attached to /proc/acpi/hotkey/poll_method, which is dnyamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
+ acpi_generic_hotkey [HW,ACPI]
+ Allow consolidated generic hotkey driver to
+ over-ride platform specific driver.
+ See also Documentation/acpi-hotkey.txt.
+
ad1816= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
See also Documentation/sound/oss/AD1816.
in the kernel as they aren't compatible with hotplug or PCI domains or
having sane locking.
-pcibios_present() and Since ages, you don't need to test presence
-pci_present() of PCI subsystem when trying to talk to it.
- If it's not there, the list of PCI devices
- is empty and all functions for searching for
- devices just return NULL.
-pcibios_(read|write)_* Superseded by their pci_(read|write)_*
- counterparts.
-pcibios_find_* Superseded by their pci_get_* counterparts.
-pci_for_each_dev() Superseded by pci_get_device()
-pci_for_each_dev_reverse() Superseded by pci_find_device_reverse()
-pci_for_each_bus() Superseded by pci_find_next_bus()
pci_find_device() Superseded by pci_get_device()
pci_find_subsys() Superseded by pci_get_subsys()
pci_find_slot() Superseded by pci_get_slot()
-pcibios_find_class() Superseded by pci_get_class()
-pci_find_class() Superseded by pci_get_class()
-pci_(read|write)_*_nodev() Superseded by pci_bus_(read|write)_*()
M: greg@kroah.com
S: Maintained
+PCIE HOTPLUG DRIVER
+P: Kristen Carlson Accardi
+M: kristen.c.accardi@intel.com
+L: pcihpd-discuss@lists.sourceforge.net
+S: Maintained
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+SHPC HOTPLUG DRIVER
+P: Kristen Carlson Accardi
+M: kristen.c.accardi@intel.com
+L: pcihpd-discuss@lists.sourceforge.net
+S: Maintained
+
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com
/* 310 */ .long sys_request_key
.long sys_keyctl
.long sys_semtimedop
+/* vserver */ .long sys_ni_syscall
+ .long sys_ioprio_set
+/* 315 */ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
__syscall_end:
.rept NR_syscalls - (__syscall_end - __syscall_start) / 4
* 28-Sep-2004 BJD Updates for new serial port bits
* 04-Nov-2004 BJD Updated UART configuration process
* 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
+ * 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
IODESC_ENT(USBHOST),
IODESC_ENT(CLKPWR),
IODESC_ENT(LCD),
- IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(ADC),
- IODESC_ENT(WATCHDOG)
+ IODESC_ENT(WATCHDOG),
};
static struct resource s3c_uart0_resource[] = {
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
+ depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
ENTRY(cpu_v6_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
- if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
|| ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
) {
- if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat32Sign( a );
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
- if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
|| ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
) {
- if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
- float_raise( float_flag_invalid );
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloat64Sign( a );
) {
if ( floatx80_is_signaling_nan( a )
|| floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
}
return 0;
}
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- roundData->exception |= float_flag_invalid;
+ float_raise( float_flag_invalid );
return 0;
}
return
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- if ( floatx80_is_signaling_nan( a )
- || floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
|| ( ( extractFloatx80Exp( b ) == 0x7FFF )
&& (bits64) ( extractFloatx80Frac( b )<<1 ) )
) {
- if ( floatx80_is_signaling_nan( a )
- || floatx80_is_signaling_nan( b ) ) {
- roundData->exception |= float_flag_invalid;
- }
+ /* Do nothing, even if NaN as we're quiet */
return 0;
}
aSign = extractFloatx80Sign( a );
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
-
-/*
- * WARNING - magic here
- *
- * Ok, this is a horrid hack below, but marginally better than the
- * alternatives. What we really want is just to initialize
- * hvReleaseData in C as in the #if 0 section here. However, gcc
- * refuses to believe that (u32)&x is a constant expression, so will
- * not allow the xMsNucDataOffset field to be properly initialized.
- * So, we declare hvReleaseData in inline asm instead. We use inline
- * asm, rather than a .S file, because the assembler won't generate
- * the necessary relocation for the LparMap either, unless that symbol
- * is declared in the same source file. Finally, we put the asm in a
- * dummy, attribute-used function, instead of at file scope, because
- * file scope asms don't allow contraints. We want to use the "i"
- * constraints to put sizeof() and offsetof() expressions in there,
- * because including asm/offsets.h in C code then stringifying causes
- * all manner of warnings.
- */
-#if 0
struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xSlicNacaAddr = &naca, /* 64-bit Naca address */
- .xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
+ .xMsNucDataOffset = LPARMAP_PHYS,
.xFlags = HVREL_TAGSINACTIVE /* tags inactive */
/* 64 bit */
/* shared processors */
0xa7, 0x40, 0xf2, 0x4b,
0xf4, 0x4b, 0xf6, 0xf4 },
};
-#endif
-
-
-extern struct HvReleaseData hvReleaseData;
-
-static void __attribute_used__ hvReleaseData_wrapper(void)
-{
- /* This doesn't appear to need any alignment (even 4 byte) */
- asm volatile (
- " lparMapPhys = xLparMap - %3\n"
- " .data\n"
- " .globl hvReleaseData\n"
- "hvReleaseData:\n"
- " .long 0xc8a5d9c4\n" /* xDesc */
- /* "HvRD" in ebcdic */
- " .short %0\n" /* xSize */
- " .short %1\n" /* xVpdAreasPtrOffset */
- " .llong naca\n" /* xSlicNacaAddr */
- " .long lparMapPhys\n" /* xMsNucDataOffset */
- " .long 0\n" /* xRsvd1 */
- " .short %2\n" /* xFlags */
- " .short 4\n" /* xVrmIndex - v5r2m0 */
- " .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */
- " .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */
- " .long 0xd38995a4\n" /* xVrmName */
- " .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */
- " .long 0xf44bf6f4\n"
- " . = hvReleaseData + %0\n"
- " .previous\n"
- : : "i"(sizeof(hvReleaseData)),
- "i"(offsetof(struct naca_struct, xItVpdAreas)),
- "i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
- /* shared processors, HMT allowed */
- | 6), /* TEMP: This allows non-GA drivers */
- "i"(KERNELBASE)
- );
-}
-
-struct LparMap __attribute__((aligned (16))) xLparMap = {
- .xNumberEsids = HvEsidsToMap,
- .xNumberRanges = HvRangesToMap,
- .xSegmentTableOffs = STAB0_PAGE,
-
- .xEsids = {
- { .xKernelEsid = GET_ESID(KERNELBASE),
- .xKernelVsid = KERNEL_VSID(KERNELBASE), },
- { .xKernelEsid = GET_ESID(VMALLOCBASE),
- .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
- },
-
- .xRanges = {
- { .xPages = HvPagesToMap,
- .xOffset = 0,
- .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
- },
- },
-};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
+
+ifeq ($(CONFIG_PPC_ISERIES),y)
+arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
+AFLAGS_head.o += -Iarch/ppc64/kernel
+endif
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/hvcall.h>
+#include <asm/iSeries/LparMap.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
.globl fwnmi_data_area
fwnmi_data_area:
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+#include "lparmap.s"
+#endif /* CONFIG_PPC_ISERIES */
+
/*
* Vectors for the FWNMI option. Share common code.
*/
--- /dev/null
+/*
+ * Copyright (C) 2005 Stephen Rothwell IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/iSeries/LparMap.h>
+
+const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
+ .xNumberEsids = HvEsidsToMap,
+ .xNumberRanges = HvRangesToMap,
+ .xSegmentTableOffs = STAB0_PAGE,
+
+ .xEsids = {
+ { .xKernelEsid = GET_ESID(KERNELBASE),
+ .xKernelVsid = KERNEL_VSID(KERNELBASE), },
+ { .xKernelEsid = GET_ESID(VMALLOCBASE),
+ .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+ },
+
+ .xRanges = {
+ { .xPages = HvPagesToMap,
+ .xOffset = 0,
+ .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+ },
+ },
+};
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER*/
-int acpi_specific_hotkey_enabled;
+int acpi_specific_hotkey_enabled = TRUE;
EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
static unsigned int acpi_irq_irq;
int __init
acpi_hotkey_setup(char *str)
{
- acpi_specific_hotkey_enabled = TRUE;
+ acpi_specific_hotkey_enabled = FALSE;
return 1;
}
-__setup("acpi_specific_hotkey", acpi_hotkey_setup);
+__setup("acpi_generic_hotkey", acpi_hotkey_setup);
/*
* max_cstate is defined in the base kernel so modules can
pr_debug("device class '%s': release.\n", cd->class_id);
+ if (cd->devt_attr) {
+ kfree(cd->devt_attr);
+ cd->devt_attr = NULL;
+ }
+
if (cls->release)
cls->release(cd);
else {
if (class_dev->dev)
sysfs_remove_link(&class_dev->kobj, "device");
- if (class_dev->devt_attr) {
+ if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
- kfree(class_dev->devt_attr);
- class_dev->devt_attr = NULL;
- }
class_device_remove_attrs(class_dev);
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHP_H
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
}
}
-static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
+void disable_msi_mode(struct pci_dev *dev, int pos, int type)
{
u16 control;
if (!pci_msi_enable || !dev)
return status;
+ if (dev->no_msi)
+ return status;
+
temp = dev->irq;
if ((status = msi_init()) < 0)
#define pci_msi_quirk 0
#endif
+#ifdef CONFIG_PCI_MSI
+void disable_msi_mode(struct pci_dev *dev, int pos, int type);
+#else
+static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
+#endif
+
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct class_device_attribute class_device_attr_cpuaffinity;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+ disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+ PCI_CAP_ID_MSI);
+ dev->no_msi = 1;
+
+ printk(KERN_WARNING "PCI: PXH quirk detected, "
+ "disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
goto exit;
}
- x = le16_to_cpu(*(__le16 *) &data[2]);
- y = le16_to_cpu(*(__le16 *) &data[4]);
-
input_regs(dev, regs);
if (data[1] & 0x10) { /* in prox */
}
}
- if (data[1] & 0x80) {
+ if (data[1] & 0x90) {
+ x = le16_to_cpu(*(__le16 *) &data[2]);
+ y = le16_to_cpu(*(__le16 *) &data[4]);
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
- }
- if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
- input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
- input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
- input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+ if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+ input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+ input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+ input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+ input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+ }
}
input_report_key(dev, wacom->tool[0], data[1] & 0x10);
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
- return;
+ goto exit;
if (wacom->features->type >= INTUOS3) {
input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* mon_main.c: Main file, module initiation and exit, registrations, etc.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#include <linux/kernel.h>
mondir = debugfs_create_dir("usbmon", NULL);
if (IS_ERR(mondir)) {
- printk(KERN_NOTICE TAG ": debugs is not available\n");
+ printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
}
if (mondir == NULL) {
/*
* The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#ifndef __USB_MON_H
{
jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
+ if (is_bad_inode(inode) ||
+ (JFS_IP(inode)->fileset != cpu_to_le32(FILESYSTEM_I)))
+ return;
+
if (test_cflag(COMMIT_Freewmap, inode))
jfs_free_zero_link(inode);
static bio_end_io_t lbmIODone;
static void lbmStartIO(struct lbuf * bp);
static void lmGCwrite(struct jfs_log * log, int cant_block);
-static int lmLogSync(struct jfs_log * log, int nosyncwait);
+static int lmLogSync(struct jfs_log * log, int hard_sync);
* if new sync address is available
* (normally the case if sync() is executed by back-ground
* process).
- * if not, explicitly run jfs_blogsync() to initiate
- * getting of new sync address.
* calculate new value of i_nextsync which determines when
* this code is called again.
*
* PARAMETERS: log - log structure
- * nosyncwait - 1 if called asynchronously
+ * hard_sync - 1 to force all metadata to be written
*
* RETURN: 0
*
* serialization: LOG_LOCK() held on entry/exit
*/
-static int lmLogSync(struct jfs_log * log, int nosyncwait)
+static int lmLogSync(struct jfs_log * log, int hard_sync)
{
int logsize;
int written; /* written since last syncpt */
unsigned long flags;
/* push dirty metapages out to disk */
- list_for_each_entry(sbi, &log->sb_list, log_list) {
- filemap_flush(sbi->ipbmap->i_mapping);
- filemap_flush(sbi->ipimap->i_mapping);
- filemap_flush(sbi->direct_inode->i_mapping);
- }
+ if (hard_sync)
+ list_for_each_entry(sbi, &log->sb_list, log_list) {
+ filemap_fdatawrite(sbi->ipbmap->i_mapping);
+ filemap_fdatawrite(sbi->ipimap->i_mapping);
+ filemap_fdatawrite(sbi->direct_inode->i_mapping);
+ }
+ else
+ list_for_each_entry(sbi, &log->sb_list, log_list) {
+ filemap_flush(sbi->ipbmap->i_mapping);
+ filemap_flush(sbi->ipimap->i_mapping);
+ filemap_flush(sbi->direct_inode->i_mapping);
+ }
/*
* forward syncpt
/* next syncpt trigger = written + more */
log->nextsync = written + more;
- /* return if lmLogSync() from outside of transaction, e.g., sync() */
- if (nosyncwait)
- return lsn;
-
/* if number of bytes written from last sync point is more
* than 1/4 of the log size, stop new transactions from
* starting until all current transactions are completed
*
* FUNCTION: write log SYNCPT record for specified log
*
- * PARAMETERS: log - log structure
+ * PARAMETERS: log - log structure
+ * hard_sync - set to 1 to force metadata to be written
*/
-void jfs_syncpt(struct jfs_log *log)
+void jfs_syncpt(struct jfs_log *log, int hard_sync)
{ LOG_LOCK(log);
- lmLogSync(log, 1);
+ lmLogSync(log, hard_sync);
LOG_UNLOCK(log);
}
extern int lmGroupCommit(struct jfs_log *, struct tblock *);
extern int jfsIOWait(void *);
extern void jfs_flush_journal(struct jfs_log * log, int wait);
-extern void jfs_syncpt(struct jfs_log *log);
+extern void jfs_syncpt(struct jfs_log *log, int hard_sync);
#endif /* _H_JFS_LOGMGR */
* synchronize with logsync barrier
*/
if (test_bit(log_SYNCBARRIER, &log->flag)) {
+ TXN_UNLOCK();
+
+ /* write dirty metadata & forward log syncpt */
+ jfs_syncpt(log, 1);
+
jfs_info("log barrier off: 0x%x", log->lsn);
/* enable new transactions start */
/* wakeup all waitors for logsync barrier */
TXN_WAKEUP(&log->syncwait);
- TXN_UNLOCK();
-
- /* forward log syncpt */
- jfs_syncpt(log);
-
goto wakeup;
}
}
/* only anonymous txn.
* Remove from anon_list
*/
+ TXN_LOCK();
list_del_init(&jfs_ip->anon_inode_list);
+ TXN_UNLOCK();
}
jfs_ip->atlhead = tlck->next;
} else {
{
struct jfs_inode_info *ji = JFS_IP(inode);
+ BUG_ON(!list_empty(&ji->anon_inode_list));
+
spin_lock_irq(&ji->ag_lock);
if (ji->active_ag != -1) {
struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
/* log == NULL indicates read-only mount */
if (log) {
jfs_flush_journal(log, wait);
- jfs_syncpt(log);
+ jfs_syncpt(log, 0);
}
return 0;
svc_exit_thread(rqstp);
/* Release module */
+ unlock_kernel();
module_put_and_exit(0);
}
#endif
#define __NR_vserver (__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init (__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318)
/*
* The following SWIs are ARM private.
};
#define desc_empty(desc) \
- (!((desc)->a + (desc)->b))
+ (!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) \
(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
#ifndef _LPARMAP_H
#define _LPARMAP_H
+#ifndef __ASSEMBLY__
+
#include <asm/types.h>
/*
} xRanges[HvRangesToMap];
};
-extern struct LparMap xLparMap;
+extern const struct LparMap xLparMap;
+
+#endif /* __ASSEMBLY__ */
+
+/* the fixed address where the LparMap exists */
+#define LPARMAP_PHYS 0x7000
#endif /* _LPARMAP_H */
#define ID_MASK 0x00200000
#define desc_empty(desc) \
- (!((desc)->a + (desc)->b))
+ (!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) \
(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
/* keep track of device state */
unsigned int is_enabled:1; /* pci_enable_device has been called */
unsigned int is_busmaster:1; /* device is busmaster */
-
+ unsigned int no_msi:1; /* device may not use msi */
+
u32 saved_config_space[16]; /* config space saved at suspend time */
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
#define PCI_DEVICE_ID_INTEL_21145 0x0039
+#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320
+#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321
+#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329
+#define PCI_DEVICE_ID_INTEL_PXH_1 0x032A
+#define PCI_DEVICE_ID_INTEL_PXHV 0x032C
#define PCI_DEVICE_ID_INTEL_82375 0x0482
#define PCI_DEVICE_ID_INTEL_82424 0x0483
#define PCI_DEVICE_ID_INTEL_82378 0x0484
{
struct task_struct *t;
- if (p->flags & SIGNAL_GROUP_EXIT)
+ if (p->signal->flags & SIGNAL_GROUP_EXIT)
/*
* The process is in the middle of dying already.
*/
{
*t = NULL;
*m = 0;
- return Z_DATA_ERROR;
+ return Z_OK;
}
u16 flags;
/* All of a TSO frame must be composed of paged data. */
- BUG_ON(skb->len != skb->data_len);
+ if (skb->len != skb->data_len)
+ return tcp_fragment(sk, skb, len, mss_now);
buff = sk_stream_alloc_pskb(sk, 0, 0, GFP_ATOMIC);
if (unlikely(buff == NULL))
sent_pkts = 0;
while ((skb = sk->sk_send_head)) {
+ unsigned int limit;
+
tso_segs = tcp_init_tso_segs(sk, skb, mss_now);
BUG_ON(!tso_segs);
break;
}
+ limit = mss_now;
if (tso_segs > 1) {
- u32 limit = tcp_window_allows(tp, skb,
- mss_now, cwnd_quota);
+ limit = tcp_window_allows(tp, skb,
+ mss_now, cwnd_quota);
if (skb->len < limit) {
unsigned int trim = skb->len % mss_now;
if (trim)
limit = skb->len - trim;
}
- if (skb->len > limit) {
- if (tso_fragment(sk, skb, limit, mss_now))
- break;
- }
- } else if (unlikely(skb->len > mss_now)) {
- if (unlikely(tcp_fragment(sk, skb, mss_now, mss_now)))
- break;
}
+ if (skb->len > limit &&
+ unlikely(tso_fragment(sk, skb, limit, mss_now)))
+ break;
+
TCP_SKB_CB(skb)->when = tcp_time_stamp;
if (unlikely(tcp_transmit_skb(sk, skb_clone(skb, GFP_ATOMIC))))
cwnd_quota = tcp_snd_test(sk, skb, mss_now, TCP_NAGLE_PUSH);
if (likely(cwnd_quota)) {
+ unsigned int limit;
+
BUG_ON(!tso_segs);
+ limit = mss_now;
if (tso_segs > 1) {
- u32 limit = tcp_window_allows(tp, skb,
- mss_now, cwnd_quota);
+ limit = tcp_window_allows(tp, skb,
+ mss_now, cwnd_quota);
if (skb->len < limit) {
unsigned int trim = skb->len % mss_now;
if (trim)
limit = skb->len - trim;
}
- if (skb->len > limit) {
- if (unlikely(tso_fragment(sk, skb, limit, mss_now)))
- return;
- }
- } else if (unlikely(skb->len > mss_now)) {
- if (unlikely(tcp_fragment(sk, skb, mss_now, mss_now)))
- return;
}
+ if (skb->len > limit &&
+ unlikely(tso_fragment(sk, skb, limit, mss_now)))
+ return;
+
/* Send it out now. */
TCP_SKB_CB(skb)->when = tcp_time_stamp;
if (!raw_sk) {
if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
IP6_INC_STATS_BH(IPSTATS_MIB_INUNKNOWNPROTOS);
- icmpv6_param_prob(skb, ICMPV6_UNK_NEXTHDR, nhoff);
+ icmpv6_send(skb, ICMPV6_PARAMPROB,
+ ICMPV6_UNK_NEXTHDR, nhoff,
+ skb->dev);
}
- } else {
+ } else
IP6_INC_STATS_BH(IPSTATS_MIB_INDELIVERS);
- kfree_skb(skb);
- }
+ kfree_skb(skb);
}
rcu_read_unlock();
return 0;
if (skb->ip_summed != CHECKSUM_UNNECESSARY) {
if (skb->ip_summed == CHECKSUM_HW) {
+ skb_postpull_rcsum(skb, skb->nh.raw,
+ skb->h.raw - skb->nh.raw);
skb->ip_summed = CHECKSUM_UNNECESSARY;
if (csum_ipv6_magic(&skb->nh.ipv6h->saddr,
&skb->nh.ipv6h->daddr,
projects / linux-2.6 / commitdiff