2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/config.h>
29 #include <linux/smp_lock.h>
30 #include <linux/mc146818rtc.h>
31 #include <linux/compiler.h>
32 #include <linux/acpi.h>
33 #include <linux/module.h>
34 #include <linux/sysdev.h>
39 #include <asm/timer.h>
40 #include <asm/i8259.h>
42 #include <mach_apic.h>
46 int (*ioapic_renumber_irq)(int ioapic, int irq);
47 atomic_t irq_mis_count;
49 /* Where if anywhere is the i8259 connect in external int mode */
50 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
52 static DEFINE_SPINLOCK(ioapic_lock);
54 int timer_over_8254 __initdata = 1;
57 * Is the SiS APIC rmw bug present ?
58 * -1 = don't know, 0 = no, 1 = yes
60 int sis_apic_bug = -1;
63 * # of IRQ routing registers
65 int nr_ioapic_registers[MAX_IO_APICS];
67 int disable_timer_pin_1 __initdata;
70 * Rough estimation of how many shared IRQs there are, can
73 #define MAX_PLUS_SHARED_IRQS NR_IRQS
74 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
77 * This is performance-critical, we want to do it O(1)
79 * the indexing order of this array favors 1:1 mappings
80 * between pins and IRQs.
83 static struct irq_pin_list {
85 } irq_2_pin[PIN_MAP_SIZE];
87 int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
89 #define vector_to_irq(vector) \
90 (platform_legacy_irq(vector) ? vector : vector_irq[vector])
92 #define vector_to_irq(vector) (vector)
96 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
97 * shared ISA-space IRQs, so we have to support them. We are super
98 * fast in the common case, and fast for shared ISA-space IRQs.
100 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
102 static int first_free_entry = NR_IRQS;
103 struct irq_pin_list *entry = irq_2_pin + irq;
106 entry = irq_2_pin + entry->next;
108 if (entry->pin != -1) {
109 entry->next = first_free_entry;
110 entry = irq_2_pin + entry->next;
111 if (++first_free_entry >= PIN_MAP_SIZE)
112 panic("io_apic.c: whoops");
119 * Reroute an IRQ to a different pin.
121 static void __init replace_pin_at_irq(unsigned int irq,
122 int oldapic, int oldpin,
123 int newapic, int newpin)
125 struct irq_pin_list *entry = irq_2_pin + irq;
128 if (entry->apic == oldapic && entry->pin == oldpin) {
129 entry->apic = newapic;
134 entry = irq_2_pin + entry->next;
138 static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
140 struct irq_pin_list *entry = irq_2_pin + irq;
141 unsigned int pin, reg;
147 reg = io_apic_read(entry->apic, 0x10 + pin*2);
150 io_apic_modify(entry->apic, 0x10 + pin*2, reg);
153 entry = irq_2_pin + entry->next;
158 static void __mask_IO_APIC_irq (unsigned int irq)
160 __modify_IO_APIC_irq(irq, 0x00010000, 0);
164 static void __unmask_IO_APIC_irq (unsigned int irq)
166 __modify_IO_APIC_irq(irq, 0, 0x00010000);
169 /* mask = 1, trigger = 0 */
170 static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
172 __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
175 /* mask = 0, trigger = 1 */
176 static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
178 __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
181 static void mask_IO_APIC_irq (unsigned int irq)
185 spin_lock_irqsave(&ioapic_lock, flags);
186 __mask_IO_APIC_irq(irq);
187 spin_unlock_irqrestore(&ioapic_lock, flags);
190 static void unmask_IO_APIC_irq (unsigned int irq)
194 spin_lock_irqsave(&ioapic_lock, flags);
195 __unmask_IO_APIC_irq(irq);
196 spin_unlock_irqrestore(&ioapic_lock, flags);
199 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
201 struct IO_APIC_route_entry entry;
204 /* Check delivery_mode to be sure we're not clearing an SMI pin */
205 spin_lock_irqsave(&ioapic_lock, flags);
206 *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
207 *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
208 spin_unlock_irqrestore(&ioapic_lock, flags);
209 if (entry.delivery_mode == dest_SMI)
213 * Disable it in the IO-APIC irq-routing table:
215 memset(&entry, 0, sizeof(entry));
217 spin_lock_irqsave(&ioapic_lock, flags);
218 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
219 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
220 spin_unlock_irqrestore(&ioapic_lock, flags);
223 static void clear_IO_APIC (void)
227 for (apic = 0; apic < nr_ioapics; apic++)
228 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
229 clear_IO_APIC_pin(apic, pin);
233 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
237 struct irq_pin_list *entry = irq_2_pin + irq;
238 unsigned int apicid_value;
241 cpus_and(tmp, cpumask, cpu_online_map);
245 cpus_and(cpumask, tmp, CPU_MASK_ALL);
247 apicid_value = cpu_mask_to_apicid(cpumask);
248 /* Prepare to do the io_apic_write */
249 apicid_value = apicid_value << 24;
250 spin_lock_irqsave(&ioapic_lock, flags);
255 io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
258 entry = irq_2_pin + entry->next;
260 set_irq_info(irq, cpumask);
261 spin_unlock_irqrestore(&ioapic_lock, flags);
264 #if defined(CONFIG_IRQBALANCE)
265 # include <asm/processor.h> /* kernel_thread() */
266 # include <linux/kernel_stat.h> /* kstat */
267 # include <linux/slab.h> /* kmalloc() */
268 # include <linux/timer.h> /* time_after() */
270 #ifdef CONFIG_BALANCED_IRQ_DEBUG
271 # define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0)
272 # define Dprintk(x...) do { TDprintk(x); } while (0)
274 # define TDprintk(x...)
275 # define Dprintk(x...)
278 #define IRQBALANCE_CHECK_ARCH -999
279 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ)
280 #define MIN_BALANCED_IRQ_INTERVAL (HZ/2)
281 #define BALANCED_IRQ_MORE_DELTA (HZ/10)
282 #define BALANCED_IRQ_LESS_DELTA (HZ)
284 static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH;
285 static int physical_balance __read_mostly;
286 static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
288 static struct irq_cpu_info {
289 unsigned long * last_irq;
290 unsigned long * irq_delta;
292 } irq_cpu_data[NR_CPUS];
294 #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq)
295 #define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq])
296 #define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq])
298 #define IDLE_ENOUGH(cpu,now) \
299 (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
301 #define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask)
303 #define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i]))
305 static cpumask_t balance_irq_affinity[NR_IRQS] = {
306 [0 ... NR_IRQS-1] = CPU_MASK_ALL
309 void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
311 balance_irq_affinity[irq] = mask;
314 static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
315 unsigned long now, int direction)
323 if (unlikely(cpu == curr_cpu))
326 if (direction == 1) {
335 } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
336 (search_idle && !IDLE_ENOUGH(cpu,now)));
341 static inline void balance_irq(int cpu, int irq)
343 unsigned long now = jiffies;
344 cpumask_t allowed_mask;
345 unsigned int new_cpu;
347 if (irqbalance_disabled)
350 cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
351 new_cpu = move(cpu, allowed_mask, now, 1);
352 if (cpu != new_cpu) {
353 set_pending_irq(irq, cpumask_of_cpu(new_cpu));
357 static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
360 Dprintk("Rotating IRQs among CPUs.\n");
361 for_each_online_cpu(i) {
362 for (j = 0; j < NR_IRQS; j++) {
363 if (!irq_desc[j].action)
365 /* Is it a significant load ? */
366 if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
367 useful_load_threshold)
372 balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
373 balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
377 static void do_irq_balance(void)
380 unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
381 unsigned long move_this_load = 0;
382 int max_loaded = 0, min_loaded = 0;
384 unsigned long useful_load_threshold = balanced_irq_interval + 10;
386 int tmp_loaded, first_attempt = 1;
387 unsigned long tmp_cpu_irq;
388 unsigned long imbalance = 0;
389 cpumask_t allowed_mask, target_cpu_mask, tmp;
391 for_each_possible_cpu(i) {
396 package_index = CPU_TO_PACKAGEINDEX(i);
397 for (j = 0; j < NR_IRQS; j++) {
398 unsigned long value_now, delta;
399 /* Is this an active IRQ? */
400 if (!irq_desc[j].action)
402 if ( package_index == i )
403 IRQ_DELTA(package_index,j) = 0;
404 /* Determine the total count per processor per IRQ */
405 value_now = (unsigned long) kstat_cpu(i).irqs[j];
407 /* Determine the activity per processor per IRQ */
408 delta = value_now - LAST_CPU_IRQ(i,j);
410 /* Update last_cpu_irq[][] for the next time */
411 LAST_CPU_IRQ(i,j) = value_now;
413 /* Ignore IRQs whose rate is less than the clock */
414 if (delta < useful_load_threshold)
416 /* update the load for the processor or package total */
417 IRQ_DELTA(package_index,j) += delta;
419 /* Keep track of the higher numbered sibling as well */
420 if (i != package_index)
423 * We have sibling A and sibling B in the package
425 * cpu_irq[A] = load for cpu A + load for cpu B
426 * cpu_irq[B] = load for cpu B
428 CPU_IRQ(package_index) += delta;
431 /* Find the least loaded processor package */
432 for_each_online_cpu(i) {
433 if (i != CPU_TO_PACKAGEINDEX(i))
435 if (min_cpu_irq > CPU_IRQ(i)) {
436 min_cpu_irq = CPU_IRQ(i);
440 max_cpu_irq = ULONG_MAX;
443 /* Look for heaviest loaded processor.
444 * We may come back to get the next heaviest loaded processor.
445 * Skip processors with trivial loads.
449 for_each_online_cpu(i) {
450 if (i != CPU_TO_PACKAGEINDEX(i))
452 if (max_cpu_irq <= CPU_IRQ(i))
454 if (tmp_cpu_irq < CPU_IRQ(i)) {
455 tmp_cpu_irq = CPU_IRQ(i);
460 if (tmp_loaded == -1) {
461 /* In the case of small number of heavy interrupt sources,
462 * loading some of the cpus too much. We use Ingo's original
463 * approach to rotate them around.
465 if (!first_attempt && imbalance >= useful_load_threshold) {
466 rotate_irqs_among_cpus(useful_load_threshold);
469 goto not_worth_the_effort;
472 first_attempt = 0; /* heaviest search */
473 max_cpu_irq = tmp_cpu_irq; /* load */
474 max_loaded = tmp_loaded; /* processor */
475 imbalance = (max_cpu_irq - min_cpu_irq) / 2;
477 Dprintk("max_loaded cpu = %d\n", max_loaded);
478 Dprintk("min_loaded cpu = %d\n", min_loaded);
479 Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq);
480 Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq);
481 Dprintk("load imbalance = %lu\n", imbalance);
483 /* if imbalance is less than approx 10% of max load, then
484 * observe diminishing returns action. - quit
486 if (imbalance < (max_cpu_irq >> 3)) {
487 Dprintk("Imbalance too trivial\n");
488 goto not_worth_the_effort;
492 /* if we select an IRQ to move that can't go where we want, then
493 * see if there is another one to try.
497 for (j = 0; j < NR_IRQS; j++) {
498 /* Is this an active IRQ? */
499 if (!irq_desc[j].action)
501 if (imbalance <= IRQ_DELTA(max_loaded,j))
503 /* Try to find the IRQ that is closest to the imbalance
504 * without going over.
506 if (move_this_load < IRQ_DELTA(max_loaded,j)) {
507 move_this_load = IRQ_DELTA(max_loaded,j);
511 if (selected_irq == -1) {
515 imbalance = move_this_load;
517 /* For physical_balance case, we accumlated both load
518 * values in the one of the siblings cpu_irq[],
519 * to use the same code for physical and logical processors
520 * as much as possible.
522 * NOTE: the cpu_irq[] array holds the sum of the load for
523 * sibling A and sibling B in the slot for the lowest numbered
524 * sibling (A), _AND_ the load for sibling B in the slot for
525 * the higher numbered sibling.
527 * We seek the least loaded sibling by making the comparison
530 load = CPU_IRQ(min_loaded) >> 1;
531 for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) {
532 if (load > CPU_IRQ(j)) {
533 /* This won't change cpu_sibling_map[min_loaded] */
539 cpus_and(allowed_mask,
541 balance_irq_affinity[selected_irq]);
542 target_cpu_mask = cpumask_of_cpu(min_loaded);
543 cpus_and(tmp, target_cpu_mask, allowed_mask);
545 if (!cpus_empty(tmp)) {
547 Dprintk("irq = %d moved to cpu = %d\n",
548 selected_irq, min_loaded);
549 /* mark for change destination */
550 set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
552 /* Since we made a change, come back sooner to
553 * check for more variation.
555 balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
556 balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
561 not_worth_the_effort:
563 * if we did not find an IRQ to move, then adjust the time interval
566 balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
567 balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
568 Dprintk("IRQ worth rotating not found\n");
572 static int balanced_irq(void *unused)
575 unsigned long prev_balance_time = jiffies;
576 long time_remaining = balanced_irq_interval;
580 /* push everything to CPU 0 to give us a starting point. */
581 for (i = 0 ; i < NR_IRQS ; i++) {
582 pending_irq_cpumask[i] = cpumask_of_cpu(0);
583 set_pending_irq(i, cpumask_of_cpu(0));
587 time_remaining = schedule_timeout_interruptible(time_remaining);
589 if (time_after(jiffies,
590 prev_balance_time+balanced_irq_interval)) {
593 prev_balance_time = jiffies;
594 time_remaining = balanced_irq_interval;
601 static int __init balanced_irq_init(void)
604 struct cpuinfo_x86 *c;
607 cpus_shift_right(tmp, cpu_online_map, 2);
609 /* When not overwritten by the command line ask subarchitecture. */
610 if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
611 irqbalance_disabled = NO_BALANCE_IRQ;
612 if (irqbalance_disabled)
615 /* disable irqbalance completely if there is only one processor online */
616 if (num_online_cpus() < 2) {
617 irqbalance_disabled = 1;
621 * Enable physical balance only if more than 1 physical processor
624 if (smp_num_siblings > 1 && !cpus_empty(tmp))
625 physical_balance = 1;
627 for_each_online_cpu(i) {
628 irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
629 irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
630 if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
631 printk(KERN_ERR "balanced_irq_init: out of memory");
634 memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
635 memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
638 printk(KERN_INFO "Starting balanced_irq\n");
639 if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0)
642 printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
644 for_each_possible_cpu(i) {
645 kfree(irq_cpu_data[i].irq_delta);
646 irq_cpu_data[i].irq_delta = NULL;
647 kfree(irq_cpu_data[i].last_irq);
648 irq_cpu_data[i].last_irq = NULL;
653 int __init irqbalance_disable(char *str)
655 irqbalance_disabled = 1;
659 __setup("noirqbalance", irqbalance_disable);
661 late_initcall(balanced_irq_init);
662 #endif /* CONFIG_IRQBALANCE */
663 #endif /* CONFIG_SMP */
666 void fastcall send_IPI_self(int vector)
673 apic_wait_icr_idle();
674 cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
676 * Send the IPI. The write to APIC_ICR fires this off.
678 apic_write_around(APIC_ICR, cfg);
680 #endif /* !CONFIG_SMP */
684 * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
685 * specific CPU-side IRQs.
689 static int pirq_entries [MAX_PIRQS];
690 static int pirqs_enabled;
691 int skip_ioapic_setup;
693 static int __init ioapic_setup(char *str)
695 skip_ioapic_setup = 1;
699 __setup("noapic", ioapic_setup);
701 static int __init ioapic_pirq_setup(char *str)
704 int ints[MAX_PIRQS+1];
706 get_options(str, ARRAY_SIZE(ints), ints);
708 for (i = 0; i < MAX_PIRQS; i++)
709 pirq_entries[i] = -1;
712 apic_printk(APIC_VERBOSE, KERN_INFO
713 "PIRQ redirection, working around broken MP-BIOS.\n");
715 if (ints[0] < MAX_PIRQS)
718 for (i = 0; i < max; i++) {
719 apic_printk(APIC_VERBOSE, KERN_DEBUG
720 "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
722 * PIRQs are mapped upside down, usually.
724 pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
729 __setup("pirq=", ioapic_pirq_setup);
732 * Find the IRQ entry number of a certain pin.
734 static int find_irq_entry(int apic, int pin, int type)
738 for (i = 0; i < mp_irq_entries; i++)
739 if (mp_irqs[i].mpc_irqtype == type &&
740 (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
741 mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
742 mp_irqs[i].mpc_dstirq == pin)
749 * Find the pin to which IRQ[irq] (ISA) is connected
751 static int __init find_isa_irq_pin(int irq, int type)
755 for (i = 0; i < mp_irq_entries; i++) {
756 int lbus = mp_irqs[i].mpc_srcbus;
758 if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
759 mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
760 mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
761 mp_bus_id_to_type[lbus] == MP_BUS_NEC98
763 (mp_irqs[i].mpc_irqtype == type) &&
764 (mp_irqs[i].mpc_srcbusirq == irq))
766 return mp_irqs[i].mpc_dstirq;
771 static int __init find_isa_irq_apic(int irq, int type)
775 for (i = 0; i < mp_irq_entries; i++) {
776 int lbus = mp_irqs[i].mpc_srcbus;
778 if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
779 mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
780 mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
781 mp_bus_id_to_type[lbus] == MP_BUS_NEC98
783 (mp_irqs[i].mpc_irqtype == type) &&
784 (mp_irqs[i].mpc_srcbusirq == irq))
787 if (i < mp_irq_entries) {
789 for(apic = 0; apic < nr_ioapics; apic++) {
790 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
799 * Find a specific PCI IRQ entry.
800 * Not an __init, possibly needed by modules
802 static int pin_2_irq(int idx, int apic, int pin);
804 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
806 int apic, i, best_guess = -1;
808 apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
809 "slot:%d, pin:%d.\n", bus, slot, pin);
810 if (mp_bus_id_to_pci_bus[bus] == -1) {
811 printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
814 for (i = 0; i < mp_irq_entries; i++) {
815 int lbus = mp_irqs[i].mpc_srcbus;
817 for (apic = 0; apic < nr_ioapics; apic++)
818 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
819 mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
822 if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
823 !mp_irqs[i].mpc_irqtype &&
825 (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
826 int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
828 if (!(apic || IO_APIC_IRQ(irq)))
831 if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
834 * Use the first all-but-pin matching entry as a
835 * best-guess fuzzy result for broken mptables.
843 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
846 * This function currently is only a helper for the i386 smp boot process where
847 * we need to reprogram the ioredtbls to cater for the cpus which have come online
848 * so mask in all cases should simply be TARGET_CPUS
851 void __init setup_ioapic_dest(void)
853 int pin, ioapic, irq, irq_entry;
855 if (skip_ioapic_setup == 1)
858 for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
859 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
860 irq_entry = find_irq_entry(ioapic, pin, mp_INT);
863 irq = pin_2_irq(irq_entry, ioapic, pin);
864 set_ioapic_affinity_irq(irq, TARGET_CPUS);
872 * EISA Edge/Level control register, ELCR
874 static int EISA_ELCR(unsigned int irq)
877 unsigned int port = 0x4d0 + (irq >> 3);
878 return (inb(port) >> (irq & 7)) & 1;
880 apic_printk(APIC_VERBOSE, KERN_INFO
881 "Broken MPtable reports ISA irq %d\n", irq);
885 /* EISA interrupts are always polarity zero and can be edge or level
886 * trigger depending on the ELCR value. If an interrupt is listed as
887 * EISA conforming in the MP table, that means its trigger type must
888 * be read in from the ELCR */
890 #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
891 #define default_EISA_polarity(idx) (0)
893 /* ISA interrupts are always polarity zero edge triggered,
894 * when listed as conforming in the MP table. */
896 #define default_ISA_trigger(idx) (0)
897 #define default_ISA_polarity(idx) (0)
899 /* PCI interrupts are always polarity one level triggered,
900 * when listed as conforming in the MP table. */
902 #define default_PCI_trigger(idx) (1)
903 #define default_PCI_polarity(idx) (1)
905 /* MCA interrupts are always polarity zero level triggered,
906 * when listed as conforming in the MP table. */
908 #define default_MCA_trigger(idx) (1)
909 #define default_MCA_polarity(idx) (0)
911 /* NEC98 interrupts are always polarity zero edge triggered,
912 * when listed as conforming in the MP table. */
914 #define default_NEC98_trigger(idx) (0)
915 #define default_NEC98_polarity(idx) (0)
917 static int __init MPBIOS_polarity(int idx)
919 int bus = mp_irqs[idx].mpc_srcbus;
923 * Determine IRQ line polarity (high active or low active):
925 switch (mp_irqs[idx].mpc_irqflag & 3)
927 case 0: /* conforms, ie. bus-type dependent polarity */
929 switch (mp_bus_id_to_type[bus])
931 case MP_BUS_ISA: /* ISA pin */
933 polarity = default_ISA_polarity(idx);
936 case MP_BUS_EISA: /* EISA pin */
938 polarity = default_EISA_polarity(idx);
941 case MP_BUS_PCI: /* PCI pin */
943 polarity = default_PCI_polarity(idx);
946 case MP_BUS_MCA: /* MCA pin */
948 polarity = default_MCA_polarity(idx);
951 case MP_BUS_NEC98: /* NEC 98 pin */
953 polarity = default_NEC98_polarity(idx);
958 printk(KERN_WARNING "broken BIOS!!\n");
965 case 1: /* high active */
970 case 2: /* reserved */
972 printk(KERN_WARNING "broken BIOS!!\n");
976 case 3: /* low active */
981 default: /* invalid */
983 printk(KERN_WARNING "broken BIOS!!\n");
991 static int MPBIOS_trigger(int idx)
993 int bus = mp_irqs[idx].mpc_srcbus;
997 * Determine IRQ trigger mode (edge or level sensitive):
999 switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
1001 case 0: /* conforms, ie. bus-type dependent */
1003 switch (mp_bus_id_to_type[bus])
1005 case MP_BUS_ISA: /* ISA pin */
1007 trigger = default_ISA_trigger(idx);
1010 case MP_BUS_EISA: /* EISA pin */
1012 trigger = default_EISA_trigger(idx);
1015 case MP_BUS_PCI: /* PCI pin */
1017 trigger = default_PCI_trigger(idx);
1020 case MP_BUS_MCA: /* MCA pin */
1022 trigger = default_MCA_trigger(idx);
1025 case MP_BUS_NEC98: /* NEC 98 pin */
1027 trigger = default_NEC98_trigger(idx);
1032 printk(KERN_WARNING "broken BIOS!!\n");
1044 case 2: /* reserved */
1046 printk(KERN_WARNING "broken BIOS!!\n");
1055 default: /* invalid */
1057 printk(KERN_WARNING "broken BIOS!!\n");
1065 static inline int irq_polarity(int idx)
1067 return MPBIOS_polarity(idx);
1070 static inline int irq_trigger(int idx)
1072 return MPBIOS_trigger(idx);
1075 static int pin_2_irq(int idx, int apic, int pin)
1078 int bus = mp_irqs[idx].mpc_srcbus;
1081 * Debugging check, we are in big trouble if this message pops up!
1083 if (mp_irqs[idx].mpc_dstirq != pin)
1084 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
1086 switch (mp_bus_id_to_type[bus])
1088 case MP_BUS_ISA: /* ISA pin */
1093 irq = mp_irqs[idx].mpc_srcbusirq;
1096 case MP_BUS_PCI: /* PCI pin */
1099 * PCI IRQs are mapped in order
1103 irq += nr_ioapic_registers[i++];
1107 * For MPS mode, so far only needed by ES7000 platform
1109 if (ioapic_renumber_irq)
1110 irq = ioapic_renumber_irq(apic, irq);
1116 printk(KERN_ERR "unknown bus type %d.\n",bus);
1123 * PCI IRQ command line redirection. Yes, limits are hardcoded.
1125 if ((pin >= 16) && (pin <= 23)) {
1126 if (pirq_entries[pin-16] != -1) {
1127 if (!pirq_entries[pin-16]) {
1128 apic_printk(APIC_VERBOSE, KERN_DEBUG
1129 "disabling PIRQ%d\n", pin-16);
1131 irq = pirq_entries[pin-16];
1132 apic_printk(APIC_VERBOSE, KERN_DEBUG
1133 "using PIRQ%d -> IRQ %d\n",
1141 static inline int IO_APIC_irq_trigger(int irq)
1145 for (apic = 0; apic < nr_ioapics; apic++) {
1146 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1147 idx = find_irq_entry(apic,pin,mp_INT);
1148 if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
1149 return irq_trigger(idx);
1153 * nonexistent IRQs are edge default
1158 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
1159 u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
1161 int assign_irq_vector(int irq)
1163 static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
1165 BUG_ON(irq >= NR_IRQ_VECTORS);
1166 if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
1167 return IO_APIC_VECTOR(irq);
1169 current_vector += 8;
1170 if (current_vector == SYSCALL_VECTOR)
1173 if (current_vector >= FIRST_SYSTEM_VECTOR) {
1177 current_vector = FIRST_DEVICE_VECTOR + offset;
1180 vector_irq[current_vector] = irq;
1181 if (irq != AUTO_ASSIGN)
1182 IO_APIC_VECTOR(irq) = current_vector;
1184 return current_vector;
1187 static struct hw_interrupt_type ioapic_level_type;
1188 static struct hw_interrupt_type ioapic_edge_type;
1190 #define IOAPIC_AUTO -1
1191 #define IOAPIC_EDGE 0
1192 #define IOAPIC_LEVEL 1
1194 static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger)
1196 if (use_pci_vector() && !platform_legacy_irq(irq)) {
1197 if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1198 trigger == IOAPIC_LEVEL)
1199 irq_desc[vector].handler = &ioapic_level_type;
1201 irq_desc[vector].handler = &ioapic_edge_type;
1202 set_intr_gate(vector, interrupt[vector]);
1204 if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1205 trigger == IOAPIC_LEVEL)
1206 irq_desc[irq].handler = &ioapic_level_type;
1208 irq_desc[irq].handler = &ioapic_edge_type;
1209 set_intr_gate(vector, interrupt[irq]);
1213 static void __init setup_IO_APIC_irqs(void)
1215 struct IO_APIC_route_entry entry;
1216 int apic, pin, idx, irq, first_notcon = 1, vector;
1217 unsigned long flags;
1219 apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
1221 for (apic = 0; apic < nr_ioapics; apic++) {
1222 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1225 * add it to the IO-APIC irq-routing table:
1227 memset(&entry,0,sizeof(entry));
1229 entry.delivery_mode = INT_DELIVERY_MODE;
1230 entry.dest_mode = INT_DEST_MODE;
1231 entry.mask = 0; /* enable IRQ */
1232 entry.dest.logical.logical_dest =
1233 cpu_mask_to_apicid(TARGET_CPUS);
1235 idx = find_irq_entry(apic,pin,mp_INT);
1238 apic_printk(APIC_VERBOSE, KERN_DEBUG
1239 " IO-APIC (apicid-pin) %d-%d",
1240 mp_ioapics[apic].mpc_apicid,
1244 apic_printk(APIC_VERBOSE, ", %d-%d",
1245 mp_ioapics[apic].mpc_apicid, pin);
1249 entry.trigger = irq_trigger(idx);
1250 entry.polarity = irq_polarity(idx);
1252 if (irq_trigger(idx)) {
1257 irq = pin_2_irq(idx, apic, pin);
1259 * skip adding the timer int on secondary nodes, which causes
1260 * a small but painful rift in the time-space continuum
1262 if (multi_timer_check(apic, irq))
1265 add_pin_to_irq(irq, apic, pin);
1267 if (!apic && !IO_APIC_IRQ(irq))
1270 if (IO_APIC_IRQ(irq)) {
1271 vector = assign_irq_vector(irq);
1272 entry.vector = vector;
1273 ioapic_register_intr(irq, vector, IOAPIC_AUTO);
1275 if (!apic && (irq < 16))
1276 disable_8259A_irq(irq);
1278 spin_lock_irqsave(&ioapic_lock, flags);
1279 io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
1280 io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
1281 set_native_irq_info(irq, TARGET_CPUS);
1282 spin_unlock_irqrestore(&ioapic_lock, flags);
1287 apic_printk(APIC_VERBOSE, " not connected.\n");
1291 * Set up the 8259A-master output pin:
1293 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
1295 struct IO_APIC_route_entry entry;
1296 unsigned long flags;
1298 memset(&entry,0,sizeof(entry));
1300 disable_8259A_irq(0);
1303 apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1306 * We use logical delivery to get the timer IRQ
1309 entry.dest_mode = INT_DEST_MODE;
1310 entry.mask = 0; /* unmask IRQ now */
1311 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
1312 entry.delivery_mode = INT_DELIVERY_MODE;
1315 entry.vector = vector;
1318 * The timer IRQ doesn't have to know that behind the
1319 * scene we have a 8259A-master in AEOI mode ...
1321 irq_desc[0].handler = &ioapic_edge_type;
1324 * Add it to the IO-APIC irq-routing table:
1326 spin_lock_irqsave(&ioapic_lock, flags);
1327 io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
1328 io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
1329 spin_unlock_irqrestore(&ioapic_lock, flags);
1331 enable_8259A_irq(0);
1334 static inline void UNEXPECTED_IO_APIC(void)
1338 void __init print_IO_APIC(void)
1341 union IO_APIC_reg_00 reg_00;
1342 union IO_APIC_reg_01 reg_01;
1343 union IO_APIC_reg_02 reg_02;
1344 union IO_APIC_reg_03 reg_03;
1345 unsigned long flags;
1347 if (apic_verbosity == APIC_QUIET)
1350 printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
1351 for (i = 0; i < nr_ioapics; i++)
1352 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
1353 mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
1356 * We are a bit conservative about what we expect. We have to
1357 * know about every hardware change ASAP.
1359 printk(KERN_INFO "testing the IO APIC.......................\n");
1361 for (apic = 0; apic < nr_ioapics; apic++) {
1363 spin_lock_irqsave(&ioapic_lock, flags);
1364 reg_00.raw = io_apic_read(apic, 0);
1365 reg_01.raw = io_apic_read(apic, 1);
1366 if (reg_01.bits.version >= 0x10)
1367 reg_02.raw = io_apic_read(apic, 2);
1368 if (reg_01.bits.version >= 0x20)
1369 reg_03.raw = io_apic_read(apic, 3);
1370 spin_unlock_irqrestore(&ioapic_lock, flags);
1372 printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
1373 printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
1374 printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
1375 printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
1376 printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS);
1377 if (reg_00.bits.ID >= get_physical_broadcast())
1378 UNEXPECTED_IO_APIC();
1379 if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
1380 UNEXPECTED_IO_APIC();
1382 printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
1383 printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
1384 if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
1385 (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
1386 (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
1387 (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
1388 (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
1389 (reg_01.bits.entries != 0x2E) &&
1390 (reg_01.bits.entries != 0x3F)
1392 UNEXPECTED_IO_APIC();
1394 printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
1395 printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
1396 if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
1397 (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
1398 (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
1399 (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
1400 (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */
1402 UNEXPECTED_IO_APIC();
1403 if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
1404 UNEXPECTED_IO_APIC();
1407 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1408 * but the value of reg_02 is read as the previous read register
1409 * value, so ignore it if reg_02 == reg_01.
1411 if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
1412 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
1413 printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
1414 if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
1415 UNEXPECTED_IO_APIC();
1419 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1420 * or reg_03, but the value of reg_0[23] is read as the previous read
1421 * register value, so ignore it if reg_03 == reg_0[12].
1423 if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
1424 reg_03.raw != reg_01.raw) {
1425 printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
1426 printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT);
1427 if (reg_03.bits.__reserved_1)
1428 UNEXPECTED_IO_APIC();
1431 printk(KERN_DEBUG ".... IRQ redirection table:\n");
1433 printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
1434 " Stat Dest Deli Vect: \n");
1436 for (i = 0; i <= reg_01.bits.entries; i++) {
1437 struct IO_APIC_route_entry entry;
1439 spin_lock_irqsave(&ioapic_lock, flags);
1440 *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
1441 *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
1442 spin_unlock_irqrestore(&ioapic_lock, flags);
1444 printk(KERN_DEBUG " %02x %03X %02X ",
1446 entry.dest.logical.logical_dest,
1447 entry.dest.physical.physical_dest
1450 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1455 entry.delivery_status,
1457 entry.delivery_mode,
1462 if (use_pci_vector())
1463 printk(KERN_INFO "Using vector-based indexing\n");
1464 printk(KERN_DEBUG "IRQ to pin mappings:\n");
1465 for (i = 0; i < NR_IRQS; i++) {
1466 struct irq_pin_list *entry = irq_2_pin + i;
1469 if (use_pci_vector() && !platform_legacy_irq(i))
1470 printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
1472 printk(KERN_DEBUG "IRQ%d ", i);
1474 printk("-> %d:%d", entry->apic, entry->pin);
1477 entry = irq_2_pin + entry->next;
1482 printk(KERN_INFO ".................................... done.\n");
1489 static void print_APIC_bitfield (int base)
1494 if (apic_verbosity == APIC_QUIET)
1497 printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1498 for (i = 0; i < 8; i++) {
1499 v = apic_read(base + i*0x10);
1500 for (j = 0; j < 32; j++) {
1510 void /*__init*/ print_local_APIC(void * dummy)
1512 unsigned int v, ver, maxlvt;
1514 if (apic_verbosity == APIC_QUIET)
1517 printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1518 smp_processor_id(), hard_smp_processor_id());
1519 v = apic_read(APIC_ID);
1520 printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
1521 v = apic_read(APIC_LVR);
1522 printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1523 ver = GET_APIC_VERSION(v);
1524 maxlvt = get_maxlvt();
1526 v = apic_read(APIC_TASKPRI);
1527 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1529 if (APIC_INTEGRATED(ver)) { /* !82489DX */
1530 v = apic_read(APIC_ARBPRI);
1531 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1532 v & APIC_ARBPRI_MASK);
1533 v = apic_read(APIC_PROCPRI);
1534 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1537 v = apic_read(APIC_EOI);
1538 printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
1539 v = apic_read(APIC_RRR);
1540 printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1541 v = apic_read(APIC_LDR);
1542 printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1543 v = apic_read(APIC_DFR);
1544 printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1545 v = apic_read(APIC_SPIV);
1546 printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1548 printk(KERN_DEBUG "... APIC ISR field:\n");
1549 print_APIC_bitfield(APIC_ISR);
1550 printk(KERN_DEBUG "... APIC TMR field:\n");
1551 print_APIC_bitfield(APIC_TMR);
1552 printk(KERN_DEBUG "... APIC IRR field:\n");
1553 print_APIC_bitfield(APIC_IRR);
1555 if (APIC_INTEGRATED(ver)) { /* !82489DX */
1556 if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
1557 apic_write(APIC_ESR, 0);
1558 v = apic_read(APIC_ESR);
1559 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1562 v = apic_read(APIC_ICR);
1563 printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
1564 v = apic_read(APIC_ICR2);
1565 printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
1567 v = apic_read(APIC_LVTT);
1568 printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1570 if (maxlvt > 3) { /* PC is LVT#4. */
1571 v = apic_read(APIC_LVTPC);
1572 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1574 v = apic_read(APIC_LVT0);
1575 printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1576 v = apic_read(APIC_LVT1);
1577 printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1579 if (maxlvt > 2) { /* ERR is LVT#3. */
1580 v = apic_read(APIC_LVTERR);
1581 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1584 v = apic_read(APIC_TMICT);
1585 printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1586 v = apic_read(APIC_TMCCT);
1587 printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1588 v = apic_read(APIC_TDCR);
1589 printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1593 void print_all_local_APICs (void)
1595 on_each_cpu(print_local_APIC, NULL, 1, 1);
1598 void /*__init*/ print_PIC(void)
1601 unsigned long flags;
1603 if (apic_verbosity == APIC_QUIET)
1606 printk(KERN_DEBUG "\nprinting PIC contents\n");
1608 spin_lock_irqsave(&i8259A_lock, flags);
1610 v = inb(0xa1) << 8 | inb(0x21);
1611 printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
1613 v = inb(0xa0) << 8 | inb(0x20);
1614 printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
1618 v = inb(0xa0) << 8 | inb(0x20);
1622 spin_unlock_irqrestore(&i8259A_lock, flags);
1624 printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
1626 v = inb(0x4d1) << 8 | inb(0x4d0);
1627 printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1632 static void __init enable_IO_APIC(void)
1634 union IO_APIC_reg_01 reg_01;
1635 int i8259_apic, i8259_pin;
1637 unsigned long flags;
1639 for (i = 0; i < PIN_MAP_SIZE; i++) {
1640 irq_2_pin[i].pin = -1;
1641 irq_2_pin[i].next = 0;
1644 for (i = 0; i < MAX_PIRQS; i++)
1645 pirq_entries[i] = -1;
1648 * The number of IO-APIC IRQ registers (== #pins):
1650 for (apic = 0; apic < nr_ioapics; apic++) {
1651 spin_lock_irqsave(&ioapic_lock, flags);
1652 reg_01.raw = io_apic_read(apic, 1);
1653 spin_unlock_irqrestore(&ioapic_lock, flags);
1654 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1656 for(apic = 0; apic < nr_ioapics; apic++) {
1658 /* See if any of the pins is in ExtINT mode */
1659 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1660 struct IO_APIC_route_entry entry;
1661 spin_lock_irqsave(&ioapic_lock, flags);
1662 *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
1663 *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
1664 spin_unlock_irqrestore(&ioapic_lock, flags);
1667 /* If the interrupt line is enabled and in ExtInt mode
1668 * I have found the pin where the i8259 is connected.
1670 if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1671 ioapic_i8259.apic = apic;
1672 ioapic_i8259.pin = pin;
1678 /* Look to see what if the MP table has reported the ExtINT */
1679 /* If we could not find the appropriate pin by looking at the ioapic
1680 * the i8259 probably is not connected the ioapic but give the
1681 * mptable a chance anyway.
1683 i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
1684 i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1685 /* Trust the MP table if nothing is setup in the hardware */
1686 if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1687 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1688 ioapic_i8259.pin = i8259_pin;
1689 ioapic_i8259.apic = i8259_apic;
1691 /* Complain if the MP table and the hardware disagree */
1692 if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1693 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1695 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1699 * Do not trust the IO-APIC being empty at bootup
1705 * Not an __init, needed by the reboot code
1707 void disable_IO_APIC(void)
1710 * Clear the IO-APIC before rebooting:
1715 * If the i8259 is routed through an IOAPIC
1716 * Put that IOAPIC in virtual wire mode
1717 * so legacy interrupts can be delivered.
1719 if (ioapic_i8259.pin != -1) {
1720 struct IO_APIC_route_entry entry;
1721 unsigned long flags;
1723 memset(&entry, 0, sizeof(entry));
1724 entry.mask = 0; /* Enabled */
1725 entry.trigger = 0; /* Edge */
1727 entry.polarity = 0; /* High */
1728 entry.delivery_status = 0;
1729 entry.dest_mode = 0; /* Physical */
1730 entry.delivery_mode = dest_ExtINT; /* ExtInt */
1732 entry.dest.physical.physical_dest =
1733 GET_APIC_ID(apic_read(APIC_ID));
1736 * Add it to the IO-APIC irq-routing table:
1738 spin_lock_irqsave(&ioapic_lock, flags);
1739 io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
1740 *(((int *)&entry)+1));
1741 io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
1742 *(((int *)&entry)+0));
1743 spin_unlock_irqrestore(&ioapic_lock, flags);
1745 disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1749 * function to set the IO-APIC physical IDs based on the
1750 * values stored in the MPC table.
1752 * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
1755 #ifndef CONFIG_X86_NUMAQ
1756 static void __init setup_ioapic_ids_from_mpc(void)
1758 union IO_APIC_reg_00 reg_00;
1759 physid_mask_t phys_id_present_map;
1762 unsigned char old_id;
1763 unsigned long flags;
1766 * Don't check I/O APIC IDs for xAPIC systems. They have
1767 * no meaning without the serial APIC bus.
1769 if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
1770 || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
1773 * This is broken; anything with a real cpu count has to
1774 * circumvent this idiocy regardless.
1776 phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
1779 * Set the IOAPIC ID to the value stored in the MPC table.
1781 for (apic = 0; apic < nr_ioapics; apic++) {
1783 /* Read the register 0 value */
1784 spin_lock_irqsave(&ioapic_lock, flags);
1785 reg_00.raw = io_apic_read(apic, 0);
1786 spin_unlock_irqrestore(&ioapic_lock, flags);
1788 old_id = mp_ioapics[apic].mpc_apicid;
1790 if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
1791 printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
1792 apic, mp_ioapics[apic].mpc_apicid);
1793 printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1795 mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
1799 * Sanity check, is the ID really free? Every APIC in a
1800 * system must have a unique ID or we get lots of nice
1801 * 'stuck on smp_invalidate_needed IPI wait' messages.
1803 if (check_apicid_used(phys_id_present_map,
1804 mp_ioapics[apic].mpc_apicid)) {
1805 printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
1806 apic, mp_ioapics[apic].mpc_apicid);
1807 for (i = 0; i < get_physical_broadcast(); i++)
1808 if (!physid_isset(i, phys_id_present_map))
1810 if (i >= get_physical_broadcast())
1811 panic("Max APIC ID exceeded!\n");
1812 printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1814 physid_set(i, phys_id_present_map);
1815 mp_ioapics[apic].mpc_apicid = i;
1818 tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
1819 apic_printk(APIC_VERBOSE, "Setting %d in the "
1820 "phys_id_present_map\n",
1821 mp_ioapics[apic].mpc_apicid);
1822 physids_or(phys_id_present_map, phys_id_present_map, tmp);
1827 * We need to adjust the IRQ routing table
1828 * if the ID changed.
1830 if (old_id != mp_ioapics[apic].mpc_apicid)
1831 for (i = 0; i < mp_irq_entries; i++)
1832 if (mp_irqs[i].mpc_dstapic == old_id)
1833 mp_irqs[i].mpc_dstapic
1834 = mp_ioapics[apic].mpc_apicid;
1837 * Read the right value from the MPC table and
1838 * write it into the ID register.
1840 apic_printk(APIC_VERBOSE, KERN_INFO
1841 "...changing IO-APIC physical APIC ID to %d ...",
1842 mp_ioapics[apic].mpc_apicid);
1844 reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
1845 spin_lock_irqsave(&ioapic_lock, flags);
1846 io_apic_write(apic, 0, reg_00.raw);
1847 spin_unlock_irqrestore(&ioapic_lock, flags);
1852 spin_lock_irqsave(&ioapic_lock, flags);
1853 reg_00.raw = io_apic_read(apic, 0);
1854 spin_unlock_irqrestore(&ioapic_lock, flags);
1855 if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
1856 printk("could not set ID!\n");
1858 apic_printk(APIC_VERBOSE, " ok.\n");
1862 static void __init setup_ioapic_ids_from_mpc(void) { }
1866 * There is a nasty bug in some older SMP boards, their mptable lies
1867 * about the timer IRQ. We do the following to work around the situation:
1869 * - timer IRQ defaults to IO-APIC IRQ
1870 * - if this function detects that timer IRQs are defunct, then we fall
1871 * back to ISA timer IRQs
1873 static int __init timer_irq_works(void)
1875 unsigned long t1 = jiffies;
1878 /* Let ten ticks pass... */
1879 mdelay((10 * 1000) / HZ);
1882 * Expect a few ticks at least, to be sure some possible
1883 * glue logic does not lock up after one or two first
1884 * ticks in a non-ExtINT mode. Also the local APIC
1885 * might have cached one ExtINT interrupt. Finally, at
1886 * least one tick may be lost due to delays.
1888 if (jiffies - t1 > 4)
1895 * In the SMP+IOAPIC case it might happen that there are an unspecified
1896 * number of pending IRQ events unhandled. These cases are very rare,
1897 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1898 * better to do it this way as thus we do not have to be aware of
1899 * 'pending' interrupts in the IRQ path, except at this point.
1902 * Edge triggered needs to resend any interrupt
1903 * that was delayed but this is now handled in the device
1908 * Starting up a edge-triggered IO-APIC interrupt is
1909 * nasty - we need to make sure that we get the edge.
1910 * If it is already asserted for some reason, we need
1911 * return 1 to indicate that is was pending.
1913 * This is not complete - we should be able to fake
1914 * an edge even if it isn't on the 8259A...
1916 static unsigned int startup_edge_ioapic_irq(unsigned int irq)
1918 int was_pending = 0;
1919 unsigned long flags;
1921 spin_lock_irqsave(&ioapic_lock, flags);
1923 disable_8259A_irq(irq);
1924 if (i8259A_irq_pending(irq))
1927 __unmask_IO_APIC_irq(irq);
1928 spin_unlock_irqrestore(&ioapic_lock, flags);
1934 * Once we have recorded IRQ_PENDING already, we can mask the
1935 * interrupt for real. This prevents IRQ storms from unhandled
1938 static void ack_edge_ioapic_irq(unsigned int irq)
1941 if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
1942 == (IRQ_PENDING | IRQ_DISABLED))
1943 mask_IO_APIC_irq(irq);
1948 * Level triggered interrupts can just be masked,
1949 * and shutting down and starting up the interrupt
1950 * is the same as enabling and disabling them -- except
1951 * with a startup need to return a "was pending" value.
1953 * Level triggered interrupts are special because we
1954 * do not touch any IO-APIC register while handling
1955 * them. We ack the APIC in the end-IRQ handler, not
1956 * in the start-IRQ-handler. Protection against reentrance
1957 * from the same interrupt is still provided, both by the
1958 * generic IRQ layer and by the fact that an unacked local
1959 * APIC does not accept IRQs.
1961 static unsigned int startup_level_ioapic_irq (unsigned int irq)
1963 unmask_IO_APIC_irq(irq);
1965 return 0; /* don't check for pending */
1968 static void end_level_ioapic_irq (unsigned int irq)
1975 * It appears there is an erratum which affects at least version 0x11
1976 * of I/O APIC (that's the 82093AA and cores integrated into various
1977 * chipsets). Under certain conditions a level-triggered interrupt is
1978 * erroneously delivered as edge-triggered one but the respective IRR
1979 * bit gets set nevertheless. As a result the I/O unit expects an EOI
1980 * message but it will never arrive and further interrupts are blocked
1981 * from the source. The exact reason is so far unknown, but the
1982 * phenomenon was observed when two consecutive interrupt requests
1983 * from a given source get delivered to the same CPU and the source is
1984 * temporarily disabled in between.
1986 * A workaround is to simulate an EOI message manually. We achieve it
1987 * by setting the trigger mode to edge and then to level when the edge
1988 * trigger mode gets detected in the TMR of a local APIC for a
1989 * level-triggered interrupt. We mask the source for the time of the
1990 * operation to prevent an edge-triggered interrupt escaping meanwhile.
1991 * The idea is from Manfred Spraul. --macro
1993 i = IO_APIC_VECTOR(irq);
1995 v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
1999 if (!(v & (1 << (i & 0x1f)))) {
2000 atomic_inc(&irq_mis_count);
2001 spin_lock(&ioapic_lock);
2002 __mask_and_edge_IO_APIC_irq(irq);
2003 __unmask_and_level_IO_APIC_irq(irq);
2004 spin_unlock(&ioapic_lock);
2008 #ifdef CONFIG_PCI_MSI
2009 static unsigned int startup_edge_ioapic_vector(unsigned int vector)
2011 int irq = vector_to_irq(vector);
2013 return startup_edge_ioapic_irq(irq);
2016 static void ack_edge_ioapic_vector(unsigned int vector)
2018 int irq = vector_to_irq(vector);
2020 move_native_irq(vector);
2021 ack_edge_ioapic_irq(irq);
2024 static unsigned int startup_level_ioapic_vector (unsigned int vector)
2026 int irq = vector_to_irq(vector);
2028 return startup_level_ioapic_irq (irq);
2031 static void end_level_ioapic_vector (unsigned int vector)
2033 int irq = vector_to_irq(vector);
2035 move_native_irq(vector);
2036 end_level_ioapic_irq(irq);
2039 static void mask_IO_APIC_vector (unsigned int vector)
2041 int irq = vector_to_irq(vector);
2043 mask_IO_APIC_irq(irq);
2046 static void unmask_IO_APIC_vector (unsigned int vector)
2048 int irq = vector_to_irq(vector);
2050 unmask_IO_APIC_irq(irq);
2054 static void set_ioapic_affinity_vector (unsigned int vector,
2057 int irq = vector_to_irq(vector);
2059 set_native_irq_info(vector, cpu_mask);
2060 set_ioapic_affinity_irq(irq, cpu_mask);
2066 * Level and edge triggered IO-APIC interrupts need different handling,
2067 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
2068 * handled with the level-triggered descriptor, but that one has slightly
2069 * more overhead. Level-triggered interrupts cannot be handled with the
2070 * edge-triggered handler, without risking IRQ storms and other ugly
2073 static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
2074 .typename = "IO-APIC-edge",
2075 .startup = startup_edge_ioapic,
2076 .shutdown = shutdown_edge_ioapic,
2077 .enable = enable_edge_ioapic,
2078 .disable = disable_edge_ioapic,
2079 .ack = ack_edge_ioapic,
2080 .end = end_edge_ioapic,
2082 .set_affinity = set_ioapic_affinity,
2086 static struct hw_interrupt_type ioapic_level_type __read_mostly = {
2087 .typename = "IO-APIC-level",
2088 .startup = startup_level_ioapic,
2089 .shutdown = shutdown_level_ioapic,
2090 .enable = enable_level_ioapic,
2091 .disable = disable_level_ioapic,
2092 .ack = mask_and_ack_level_ioapic,
2093 .end = end_level_ioapic,
2095 .set_affinity = set_ioapic_affinity,
2099 static inline void init_IO_APIC_traps(void)
2104 * NOTE! The local APIC isn't very good at handling
2105 * multiple interrupts at the same interrupt level.
2106 * As the interrupt level is determined by taking the
2107 * vector number and shifting that right by 4, we
2108 * want to spread these out a bit so that they don't
2109 * all fall in the same interrupt level.
2111 * Also, we've got to be careful not to trash gate
2112 * 0x80, because int 0x80 is hm, kind of importantish. ;)
2114 for (irq = 0; irq < NR_IRQS ; irq++) {
2116 if (use_pci_vector()) {
2117 if (!platform_legacy_irq(tmp))
2118 if ((tmp = vector_to_irq(tmp)) == -1)
2121 if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
2123 * Hmm.. We don't have an entry for this,
2124 * so default to an old-fashioned 8259
2125 * interrupt if we can..
2128 make_8259A_irq(irq);
2130 /* Strange. Oh, well.. */
2131 irq_desc[irq].handler = &no_irq_type;
2136 static void enable_lapic_irq (unsigned int irq)
2140 v = apic_read(APIC_LVT0);
2141 apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
2144 static void disable_lapic_irq (unsigned int irq)
2148 v = apic_read(APIC_LVT0);
2149 apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
2152 static void ack_lapic_irq (unsigned int irq)
2157 static void end_lapic_irq (unsigned int i) { /* nothing */ }
2159 static struct hw_interrupt_type lapic_irq_type __read_mostly = {
2160 .typename = "local-APIC-edge",
2161 .startup = NULL, /* startup_irq() not used for IRQ0 */
2162 .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
2163 .enable = enable_lapic_irq,
2164 .disable = disable_lapic_irq,
2165 .ack = ack_lapic_irq,
2166 .end = end_lapic_irq
2169 static void setup_nmi (void)
2172 * Dirty trick to enable the NMI watchdog ...
2173 * We put the 8259A master into AEOI mode and
2174 * unmask on all local APICs LVT0 as NMI.
2176 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
2177 * is from Maciej W. Rozycki - so we do not have to EOI from
2178 * the NMI handler or the timer interrupt.
2180 apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
2182 on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1);
2184 apic_printk(APIC_VERBOSE, " done.\n");
2188 * This looks a bit hackish but it's about the only one way of sending
2189 * a few INTA cycles to 8259As and any associated glue logic. ICR does
2190 * not support the ExtINT mode, unfortunately. We need to send these
2191 * cycles as some i82489DX-based boards have glue logic that keeps the
2192 * 8259A interrupt line asserted until INTA. --macro
2194 static inline void unlock_ExtINT_logic(void)
2197 struct IO_APIC_route_entry entry0, entry1;
2198 unsigned char save_control, save_freq_select;
2199 unsigned long flags;
2201 pin = find_isa_irq_pin(8, mp_INT);
2202 apic = find_isa_irq_apic(8, mp_INT);
2206 spin_lock_irqsave(&ioapic_lock, flags);
2207 *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
2208 *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
2209 spin_unlock_irqrestore(&ioapic_lock, flags);
2210 clear_IO_APIC_pin(apic, pin);
2212 memset(&entry1, 0, sizeof(entry1));
2214 entry1.dest_mode = 0; /* physical delivery */
2215 entry1.mask = 0; /* unmask IRQ now */
2216 entry1.dest.physical.physical_dest = hard_smp_processor_id();
2217 entry1.delivery_mode = dest_ExtINT;
2218 entry1.polarity = entry0.polarity;
2222 spin_lock_irqsave(&ioapic_lock, flags);
2223 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
2224 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
2225 spin_unlock_irqrestore(&ioapic_lock, flags);
2227 save_control = CMOS_READ(RTC_CONTROL);
2228 save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
2229 CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
2231 CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
2236 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
2240 CMOS_WRITE(save_control, RTC_CONTROL);
2241 CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
2242 clear_IO_APIC_pin(apic, pin);
2244 spin_lock_irqsave(&ioapic_lock, flags);
2245 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
2246 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
2247 spin_unlock_irqrestore(&ioapic_lock, flags);
2250 int timer_uses_ioapic_pin_0;
2253 * This code may look a bit paranoid, but it's supposed to cooperate with
2254 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
2255 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
2256 * fanatically on his truly buggy board.
2258 static inline void check_timer(void)
2260 int apic1, pin1, apic2, pin2;
2264 * get/set the timer IRQ vector:
2266 disable_8259A_irq(0);
2267 vector = assign_irq_vector(0);
2268 set_intr_gate(vector, interrupt[0]);
2271 * Subtle, code in do_timer_interrupt() expects an AEOI
2272 * mode for the 8259A whenever interrupts are routed
2273 * through I/O APICs. Also IRQ0 has to be enabled in
2274 * the 8259A which implies the virtual wire has to be
2275 * disabled in the local APIC.
2277 apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
2280 if (timer_over_8254 > 0)
2281 enable_8259A_irq(0);
2283 pin1 = find_isa_irq_pin(0, mp_INT);
2284 apic1 = find_isa_irq_apic(0, mp_INT);
2285 pin2 = ioapic_i8259.pin;
2286 apic2 = ioapic_i8259.apic;
2289 timer_uses_ioapic_pin_0 = 1;
2291 printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
2292 vector, apic1, pin1, apic2, pin2);
2296 * Ok, does IRQ0 through the IOAPIC work?
2298 unmask_IO_APIC_irq(0);
2299 if (timer_irq_works()) {
2300 if (nmi_watchdog == NMI_IO_APIC) {
2301 disable_8259A_irq(0);
2303 enable_8259A_irq(0);
2305 if (disable_timer_pin_1 > 0)
2306 clear_IO_APIC_pin(0, pin1);
2309 clear_IO_APIC_pin(apic1, pin1);
2310 printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
2314 printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
2316 printk("\n..... (found pin %d) ...", pin2);
2318 * legacy devices should be connected to IO APIC #0
2320 setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
2321 if (timer_irq_works()) {
2324 replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
2326 add_pin_to_irq(0, apic2, pin2);
2327 if (nmi_watchdog == NMI_IO_APIC) {
2333 * Cleanup, just in case ...
2335 clear_IO_APIC_pin(apic2, pin2);
2337 printk(" failed.\n");
2339 if (nmi_watchdog == NMI_IO_APIC) {
2340 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
2344 printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
2346 disable_8259A_irq(0);
2347 irq_desc[0].handler = &lapic_irq_type;
2348 apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
2349 enable_8259A_irq(0);
2351 if (timer_irq_works()) {
2352 printk(" works.\n");
2355 apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
2356 printk(" failed.\n");
2358 printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
2363 apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
2365 unlock_ExtINT_logic();
2367 if (timer_irq_works()) {
2368 printk(" works.\n");
2371 printk(" failed :(.\n");
2372 panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
2373 "report. Then try booting with the 'noapic' option");
2378 * IRQ's that are handled by the PIC in the MPS IOAPIC case.
2379 * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
2380 * Linux doesn't really care, as it's not actually used
2381 * for any interrupt handling anyway.
2383 #define PIC_IRQS (1 << PIC_CASCADE_IR)
2385 void __init setup_IO_APIC(void)
2390 io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
2392 io_apic_irqs = ~PIC_IRQS;
2394 printk("ENABLING IO-APIC IRQs\n");
2397 * Set up IO-APIC IRQ routing.
2400 setup_ioapic_ids_from_mpc();
2402 setup_IO_APIC_irqs();
2403 init_IO_APIC_traps();
2409 static int __init setup_disable_8254_timer(char *s)
2411 timer_over_8254 = -1;
2414 static int __init setup_enable_8254_timer(char *s)
2416 timer_over_8254 = 2;
2420 __setup("disable_8254_timer", setup_disable_8254_timer);
2421 __setup("enable_8254_timer", setup_enable_8254_timer);
2424 * Called after all the initialization is done. If we didnt find any
2425 * APIC bugs then we can allow the modify fast path
2428 static int __init io_apic_bug_finalize(void)
2430 if(sis_apic_bug == -1)
2435 late_initcall(io_apic_bug_finalize);
2437 struct sysfs_ioapic_data {
2438 struct sys_device dev;
2439 struct IO_APIC_route_entry entry[0];
2441 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
2443 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
2445 struct IO_APIC_route_entry *entry;
2446 struct sysfs_ioapic_data *data;
2447 unsigned long flags;
2450 data = container_of(dev, struct sysfs_ioapic_data, dev);
2451 entry = data->entry;
2452 spin_lock_irqsave(&ioapic_lock, flags);
2453 for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
2454 *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
2455 *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
2457 spin_unlock_irqrestore(&ioapic_lock, flags);
2462 static int ioapic_resume(struct sys_device *dev)
2464 struct IO_APIC_route_entry *entry;
2465 struct sysfs_ioapic_data *data;
2466 unsigned long flags;
2467 union IO_APIC_reg_00 reg_00;
2470 data = container_of(dev, struct sysfs_ioapic_data, dev);
2471 entry = data->entry;
2473 spin_lock_irqsave(&ioapic_lock, flags);
2474 reg_00.raw = io_apic_read(dev->id, 0);
2475 if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
2476 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
2477 io_apic_write(dev->id, 0, reg_00.raw);
2479 for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
2480 io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
2481 io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
2483 spin_unlock_irqrestore(&ioapic_lock, flags);
2488 static struct sysdev_class ioapic_sysdev_class = {
2489 set_kset_name("ioapic"),
2490 .suspend = ioapic_suspend,
2491 .resume = ioapic_resume,
2494 static int __init ioapic_init_sysfs(void)
2496 struct sys_device * dev;
2497 int i, size, error = 0;
2499 error = sysdev_class_register(&ioapic_sysdev_class);
2503 for (i = 0; i < nr_ioapics; i++ ) {
2504 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
2505 * sizeof(struct IO_APIC_route_entry);
2506 mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
2507 if (!mp_ioapic_data[i]) {
2508 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2511 memset(mp_ioapic_data[i], 0, size);
2512 dev = &mp_ioapic_data[i]->dev;
2514 dev->cls = &ioapic_sysdev_class;
2515 error = sysdev_register(dev);
2517 kfree(mp_ioapic_data[i]);
2518 mp_ioapic_data[i] = NULL;
2519 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2527 device_initcall(ioapic_init_sysfs);
2529 /* --------------------------------------------------------------------------
2530 ACPI-based IOAPIC Configuration
2531 -------------------------------------------------------------------------- */
2535 int __init io_apic_get_unique_id (int ioapic, int apic_id)
2537 union IO_APIC_reg_00 reg_00;
2538 static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
2540 unsigned long flags;
2544 * The P4 platform supports up to 256 APIC IDs on two separate APIC
2545 * buses (one for LAPICs, one for IOAPICs), where predecessors only
2546 * supports up to 16 on one shared APIC bus.
2548 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
2549 * advantage of new APIC bus architecture.
2552 if (physids_empty(apic_id_map))
2553 apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
2555 spin_lock_irqsave(&ioapic_lock, flags);
2556 reg_00.raw = io_apic_read(ioapic, 0);
2557 spin_unlock_irqrestore(&ioapic_lock, flags);
2559 if (apic_id >= get_physical_broadcast()) {
2560 printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
2561 "%d\n", ioapic, apic_id, reg_00.bits.ID);
2562 apic_id = reg_00.bits.ID;
2566 * Every APIC in a system must have a unique ID or we get lots of nice
2567 * 'stuck on smp_invalidate_needed IPI wait' messages.
2569 if (check_apicid_used(apic_id_map, apic_id)) {
2571 for (i = 0; i < get_physical_broadcast(); i++) {
2572 if (!check_apicid_used(apic_id_map, i))
2576 if (i == get_physical_broadcast())
2577 panic("Max apic_id exceeded!\n");
2579 printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
2580 "trying %d\n", ioapic, apic_id, i);
2585 tmp = apicid_to_cpu_present(apic_id);
2586 physids_or(apic_id_map, apic_id_map, tmp);
2588 if (reg_00.bits.ID != apic_id) {
2589 reg_00.bits.ID = apic_id;
2591 spin_lock_irqsave(&ioapic_lock, flags);
2592 io_apic_write(ioapic, 0, reg_00.raw);
2593 reg_00.raw = io_apic_read(ioapic, 0);
2594 spin_unlock_irqrestore(&ioapic_lock, flags);
2597 if (reg_00.bits.ID != apic_id) {
2598 printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
2603 apic_printk(APIC_VERBOSE, KERN_INFO
2604 "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
2610 int __init io_apic_get_version (int ioapic)
2612 union IO_APIC_reg_01 reg_01;
2613 unsigned long flags;
2615 spin_lock_irqsave(&ioapic_lock, flags);
2616 reg_01.raw = io_apic_read(ioapic, 1);
2617 spin_unlock_irqrestore(&ioapic_lock, flags);
2619 return reg_01.bits.version;
2623 int __init io_apic_get_redir_entries (int ioapic)
2625 union IO_APIC_reg_01 reg_01;
2626 unsigned long flags;
2628 spin_lock_irqsave(&ioapic_lock, flags);
2629 reg_01.raw = io_apic_read(ioapic, 1);
2630 spin_unlock_irqrestore(&ioapic_lock, flags);
2632 return reg_01.bits.entries;
2636 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
2638 struct IO_APIC_route_entry entry;
2639 unsigned long flags;
2641 if (!IO_APIC_IRQ(irq)) {
2642 printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
2648 * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
2649 * Note that we mask (disable) IRQs now -- these get enabled when the
2650 * corresponding device driver registers for this IRQ.
2653 memset(&entry,0,sizeof(entry));
2655 entry.delivery_mode = INT_DELIVERY_MODE;
2656 entry.dest_mode = INT_DEST_MODE;
2657 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
2658 entry.trigger = edge_level;
2659 entry.polarity = active_high_low;
2663 * IRQs < 16 are already in the irq_2_pin[] map
2666 add_pin_to_irq(irq, ioapic, pin);
2668 entry.vector = assign_irq_vector(irq);
2670 apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
2671 "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
2672 mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
2673 edge_level, active_high_low);
2675 ioapic_register_intr(irq, entry.vector, edge_level);
2677 if (!ioapic && (irq < 16))
2678 disable_8259A_irq(irq);
2680 spin_lock_irqsave(&ioapic_lock, flags);
2681 io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
2682 io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
2683 set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
2684 spin_unlock_irqrestore(&ioapic_lock, flags);
2689 #endif /* CONFIG_ACPI */