>;
 122                        reg = <0 20000>;
 123                        command-proc = <119c0>;
 124                        brg-frequency = <17D7840>;
 125                        cpm_clk = <BEBC200>;
 126
 127                        scc@11a00 {
 128                                device_type = "serial";
 129                                compatible = "cpm_uart";
 130                                model = "SCC";
 131                                device-id = <1>;
 132                                reg = <11a00 20 8000 100>;
 133                                current-speed = <1c200>;
 134                                interrupts = <28 2>;
 135                                 interrupt-parent = <&Cpm_pic>;
 136                                clock-setup = <0 00ffffff>;
 137                                rx-clock = <1>;
 138                                tx-clock = <1>;
 139                        };
 140
 141                        scc@11a60 {
 142                                device_type = "serial";
 143                                compatible = "cpm_uart";
 144                                model = "SCC";
 145                                device-id = <4>;
 146                                reg = <11a60 20 8300 100>;
 147                                current-speed = <1c200>;
 148                                interrupts = <2b 2>;
 149                                 interrupt-parent = <&Cpm_pic>;
 150                                clock-setup = <1b ffffff00>;
 151                                rx-clock = <4>;
 152                                tx-clock = <4>;
 153                        };
 154
 155                };
 156                         cpm_pic:interrupt-controller@10c00 {
 157                        #address-cells = <0>;
 158                        #interrupt-cells = <2>;
 159                        interrupt-controller;
 160                        reg = <10c00 80>;
 161                        built-in;
 162                        device_type = "cpm-pic";
 163                        compatible = "CPM2";
 164                };
 165                pci@0500 {
 166                        #interrupt-cells = <1>;
 167                        #size-cells = <2>;
 168                        #address-cells = <3>;
 169                        compatible = "8272";
 170                        device_type = "pci";
 171                        reg = <10430 4dc>;
 172                        clock-frequency = <3f940aa>;
 173                        interrupt-map-mask = <f800 0 0 7>;
 174                        interrupt-map = <
 175
 176                                        /* IDSEL 0x16 */
 177                                         b000 0 0 1 f8200000 40 8
 178                                         b000 0 0 2 f8200000 41 8
 179                                         b000 0 0 3 f8200000 42 8
 180                                         b000 0 0 4 f8200000 43 8
 181
 182                                        /* IDSEL 0x17 */
 183                                         b800 0 0 1 f8200000 43 8
 184                                         b800 0 0 2 f8200000 40 8
 185                                         b800 0 0 3 f8200000 41 8
 186                                         b800 0 0 4 f8200000 42 8
 187
 188                                        /* IDSEL 0x18 */
 189                                         c000 0 0 1 f8200000 42 8
 190                                         c000 0 0 2 f8200000 43 8
 191                                         c000 0 0 3 f8200000 40 8
 192                                         c000 0 0 4 f8200000 41 8>;
 193                         interrupt-parent = <&Cpm_pic>;
 194                        interrupts = <14 8>;
 195                        bus-range = <0 0>;
 196                        ranges = <02000000 0 80000000 80000000 0 40000000
 197                                  01000000 0 00000000 f6000000 0 02000000>;
 198                };
 199
 200 /* May need to remove if on a part without crypto engine */
 201                crypto@30000 {
 202                        device_type = "crypto";
 203                        model = "SEC2";
 204                        compatible = "talitos";
 205                        reg = <30000 10000>;
 206                        interrupts = <b 2>;
 207                         interrupt-parent = <&Cpm_pic>;
 208                        num-channels = <4>;
 209                        channel-fifo-len = <18>;
 210                        exec-units-mask = <0000007e>;
 211 /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
 212                        descriptor-types-mask = <01010ebf>;
 213                };
 214
 215        };
 216 };