]> err.no Git - linux-2.6/blob - arch/arm/mach-s3c2440/mach-osiris.c
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
[linux-2.6] / arch / arm / mach-s3c2440 / mach-osiris.c
1 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
2  *
3  * Copyright (c) 2005 Simtec Electronics
4  *      http://armlinux.simtec.co.uk/
5  *      Ben Dooks <ben@simtec.co.uk>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10 */
11
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/interrupt.h>
15 #include <linux/list.h>
16 #include <linux/timer.h>
17 #include <linux/init.h>
18 #include <linux/device.h>
19 #include <linux/serial_core.h>
20
21 #include <asm/mach/arch.h>
22 #include <asm/mach/map.h>
23 #include <asm/mach/irq.h>
24
25 #include <asm/arch/osiris-map.h>
26 #include <asm/arch/osiris-cpld.h>
27
28 #include <asm/hardware.h>
29 #include <asm/io.h>
30 #include <asm/irq.h>
31 #include <asm/mach-types.h>
32
33 #include <asm/arch/regs-serial.h>
34 #include <asm/arch/regs-gpio.h>
35 #include <asm/arch/regs-mem.h>
36 #include <asm/arch/regs-lcd.h>
37 #include <asm/arch/nand.h>
38
39 #include <linux/mtd/mtd.h>
40 #include <linux/mtd/nand.h>
41 #include <linux/mtd/nand_ecc.h>
42 #include <linux/mtd/partitions.h>
43
44 #include <asm/plat-s3c24xx/clock.h>
45 #include <asm/plat-s3c24xx/devs.h>
46 #include <asm/plat-s3c24xx/cpu.h>
47
48 /* onboard perihpheral map */
49
50 static struct map_desc osiris_iodesc[] __initdata = {
51   /* ISA IO areas (may be over-written later) */
52
53   {
54           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
55           .pfn          = __phys_to_pfn(S3C2410_CS5),
56           .length       = SZ_16M,
57           .type         = MT_DEVICE,
58   }, {
59           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
60           .pfn          = __phys_to_pfn(S3C2410_CS5),
61           .length       = SZ_16M,
62           .type         = MT_DEVICE,
63   },
64
65   /* CPLD control registers */
66
67   {
68           .virtual      = (u32)OSIRIS_VA_CTRL1,
69           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL1),
70           .length       = SZ_16K,
71           .type         = MT_DEVICE,
72   }, {
73           .virtual      = (u32)OSIRIS_VA_CTRL2,
74           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL2),
75           .length       = SZ_16K,
76           .type         = MT_DEVICE,
77   },
78 };
79
80 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
81 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
82 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
83
84 static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
85         [0] = {
86                 .name           = "uclk",
87                 .divisor        = 1,
88                 .min_baud       = 0,
89                 .max_baud       = 0,
90         },
91         [1] = {
92                 .name           = "pclk",
93                 .divisor        = 1,
94                 .min_baud       = 0,
95                 .max_baud       = 0,
96         }
97 };
98
99 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
100         [0] = {
101                 .hwport      = 0,
102                 .flags       = 0,
103                 .ucon        = UCON,
104                 .ulcon       = ULCON,
105                 .ufcon       = UFCON,
106                 .clocks      = osiris_serial_clocks,
107                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
108         },
109         [1] = {
110                 .hwport      = 1,
111                 .flags       = 0,
112                 .ucon        = UCON,
113                 .ulcon       = ULCON,
114                 .ufcon       = UFCON,
115                 .clocks      = osiris_serial_clocks,
116                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
117         },
118         [2] = {
119                 .hwport      = 2,
120                 .flags       = 0,
121                 .ucon        = UCON,
122                 .ulcon       = ULCON,
123                 .ufcon       = UFCON,
124                 .clocks      = osiris_serial_clocks,
125                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
126         }
127 };
128
129 /* NAND Flash on Osiris board */
130
131 static int external_map[]   = { 2 };
132 static int chip0_map[]      = { 0 };
133 static int chip1_map[]      = { 1 };
134
135 static struct mtd_partition osiris_default_nand_part[] = {
136         [0] = {
137                 .name   = "Boot Agent",
138                 .size   = SZ_16K,
139                 .offset = 0,
140         },
141         [1] = {
142                 .name   = "/boot",
143                 .size   = SZ_4M - SZ_16K,
144                 .offset = SZ_16K,
145         },
146         [2] = {
147                 .name   = "user1",
148                 .offset = SZ_4M,
149                 .size   = SZ_32M - SZ_4M,
150         },
151         [3] = {
152                 .name   = "user2",
153                 .offset = SZ_32M,
154                 .size   = MTDPART_SIZ_FULL,
155         }
156 };
157
158 /* the Osiris has 3 selectable slots for nand-flash, the two
159  * on-board chip areas, as well as the external slot.
160  *
161  * Note, there is no current hot-plug support for the External
162  * socket.
163 */
164
165 static struct s3c2410_nand_set osiris_nand_sets[] = {
166         [1] = {
167                 .name           = "External",
168                 .nr_chips       = 1,
169                 .nr_map         = external_map,
170                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
171                 .partitions     = osiris_default_nand_part,
172         },
173         [0] = {
174                 .name           = "chip0",
175                 .nr_chips       = 1,
176                 .nr_map         = chip0_map,
177                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
178                 .partitions     = osiris_default_nand_part,
179         },
180         [2] = {
181                 .name           = "chip1",
182                 .nr_chips       = 1,
183                 .nr_map         = chip1_map,
184                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
185                 .partitions     = osiris_default_nand_part,
186         },
187 };
188
189 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
190 {
191         unsigned int tmp;
192
193         slot = set->nr_map[slot] & 3;
194
195         pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
196                  slot, set, set->nr_map);
197
198         tmp = __raw_readb(OSIRIS_VA_CTRL1);
199         tmp &= ~OSIRIS_CTRL1_NANDSEL;
200         tmp |= slot;
201
202         pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
203
204         __raw_writeb(tmp, OSIRIS_VA_CTRL1);
205 }
206
207 static struct s3c2410_platform_nand osiris_nand_info = {
208         .tacls          = 25,
209         .twrph0         = 60,
210         .twrph1         = 60,
211         .nr_sets        = ARRAY_SIZE(osiris_nand_sets),
212         .sets           = osiris_nand_sets,
213         .select_chip    = osiris_nand_select,
214 };
215
216 /* PCMCIA control and configuration */
217
218 static struct resource osiris_pcmcia_resource[] = {
219         [0] = {
220                 .start  = 0x0f000000,
221                 .end    = 0x0f100000,
222                 .flags  = IORESOURCE_MEM,
223         },
224         [1] = {
225                 .start  = 0x0c000000,
226                 .end    = 0x0c100000,
227                 .flags  = IORESOURCE_MEM,
228         }
229 };
230
231 static struct platform_device osiris_pcmcia = {
232         .name           = "osiris-pcmcia",
233         .id             = -1,
234         .num_resources  = ARRAY_SIZE(osiris_pcmcia_resource),
235         .resource       = osiris_pcmcia_resource,
236 };
237
238 /* Standard Osiris devices */
239
240 static struct platform_device *osiris_devices[] __initdata = {
241         &s3c_device_i2c,
242         &s3c_device_nand,
243         &osiris_pcmcia,
244 };
245
246 static struct clk *osiris_clocks[] = {
247         &s3c24xx_dclk0,
248         &s3c24xx_dclk1,
249         &s3c24xx_clkout0,
250         &s3c24xx_clkout1,
251         &s3c24xx_uclk,
252 };
253
254 static void __init osiris_map_io(void)
255 {
256         unsigned long flags;
257
258         /* initialise the clocks */
259
260         s3c24xx_dclk0.parent = NULL;
261         s3c24xx_dclk0.rate   = 12*1000*1000;
262
263         s3c24xx_dclk1.parent = NULL;
264         s3c24xx_dclk1.rate   = 24*1000*1000;
265
266         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
267         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
268
269         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
270
271         s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
272
273         s3c_device_nand.dev.platform_data = &osiris_nand_info;
274
275         s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
276         s3c24xx_init_clocks(0);
277         s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
278
279         /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
280
281         local_irq_save(flags);
282         __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
283         local_irq_restore(flags);
284
285         /* write-protect line to the NAND */
286         s3c2410_gpio_setpin(S3C2410_GPA0, 1);
287 }
288
289 static void __init osiris_init(void)
290 {
291         platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
292 };
293
294 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
295         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
296         .phys_io        = S3C2410_PA_UART,
297         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
298         .boot_params    = S3C2410_SDRAM_PA + 0x100,
299         .map_io         = osiris_map_io,
300         .init_machine   = osiris_init,
301         .init_irq       = s3c24xx_init_irq,
302         .timer          = &s3c24xx_timer,
303 MACHINE_END