err.no Git - linux-2.6/blob - arch/blackfin/kernel/setup.c

   1 /*
   2  * File:         arch/blackfin/kernel/setup.c
   3  * Based on:
   4  * Author:
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2004-2006 Analog Devices Inc.
  11  *
  12  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, see the file COPYING, or write
  26  * to the Free Software Foundation, Inc.,
  27  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  28  */
  29
  30 #include <linux/delay.h>
  31 #include <linux/console.h>
  32 #include <linux/bootmem.h>
  33 #include <linux/seq_file.h>
  34 #include <linux/cpu.h>
  35 #include <linux/module.h>
  36 #include <linux/tty.h>
  37
  38 #include <linux/ext2_fs.h>
  39 #include <linux/cramfs_fs.h>
  40 #include <linux/romfs_fs.h>
  41
  42 #include <asm/cacheflush.h>
  43 #include <asm/blackfin.h>
  44 #include <asm/cplbinit.h>
  45
  46 u16 _bfin_swrst;
  47
  48 unsigned long memory_start, memory_end, physical_mem_end;
  49 unsigned long reserved_mem_dcache_on;
  50 unsigned long reserved_mem_icache_on;
  51 EXPORT_SYMBOL(memory_start);
  52 EXPORT_SYMBOL(memory_end);
  53 EXPORT_SYMBOL(physical_mem_end);
  54 EXPORT_SYMBOL(_ramend);
  55
  56 #ifdef CONFIG_MTD_UCLINUX
  57 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
  58 unsigned long _ebss;
  59 EXPORT_SYMBOL(memory_mtd_end);
  60 EXPORT_SYMBOL(memory_mtd_start);
  61 EXPORT_SYMBOL(mtd_size);
  62 #endif
  63
  64 char __initdata command_line[COMMAND_LINE_SIZE];
  65
  66 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
  67 static void generate_cpl_tables(void);
  68 #endif
  69
  70 void __init bf53x_cache_init(void)
  71 {
  72 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
  73         generate_cpl_tables();
  74 #endif
  75
  76 #ifdef CONFIG_BLKFIN_CACHE
  77         bfin_icache_init();
  78         printk(KERN_INFO "Instruction Cache Enabled\n");
  79 #endif
  80
  81 #ifdef CONFIG_BLKFIN_DCACHE
  82         bfin_dcache_init();
  83         printk(KERN_INFO "Data Cache Enabled"
  84 # if defined CONFIG_BLKFIN_WB
  85                 " (write-back)"
  86 # elif defined CONFIG_BLKFIN_WT
  87                 " (write-through)"
  88 # endif
  89                 "\n");
  90 #endif
  91 }
  92
  93 void __init bf53x_relocate_l1_mem(void)
  94 {
  95         unsigned long l1_code_length;
  96         unsigned long l1_data_a_length;
  97         unsigned long l1_data_b_length;
  98
  99         l1_code_length = _etext_l1 - _stext_l1;
 100         if (l1_code_length > L1_CODE_LENGTH)
 101                 l1_code_length = L1_CODE_LENGTH;
 102         /* cannot complain as printk is not available as yet.
 103          * But we can continue booting and complain later!
 104          */
 105
 106         /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 107         dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 108
 109         l1_data_a_length = _ebss_l1 - _sdata_l1;
 110         if (l1_data_a_length > L1_DATA_A_LENGTH)
 111                 l1_data_a_length = L1_DATA_A_LENGTH;
 112
 113         /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
 114         dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 115
 116         l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
 117         if (l1_data_b_length > L1_DATA_B_LENGTH)
 118                 l1_data_b_length = L1_DATA_B_LENGTH;
 119
 120         /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
 121         dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 122                         l1_data_a_length, l1_data_b_length);
 123
 124 }
 125
 126 /*
 127  * Initial parsing of the command line.  Currently, we support:
 128  *  - Controlling the linux memory size: mem=xxx[KMG]
 129  *  - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
 130  *       $ -> reserved memory is dcacheable
 131  *       # -> reserved memory is icacheable
 132  */
 133 static __init void parse_cmdline_early(char *cmdline_p)
 134 {
 135         char c = ' ', *to = cmdline_p;
 136         unsigned int memsize;
 137         for (;;) {
 138                 if (c == ' ') {
 139
 140                         if (!memcmp(to, "mem=", 4)) {
 141                                 to += 4;
 142                                 memsize = memparse(to, &to);
 143                                 if (memsize)
 144                                         _ramend = memsize;
 145
 146                         } else if (!memcmp(to, "max_mem=", 8)) {
 147                                 to += 8;
 148                                 memsize = memparse(to, &to);
 149                                 if (memsize) {
 150                                         physical_mem_end = memsize;
 151                                         if (*to != ' ') {
 152                                                 if (*to == '$'
 153                                                     || *(to + 1) == '$')
 154                                                         reserved_mem_dcache_on =
 155                                                             1;
 156                                                 if (*to == '#'
 157                                                     || *(to + 1) == '#')
 158                                                         reserved_mem_icache_on =
 159                                                             1;
 160                                         }
 161                                 }
 162                         }
 163
 164                 }
 165                 c = *(to++);
 166                 if (!c)
 167                         break;
 168         }
 169 }
 170
 171 void __init setup_arch(char **cmdline_p)
 172 {
 173         int bootmap_size;
 174         unsigned long l1_length, sclk, cclk;
 175 #ifdef CONFIG_MTD_UCLINUX
 176         unsigned long mtd_phys = 0;
 177 #endif
 178
 179 #ifdef CONFIG_DUMMY_CONSOLE
 180         conswitchp = &dummy_con;
 181 #endif
 182         cclk = get_cclk();
 183         sclk = get_sclk();
 184
 185 #if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
 186         if (cclk == sclk)
 187                 panic("ANOMALY 05000273, SCLK can not be same as CCLK");
 188 #endif
 189
 190 #if defined(ANOMALY_05000266)
 191         bfin_read_IMDMA_D0_IRQ_STATUS();
 192         bfin_read_IMDMA_D1_IRQ_STATUS();
 193 #endif
 194
 195 #ifdef DEBUG_SERIAL_EARLY_INIT
 196         bfin_console_init();    /* early console registration */
 197         /* this give a chance to get printk() working before crash. */
 198 #endif
 199
 200 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 201         /* we need to initialize the Flashrom device here since we might
 202          * do things with flash early on in the boot
 203          */
 204         flash_probe();
 205 #endif
 206
 207 #if defined(CONFIG_CMDLINE_BOOL)
 208         strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
 209         command_line[sizeof(command_line) - 1] = 0;
 210 #endif
 211
 212         /* Keep a copy of command line */
 213         *cmdline_p = &command_line[0];
 214         memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 215         boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 216
 217         /* setup memory defaults from the user config */
 218         physical_mem_end = 0;
 219         _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
 220
 221         parse_cmdline_early(&command_line[0]);
 222
 223         if (physical_mem_end == 0)
 224                 physical_mem_end = _ramend;
 225
 226         /* by now the stack is part of the init task */
 227         memory_end = _ramend - DMA_UNCACHED_REGION;
 228
 229         _ramstart = (unsigned long)__bss_stop;
 230         memory_start = PAGE_ALIGN(_ramstart);
 231
 232 #if defined(CONFIG_MTD_UCLINUX)
 233         /* generic memory mapped MTD driver */
 234         memory_mtd_end = memory_end;
 235
 236         mtd_phys = _ramstart;
 237         mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
 238
 239 # if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
 240         if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
 241                 mtd_size =
 242                     PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
 243 # endif
 244
 245 # if defined(CONFIG_CRAMFS)
 246         if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
 247                 mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
 248 # endif
 249
 250 # if defined(CONFIG_ROMFS_FS)
 251         if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
 252             && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
 253                 mtd_size =
 254                     PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
 255 #  if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
 256         /* Due to a Hardware Anomaly we need to limit the size of usable
 257          * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 258          * 05000263 - Hardware loop corrupted when taking an ICPLB exception
 259          */
 260 #   if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
 261         if (memory_end >= 56 * 1024 * 1024)
 262                 memory_end = 56 * 1024 * 1024;
 263 #   else
 264         if (memory_end >= 60 * 1024 * 1024)
 265                 memory_end = 60 * 1024 * 1024;
 266 #   endif                               /* CONFIG_DEBUG_HUNT_FOR_ZERO */
 267 #  endif                                /* ANOMALY_05000263 */
 268 # endif                         /* CONFIG_ROMFS_FS */
 269
 270         memory_end -= mtd_size;
 271
 272         if (mtd_size == 0) {
 273                 console_init();
 274                 panic("Don't boot kernel without rootfs attached.\n");
 275         }
 276
 277         /* Relocate MTD image to the top of memory after the uncached memory area */
 278         dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
 279
 280         memory_mtd_start = memory_end;
 281         _ebss = memory_mtd_start;       /* define _ebss for compatible */
 282 #endif                          /* CONFIG_MTD_UCLINUX */
 283
 284 #if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
 285         /* Due to a Hardware Anomaly we need to limit the size of usable
 286          * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
 287          * 05000263 - Hardware loop corrupted when taking an ICPLB exception
 288          */
 289 #if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
 290         if (memory_end >= 56 * 1024 * 1024)
 291                 memory_end = 56 * 1024 * 1024;
 292 #else
 293         if (memory_end >= 60 * 1024 * 1024)
 294                 memory_end = 60 * 1024 * 1024;
 295 #endif                          /* CONFIG_DEBUG_HUNT_FOR_ZERO */
 296         printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
 297 #endif                          /* ANOMALY_05000263 */
 298
 299 #if !defined(CONFIG_MTD_UCLINUX)
 300         memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
 301 #endif
 302         init_mm.start_code = (unsigned long)_stext;
 303         init_mm.end_code = (unsigned long)_etext;
 304         init_mm.end_data = (unsigned long)_edata;
 305         init_mm.brk = (unsigned long)0;
 306
 307         init_leds();
 308
 309         printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
 310         printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
 311         if (bfin_revid() != bfin_compiled_revid())
 312                 printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 313                        bfin_compiled_revid(), bfin_revid());
 314         if (bfin_revid() < SUPPORTED_REVID)
 315                 printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
 316                        CPU, bfin_revid());
 317         printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 318
 319         printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
 320                cclk / 1000000,  sclk / 1000000);
 321
 322 #if defined(ANOMALY_05000273)
 323         if ((cclk >> 1) <= sclk)
 324                 printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
 325 #endif
 326
 327         printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
 328         printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 329
 330         printk(KERN_INFO "Memory map:\n"
 331                KERN_INFO "  text      = 0x%p-0x%p\n"
 332                KERN_INFO "  rodata    = 0x%p-0x%p\n"
 333                KERN_INFO "  data      = 0x%p-0x%p\n"
 334                KERN_INFO "    stack   = 0x%p-0x%p\n"
 335                KERN_INFO "  init      = 0x%p-0x%p\n"
 336                KERN_INFO "  bss       = 0x%p-0x%p\n"
 337                KERN_INFO "  available = 0x%p-0x%p\n"
 338 #ifdef CONFIG_MTD_UCLINUX
 339                KERN_INFO "  rootfs    = 0x%p-0x%p\n"
 340 #endif
 341 #if DMA_UNCACHED_REGION > 0
 342                KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
 343 #endif
 344                , _stext, _etext,
 345                __start_rodata, __end_rodata,
 346                _sdata, _edata,
 347                (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000),
 348                __init_begin, __init_end,
 349                __bss_start, __bss_stop,
 350                (void*)_ramstart, (void*)memory_end
 351 #ifdef CONFIG_MTD_UCLINUX
 352                , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size)
 353 #endif
 354 #if DMA_UNCACHED_REGION > 0
 355                , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend)
 356 #endif
 357                );
 358
 359         /*
 360          * give all the memory to the bootmap allocator,  tell it to put the
 361          * boot mem_map at the start of memory
 362          */
 363         bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT,      /* map goes here */
 364                                          PAGE_OFFSET >> PAGE_SHIFT,
 365                                          memory_end >> PAGE_SHIFT);
 366         /*
 367          * free the usable memory,  we have to make sure we do not free
 368          * the bootmem bitmap so we then reserve it after freeing it :-)
 369          */
 370         free_bootmem(memory_start, memory_end - memory_start);
 371
 372         reserve_bootmem(memory_start, bootmap_size);
 373         /*
 374          * get kmalloc into gear
 375          */
 376         paging_init();
 377
 378         /* check the size of the l1 area */
 379         l1_length = _etext_l1 - _stext_l1;
 380         if (l1_length > L1_CODE_LENGTH)
 381                 panic("L1 memory overflow\n");
 382
 383         l1_length = _ebss_l1 - _sdata_l1;
 384         if (l1_length > L1_DATA_A_LENGTH)
 385                 panic("L1 memory overflow\n");
 386
 387 #ifdef BF561_FAMILY
 388         _bfin_swrst = bfin_read_SICA_SWRST();
 389 #else
 390         _bfin_swrst = bfin_read_SWRST();
 391 #endif
 392
 393         bf53x_cache_init();
 394
 395         printk(KERN_INFO "Hardware Trace Enabled\n");
 396         bfin_write_TBUFCTL(0x03);
 397 }
 398
 399 static int __init topology_init(void)
 400 {
 401 #if defined (CONFIG_BF561)
 402         static struct cpu cpu[2];
 403         register_cpu(&cpu[0], 0);
 404         register_cpu(&cpu[1], 1);
 405         return 0;
 406 #else
 407         static struct cpu cpu[1];
 408         return register_cpu(cpu, 0);
 409 #endif
 410 }
 411
 412 subsys_initcall(topology_init);
 413
 414 #if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
 415 static u16 __init lock_kernel_check(u32 start, u32 end)
 416 {
 417         if ((start <= (u32) _stext && end >= (u32) _end)
 418             || (start >= (u32) _stext && end <= (u32) _end))
 419                 return IN_KERNEL;
 420         return 0;
 421 }
 422
 423 static unsigned short __init
 424 fill_cplbtab(struct cplb_tab *table,
 425              unsigned long start, unsigned long end,
 426              unsigned long block_size, unsigned long cplb_data)
 427 {
 428         int i;
 429
 430         switch (block_size) {
 431         case SIZE_4M:
 432                 i = 3;
 433                 break;
 434         case SIZE_1M:
 435                 i = 2;
 436                 break;
 437         case SIZE_4K:
 438                 i = 1;
 439                 break;
 440         case SIZE_1K:
 441         default:
 442                 i = 0;
 443                 break;
 444         }
 445
 446         cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
 447
 448         while ((start < end) && (table->pos < table->size)) {
 449
 450                 table->tab[table->pos++] = start;
 451
 452                 if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
 453                         table->tab[table->pos++] =
 454                             cplb_data | CPLB_LOCK | CPLB_DIRTY;
 455                 else
 456                         table->tab[table->pos++] = cplb_data;
 457
 458                 start += block_size;
 459         }
 460         return 0;
 461 }
 462
 463 static unsigned short __init
 464 close_cplbtab(struct cplb_tab *table)
 465 {
 466
 467         while (table->pos < table->size) {
 468
 469                 table->tab[table->pos++] = 0;
 470                 table->tab[table->pos++] = 0; /* !CPLB_VALID */
 471         }
 472         return 0;
 473 }
 474
 475 /* helper function */
 476 static void __fill_code_cplbtab(struct cplb_tab *t, int i,
 477                                 u32 a_start, u32 a_end)
 478 {
 479         if (cplb_data[i].psize) {
 480                 fill_cplbtab(t,
 481                                 cplb_data[i].start,
 482                                 cplb_data[i].end,
 483                                 cplb_data[i].psize,
 484                                 cplb_data[i].i_conf);
 485         } else {
 486 #if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
 487                 if (i == SDRAM_KERN) {
 488                         fill_cplbtab(t,
 489                                         cplb_data[i].start,
 490                                         cplb_data[i].end,
 491                                         SIZE_4M,
 492                                         cplb_data[i].i_conf);
 493                 } else {
 494 #endif
 495                         fill_cplbtab(t,
 496                                         cplb_data[i].start,
 497                                         a_start,
 498                                         SIZE_1M,
 499                                         cplb_data[i].i_conf);
 500                         fill_cplbtab(t,
 501                                         a_start,
 502                                         a_end,
 503                                         SIZE_4M,
 504                                         cplb_data[i].i_conf);
 505                         fill_cplbtab(t, a_end,
 506                                         cplb_data[i].end,
 507                                         SIZE_1M,
 508                                         cplb_data[i].i_conf);
 509                 }
 510         }
 511 }
 512
 513 static void __fill_data_cplbtab(struct cplb_tab *t, int i,
 514                                 u32 a_start, u32 a_end)
 515 {
 516         if (cplb_data[i].psize) {
 517                 fill_cplbtab(t,
 518                                 cplb_data[i].start,
 519                                 cplb_data[i].end,
 520                                 cplb_data[i].psize,
 521                                 cplb_data[i].d_conf);
 522         } else {
 523                 fill_cplbtab(t,
 524                                 cplb_data[i].start,
 525                                 a_start, SIZE_1M,
 526                                 cplb_data[i].d_conf);
 527                 fill_cplbtab(t, a_start,
 528                                 a_end, SIZE_4M,
 529                                 cplb_data[i].d_conf);
 530                 fill_cplbtab(t, a_end,
 531                                 cplb_data[i].end,
 532                                 SIZE_1M,
 533                                 cplb_data[i].d_conf);
 534         }
 535 }
 536 static void __init generate_cpl_tables(void)
 537 {
 538
 539         u16 i, j, process;
 540         u32 a_start, a_end, as, ae, as_1m;
 541
 542         struct cplb_tab *t_i = NULL;
 543         struct cplb_tab *t_d = NULL;
 544         struct s_cplb cplb;
 545
 546         cplb.init_i.size = MAX_CPLBS;
 547         cplb.init_d.size = MAX_CPLBS;
 548         cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
 549         cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
 550
 551         cplb.init_i.pos = 0;
 552         cplb.init_d.pos = 0;
 553         cplb.switch_i.pos = 0;
 554         cplb.switch_d.pos = 0;
 555
 556         cplb.init_i.tab = icplb_table;
 557         cplb.init_d.tab = dcplb_table;
 558         cplb.switch_i.tab = ipdt_table;
 559         cplb.switch_d.tab = dpdt_table;
 560
 561         cplb_data[SDRAM_KERN].end = memory_end;
 562
 563 #ifdef CONFIG_MTD_UCLINUX
 564         cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
 565         cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
 566         cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
 567 # if defined(CONFIG_ROMFS_FS)
 568         cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
 569
 570         /*
 571          * The ROMFS_FS size is often not multiple of 1MB.
 572          * This can cause multiple CPLB sets covering the same memory area.
 573          * This will then cause multiple CPLB hit exceptions.
 574          * Workaround: We ensure a contiguous memory area by extending the kernel
 575          * memory section over the mtd section.
 576          * For ROMFS_FS memory must be covered with ICPLBs anyways.
 577          * So there is no difference between kernel and mtd memory setup.
 578          */
 579
 580         cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
 581         cplb_data[SDRAM_RAM_MTD].valid = 0;
 582
 583 # endif
 584 #else
 585         cplb_data[SDRAM_RAM_MTD].valid = 0;
 586 #endif
 587
 588         cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
 589         cplb_data[SDRAM_DMAZ].end = _ramend;
 590
 591         cplb_data[RES_MEM].start = _ramend;
 592         cplb_data[RES_MEM].end = physical_mem_end;
 593
 594         if (reserved_mem_dcache_on)
 595                 cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
 596         else
 597                 cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
 598
 599         if (reserved_mem_icache_on)
 600                 cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
 601         else
 602                 cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
 603
 604         for (i = ZERO_P; i <= L2_MEM; i++) {
 605                 if (!cplb_data[i].valid)
 606                         continue;
 607
 608                 as_1m = cplb_data[i].start % SIZE_1M;
 609
 610                 /*
 611                  * We need to make sure all sections are properly 1M aligned
 612                  * However between Kernel Memory and the Kernel mtd section,
 613                  * depending on the rootfs size, there can be overlapping
 614                  * memory areas.
 615                  */
 616
 617                 if (as_1m && i != L1I_MEM && i != L1D_MEM) {
 618 #ifdef CONFIG_MTD_UCLINUX
 619                         if (i == SDRAM_RAM_MTD) {
 620                                 if ((cplb_data[SDRAM_KERN].end + 1) >
 621                                                 cplb_data[SDRAM_RAM_MTD].start)
 622                                         cplb_data[SDRAM_RAM_MTD].start =
 623                                                 (cplb_data[i].start &
 624                                                  (-2*SIZE_1M)) + SIZE_1M;
 625                                 else
 626                                         cplb_data[SDRAM_RAM_MTD].start =
 627                                                 (cplb_data[i].start &
 628                                                  (-2*SIZE_1M));
 629                         } else
 630 #endif
 631                                 printk(KERN_WARNING
 632                                         "Unaligned Start of %s at 0x%X\n",
 633                                         cplb_data[i].name, cplb_data[i].start);
 634                 }
 635
 636                 as = cplb_data[i].start % SIZE_4M;
 637                 ae = cplb_data[i].end % SIZE_4M;
 638
 639                 if (as)
 640                         a_start = cplb_data[i].start + (SIZE_4M - (as));
 641                 else
 642                         a_start = cplb_data[i].start;
 643
 644                 a_end = cplb_data[i].end - ae;
 645
 646                 for (j = INITIAL_T; j <= SWITCH_T; j++) {
 647
 648                         switch (j) {
 649                         case INITIAL_T:
 650                                 if (cplb_data[i].attr & INITIAL_T) {
 651                                         t_i = &cplb.init_i;
 652                                         t_d = &cplb.init_d;
 653                                         process = 1;
 654                                 } else
 655                                         process = 0;
 656                                 break;
 657                         case SWITCH_T:
 658                                 if (cplb_data[i].attr & SWITCH_T) {
 659                                         t_i = &cplb.switch_i;
 660                                         t_d = &cplb.switch_d;
 661                                         process = 1;
 662                                 } else
 663                                         process = 0;
 664                                 break;
 665                         default:
 666                                         process = 0;
 667                                 break;
 668                         }
 669
 670                         if (!process)
 671                                 continue;
 672                         if (cplb_data[i].attr & I_CPLB)
 673                                 __fill_code_cplbtab(t_i, i, a_start, a_end);
 674
 675                         if (cplb_data[i].attr & D_CPLB)
 676                                 __fill_data_cplbtab(t_d, i, a_start, a_end);
 677                 }
 678         }
 679
 680 /* close tables */
 681
 682         close_cplbtab(&cplb.init_i);
 683         close_cplbtab(&cplb.init_d);
 684
 685         cplb.init_i.tab[cplb.init_i.pos] = -1;
 686         cplb.init_d.tab[cplb.init_d.pos] = -1;
 687         cplb.switch_i.tab[cplb.switch_i.pos] = -1;
 688         cplb.switch_d.tab[cplb.switch_d.pos] = -1;
 689
 690 }
 691
 692 #endif
 693
 694 static u_long get_vco(void)
 695 {
 696         u_long msel;
 697         u_long vco;
 698
 699         msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
 700         if (0 == msel)
 701                 msel = 64;
 702
 703         vco = CONFIG_CLKIN_HZ;
 704         vco >>= (1 & bfin_read_PLL_CTL());      /* DF bit */
 705         vco = msel * vco;
 706         return vco;
 707 }
 708
 709 /*Get the Core clock*/
 710 u_long get_cclk(void)
 711 {
 712         u_long csel, ssel;
 713         if (bfin_read_PLL_STAT() & 0x1)
 714                 return CONFIG_CLKIN_HZ;
 715
 716         ssel = bfin_read_PLL_DIV();
 717         csel = ((ssel >> 4) & 0x03);
 718         ssel &= 0xf;
 719         if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
 720                 return get_vco() / ssel;
 721         return get_vco() >> csel;
 722 }
 723
 724 EXPORT_SYMBOL(get_cclk);
 725
 726 /* Get the System clock */
 727 u_long get_sclk(void)
 728 {
 729         u_long ssel;
 730
 731         if (bfin_read_PLL_STAT() & 0x1)
 732                 return CONFIG_CLKIN_HZ;
 733
 734         ssel = (bfin_read_PLL_DIV() & 0xf);
 735         if (0 == ssel) {
 736                 printk(KERN_WARNING "Invalid System Clock\n");
 737                 ssel = 1;
 738         }
 739
 740         return get_vco() / ssel;
 741 }
 742
 743 EXPORT_SYMBOL(get_sclk);
 744
 745 /*
 746  *      Get CPU information for use by the procfs.
 747  */
 748 static int show_cpuinfo(struct seq_file *m, void *v)
 749 {
 750         char *cpu, *mmu, *fpu, *name;
 751         uint32_t revid;
 752
 753         u_long cclk = 0, sclk = 0;
 754         u_int dcache_size = 0, dsup_banks = 0;
 755
 756         cpu = CPU;
 757         mmu = "none";
 758         fpu = "none";
 759         revid = bfin_revid();
 760         name = bfin_board_name;
 761
 762         cclk = get_cclk();
 763         sclk = get_sclk();
 764
 765         seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n"
 766                    "MMU:\t\t%s\n"
 767                    "FPU:\t\t%s\n"
 768                    "Core Clock:\t%9lu Hz\n"
 769                    "System Clock:\t%9lu Hz\n"
 770                    "BogoMips:\t%lu.%02lu\n"
 771                    "Calibration:\t%lu loops\n",
 772                    cpu, revid, mmu, fpu,
 773                    cclk,
 774                    sclk,
 775                    (loops_per_jiffy * HZ) / 500000,
 776                    ((loops_per_jiffy * HZ) / 5000) % 100,
 777                    (loops_per_jiffy * HZ));
 778         seq_printf(m, "Board Name:\t%s\n", name);
 779         seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20);
 780         seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20);
 781         if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC))
 782                 seq_printf(m, "I-CACHE:\tON\n");
 783         else
 784                 seq_printf(m, "I-CACHE:\tOFF\n");
 785         if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
 786                 seq_printf(m, "D-CACHE:\tON"
 787 #if defined CONFIG_BLKFIN_WB
 788                            " (write-back)"
 789 #elif defined CONFIG_BLKFIN_WT
 790                            " (write-through)"
 791 #endif
 792                            "\n");
 793         else
 794                 seq_printf(m, "D-CACHE:\tOFF\n");
 795
 796
 797         switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
 798                 case ACACHE_BSRAM:
 799                         seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
 800                         dcache_size = 16;
 801                         dsup_banks = 1;
 802                         break;
 803                 case ACACHE_BCACHE:
 804                         seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
 805                         dcache_size = 32;
 806                         dsup_banks = 2;
 807                         break;
 808                 case ASRAM_BSRAM:
 809                         seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
 810                         dcache_size = 0;
 811                         dsup_banks = 0;
 812                         break;
 813                 default:
 814                 break;
 815         }
 816
 817
 818         seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
 819         seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
 820         seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
 821                    BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
 822         seq_printf(m,
 823                    "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
 824                    dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
 825                    BLKFIN_DLINES);
 826 #ifdef CONFIG_BLKFIN_CACHE_LOCK
 827         switch (read_iloc()) {
 828         case WAY0_L:
 829                 seq_printf(m, "Way0 Locked-Down\n");
 830                 break;
 831         case WAY1_L:
 832                 seq_printf(m, "Way1 Locked-Down\n");
 833                 break;
 834         case WAY01_L:
 835                 seq_printf(m, "Way0,Way1 Locked-Down\n");
 836                 break;
 837         case WAY2_L:
 838                 seq_printf(m, "Way2 Locked-Down\n");
 839                 break;
 840         case WAY02_L:
 841                 seq_printf(m, "Way0,Way2 Locked-Down\n");
 842                 break;
 843         case WAY12_L:
 844                 seq_printf(m, "Way1,Way2 Locked-Down\n");
 845                 break;
 846         case WAY012_L:
 847                 seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
 848                 break;
 849         case WAY3_L:
 850                 seq_printf(m, "Way3 Locked-Down\n");
 851                 break;
 852         case WAY03_L:
 853                 seq_printf(m, "Way0,Way3 Locked-Down\n");
 854                 break;
 855         case WAY13_L:
 856                 seq_printf(m, "Way1,Way3 Locked-Down\n");
 857                 break;
 858         case WAY013_L:
 859                 seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
 860                 break;
 861         case WAY32_L:
 862                 seq_printf(m, "Way3,Way2 Locked-Down\n");
 863                 break;
 864         case WAY320_L:
 865                 seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
 866                 break;
 867         case WAY321_L:
 868                 seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
 869                 break;
 870         case WAYALL_L:
 871                 seq_printf(m, "All Ways are locked\n");
 872                 break;
 873         default:
 874                 seq_printf(m, "No Ways are locked\n");
 875         }
 876 #endif
 877         return 0;
 878 }
 879
 880 static void *c_start(struct seq_file *m, loff_t *pos)
 881 {
 882         return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
 883 }
 884
 885 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 886 {
 887         ++*pos;
 888         return c_start(m, pos);
 889 }
 890
 891 static void c_stop(struct seq_file *m, void *v)
 892 {
 893 }
 894
 895 struct seq_operations cpuinfo_op = {
 896         .start = c_start,
 897         .next = c_next,
 898         .stop = c_stop,
 899         .show = show_cpuinfo,
 900 };
 901
 902 void __init cmdline_init(const char *r0)
 903 {
 904         if (r0)
 905                 strncpy(command_line, r0, COMMAND_LINE_SIZE);
 906 }