2 * arch/arm/mach-ixp2000/ixdp2400.c
4 * IXDP2400 platform support
6 * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
7 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
9 * Copyright (C) 2002 Intel Corp.
10 * Copyright (C) 2003-2004 MontaVista Software, Inc.
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
17 #include <linux/config.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
21 #include <linux/sched.h>
22 #include <linux/interrupt.h>
23 #include <linux/device.h>
24 #include <linux/bitops.h>
25 #include <linux/pci.h>
26 #include <linux/ioport.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
32 #include <asm/pgtable.h>
34 #include <asm/system.h>
35 #include <asm/hardware.h>
36 #include <asm/mach-types.h>
38 #include <asm/mach/pci.h>
39 #include <asm/mach/map.h>
40 #include <asm/mach/irq.h>
41 #include <asm/mach/time.h>
42 #include <asm/mach/flash.h>
43 #include <asm/mach/arch.h>
45 /*************************************************************************
47 *************************************************************************/
48 static void __init ixdp2400_timer_init(void)
50 int numerator, denominator;
51 int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
53 numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
54 denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
56 ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
59 static struct sys_timer ixdp2400_timer = {
60 .init = ixdp2400_timer_init,
61 .offset = ixp2000_gettimeoffset,
64 /*************************************************************************
66 *************************************************************************/
67 void __init ixdp2400_pci_preinit(void)
69 ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
70 ixp2000_pci_preinit();
73 int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
75 sys->mem_offset = 0xe0000000;
77 ixp2000_pci_setup(nr, sys);
82 static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
84 if (ixdp2x00_master_npu()) {
87 * Root bus devices. Slave NPU is only one with interrupt.
88 * Everything else, we just return -1 b/c nothing else
89 * on the root bus has interrupts.
92 if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
93 return IRQ_IXDP2400_INGRESS_NPU;
99 * Bridge behind the PMC slot.
100 * NOTE: Only INTA from the PMC slot is routed. VERY BAD.
102 if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
103 dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
104 !dev->bus->parent->self->bus->parent)
105 return IRQ_IXDP2400_PMC;
108 * Device behind the first bridge
110 if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
112 case IXDP2400_MASTER_ENET_DEVFN:
113 return IRQ_IXDP2400_ENET;
115 case IXDP2400_MEDIA_DEVFN:
116 return IRQ_IXDP2400_MEDIA_PCI;
118 case IXDP2400_SWITCH_FABRIC_DEVFN:
119 return IRQ_IXDP2400_SF_PCI;
121 case IXDP2X00_PMC_DEVFN:
122 return IRQ_IXDP2400_PMC;
127 } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
131 static void ixdp2400_pci_postinit(void)
135 if (ixdp2x00_master_npu()) {
136 dev = pci_find_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
137 pci_remove_bus_device(dev);
139 dev = pci_find_slot(1, IXDP2400_MASTER_ENET_DEVFN);
140 pci_remove_bus_device(dev);
142 ixdp2x00_slave_pci_postinit();
146 static struct hw_pci ixdp2400_pci __initdata = {
148 .setup = ixdp2400_pci_setup,
149 .preinit = ixdp2400_pci_preinit,
150 .postinit = ixdp2400_pci_postinit,
151 .scan = ixp2000_pci_scan_bus,
152 .map_irq = ixdp2400_pci_map_irq,
155 int __init ixdp2400_pci_init(void)
157 if (machine_is_ixdp2400())
158 pci_common_init(&ixdp2400_pci);
163 subsys_initcall(ixdp2400_pci_init);
165 void ixdp2400_init_irq(void)
167 ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
170 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
171 /* Maintainer: MontaVista Software, Inc. */
172 .phys_ram = 0x00000000,
173 .phys_io = IXP2000_UART_PHYS_BASE,
174 .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
175 .boot_params = 0x00000100,
176 .map_io = ixdp2x00_map_io,
177 .init_irq = ixdp2400_init_irq,
178 .timer = &ixdp2400_timer,
179 .init_machine = ixdp2x00_init_machine,