1 Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
4 1) Currently supported are:
7 - Compro VideoMate H900
9 - Conexant Raptor PAL/SECAM devkit
11 2) Some people have problems getting the i2c bus to work.
12 The symptom is that the eeprom cannot be read and the card is
13 unusable. This is probably fixed, but if you have problems
14 then post to the video4linux or ivtv-users mailinglist.
16 3) VBI (raw or sliced) has not yet been implemented.
18 4) MPEG indexing is not yet implemented.
20 5) The driver is still a bit rough around the edges, this should
26 The firmware needs to be extracted from the Windows Hauppauge HVR-1600
27 driver, available here:
29 http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
31 Unzip, then copy the following files to the firmware directory
32 and rename them as follows:
34 Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
35 Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
36 Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw