3 menu "Atmel AT91 System-on-Chip"
6 prompt "Atmel AT91 Processor"
11 config ARCH_AT91SAM9260
12 bool "AT91SAM9260 or AT91SAM9XE"
14 config ARCH_AT91SAM9261
17 config ARCH_AT91SAM9263
20 config ARCH_AT91SAM9RL
32 # ----------------------------------------------------------
36 comment "AT91RM9200 Board Type"
39 bool "Ajeco 1ARM Single Board Computer"
40 depends on ARCH_AT91RM9200
42 Select this if you are using Ajeco's 1ARM Single Board Computer.
43 <http://www.ajeco.fi/products.htm>
45 config ARCH_AT91RM9200DK
46 bool "Atmel AT91RM9200-DK Development board"
47 depends on ARCH_AT91RM9200
49 Select this if you are using Atmel's AT91RM9200-DK Development board.
52 config MACH_AT91RM9200EK
53 bool "Atmel AT91RM9200-EK Evaluation Kit"
54 depends on ARCH_AT91RM9200
56 Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
57 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
61 depends on ARCH_AT91RM9200
63 Select this if you are using Cogent's CSB337 board.
64 <http://www.cogcomp.com/csb_csb337.htm>
68 depends on ARCH_AT91RM9200
70 Select this if you are using Cogent's CSB637 board.
71 <http://www.cogcomp.com/csb_csb637.htm>
74 bool "Conitec ARM&EVA"
75 depends on ARCH_AT91RM9200
77 Select this if you are using Conitec's AT91RM9200-MCU-Module.
78 <http://www.conitec.net/english/linuxboard.htm>
81 bool "Embest ATEB9200"
82 depends on ARCH_AT91RM9200
84 Select this if you are using Embest's ATEB9200 board.
85 <http://www.embedinfo.com/english/product/ATEB9200.asp>
88 bool "KwikByte KB920x"
89 depends on ARCH_AT91RM9200
91 Select this if you are using KwikByte's KB920x board.
92 <http://kwikbyte.com/KB9202_description_new.htm>
94 config MACH_PICOTUX2XX
96 depends on ARCH_AT91RM9200
98 Select this if you are using a picotux 200.
99 <http://www.picotux.com/>
102 bool "Sperry-Sun KAFA board"
103 depends on ARCH_AT91RM9200
105 Select this if you are using Sperry-Sun's KAFA board.
109 # ----------------------------------------------------------
113 comment "AT91SAM9260 Variants"
115 config ARCH_AT91SAM9260_SAM9XE
117 depends on ARCH_AT91SAM9260
119 Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
120 They are basically AT91SAM9260s with various sizes of embedded Flash.
122 comment "AT91SAM9260 / AT91SAM9XE Board Type"
124 config MACH_AT91SAM9260EK
125 bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
126 depends on ARCH_AT91SAM9260
128 Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
129 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
133 # ----------------------------------------------------------
137 comment "AT91SAM9261 Board Type"
139 config MACH_AT91SAM9261EK
140 bool "Atmel AT91SAM9261-EK Evaluation Kit"
141 depends on ARCH_AT91SAM9261
143 Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
144 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
148 # ----------------------------------------------------------
152 comment "AT91SAM9263 Board Type"
154 config MACH_AT91SAM9263EK
155 bool "Atmel AT91SAM9263-EK Evaluation Kit"
156 depends on ARCH_AT91SAM9263
158 Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
159 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
163 # ----------------------------------------------------------
167 comment "AT91SAM9RL Board Type"
169 config MACH_AT91SAM9RLEK
170 bool "Atmel AT91SAM9RL-EK Evaluation Kit"
171 depends on ARCH_AT91SAM9RL
173 Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
177 # ----------------------------------------------------------
181 comment "AT91X40 Board Type"
184 bool "Atmel AT91EB01 Evaluation Kit"
186 Select this if you are using Atmel's AT91EB01 Evaluation Kit.
187 It is also a popular target for simulators such as GDB's
188 ARM simulator (commonly known as the ARMulator) and the
193 # ----------------------------------------------------------
195 comment "AT91 Board Options"
197 config MTD_AT91_DATAFLASH_CARD
198 bool "Enable DataFlash Card support"
199 depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
201 Enable support for the DataFlash card.
203 config MTD_NAND_AT91_BUSWIDTH_16
204 bool "Enable 16-bit data bus interface to NAND flash"
205 depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
207 On AT91SAM926x boards both types of NAND flash can be present
208 (8 and 16 bit data bus width).
210 # ----------------------------------------------------------
212 comment "AT91 Feature Selections"
214 config AT91_PROGRAMMABLE_CLOCKS
215 bool "Programmable Clocks"
217 Select this if you need to program one or more of the PCK0..PCK3
218 programmable clock outputs.