err.no Git - linux-2.6/blob - arch/arm/mach-s3c2410/mach-qt2410.c

   1 /* linux/arch/arm/mach-s3c2410/mach-qt2410.c
   2  *
   3  * Copyright (C) 2006 by OpenMoko, Inc.
   4  * Author: Harald Welte <laforge@openmoko.org>
   5  * All rights reserved.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  *
  22  */
  23
  24 #include <linux/kernel.h>
  25 #include <linux/types.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/list.h>
  28 #include <linux/timer.h>
  29 #include <linux/init.h>
  30 #include <linux/sysdev.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/serial_core.h>
  33 #include <linux/spi/spi.h>
  34 #include <linux/spi/spi_bitbang.h>
  35
  36 #include <linux/mtd/mtd.h>
  37 #include <linux/mtd/nand.h>
  38 #include <linux/mtd/nand_ecc.h>
  39 #include <linux/mtd/partitions.h>
  40
  41 #include <asm/mach/arch.h>
  42 #include <asm/mach/map.h>
  43 #include <asm/mach/irq.h>
  44
  45 #include <asm/hardware.h>
  46 #include <asm/io.h>
  47 #include <asm/irq.h>
  48 #include <asm/mach-types.h>
  49
  50 #include <asm/arch/regs-gpio.h>
  51 #include <asm/arch/leds-gpio.h>
  52 #include <asm/plat-s3c/regs-serial.h>
  53 #include <asm/arch/fb.h>
  54 #include <asm/plat-s3c/nand.h>
  55 #include <asm/plat-s3c24xx/udc.h>
  56 #include <asm/arch/spi.h>
  57 #include <asm/arch/spi-gpio.h>
  58
  59 #include <asm/plat-s3c24xx/common-smdk.h>
  60 #include <asm/plat-s3c24xx/devs.h>
  61 #include <asm/plat-s3c24xx/cpu.h>
  62 #include <asm/plat-s3c24xx/pm.h>
  63
  64 static struct map_desc qt2410_iodesc[] __initdata = {
  65         { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
  66 };
  67
  68 #define UCON S3C2410_UCON_DEFAULT
  69 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  70 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  71
  72 static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
  73         [0] = {
  74                 .hwport      = 0,
  75                 .flags       = 0,
  76                 .ucon        = UCON,
  77                 .ulcon       = ULCON,
  78                 .ufcon       = UFCON,
  79         },
  80         [1] = {
  81                 .hwport      = 1,
  82                 .flags       = 0,
  83                 .ucon        = UCON,
  84                 .ulcon       = ULCON,
  85                 .ufcon       = UFCON,
  86         },
  87         [2] = {
  88                 .hwport      = 2,
  89                 .flags       = 0,
  90                 .ucon        = UCON,
  91                 .ulcon       = ULCON,
  92                 .ufcon       = UFCON,
  93         }
  94 };
  95
  96 /* LCD driver info */
  97
  98 static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
  99         {
 100                 /* Configuration for 640x480 SHARP LQ080V3DG01 */
 101                 .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
 102                            S3C2410_LCDCON1_TFT |
 103                            S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
 104
 105                 .lcdcon2 = S3C2410_LCDCON2_VBPD(18) |   /* 19 */
 106                            S3C2410_LCDCON2_LINEVAL(479) |
 107                            S3C2410_LCDCON2_VFPD(10) |   /* 11 */
 108                            S3C2410_LCDCON2_VSPW(14),    /* 15 */
 109
 110                 .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
 111                            S3C2410_LCDCON4_HSPW(95),    /* 96 */
 112
 113                 .lcdcon5 = S3C2410_LCDCON5_FRM565 |
 114                            S3C2410_LCDCON5_INVVLINE |
 115                            S3C2410_LCDCON5_INVVFRAME |
 116                            S3C2410_LCDCON5_PWREN |
 117                            S3C2410_LCDCON5_HWSWP,
 118
 119                 .type           = S3C2410_LCDCON1_TFT,
 120                 .width          = 640,
 121                 .height         = 480,
 122
 123                 .xres           = 640,
 124                 .yres           = 480,
 125                 .bpp            = 16,
 126                 .left_margin    = 44,
 127                 .right_margin   = 116,
 128                 .hsync_len      = 96,
 129                 .upper_margin   = 19,
 130                 .lower_margin   = 11,
 131                 .vsync_len      = 15,
 132         },
 133         {
 134                 /* Configuration for 480x640 toppoly TD028TTEC1 */
 135                 .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
 136                            S3C2410_LCDCON1_TFT |
 137                            S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
 138
 139                 .lcdcon2 = S3C2410_LCDCON2_VBPD(1) |    /* 2 */
 140                            S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
 141                            S3C2410_LCDCON2_VFPD(3) |    /* 4 */
 142                            S3C2410_LCDCON2_VSPW(1),     /* 2 */
 143
 144                 .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
 145                            S3C2410_LCDCON4_HSPW(7),     /* 8 */
 146
 147                 .lcdcon5 = S3C2410_LCDCON5_FRM565 |
 148                            S3C2410_LCDCON5_INVVLINE |
 149                            S3C2410_LCDCON5_INVVFRAME |
 150                            S3C2410_LCDCON5_PWREN |
 151                            S3C2410_LCDCON5_HWSWP,
 152
 153                 .type           = S3C2410_LCDCON1_TFT,
 154                 .width          = 480,
 155                 .height         = 640,
 156                 .xres           = 480,
 157                 .yres           = 640,
 158                 .bpp            = 16,
 159                 .left_margin    = 8,
 160                 .right_margin   = 24,
 161                 .hsync_len      = 8,
 162                 .upper_margin   = 2,
 163                 .lower_margin   = 4,
 164                 .vsync_len      = 2,
 165         },
 166         {
 167                 /* Config for 240x320 LCD */
 168                 .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
 169                            S3C2410_LCDCON1_TFT |
 170                            S3C2410_LCDCON1_CLKVAL(0x04),
 171
 172                 .lcdcon2 = S3C2410_LCDCON2_VBPD(1) |
 173                            S3C2410_LCDCON2_LINEVAL(319) |
 174                            S3C2410_LCDCON2_VFPD(6) |
 175                            S3C2410_LCDCON2_VSPW(3),
 176
 177                 .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
 178                            S3C2410_LCDCON4_HSPW(3),
 179
 180                 .lcdcon5 = S3C2410_LCDCON5_FRM565 |
 181                            S3C2410_LCDCON5_INVVLINE |
 182                            S3C2410_LCDCON5_INVVFRAME |
 183                            S3C2410_LCDCON5_PWREN |
 184                            S3C2410_LCDCON5_HWSWP,
 185
 186                 .type           = S3C2410_LCDCON1_TFT,
 187                 .width          = 240,
 188                 .height         = 320,
 189                 .xres           = 240,
 190                 .yres           = 320,
 191                 .bpp            = 16,
 192                 .left_margin    = 13,
 193                 .right_margin   = 8,
 194                 .hsync_len      = 4,
 195                 .upper_margin   = 2,
 196                 .lower_margin   = 7,
 197                 .vsync_len      = 4,
 198         },
 199 };
 200
 201
 202 static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
 203         .displays       = qt2410_lcd_cfg,
 204         .num_displays   = ARRAY_SIZE(qt2410_lcd_cfg),
 205         .default_display = 0,
 206
 207         .lpcsel         = ((0xCE6) & ~7) | 1<<4,
 208 };
 209
 210 /* CS8900 */
 211
 212 static struct resource qt2410_cs89x0_resources[] = {
 213         [0] = {
 214                 .start  = 0x19000000,
 215                 .end    = 0x19000000 + 16,
 216                 .flags  = IORESOURCE_MEM,
 217         },
 218         [1] = {
 219                 .start  = IRQ_EINT9,
 220                 .end    = IRQ_EINT9,
 221                 .flags  = IORESOURCE_IRQ,
 222         },
 223 };
 224
 225 static struct platform_device qt2410_cs89x0 = {
 226         .name           = "cirrus-cs89x0",
 227         .num_resources  = ARRAY_SIZE(qt2410_cs89x0_resources),
 228         .resource       = qt2410_cs89x0_resources,
 229 };
 230
 231 /* LED */
 232
 233 static struct s3c24xx_led_platdata qt2410_pdata_led = {
 234         .gpio           = S3C2410_GPB0,
 235         .flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 236         .name           = "led",
 237         .def_trigger    = "timer",
 238 };
 239
 240 static struct platform_device qt2410_led = {
 241         .name           = "s3c24xx_led",
 242         .id             = 0,
 243         .dev            = {
 244                 .platform_data = &qt2410_pdata_led,
 245         },
 246 };
 247
 248 /* SPI */
 249
 250 static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 251 {
 252         switch (cs) {
 253         case BITBANG_CS_ACTIVE:
 254                 s3c2410_gpio_setpin(S3C2410_GPB5, 0);
 255                 break;
 256         case BITBANG_CS_INACTIVE:
 257                 s3c2410_gpio_setpin(S3C2410_GPB5, 1);
 258                 break;
 259         }
 260 }
 261
 262 static struct s3c2410_spigpio_info spi_gpio_cfg = {
 263         .pin_clk        = S3C2410_GPG7,
 264         .pin_mosi       = S3C2410_GPG6,
 265         .pin_miso       = S3C2410_GPG5,
 266         .chip_select    = &spi_gpio_cs,
 267 };
 268
 269
 270 static struct platform_device qt2410_spi = {
 271         .name             = "s3c24xx-spi-gpio",
 272         .id               = 1,
 273         .dev = {
 274                 .platform_data = &spi_gpio_cfg,
 275         },
 276 };
 277
 278 /* Board devices */
 279
 280 static struct platform_device *qt2410_devices[] __initdata = {
 281         &s3c_device_usb,
 282         &s3c_device_lcd,
 283         &s3c_device_wdt,
 284         &s3c_device_i2c,
 285         &s3c_device_iis,
 286         &s3c_device_sdi,
 287         &s3c_device_usbgadget,
 288         &qt2410_spi,
 289         &qt2410_cs89x0,
 290         &qt2410_led,
 291 };
 292
 293 static struct mtd_partition qt2410_nand_part[] = {
 294         [0] = {
 295                 .name   = "U-Boot",
 296                 .size   = 0x30000,
 297                 .offset = 0,
 298         },
 299         [1] = {
 300                 .name   = "U-Boot environment",
 301                 .offset = 0x30000,
 302                 .size   = 0x4000,
 303         },
 304         [2] = {
 305                 .name   = "kernel",
 306                 .offset = 0x34000,
 307                 .size   = SZ_2M,
 308         },
 309         [3] = {
 310                 .name   = "initrd",
 311                 .offset = 0x234000,
 312                 .size   = SZ_4M,
 313         },
 314         [4] = {
 315                 .name   = "jffs2",
 316                 .offset = 0x634000,
 317                 .size   = 0x39cc000,
 318         },
 319 };
 320
 321 static struct s3c2410_nand_set qt2410_nand_sets[] = {
 322         [0] = {
 323                 .name           = "NAND",
 324                 .nr_chips       = 1,
 325                 .nr_partitions  = ARRAY_SIZE(qt2410_nand_part),
 326                 .partitions     = qt2410_nand_part,
 327         },
 328 };
 329
 330 /* choose a set of timings which should suit most 512Mbit
 331  * chips and beyond.
 332  */
 333
 334 static struct s3c2410_platform_nand qt2410_nand_info = {
 335         .tacls          = 20,
 336         .twrph0         = 60,
 337         .twrph1         = 20,
 338         .nr_sets        = ARRAY_SIZE(qt2410_nand_sets),
 339         .sets           = qt2410_nand_sets,
 340 };
 341
 342 /* UDC */
 343
 344 static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
 345 };
 346
 347 static char tft_type = 's';
 348
 349 static int __init qt2410_tft_setup(char *str)
 350 {
 351         tft_type = str[0];
 352         return 1;
 353 }
 354
 355 __setup("tft=", qt2410_tft_setup);
 356
 357 static void __init qt2410_map_io(void)
 358 {
 359         s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
 360         s3c24xx_init_clocks(12*1000*1000);
 361         s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 362 }
 363
 364 static void __init qt2410_machine_init(void)
 365 {
 366         s3c_device_nand.dev.platform_data = &qt2410_nand_info;
 367
 368         switch (tft_type) {
 369         case 'p': /* production */
 370                 qt2410_fb_info.default_display = 1;
 371                 break;
 372         case 'b': /* big */
 373                 qt2410_fb_info.default_display = 0;
 374                 break;
 375         case 's': /* small */
 376         default:
 377                 qt2410_fb_info.default_display = 2;
 378                 break;
 379         }
 380         s3c24xx_fb_set_platdata(&qt2410_fb_info);
 381
 382         s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
 383         s3c2410_gpio_setpin(S3C2410_GPB0, 1);
 384
 385         s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 386
 387         s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 388
 389         platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 390         s3c2410_pm_init();
 391 }
 392
 393 MACHINE_START(QT2410, "QT2410")
 394         .phys_io        = S3C2410_PA_UART,
 395         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 396         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 397         .map_io         = qt2410_map_io,
 398         .init_irq       = s3c24xx_init_irq,
 399         .init_machine   = qt2410_machine_init,
 400         .timer          = &s3c24xx_timer,
 401 MACHINE_END
 402
 403