]> err.no Git - linux-2.6/blob - arch/arm/mach-ixp4xx/gtwx5715-pci.c
[ARM] 4408/2: Fixup support for gtwx5715 ixp4xx board
[linux-2.6] / arch / arm / mach-ixp4xx / gtwx5715-pci.c
1 /*
2  * arch/arm/mach-ixp4xx/gtwx5715-pci.c
3  *
4  * Gemtek GTWX5715 (Linksys WRV54G) board setup
5  *
6  * Copyright (C) 2004 George T. Joseph
7  * Derived from Coyote
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License
11  * as published by the Free Software Foundation; either version 2
12  * of the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
22  *
23  */
24
25 #include <linux/pci.h>
26 #include <linux/init.h>
27 #include <linux/delay.h>
28 #include <linux/irq.h>
29
30 #include <asm/mach-types.h>
31 #include <asm/hardware.h>
32 #include <asm/irq.h>
33 #include <asm/arch/gtwx5715.h>
34 #include <asm/mach/pci.h>
35
36 /*
37  * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
38  * Slot 0 isn't actually populated with a card connector but
39  * we initialize it anyway in case a future version has the
40  * slot populated or someone with good soldering skills has
41  * some free time.
42  */
43 void __init gtwx5715_pci_preinit(void)
44 {
45         set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
46         set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
47         set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
48         set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
49
50         ixp4xx_pci_preinit();
51 }
52
53
54 static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
55 {
56         int rc;
57         static int gtwx5715_irqmap
58                         [GTWX5715_PCI_SLOT_COUNT]
59                         [GTWX5715_PCI_INT_PIN_COUNT] = {
60         {GTWX5715_PCI_SLOT0_INTA_IRQ, GTWX5715_PCI_SLOT0_INTB_IRQ},
61         {GTWX5715_PCI_SLOT1_INTA_IRQ, GTWX5715_PCI_SLOT1_INTB_IRQ},
62 };
63
64         if (slot >= GTWX5715_PCI_SLOT_COUNT ||
65                         pin >= GTWX5715_PCI_INT_PIN_COUNT) rc = -1;
66         else
67                 rc = gtwx5715_irqmap[slot][pin-1];
68
69         printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc);
70         return(rc);
71 }
72
73 struct hw_pci gtwx5715_pci __initdata = {
74         .nr_controllers = 1,
75         .preinit =        gtwx5715_pci_preinit,
76         .swizzle =        pci_std_swizzle,
77         .setup =          ixp4xx_setup,
78         .scan =           ixp4xx_scan_bus,
79         .map_irq =        gtwx5715_map_irq,
80 };
81
82 int __init gtwx5715_pci_init(void)
83 {
84         if (machine_is_gtwx5715())
85         {
86                 pci_common_init(&gtwx5715_pci);
87         }
88
89         return 0;
90 }
91
92 subsys_initcall(gtwx5715_pci_init);